Martin von Zweigbergk <martinvonz@google.com> [Tue, 02 Dec 2014 16:39:59 -0800] rev 23472
update: remove redundant and misplaced merge tests
The "nothing to merge" case is covered by test-merge-default.t.
The "uncommitted changes" case is covered by test-merge1.t (and
others).
The "merge -f" case is covered by test-merge-force.t.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 21 Nov 2014 13:02:45 -0800] rev 23471
largefiles: use clearer debug messages in actions
In overridecalculateupdates(), 'g' (get) actions may be converted into
other actions. In most of these cases, it does not make sense to keep
the action's message. For example, 'remote created' does not make
sense for an 'r' (remove) action.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 21 Nov 2014 11:44:57 -0800] rev 23470
largefiles: don't clobber merge action message with user message
The message in the action is used for debugging and should not be the
same as the question presented to the user. Use a different variable
for the user message, so the 'msg' variable already in scope does not
get overwritten.
Ryan McElroy <rmcelroy@fb.com> [Tue, 02 Dec 2014 20:31:19 -0800] rev 23469
bookmarks: factor out repository lookup from writing bookmarks file
This will allow the share extension to extend bookmarks functionality to share
bookmarks between repositories.
Mike Edgar <adgar@google.com> [Thu, 04 Dec 2014 12:02:02 -0500] rev 23468
parsers: ensure revlog index node tree is initialized before insertion
Currently, the revlog index C implementation assumes its node tree will be
initialized before a new element is inserted by revnum. For example, revlog.py
executes 'self.index.insert(-1, e)' in _addrevision(). This is only safe
because the node tree has been initialized by a "node in self.nodemap"
check made in addrevision().
(For context, this was discovered while developing an experimental revlog
mixin which stores "elided nodes" via a separate code path from
_addrevision(); that new code path segfaults without this patch.)
Yuya Nishihara <yuya@tcha.org> [Wed, 03 Dec 2014 22:56:42 +0900] rev 23467
revset: add 'only' to DoS-safe symbols
There is no reason to disable it in hgweb because the same query can be
written without using 'only()'.
Yuya Nishihara <yuya@tcha.org> [Wed, 03 Dec 2014 22:52:54 +0900] rev 23466
revset: move 'only' so that functions are sorted alphabetically
Matt Harbison <matt_harbison@yahoo.com> [Tue, 02 Dec 2014 22:42:41 -0500] rev 23465
tests: drop unnecessary glob that causes a warning on Windows
This was triggered by 3778884197f0.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 03 Dec 2014 10:01:24 -0800] rev 23464
merge: add test with conflicting file and remote directory rename
Changset 88629daa727b (merge: demonstrate that directory renames can
lose local file content, 2014-12-02) should clearly have added the
reverse version of the test: where the remote side renamed a
directory, added a new file in that directory, and the local directory
added a conflicting file in the source directory. Add such a test now,
and also touch up the ones already added slightly (e.g. 'local' was a
stupid value for content that can be on either side of a merge).
Martin von Zweigbergk <martinvonz@google.com> [Wed, 03 Dec 2014 15:03:29 -0800] rev 23463
graft: use a real conflict for the tests
One of the graft tests grafts a changeset that changes a file's
content from 'a' to 'b' onto a branch that has changed the file's
content from 'a', via 'b', and then back to 'a' again. To prepare for
not considering this a file in need of merging, let's use 'c' as the
file's new content to make sure it has to be considered
conflicting.
There's a second similar case further down where an ancestor is
grafted. Make sure that is also considered a conflict.
John Coomes <john.coomes@oracle.com> [Wed, 03 Dec 2014 14:33:29 -0800] rev 23462
add: use lexists so that broken symbolic links are added
This restores the add behavior prior to d8cdd46f426d and matches the
behavior of addremove.
