rust-nodemap: special case for prefixes of NULL_NODE We have to behave as though NULL_NODE was stored in the node tree, although we don't store it. Differential Revision: https://phab.mercurial-scm.org/D7798

rust-nodemap: pure Rust example To run, use `cargo run --release --example nodemap` This demonstrates that simple scenarios entirely written in Rust can content themselves with `NodeTree<T>`. The example mmaps both the nodemap file and the changelog index. We had of course to include an implementation of `RevlogIndex` directly, which isn't much at this stage. It felt a bit prematurate to include it in the lib. Here are some first performance measurements, obtained with this example, on a clone of mozilla-central with 440000 changesets: (create) Nodemap constructed in RAM in 153.638305ms (query CAE63161B68962) found in 22.362us: Ok(Some(269489)) (bench) Did 3 queries in 36.418µs (mean 12.139µs) (bench) Did 50 queries in 184.318µs (mean 3.686µs) (bench) Did 100000 queries in 31.053461ms (mean 310ns) To be fair, even between bench runs, results tend to depend whether the file is still in kernel caches, and it's not so easy to get back to a real cold start. The worst we've seen was in the 50us ballpark. In any busy server setting, the pages would always be in RAM. We hope it's good enough not to be significantly slower on any concrete Mercurial operation than the C nodetree when fully in RAM, and of course this implementation has the serious headstart advantage of persistence. Differential Revision: https://phab.mercurial-scm.org/D7797

rust-nodemap: input/output primitives These allow to initiate a `NodeTree` from an immutable opaque sequence of bytes, which could be passed over from Python (extracted from a `PyBuffer`) or directly mmapped from a file. Conversely, we can consume a `NodeTree`, extracting the bytes that express what has been added to the immutable part, together with the original immutable part. This gives callers the choice to start a new Nodetree. After writing to disk, some would prefer to reread for best guarantees (very cheap if mmapping), some others will find it more convenient to grow the memory that was considered immutable in the `NodeTree` and continue from there. This is enough to build examples running on real data and start gathering performance hints. Differential Revision: https://phab.mercurial-scm.org/D7796

pyoxidizer: allow extensions to be loaded from the file system It seems that setting this config is all that's needed to be able to load extensions from the file system (which we clearly want). Thanks for making this work, Gregory Szorc!. Differential Revision: https://phab.mercurial-scm.org/D8122

graft: always allow hg graft --base . (issue6248) `hg graft --base . -r abc` is rejected before this change with a "nothing to merge" error, if `abc` does not descend from `.`. This looks like an artifact of the implementation rather than intended behavior. It makes perfect sense to apply the diff between `.` and `abc` to the working copy (i.e. degenerate into `hg revert`), regardless of what `abc` is. Differential Revision: https://phab.mercurial-scm.org/D8127

revlog-compression: update the config to be a list format.revlog-compression is now a list of engine, the first supported one is to be used. Doing this have several benefits: 1) this is fully backward compatible, config using a single entry will be read as a single item list, not changing any behavior. 2) This open the way to use zstd by default without impacting platform were it is not available. This will be done in a later changesets. Using zstd provide a significant performance boost explained in : bb271ec2fbfb. However zstd is not available in some cases, A notable example is the `--pure` version of Mercurial which doesn't come with zstd support. Differential Revision: https://phab.mercurial-scm.org/D8148

remotefilelog: add 'changelog' arg to shallowcg1packer.generate (issue6269) This cause traceback on widening using narrow extension when remotefilelog is enabled. Differential Revision: https://phab.mercurial-scm.org/D8134

drawdag: abide by new createmarkers() API The `obsolete.createmarkers()` API was changed in 6335c0de80fa (obsolete: allow multiple predecessors in createmarkers, 2018-09-22) to prefer its precursors input to be a tuple instead of a single precursor. Let's fix `drawdag.py` to comply. Differential Revision: https://phab.mercurial-scm.org/D8149

lfutil: provide a hint if the largefiles/lfs cache path cannot be determined A coworker hit this error using an LFS repo in a stripped down environment, and didn't know how to resolve it. The final conditional is a bit fast and loose, but there is currently no 'posix' test in hghave, and it doesn't seem like it's worth adding for this since I think Windows is the only non-POSIX platform we run tests on. Differential Revision: https://phab.mercurial-scm.org/D8145

