tests: add 'set -x' to the .t sh scripts in run-tests.py debug mode This makes -d output much more readable when debugging the test framework or very strange test failures.

bookmarks: clarify help for -i/--inactive

revset: fix typo in message

merge default into stable for 2.1 code freeze

revset: add remote() predicate to lookup remote revisions

bookmarks: automatically advance bookmark on naked update (BC) (issue2894)

qimport: back out 2eec74d7ce95 This patch presumed mq csets must always be secret, which isn't yet established.

phases: only synchronize on common changeset when push fails If push failed we should not expect the pushed changeset to exist on remote. The common set before the push is used for phase related operation instead of common + missing. Note: * We still pull phase data even if push fails * We still try to push data even if push fails (same than bookmark)

discovery: diet discovery.prepush from non-discovery code The ``discovery.prepush`` function was doing multiple things not related to discovery. This changeset move some code into the ``localrepo.push`` method. The old ``discovery.prepush`` function jobs is now restricted to checking for multple head creation. It was then renamed ``discovery.checkheads``. This new ``discovery.checkheads`` function may receive several other changes in the future but we are a bit too much near the freeze for a wider refactoring.

qfinish: set all qfinished patch as draft, not only qbase Fix a silly bug.

largefiles: test and simplify empty directory removal in remove

tag: invalidate tag cache immediately after adding new tag (issue3210) New tags were written to .hgtags / .hglocaltags without updating or invalidating the localrepo cache. Before afd459933d5f a lock was acquired soon after the new tags had been written, and that invalidated the cache so the new tags for example could be seen in pretxncommit hooks. With afd459933d5f the lock had already been acquired at this point and the missing cache invalidation was exposed. The tag caches will now explicitly and immediately be invalidated when new tags are added.

mq: ensure mq changesets are set to secret when no phase data are found

mq: qimporting revision set them to secret

mq: have mq create secret changeset only

wireproto: refuse to lookup secret csets

qclone: ignore local qbase if secret

rebase: only advance phase on successful commit

phases: mechanism to allow extension to alter initial computation of phase This commit add a whennodata list where extension can register a callback to be called if no phase related data are found in the repository. The goal is to ensure the existing extension that move phase data in 2.1 can compute consistent phase boundary for existing repo.

qclone: add a few comment and blank line This help readability.

mq: turn changeset draft on qfinish (except if qparent is secret) As mq automatically sets changesets as secret, it should make them draft when he is done with it. We do not move them automatically to draft when we detect that something else have also set them as secret through their parents.

config: have a way to backup and restore value in config This is introduce to allow temporary overwriting of a config value while being able to reinstall the old value once done. The main advantage over using ``config`` and ``setconfig`` is that backup and restore will properly restore the lack of any config. Restoring the fact that there was no value is important to allow config user to keep using meaniful default value. A more naive approach will result in the following scenario:: Before: config(section, item, my_default) --> my_default temporal overwrite old = config(section, item) … setconfig(section, item, old) After config(section, item, my_default) --> None The first user of this feature should be mq to overwriting minimal phase of future commit.

graft: add test to check the phase of new changesets Graft actually do not keep the phase of the source changesets: no need to change the graft code and add test to check this behaviour.

rebase: fix phases movement Rebase now try to keep the phases of source changesets.

largefiles: cache new largefiles for new heads when pulling When the user pulls from a remote repository that is not his default repo, it is quite likely that he will pull a new head. This means that if he tries to merge or rebase with the other head, he will run into a problem becuase largefiles has no way of tracking where the remote repository for this other head is, so it cannot download the largefiles from this other remote repository. It will attempt to download them from its default remote repository, which will not yet contain the largefiles. This patch solves this problem by caching any new largefiles for all heads directly into the system cache at the time of the pull, so they are available later. This behavior is actually more in line with Mercurial's distributed nature, because pulling already implies we have a connection to the remote server, but merging or rebasing does not.

largefiles: remove unused lfutil.readhash()

largefiles: check if largefile could be found when archiving (issue3193)

largefiles: refactor lfutil.findfiles to be more logical

forget: fix subrepo recursion for explicit path handling When support for handling explicit paths in subrepos was added to the forget command (95174c381525), subrepo recursion wasn't taken into account. This change fixes that by pulling the majority of the logic of commands.forget into cmdutil.forget, which can then be called from both there and subrepo.forget.

add: fix subrepo recursion for explicit path handling When support for handling explicit paths in subrepos was added to the add command (9e99d2bbb1b1), subrepo recursion wasn't taken into account. This change adds an explicitonly argument to cmdutil.add to allow controlling which levels of recursion should include only explicit paths versus all matched paths.

