localrepo: stop doing special dirstate backup at transaction open
Since the dirstate writes are already managed by the transaction, we already do
a backup of the dirstate when necessary (and even trigger one to keep `hg
rollback` happy).
We needs some special code to deal with the initial empty checkout, but it is
not too complicated.
Managing variable filename (as dirstate-v2 uses) at the "journalfile" level, is
complex and fragile (which is consistent with the fact these files are not
journal…). If we no longer do it, our life is significantly simpler.
In some sense, we apply the xkcd-1134¹ solution to our savebackup/restorebackup
problem.
[1] https://xkcd.com/1134/
(the change to test-hardlink are expect as decreasing the number of duplicated
backup drive the hardlink count down)
Test wire protocol argument passing
Setup repo:
$ hg init repo
Local:
$ hg debugwireargs repo eins zwei --three drei --four vier
eins zwei drei vier None
$ hg debugwireargs repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs repo eins zwei
eins zwei None None None
$ hg debugwireargs repo eins zwei --five fuenf
eins zwei None None fuenf
HTTP:
$ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid \
> -E error.log -A access.log \
> --config experimental.httppostargs=yes
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
HTTP without args-in-POST:
$ hg serve -R repo -p $HGPORT1 -d --pid-file=hg1.pid -E error.log -A access.log
$ cat hg1.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT1/ \ un deux trois\ qu\ \ atre
un deux trois qu atre None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ eins zwei --five fuenf
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT1/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
$ cat error.log
$ cat access.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:39* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:43* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:27* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:17* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "POST /?cmd=debugwireargs HTTP/1.1" 200 - x-hgargs-post:1033* (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
HTTP without the httpheader capability:
$ CAP=httpheader . "$TESTDIR/notcapable"
$ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
$ cat hg2.pid >> $DAEMON_PIDS
$ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
un deux trois quatre None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
eins zwei None None None
$ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
eins zwei None None None
$ cat error2.log
$ cat access2.log
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
* - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
$LOCALIP - - [$LOGDATE$] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
SSH (try to exercise the ssh functionality with a dummy script):
$ hg debugwireargs ssh://user@dummy/repo uno due tre quattro
uno due tre quattro None
$ hg debugwireargs ssh://user@dummy/repo eins zwei --four vier
eins zwei None vier None
$ hg debugwireargs ssh://user@dummy/repo eins zwei
eins zwei None None None
$ hg debugwireargs ssh://user@dummy/repo eins zwei --five fuenf
eins zwei None None None
Explicitly kill daemons to let the test exit on Windows
$ killdaemons.py