hgwebdir: wrap {entries} with mappinggenerator No bare generator should be put in a template mapping.

eol: look up partial nodeid as partial nodeid Similar reasoning as the previous patch. For some reason the hook gives us a partial nodeid, so we need to resolve that to a full nodeid. Differential Revision: https://phab.mercurial-scm.org/D3159

histedit: look up partial nodeid as partial nodeid I'm about to remove support for repo[<partial hex nodeid>]. In the verify() method, we know that self.node is always a partial or full binary nodeid, so the most correct way to look up the revision is by using changelog._partialmatch(), so let's do that. (It's closer to the current code to do scmutil.revsymbol(), but that's less correct because it will match a bookmark or tag that happens to have the same prefix as the node.) Differential Revision: https://phab.mercurial-scm.org/D3158

histedit: drop unnecessary check for "self.node is not None" We are doing hex(self.node) just a few lines up, so it shouldn't be None. The only way it could be none is if it was reassigned in between. The only way that can happen is if the user had put a "ffff..." wdirhex revision in the histedit script. This code is much older than the "ffff..." identifier, so I'm confident it's not there to handle that case. I'll let someone else add proper checks for "ffff..." if they care enough. Differential Revision: https://phab.mercurial-scm.org/D3157

context: extract partial nodeid lookup method to scmutil We will add another caller soon, and there's a non-obvious reason to use the unfiltered repo that we don't want to copy across the code base. Differential Revision: https://phab.mercurial-scm.org/D3189

templatekw: fix return type of {succsandmarkers} (BC) A hybrid object represents a list/dict of values, but {succsandmarkers} returns a list of template mappings. This change means old-style list templates (e.g. "start_succsandmarkers") are no longer supported, but that should be okay since {succsandmarkers} is still experimental and relatively new.

formatter: remove template resources from nested items before generating JSON

templater: add public interface returning a set of resource keys The next patch depends on knownresourcekeys(), and there's no reason to keep availableresourcekeys() private.

formatter: make nested items somewhat readable in template output

templater: wrap result of '%' operation so it never looks like a thunk This fixes min/max()/json() of map result. Before, it was taken as a lazy byte string and stringified by evalfuncarg().

wireproto: support for pullbundles Pullbundles are similar to clonebundles, but served as normal inline bundle streams. They are almost transparent to the client -- the only visible effect is that the client might get less changes than what it asked for, i.e. not all requested head revisions are provided. The client announces support for the necessary retries with the partial-pull capability. After receiving a partial bundle, it updates the set of revisions shared with the server and drops all now-known heads from the request list. It will then rerun getbundle until no changes are received or all remote heads are present. Extend badserverext to support per-socket limit, i.e. don't assume that the same limits should be applied to all sockets. Differential Revision: https://phab.mercurial-scm.org/D1856

filelog: wrap revlog instead of inheriting it (API) The revlog base class exposes a ton of methods. Inheriting the revlog class for filelog will make it difficult to expose a clean interface. There will be abstraction violations. This commit breaks the inheritance of revlog by the filelog class. Filelog instances now contain a reference to a revlog instance. Various properties and methods are now proxied to that instance. There is precedence for doing this: manifestlog does something similar. Although, manifestlog has a cleaner interface than filelog. We'll get there with filelog... The new filelog class exposes a handful of extra properties and methods that aren't part of the declared filelog interface. Every extra item was added in order to get a test to pass. The set of tests that failed without these extra proxies has significant overlap with the set of tests that don't work with the simple store repo. There should be no surprise there. Hopefully the hardest part about this commit to review are the changes to bundlerepo and unionrepo. Both repository types define a custom revlog or revlog-like class and then have a custom filelog that inherits from both filelog and their custom revlog. This code has been changed so the filelog types don't inherit from revlog. Instead, they replace the revlog instance on the created filelog. This is super hacky. I plan to fix this in a future commit by parameterizing filelog.__init__. Because Python function call overhead is a thing, this change could impact performance by introducing a nearly empty proxy function for various methods and properties. I would gladly measure the performance impact of it, but I'm not sure what operations have tight loops over filelog attribute lookups or function calls. I know some of the DAG traversal code can be sensitive about the performance of e.g. parentrevs(). However, many of these functions are implemented on the revlog class and therefore have direct access to self.parentrevs() and aren't going through a proxy. .. api:: filelog.filelog is now a standalone class and doesn't inherit from revlog. Instead, it wraps a revlog instance at self._revlog. This change was made in an attempt to formalize storage APIs and prevent revlog implementation details leaking through to callers. Differential Revision: https://phab.mercurial-scm.org/D3154

util: drop write_content_size=True This is now the default in python-zstandard 0.9. While we're here, also add a comment about the ability to drop frame magic to save space. Differential Revision: https://phab.mercurial-scm.org/D3199

zstandard: vendor python-zstandard 0.9.0 This was just released. It features a number of goodies. More info at https://gregoryszorc.com/blog/2018/04/09/release-of-python-zstandard-0.9/. The clang-format ignore list was updated to reflect the new source of files. The project contains a vendored copy of zstandard 1.3.4. The old version was 1.1.3. One of the changes between those versions is that zstandard is now dual licensed BSD + GPLv2 and the patent rights grant has been removed. Good riddance. The API should be backwards compatible. So no changes in core should be needed. However, there were a number of changes in the library that we'll want to adapt to. Those will be addressed in subsequent commits. Differential Revision: https://phab.mercurial-scm.org/D3198

revlog: reset _nodepos after strip When using the pure revlog parser, _nodepos is used to keep track of the position during index scanning in the non-cached cache. If it is out of bounds, BaseIndexObject._fix_index will assert. Since strip can actually remove the position scanned last, make sure to reset it. Add an assertion in the place where the invariance is clearer. Differential Revision: https://phab.mercurial-scm.org/D3188

