update: fix bare --clean to work on new branch (issue5003) (BC) Before this commit bare update --clean on newly created branch updates to the parent commit, even if there are later commits on the parent commit's branch. Update to the latest head on the parent commit's branch instead. This seems reasonable as clean should discard uncommited changes, branch is one of them.

revert: use "discard"/"revert" verb when reverting interactively (issue5143) Instead of "record this change to 'FILE'?" now prompt with: * "discard this change to 'FILE'?" when reverting to the parent of working directory, and, * "revert this change to 'FILE'?" otherwise.

run-tests: add support for RTUNICODEPEDANTRY environment variable based on 73e4a02e6d23

obsolete: fix grammar

tests: add run-test .testtimes basic testing

check-code: make repquote distinguish more characters for exact detection This patch makes repquote() distinguish more characters below, as a preparation for exact detection in subsequent patch. - "%" as "%" - "\\" as "b"(ackslash) - "*" as "A"(sterisk) - "+" as "P"(lus) - "-" as "M"(inus) Characters other than "%" don't use itself as replacement, because they are treated as special ones in regexp.

check-code: centralize rules depending on implementation of repquote This decreases the cost of checking which regexp should be adjusted at change of repquote().

check-code: use fixedmap for replacement of space characters This can centralize management of fixed replacement into fixedmap.

check-code: replace quoted characters correctly 169cb9e47f8e tried to detect '.. note::' more exactly. But implementation of it seems not correct, because: - fromc.find(c) returns -1 for other than "." and ":" - tochr[-1] returns "q" for such characters, but - expected result for them is "o" This patch uses dict to manage replacement instead of replacing str.find() by str.index(), for improvement/refactoring in subsequent patches. Examination by fixedmap is placed just after examination for ' ' and '\n', because subsequent patch will integrate the latter into the former. This patch also changes regexp for 'string join across lines with no space' rule, and adds detailed test for it, because 169cb9e47f8e did: - make repquote() distinguish "." (as "p") and ":" (as "q") from others (as "o"), but - not change this regexp without any reason (in commit log, at least), even though this regexp depends on what "o" means This patch doesn't focuses on deciding whether "." and/or ":" should be followed by whitespace or not in translatable messages.

test-chg: add basic tests for server lifecycle I'm going to move around the codes in AutoExitMixIn. This test should catch a subtle bug of unlinking sockets which I made in draft patches.

test-chg: run only with chg It doesn't make sense to run test-chg.t without chg, so ignore it with vanilla hg, and specify chg executable explicitly. test-chg.t can host chg-specific tests.

distate: add assertions to backup functions Those assertions will prevent the backup functions from overwriting the dirstate file in case both: suffix and prefix are empty. (foozy suggested making that change and I agree with him)

Added signature for changeset a9764ab80e11

Added tag 3.8.3 for changeset a9764ab80e11

shelve: use backup functions instead of manually copying dirstate This increases encapsulation of dirstate: the dirstate file is private to the dirstate module and shouldn't be touched by extensions directly.

dirstate: don't use actualfilename to name the backup file The issue with using actualfilename is that dirstate saved during transaction with "pending" in filename will be impossible to recover from outside of the transaction because the recover method will be looking for the name without "pending".

sslutil: reference appropriate config section in messaging Error messages reference the config section defining the host fingerprint. Now that we have multiple sections where this config setting could live, we need to point the user at the appropriate one. We default to the new "hostsecurity" section. But we will still refer them to the "hostfingerprint" section if a value is defined there. There are some corner cases where the messaging might be off. e.g. they could define a SHA-1 fingerprint in both sections. IMO the messaging needs a massive overhaul. I plan to do this as part of future refactoring to security settings.

sslutil: allow fingerprints to be specified in [hostsecurity] We introduce the [hostsecurity] config section. It holds per-host security settings. Currently, the section only contains a "fingerprints" option, which behaves like [hostfingerprints] but supports specifying the hashing algorithm. There is still some follow-up work, such as changing some error messages.

debuginstall: expose modulepolicy With this, you can check for pure easily: $ HGMODULEPOLICY=py ./hg debuginstall -T "{hgmodulepolicy}" py

revset: define table of sort() key functions This should be more readable than big "if" branch.

revset: factor out reverse flag of sort() key Prepares for making a table of sort keys. This assumes 'k' has at least one character, which should be guaranteed by keys.split().

tests: don't save host fingerprints in hgrc Previously, the test saved the host fingerprints in hgrc. Many tests override the fingerprint at run-time. This was a bit dangerous and was too magical for my liking. It will also interfere with a future patch that adds a new source for obtaining fingerprints. So change the test to require the fingerprint on every command invocation.

