histedit: modify rollup to discard date from the rollup commit (issue4820) This change adjusts and documents the new behaviour of 'roll'. It now fits nicely with the behaviour of 'commit --amend' and the 'edit' action, by discarding the date as well as the commit message of the second commit. Previously it used the later date, like 'fold', but this often wasn't desirable, for example, in the common use case of using 'roll' to add forgotten changes to a changeset (because 'hg add' was previously forgotten or not all changes were identified while using 'hg record').

histedit: improve documentation and behaviour of dates This clarifies in the histedit documentation that the 'edit' action preserves the date and that the 'fold' action uses the later date. The documentation was previously silent on this issue which left users in doubt.

localrepo: check HG_PENDING strictly Before this patch, checking HG_PENDING for changelog in localrepo.py might cause unintentional reading unrelated '00changelog.i.a' in, because HG_PENDING is checked by str.startswith(). An external hook spawned by inner repository in nested ones satisfies this condition. This patch uses txnutil.mayhavepending() to check HG_PENDING strictly. BTW, this patch may cause failure of bisect in the repository of Mercurial itself, if examination at bisecting assumes that an external hook can see all pending changes while nested transactions across repositories. This invisibility issue will be fixed by subsequent patch, which allows HG_PENDING to refer multiple repositories.

phases: check HG_PENDING strictly Before this patch, checking HG_PENDING in phases.py might cause unintentional reading unrelated 'phaseroots.pending' in, because it just examines existence of HG_PENDING environment variable. This patch uses txnutil.trypending() to check HG_PENDING strictly. BTW, this patch may cause failure of bisect in the repository of Mercurial itself, if examination at bisecting assumes that an external hook can see all pending changes while nested transactions across repositories. This invisibility issue will be fixed by subsequent patch, which allows HG_PENDING to refer multiple repositories.

bookmarks: check HG_PENDING strictly Before this patch, checking HG_PENDING in bookmarks.py might cause unintentional reading unrelated '.hg/bookmarks.pending' in, because it just examines existence of HG_PENDING environment variable. This patch uses txnutil.trypending() to check HG_PENDING strictly. This patch also changes share extension. Enabling share extension (+ bookmark sharing) makes bookmarks._getbkfile() receive repo to be shared (= "srcrepo"). On the other hand, HG_PENDING always refers current working repo (= "currepo"), and bookmarks.pending is written only into currepo. Therefore, we should try to read .hg/bookmarks.pending of currepo in at first. If it doesn't exist, we try to read .hg/bookmarks of srcrepo in. Even after this patch, an external hook spawned in currepo can't see pending changes in currepo via srcrepo, even though such changes become visible after closing transaction, because there is no easy and cheap way to know existence of pending changes in currepo via srcrepo. Please see https://www.mercurial-scm.org/wiki/SharedRepository, too. BTW, this patch may cause failure of bisect in the repository of Mercurial itself, if examination at bisecting assumes that an external hook can see all pending changes while nested transactions across repositories. This invisibility issue will be fixed by subsequent patch, which allows HG_PENDING to refer multiple repositories.

tests: make directory to prevent test process from going out of $TESTTMP Before this patch, test process for test-bookmarks.t goes out of $TESTTMP at "cd .." before creation of "orderrepo" repository. To prevent test process from going out of $TESTTMP, this patch makes directory "repo" sub-directory and executes almost all test scenarios in test-bookmarks.t under it. This is preparation for new test added in subsequent patch.

txnutil: factor out the logic to read file in according to HG_PENDING This patch adds new file txnutil.py, because: - transaction.py is too large to import small utility logic - scmutil.py or so causes cyclic importing in phases.py mayhavepending() is defined separately for convenience in subsequent patch.

repoview: separate cache hash computation from cache reading This change will make it easier for extensions to use another cache hash.

tests: make test suite more immune to environment variables Plenty of tests break when "make tests" is run while environment variables "HGPLAIN" or "HGPLAINEXCEPT" are set (test "test-obsolete- checkheads.t" is just a single example). This patch causes script "run-tests.py" to also remove these two variables from the environment the tests are executed in.

version: enable pager if --verbose is specified `hg version` output is very short without --verbose, but with --verbose it tends to scroll off the user's screen.

tags: enable pager

summary: enable pager

status: enable pager

resolve: enable pager

paths: enable pager

outgoing: enable pager The structure here is similar to incoming, and requires similar treatment.

