peer: delete double definition of method peer

revset: fix the definition of "unstable changesets" for "unstable" predicate unstable-ness of changesets should be determined by obsolete-ness of not descendants but ancestors.

largefiles: support revsets for outgoing --large Previous to this, outgoing with a revset succeeded unless --large was also specified.

largefiles: fix a traceback introduced with recent peer changes Changeset 1ac628cd7113 broke 'outgoing --large' ... File "hgext\largefiles\lfutil.py", line 56, in findoutgoing remote.local(), force=force) File "mercurial\discovery.py", line 31, in findcommonincoming if not remote.capable('getbundle'): AttributeError: 'lfilesrepo' object has no attribute 'capable' This restores the previous functionality, though I'm not sure if there's a better way to do this- that changeset introduces a hunk in debugdiscovery that does this: if not util.safehasattr(remote, 'branches'): # enable in-client legacy support remote = localrepo.locallegacypeer(remote.local()) Is there a legacy support issue here too?

largefiles: support revsets for cat Previous to this, cat only accepted revsets if the largefiles extension was disabled.

largefiles: support revsets for revert Previous to this, revert only accepted revsets if the largefiles extension was disabled.

doc: unify section level between help topics Some help topics use "-" for the top level underlining section mark, but "-" is used also for the top level categorization in generated documents: "hg.1.html", for example. So, TOC in such documents contain "sections in each topics", too. This patch changes underlining section mark in some help topics to unify section level in generated documents. After this patching, levels of each section marks are: level0 """""" level1 ====== level2 ------ level3 ...... level4 ###### And use of section markers in each documents are: - mercurial/help/*.txt can use level1 or more (now these use level1 and level2) - help for core commands can use level2 or more (now these use no section marker) - descriptions of extensions can use level2 or more (now hgext/acl uses level2) - help for commands defined in extension can use level4 or more (now "convert" of hgext/convert uses level4) "Level0" is used as top level categorization only in "doc/hg.1.txt" and the intermediate file generated by "doc/gendoc.py", so end users don't see it in "hg help" outoput and so on.

addremove: mention --similarity defaults to 100 (issue3430)

revset: polish explanation of the difference between file() and filelog()

strip: move bookmarks to nearest ancestor rather than '.' If you've got this graph: 0-1-2 \ 3 and 3 is checked out, 2 is bookmarked with "broken", and you do "hg strip 2", the bookmark will move to 3, not 1. That's always struck me as a bug. This change makes bookmarks move to the tipmost ancestor of the stripped set rather than the currently-checked-out revision, which is what I always expected should happen.

largefiles: fix exception hack for i18n (issue3197) Properly fixing this is quite a bit trickier.

merge with crew

webcommands: do not modify repo.tagslist() Repeatedly refreshing a gitweb summary page served by hg serve would show the tags list switching between two different sequences.

tag: don't allow tagging the null revision (issue1915) Also fixed the tests that were doing this and expected it to work

i18n: add/relocate "i18n keyword" comments for i18n messages in revset.py

revset: use appropriate predicate name in error messages "extinct" and "unstable" predicates use "obsolete" implementation internally, but own predicate name should be used in error messages of them instead of "obsolete".

test-histedit-fold: fix for Windows Fixes 336121088ef1 failing with MSYS. MSYS sh.exe mangled that path by applying its path magic, which caused the test to fail on Windows.

tags: visit new heads in forward order when rebuilding cache This improves performance of building the tag cache by 4x on a repo with ~2800 heads.

identity: show trailing '+' for dirty subrepos (issue2839)

discovery: fix invalid comment about extinct being ignored

obsolete: fix decoding error message arguments

push: do not try to push remote obsolete if local has none

help: fix some instances of 'the the'

pager: work around bug in python 2.4's subprocess module (issue3533) hg v2.2.2 fixed the pager on Windows, but broke it on Python 2.4. This patch only uses the new behavior if Python >= 2.5 is detected.