tests: replace truncate(1) with inline python MSYS doesn't have truncate(1) installed by default, and FreeBSD looked unhappy with the arguments provided. Differential Revision: https://phab.mercurial-scm.org/D8147

tests: stabilize test-rename-merge2.t on Windows I have no idea why, but this shifted in b4057d001760. Differential Revision: https://phab.mercurial-scm.org/D8146

merge with stable

bookmarks: prevent pushes of divergent bookmarks (foo@remote) Before this change, such bookmarks are write-only: a client can push them but not pull/read them. And because these bookmark can't be read, even pushes are limited (for instance trying to delete such a bookmark fails with a vanilla client because the client thinks the bookmark is neither on the local nor the remote). This change makes the server refuses such bookmarks, and for earlier errors, makes the client refuse to send them. I think the change of behavior is acceptable because I think this is a bug in push/pull, and I don't think we change the behavior of `hg unbundle`, because it doesn't seem that `hg bundle` ever store bookmarks (and even if it did, it would seem weird anyway to try to send divergent bookmarks). Differential Revision: https://phab.mercurial-scm.org/D8117

bookmarks: refactor in preparation for next commit Differential Revision: https://phab.mercurial-scm.org/D8116

bookmarks: avoid traceback when two pushes race to delete the same bookmark `hg push -f -B remote-only-bookmark` can raise server-side in `bookmarks._del` (specifically in `self._refmap.pop(mark)`), if the remote-only bookmark got deleted concurrently. Fix this by simply not deleting the non-existent bookmark in that case. For avoidance of doubt, refusing to delete a bookmark that doesn't exist when the push starts is taking care of elsewhere; no change of behavior there. Differential Revision: https://phab.mercurial-scm.org/D8124

relnotes: add entry about previous `hg recover` change Differential Revision: https://phab.mercurial-scm.org/D8123

darwin: add another preemptive gui() call when using chg Changeset a89381e04c58 added this gui() call before background forks, and Google's extensions do background forks on essentially every invocation for logging purposes. The crash is reliably (though not 100%) reproducible without this change when running `HGPLAIN=1 chg status` in one of our repos. With this fix, I haven't been able to trigger the crash anymore. Differential Revision: https://phab.mercurial-scm.org/D8141

copy: add experimental support for marking committed copies The simplest way I'm aware of to mark a file as copied/moved after committing is this: hg uncommit --keep <src> <dest> # <src> needed for move, but not copy hg mv --after <src> <dest> hg amend This patch teaches `hg copy` a `--at-rev` argument to simplify that into: hg copy --after --at-rev . <src> <dest> In addition to being simpler, it doesn't touch the working copy, so it can easily be used even if the destination file has been modified in the working copy. Differential Revision: https://phab.mercurial-scm.org/D8035

copy: move argument validation a little earlier Argument validation is usually done early and I will want it done before some code that I'm about to add. Differential Revision: https://phab.mercurial-scm.org/D8033

copy: add experimetal support for unmarking committed copies The simplest way I'm aware of to unmark a file as copied after committing is this: hg uncommit --keep <dest> hg forget <dest> hg add <dest> hg amend This patch teaches `hg copy --forget` a `-r` argument to simplify that into: hg copy --forget --at-rev . <dest> In addition to being simpler, it doesn't touch the working copy, so it can easily be used even if the destination file has been modified in the working copy. I'll teach `hg copy` without `--forget` to work with `--at-rev` next. Differential Revision: https://phab.mercurial-scm.org/D8030

copy: add option to unmark file as copied To unmark a file as copied, the user currently has to do this: hg forget <dest> hg add <dest> The new command simplifies that to: hg copy --forget <dest> That's not a very big improvement, but I'm planning to also teach `hg copy [--forget]` a `--at-rev` argument for marking/unmarking copies after commit (usually with `--at-rev .`). Differential Revision: https://phab.mercurial-scm.org/D8029

