runtests: export HGIPV6 to hint test scripts whether to use IPv6 Previously, run-tests.py only exports HGPORT, and scripts in tests do not know if IPv6 should be used. And that breaks scripts like dumbhttp.py which always uses IPv4. This patch makes run-tests.py export HGIPV6, which can help test scripts like dumbhttp.py and tinyproxy.py to decide whether to use IPv6 or not.

runtests: prefer IPv4 to IPv6 To make IPv6 work, there are multiple areas that need to fix. Before they all get fixed, use IPv4 by default. This should fix tests caused on IPv6 systems.

doc: correct example concerning "hg purge" alias in man page "hgrc.5" The "hg purge" alias as currently described in "hgrc.5" issues a possibly confusing error message like rm: missing operand Try 'rm --help' for more information. if no files are to be purged at all. This patch slightly modifies the example by adding a "-f" option to the "rm" command.

tests: prove that ignore works

annotate: migrate to modern pager API

ui: add a debug print right before we start the pager This makes it easier to figure out why a command is getting paginated.

ui: respect historic pager.attend-$COMMAND=no I'm on the fence about this behavior, but the user's intent was pretty specific and it's not expensive to support this case.

tests: clean up a bunch of pager testing that is about to be invalidated All this attend logic and potential bugs just no longer make sense to test.

ui: add ignore-single-command functionality This closes the last feature gap other than the attend list from the extension. For now, I'm leaving the attend list in the extension, because I'm unsure it has merit in a world where commands have been updated to take advantage of the modern API.

ui: introduce neverpager() call I'm about to add direct paging support to some commands, and as a result we need a way to communicate from the higher layers of dispatch that paging is explicitly disabled.

pager: move more behavior into core This moves the global flag and the --pager=yes logic into core. Only functionality change is that users now always get a --pager flag and can enable the pager via the flag without the extension active. Moving the flag into core exposes a defect in the ro localization, which will have to be corrected later.

pager: move pager-initiating code into core No functionality change. A previous version of this API had a category argument on ui.pager(). As I migrated the commands in core, I couldn't come up with good enough consistency in any categorization scheme so I just scrapped the whole idea. It may be worth revisiting in the future.

test-logtoprocess: use cat to wait for outputs Commands started by logtoprocess are running asynchronously. To be able to test the output, we need to block and wait for the output. The patch uses "| cat" to wait for such "asynchronous" outputs, to make the test more reliable. I have also written a short notice at the top, hopefully people would be aware of the pitfall when changing the test.

chgserver: move comments in config example "#" must be the first character of a line to mark the text as comments. So let's change the docstring.

localrepo: move extension loading to a separate method The stateful chg plan [1] requires a special repo object, where ideally all side effects caused by loading the repo object could be reverted by just dropping (gabbage collect) the loaded repo object. Currently, that is impossible because repo.__init__ calls "extensions.loadall", which may have unpredictable side-effects that cannot be reverted by dropping the repo object. This patch moves "extensions.loadall" to a separate method, so chg could subclass localrepository and make extensions loading a no-op. [1]: mercurial-scm.org/pipermail/mercurial-devel/2017-February/092547.html

py3: convert the mode argument of os.fdopen to unicodes Couple of these from the earlier series got lost while rebasing. So this patch converts them again.

runtests: unindent an "if True" block The block was left to make review easier. This patch unindents it.

runtests: set web.ipv6 if we use IPv6 As explained by the previous patch, we need to set "web.ipv6=True" if we decide to use IPv6. Otherwise "hg serve" will still try to listen on IPv4. This patch makes it so by appending web.ipv6 to "extra configs". This patch was tested in a Linux system with IPv6, by the following steps: 1. Change hgweb/server.py temporarily to write a file if IPv6HTTPServer.__init__ is called. 2. run-tests.py -l --keep-tmpdir test-serve.t 3. Check the generated .hgrc, make sure it sets web.ipv6=1. 4. Check the log file to make sure IPv6HTTPServer.__init__ is called.

runtests: checkportisavailable should only check one family As explained by the previous patch, checkportisavailable() should only check the preferred family - either IPv4 or IPv6, not both. This patch makes it so.

