merge: structure 'remote created' code to match table This does duplicate the call to _checkunknownfile(), but it will simplify future patches.

pushkey: run hook after the lock release The pushkey operation used to be in its own wireprotocol command and (in practice) always be lock free when running the hook. With bundle2, it happen in a greater scheme and a hook running locking command would get stuck. We now run such hooks after the lock release as similar hook do. Bundle2 test are altered to ensure we are lockfree at hook running time.

setup: use changes since latest tag instead of just distance For a Mercurial built on the merge from stable into default right after 3.2.2 was released -- 19ebd2f88fc7 -- the version number produced was "3.2.2+4". This is potentially misleading, since in reality the built Mercurial includes many more changes compared to 3.2.2. Change the versioning scheme so that we take into consideration all the changes present in the current revision that aren't present in the latest tag. For 19ebd2f88fc7 the new versioning scheme results in a version number of "3.2.2+256". This gives users a much better idea of how many changes have actually happened since the latest release. Since changessincelatesttag is always greater than or equal to the latesttagdistance, this will produce version numbers that are always greater than or equal to the old scheme. Thus there's minimal compatibility risk.

setup: use changessincelatesttag from archive if present changessincelatesttag gives one a better idea of how much the code has changed since. Since changessincelatesttag is always greater than or equal to the latesttagdistance (see previous patch for why), this will always produce version numbers greater than or equal to the previous scheme.

archive: store number of changes since latest tag as well This is different from latesttagdistance in that while latesttagdistance is defined to be the length of the longest path to the latest tag, changessincelatesttag is the number of changes contained in @ that aren't contained in the latest tag. So, if 't' is the latest tag in the repository below: t | v --o--o----o \ \ ..o..o..@ then latesttagdistance is 2, but changessincelatesttag is 4. Note that changessincelatesttag is always greater than or equal to the latesttagdistance -- that's because changessincelatesttag counts all the changes in the longest path since the latest tag, and possibly others. This is an important fact that we'll take advantage of in upcoming patches.

merge with stable

demandimport: blacklist distutils.msvc9compiler (issue4475) This module depends on _winreg, which is windows-only. Recent versions of setuptools load distutils.msvc9compiler and expect it to ImportError immediately when on non-Windows platforms, so we need to let them do that. This breaks in an especially mystifying way, because setuptools uses vars() on the imported module. We then throw an exception, which vars doesn't pick up on well. For example: In [3]: class wat(object): ...: @property ...: def __dict__(self): ...: assert False ...: In [4]: vars(wat()) --------------------------------------------------------------------------- TypeError Traceback (most recent call last) <ipython-input-4-2781ada5ffe6> in <module>() ----> 1 vars(wat()) TypeError: vars() argument must have __dict__ attribute Which is similar to the problem we run into.

largefiles: don't duplicate 'actions' into 'actionbyfile'

merge: make calculateupdates() return file->action dict This simplifies largefiles' overridecalculateupdates(), which no longer has to do the conversion it started doing in 38e55e55ae4d (largefiles: rewrite merge code using dictionary with entry per file, 2014-12-09). To keep this patch small, we'll leave the name 'actionbyfile' in overrides.py. It will be renamed in the next patch.

merge: let _forgetremoved() work on the file->action dict By moving the conversion from the file->action dict after _forgetremoved(), we make that method shorter by removing the need for the confusing 'xactions' variable.

merge: let _resolvetrivial() work on the file->action dict By moving the conversion from the file->action dict after _resolvetrivial(), we greatly simplify and clarify that method.

merge: let bid merge work on the file->action dict By moving the conversion from the file->action dict after the bid merge code, bid merge can be simplified a little. A few tests are affected by this change. Where we used to iterate over the actions first in order of the action type ('g', 'r', etc.) [1], we now iterate in order of filename. This difference affects the order of debug log statements. [1] And then in the non-deterministic order of files in the manifest dictionary (the order returned from manifest.diff()).

merge: write manifestmerge() using dictionary with entry per file In the same vein as 38e55e55ae4d (largefiles: rewrite merge code using dictionary with entry per file, 2014-12-09), rewrite manifestmerge() itself as dictionary with the filename as key. This will let us simplify some of the other code in merge.py and eventually drop the conversion in the largefiles code. No difference in speed could be detected (well within the noise level when run in Mozilla repo).

repoview: backout ced3ecfc2e57 Monkey patching repoview does not really work and making it really work will be really hard. So we better have it broken without complexity than broken with extra complexity.

largefile: explain why no monkey patching on a repoview The comment requested for investigations, here they are.