clone: copy obsolete markers during local clone This change adds `obsstore` to the list of files copied by local clone, until now changesets were copied without their obsolete markers. Note: extinct changesets were and are still included by such clones to enable hardlinking. There is no obvious reason to prevent their exchange here. Rebased by Patrick Mezard <patrick@mezard.eu>

discovery: add extinct changesets to outgoing.excluded Before this change, push would incorrectly fast-path the bundle generation when extinct changesets are involved, because they are not added to outgoing.excluded. The reason to do so are related to outgoing.excluded being assumed to contain only secret changesets by scmutil.nochangesfound(), when displaying warnings like: changes found (ignored 9 secret changesets) Still, outgoing.excluded seems like a good API to report the extinct changesets instead of dedicated code and nothing in the docstring indicates it to be bound to secret changesets. This patch adds extinct changesets to outgoing.excluded and fixes scmutil.nochangesfound() to filter the excluded node list. Original version and test by Pierre-Yves.David@ens-lyon.org

convert/svn: handle non-local svn destination paths (issue3142) test-convert-svn-sink.t still pass and I tested pushing to an svn+ssh repository

setup: fix build_hgexe for mingw32 compiler Fixes python setup.py build_hgexe -i --compiler=mingw32

largefiles: fix path handling for cp/mv (issue3516) Previously, a copy or a move of a largefile only worked if the cwd was the root of the repository. The first issue was that the destination path passed to os.mkdirs() chopped the absolute path to the standin after '.hglf/', which essentially created a path relative to the repository root. Similarly, the second issue was that the source and dest paths for copyfile() were relative to the repo root. This converts these three paths to absolute paths. Some notable issues, regardless of the directory in which the cp/mv is executed: 1) The copy is not being recorded in lfdirstate, but it is in dirstate for the standins. I'm not sure if this is by design (i.e. minimal info in lfdirstate). 2) status -C doesn't behave as expected. Using the testcase as an example: # after mv + ci $ hg status -C -v --rev '.^' # expected to see 'A' and ' ' lines too R dira\dirb\largefile $ hg status -C -v --rev '.^' foo/largefile # no output # expected to see 'A' and ' ' lines only $ hg status -C -v --rev '.^' foo/ # no output # expected to see 'A', ' ' and 'R' lines $ hg status -C -v --rev '.^' ./ # expected to see 'A' and ' ' lines too R dirb\largefile $ hg status -C -v --rev '.^' ../.hglf/dira/foo/largefile A ..\.hglf\dira\foo\largefile ..\.hglf\dira\dirb\largefile # no 'R' expected when new file is specified $ hg status -C -v --rev '.^' ../.hglf # OK A ..\.hglf\dira\foo\largefile ..\.hglf\dira\dirb\largefile R ..\.hglf\dira\dirb\largefile

revset: add explanation about difference between 'filelog()' and 'file()'

hgweb: improve colors for comparison page delete: red -> red insert: green -> yellow change: yellow -> gray

histedit: fix new nodes computation with --continue (issue3534) When running the following actions: pick 617f94f13c0f 1 +4 drop 888f9082bf99 2 +5 fold 251d831eeec5 3 +6 if the fold fails, is fixed by the user with a new changeset, --continue will ignore the new revision when generating the fold changelog. This was caused by --continue detecting new changesets as descendants of the parent not descendants of changesets in the initial list. In this case, dropped changesets must be ignored. Even with the computation fixed, the 'newchildren' list was always emptied by the filtering loop and passed empty to finishfold(). Note that changesets dropped and recreated identically will still be missed. This probably cannot be solved but is unlikely to happen. Other things, like 'newchildren' having multiple heads, should be checked as well.

histedit: end folding message with an LF This is convenient when running tests dumping the editor content, it avoids the following output line to be mixed with histedit message.

