hg-stable: revision graph

graph

less more | rev 40867: (0) -30000 -10000 -3000 -1000 -120 +120 +1000 +3000 +10000 tip

remotefilelog: replace a "a=[expr]; b=a[0]" by "b=expr; a = [b]"
Tue, 04 Dec 2018 22:12:47 -0800, by Martin von Zweigbergk
remotefilelog: remove an unnecessary update of "count" container
Tue, 04 Dec 2018 22:09:33 -0800, by Martin von Zweigbergk
remotefilelog: avoid temporarily using "count" variable as synonym for "total"
Tue, 04 Dec 2018 21:58:46 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in fileserverclient
Wed, 05 Dec 2018 09:30:01 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in shallowrepo
Tue, 04 Dec 2018 16:32:59 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in shallowbundle
Tue, 04 Dec 2018 16:31:04 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in repack
Tue, 04 Dec 2018 16:29:05 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in remotefilelogserver
Tue, 04 Dec 2018 16:23:00 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper in basestore
Tue, 04 Dec 2018 16:09:20 -0800, by Martin von Zweigbergk
remotefilelog: use progress helper when analyzing repos
Tue, 04 Dec 2018 16:02:56 -0800, by Martin von Zweigbergk
fastannotate: use progress helper
Tue, 04 Dec 2018 15:59:47 -0800, by Martin von Zweigbergk
debugbuildannotatecache: use progress helper
Tue, 04 Dec 2018 15:57:11 -0800, by Martin von Zweigbergk
upgrade: clarify "aggressivemergedelta" handling
Fri, 13 Jul 2018 11:45:15 +0200, by Boris Feld
upgrade: test that fncache is valid after repository upgrade
Fri, 13 Jul 2018 02:54:52 +0200, by Boris Feld
tests: update `rm` invocation for new location of checklink
Wed, 05 Dec 2018 12:25:41 -0500, by Augie Fackler
bookflow: new extension for bookmark-based branching
Mon, 03 Dec 2018 14:17:38 -0500, by idlsoft
rust: make clean takes care of rust/target
Tue, 04 Dec 2018 17:03:43 +0000, by Georges Racinet
rust: rename local variables in AncestorsIterator::next
Tue, 04 Dec 2018 14:01:13 +0000, by Georges Racinet
tests: stabilize test-inherit-mode.t on FreeBSD and macOS again
Tue, 04 Dec 2018 17:34:10 -0500, by Augie Fackler
tests: drop redundant "#if execbit" from test-rebase-inmemory.t
Tue, 04 Dec 2018 08:50:33 -0800, by Martin von Zweigbergk
narrow: don't resurrect old commits when narrowing (don't strip obsmarkers)
Mon, 03 Dec 2018 16:56:09 -0800, by Martin von Zweigbergk
commandserver: turn server debug messages into logs
Sun, 18 Nov 2018 19:55:53 +0900, by Yuya Nishihara
commandserver: add config knob for various logging options
Sun, 18 Nov 2018 19:47:04 +0900, by Yuya Nishihara
commandserver: expand log path for convenience
Sat, 10 Nov 2018 19:27:47 +0900, by Yuya Nishihara
commandserver: switch logging facility to ui.log() interface
Sat, 10 Nov 2018 19:09:37 +0900, by Yuya Nishihara
commandserver: install logger to record server events through canonical API
Sat, 10 Nov 2018 19:00:17 +0900, by Yuya Nishihara
commandserver: enable logging when server process started
Sat, 10 Nov 2018 18:19:34 +0900, by Yuya Nishihara
test-commandserver: change way of triggering early crash
Sat, 10 Nov 2018 18:16:33 +0900, by Yuya Nishihara
loggingutil: add basic logger backends
