hg-stable: Graph

tests: add missing b prefix in test-context-metadata.t
2018-10-14, by Augie Fackler
context: raise runtime errors with sysstrs
2018-10-14, by Augie Fackler
rust: rustfmt config for hg-direct-ffi
2018-10-15, by Georges Racinet
rust: rustlazyancestors.__contains__
2018-10-08, by Georges Racinet
help: fix a missing quote character in ui.tweakdefaults
2018-10-14, by Matt Harbison
rust: hooking into Python code
2018-09-27, by Georges Racinet
py3: fix test-propertycache.py
2018-10-14, by Mark Thomas
py3: fix test-dirstate-race.t
2018-10-14, by Mark Thomas
help: adding a proper declaration for shortlist/basic commands (API)
2018-10-12, by Rodrigo Damazio
help: assigning topic categories
2018-10-12, by Rodrigo Damazio
help: assigning categories to existing commands
2018-10-13, by rdamazio
help: splitting the topics by category
2018-10-12, by Rodrigo Damazio
help: adding support for command categories
2018-10-13, by rdamazio
notify: just use email.errors
2018-10-14, by Yuya Nishihara
rust-chg: add struct holding information needed to spawn server process
2018-10-06, by Yuya Nishihara
rust-chg: install logger if $CHGDEBUG is set
2018-10-07, by Yuya Nishihara
rust-chg: depend on log and tokio_timer
2018-10-06, by Yuya Nishihara
rust-chg: suppress panic while writing chg error to stderr
2018-10-07, by Yuya Nishihara
logcmdutil: add a helpful assertion to catch mistyped templates early
2018-10-14, by Augie Fackler
notify: adapt to new location of email module's errors
2018-10-14, by Augie Fackler
notify: add some b prefixes
2018-10-14, by Augie Fackler
py3: fix test-diff-color.t
2018-10-14, by Mark Thomas
py3: fix test-revlog.t
2018-10-14, by Mark Thomas
fuzz: try *even harder* to prevent Python from looking up usernames
2018-10-14, by Augie Fackler
wireproto: fix incorrect function name in docstring
2018-10-14, by Connor Sheehan
py3: fix test-status.t
2018-10-13, by Mark Thomas
formatter: make debug output prettier
2018-10-14, by Yuya Nishihara
stringutil: allow to specify initial indent level of pprint()
2018-10-14, by Yuya Nishihara
stringutil: make level parameter of pprintgen() 0-origin
2018-10-14, by Yuya Nishihara
formatter: use stringutil.pprint() in debug output to drop b''
2018-10-14, by Yuya Nishihara
rust: exposing in parsers module
2018-09-27, by Georges Racinet
rust: iterator bindings to C code
2018-09-27, by Georges Racinet
rust: pure Rust lazyancestors iterator
2018-09-27, by Georges Racinet
run-tests: restore quoting the python executable for running *.py tests
2018-10-13, by Matt Harbison
tests: replace `cd ..` with an absolute path in a couple ssh tests
2018-10-13, by Matt Harbison
lfs: register the flag processors per repository
2018-10-04, by Matt Harbison
revlog: allow flag processors to be applied via store options
2018-10-09, by Matt Harbison
py3: use str to query registry values on Windows
2018-10-12, by Matt Harbison
py3: convert "usage" literal to bytes
2018-10-13, by Yuya Nishihara
churn: remove redundant round()
2018-10-13, by Augie Fackler
py3: use py3 as the test tag, dropping the k
2018-10-13, by Martijn Pieters
tests: fix inline extension in test-fncache.t for Python 3
2018-10-13, by Augie Fackler
py3: 3 more passing tests
2018-10-13, by Augie Fackler
simplemerge: port to Python 3
2018-10-13, by Augie Fackler
contrib: fix up output in check-config.py to use strs to avoid b prefixes
2018-10-13, by Augie Fackler
context: open files in bytes mode
2018-10-13, by Augie Fackler
tests: fix up test-hghave for recent run-tests change to use more CPUs
2018-10-13, by Augie Fackler
py3: fix test-parse-date.t
2018-10-13, by Mark Thomas
obsolete: don't translate internal error message
2018-10-12, by Yuya Nishihara
py3: get around unicode docstrings in test-encoding-textwrap.t and test-help.t
2018-10-12, by Yuya Nishihara
crecord: make enter move cursor down to the next item of the same type
2018-10-13, by Anton Shestakov
py3: fix infinitepush extension tests
2018-10-13, by Mark Thomas
py3: build help of compression engines in bytes
2018-10-13, by Yuya Nishihara
py3: do I/O in bytes in test-help.t
2018-10-13, by Yuya Nishihara
tests: accept slightly different zip file in Python 3
2018-10-13, by Augie Fackler
webcommands: use stringutil.pprint() to repr invalid archive types
2018-10-13, by Augie Fackler
archival: don't try and fsdecode non-{bytes,str} objects
2018-10-13, by Augie Fackler
tests: fix last failure in test-tools.t
2018-10-13, by Augie Fackler
run-tests: run tests with as many processes as cores by default
2018-10-13, by Gregory Szorc
run-tests: print number of tests and parallel process count
2018-10-13, by Gregory Szorc
releasenotes: use stringutil.wrap() instead of handcrafted TextWrapper wrapper