merge with i18n

i18n-sv: synchronized with d1b49b02bc16

merge with crew-stable

util: delegate seek and tell methods of atomictempfile

encoding: add fast-path for ASCII uppercase. This copies the performance hack from encoding.lower (c481761033bd). The case-folding logic that kicks in on case-insensitive filesystems hits encoding.upper hard: with a repository with 75k files, the timings went from hg perfstatus ! wall 3.156000 comb 3.156250 user 1.625000 sys 1.531250 (best of 3) to hg perfstatus ! wall 2.390000 comb 2.390625 user 1.078125 sys 1.312500 (best of 5) This is a 24% decrease. For comparison, Mercurial 2.0 gives: hg perfstatus ! wall 2.172000 comb 2.171875 user 0.984375 sys 1.187500 (best of 5) so we're only 10% slower than before we added the extra case-folding logic. The same decrease is seen when executing 'hg status' as normal, where we go from: hg status --time time: real 4.322 secs (user 2.219+0.000 sys 2.094+0.000) to hg status --time time: real 3.307 secs (user 1.750+0.000 sys 1.547+0.000)

encoding: use s.decode to trigger UnicodeDecodeError When calling encode on a str, the string is first decoded using the default encoding and then encoded. So s.encode('ascii') == s.decode().encode('ascii') We don't care about the encode step here -- we're just after the UnicodeDecodeError raised by decode if it finds a non-ASCII character. This way is also marginally faster since it saves the construction of the extra str object.

test-largefiles: fix test failing on vfat file systems The usercache hardlinks files for filesystems that support hardlinks. So when this test is run on a filesystem that supports hardlinking, we have a link in r7 and in the usercache, pointing to the same file contents (4cdac4d8...). vfat does not support hardlinks, the file in the cache and in the store of r7 are thus independent. For the test to pass on vfat, we need to corrupt *both* the largefile in the usercache and in the store of r7. Corrupting only one of them is not sufficient. Fixes: --- /home/buildslave/mercurial/vfat_hg_tests__stable_/build/tests/test-largefiles.t +++ /home/buildslave/mercurial/vfat_hg_tests__stable_/build/tests/test-largefiles.t.err @@ -997,9 +997,11 @@ $ hg push -R r7 http://localhost:$HGPORT1 pushing to http://localhost:$HGPORT1/ searching for changes - remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash - abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/ (glob) - [255] + searching for changes + remote: adding changesets + remote: adding manifests + remote: adding file changes + remote: added 2 changesets with 2 changes to 2 files $ rm -rf empty Push a largefiles repository to a served empty repository

largefiles: mark as a first party extension

largefiles: ensure addlargefiles() doesn't add a standin as a largefile An easy way to force this (and cause a traceback) prior to the fix for 3507 was $ touch large $ hg add --large large $ hg ci -m "add" $ hg remove large $ touch large $ hg addremove --config largefiles.patterns=**large This patch also detected (and corrected) a previous test where a standin got added as a largefile (without a traceback).

largefiles: fix a traceback when addremove follows a remove (issue3507) The problem only occurred if a file was removed with 'hg rm' (as opposed to the OS utilities), and then addremove was run before a commit. Both normal and large files were affected. Ensuring that the file exists prior to an lstat() for size seems like the Right Thing. But oddly enough, the missing file that was causing lstat() to blow up was a standin when a largefile was removed, which seems fishy, because a standin should never be added as a largefile. I was then able to get a standin added as a largefile (whose name is 'large') with hg addremove --config largefiles.patterns=**large which also causes a backtrace. That will be fixed next.

largefiles: defer lfdirstate.drop() until after commit (issue3364) The example in comment #9 of the bug writeup must be run exactly- it was the commit after the rm and prior to the addremove that screwed things up, because that commit noticed that the largefile was missing, called drop(), and then the original commit function did nothing (due to the file in the '!' state). The addremove command properly put it into the 'R' state, but it remained stuck in that state (because commit insisted 'nothing changed'). Without the commit prior to addremove, the problem didn't occur. Maybe this is an indication that lfdirstate needs to take a few more hints from the regular dirstate, regardless of what _it_ thinks the state is- similar inconsistency is probably still possible with this patch if the original commit succeeds but the lfdirstate write fails.

largefiles: fix addremove with -R option If a file was missing, the missing list contained a path relative to the repo. When building the matcher from that list, the file name ended up concatenated to cwd, causing the command to abort with '<file> not under root'. This rebuilds the missing list with paths relative to cwd.

dispatch: fix traceback when extension was tested with newer versions only The "worst" extension still is the one tested with the lowest tested version below the current version of Mercurial, but if an extension with was only tested with newer versions, it is considered a candidate for a bad extension, too. In this case extensions which have been tested with higher versions of Mercurial are considered better. This allows finding the oldest extension if ct can't be calculated correctly and therefore defaults to an empty tuple, and it involves less changes to the comparison logic during the current code freeze.

test-extension.t: use fixed version string instead of current tag Currently tests break with the current tag being 2.3-rc and tags set by the user could affect this test, too.

