revset: mark the fact we should use '&' instead of 'filter' in 'head' I do not have time to fix all this now, let's mark it for later.

revset: gratuitous formating fix in keyword You will be aligned.

revset: gratuitous code move in '_children' As 'cs' is empty as the time of the conditional, we can just return an empty 'baseset' and create the variable later.

revset: mark spots that should use 'smartset.min()' Using smartset's min will be significantly faster when the input set can provided an optimised answer. I do not have time to fix all of them but I'm marking the spot.

revset: mark the place where we are combining sets in the wrong direction We should always combine with subset as the left operand (to preserve the order). I do not have time to fix all of them so I'm just marking the spot.

revset: point out wrong behavior in fullreposet I cannot fix all issues in revset because I've got other things to do, but let's write down all the brokenness to help other people reading and fixing.

revsetbenchmarks: also display tag when printing a revision This is usually more useful information than the commit message.

revsetbenchmarks: clean up revsets that achieved with default variants We remove revset making use of min and max as this is covered by the variants. We could use variant for roots too, but it is not in the default so keep it here.

revsetbenchmarks: use combination variants in default set Now that we have them, let's make use of them.

revsetbenchmarks: support combining variants with "+" We need more advanced variants in some cases. For example, "The last rev of the sorted version". We introduce a syntax for this: `reverse+last` means `last(reverse(REVSET))`.

revsetbenchmarks: use many more variants by default So far the variants feature was introduced, but not used by default. We now use a set of basic variants by default.

revsetbenchmarks: display even more compact timing result We now use an 8 char display for timing (from 10), we add some logic to drop precision if the number grows too large (as we do not care about sub-0 digit in this case). This allow to pack more variants in a single screen.

revsetbenchmarks: allow running multiple variants per revset The current benchmarks were only testing the whole iteration. This is suboptimal because some changes are meaningful for things like first result, minimum or sorting. We introduce a "variants" feature that let you systematically add some variants to all revsets tested. A typical variants value would be 'plain,min,last,sort'. When testing 'all()' it will also provide testing for: - all() - min(all()) - last(all()) - sort(sort) and output: plain min last sort 0) 0.034568 0.037857 0.000074 0.034238 1) 0.011358 32% 0.020181 53% 0.000080 108% 0.011405 33% Using revsets (who hit the API) instead of the internal API add some overhead, but the overhead should be the same everywhere so it still allow comparison. This is is more simple to implement and allows comparison with older versions who do not have the same API.

revsetbenchmarks: display relative change when meaningful If the time difference is more than 5% from the previous run, we'll display relative information. This makes it much simpler to spot performance changes in a sea of benchmarks.

revsetbenchmarks: improve revision printing We now print the revision number and short hash inline. As a result we drop the crappy list printing.

revsetbenchmarks: hide most timing under a --verbose flag We mostly only care about total time. Dropping this output give us some room to display more useful information (like percentage different) in future changesets.

revsetbenchmarks: drop outdated comment We are no longer testing against system mercurial for quite some time.

revsetbenchmarks: fix argument parsing The file doc was saying something, the code was doing something else, the argument validation was doing a third thing. Doc and behavior now comply with the argument defined in the code.

revsetbenchmarks: use a more compact output format with a header We change the output from: revset #0: draft() 0) wall 0.011989 comb 0.010000 user 0.000000 sys 0.010000 (best of 177) 1) wall 0.012226 comb 0.010000 user 0.000000 sys 0.010000 (best of 193) 2) wall 0.011838 comb 0.020000 user 0.000000 sys 0.020000 (best of 208) to: revset #0: draft() wall comb user sys count 0) 0.012028 0.010000 0.000000 0.010000 170 1) 0.012218 0.010000 0.000000 0.010000 157 2) 0.012622 0.010000 0.000000 0.010000 189 This opens the road to more useful output.

revsetbenchmarks: clarify comment based on irc discussion

revsetbenchmarks: ensure all indexes have the same width This avoids an alignment glitch.

revsetbenchmarks: factor out result output into a function This will make update of the output easier.

revsetbenchmarks: parse perfrevset output into actual number We cannot just ask perfrevset to provide debug output because we usually want to compare output from old version of Mercurial that do not support it. So, we are using a regular expression. (/we now have \d problems/).

revsetbenchmarks: improve error output in case of failure This helps with diagnostics.

