py3: use pycompat.getcwd() instead of os.getcwd() We have pycompat.getcwd() which returns bytes path on Python 3. This patch changes most of the occurences of the os.getcwd() with pycompat one.

debugcommands: move 'debugextensions' to the new module

debugcommands: move 'debugdiscovery' in the module And a lot of imports with it.

debugcommands: move 'debugdate' in the new module

debugcommands: move 'debugrevlogopts' into the new module This move contains the first reference to debugrevlogopts in debugcommands.py. We'll eventually want to move that over. We hold off for now because it would introduce a module import cycle.

debugcommands: move 'debugdag' into the new module

chgserver: make it a core module and drop extension flags It was an extension just because there were several dependency cycles I needed to address. I don't add 'chgserver' to extensions._builtin since chgserver is considered an internal extension so nobody should enable it by their config.

chgserver: delay importing commands and dispatch modules This is a workaround for future import cycle: dispatch -> commands -> server -> chgserver -> commands. Some of the problems can be fixed later on pager and chg refactoring.

chgserver: drop CHGINTERNALMARK by chgunixservice() Prepares for the removal of uisetup(). We just need to do that at the start of the chg server, so chgunixservice() should be fine.

server: add public function to select either cmdserver or hgweb

server: move service factory from hgweb

hgweb: extract app factory I'll move createservice() to the server module, but createapp() seems good to remain in the hgweb module because of its dependency on hgweb/hgwebdir_mod.

server: move service table and factory from commandserver This is necessary to solve future dependency cycle between commandserver.py and chgserver.py. 'cmd' prefix is added to table and function names to avoid conflicts with hgweb.

server: move cmdutil.service() to new module (API) And call it runservice() because I'll soon add createservice(). The main reason I'm going to introduce the 'server' module is to solve future dependency cycle between chgserver.py and commandserver.py. The 'server' module sits at the same layer as the cmdutil. I believe it's generally good to get rid of things from the big cmdutil module.

debugcommands: move 'debugcomplete' in the new module

debugcommands: move 'debugcommands' in the new module The commit message isn't an illusion. There is a "debugcommands" module and command.

debugcommands: move 'debugcheckstate' in the new module

debugcommands: move debug{create,apply}streambundleclone to the new module

debugcommands: move 'debugbundle' in the new module

py3: add os.getcwdb() to have bytes path Following the behaviour of Python 3, os.getcwd() return unicodes. We need bytes version as path variables are bytes in UNIX. Python 3 has os.getcwdb() which returns current working directory in bytes. Like rest of the things there in pycompat, like osname, ossep, we need to rewrite every instance of os.getcwd to pycompat.getcwd to make them work correctly on Python 3.

help: clarify contents of revlog index The previous wording indicated that field at index 3 was the size of the decompressed chunk, not the size of the full revision text.

zstd: fix compilation with Solaris Studio Without these changes, Solaris Studio (12.4) gives us "syntax error: empty declaration" on these two lines.

cmdutil: turn forward of checkunresolved into a deprecation warning As with dirstateguard, I really doubt anyone outside core was using this, as my grep over the repositories I keep locally suggests nobody was using this. If others are comfortable with it, let's drop the forward entirely.

localrepo: refer to checkunresolved by its new name

rebase: refer to checkunresolved by its new name

checkunresolved: move to new package to help avoid import cycles This will allow localrepo to stop using cmdutil, which should avoid some future import cycles. There's room for an adventurous soul to delve deeper into merge.py and figure out how to disentangle more of it - it appears to be a nexus of cycle problems. Some of it might be able to move into this new mergeutil package.

cmdutil: mark dirstateguard as deprecated I sincerely doubt this is used in external code, as grepping the extensions I keep locally (including Facebook's hgexperimental and evolve) indicate nobody outside of core uses this. As such, I'd also welcome just dropping this name forward entirely.

localrepo: refer to dirstateguard by its new name

commands: refer to dirstateguard by its new name

rebase: refer to dirstateguard by its new name

mq: refer to dirstateguard by its new name

dirstateguard: move to new module so I can break some layering violations Recently in a review I noticed that localrepo almost has no reason to import cmdutil anymore. Also, cmdutil is a little on the enormous side, so breaking this class out strikes me as a win.

keepalive: discard legacy Python support for error handling We never changed the behavior defined by this attribute anyway, so just jettison all of this support.