Added tag 2.3-rc for changeset a06e2681dd17

merge default into stable for 2.3 code freeze

merge with crew

merge with stable

windows: removed duplicate termwidth definition Changeset dbf91976f900 caused this when the "from win32 import *" line was replaced with explicit import statements: the wildcard import was at the bottom of the file and so windows.termwidth was overwritten by win32.termwidth as indented, but the new explicit import statements were at the top and so win32.termwidth got lost. With the switch to ctypes, win32 can always be imported and so the fallback termwidth in windows is no longer needed.

httprepo: ensure Content-Type header exists when pushing data Otherwise the wireprotocol just hangs while trying to send data. (And nothing is received at the other side)

obsolete: obsstore.add now takes a list of markers. This allow efficient IO and it greatly simplify the merging of markers.

obsolete: refactor writemarkers to only encode them The function is now able to write the version header as necessary. The function now yield bytes to be written to a stream. This should ease later use of this function for wireprotocol based exchanged. Prepare the public use of the writemarker by wireprotocol function.

update: put rules for uncommitted changes into verbose help section

hooks: print out more information when loading a python hook fails When loading a python hook with file syntax fails, there is no information that this happened while loading a hook. When the python file does not exist even the file name is not printed. (Only that a file is missing.) This patch adds this information and a test for loading a non existing file and a directory not being a python module.

perf: fix perfcca to work with new casecollisionauditor interface A recent changeset, afd75476939e, modified the caescollisionauditor interface but did not update perf.py. This changeset remidies that.

checkheads: extract branchmap preprocessing The checkheads function is far too complicated. This extract help to explicite what part of the preprocessing are reused by the actual check. This the first step toward a wider refactoring.

checkheads: take future obsoleted heads into account If we push some successors they will likely create a new head on remote. However as the obsoleted head will disappear after the push we are not really increasing the number of heads. There is several case which will lead to extra being actually pushed. But this first changeset aims to be simple. See the inline comment for details. Without this change, you need to push --force every time you want to push a newer version which is very error prone. The remote side still display +n heads on unbundle because it does not have the obsolete marker at unbundle time.

obsolete: add an any successors function This function yield every nodes which succeed to a group of nodes. The first user will be checkheads who need to know if we push successors for remote extra heads.

checkheads: extract bookmark computation from the branch loop No branch specific data are used in the computation of the bookmarked heads. We can only compute it once.

checkheads: simplify the structure build by preprocessing All useful data are now gathered in a single dictionnary. `branchmapsummary` is renamed to `headssummary` and its return value is greatly simplified.

_updatebranchcache: prevent deleting dict key during iteration We use dict.keys() to fetch all keys before starting to delete some. Otherwise python complains that the dictionnary is altered during iteration.

checkheads: extract branchmap preprocessing The checkheads function is far too complicated. This extract help to explicite what part of the preprocessing are reused by the actual check. This the first step toward a wider refactoring.

obsolete: mark unreachable extinct changesets as hidden The repo.hiddenrevs set is updated with all extinct() changesets which aren't descendants of either: - the current working copy, - a bookmark, - a tag.

hidden: move hiddenrevs set on the repository This set is always accessed through the repo for now. Having this set carried by the changelog make it complicated to: - initialize it, computing hidden set may involve revset call - lazy compute it, (1) only the changelog can detect someone access it, (2) only the repo have enought knowledge to compute it. In later version I expect he changelog to apply filtering itself and the set to be carried by changelog again.

obsolete: do not exchange extinct changesets Extinct changesets are excluded from all exchange operations. This is a silent exclusion because the user should not need to be aware of them. There is no reason to strongly enforce this exclusion except implementation simplicity. User should be able to explicitly request an extinct changeset in the future.