revsetbenchmarks: extract call to mercurial into a function This is a gratuitous change to make the code easier to look at.

phases: really fix native phase computation For some reason (probably rebase issue, leprechaun or badly resolved .rej) 1635579f9baf contains only half of the emailed patches and do not fix the bug. This patch adds the other half and enable the sweet native computation for real. As expected this provide massive speedup along the board. revset #0: not public() plain first 0) 0.011960 0.010523 1) 0.000465 3% 0.000492 4% revset #1: (tip~1000::) - public() plain first 0) 0.025700 0.025169 1) 0.002864 11% 0.001899 7% revset #2: not public() and branch("default") plain first 0) 0.022842 0.020863 1) 0.011418 49% 0.010948 52% However, it has a less impact (even bad) on first result time in simple situation. This comes from the overhead of building the set and filtering it. This is especially true on my Mercurial repository (used here) where about 1/3 of the changesets are non public and hidden. This could be mitigated by a caching of the set and a better usage of smartset in '_notpublic'. (But this won't happen in this patch because the win is massive everywhere else). revset #0: not public() last 0) 0.000081 1) 0.000493 x6.1 <-- bad impact revset #1: (tip~1000::) - public() last 0) 0.013966 1) 0.002737 19% revset #2: not public() and branch("default") last 0) 0.011021 1) 0.011038 The effect mostly disappear when the number of non-public changesets is small and/or the repo get bigger. Result for Mozilla central: Mozilla revset #0: not public() plain first last 0) 0.092787 0.084094 0.000080 1) 0.000054 0% 0.000083 0% 0.000083 revset #1: (tip~1000::) - public() plain first last 0) 0.215607 0.183996 0.124962 1) 0.031620 14% 0.006616 3% 0.031168 24% revset #2: not public() and branch("default") plain first last 0) 0.092626 0.082687 0.000162 1) 0.000139 0% 0.000165 0% 0.000167

hgweb: don't point file links at tip hash where it doesn't make sense Some pages, e.g. bookmarks, help and summary don't have a meaningful revision context: they always either show information about tip or about the whole repo (and not about any specific changeset). And error pages can just show hgweb error messages, not related to any repo or changeset. Having a hash in the links worked (even when '{node|short}' resolved to an empty string on error pages), but seeing pages without revision context provide links with hashes is a bit confusing (unless you keep current tip hash in your head at all times) and not consistent with other template styles and other links on the same page: they don't have a hash. Let's just link to '/file', which is equal to '/file/tip'.

hgweb: don't point graph links at tip hash where it doesn't make sense Some pages, e.g. bookmarks, help and summary don't have a meaningful revision context: they always either show information about tip or about the whole repo (and not about any specific changeset). And error pages can just show hgweb error messages, not related to any repo or changeset. When monoblue style was added in 91b0ada2d94b, however, all graph links had tried to point at some hash, and on such pages as described above it didn't make sense. On error pages '{node|short}' is empty string anyway. Of course, it worked, but seeing such pages without revision context provide links with hashes is a bit confusing (unless you keep current tip hash in your head at all times) and wasn't consistent with other template styles, other pages in monoblue and even other links on the same page. Let's just link to '/graph', which is equal to '/graph/tip'.

hgweb: put help link in paper/search.tmpl separately for consistency Just a cosmetic markup change, no .css changes required.

help: use 'color' as an example (instead of 'progress') Progress is now deprecated, using it as an example is suboptimal.

progress: deprecate the progress extension Activating it is a absolute no-op now.

progress: empty the extension of any logic The default value match the one enforce by the extension, we can remove that logic.

progress: move config help into core config help This is core feature now.

progress: display progress bars by default with core Mercurial As discussed multiple time during sprint, we should activate progress by default. Having progress bar significantly improve the user experience.

bundle2: provide number of changesets information to 'addchangegroup' We can now link the two efforts and provided more useful information when pulling changesets.

addchangegroup: accept an expected total number of changesets as argument Caller can optionally informs how much changesets are expected to be added. This will be used for a more useful progress bar output.

getbundle: add data about the number of changesets bundled We use an advisory parameters to carry the number of changesets bundled. This will be used for progress output.

tests: test basic template support for status

templates: add a default template style for status Color doesn't work yet, so no labels here.

