copies: detect graft-like merges Right now, nothing changes as a result of this, but we want to handle grafts differently from ordinary merges later. (Series developed together with Pierre-Yves David)

tests: introduce tests for grafting through renames These cover all currently known cases of renames being grafted, or changes being grafted through renames. Right now, most of these cases are broken. Later patches in this series will make them behave correctly. The testcases heavily rely on each other, which would make it very difficult to separate them and add them one-by-one for each case fixed by a patch. Separating them should perhaps be a 4.1 task, if it doesn't slow down the tests too much. (Developed together with Pierre-Yves David)

largefiles: fix 'deleted' files sometimes persistently appearing with R status A code snippet that has been around since largefiles was introduced was wrong: Standins no longer found in lfdirstate has *not* been removed - they have probably just been deleted ... or not created. This wrong reporting did that 'up -C' didn't undo the change and didn't sync the two dirstates. Instead of reporting such files as removed, propagate the deletion to the standin file and report the file as deleted.

largefiles: more safe handling of interruptions while updating modifications Largefiles are fragile with the design where dirstate and lfdirstate must be kept in sync. To be less fragile, mark all clean largefiles as unsure ("normallookup") before updating standins. After standins have been updated and we know exactly which largefile standins actually was changed, mark the unchanged largefiles back to clean ("normal"). This will make the failure mode more safe. If interrupted, the next command will continue to perform extra hashing of all largefiles. That will do that all largefiles that are out of sync with their standin will be marked dirty and they will show up in status and can be cleaned with update --clean.

largefiles: test coverage of fatal interruption of update Test using existing changesets in a clean working directory, revealing problems with files that don't show up as modified or do show up as removed when they just not have been written yet.

checkcopies: add a sanity check against false-positive copies When grafting a copy backwards through a rename, a copy is wrongly detected, which causes the graft to be applied inappropriately, in a destructive way. Make sure that the old file name really exists in the common ancestor, and bail out if it doesn't. This fixes the aggravated case of bug 5343, although the basic issue (failure to duplicate the copy information) still occurs.

exchange: refactor APIs to obtain bundle data (API) Currently, exchange.getbundle() returns either a cg1unpacker or a util.chunkbuffer (in the case of bundle2). This is kinda OK, as both expose a .read() to consumers. However, localpeer.getbundle() has code inferring what the response type is based on arguments and converts the util.chunkbuffer returned in the bundle2 case to a bundle2.unbundle20 instance. This is a sign that the API for exchange.getbundle() is not ideal because it doesn't consistently return an "unbundler" instance. In addition, unbundlers mask the fact that there is an underlying generator of changegroup data. In both cg1 and bundle2, this generator is being fed into a util.chunkbuffer so it can be re-exposed as a file object. util.chunkbuffer is a nice abstraction. However, it should only be used "at the edges." This is because keeping data as a generator is more efficient than converting it to a chunkbuffer, especially if we convert that chunkbuffer back to a generator (as is the case in some code paths currently). This patch refactors exchange.getbundle() into exchange.getbundlechunks(). The new API returns an iterator of chunks instead of a file-like object. Callers of exchange.getbundle() have been updated to use the new API. There is a minor change of behavior in test-getbundle.t. This is because `hg debuggetbundle` isn't defining bundlecaps. As a result, a cg1 data stream and unpacker is being produced. This is getting fed into a new bundle20 instance via bundle2.writebundle(), which uses a backchannel mechanism between changegroup generation to add the "nbchanges" part parameter. I never liked this backchannel mechanism and I plan to remove it someday. `hg bundle` still produces the "nbchanges" part parameter, so there should be no user-visible change of behavior. I consider this "regression" a bug in `hg debuggetbundle`. And that bug is captured by an existing "TODO" in the code to use bundle2 capabilities.

mergecopies: rename 'ca' to 'base' This variable was named after the common ancestor. It is actually the merge base that might differ from the common ancestor in the graft case. We rename the variable before a larger refactoring to clarify the situation. Similar rename was also applied to 'checkcopies' in a prior changeset.

copies: move variable document from checkcopies to mergecopies It appears that 'mergecopies' is the function consuming these data so we move the documentation there.