Sun, 18 Nov 2018 18:58:06 +0900, by Yuya Nishihara
merge with stable
Tue, 04 Dec 2018 17:13:01 -0500, by Augie Fackler
rust: peek_mut optim for lazy ancestors
Thu, 29 Nov 2018 09:13:13 +0000, by Georges Racinet
fuzz: grep away HAVE_GETC_UNLOCKED in pyconfig.h to avoid msan badness
Mon, 03 Dec 2018 18:07:09 -0500, by Augie Fackler
fuzz: more correctly specify CFLAGS and LDFLAGS when building Python
Tue, 13 Nov 2018 09:19:05 -0500, by Augie Fackler
tests: stabilize test-blackbox.t on Windows
Tue, 04 Dec 2018 00:19:33 -0500, by Matt Harbison
tests: stabilize for recent wcache changes
Tue, 04 Dec 2018 00:16:12 -0500, by Matt Harbison
extdiff: avoid double backslashes in the displayed tool path on Windows
Mon, 03 Dec 2018 12:48:42 -0500, by Matt Harbison
contrib: add a helper script that help to build interesting repositories
Wed, 28 Nov 2018 05:06:58 +0100, by Boris Feld
py3: listify filter() to call len() on it
Mon, 03 Dec 2018 19:42:46 +0300, by Pulkit Goyal
loggingutil: document openlogfile()
Sun, 18 Nov 2018 18:35:31 +0900, by Yuya Nishihara
loggingutil: extract openlogfile() and proxylogger to new module
Sun, 18 Nov 2018 18:25:37 +0900, by Yuya Nishihara
blackbox: pass in options to _openlogfile() as arguments
Sun, 18 Nov 2018 18:21:39 +0900, by Yuya Nishihara
blackbox: just try writing to repo.vfs and update lastlogger on success
Sat, 17 Nov 2018 22:10:27 +0900, by Yuya Nishihara
vfs: add option to not create parent directories implicitly
Tue, 20 Nov 2018 22:31:12 +0900, by Yuya Nishihara
repo: add a `wcachevfs` to access the `.hg/wcache/` directory
Thu, 15 Nov 2018 02:55:33 +0100, by Boris Feld
cache: create `wcache` directory at init time
Thu, 15 Nov 2018 02:46:31 +0100, by Boris Feld
cache: create `cache` directory at init time
Thu, 15 Nov 2018 02:38:55 +0100, by Boris Feld
check-exec: write file in 'wcache' instead of 'cache'
Thu, 15 Nov 2018 17:08:23 +0100, by Boris Feld
mmapindex: set default to 1MB
Fri, 23 Nov 2018 06:09:44 +0100, by Boris Feld
mmapindex: move the 'mmapindexthreshold' option out of experimental
Fri, 23 Nov 2018 06:07:33 +0100, by Boris Feld
perf: add a --rev attribute to perfindex
Sat, 01 Dec 2018 15:57:27 +0100, by Boris Feld
perf: update perfindex to be more realistic
Fri, 23 Nov 2018 06:03:38 +0100, by Boris Feld
match: drop unnecessary wrapping of regex in group
Sun, 02 Dec 2018 13:09:46 -0800, by Martin von Zweigbergk
match: use _BASE_SIZE instead of magic value 4
Sun, 02 Dec 2018 13:45:20 -0800, by Martin von Zweigbergk
match: make "groupsize" include the trailing "|"
Sun, 02 Dec 2018 13:44:49 -0800, by Martin von Zweigbergk
match: fix an unaligned (but harmless) indent
Sun, 02 Dec 2018 13:09:43 -0800, by Martin von Zweigbergk
match: raise an Abort error instead of OverflowError
Thu, 22 Nov 2018 17:41:10 +0100, by Boris Feld
match: avoid translating glob to matcher multiple times for large sets
Thu, 22 Nov 2018 21:02:02 +0100, by Boris Feld
match: extract function that group regexps
Thu, 22 Nov 2018 17:25:49 +0100, by Boris Feld
match: test for overflow error in pattern
Thu, 22 Nov 2018 17:16:05 +0100, by Boris Feld
match: extract a literal constant into a symbolic one
Thu, 22 Nov 2018 17:20:32 +0100, by Boris Feld