runtests: add a function to test if IPv6 is available Previously, checkportisavailable returns True if the port is free either on IPv4 or IPv6, but the hg server only uses IPv4 by default. That leads to issues when IPv4 port is not free but the IPv6 one is. To address that, run-tests should stick with either IPv4 or IPv6. This patch adds a function similar to checkportisavailable to test if IPv6 is available, and assigns the result to a variable. The new function was tested in a Linux system script with the following steps: 1. Run "ip addr del ::1/128 dev lo" to delete lo's IPv6 address, Confirm checkipv6available() returns False. 2. Run "ip addr add ::1/128 dev lo" to add back lo's IPv6 address. Confirm checkipv6available() returns True. 3. Start a web server taking the 8000 port. Confirm checkipv6available(8000) is still True.

histedit: log the time taken to read in the commands list If we're being fed an external command list from stdin (histedit --commands -), then the time spent reading stdin is outside our control. Log it.

extdiff: log time spent in external diff program We can't fix the time external diff programs take to run. Log that duration for us to remove from any stats we gather

crecord: log blocked time waiting for curses input We want to know when we're blocked waiting for the user - log the time spent waiting in the curses keyboard handlers

ui: give editor() a tag of its own We know that calls to ui.editor() always block on the user's configured editor. Use a blocking tag that ensures that we don't see a huge variety of editor options in our logging.

ui: time calls to ui.system We want to know when we're blocked on ui.system, and why. Allow the user to supply a tag - otherwise we record on an unspecific tag derived from cmd.

ui: log time spent blocked on stdio We use a wrapper around Mercurial at Facebook that logs key statistics (like elpased time) to our standard performance tooling. This is less useful than it could be, because we currently can't tell when a command is slow because we need to fix Mercurial versus when a command is slow because the user isn't interacting quickly. Teach Mercurial to log the time it spends blocked, so that our tooling can pick it up and submit it with the elapsed time - we can then do the math in our tooling to see if Mercurial is slow, or if the user simply failed to interact. Combining this with the command duration log means that we can ensure that we concentrate performance efforts on the things that bite Facebook users. The perfwrite microbenchmark shifts from: Linux: ! wall 3.213560 comb 0.410000 user 0.350000 sys 0.060000 (best of 4) Mac: ! wall 0.342325 comb 0.180000 user 0.110000 sys 0.070000 (best of 20) before this change to: ! wall 3.478070 comb 0.500000 user 0.420000 sys 0.080000 (best of 3) Mac: ! wall 0.218112 comb 0.220000 user 0.150000 sys 0.070000 (best of 15) showing a small hit in comb time, but firmly in the noise on wall time.

contrib: add a write microbenchmark to perf.py I'm adding some performance logging to ui.write - this benchmark lets us confirm that the cost of that logging is acceptably low. At this point, the microbenchmark on Linux over SSH shows: ! wall 3.213560 comb 0.410000 user 0.350000 sys 0.060000 (best of 4) while on the Mac locally, it shows: ! wall 0.342325 comb 0.180000 user 0.110000 sys 0.070000 (best of 20)

ui: provide a mechanism to track and log blocked time We want to log the time Mercurial spends trapped in things outside programmatic control. Provide a mechanism to give us both command runtime and as many different sources of blocking as we deem useful.

mercurial: switch to util.timer for all interval timings util.timer is now the best available interval timer, at the expense of not having a known epoch. Let's use it whenever the epoch is irrelevant.

util: introduce timer() As documented for timeit.default_timer, there are better timers available for performance measures on some platforms. These timers don't have a set epoch, and thus are only useful for interval measurements, but have higher resolution, and thus get you a better measurement overall. Use the same selection logic as Python's timeit.default_timer. This is a platform clock on Python 2 and early Python 3, and time.perf_counter on Python 3.3 and later (where time.perf_counter is introduced as the best timer to use).

color: move the '_render_effects' function to the core module

color: move '_effect_str' function into the core module

color: move configstyles into the core module The extension is getting thinner as we speak!

color: rework conditional 'valideffect' Not very important, but the full conditional is not that hard to follow and having it unified make the function role a bit clearer in my opinion.

color: move 'valideffect' function into the core module

color: move '_terminfo_params' into the core 'color' module On step closer to have color in core.

color: move '_effect' mapping into core This is the second things we can move into core safely.

color: spread '_effect' values for readability We move to our "usual" one value per line style.

merge with stable

update: clarify that -C and -c are mutually exclusive This makes it clear in both the synopsis and in the verbose output that -C and -c are mutually exclusive. It also restructures the verbose output a little so it's better prepared for a third option (--merge). This patch also reorders the options to match the flag table.