tests: add subrepo recursion tests for add/forget with explicit paths When support for handling add/forget of explicit paths within subrepos was added (9e99d2bbb1b1/95174c381525), nested subrepos weren't handled properly. This change adds test coverage to expose the broken behavior, which will be fixed in later patches.

merge with stable

bookmarks: backout locking change in 12dea4d998ec Repo lock only applies to data in .hg/store/

changeset_printer: display changeset phase on debug level Backward compatibility make it hard to display it on higher level

phase: report phase movement When used in "set" mode, the phase command now display the number of changeset who changed phase.

largefiles: correctly handle newly added largefile on other side of merge

rebase: write series file without removed mq patches Rebase will remove empty changesets and will also completely remove the mq patch file for rebased empty patches. Starting with b28004513977 (1.9) it would preserve guards by writing the old series file back. That would however also reintroduce removed patch files in the series file and the inconsistency would make qpop + qpush fail. This patch backs out most of b28004513977 and makes sure guards are preserved without reintroducing removed patches.

revset: roots needs to be computed on full set

phases: use nodemap to check for missing nodes

repair: move phases code after invalidation code

largefiles: remove empty directories upon update (issue3202)

revset: optimize roots and children

revset: optimize building large lists in formatrevspec The large or-expressions we used to build required a substantial amount of subset filtering in orset() which was inefficient. Instead we build a single string which we process in one go with a special internal predicate.

hg-ssh: use shlex for shell-like parsing of SSH_ORIGINAL_COMMAND The Mercurial ssh protocol is defined as if it was ssh-ing to a shell account on an ordinary ssh server, and where hg was available in $PATH and it executed the command "hg -R REPOPATH serve --stdio". The Mercurial ssh client can in most cases just pass REPOPATH to the shell, but if it contains unsafe characters the client will have to quote it so the shell will pass the right -R value to hg. Correct quoting of repopaths was introduced in d8fa35c28335 and tweaked in 86fc364ca5f8. hg-ssh doesn't create the command via a shell and used a simple parser instead. It worked fine for simple paths without any quoting, but if any kind of quoting was used it failed to parse the command like the shell would do it. This makes hg-ssh behave more like a normal shell with hg in the path would do.

hooks: prioritize run order of hooks As of Mercurial 1.3, hooks are sorted in the order they are read into Mercurial. There are many instances when someone may want the hooks sorted in a specific order; this patch allows prioritizing hooks, while maintaining the existing enumeration for hooks without a priority.

merge with stable

merge: report all files in _checkunknown When doing hg up, if there is a file conflict with untracked files, currently only the first such conflict is reported. With this patch, all of them are listed. With this patch error message is now reported as a: untracked file differs b: untracked file differs abort: untracked files in working directory conflict with files in requested revision instead of abort: untracked file in working directory differs from file in requested revision: 'a' This is a follow up to an old attempt to do this here: http://selenic.com/pipermail/mercurial-devel/2011-August/033625.html

discovery: fix prepush documentation The prepush documentation claim that when we refuse to push, the second element of the returng tuple is an "outgoing" integer. value should be 0 when no outgoing changeset and 1 otherwise. In pratice if there are no outgoing changeset, "outgoing" value is alway 1 and util.Abort is raised on other error. the stable branch also include this error so it wasn't introduced by a recent refactoring.

phases: simplify phase exchange and movement over pushkey The code now only exchange draft root and only care about movement related to public//draft boundary. There is multiple reason to simplify this code: * Secret are never discovered anymore * We decided to not support more the three existing phase Removing phase index from pushkey (if ever decided) will be made in another commit.

phases: move phase according what was pushed not only what was added added This fix the lack phase movement when a locally secret changeset without added children was pushed to the repository. In such case, this changeset would be present in the bundle source, but not in the ``added`` variable.

revlog: make addgroup returns a list of node contained in the added source This list will contains any node see in the source, not only the added one. This is intended to allow phase to be move according what was pushed by client not only what was added.

phases: make secret changeset undiscoverable in all case This apply the redefined stronger semantic of secret. Secret changeset can still leak in various way. Those leak will need to be fixed individualy

phases: exclude secret when doing a local clone This is achieved by denying copy clone when any secret changeset exist.

bookmarks: primarily use repo lock, not wlock Bookmarks are repository data, not working directory data. Only the current bookmark is working directory data. Some lock shuffling is required to avoid lockout between the initial mock lock and locking of the localrepo instance that is created after copying.

localrepo: update branchcache in a more reliable way test-mq-cache.t did apparently look at stale cache content. Testing with different locking mechanism happened to update the cache more frequently and thus caused a test failure.

tests: make qnew in test-mq-caches.t stable The unstable hashes did for other reasons not show up in the test output.