nodemap: introduce an option to use mmap to read the nodemap mapping The performance and memory benefit is much greater if we don't have to copy all the data in memory for each information. So we introduce an option (on by default) to read the data using mmap. This changeset is the last one definition the API for index support nodemap data. (they have to be able to use the mmaping). Below are some benchmark comparing the best we currently have in 5.3 with the final step of this series (using the persistent nodemap implementation in Rust). The benchmark run `hg perfindex` with various revset and the following variants: Before: * do not use the persistent nodemap * use the CPython implementation of the index for nodemap * use mmapping of the changelog index After: * use the MixedIndex Rust code, with the NodeTree object for nodemap access (still in review) * use the persistent nodemap data from disk * access the persistent nodemap data through mmap * use mmapping of the changelog index The persistent nodemap greatly speed up most operation on very large repositories. Some of the previously very fast lookup end up a bit slower because the persistent nodemap has to be setup. However the absolute slowdown is very small and won't matters in the big picture. Here are some numbers (in seconds) for the reference copy of mozilla-try: Revset Before After abs-change speedup -10000: 0.004622 0.005532 0.000910 × 0.83 -10: 0.000050 0.000132 0.000082 × 0.37 tip 0.000052 0.000085 0.000033 × 0.61 0 + (-10000:) 0.028222 0.005337 -0.022885 × 5.29 0 0.023521 0.000084 -0.023437 × 280.01 (-10000:) + 0 0.235539 0.005308 -0.230231 × 44.37 (-10:) + :9 0.232883 0.000180 -0.232703 ×1293.79 (-10000:) + (:99) 0.238735 0.005358 -0.233377 × 44.55 :99 + (-10000:) 0.317942 0.005593 -0.312349 × 56.84 :9 + (-10:) 0.313372 0.000179 -0.313193 ×1750.68 :9 0.316450 0.000143 -0.316307 ×2212.93 On smaller repositories, the cost of nodemap related operation is not as big, so the win is much more modest. Yet it helps shaving a handful of millisecond here and there. Here are some numbers (in seconds) for the reference copy of mercurial: Revset Before After abs-change speedup -10: 0.000065 0.000097 0.000032 × 0.67 tip 0.000063 0.000078 0.000015 × 0.80 0 0.000561 0.000079 -0.000482 × 7.10 -10000: 0.004609 0.003648 -0.000961 × 1.26 0 + (-10000:) 0.005023 0.003715 -0.001307 × 1.35 (-10:) + :9 0.002187 0.000108 -0.002079 ×20.25 (-10000:) + 0 0.006252 0.003716 -0.002536 × 1.68 (-10000:) + (:99) 0.006367 0.003707 -0.002660 × 1.71 :9 + (-10:) 0.003846 0.000110 -0.003736 ×34.96 :9 0.003854 0.000099 -0.003755 ×38.92 :99 + (-10000:) 0.007644 0.003778 -0.003866 × 2.02 Differential Revision: https://phab.mercurial-scm.org/D7894

rust-dirstatemap: directly return `non_normal` and `other_entries` This cleans up the interface which I previously thought needed to be uglier than in reality. No performance difference, simple refactoring. Differential Revision: https://phab.mercurial-scm.org/D8121

copy: rename `wctx` to `ctx` since it will not necessarily be working copy Differential Revision: https://phab.mercurial-scm.org/D8032

copy: rewrite walkpat() to depend less on dirstate I want to add a `hg cp/mv -r <rev>` option to mark files as copied/moved in an existing commit (amending that commit). The code needs to not depend on the dirstate for that. Differential Revision: https://phab.mercurial-scm.org/D8031

merge with stable

pathutil: resurrect comment about path auditing order It was removed at 51c86c6167c1, but expensive symlink traversal isn't the only reason we should walk path components from the root.

rust-dirstatemap: remove additional lookup in dirstate.matches We use the same trick as the Python implementation Differential Revision: https://phab.mercurial-scm.org/D7119

rust-nodemap: insert method In this implementation, we are in direct competition with the C version: this Rust version will have a clear startup advantage because it will read the data from disk, but the insertion happens all in memory for both. Differential Revision: https://phab.mercurial-scm.org/D7795

recover: don't verify by default The reason is: - it's not that hard to trigger interrupted transactions: just run out of disk space - it takes forever to verify on large repos. Before --no-verify, I told people to C-c hg recover when the progress bar showed up. Now I tell them to pass --no-verify. - I don't remember a single case where the verification step was useful This is technically a change of behavior. Perhaps this would be better suited for tweakdefaults? Differential Revision: https://phab.mercurial-scm.org/D7972