checkcopies: pass data as a dictionary of dictionaries more are coming

checkcopies: move 'movewithdir' initialisation right before its usage The 'movewithdir' had a lot of related logic all around the 'mergecopies'. However it is actually never containing anything until the very last loop in that function. We move the (simplified) variable definition there for clarity

cmdutil: satisfy expections in dirstateguard.__del__, even if __init__ fails Python "delstructors" are terrible - this one because it assumed that __init__ had completed before it was called. That would not necessarily be the case if the repository was read only or broken and saving the dirstate thus failed in unexpected ways. That could give confusing warnings about missing '_active' after failures. To fix that, make sure all member variables are "declared" before doing anything that possibly could fail. [Famous last words.]

util: increase filechunkiter size to 128k util.filechunkiter has been using a chunk size of 64k for more than 10 years, also in years where Moore's law still was a law. It is probably ok to bump it now and perhaps get a slight win in some cases. Also, largefiles have been using 128k for a long time. Specifying that size multiple times (or forgetting to do it) seems a bit stupid. Decreasing it to 64k also seems unfortunate. Thus, we will set the default chunksize to 128k and use the default everywhere.

largefiles: always use filechunkiter when iterating files Before, we would sometimes use the default iterator over large files. That iterator is line based and would add extra buffering and use odd chunk sizes which could give some overhead. copyandhash can't just apply a filechunkiter as it sometimes is passed a genuine generator when downloading remotely.

revset: for x^2, do not take null as a valid p2 revision Since we don't count null p2 revision as a parent, x^2 should never return null even if null is explicitly populated.

revset: make follow() reject more than one start revisions Taking only the last revision is inconsistent because ancestors(set) follows all revisions given, and theoretically follow(startrev=set) == ancestors(set). I'm planning to add a support for multiple start revisions, but that won't fit to the 4.0 time frame. So reject multiple revisions now to avoid future BC. len(revs) might be slow if revs were large, but we don't care since a valid revs should have only one element.

bundle2: only emit compressed chunks if they have data This is similar to 58467204cac0. Not all calls into the compressor return compressed data, as the compressor may buffer compressed output internally. It is cheaper to check for empty chunks than to send empty chunks through the generator. When generating a gzip-v2 bundle of the mozilla-unified repo, this change results in 50,093 empty chunks not being sent through the generator (out of 1,902,996 total input chunks).

color: add some documentation for custom terminfo codes

color: debugcolor should emit the user-defined colors This also fixes a long-standing bug that reversed the sense of the color name and the label used to print it, which was never relevant before.

color: ignore effects missing from terminfo If terminfo mode is in effect, and an effect is used which is missing from the terminfo database, simply silently ignore the request, leaving the output unaffected rather than causing a crash.

color: allow for user-configurable terminfo codes for effects If the entry in the terminfo database for your terminal is missing some attributes, it should be possible to create them on the fly without resorting to just making them a color. This change allows you to have [color] terminfo.<effect> = <code> where <effect> might be something like "dim" or "bold", and <code> is the escape sequence that would otherwise have come from a call to tigetstr(). If an escape character is needed, use "\E". Any such settings will override attributes that are present in the terminfo database.

update: warn if cwd was deleted During update directories are deleted as soon as they have no entries. But if current working directory is deleted then it cause problems in complex commands like 'hg split'. This commit adds a warning that will help users figure the problem faster.

parsers: avoid PySliceObject cast on Python 3 PySlice_GetIndicesEx() accepts a PySliceObject* on Python 2 and a PyObject* on Python 3. Casting to PySliceObject* on Python 3 was yielding a compiler warning. So stop doing that. With this patch, I no longer see any compiler warnings when building the core extensions for Python 3!

bdiff: include util.h Without this, IS_PY3K isn't define and the preprocessor uses the incorrect module loading code, causing the module fail to load at run-time. After this patch, all our C extensions (except for watchman's) appear to import correctly in Python 3!

parsers: alias more PyInt* symbols on Python 3 I feel dirty for having to do this. But this is currently our approach for dealing with PyInt -> PyLong in Python 3 for this file. This removes a ton of compiler warnings by fixing unresolved symbols.

manifest: use PyVarObject_HEAD_INIT More appeasing the Python 3 and compiler overlords. The code is equivalent.

dirs: use PyVarObject_HEAD_INIT This makes a compiler warning go away on Python 3.

py3: use namedtuple._replace to produce new tokens

py3: refactor token parsing to handle call args properly The token parsing was getting unwieldy and was too naive about accessing arguments.

eol: make sure we always release the wlock when writing cache If any exception were to happen after we acquired the wlock, we could leave it unreleased. We move the wlock release in a 'finally:' close as it should be.