largefile: backout ca54fb3d71ce The hack for method monkey patching on repoview has been ruled out as fragile, so we are rolling it back. We'll expand the explanation in the next changeset.

incoming: handle phases the same as pull Now that bundlerepo can move phases safely, 'hg incoming' can share its phase handling code with pull to better reflect what would actually show up.

bundlerepo: retract phase boundary This patch makes bundrepo retract the phase boundary for new commits to 'draft' status, which is consistent with the behavior of 'hg unbundle'. The old behavior was for commits to appear with the same phase as their nearest ancestor in the base repository. This affects several classes of operation: * Inspecting a bundle with the -B flag * Treating a bundle file as a peer (old: everything public, new: everything draft) * Incoming command (neither old or new behavior is sensible -- fixed in next patch)

bundlerepo: implement safe phasecache This patch makes bundlerepo use a subclass of phasecache that will allow phase boundaries to be moved around, but will never write them to the underlying repository.

localrepo.__getitem__: add slicing support This allows the python slice syntax to be used with revision numbers when indexing into a repository, such as repo[8:]

ignore: resolve ignore files relative to repo root (issue4473) (BC) Previously these would be considered to be relative to the current working directory. That behavior is both undocumented and doesn't really make sense. There are two reasonable options for how to resolve relative paths: - relative to the repo root - relative to the config file Resolving these files relative to the repo root matches existing behavior with hooks. An earlier discussion about this is available at http://mercurial.markmail.org/thread/tvu7yhzsiywgkjzl. Thanks to Isaac Jurado <diptongo@gmail.com> for the initial patchset that spurred the discussion.

test-hgignore: add testing for ui.ignore I couldn't find any tests for this, and we're going to make changes here in upcoming patches.

tests: add missing globs for Windows I couldn't figure out how to glob the first chunk for Windows, so it's been conditionalized.

share: use the 'sharedpath' attr on repo instead of reloading from the file Seems like a useful optimization, and now the exact file content is not a concern.

share: fix source repo lookup on Windows The stored path contains platform specific separators, so splitting on '/.hg' returned the string unmodified on Windows. The source was then looked for in $source/.hg/.hg, which obviously fails. This caused cascading errors in test-share.t relating to the recent bookmark support.

help: suggest '-v -e' to get built-in aliases for extensions (issue4461) If extension name matches one of command names, suggest user to type 'hg help -v -e <extension>' to get full list of built-in aliases

test-check-commit-hg: clarify misleading "commit message rules" error The test case doesn't only check the commit message, but also the patch, which can result in confusing output like + Revision df6f06d17100 does not comply to commit message rules + ------------------------------------------------------ + 32: adds double empty line + + even when there are no double blank lines in the commit message. Drop the "commit message" part to make it less confusing.

keyword: handle resolve to either parent Merged files are considered modified at commit time even if only 1 parent differs. In this case we must use the change context of this parent for expansion. The issue went unnoticed for long because it is only apparent until the next update to the merge revision - except in test-keyword where it was always staring us in the face.

keyword: update test file syntax

branches: deprecate -a

largefiles: fix a spurious missing file warning with forget (issue4053) If an uncommitted and deleted file was forgotten, a warning would be emitted, even though the operation was successful. See the previous patch for 'remove -A' for the exact circumstances, and details about the cause.

largefiles: fix a spurious missing file warning with 'remove -A' (issue4053) The bug report doesn't mention largefiles, but the given recipe doesn't fail unless the largefiles extension is loaded. The problem only affected normal files, whether or not any largefiles are committed, and only files that have not been committed yet. (Files with an 'a' state are dropped from dirstate, not marked removed.) Further, if the named normal file never existed, the warning would be printed out twice. The problem is that the core implementation of remove() calls repo.status(), which eventually triggers a dirstate.walk(). When the file isn't seen in the filesystem during the walk, the exception handling finds the file in dirstate, so it doesn't complain. However, the largefiles implementation called status() again with all of the original files (including the normal ones, just dropped). This time, the exception handler doesn't find the file in dirstate and does complain. This simply excludes the normal files from the second repo.status() call, which the largefiles extension has no interest is processing anyway.

largefiles: introduce the 'composelargefilematcher()' method This is a copy/paste (with the necessary tweaks) of the composenormalfilematcher method currently on default, which does the inverse- this trims the normal files out of the matcher. It will be used in the next patch.

context: return dirstate parents in workingctx.ancestors() workingctx.ancestors() was not returning the dirstate parents as part of the result set. The only place this function is used is for copy detection when committing a file, and that code already checks the parents manually, so this change has no affect at the moment. I found it while playing around with changing how copy detection works.