mergemod: drop support for merge.update without a target This was to be deleted after 3.9.

dispatch: stop supporting non-use of @command We said we'd delete this after 3.8. It's time.

httppeer: document why super() isn't used Adding a follow-up to document lack of super() per Augie's request.

exchange: add `_getbookmarks()` function This function will be used to generate bookmarks bundle2 part. It is a separate function in order to make it easy to overwrite it in extensions. Passing `kwargs` to the function makes it easy to add new parameters in extensions.

bookmarks: use listbinbookmarks() in listbookmarks()

bookmarks: introduce listbinbookmarks() `bookmarks` bundle2 part will work with binary nodes. To avoid unnecessary conversions between binary and hex nodes let's add `listbinbookmarks()` that returns binary nodes. For now this function is a copy-paste of listbookmarks(). In the next patch this copy-paste will be removed.

ui: add configoverride context manager I feel like this idea might've been discussed before, so please feel free to point me to the right mailing list entry to read about why it should not be done. We have a common pattern of the following code: backup = ui.backupconfig(section, name) try: ui.setconfig(section, name, temporaryvalue, source) do_something() finally: ui.restoreconfig(backup) IMO, this looks better: with ui.configoverride({(section, name): temporaryvalue}, source): do_something() Especially this becomes more convenient when one has to backup multiple config values before doing something. In such case, adding a new value to backup requires codemod in three places.

archival: simplify code and drop message about Python 2.5

bugzilla: stop mentioning Pythons older than 2.6 We don't support those anyway.

tests: update sitecustomize to use uuid1() instead of randrange() The comments mention that uuid would be better, so let's go ahead and make good on an old idea.

win32mbcs: drop code that was catering to Python 2.3 and earlier

httppeer: drop an except block that says it happens only on Python 2.3

windows: do not replace sys.stdout by winstdout Now we use util.stdout everywhere.

py3: bulk replace sys.stdin/out/err by util's Almost all sys.stdin/out/err in hgext/ and mercurial/ are replaced by util's. There are a few exceptions: - lsprof.py and statprof.py are untouched since they are a kind of vendor code and they never import mercurial modules right now. - ui._readline() needs to replace sys.stdin and stdout to pass them to raw_input(). We'll need another workaround here.

py3: provide bytes stdin/out/err through util module Since standard streams are TextIO on Python 3, we can't use sys.stdin/out/err directly. Fortunately we can get the underlying BytesIO via .buffer as long as the streams aren't replaced by e.g. StringIO. stdin/out/err are provided through util so we can wrap them by platform API.

util: rewrite pycompat imports to make pyflakes always happy I'll add more imports which would confuse pyflakes.

windows: do not replace sys.__stdout__ Now we don't use sys.__stdout__ except for getting its fileno(), so we no longer have to wrap it by winstdout. This helps adding pycompat.stdin/out/err.

py3: update test-check-py3-compat.t output This part remains unchanged because it runs in Python 3 only.

py3: use pycompat.sysargv in dispatch.run() Another one to have a bytes result from sys.argv in Python 3. This one is also a part of running `hg version` on Python 3.

py3: use pycompat.sysargv in scmposix.systemrcpath() sys.argv returns unicodes on Python 3. We have pycompat.sysargv which returns bytes encoded using os.fsencode(). After this patch scmposix.systemrcpath() returns bytes in Python 3 world. This change is also a part of making `hg version` run in Python 3.

wireproto: perform chunking and compression at protocol layer (API) Currently, the "streamres" response type is populated with a generator of chunks with compression possibly already applied. This puts the onus on commands to perform chunking and compression. Architecturally, I think this is the wrong place to perform this work. I think commands should say "here is the data" and the protocol layer should take care of encoding the final bytes to put on the wire. Additionally, upcoming commits will improve wire protocol support for compression. Having a central place for performing compression in the protocol transport layer will be easier than having to deal with compression at the commands layer. This commit refactors the "streamres" response type to accept either a generator or an object with "read." Additionally, the type now accepts a flag indicating whether the response is a "version 1 compressible" response. This basically identifies all commands currently performing compression. I could have used a special type for this, but a flag works just as well. The argument name foreshadows the introduction of wire protocol changes, hence the "v1." The code for chunking and compressing has been moved to the output generation function for each protocol transport. Some code has been inlined, resulting in the deletion of now unused methods.