formatter: add template support This lets all the non-log commands that use the formatter use templates. There are still some things that don't work, for instance: - color (needs "repo" in map) - shortest (needs "ctx" in map)

formatter: add a method to build a full templater from a -T option

formatter: move most of template option helper to formatter We want to share this function between formatter and cmdutils. It doesn't belong in templater because it imports knowledge of ui layers that shouldn't be there. We'd prefer cmdutil to layer on the formatter rather than vice-versa. Since the formatter is the handler for -T options for all non-log commands, let's move the helper there. We leave the bits specific to the old --style option behind.

color: copy docstring of label() template function to wrapper Otherwise label() wouldn't be listed in "hg help template" if color extension is enabled.

templater: make pad function evaluate both string and rawstring templates "pad" function and "rawstring" type were introduced in parallel, aa51392da507 in default and 5ab28a2e9962 in stable respectively. Therefore, "pad" function lacked handling of "rawstring" unintentionally.

largefiles: ignore hidden changesets with 'verify --large --lfa' Previously, if there were any hidden changesets, the --lfa argument would cause the command to abort with a hint about using --hidden when it tripped over a hidden changeset.

bundle2: clarify in docstring that header size is for a single header The docstring for the header size field currently says "The total number of Bytes used by the part headers", but the size is about a single header, so let's change it to "header".

bundle2: rename duplicate handlepushkeyreply to handleobsmarkerreply The function was only called through the parthandlermapping dict, so it was confusing but safe in practice.

changegroup: remove 'getchangegroupraw' function There is no remaining caller for this function.

exchange: expand usage of getchangegroupraw The 'getchangegroupraw' is very simple (two lines) so we inline it in its only caller. This exposes the 'outgoing' object of the part generator function, allowing us to add information on the number of changesets contained in the part in a later changeset. Such information is useful for progress bar.

getbundle: have a single getchangegroupraw call site Having a single call site will simplify the code and help with coming refactoring.

phases: abort the whole push if phases fail to update (BC) When using bundle2, the phase pushkey parts are now made mandatory. As a result, failure to update the bookmark server side will result in the transaction being aborted.

bookmarks: abort the whole push if bookmarks fails to update (BC) When using bundle2, the bookmark's pushkey parts are now made mandatory. As a result failure to update the bookmark server side will result in the transaction being aborted.

httppeer: allow extensions to replace urllib2.Request The authentication library my extension wants to use requires using a different opener and a different request builder. This change pulls the call to urllib2.Request out so that my extension can replace it just like it can replace urlopener.

progress: move all logic altering the ui object logic in mercurial.ui The ui object can take care of its progress object logic by itself. test-subrepo-recursion is modified because it is a bit sensitive to the "no progress bar" default. It will become unnecessary in the next step when progress will be on by default in core.

progress: move the singleton logic to the ui module The use of a singleton for all of progress handling is debatable (because config may vary). However this is how the extension has been doing it so far. We move that code into the ui module because this is where is should belong when progress is moved into core.

progress: move most extension code into a 'mercurial.progress' module This initiate the relocation of progress into core.

test-subrepo-recursion: restore globs for Windows

tests: restore 'python' and '$TESTDIR/' for dummyssh invocation This is a backout of 46727fea7a00, and a partial backout of c3ecbf694904. Windows won't execute 'dummyssh' directly, presumably because CreateProcess() doesn't know how to execute a bash script: $ hg clone -e "dummyssh" ssh://user@dummy/cloned sshclone remote: 'dummyssh' is not recognized as an internal or external command, remote: operable program or batch file. abort: no suitable response from remote hg! [255] With the restoration of python as the executable, $TESTDIR needs to be restored for these invocations, because python won't search $PATH for 'dummyssh': $ hg clone -e "python dummyssh" ssh://user@dummy/cloned sshclone remote: python: can't open file 'dummyssh': [Errno 2] No such file or directory abort: no suitable response from remote hg! [255]

perf: support -T for every perf commands We are already building a formatter, we can now pass it options the official way.

bundle2: convey PushkeyFailed error over the wire We add a way to convey the precise exception. This will allow better error message on the server.

bundle2: also capture reply capability on failure When unbundling over the wire is aborted, we have a mechanism to convey the error inside a bundle part. As we add support for more errors, we need to know if the client will support them. For this purpose, we duck punch the reply capabilities of the client on the raised extensions. This is similar to what is done to salvage the server output on error.

bundle2: add an 'error' capability This capability will be extended as new error type is introduced.

merge with stable

templater: introduce indent function