tests: move a config write to top of file since it applies to all tests I'm about to add another test that depends on this config. Differential Revision: https://phab.mercurial-scm.org/D6849

idirstate: group private methods and attrs that are in the interface This makes it a little more obvious at a glance what work is left. Fortunately there's not a whole lot left. I suspect the ignore logic is going to be the tricky bit. Differential Revision: https://phab.mercurial-scm.org/D6839

idirstate: remove now non-public _map attribute Differential Revision: https://phab.mercurial-scm.org/D6838

interfaces: introduce an interface for dirstate implementations As usual with adding interface definitions, this describes the way things are, not the way we'd like things to be. There are some clear problems in the interface right now (eg ._map leaks in a few places), but I have plans to clean those up. There are also many missing docstrings, but again, we'll make a second pass to clean that up. Differential Revision: https://phab.mercurial-scm.org/D6836

cleanup: fix leakage of dirstate._map to client code We already had proper accessors for most of the behavior of dirstate._map that callers cared about exposed in the actual dirstate class as public methods. Sigh. There are two remaining privacy violations in the codebase after this change: 1) In the perf extension, which I suspect has to stick around because it's really testing the dirstate implementation directly 2) In largefiles, where we deal with standins and mutating status. Looking at this, I _strongly_ suspect a formal dirstate interface would allow this to work via composition instead of inheritance and monkeypatching. Fortunately, such wins are a part of my motivation for this work. I anticipate we'll come back to this in due time. Differential Revision: https://phab.mercurial-scm.org/D6837

exchange: convert bookmark nodes from hex to bin ASAP Differential Revision: https://phab.mercurial-scm.org/D6831

exchange: avoid unnecessary conversion of bookmark nodes to hex (API) Differential Revision: https://phab.mercurial-scm.org/D6830

highlight: fix encoding issues to enable Py3 compatibility This commit fixes various encoding issues with the `highlight` extension to enable compatibility with Python 3. Python `.encode()` and `.decode()` requires the target encoding to be passed as a `str`, so the value of `mercurial.encoding.encoding` must be converted before passing to the function. Pygments also assumes the `str` type for values it works with, so we must perform conversions before and after receiving values from its APIs. After applying this patch, `test-highlight.t` passes under Python 3. We add it to `python3-whitelist` as well. Tested with Pygments 2.4.2. Differential Revision: https://phab.mercurial-scm.org/D6832

hgweb: add a `message` attribute to `hgweb.common.ErrorResponse` This fixes a Python 3 bug where hgweb assumes an Exception subclass will have a `.message` attribute after running `Exception.__init__`.[1] The Python 3 way to get this info would be `e.args[0]`, but adding a new named attribute is more ergonomic in my view. [1] https://www.mercurial-scm.org/repo/hg-committed/file/6ccf539aec71/mercurial/hgweb/hgwebdir_mod.py#l459 Differential Revision: https://phab.mercurial-scm.org/D6840

uncommit: make -D/--date and -U/--user mutually exclusive This is how amend and graft work (but not MQ). I'm not sure why this didn't work for me when I first tried it. Differential Revision: https://phab.mercurial-scm.org/D6842

uncommit: drop the hyphen from --current-user and --current-date I didn't pay enough attention to these long forms- graft, amend and MQ already use the old style naming. It's probably more important to be consistent than modern. The hypenated style came from evolve. Yuya mentioned this naming discrepancy in 4145fd3569c3, but it didn't attract any discussion[1]. There's also a bit of inconsistency in that the default parameter for `currentdate` is `False` for graft, and `None` for the rest. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2019-January/126767.html Differential Revision: https://phab.mercurial-scm.org/D6841

hgweb: fix websub regex flag syntax on Python 3 The `websub` config section for hgweb is broken under Python 3 when using regex flags syntax (ie the optional `i` in the example from `hg help config.websub`: patternname = s/SEARCH_REGEX/REPLACE_EXPRESSION/[i] Flags are pulled out of the specified byte-string using a regular expression, and uppercased. The flags are then iterated over and passed to the `re` module using `re.__dict__[item]`, to get the object attribute of the same name from the `re` module. So on Python 2 if the `il` flags are passed, this transition looks like: `'il'` -> `'IL'` -> `'I'` -> `re.__dict__['I']` -> `re.I` However on Python 3, these are bytes objects. When we iterate over a bytes object in Python 3, instead of getting the individual characters in the string as string objects of length one, we get the integer \ value corresponding to that byte. So the same transition looks like: `b'il'` -> `b'IL'` -> `73` -> `re.__dict__[73]` -> `KeyError` This commit fixes the type mismatch by converting the bytes to a system string before iterating over each element to pass to `re`. The transition will now look like: `b'il'` -> `u'IL'` -> `u'I'` -> `re.__dict__[u'I']` -> `re.I` In addition we expand `test-websub.t` to cover the regex flag case (for both the `websub` section and `interhg`). Differential Revision: https://phab.mercurial-scm.org/D6788