Mads Kiilerich <madski@unity3d.com> [Tue, 02 Dec 2014 05:12:59 +0100] rev 23461
rebase: avoid redundant repo[rev].rev() - just keep working in rev space
Mads Kiilerich <madski@unity3d.com> [Tue, 02 Dec 2014 05:12:59 +0100] rev 23460
rebase: always store rev in state, also when collapsing
Mads Kiilerich <madski@unity3d.com> [Tue, 02 Dec 2014 05:12:53 +0100] rev 23459
rebase: clarify naming of variables holding node hashes - don't call them rev
Ryan McElroy <rmcelroy@fb.com> [Thu, 27 Nov 2014 00:24:25 -0800] rev 23458
bookmarks: factor out bookmark file opening for easier extensibility
Matt Mackall <mpm@selenic.com> [Tue, 02 Dec 2014 17:19:20 -0600] rev 23457
merge with stable
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 22:18:05 -0800] rev 23456
diff: explicitly honor all diffopts
'hg diff' should naturally honor all diffopts.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 22:16:46 -0800] rev 23455
annotate: explicitly only honor whitespace diffopts
The whitespace ones are the only ones the annotate logic cares about anyway, so
there's no visible impact.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 21:47:47 -0800] rev 23454
notify: explicitly honor all diffopts
The notify output doesn't seem to be parseable anyway, what with the maxdiff
config option. Plus it is designed mainly for servers where hopefully the
admins are doing sensible things.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 22:13:05 -0800] rev 23453
jsonchangeset: don't honor whitespace and format-changing diffopts
JSON is meant to be parsed by computers, and format changes can break them.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 21:49:05 -0800] rev 23452
transplant: don't honor whitespace and format-changing diffopts
transplant uses diff purely internally.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 21:38:19 -0800] rev 23451
hgk: don't honor whitespace and format-changing diffopts
The diff-tree command is a plumbing command in Git, which means it is expected
to have a stable output format. Ensure that our output is stable too.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 17:36:24 -0800] rev 23450
patchbomb: don't honor whitespace and format-changing diffopts (BC)
The whitespace diffopts break lossless transmission, and the format-changing
ones make import harder. We expect parsers to be able to read git-style diffs,
though.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 26 Nov 2014 11:45:21 -0800] rev 23449
merge: add more thorough tests for --force
With generate-working-copy-states.py generalized to support
arbitrarily many changesets, we can use it for generating test cases
for merge: use one changeset each for base, remote and local. With the
various working copy states, this is a total of 104 cases.
The first candidate for additional testing is 'hg merge --force'. Even
though the force option is deprecated, it is convenient for testing
because it can be tested without first needing to revert any
changes. Except for the lack of checking for uncommitted changes, it
differs in only a few cases from unforced merge.
The new tests cover all the cases in the existing test-merge-force.t,
except for the unforced merge case, which is covered in several other
files anyway, so nothing remains of the file after this patch.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 26 Nov 2014 10:25:27 -0800] rev 23448
merge: display modify/delete conflict prompts in sorted order
The order is determined by manifest.diff(), which currently is not
sorted. There are currently no tests for this, but we will soon add
some that would be flaky without this patch.
Martin von Zweigbergk <martinvonz@google.com> [Sun, 09 Nov 2014 00:10:29 -0800] rev 23447
generate-working-copy-states: accept depth arguments on command line
Add a parameter to generate-working-copy-states.py that indicates
how many changesets are wanted. This number impacts all the
subcommands. The current 'filelist' subcommand becomes 'filelist 2',
the current 'base' and 'parent' subcommands become 'state 2 1' and
'state 2 2' respectively, while 'wc' becomes 'state 2 wc'.
See earlier patch for motivation.
Martin von Zweigbergk <martinvonz@google.com> [Sat, 08 Nov 2014 23:37:54 -0800] rev 23446
generate-working-copy-states: generalize for depth
The script can currently generate filenames and contents for exactly
two changesets plus the working copy. For some tests (e.g. of plain
dirstate status), only one changeset is needed, while for others
(e.g. merge), three changesets are needed. Let's prepare for such
tests by generalizing the code for any number of changesets.