httppeer: use compression engine API for decompressing responses In preparation for supporting multiple compression formats on the wire protocol, we need all users of the wire protocol to use compression engine APIs. This commit ports the HTTP wire protocol client to use the compression engine API. The code for handling the HTTPException is a bit hacky. Essentially, HTTPException could be thrown by any read() from the socket. However, as part of porting the API, we no longer have a generator wrapping the socket and we don't have a single place where we can trap the exception. We solve this by introducing a proxy class that intercepts read() and converts the exception appropriately. In the future, we could introduce a new compression engine API that supports emitting a generator of decompressed chunks. This would eliminate the need for the proxy class. As I said when I introduced the decompressorreader() API, I'm not fond of it and would support transitioning to something better. This can be done as a follow-up, preferably once all the code is using the compression engine API and we have a better idea of the API needs of all the consumers.

httppeer: do decompression inside _callstream The current HTTP transport protocol only compresses certain command responses and requires calls to that command to call "_callcompressable," which zlib decompresses the response transparently. Upcoming changes will enable *any* response to be compressed with varying compression formats. In order to handle this better, this commit moves the decompression bits to the main function performing the HTTP request. We introduce an underscore-prefixed argument to denote this behavior so it doesn't conflict with a named argument to a command.

keepalive: reorder header precedence There are 3 sources of headers used by this function: * The default headers defined by the URL opener * Headers that are copied on redirects * Headers that aren't copied on redirects Previously, we applied the default headers from the URL opener last. This feels wrong to me as those headers are the most low level and something built on top of the URL opener may wish to override them. So, this commit changes the order to apply them with the least precedence. While I was here, I removed a Python version test that is no longer necessary.

debuginstall: print compression engine support Since compression engines may be provided by extensions and since not all registered compression engines may be available to use, it seems useful to provide a mechanism to see the state of known compression engines. This commit teaches `hg debuginstall` to print info on known and available compression engines.

bdiff: don't check border condition in loop This is pretty much a copy of d500ddae7494, just to a different loop. The condition `p == plast` (`plast == a + len - 1`) was only true on the final iteration of the loop. So it was wasteful to check for it on every iteration. We decrease the iteration count by 1 and add an explicit check for `p == plast` after the loop. Again, we see modest wins. From the mozilla-unified repository: $ perfbdiff -m 3041e4d59df2 ! wall 0.035502 comb 0.040000 user 0.040000 sys 0.000000 (best of 100) ! wall 0.030480 comb 0.030000 user 0.030000 sys 0.000000 (best of 100) $ perfbdiff 0e9928989e9c --alldata --count 100 ! wall 4.097394 comb 4.100000 user 4.100000 sys 0.000000 (best of 3) ! wall 3.597798 comb 3.600000 user 3.600000 sys 0.000000 (best of 3) The 2nd example throws a total of ~3.3GB of data at bdiff. This change increases the throughput from ~811 MB/s to ~924 MB/s.

conflicts: make spacing consistent in conflict markers The way default marker template was defined before this patch, the spacing before dash in conflict markes was dependent on whether changeset is a tip one or not. This is a relevant part of template: '{ifeq(tags, "tip", "", "{tags} "}' If revision is a tip revision with no other tags, this would resolve to an empty string, but for revisions which are not tip and don't have any other tags, this would resolve to a single space string. In the end this causes weirdnesses like the ones you can see in the affected tests. This is a not a big deal, but double spacing may be visually less pleasant. Please note that test changes where commit hashes change are the result of marking files as resolved without removing markers.

rebase: move bookmark update to before rebase clearing Bookmark fixing should probably happen before the rebase starts to clean up, so let's move it before clearrebased. This will also help a future patch where we want to add more clear logic to the existing clear section.

setup: include a dummy $PATH in the custom environment used by build.py This is required for building with pypiwin32, the pip-installable replacement for pywin32.

shelve: move unshelve-finishing logic to a separate function Finishing unshelve involves two steps now: - stripping a changelog - aborting a transaction Obs-based shelve will not require these things, so isolating this logic into a separate function where the normal/obs-shelve branching is going to be implemented seems to be like a nice idea. Behavior-wise this change moves 'unshelvecleanup' from being between changelog stripping and transaction abortion to being after them. I don't think this has any negative effects.

shelve: move file-forgetting logic to a separate function This is just a readability improvement.