2018-10-13, by Yuya Nishihara
match: optimize matcher when all patterns are of rootfilesin kind
2018-10-13, by Martin von Zweigbergk
churn: use integer division consistently
2018-10-13, by Augie Fackler
churn: fix stack traces on Python 3
2018-10-13, by Augie Fackler
py3: moar passing tests
2018-10-13, by Augie Fackler
py3: one new passing tests
2018-10-12, by Augie Fackler
tests: expand our coverage of errors in Python 3 for bad extensions
2018-10-12, by Augie Fackler
tests: add lots of globs and conditional output lines
2018-10-12, by Augie Fackler
releasenotes: fix remaining bytes/unicode issues caught by tests
2018-10-13, by Augie Fackler
relnotes: port to Python 3
2018-10-13, by Augie Fackler
py3: use __code__ instead of func_code to test if func is cachable
2018-10-13, by Yuya Nishihara
py3: pass in system string to vars(branchmap).__contains__()
2018-10-13, by Yuya Nishihara
test-bookmarks-pushpull: use correct tmp dir for no-bm-move.sh
2018-10-13, by Mark Thomas
py3: add some glob to make output compatible with python 3
2018-10-13, by Pulkit Goyal
py3: add a b'' prefix in tests/test-requires.t
2018-10-13, by Pulkit Goyal
py3: use '%d' for rev nums instead of '%s'
2018-10-13, by Pulkit Goyal
py3: more globing of things to make output compatible between py2 and py3
2018-10-13, by Pulkit Goyal
py3: use stringutil.pprint() instead of '%r'
2018-10-13, by Pulkit Goyal
py3: use '%d' for integers instead of '%s'
2018-10-13, by Pulkit Goyal
py3: add some py3 specific output to test
2018-10-13, by Pulkit Goyal
py3: use stringutil.pprint() in color.py instead of '%r'
2018-10-13, by Pulkit Goyal
py3: add b'' prefixes in tests/test-progress.t
2018-10-13, by Pulkit Goyal
py3: add b'' prefixes to tests/test-keyword.t
2018-10-13, by Pulkit Goyal
py3: use stringutil.pprint() if we are printing bool values
2018-10-13, by Pulkit Goyal
py3: glob some difference between py2 and py3 output
2018-10-13, by Pulkit Goyal
py3: byteify tests/wireprotosimplecache.py
2018-10-13, by Pulkit Goyal
py3: add b'' prefixes in tests/test-help.t
2018-10-13, by Pulkit Goyal
py3: use sys.stdout.buffer for binary output in tests/svnxml.py
2018-10-13, by Pulkit Goyal
py3: use '%s' instead of %r in hgext/convert/subversion.py
2018-10-13, by Pulkit Goyal
py3: make test-contrib-perf.t work on python 3
2018-10-13, by Pulkit Goyal
py3: add 3 more passing tests to whitelist caught by buildbot
2018-10-13, by Pulkit Goyal
py3: add some r'' prefixes in hgext/narrow/narrowwirepeer.py
2018-10-13, by Pulkit Goyal
py3: r'' prefix default values for mimetypes.guess_mime()
2018-10-12, by Gregory Szorc
absorb: update help text
2018-10-12, by Mark Thomas
fsmonitor: use vfs instead of opener (issue5938)
2018-10-12, by FUJIWARA Katsunori
tests: configure fsmonitor.mode=paranoid always if fsmonitor is used
2018-10-12, by FUJIWARA Katsunori
tests: drop files from exclusion list in test-check-module-imports.t
2018-10-08, by FUJIWARA Katsunori
tests: use NO_CHECK_EOF for fragments used to test importing via extension
2018-10-08, by FUJIWARA Katsunori
tests: use NO_CHECK_EOF for fragments having intentional error
2018-10-08, by FUJIWARA Katsunori
tests: fix style issue of importing order in test-lock.py
2018-10-08, by FUJIWARA Katsunori
tests: fix style issue of importing hgweb in embedded code fragments
2018-10-08, by FUJIWARA Katsunori
py3: encode str to bytes
2018-10-12, by Gregory Szorc
py3: sprinkle statprof.py with utf-8 encoding
2018-10-12, by Gregory Szorc
py3: flush stdout
2018-10-12, by Gregory Szorc
py3: use raw strings in statprof.py
2018-10-12, by Gregory Szorc
py3: switch from print(..., file=) to write()
2018-10-12, by Gregory Szorc
py3: use %d in a few places
2018-10-12, by Gregory Szorc
py3: use raw strings for stack names
2018-10-12, by Gregory Szorc
py3: use sysbytes for converting code attributes
2018-10-12, by Gregory Szorc
py3: use write() instead of print()
2018-10-12, by Gregory Szorc
py3: use %d to format ints
2018-10-12, by Gregory Szorc
py3: convert sorting field to sysstr
2018-10-12, by Gregory Szorc
py3: encode json output to bytes and use write()
2018-10-12, by Gregory Szorc
absorb: prompt user to accept absorb changes by default
2018-10-12, by Mark Thomas
templatefuncs: add truncate parameter to pad
2018-10-12, by Mark Thomas
absorb: print summary of changesets affected
2018-10-12, by Mark Thomas
absorb: use a formatter to generate output
2018-10-12, by Mark Thomas
tests: fix up test-bad-extension.t's inline extension
2018-10-12, by Augie Fackler
polib: update to latest release 1.0.7 (upstream rev d75ce6dbbc2a)
2018-10-12, by Augie Fackler
tests: glob away some annoying py3 differences
2018-10-12, by Augie Fackler