Martin von Zweigbergk <martinvonz@google.com> [Sat, 29 Nov 2014 14:39:33 -0800] rev 23445
generate-working-copy-states: make 'tracked' a string
The only places the 'tracked' variable is only used is where it's
converted to a string, so let's simplify by using the string value
directly.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 02 Dec 2014 13:28:07 -0800] rev 23444
merge: demonstrate that directory renames can lose local file content
When a directory has been renamed on the local branch and a file has
been added in the old location on a remote branch, we move that new
file to the new location. Unfortunately, if there is already a file
there, we overwrite it with the contents from the remote branch. For
untracked local files, we should probably abort, and for tracked local
files, we should merge the contents. To start with, let's add a test
to demonstrate the breakage. Also note that while files merged in from
a remote branch are normally (and unintuitively) reported as modified,
these files are reported as added.
Mads Kiilerich <madski@unity3d.com> [Fri, 28 Nov 2014 03:09:19 +0100] rev 23443
mq: drop updateheader - inserthgheader and insertplainheader is enough
Mads Kiilerich <madski@unity3d.com> [Fri, 28 Nov 2014 03:09:06 +0100] rev 23442
mq: smarter handling of plain headers
6333412245ec and 5ccced6eab0b fixed issue4453 with a simple insertplainheader
function that fixed the regression but didn't make the implementation more
stable.
Now we introduce plain header handling similar to how we handle hg patches. The
whole header is scanned for fields to update while determining the best
position for inserting the field if it is missing. It also makes sure there is
an empty line between headers and body.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 30 Nov 2014 23:30:31 -0500] rev 23441
largefiles: drop the override for 'fetch'
The fetch extension has been calling cmdutil.bailifchanged() since a014fdc97154,
so this is redundant. Add test coverage to prevent regression. It doesn't look
like there is any testing for fetch with largefiles.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 02 Dec 2014 11:06:38 -0800] rev 23440
rebase: ignore negative state when updating back to original wc parent
The state mapping also contains some magic negative values (detached
parent, ignored revision). Blindly reading the state thus lead to
unfortunate usage of the negative value as an update destination. We
now filter them out.
We do a minor alteration of the test to catch this.
Eric Sumner <ericsumner@fb.com> [Fri, 21 Nov 2014 15:50:38 -0800] rev 23439
bundle2-push: provide transaction to reply unbundler
This patch series is intended to allow bundle2 push reply part handlers to
make changes to the local repository; it has been developed in parallel with
an extension that allows the server to rebase incoming changesets while applying
them.
This diff adds an experimental config option "bundle2.pushback" which provides
a transaction to the reply unbundler during a push operation. This behavior is
opt-in because of potential security issues: the response can contain any part
type that has a handler defined, allowing the server to make arbitrary changes
to the local repository.
Eric Sumner <ericsumner@fb.com> [Mon, 24 Nov 2014 16:04:44 -0800] rev 23438
bundle2.processbundle: let callers request default behavior
This patch series is intended to allow bundle2 push reply part handlers to
make changes to the local repository; it has been developed in parallel with
an extension that allows the server to rebase incoming changesets while applying
them.
The default transaction getter for processbundle is a private function that
raises an exception; this diff lets calling code pass None as the transaction
getter to explicitly request this default behavior.
The next diff will check a config option to determine whether to provide a
transaction to the reply bundle processor. If one shouldn't be provided, the
code needs a way to specify that the default behavior should be used.
Eric Sumner <ericsumner@fb.com> [Fri, 21 Nov 2014 15:06:38 -0800] rev 23437
push: elevate phase transaction to cover entire operation
This patch series is intended to allow bundle2 push reply part handlers to
make changes to the local repository; it has been developed in parallel with
an extension that allows the server to rebase incoming changesets while applying
them.
Most pushes already open a transaction in order to sync phase information.
This diff replaces that transaction with one that spans the entire push
operation.
This transaction will be used in a later patch to guard repository changes
made during the reply handler.