manifest: enable pager

locate: enable pager

incoming: enable pager The design of incoming means we have to activate the pager in several places, depending on which codepath gets chosen.

help: enable pager

grep: enable pager

files: enable pager

config: activate pager if not starting an editor This demonstrates the power of the non-attend-based pager API.

qdiff: migrate to modern pager API This results in the default pager-attend list being empty. Sadly, we can't let the code be that way, because some legacy extensions depend on hooking the pager's attend list at import time (and we'd like to not break them), and if the list is actually *empty* that triggers magic behavior in the extension that attends everything. Instead, we put a long, improbable command name as the only entry in the attend list.

log: migrate to modern pager API

export: migrate to modern pager API

diff: migrate to modern pager API

cat: migrate to modern pager API

annotate: start pager after we're sure we wont abort This avoids needlessly putting a short error message into the pager.

dispatch: consolidate pager flag handling to a single place This makes a little more sense, thanks to Martin for suggesting it.

ui: rename neverpager to disablepager I agree this is a clearer name for this method.

scmutil: proxy revrange() through repo to break import cycles This was one of the hardest import cycles as scmutil is widely used and revset functions are likely to depend on a variety of modules. New repo.anyrevs() does not expand user aliases by default to copy the behavior of the existing repo.revs(). I don't want to add new function to localrepository, but this function is quite similar to repo.revs() so it won't increase the complexity of the localrepository class so much.

revset: split language services to revsetlang module (API) New revsetlang module hosts parser, tokenizer, and miscellaneous functions working on parsed tree. It does not include functions for evaluation such as getset() and match(). 2288 mercurial/revset.py 684 mercurial/revsetlang.py 2972 total get*() functions are aliased since they are common in revset.py.

revset: import set classes directly from smartset module Follows up 1be65deb3d54.

help: add pointer how to narrow list of resolved/unresolved files (issue5469)

shelve: add -n/--name option to unshelve (issue5475) This makes using shelve/unshelve more consistent because shelving can be done using name option and unshelving as well. Author of the idea of this improvement and solution is joshgold.

smartset: use native set operations as fast paths For set operations like "&" and "-", where we know both basesets have their sets ready, and the first set is sorted, use the native Python set operations as a fast path. Note: "+" is not optimized as that will break the ordering. This leads to noticeable improvements on performance: revset | before | after | delta ---------------------------------------------------------------- draft() & draft() & draft() & draft() | 776 | 477 | -39% draft() + draft() + draft() + draft() | 2849 | 2864 | draft() - draft() + draft() - draft() | 943 | 240 | -75% draft() - draft() - draft() - draft() | 557 | 197 | -64% (time measured in microseconds)

smartset: add some doctests Add doctests explaining the set / list behavior. This will make the following changes more confident.

obsolete: avoid using revset language to compute the obsolete revset This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. See previous patches for the motivation. Now we have APIs in phasecache to get the non-public set efficiently, let's use it directly instead of going through the "not public()" revset language in "obsolete()" computation. This patch was meaured using: for i in 'public()' 'not public()' 'draft()' 'not draft()'; do hg perfrevset "$i"; hg perfrevset "$i" --hidden; done and no noticeable (> 1%) performance difference was observed.

revset: use phasecache.getrevset This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. See the previous patch for motivation. This patch changes revset code to use phasecache.getrevset so it no longer accesses the private field: _phasecache._phasesets directly. For performance impact, this patch was tested using the following query, on my hg-committed repo: for i in 'public()' 'not public()' 'draft()' 'not draft()'; do echo $i; hg perfrevset "$i"; hg perfrevset "$i" --hidden; done For the CPython implementation, most operations are unchanged (within +/- 1%), while "not public()" and "draft()" is noticeably faster on an unfiltered repo. It may be because the new code avoids a set copy if filteredrevs is empty. revset | public() | not public() | draft() | not draft() hidden | yes | no | yes | no | yes | no | yes | no ------------------------------------------------------------------ before | 19006 | 17352 | 239 | 286 | 180 | 228 | 7690 | 5745 after | 19137 | 17231 | 240 | 207 | 182 | 150 | 7687 | 5658 delta | | -38% | | -52% | (timed in microseconds) For the pure Python implementation, some operations are faster while "not draft()" is noticeably slower: revset | public() | not public() | draft() | not draft() hidden | yes | no | yes | no | yes | no | yes | no ------------------------------------------------------------------------ before | 18852 | 17183 | 17758 | 15921 | 17505 | 15973 | 41521 | 39822 after | 18924 | 17380 | 17558 | 14545 | 16727 | 13593 | 48356 | 43992 delta | | -9% | -5% | -15% | +16% | +10% That may be the different performance characters of generatorset vs. filteredset. The "not draft()" query could be optimized in this case where both "public" and "secret" are passed to "getrevsets" so it won't iterate the whole repo twice.