tests: apply binary mode to output in seq.py
Sat, 01 Dec 2018 21:42:48 -0500, by Matt Harbison
perf: add a `--clear-caches` to `perfbranchmapupdate`
Fri, 23 Nov 2018 01:09:37 +0100, by Boris Feld
perf: start from an existing branchmap if possible
Wed, 21 Nov 2018 21:11:47 +0000, by Boris Feld
perf: rely on repoview for perfbranchmapupdate
Wed, 21 Nov 2018 20:35:22 +0000, by Boris Feld
perf: pre-indent some code in `perfbranchmapupdate`
Wed, 21 Nov 2018 22:56:06 +0100, by Boris Feld
perf: add a `perfbranchmapupdate` command
Wed, 21 Nov 2018 12:02:25 +0000, by Boris Feld
push: config option to control behavior when pushing to a publishing server
Mon, 05 Nov 2018 13:52:19 +0800, by Anton Shestakov
narrowcommands: remove an unrequired `repo.narrowpats` call
Fri, 30 Nov 2018 17:42:55 +0300, by Pulkit Goyal
manifest: reject lines shorter than 42 bytes, not 22
Thu, 29 Nov 2018 16:44:01 -0500, by Augie Fackler
blackbox: initialize logger with repo instance
Sun, 11 Nov 2018 20:05:38 +0900, by Yuya Nishihara
blackbox: do not nullify repo to deactivate the logger on failure
Sat, 17 Nov 2018 20:56:25 +0900, by Yuya Nishihara
blackbox: extract global last logger to proxylogger class
Sun, 11 Nov 2018 20:02:34 +0900, by Yuya Nishihara
ui: pass in bytes opts dict to logger.log()
Sun, 11 Nov 2018 19:36:21 +0900, by Yuya Nishihara
ui: pass in formatted message to logger.log()
Sun, 11 Nov 2018 19:35:33 +0900, by Yuya Nishihara
blackbox: send debug message to logger by core ui
Sun, 11 Nov 2018 17:34:46 +0900, by Yuya Nishihara
blackbox: change the way of deactivating the logger on write error
Sat, 17 Nov 2018 20:23:50 +0900, by Yuya Nishihara
match: remove obsolete catching of OverflowError
Wed, 28 Nov 2018 10:12:50 -0800, by Martin von Zweigbergk
sparse: raise a move verbose index error from the C code
Tue, 27 Nov 2018 02:10:14 +0100, by Boris Feld
narrow: drop the bundle2 capability since we have server capabilities (BC)
Fri, 05 Oct 2018 23:10:56 +0300, by Pulkit Goyal
vfs: extract the audit path logic into a submethod
Sun, 02 Jul 2017 04:06:24 +0200, by Boris Feld
subrepo-git: use an official origvfs when appropriate
Thu, 22 Nov 2018 20:01:28 +0100, by Boris Feld
revert: extract origvfs logic in a sub-function
Thu, 22 Nov 2018 19:26:05 +0100, by Boris Feld
vfs: treat 'undo.' file the same as 'journal.' file
Thu, 22 Nov 2018 18:44:07 +0100, by Boris Feld
perf: add a perfignore command
Thu, 22 Nov 2018 21:00:13 +0100, by Boris Feld
py3: use pycompat.xrange instead of xrange
Mon, 26 Nov 2018 15:36:06 +0300, by Pulkit Goyal
store: write fncache only once if there are both adds and removes
Tue, 27 Nov 2018 16:16:13 +0300, by Pulkit Goyal
perf: disable revlogs clearing in `perftags` by default
Tue, 20 Nov 2018 17:44:24 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perfbookmarks`
Tue, 20 Nov 2018 10:55:20 +0000, by Boris Feld
tags: cache `repo.changelog` access when checking tags nodes
Tue, 20 Nov 2018 10:38:15 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perftags`
Tue, 20 Nov 2018 10:46:20 +0000, by Boris Feld
perf: stop creating new revlog by hand in perftags
Sun, 25 Nov 2018 13:37:53 +0100, by Boris Feld
revlog: update the documentation for `trim_endidx`