Eric Sumner <ericsumner@fb.com> [Fri, 21 Nov 2014 14:32:57 -0800] rev 23436
pull: extract transaction logic into separate object
This patch series is intended to allow bundle2 push reply part handlers to
make changes to the local repository; it has been developed in parallel with
an extension that allows the server to rebase incoming changesets while applying
them.
Aside from the transaction logic, the pulloperation class is used primarily as
a logic-free data structure for storing state information. This diff extracts
the transaction logic into its own class that can be shared with push
operations.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 20:00:37 -0800] rev 23435
record: don't honor format-changing diffopts (issue4459)
record does support the whitespace options, so honor those. In upcoming patches
we'll replace all the other uses.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 17:22:03 -0800] rev 23434
patch.difffeatureopts: add a feature for format-changing diffopts
Typically, callers that are interested in this set are also interested in the
others. We still add it as a first-class flag for convenience.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 17:09:26 -0800] rev 23433
patch.difffeatureopts: add a feature for whitespace diffopts
These aren't exactly format-breaking features -- just ones for which patches
applied to a repo will produce incorrect commits, In any case, some commands
like record and annotate only care about this feature.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 17:10:14 -0800] rev 23432
patch.difffeatureopts: add a feature for diff.git
This deserves to be its own feature -- indeed, this is often the only feature
several commands care about.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 21:43:38 -0800] rev 23431
patch: rename diffopts to diffallopts
This is meant to be used when all features are explicitly requested. diffopts
is kept as an alias for now -- it will go away soon.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 16:53:22 -0800] rev 23430
patch: add a new function to initialize diffopts by feature
Not all callers are interested in all diffopts -- for example, commands like
record (which use diff internally) break when diffopts like noprefix are
enabled. This function will allow us to add flags that callers can use to
enable only the features they're interested in.
Siddharth Agarwal <sid0@fb.com> [Tue, 18 Nov 2014 16:00:54 -0800] rev 23429
patch.diffopts: use a dict for initialization
In upcoming patches we'll conditionally add to and remove from the dict.
Matt Harbison <matt_harbison@yahoo.com> [Fri, 21 Nov 2014 22:24:45 -0500] rev 23428
largefiles: split the creation of a normal matcher out of its install method
Refactoring addremove to support subrepos will need the ability to keep passing
the same matcher and narrowing it, instead of monkey patching scmutil's matcher.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 01 Dec 2014 21:48:32 -0800] rev 23427
addremove: print relative paths when called with -I/-X (BC)
For "hg addremove 'glob:*.py'", we print any paths added or removed as
relative to the current directory, but when "hg addremove -I
'glob:*.py'" is used, we use the absolute path (relative from the repo
root). It seems like they should be the same, so change it so we use
relative paths in both cases. Continue to use absolute paths when no
patterns are given.
Matt Mackall <mpm@selenic.com> [Mon, 01 Dec 2014 19:34:11 -0600] rev 23426
merge with stable
Matt Mackall <mpm@selenic.com> [Mon, 01 Dec 2014 18:51:10 -0600] rev 23425
merge with i18n
Wagner Bruna <wbruna@softwareexpress.com.br> [Mon, 01 Dec 2014 11:21:30 -0200] rev 23424
i18n-pt_BR: synchronized with 3bd577a3283e
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 29 Nov 2014 14:32:12 +0900] rev 23423
i18n-ja: synchronized with edf29f9c15f0
Matt Mackall <mpm@selenic.com> [Mon, 01 Dec 2014 18:39:19 -0600] rev 23422
Added signature for changeset 902554884335
Matt Mackall <mpm@selenic.com> [Mon, 01 Dec 2014 18:39:14 -0600] rev 23421
Added tag 3.2.2 for changeset 902554884335
Mads Kiilerich <madski@unity3d.com> [Mon, 01 Dec 2014 02:30:21 +0100] rev 23420
merge: before cd/dc prompt, check that changed side really changed
Before, merging would in some cases ask "wrong" questions about
"changed/deleted" conflicts ... and even do it before the resolve phase where
they can be postponed, re"resolved" or answered in bulk operations.