repo: move visibleheads and visiblebranchmap logic in discovery They were previously inside the mercurial.phases module, but obsolete logic will need them to exclude `extinct` changesets from pull and push. The proper and planned way to implement such filtering is still to apply a changelog level filtering. But we are far to late in the cycle to implement and push such a critical piece of code (changelog filtering). With Matt Mackall approval I'm extending this quick and dirty mechanism for obsolete purpose. Changelog level filtering should come during the next release cycle.

localpeer: return only visible heads and branchmap Now that we have localpeer, we can apply filtering on heads and branchmap the same way it's done for wireprotocol peer.

util, posix: eliminate encodinglower and encodingupper 2ebe3d0ce91d claims this was needed "to avoid cyclic dependency", but there is no cyclic dependency. windows.py already imports encoding, posix.py can import it too, so we can simply use encoding.upper in windows.py and in posix.py. (this is a partial backout of 2ebe3d0ce91d)

hgweb: side-by-side comparison functionality Adds new web command to the core, ``comparison``, which enables colorful side-by-side change display, which for some might be much easier to work with than the standard line diff output. The idea how to implement comes from the SonicHq extension. The web interface gets a new link to call the comparison functionality. It lets users configure the amount of context lines around change blocks, or to show full files - check help (also in this changeset) for details and defaults. The setting in hgrc can be overridden by adding ``context=<value>`` to the request query string. The comparison creates addressable lines, so as to enable sharing links to specific lines, just as standard diff does. Incorporates updates to all web related styles. Known limitations: * the column diff is done against the first parent, just as the standard diff * this change allows examining diffs for single files only (as I am not sure if examining the whole changeset in this way would be helpful) * syntax highlighting of the output changes is not performed (enabling the highlight extension has no influence on it)

scmutil: 25% speedup in casecollisionauditor On a large repository, switching casecollisionauditor to lowercasing all file names at once rather than one at a time improves hg-add time by 25%.

obsolete: os.SEEK_END first appeared in Python 2.5 fixes 48c232873a54 failing for Python 2.4

tests: convert a push test to use revsets

outgoing: accept revset argument for --rev There may be a more generic way that would add revset support to more commands by adding revset support to addbranchrevs(), but given the proximity of the next code freeze, a minimal change seems like the better choice.

dirstate: drop assert

dirstate: eliminate redundant check parameter on _addpath() state == 'a' implies check I fail to see what the point of this check parameter is. Near as I can see, the only _addpath call where it was set to True was in add(), but there, state is 'a'. This is a follow-up to c2016bae3b97.

obsolete: add seek to end of file before calling tell (issue3543)

peer: remove cancopy from peer api; use directly on repo instead

peer: introduce canpush and improve error message

peer: introduce real peer classes This change separates peer implementations from the repository implementation. localpeer currently is a simple pass-through to localrepository, except for legacy calls, which have already been removed from localpeer. This ensures that the local client code only uses the most modern peer API when talking to local repos. Peers have a .local() method which returns either None or the underlying localrepository (or descendant thereof). Repos have a .peer() method to return a freshly constructed localpeer. The latter is used by hg.peer(), and also to allow folks to pass either a peer or a repo to some generic helper methods. We might want to get rid of .peer() eventually. The only user of locallegacypeer is debugdiscovery, which uses it to pose as a pre-setdiscovery client. But we decided to leave the old API defined in locallegacypeer for clarity and maybe for other uses in the future. It might be nice to actually define the peer API directly in peer.py as stub methods. One problem there is, however, that localpeer implements lock/addchangegroup, whereas the true remote peers implement unbundle. It might be desireable to get rid of this distinction eventually.

peer: introduce peer methods to prepare for peer classes This introduces a peer method into all repository classes, which currently simply returns self. It also changes hg.repository so it now raises an exception if the supplied paths does not resolve to a localrepo or descendant. Finally, all call sites are changed to use the peer and local methods as appropriate, where peer is used whenever the code is dealing with a remote repository (even if it's on local disk).

bookmarks: document behavior of -B/--bookmark in help

test-bookmarks-pushpull.t: verify correct push -B behavior I wasn't able to find a test that proved this behavior worked, so I felt obligated to write a quick test so it won't regress in the future.