merge with stable

relnotes: we now require `sh` to support $(command) syntax to run test suite For example, Solaris before version 11 had /bin/sh pointing to the old Bourne Shell (which doesn't support $(command) syntax). Differential Revision: https://phab.mercurial-scm.org/D6833

doc: fix up confusing doc comment Differential Revision: https://phab.mercurial-scm.org/D6829

strip: fix bug with treemanifests and unordered linkrevs This is the treemanifest version of f45f7390c1c5 (strip: calculate list of extra nodes to save and pass it to changegroupsubset, 2008-01-19). Differential Revision: https://phab.mercurial-scm.org/D6795

repair: extract a helper for generating all manifest revlogs We'll need to walk the manifest revlogs also to figure out which manifests have linkrevs out of order (for fixing the bug shown in the previous patch). By the way, perhaps it would be more efficient in many cases to find only the relevant directory manifest revlogs based on the files instead of walking the entire store, but that can be changed later. Differential Revision: https://phab.mercurial-scm.org/D6794

tests: show broken strip with treemanifests and unordered linkrevs This is the treemanifest version of issue764. Differential Revision: https://phab.mercurial-scm.org/D6793

tests: split out manifest case from test-strip-cross.t The manifest case was added on after the other cases, in d67cfe0d4714 (test-strip-cross: test handling of linkrev crosses in the manifest, 2008-01-20). I think it's easier to read and modify if it's separated. Differential Revision: https://phab.mercurial-scm.org/D6792

tests: don't log manifest-file in test-strip-cross.t I'm confident that the file is there only to help produce a certain manifest log; there is nothing special about the file's filelog itself. (And there already is a `hg debugindex --manifest` call higher up in the file that shows the crossed linkrevs.) Differential Revision: https://phab.mercurial-scm.org/D6791

tests: use positive revision numbers in test-strip-cross.t It took me a long time to realize that '-r -1' was pulling revision -1 because I didn't even notice the minus sign until I tried changing the revision number. The order of arguments doesn't matter, so I changed from decreasing order to increasing while at it. Differential Revision: https://phab.mercurial-scm.org/D6790

automation: implement "publish-windows-artifacts" command The new command and associated functionality can be used to automate the publishing of Windows release artifacts. It supports uploading wheels to PyPI (using twine) and copying the artifacts to mercurial-scm.org and updating the latest.dat file to advertise them via the website. I ran `automation.py publish-windows-artifacts 5.1.1` and it appeared to "just work." But the real test will be to do this on the next release... Differential Revision: https://phab.mercurial-scm.org/D6786

automation: upgrade to latest packages in requirements.txt Let's stay modern. Differential Revision: https://phab.mercurial-scm.org/D6785

localrepo: push manifestlog and changelog construction code into store This feels substantially more appropriate, as the store is actually the layer with knowledge of how to handle this storage. I didn't move the caching decorators for now because that's going to require some more involved work, and this unblocks my current experimentation. Differential Revision: https://phab.mercurial-scm.org/D6732

notify: add option for deterministic message-id generation Copied from email by durin42: > Pierre-Yves asked offline why I asked a new option for this and why it > is not the default. Message-Id is supposed to be unique world-wide and > while it is desirable to have a deterministic mechanism for them for > creating follow-up emails, it needs organisational control for ensuring > the uniqueness. Differential Revision: https://phab.mercurial-scm.org/D6824

uncommit: add options to update to the current user or current date These are also from the evolve extension's version of uncommit. I tried adding validation that both forms of user or date can't be specified at the same time, but that fails because these show up in `opts` with a None value whether or not the option was given on the command line. Presumably that means the conditional in `resolvecommitoptions` could be simplified. But this is how both evolve and MQ handle it. Differential Revision: https://phab.mercurial-scm.org/D6828

uncommit: add support to modify the commit message and date Currently, the evolve extension's version of this command supports it. Differential Revision: https://phab.mercurial-scm.org/D6827

run-tests: add a dedicated 'isoptional' function This is clearer than repeated manual call to to 'endswith'. (This is a gratuitous cleanup that I made while investigating a bug).

run-tests: remove the artificial indentation

run-tests: extract a `process_out_line` from the main function The main function doing line comparison is quite complex. Slicing it in smaller piece should clarify it. To avoid a huge diff, the code is kept at the same indentation. We'll re-indent in the next changesets. (This is a gratuitous cleanup that I made while investigating a bug).