Instead, check that the content of the changed file really did change.
Reading and comparing file content is expensive and should be avoided before
the resolve phase. Prompting the user is however even more expensive. Checking
the content here is thus better.
The 'f in ancestors[0]' should not be necessary but is included to be extra
safe.
Mads Kiilerich <madski@unity3d.com> [Mon, 01 Dec 2014 02:11:29 +0100] rev 23419
largefiles: don't show largefile/normal prompts if one side is unchanged
Mads Kiilerich <madski@unity3d.com> [Mon, 01 Dec 2014 02:11:17 +0100] rev 23418
tests: add test-issue3084.t cases for 'changed but same' as for 'unchanged'
Use suffix -same for cases where file changed but content is the same - that is
the case where manifestmerge doesn't detect that a file is unchanged.
(The suffix -id is already used for cases where the file didn't change - that
is the trivial case where manifestmerge detects that the file is unchanged.)
These new tests are good but the results are bad. There shouldn't be any merge
conflicts or prompts when one side didn't change.
Mads Kiilerich <madski@unity3d.com> [Mon, 01 Dec 2014 02:10:57 +0100] rev 23417
tests: clean-up of largefiles tests in test-issue3084.t
Prepare for adding more test cases to the systematic testing, moving the test
from ac3b3a2d976d to another section.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 29 Nov 2014 19:17:47 -0800] rev 23416
pushkey: gracefully handle prepushkey hook failure (issue4455)
This allow to gracefully report the failure of the bookmark push and carry on.
Before this change set. Local push would plain quit and wireprotocol would
failed in various ungraceful way.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 29 Nov 2014 19:13:35 -0800] rev 23415
hook: raise a more specialized HookAbort exception when a hook fails
We need to gracefully handle some aborts for pushkey, especially
because it leads to a user-facing crash over the wireprotocols. So we
need a more specialized exception to catch.
Matt Mackall <mpm@selenic.com> [Mon, 01 Dec 2014 15:04:34 -0600] rev 23414
help: fix typo in files help
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 01 Dec 2014 05:18:12 -0800] rev 23413
revset: fix first and last for generatorset (issue4465)
The code was just plain wrong.
Mads Kiilerich <madski@unity3d.com> [Fri, 28 Nov 2014 02:57:33 +0100] rev 23412
mq: fix update of headers that occur in the "wrong" order
Mq tried to insert headers in the right order. Sometimes it would stop
searching before checking all headers and it could thus duplicate a header
instead of replacing it.
Mathias De Maré <mathias.demare@gmail.com> [Fri, 28 Nov 2014 20:16:15 +0100] rev 23411
subrepo: add status support for ignored files in git subrepos
Retrieving the status of a git subrepo did not show ignored
files. Using 'git ls-files', we can retrieve these files
and display the correct status.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 26 Nov 2014 15:37:01 -0800] rev 23410
manifest: document the extra letter in working copy manifest node
As the second developer to get confused by this in November, I'm adding some
documentation for the next poor soul.
Gregory Szorc <gregory.szorc@gmail.com> [Fri, 28 Nov 2014 10:59:02 -0800] rev 23409
hgweb: send proper HTTP response after uncaught exception
This patch fixes a bug where hgweb would send an incomplete HTTP
response.
If an uncaught exception is raised when hgweb is processing a request,
hgweb attempts to send a generic error response and log that exception.
The server defaults to chunked transfer coding. If an uncaught exception
occurred, it was sending the error response string / chunk properly.
However, RFC 7230 Section 4.1 mandates a 0 size last chunk be sent to
indicate end of the entity body. hgweb was failing to send this last
chunk. As a result, properly written HTTP clients would assume more data
was coming and they would likely time out waiting for another chunk to
arrive.
Mercurial's own test harness was paving over the improper HTTP behavior
by not attempting to read the response body if the status code was 500.
