alias: show one-line hint for command provided by disabled extension It will be a hint of Abort exception. "hg help <alias>" provides the detailed version as before.

help: provide help of bad alias without executing aliascmd() The output is slightly changed because of minirst formatting. Previously, ui.pushbuffer() had no effect because "badalias" message was written to stderr. "if not unknowncmd" should no longer be needed because there's no call loop.

alias: provide "unknowncmd" flag to tell help to look for disabled command This patch prepares for breaking the call loop: help.help_() -> cmdalias() -> commands.help_() -> help.help_().

alias: keep error message in "badalias" so that help can see it Upcoming patches will - change help_() to get badalias message without executing cmdalias() - raise Abort on bad alias

alias: add test for alias command provided by disabled extension This should complete cases where "badalias" is set.

alias: expand "$@" as list of parameters quoted individually (BC) (issue4200) Before this patch, there was no way to pass in all the positional parameters as separate words down to another command. (1) $@ (without quotes) would expand to all the parameters separated by a space. This would work fine for arguments without spaces, but arguments with spaces in them would be split up by POSIX shells into separate words. (2) '$@' (in single quotes) would expand to all the parameters within a pair of single quotes. POSIX shells would then treat the entire list of arguments as one word. (3) "$@" (in double quotes) would expand similarly to (2). With this patch, we expand "$@" (in double quotes) as all positional parameters, quoted individually with util.shellquote, and separated by spaces. Under standard field-splitting conditions, POSIX shells will tokenize each argument into exactly one word. This is a backwards-incompatible change, but the old behavior was arguably a bug: Bourne-derived shells have expanded "$@" as a tokenized list of positional parameters for a very long time. I could find this behavior specified in IEEE Std 1003.1-2001, and this probably goes back to much further before that.

test-alias: add some tests to ensure we aren't double-substituting An earlier iteration of an upcoming patch caused inadvertent double substitution. Ensure we have test coverage for this.

revert: issue "no changes needed" message for files missing on both side When a file was marked as removed in the working copy and did not existed in the target of the revert, we did not issued any message pointing that no change was needed to the file (implicitly saying that revert had changed the file). We now properly issue a message in this situation. Tests change in and handful of case where the message was documented as missing.

revert: call status against revert target too We now call status against the target (and possibly against the working directory parent is different). We do not use the information from the two sources yet, but this is coming soon. We need the status information aganst the dirstate in all case because we need to be able to backup local modification.

revert: prefix variable names for dirstate status with "ds" As we are going to introduce status again other revision we needs to distinguish between data from dirstate status and the other one. We prefix the existing data with "ds" to highlight this.

revert: move manifest membership condition outside of the loop Currently, revset is using information from dirstate status and alter its behavior whenever the file exist in the target manifest or not. This tests are done a big for loop. We move this member ship testing outside of the loop and simplifies associates data structure. This is a step toward a cleaner implementation of revert based on status.

histedit: add "roll" command to fold commit data and drop message (issue4256) This new histedit command (short for "rollup") is a variant of "fold" akin to "hg amend" for working copy: it accumulates changes without interrupting the user and asking for an updated commit message.

repoview: cache hidden changesets Use the introduced caching infrastructure to cache hidden changesets. We crosscheck if the content of the cache unless experimental.verifyhiddencache is set to False. This will be removed in the future. Without crosschecking the caches speed ups hg status and other commands: without caching: $ time hg status hg status 0.72s user 0.20s system 100% cpu 0.917 total with caching $ time hg status hg status 0.49s user 0.15s system 100% cpu 0.645 total

repoview: add caching bits Add a caching infrastructure to cache hidden changesets. The cache tries to read the cache lazily and falls back to recomputing if no wlock can be obtain. To validate the cache we store a sha of the obstore content and repo heads in the beginning of the cache which we check every request.

