merge with stable

largefiles: commit directories that only contain largefiles (issue3548) If we pass a directory to commit whose only commitable files are largefiles, the core commit code aborts before finding the largefiles. So we do the following: For directories that only have largefiles as matches, we explicitly add the largefiles to the matchlist and remove the directory. In other cases, we leave the match list unmodified.

revset.children: ignore rev numbers that are too low This replaces unnecessary parentrevs() calls with calculating min(parentset). Even though the min operation is O(size of parentset), since parentrevs is relatively expensive, this tradeoff almost always works in our favour. In a repository with over 400,000 changesets, hg perfrevset "children(X)" takes: Set X Before After -1 0.51s 0.06s -1000: 0.55s 0.08s -10000: 0.56s 0.10s -100000: 0.60s 0.25s -100000:-99000 0.55s 0.19s 0:100000 0.60s 0.61s all() 0.72s 0.74s The relative performance is similar for Mercurial's own repository -- several times faster in most cases, slightly slower for revisions close to 0 and all().

perf: add a command to measure revset performance

run-tests: fix whitespace nonsense

merge with mpm

run-tests: on windows, put correct python at front of PATH The older approach of trying to copy the python executable into the test directory was doomed to fail. There remains one weakness with this approach: if you've run "make local", tests may pick up the wrong extension DLLs from inside the source tree. I don't know why this happens. A reasonable workaround for now is to test either using --local or with a working directory that does not contain built DLLs.

run-tests: fix exename on Windows

run-tests: support running tests in parallel on windows Previously, we used os.spawnvp, which doesn't exist on Windows, and isn't needed anyway (the command line begins with an absolute path). We also need a slightly more convoluted way to wait for processes without specifying an order on Windows, as it lacks os.wait.

makefile: allow local builds to work on windows/mingw32

check-code: make 'missing whitespace in assignment' more aggressive New warnings: > a.b=ab missing whitespace in assignment (the pattern did not accept '.' on the left hand side) > a=a missing whitespace in assignment (the right hand side pattern never matched a single character) > a=a + 7 missing whitespace in assignment (the pattern only matched one character after the identifier following =)

check-code: there must also be whitespace between ')' and operator The check pattern only checked for whitespace between keyword and operator. Now it also warns: > x = f(),7 missing whitespace after , > x = f()+7 missing whitespace in expression

rm: drop misleading 'use -f' hint for the rm --after 'not removing' warning A warning mentioning 'forgetting' or 'recording delete' would be more correct than 'not removing' but also more confusing.

contrib: state explicitly how hgtest.vim can be installed

tests: kill daemons early, making breaking at "Accept" prompt safe

run-tests: use correct python safely under --jobs

run-tests: check for the correct python when starting

run-tests: use correct python when run with --local

synthrepo: do not crash if a list is empty

hgwebdir: do not show RSS and Atom links for plain directories Up until now the templates that show RSS and Atom feeds on the "repository lists" (i.e. gitweb and monoblue) showed them for all entries, including regular folders. Clicking on those "folder RSS" links would result in an error page being shown. This patch hides those links for regular folders.

hgweb: add branches RSS and Atom feeds There were no RSS nor Atom feeds for the branches page. Different hgweb templates linked to different feeds on their branches page (some linked to the tags feed, some to the log feed and some to the unexisting branches feed).

push: reunite comment with the line of code it describes

bookmarks: spelling correction in docstring

merge: fix mistake in moved _checkcollision call from 5881d5b7552f

windows: correctly pass a mode to S_IFMT in statfiles

strip: make query to get new bookmark target cheaper The current query to get the new bookmark target for stripped revisions involves multiple walks up the DAG, and is really expensive, taking over 2.5 seconds on a repository with over 400,000 changesets even if just one changeset is being stripped. A slightly simplified version of the current query is max(heads(::<tostrip> - <tostrip>)) We make two observations here. 1. For any set s, max(heads(s)) == max(s). That is because revision numbers define a topological order, so that the element with the highest revision number in s will not have any children in s. 2. For any set s, max(::s - s) == max(parents(s) - s). In other words, the ancestor of s with the highest revision number not in s is a parent of one of the revs in s. Why? Because if it were an ancestor but not a parent of s, it would have a descendant that would be a parent of s. This descendant would have a higher revision number, leading to a contradiction. Combining these two observations, we rewrite the revset query as max(parents(<tostrip>) - <tostrip>) The time complexity is now linear in the number of changesets being stripped. For the above repository, the query now takes 0.1 seconds when one changeset is stripped. This speeds up operations that use repair.strip, like the rebase and strip commands.

graft: explicit current node tracking This changes graft to explicitly track the progression of commits it makes, and updates it's idea of the current node based on it's last commit, rather than from the working copy parent. This should have no effect on the value of current since we were reading the working copy parent immediately after commiting to it. The motivation for this change is that a subsequent patch will break the current node and working copy relationship. Splitting this out into a separate patch will make that one more readible.

graft: move commit info building This moves the logic for generating the commit metadata ahead of the merge operation. The only purposae of this patch is to make subsequent patches easier to read, and there should be no behavior changes.

merge with stable

merge: support calculating merge actions against non-working contexts This is not currently used. It is instead a pre-requisite to performing non-conflicting grafts in memory, which a subsequent patch will do.

merge: refactor action calculation into function This pulls the code used to calculate the changes that need to happen during merge.update() into a separate function. This is not useful on its own, but is instead preparatory to performing grafts in memory when there are no potential conflicts.