This incorrect workaround was added in ba6577a19656 and has been removed
with this patch.
Mads Kiilerich <madski@unity3d.com> [Sun, 30 Nov 2014 20:06:53 +0100] rev 23408
tests: test rebase of merge of target ancestors
Mads Kiilerich <madski@unity3d.com> [Sun, 30 Nov 2014 19:36:03 +0100] rev 23407
tests: test coverage of parent order with p1 outside rebase set
Mads Kiilerich <madski@unity3d.com> [Sun, 30 Nov 2014 19:35:54 +0100] rev 23406
tests: add test for rebasing merges with ancestors of the rebase destination
This shows sub-optimal behaviour. The user gets a merge prompt that it is very
hard to justify.
Mads Kiilerich <madski@unity3d.com> [Sun, 30 Nov 2014 19:26:53 +0100] rev 23405
merge: 0 is a valid ancestor different from None
Most internal functions can take either a hash or an integer. Merge did however
not handle 0 as revision 0. Now it does.
Matt Mackall <mpm@selenic.com> [Thu, 27 Nov 2014 12:25:01 -0600] rev 23404
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 25 Nov 2014 19:40:54 -0800] rev 23403
revert: look for copy information for all local modifications
Renaming a file over an existing one marks the file as modified. So we
track rename source in modified file too.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 24 Nov 2014 18:42:56 -0800] rev 23402
rename: properly report removed and added file as modified (issue4458)
The result of 'hg rm' + 'hg rename' disagreed with the one from
'hg rename --force'. We align them on 'hg move --force' because it agrees with
what 'hg status' says after the commit.
Stopping reporting a modified file as added puts an end to the hg revert confusion in this
situation (issue4458).
However, reporting the file as modified also prevents revert from restoring the copy
source. We fix this in a later changeset.
Git diff also stop reporting the add in the middle of the chain as add. Not
sure how important (and even wrong) it is.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 26 Nov 2014 14:54:16 -0800] rev 23401
manifest: fix a bug where working copy file 'add' mark was buggy
Because the same dictionary was used to (1) get node from parent and (2) store
annotated version, we could end up with buggy values. For example with a chain
of renames:
$ hg mv b c
$ hg mv a b
The value from 'b' would be updated as "<old-a>a", then the value of c would be
updated as "<old-b>a'. With the current dictionary sharing this ends up with:
'<new-c>' == '<old-a>aa'
This value is double-wrong as we should use '<old-b>' and a single 'a'.
We now use a read-only value for lookup. The 'test-rename.t' test is impacted
because such a chained added file is suddenly detected as such.
anatoly techtonik <techtonik@gmail.com> [Wed, 26 Nov 2014 17:22:09 +0300] rev 23400
merge: be precise about what merged into what in short desc
Gregory Szorc <gregory.szorc@gmail.com> [Tue, 11 Nov 2014 20:32:10 -0800] rev 23399
docker: add Docker files for running an Apache mod_wsgi server
I frequently find myself wanting to run hgweb in a production-like
environment, with a real HTTP server and multiple WSGI workers.
This patch introduces a Docker environment for running Mercurial
under Apache + mod_wsgi. With just a few command executions, it is
possible to spin up a Docker container running hgweb.
The container is tailored for Mercurial developers wanting to run
Mercurial from a source checkout. It is **not** meant to be something
suitable for production use.
The container provides a default hgweb environment with an empty
repository that allows pushes. You can thus start a container and push
your favorite repository there for quick testing.
The container is designed to allow customizations. Users can provide
their own hgweb configurations and mount existing directories containing
repositories into the container.