repoview: split _gethiddenblockers Split up _gethiddenblockers into two categories: (1) "static' blockers that solely rely on the contents of obstore and are visible children of hidden changsets. (2) "dynamic" blockers, appearing by having wd parents, bookmarks or tags pointing to hidden changesets. We assume that (1) doesn't change often and can be easily cached with a good invalidation strategy. (2) change often, but barely produce blockers, so we can recompute them if necessary.

repoview: use set for blockers Blockers should be unique but tags and bookmarks could point to the same rev, therefore use a set to ensure that we don't have duplicates.

histedit: preserve initial author on fold (issue4296) When the authorship of the changeset folded in does not match that of the base changeset, we currently use the configured ui.username instead. This is especially surprising when the user is not the author of either of the changesets. In such cases, the resulting authorship (the user's) is clearly incorrect. Even when the user is folding in a patch they authored themselves, it's not clear whether they should take over the authorship. Let's instead keep it simple and always preserve the base changeset's authorship. This is also how "git rebase -i" handles folding/squashing.

run-tests: fix some io ordering backported from default

merge with stable

test-revert: add case where file is tracked but deleted in working directory

test-revert: add case with untracked files with unique content This test highlights similar misbehavior as its parent changesets.

test-revert: add case with untracked files with reverted content This test highlights similar misbehaviors as its parent changesets.

test-revert: add case where file exists but is untracked in working directory This test highlights a small misbehavior in output when reverting to another revision not including the untracked file.

test-revert: add case where the file is marked as removed in the wc Unlike untracked, the file is also missing from the working directory. This test highlights a small misbehavior in output when reverting to another revision.

test-revert: add case where wc content is different from "base" and "parent" This test highlights a case where backups are not created and the user may lose data.

test-revert: add case where wc content is already reverted to base content This test highlights multiple misbehaviors of revert. We augment the test comments accordingly.

test-revert: add case where file exists neither in "base" nor in "parent"

test-revert: add case where the file is removed between "base" and "parent"

test-revert: add case where file is unchanged between "base" and "parent" This test highlights a minor misbehavior in the message displayed during an explicit revert with a target revision.

test-run-tests: fix stdout/stderr io ordering

test-revert: add case where file is added between "base" and "parent"

merge with stable

test-revert: add methodical revert to "base" with explicit file path We now also test reverting file to another revision's content. However this differs from previously introduced test by using the explicit path of each "case file" when calling revert. This should result in the same result regarding file content and backup creation, but the output of the `hg revert` call should differ.

test-revert: add methodical revert with explicit file path We now also test reverting file to the working directory parent content. However this differs from the previously introduced test by using the explicit path of each "case file" when calling revert. This should result in the same result regarding file content and backup creation, but the output of the `hg revert` call should differ.

test-revert: add methodical revert to "base" We now also test reverting s file to the content of another revision. This is still done using the `--all` flag.

test-revert: add methodical revert to parent for working directory Now that we can automatically generate states, we need to actually run revert on them and check the result. While running such tests we are checking multiple elements. The output of the `hg revert` command, the resulting content of file, and the creation of backup file. The first practical test is using the simple case `hg revert --all`, reverting all files to working directory parent content.

test-revert: display the list of all generated cases This will help to track all existing cases. (still very simple now)

test-revert: also create a text version of the snapshot The text version is just a list of existing files with their content. We use a small custom script for that. This is going to be very useful for comparing revert results with revert target content.

hg-test-mode: make exit code highlight work again

test-revert: prepare methodical testing of revert cases We introduce a script to generate revert cases and use it to prepare a test repo. See the inline documentation for details.

test-revert: drop useless comments There are multiple comments explaining the expected output of commands. This is an old relic of the pre-unified test era. We remove them for uselessness.

run-tests: don't double lines on build failure output

test-run-tests: filter pwd alias for Windows

run-tests: self-test on Windows needs binary streams

merge with stable

help: normalize helplist hints

help: fold repeatable option message into option table header This will hopefully conserve some limited user attention.

help: roll option list header into option formatter