dirstate: inline more properties and methods in status hg perfstatus -u on a working directory with 170,000 files, without this change: ! wall 1.839561 comb 1.830000 user 1.120000 sys 0.710000 (best of 6) With this change: ! wall 1.804222 comb 1.790000 user 1.140000 sys 0.650000 (best of 6) hg perfstatus on the same directory, without this change: ! wall 1.016609 comb 1.020000 user 0.670000 sys 0.350000 (best of 10) With this change: ! wall 0.985573 comb 0.980000 user 0.650000 sys 0.330000 (best of 10)

perf: add option to perfstatus to get the status of unknown files When status needs to look at unknown files (e.g. when running hg status), it needs to use a completely different algorithm than when it doesn't (e.g. when running hg diff).

dirstate: test normalize is truthy instead of using a no-op lambda hg perfstatus -u on a working directory with 170,000 files, without this change: ! wall 1.869404 comb 1.850000 user 1.170000 sys 0.680000 (best of 6) With this change: ! wall 1.839561 comb 1.830000 user 1.120000 sys 0.710000 (best of 6)

merge with stable

hgweb: avoid generator exhaustion with branches

hgweb: fix iterator reuse in atom feed generation

tests: don't hardcode errno==2 for ENOENT Hurd seems to set ENOENT to 2 + 2**30, unlike everyone else.

osutil: tab damage, how i hate thee

osutil: write a C implementation of statfiles for unix This makes a big difference to performance. In a clean working directory containing 170,000 files, performance of "hg --time diff" improves from 2.38 seconds to 1.69.

merge with i18n

i18n-ja: synchronized with f94ead934067

Added signature for changeset 0c10cf819146

Added tag 2.4.1 for changeset 0c10cf819146

osutil: fix tab damage

Merge with crew

osutil: factor out creation and init of listdir_stat

dirstate: avoid use of zip on big lists In a clean working directory containing 170,000 tracked files, this improves performance of "hg --time diff" from 1.69 seconds to 1.43. This idea is due to Siddharth Agarwal.

dirstate: move file type filtering to its source This prepares us to move to a much faster statfiles implementation on Unix.

clfilter: rename `unfilteredmeth` to `unfilteredmethod` As originally intended.

clfilter: fix a false positive in the test-obsolete.t We push between two repo which once filtered looks unrelated. Weakness in the current implementation allows this push to be done without -f. But later improvement with filtering will make this push fails for unrelatedness. However we want this push to fail for including bumped changeset. So we had a smaller push --force to make them related.

clfilter: ensure that filecache on localrepo is unfiltered All filecache usage on repo is for logic that should be unfiltered. The caches should be common to all filtered instances, and computation must be done unfiltered. A dedicated storecache subclass is created for this purpose.

clfilter: add a propertycache that must be unfiltered Some of the localrepo property caches must be computed unfiltered and stored globally. Some others must see the filtered version and store data relative to the current filtering. This changeset introduces two classes `unfilteredpropertycache` and `filteredpropertycache` for this purpose. A new function `hasunfilteredcache` is introduced for unambiguous checking for cached values on unfiltered repos. A few tweaks are made to the property cache class to allow overriding the way the computed value is stored on the object. Some logic relative to _tagcaches is cleaned up in the process.

largefile: status is buggy on repoproxy, so run unfiltered For some yet-unkown reason, largefile status does not work on repoproxy. As status is not affected by filtering, we run it unfiltered. Na'Tosha Bard's view on this issue: "but, well, largefiles status is kind of an unholy piece of code"

clfilter: mq should not warn about filtered mq patches MQ warns when qstatus contains unknown nodes. With changelog filtering, a node may be unknown because it is filtered. Thus, an unfiltered repo is used for this check.

clfilter: ensure that mq performs commits on unfiltered repos

clfilter: use unfiltered repo for bookmark push logic The remote location of the bookmark may be filtered locally. This changeset ensures that bookmark movement logic has access to all the repo's content.

clfilter: `bookmark.validdest` should run on unfiltered repo The logic recently added to `bookmark.validdest` uses data about obsolete changesets to see if a bookmark destination is valid. Obsolete changesets are likely to be filtered, so we need to work on an unfiltered repository.

clfilter: unfilter some parts of the push logic Computation of common changesets during push needs to be done on the widest set possible. An unfiltered version of the repo is kept for discovery and various revset calls. The discovery code itself enforces the filtering of unserved outgoing changeset.

subrepo: add argument to "diff()" to pass "ui" of caller side (issue3712) (API) Color extension achieves colorization by overriding the class of "ui" object just before command execution. Before this patch, "diff()" of abstractsubrepo and classes derived from it has no "ui" argument, so "diff()" of hgsubrepo uses "self._repo.ui" to invoke "cmdutil.diffordiffstat()". For separation of configuration between repositories, revision 573bec4ab7ba changed the initialization source of "self._repo.ui" from "ui"(overridden) to "baseui"(plain) of parent repository. And this caused break of colorization. This patch adds "ui" argument to "diff()" of abstractsubrepo and classes derived from it to pass "ui" object of caller side.

clfilter: prevent unwanted warning about filtered parents as unknown During changectx __init__ the dirstate's parents MAY be checked. If the repo is filtered, this check will complain "working directory has unknown parents" even if the parents are perfectly known. This may happen when the repo is used for serving and the dirstate has parents that are secret, as those secret changesets will be filtered.

clfilter: strip logic should be unfiltered Strip is a "write" operation that needs to be aware of the whole repo's content before destroying changesets. Only the low level function is altered. The top level command will still process its argument filtered (if any filtering is in place).

clfilter: verify logic should be unfiltered To verify a changelog obviously needs all of it. The verify logic now ensures it works on an unfiltered repository.

clfilter: phases logic should be unfiltered Phase computations and boundary movements need to be aware of all revisions that exist in the repository to return correct results.