The behavior of the container and how to control things is documented in
the README.rst file.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 16:17:02 -0800] rev 23398
merge: use None as filename for base in 'both created' conflicts
Instead of using a file that we know is not in the common ancestor's
maniffest, let's use None. This is safe as the only place that cares
about the value (applyupdates) already checks if the item exists in
the ancestor.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 16:42:36 -0800] rev 23397
merge: break out "both renamed a -> b" case
We can further limit the scope of the 2-way merge case by breaking out
the case where the file was not created from scratch on both sides but
rather renamed in the same way (and is therefore a 3-way merge). This
involves copying some code, but it makes it clearer which case the
"Note:" in the code refers to.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 16:16:34 -0800] rev 23396
merge: separate out "both created" cases
When 'f' is not in 'ma', 'a' will be 'nullid' and all the if/elif
conditions that check whether some one nodeid is equal to 'a' will
fail, and the else-clause will instead apply. We can make that more
explicit by creating a separate 'm' action for the case where 'a' is
'nullid'. While it does mean copying some code, perhaps it makes it a
little clearer which codepaths are possible, and which cases the
"Note:" in the code refers to. It also lets us make the debug action
messages a little more specific.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 16:11:22 -0800] rev 23395
merge: indent to prepare for next patch
Matt Mackall <mpm@selenic.com> [Tue, 25 Nov 2014 17:30:05 -0600] rev 23394
merge with stable
David Eckhardt <David.Eckhardt@cs.cmu.edu> [Tue, 25 Nov 2014 02:31:52 -0600] rev 23393
factotum: convert Plan 9 quoted string to Python string
Jeff Sickel <jas@corpus-callosum.com> [Tue, 25 Nov 2014 02:27:31 -0600] rev 23392
plan9: setup check for current python build
Matt Harbison <matt_harbison@yahoo.com> [Wed, 19 Nov 2014 22:27:55 -0500] rev 23391
add: check for the existence of a file matched inexactly before adding it
The change in 10697f29af2b created a problem on Windows and OS X:
--- /usr/local/mercurial/tests/test-issue660.t
+++ /usr/local/mercurial/tests/test-issue660.t.err
@@ -47,6 +47,8 @@
Should succeed - shadow removed:
$ hg add b
+ adding b/b
+ b/b does not exist!
Prior to the failing 'hg add', the file 'b/b' was added and committed, then 'b'
was recursively deleted from the filesystem, file 'b' was created and the delete
was recorded with 'hg rm --after'. This add is attempting to record the
existence of file 'b'.
A filesystem that is not case sensitive prevents dirstate.walk() from skipping
its step 3, and step 3 has the effect of inserting removed files into the walk
list. The Linux code doesn't run through step 3, and didn't exhibit the
problem. It's not clear why a non case sensitive filesystem triggers step 3,
given that the path normalization occurs in step 2.
Prior to 10697f29af2b, part of the check here was 'f not in repo.dirstate'
instead of 'f not in wctx'. Files in the 'r' state are filtered out of
context.__contains__() but not dirstate.__contains__(). Therefore the removed
file name wasn't added to the list of files to add when checking against
dirstate. That change was to allow removed files to be readded, but adding a
file that doesn't exist is nonsensical. If the user specifies a missing file,
it will be an exact match and will still fail.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 20 Nov 2014 22:33:40 -0500] rev 23390
tests: choose the proper environment variable style for the platform
Windows was printing out 'commit $HG_NODE' instead of the actual hash.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 20 Nov 2014 20:07:34 -0500] rev 23389
tests: fix another multi-statement hook for Windows
The double quotes are necessary, otherwise it tries to pipe into a program named
'short'. An '&' could serve as a command separator on Windows instead of ';',
but I don't see any obvious way to swap these depending on the platform. In
this case though, there really wasn't a need for multiple statements.
Matt Harbison <matt_harbison@yahoo.com> [Wed, 19 Nov 2014 23:41:40 -0500] rev 23388
run-tests: set a default largefiles usercache in the default hgrc file
This fixes a test failure introduced in 4be754832829 on Windows and OS X, where
the cached largefile wasn't being deleted because the named .cache directory
didn't exist. It only existed on Linux because the test suite sets $HOME to the
directory of the test being run, and Linux uses $HOME/.cache by default.