update: move check for dirty wdir into hg.updatetotally() The function has a "check" parameter that's currently unused, and it makes sense to me to have it honor it. That way other callers than commands.update() could set it if they needed.

destutil: drop now-unused "check" parameter from destupdate()

destutil: remove duplicate check and leave it to merge.update() The check is done in merge.update() already and the next few patches will add more checks there. Some of the additional checks will need information about the merge that will not be available in destutil. Since commands.postincoming() catches UpdateAbort(), we need to change merge.update() to raise that more specific exception. This goes directly again 45b86dbabbda (destupdate: move the check related to the "clean" logic in the function, 2015-10-05), but it will simplify the next few patches, and we can always move it out again (preferably move, not copy) after if we still think it's better that way.

make: update .PHONY targets

debugcommands: move 'debugwireargs' in the new module

debugcommands: move 'debugwalk' in the new module

debugcommands: move 'debugtemplate' in the new module

debugcommands: move 'debugsuccessorssets' in the new module

debugcommands: move 'debugsub' in the new module

debugcommands: move 'debugstate' in the new module

debugcommands: move 'debugsetparents' in the new module

debugcommands: move 'debugrevspec' in the new module

debugcommands: move 'debugrevlog' in the new module

debugcommands: move 'debugrename' in the new module

debugcommands: move 'debugrebuildfncache' in the new module

debugcommands: move 'debugrebuilddirstate' in the new module

debugcommands: move 'debugpvec' in the new module

debugcommands: move 'debugpushkey' in the new module

ui: remove urllib2 from being imported early Before this change, urllib2 was brought in when constructing the ui object, and that added ~5ms on my Linux workstation to the hg startup time for every command, bringing the time for 'HGRCPATH=/dev/null hg root' from 46ms to 40ms. Now, we construct a single proxy object per initial ui creation (so that if the ui is copied they share the object), but defer the actual instantiation of it and the import of urllib2 until it's needed. # no-check-commit

tests: switch "this command isn't paged" example to id I'm about to enable pager support in summary.

tests: update test-i18n.t to not depend on the pager extension I'm about to mark that extension as deprecated, and that broke this test.

pager: add a test of --pager=no functionality I'm about to upend the pager universe, but I would like to not regress anything.

hg: allow usage of XDG_CONFIG_HOME/hg/hgrc Modern applications must use the following paths to store configuration files: - $XDG_CONFIG_HOME/hg/hgrc, - $HOME/.config/hg/hgrc (if XDG_CONFIG_HOME is unset or not absolute). For backward compatibility, ~/.hgrc is still created if no hgrc exist using hg config --edit. See https://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

debugcommands: move 'debugpathcomplete' in the new module

debugcommands: move 'debugobsolete' in the new module

debugcommands: move 'debuglocks' in the new module

debugcommands: move 'debugnamecomplete' in the new module

debugcommands: move 'debugmergestate' in the new module

debugcommands: move 'debuglabelcomplete' in the new module

dispatch: start profiling earlier This makes it possible to profile extension loading and setup, which takes a substantial fraction of overall execution time for fast commands. (99% of this commit is simply changes of indentation to reflect the hoisting of the two calls to maybeprofile to a single one that happens earlier.) # no-check-commit

dispatch: move detection of profiling earlier during startup

ui: fix configwith doctest 4.2 cannot be expressed with IEEE floating point losslessly, and could cause test failure on some platform: File ".../mercurial/ui.py", line 414, in mercurial.ui.ui.configwith Failed example: u.configwith(float, s, 'float2') Expected: -4.2 Got: -4.2000000000000002 This patch fixes that by changing the number to 4.25, which can be expressed by the binary number 100.01.

test-bdiff: move import inside the function to avoid test failure test-check-module-imports.t fails on some systems where the path of home directories is different than sys.prefix and sys.exec_prefix. Importing silenttestrunner will help avoiding that failure.

profiling: add statprof support for Chrome trace viewer rendering We synthesize function call begin/end events from snapshots, and try (configurably) to eliminate "noisy" stack frames. Example invocation: hg --config profiling.output=$HOME/Desktop/clone.json \ --config profiling.statformat=chrome \ --profile clone https://www.mercurial-scm.org/repo/hg

statprof: allow rendering in the Chrome trace viewer format

statprof: add a path simplification function

ui: rewrite configint in terms of configwith

ui: add a configwith method This is a long-overdue generalization of the pattern in configint and configbool.