backout: add --commit option Mercurial backout command makes a commmit by default only when the backed out revision is the parent of working directory and doesn't commit in any other case. The --commit option changes behaviour of backout to make a commit whenever possible (i.e. there is no unresolved conflicts). This behaviour seems more intuitive to many use (especially git users migrating to hg).

share: add option to share bookmarks This patch adds the -B/--bookmarks option to the share command added by the share extension. All it does for now is create a marker, 'bookmarks.shared', that will be used by future code to implement the sharing functionality.

highlight: ignore Unicode's extra linebreaks (issue4291) Unicode and Python's unicode.splitlines() treat several extra legacy ASCII codepoints as linebreaks, even though the vast bulk of computing and Python's own str.splitlines() do not. Rather than introduce line numbering confusion, we filter them out when highlighting.

test: fix typo in test-help.t

templatekw: remove unneeded showtags Now that we have the machinery of namespaces in-place, we use that instead of hand-rolling our own template function. Note, this can only be used for tags because both branches and bookmarks have special case logic for 'default' and the current bookmark (which is something outside the namespace api for now).

namespaces: generate template keyword when registering a namespace For any namespace, we generate a template keyword. For example, given a namespace 'babar', we automatically have the ability to use it in a template: hg log -r . -T '{babars % "King: {babar}\n"}' Furthermore, we only generate this keyword for a namespace if one doesn't already exist. This is necessary for 'branches' and 'bookmarks' since both of those have concepts of 'current' (something outside the namespace api) and also allows extensions to override default behavior if desired.

templatekw: add helper method to generate a template keyword for a namespace This marks our second feature of the namespace api: automatic template keyword. This patch adds a method that takes in a namespace and uses the node-to-name map to output the list of names.

namespaces: add names method to return list of names for a given node In the previous patch, we added a node-to-name map property. This patch just exposes that interface to the api.

namespaces: add nodemap property This patch adds a node-to-name map property to the namespace. This is necessary because we cannot simply invert the name-to-node map because we do not assume the name-to-node map to be unique (for example, consider named branches: many nodes have one branch name). The node-to-name is helpful in log commands where we are already iterating over a set of nodes and want to display some kind of naming information to the user.

namespaces: add method to get template name of namespace This patch adds the public api for getting the template name of a namespace so that the next patch can use it to generate a template keyword automatically.

namespaces: add template name of a namespace The template name property will be used in upcoming patches to automatically generate a template keyword. For example, given a namespace called 'babars', we will automatically generate a template keyword 'babar' such that we can use it in the following way, $ hg log -r . -T '{babars % "King: {babar}\n"}'

memctx: remove redundant test for issue4470 from test-commit.t Because: - the test to avoid regression for issue4470 was already added to test-commit-amend.t by previous patch It is also a part of test series about manifest calculation issues of memctx in test-commit-amend.t. - this is the only test using "commit --amend" in test-commit.t

memctx: calculate manifest more efficiently Before this patch, "memctx._manifest" updates all entries in the (parent) manifest. But this is inefficiency, because almost all files may be clean in that context. On the other hand, just updating entries for changed "files" specified at construction causes unexpected abortion, when there is at least one newly removed file (see issue4470 for detail). To calculate manifest more efficiently, this patch replaces "pman.iteritems()" for the loop by "self._status.modified" to avoid updating entries for clean or removed files Examination of removal is also omitted, because removed files aren't treated in this loop (= "self[f]" returns not None always).

merge with stable

Added signature for changeset 6dad422ecc5a

Added tag 3.2.3 for changeset 6dad422ecc5a

pathauditor: check for Windows shortname aliases

pathauditor: check for codepoints ignored on OS X

darwin: omit ignorable codepoints when normcase()ing a file path This lets us avoid some nasty case collision problems in OS X with invisible codepoints.

encoding: add hfsignoreclean to clean out HFS-ignored characters According to Apple Technote 1150 (unavailable from Apple as far as I can tell, but archived in several places online), HFS+ ignores sixteen specific unicode runes when doing path normalization. We need to handle those cases, so this function lets us efficiently strip the offending characters from a UTF-8 encoded string (which is the only way it seems to matter on OS X.)

test-casefolding.t: demonstrate a bug with HFS+ ignoring some codepoints

manifest: disallow setting the node id of an entry to None manifest.diff() uses None as a special value to denote the absence of a file, so setting a file node to None means you then can't trust manifest.diff(). This should also make future manifest work slightly easier.