Most of the other largefiles tests explicitly set this value at the top of their
scripts, but test-largefiles-update.t didn't pick that up when it was created.
Those scripts that do set a value will override this.
We could just set the parameter in the test-largefiles-update.t script, but
there are a few other non obvious tests that exercise largefiles too. These
largefiles end up being cached in the user's real cache, so proper hygiene
dictates that this not be left to each individual test script.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 09:50:27 -0800] rev 23387
merge: remove obsolete check for untracked files in 'dm' action
Since 0776a6cababe (merge: don't use unknown(), 2012-02-09), untracked
files are no longer included in the manifest diff, so there is no need
to check exclude them when renaming files for directory moves with the
'dm' action.
Martin von Zweigbergk <martinvonz@google.com> [Sun, 23 Nov 2014 23:10:34 -0800] rev 23386
merge: remove dead assignment in applyupdates()
Martin von Zweigbergk <martinvonz@google.com> [Fri, 21 Nov 2014 13:06:04 -0800] rev 23385
merge: move calculateupdates() before applyupdated()
calculateupdates() happens before applyupdates(), so move it before in
the code. That also moves it close to manifestmerge(), which is a good
location as calculateupdates() is the only caller of manifestmerge().
Martin von Zweigbergk <martinvonz@google.com> [Mon, 24 Nov 2014 11:28:46 -0800] rev 23384
merge: remove unused variables from _checkcollision()
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Tue, 25 Nov 2014 18:37:28 +0900] rev 23383
largefiles: avoid exec-bit examination on the platform being unaware of it
Changeset 24600c9d7f4e introduced the examination of exec bit of
largefiles in "hg status --rev REV" case, but it doesn't avoid it on
the platform being unaware of exec-bit (e.g. on NTFS of Windows).
Matt Mackall <mpm@selenic.com> [Sat, 22 Nov 2014 17:09:04 -0600] rev 23382
merge with stable
Durham Goode <durham@fb.com> [Thu, 20 Nov 2014 16:30:57 -0800] rev 23381
changegroup: fix file linkrevs during reorders (issue4462)
Previously, if reorder was true during the creation of a changegroup bundle,
it was possible that the manifest and filelogs would be reordered such that the
resulting bundle filelog had a linkrev that pointed to a commit that was not
the earliest instance of the filelog revision. For example:
With commits:
0<-1<---3<-4
\ /
--2<---
if 2 and 3 added the same version of a file, if the manifests of 2 and 3 have
their order reversed, but the changelog did not, it could produce a filelog with
linkrevs 0<-3 instead of 0<-2, which meant if commit 3 was stripped, it would
delete that file data from the repository and commit 2 would be corrupt (as
would any future pulls that tried to build upon that version of the file).
The fix is to make the linkrev fixup smarter. Previously it considered the first
manifest that added a file to be the first commit that added that file, which is
not true. Now, for every file revision we add to the bundle we make sure we
attach it to the earliest applicable linkrev.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 20 Nov 2014 16:39:32 -0800] rev 23380
merge: consistently use single quotes for non-user-facing strings
Because I'm getting tired of searching for both 'O' and "O".
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 13 Nov 2014 11:12:47 +0000] rev 23379
localrepo: add a currenttransaction method
This method returnx the current transaction or None: it will allow a
cache writer to hook in an existing transaction.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 13 Nov 2014 11:11:17 +0000] rev 23378
repoview: extract actual hidden cache writing in its own function
This will allow the generation of this cache within the transaction. Relying on
the transaction will reduce the chance of reader seeing bad cache.
Anton Shestakov <engored@ya.ru> [Fri, 21 Nov 2014 13:58:49 +0800] rev 23377
templates: fix broken "less" & "more" links in paper style (issue4460)
"/search", which is an invalid command in hgweb, was mistakenly used for
"[show] more [revsets]" and "[show] less [revsets]" links on search page in
templates "paper" (and those which inherit paper, such as coal) before and
worked fine until 6e1fbcb18a75, which made hgweb more strict about invalid
commands.