py3: convert the mode argument of os.fdopen to unicodes (2 of 2)

py3: convert the mode argument of os.fdopen to unicodes (1 of 2) os.fdopen() does not accepts bytes as its second argument which represent the mode in which the file is to be opened. This patch makes sure unicodes are passed in py3 by using pycompat.sysstr().

bugzilla: add a rest api backend (usable with bugzilla 5.0+) Add support for the bugzilla rest api documented at https://wiki.mozilla.org/Bugzilla:REST_API and at https://bugzilla.readthedocs.io/en/latest/ This backend has the following benefits: * It supports the bugzilla api keys so hgrc does not need to contain a user's bugzilla password * Works with Mercurial's "hostfingerprints" support making handling bugzilla instances with self-signed certs easier * Does not use xmlrpc ;-) Adds configuration item 'apikey' in [bugzilla] section. My major concern with these patches is if the approach to HTTP access is the right way for an extension and if hooking into request object and the overriding the get_method to perform PUT requests was a sensible approach. # no-check-commit

keepalive: honor urllib2 style get_method overrides In urllib2 docs and discussions it can be found that in order to make a request other than GET or POST the get_method of a Request object can be overriden. Make Mercurial's internal version of this honor the return value of get_method. Please see the followup patch to the bugzilla extension for the reason for this change. Marking RFC because I'm not entirely sure this is the right way make the HTTP requests.

lock: include Linux pid namespace identifier in prefix Previously, the lock only contains a hostname as an attempt to detect pid namespace difference. However, that's not enough on modern Linux - a single hostname could have different pid namespaces. That means if people run hg inside different PID namespaces with a same UTS namespae, the lock would be broken - an hg proccess in pid namespace A will think the lock having a "random" pid in pid namespace B is "dead" and remove it. This patch solves the above issue by appending an PID namespace identifier of the current process to the lock prefix ("hostname"). It depends on /proc being mounted properly. But I don't think there is a better way to get pid namespace identifier reliably.

lock: move lock._host calculation to a function This allows customization per platform. See the next patch for why.

debugcommands: move 'debugknown' in the new module

debugcommands: extract debuginstall in the debugcommands module

dispatch: load debugcommand before extension Multiple extension will manipulate commands on load, we need the debug command to be loaded before that point.

merge with stable

localrepo: avoid unnecessary sorting headrevs output already sorted, no need to sort it again.

localrepo: cache self.changelog in local variable Repeated self.changelog lookups can incur overhead. Let's cache it in the separate variable.

destutil: remove dead code about non-linear updates IIUC, the non-linear updates no longer happen by default since 6b1fc09c699a (update: change default destination to tipmost descendant (issue4673) (BC), 2016-02-02), and it was only if they happened by default that we used to error out, so there is no longer a need to handle this case.

update: fix typo/stale comment to match code The comment about "obsolete.background" seems to have been about obsolete.foreground ever since it was introduced in a59e575c6ff8 (update: allow dirty update to foreground (successors), 2013-04-16), so let's change it.

merge: remove unused handling of default destination in merge.update() As far as I can tell, all the callers of merge.update() have been migrated over to use destutil to find the default destination when the revision was not specified. So it's time to delete the code for handling a node value of None. Let's add an assertion that node is not None, so any extensions relying on it will not silently misbehave.

update: localize logic around which ancestor to use The merge code works by applying the changes between an ancestor and the working copy onto the destination. To achieve an update, it sets the ancestor to be the parent of the working copy. To achieve a clean update (update -C), it sets the ancestor to be the working copy itself (so there are no changes to carry over). The logic for this was spread out a bit. Let's move it all to one place so it's easier to follow the reason for it. Also add some documentation.

tests: add test for updating to null revision While working on merge.py, I realized that we don't (as far as I could tell) have any tests for updating to the null revision with a dirty working copy. This adds some simple tests for that.

import: mention "stdin" (abbreviated) and add example I actually didn't even think it was possible because I searched the help text for "stdin", and didn't even think of searching for "standard input". Let's mention the abbreviated form too to help others like me. (When importing from stdin, we actually print a message saying "applying patch from stdin".) This patch also adds an example showing how to import from stdin.