paper: make all source lines have the same minimum height Empty source lines in paper and coal themes used to have smaller height than every other line (because of the way line numbers are shown and because they are using smaller font). This wasn't very noticeable before the follow lines functionality was added, but after that just using the follow-lines button to select a block of code with empty lines would demonstrate the fact that empty lines didn't have enough height - there were white "gaps" in the selection block. Since this problem occurs when lines don't have any content inside, let's create a pseudo-element (it's unselectable because of that) which still doesn't have any content, but fills up empty lines to 100% of their height because of display: inline-block. This is the most natural way to solve this annoyance that I've found so far. Hardcoding height isn't useful because we can have wrapped lines, in which case multiple lines of text need to fit into a single <span>. Setting min-height or line-height doesn't remove the gaps when viewed in Chromium.

hgweb: make followlines button absolutely positioned It used to have position: absolute only on annotate page, but it makes sense to have it everywhere, because the button shouldn't affect other elements at all. Especially since the button has a set height, which meant that for certain smaller fonts source lines were changing their height on hover. Note that the button doesn't set any of the usual properties that accompany absolute position (top, right, bottom or left). These properties would position the button without any account for source line padding. Instead, margins are used (the button already has all margins defined, they do the job).

hgweb: insert followlines buttons before any children, including text nodes This way the buttons come before any other content, including text nodes. Because highlight extension replaces every line of text with some <span> elements that have CSS classes for highlighting, the placement of followlines buttons used to depend on if that extension was enabled or not. Let's make the placement more consistent, it'll help the next patch in this series.

wireproto: only expose "debugwireargs" to version 1 transports I'm not even sure this command should be enabled for version 1 transports. It is just a reflection endpoint for argument data. We definitely don't need to support it in version 2. Differential Revision: https://phab.mercurial-scm.org/D3184

wireproto: only expose "hello" command to version 1 transports This command is only ever used for the handshake in the SSH protocol. We probably don't even need for it to be a proper command. Let's not carry it forward to version 2 because I don't see a use for it there. Differential Revision: https://phab.mercurial-scm.org/D3183

wireproto: port branchmap to wire protocol v2 Differential Revision: https://phab.mercurial-scm.org/D3182

wireproto: port listkeys commands to wire protocol v2 Differential Revision: https://phab.mercurial-scm.org/D3181

wireproto: port keep command to wire protocol v2 This is pretty straightforward. Differential Revision: https://phab.mercurial-scm.org/D3180

wireproto: port heads command to wire protocol v2 After much thought and consideration, wire protocol version 2's commands will be defined in different functions from the existing commands. This will make it easier to implement these commands because it won't require shoehorning things like response formatting and argument declaration into the same APIs. For example, wire protocol version 1 requires that commands declare a fixed and ordered list of argument names. It isn't really possible to insert new arguments or have optional arguments without breaking backwards compatibility. Wire protocol version 2, however, uses CBOR maps for passing arguments. So arguments a) can be optional b) can be added without BC c) can be strongly typed. This commit starts our trek towards reimplementing the wire protocol for version 2 with the heads command. It is pretty similar to the existing heads command. One added feature is it can be told to operate on only public phase changesets. This is useful for making discovery faster when a repo has tens of thousands of draft phase heads (such as Mozilla's "try" repository). The HTTPv2 server-side protocol has had its `getargs()` implementation updated to reflect that arguments are a map and not a list. Differential Revision: https://phab.mercurial-scm.org/D3179

largefiles: wrap heads command handler more directly extensions.wrapfunction() is a more robust method for wrapping a function, since it allows multiple wrappers. While we're here, wrap the function registered with the command instead of installing a new command handler. Differential Revision: https://phab.mercurial-scm.org/D3178

wireproto: crude support for version 2 HTTP peer As part of implementing the server-side bits of the wire protocol command handlers for version 2, we want a way to easily test those commands. Currently, we use the "httprequest" action of `hg debugwireproto`. But this requires explicitly specifying the HTTP request headers, low-level frame details, and the data structure to encode with CBOR. That's a lot of boilerplate and a lot of it can change as the wire protocol evolves. `hg debugwireproto` has a mechanism to issue commands via the peer interface. That is *much* easier to use and we prefer to test with that going forward. This commit implements enough parts of the peer API to send basic requests via the HTTP version 2 transport. The peer code is super hacky. Again, the goal is to facilitate server testing, not robustly implement a client. The client code will receive love at a later time. Differential Revision: https://phab.mercurial-scm.org/D3177

tests: extract wire protocol shell helpers to standalone file This will make it easier for other tests to get up and running without the boilerplate. Differential Revision: https://phab.mercurial-scm.org/D3176

addbranchrevs: no longer accept revset as "revs" (API) The only caller was removed in 0b4692b9646d (bundle: avoid repo.lookup() for converting revnum to nodeid, 2018-04-02). Differential Revision: https://phab.mercurial-scm.org/D3192

clone: avoid using repo.lookup() with binary nodeid The code in hg.clone() is a bit of a mess, but it seems like the "checkout" variable is always a binary nodeid (tests pass when run with "assert len(checkout) == 20" before the repo.lookup()). repo.lookup() will soon work only with string inputs, so we need remove this use. Differential Revision: https://phab.mercurial-scm.org/D3191

merge: avoid unnecessary conversion from binary nodeid to binary nodeid "node" is already a binary nodeid here, so there's no need to convert it. repo.lookup() will soon lose support for binary nodeids as input. Differential Revision: https://phab.mercurial-scm.org/D3190