phases: add a getrevset method to phasecache This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. The motivation behind this was chg repo preloading - to make the obsstore depend on less things (like the revset language). The refactoring also looks good by itself - phasecache does not expose its private field "_phasesets" via public methods and revset.py is accessing it in a hacky way. This patch adds a "getrevset" method, which takes multiple phases and returns a revset in an best-effort efficient way - for "public" phase, it returns a lazy generatorset; for "draft" and "secret", it returns efficient "baseset".

smartset: convert set to list lazily If the caller only wants to construct a baseset via a set, and then do "__contains__" tests. It's unnecessary to initialize the list. Testing on my unfiltered hg-committed repo where len(draft()) is 2600, this patch shows about 6% improvement on set intensive queries: Before: $ for i in `seq 5`; hg perfrevset 'draft() & draft() & draft() & draft()' ! wall 0.001196 comb 0.000000 user 0.000000 sys 0.000000 (best of 2011) ! wall 0.001191 comb 0.000000 user 0.000000 sys 0.000000 (best of 2099) ! wall 0.001186 comb 0.010000 user 0.010000 sys 0.000000 (best of 1953) ! wall 0.001182 comb 0.000000 user 0.000000 sys 0.000000 (best of 2135) ! wall 0.001193 comb 0.000000 user 0.000000 sys 0.000000 (best of 2177) After: $ for i in `seq 5`; hg perfrevset 'draft() & draft() & draft() & draft()' ! wall 0.001128 comb 0.000000 user 0.000000 sys 0.000000 (best of 2247) ! wall 0.001119 comb 0.000000 user 0.000000 sys 0.000000 (best of 2317) ! wall 0.001115 comb 0.000000 user 0.000000 sys 0.000000 (best of 2244) ! wall 0.001131 comb 0.000000 user 0.000000 sys 0.000000 (best of 2093) ! wall 0.001124 comb 0.000000 user 0.000000 sys 0.000000 (best of 2134) It could have bigger impact on larger sets in theory.

ui: construct _keepalnum list in a python3-friendly way It'll be more expensive, but it preserves the behavior.

match: making visitdir() deal with non-recursive entries Primarily as an optimization to avoid recursing into directories that will never have a match inside, this classifies each matcher pattern's root as recursive or non-recursive (erring on the side of keeping it recursive, which may lead to wasteful directory or manifest walks that yield no matches). I measured the performance of "rootfilesin" in two repos: - The Firefox repo with tree manifests, with "hg files -r . -I rootfilesin:browser". The browser directory contains about 3K files across 249 subdirectories. - A specific Google-internal directory which contains 75K files across 19K subdirectories, with "hg files -r . -I rootfilesin:REDACTED". I tested with both cold and warm disk caches. Cold cache was produced by running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced by re-running the same command a few times. These were the results: Cold cache Warm cache Before After Before After firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s Certain extensions, notably narrowhg, can depend on this for correctness (not trying to recurse into directories for which it has no information).

match: adding support for matching files inside a directory This adds a new "rootfilesin" matcher type which matches files inside a directory, but not any subdirectories (so it matches non-recursively). This has the "root" prefix per foozy's plan for other matchers (rootglob, rootpath, cwdre, etc.).

runtests: add an IPv6 command line flag Now we have all IPv6 related issues fixed, add a command line flag so people could actually run tests with IPv6.

runtests: always set web.ipv6 Previously, we only set web.ipv6 if IPv6 is used, but not on the IPv4 case. Since we already have set web.address, it makes sense to move "web.ipv6" out from "extra config options".

runtests: set web.address to localhost Previously, "hg serve" will listen on "", which is not clear which interface it will actually listen on - it could listen on all interfaces (ex. 0.0.0.0 on IPv4). The run-tests.py script only checks "localhost" for available ports. So let's make it the same for "hg serve" by explicitly setting "web.address" to "localhost". This resolves some IPv6 EADDRINUSE errors.