sslutil: calculate host fingerprints from additional algorithms Currently, we only support defining host fingerprints with SHA-1. A future patch will introduce support for defining fingerprints using other hashing algorithms. In preparation for that, we rewrite the fingerprint verification code to support multiple fingerprints, namely SHA-256 and SHA-512 fingerprints. We still only display the SHA-1 fingerprint. We'll have to revisit this code once we support defining fingerprints with other hash functions. As part of this, I snuck in a change to use range() instead of xrange() because xrange() isn't necessary for such small values.

util: add sha256 Upcoming patches will teach host fingerprint checking to verify non-SHA1 fingerprints. Many x509 certificates these days are SHA-256. And modern browsers often display the SHA-256 fingerprint for certificates. Since SHA-256 fingerprints are highly visible and easy to obtain, we want to support them for fingerprint pinning. So add SHA-256 support to util. I did not add SHA-256 to DIGESTS and DIGESTS_BY_STRENGTH because this will advertise the algorithm on the wire protocol. I wasn't sure if that would be appropriate. I'm playing it safe by leaving it out for now.

sslutil: move CA file processing into _hostsettings() The CA file processing code has been moved from _determinecertoptions into _hostsettings(). As part of the move, the logic has been changed slightly and the "cacerts" variable has been renamed to "cafile" to match the argument used by SSLContext.load_verify_locations(). Since _determinecertoptions() no longer contains any meaningful code, it has been removed.

sslutil: move SSLContext.verify_mode value into _hostsettings _determinecertoptions() and _hostsettings() are redundant with each other. _hostsettings() is used the flexible API we want. We start the process of removing _determinecertoptions() by moving some of the logic for the verify_mode value into _hostsettings(). As part of this, _determinecertoptions() now takes a settings dict as its argument. This is technically API incompatible. But since _determinecertoptions() came into existence a few days ago as part of this release, I'm not flagging it as such.

sslutil: introduce a function for determining host-specific settings This patch marks the beginning of a series that introduces a new, more configurable, per-host security settings mechanism. Currently, we have global settings (like web.cacerts and the --insecure argument). We also have per-host settings via [hostfingerprints]. Global security settings are good for defaults, but they don't provide the amount of control often wanted. For example, an organization may want to require a particular CA is used for a particular hostname. [hostfingerprints] is nice. But it currently assumes SHA-1. Furthermore, there is no obvious place to put additional per-host settings. Subsequent patches will be introducing new mechanisms for defining security settings, some on a per-host basis. This commits starts the transition to that world by introducing the _hostsettings function. It takes a ui and hostname and returns a dict of security settings. Currently, it limits itself to returning host fingerprint info. We foreshadow the future support of non-SHA1 hashing algorithms for verifying the host fingerprint by making the "certfingerprints" key a list of tuples instead of a list of hashes. We add this dict to the hgstate property on the socket and use it during socket validation for checking fingerprints. There should be no change in behavior.

tests-subrepo-git: emit a different "pwned" message based on the test Having a single "pwned" message which may or may not be emitted during the tests for CVE-2016-3068 leads to extra confusion. Allow each test to emit a more detailed message based on what the expectations are. In both cases, we expect a version of git which has had the vulnerability plugged, as well as a version of mercurial which also knows about GIT_ALLOW_PROTOCOL. For the first test, we make sure GIT_ALLOW_PROTOCOL is unset, meaning that the ext-protocol subrepo should be ignored; if it isn't, there's either a problem with mercurial or the installed copy of git. For the second test, we explicitly allow ext-protocol subrepos, which means that the subrepo will be accessed and a message emitted confirming that this was, in fact, our intention.

tests-subrepo-git: make the "pwned" message output in a stable order The "pwned" message from this test gets gets sent to stderr, and so may get emitted in different places from run to run in the rest of mercurial's output. This patch forces the message to go to a specific file instead, whose existence and contents we can examine at a stable point in the test's execution.

test-cache-abuse: correct for different hunk headers between Solaris and GNU When diffing against an empty file, Solaris diff uses 1 to designate the first line of the empty file (either -1,0 on the left or +1,0 on the right) while GNU diff uses 0 (-0,0 and +0,0). We use a glob here to make sure the test passes with either toolchain. I've not added tests to check-code because there are scads of places in the tests where the GNU format is used due to that being the format that "hg diff" and "hg export" use, and changing those to use globs seems wrong.