Mon, 26 Nov 2018 00:23:12 +0100, by Boris Feld
revlog: properly detect corrupted revlog in `index_get_length`
Mon, 26 Nov 2018 00:21:09 +0100, by Boris Feld
perf: rename `perfhelper-tracecopies` to `perfhelper-pathcopies`
Mon, 26 Nov 2018 00:15:12 +0100, by Boris Feld
perf: add a docstring to `perfpathcopies`
Mon, 26 Nov 2018 00:13:50 +0100, by Boris Feld
revlog: update the docstring of `ancestors` to match reality
Mon, 26 Nov 2018 00:08:11 +0100, by Boris Feld
remotefilelog: fix typo in docstring
Mon, 26 Nov 2018 15:53:34 -0500, by Augie Fackler
store: append to fncache if there are only new files to write
Fri, 23 Nov 2018 18:58:16 +0300, by Pulkit Goyal
py3: fix couple of division operator to do integer divison
Mon, 26 Nov 2018 15:38:35 +0300, by Pulkit Goyal
py3: use dict.items() instead of dict.iteritems()
Mon, 26 Nov 2018 15:37:48 +0300, by Pulkit Goyal
py3: convert strings to bytes in tests/test-remotefilelog-histpack.py
Mon, 26 Nov 2018 15:36:51 +0300, by Pulkit Goyal
py3: replace str() with pycompat.bytestr() or ('%d' % int)
Fri, 23 Nov 2018 21:54:03 +0300, by Pulkit Goyal
perf: add a `--timing` argument to `perfhelper-tracecopies`
Fri, 23 Nov 2018 19:32:51 +0100, by Boris Feld
ui: manage logger instances and event filtering by core ui
Sun, 11 Nov 2018 18:08:33 +0900, by Yuya Nishihara
extensions: add "uipopulate" hook, called per instance, not per process
Mon, 12 Nov 2018 21:10:51 +0900, by Yuya Nishihara
hgweb: load globally-enabled extensions explicitly
Sat, 17 Nov 2018 19:11:45 +0900, by Yuya Nishihara
tests: disable remotefilelog on Windows
Sat, 24 Nov 2018 14:11:02 -0500, by Matt Harbison
perf: run 'setup' function during stub run
Thu, 22 Nov 2018 23:48:44 +0100, by Boris Feld
perf: fallback to subset if ondisk cache is missing in perfbranchmapload
Fri, 23 Nov 2018 02:08:01 +0100, by Boris Feld
perf: prewarm the branchmap in perfbranchmapload
Fri, 23 Nov 2018 02:11:11 +0100, by Boris Feld
localrepo: correct docstring of filectx()
Sun, 25 Nov 2018 22:39:54 +0900, by Yuya Nishihara
annotate: remove dead code to not convert path to relative path
Sat, 24 Nov 2018 20:05:55 +0900, by Yuya Nishihara
annotate: start pager soon after command options are validated
Sat, 24 Nov 2018 18:41:44 +0900, by Yuya Nishihara
annotate: check and update command options first
Sat, 24 Nov 2018 18:38:44 +0900, by Yuya Nishihara
annotate: format local tables in less-dense form
Sat, 24 Nov 2018 18:36:44 +0900, by Yuya Nishihara
perf: rename version flag of perfchangegroupchangelog to cgversion
Thu, 22 Nov 2018 18:14:21 +0300, by Pulkit Goyal
procutil: don't allow the main 'hg' script to be treated as the Windows exe
Fri, 23 Nov 2018 22:27:57 -0500, by Matt Harbison
remotefilelog: drop some compatibility cruft for finding the hg exeutable
Fri, 23 Nov 2018 22:18:56 -0500, by Matt Harbison
branchmap: build the revbranchcache._namesreverse() only when required
Wed, 21 Nov 2018 17:17:26 +0300, by Pulkit Goyal
sparse-revlog: put the native implementation of slicechunktodensity to use
Thu, 15 Nov 2018 11:11:38 +0100, by Boris Feld

less more | rev 40867: (0) -30000 -10000 -3000 -1000 -120 +120 +1000 +3000 +10000 tip

Mercurial > hg-stable

graph