debugrevlog: handle numrevs == numfull case (issue3537) Instead of tracing back with a ZeroDivisionError.

templatekw/help: document the {parents} keyword The {parents} keyword does not appear in the generated documentation for templates because it is added by `changeset_templater` (and this is because its behavior depends on `ui`, so it can't be defined as a normal template keyword; see comments in `changeset_templater._show()`). Add it to the documentation synthetically by creating a stub documentation function. Test plan: built the docs and examined the man page to verify that this keyword is now documented. I'm not sure how to test the i18n extraction part, but assume it will just work given that this patch doesn't do anything too crazy.

revset: add destination() predicate This predicate is used to find csets that were created because of a graft, transplant or rebase --keep. An optional revset can be supplied, in which case the result will be limited to those copies which specified one of the revs as the source for the command. hg log -r destination() # csets copied from anywhere hg log -r destination(branch(default)) # all csets copied from default hg log -r origin(x) or destination(origin(x)) # all instances of x This predicate will follow a cset through different types of copies. Given a repo with a cset 'S' that is grafted to create G(S), which itself is transplanted to become T(G(S)): o-S / o-o-G(S) \ o-T(G(S)) hg log -r destination( S ) # { G(S), T(G(S)) } hg log -r destination( G(S) ) # { T(G(S)) } The implementation differences between the three different copy commands (see the origin() predicate) are not intentionally exposed, however if the transplant was a graft instead: hg log -r destination( G(S) ) # {} because the 'extra' field in G(G(S)) is S, not G(S). The implementation cannot correct this by following sources before G(S) and then select the csets that reference those sources because the cset provided to the predicate would also end up selected. If there were more than two copies, sources of the argument would also get selected. Note that the convert extension does not currently update the 'extra' map in its destination csets, and therefore copies made prior to the convert will be missing from the resulting set. Instead of the loop over 'subset', the following almost works, but does not select a transplant of a transplant. That is, 'destination(S)' will only select T(S). dests = set([r for r in subset if _getrevsource(repo, r) in args])

revset: add origin() predicate This predicate is used to find the original source of csets created by a graft, transplant or rebase --keep. If a copied cset is itself copied, only the source of the original copy is selected. hg log -r origin() # all src csets, anywhere hg log -r origin(branch(default)) # all srcs of copies on default By following through different types of copy commands and only selecting the original cset, the implementation differences between the copy commands are hidden. (A graft of a graft preserves the original source in its 'extra' map, while transplant and rebase use the immediate source specified for the command). Given a repo with a cset S that is grafted to create G(S), which itself is grafted to become G(G(S)) o-S / o-o-G(S) \ o-G(G(S)) hg log -r origin( G(S) ) # { S } hg log -r origin( G(G(S)) ) # { S }, NOT { G(S) } Even if the last graft were a transplant hg log -r origin( T(G(S)) ) # { S } A rebase without --keep essentially strips the source, so providing the cset that results to this predicate will yield an empty set. Note that the convert extension does not currently update the 'extra' map in its destination csets, and therefore copies made prior to the convert will be unable to find their source.

convert: remove unused newnames variable in filemap

push: fix bug in detection of remote obsolete support Current code check obsolete availability in local repo.

incoming/outgoing: handle --graph in core

log: support --graph without graphlog extension The glog command is preserved in the extension for backward compatibility.

graphlog: extract revset/support functions into cmdutil

graphlog: extract ascii drawing code into graphmod

patchbomb: rewrite getoutgoing() with revsets Another version could have returned a revset expression from getoutgoing(), but we do not know how many times it will be resolved, so better do it once explicitely.

patchbomb: support --outgoing and revsets With --outgoing, input revisions were passed to getoutgoing() before being resolved.

patchbomb: make --outgoing ignore secret changesets getoutgoing() is just rewritten almost like revset.outgoing(), a follow-up will make it use revsets after the tests are adjusted.

merge with stable

convert: make filemap renames consistently override revision renames When the source repository had a revision renaming "$new -> $old", but the filemap a "$old -> $new" rename, the converted revision could use either $new (deleting the file) or $old (keeping the file) when getting the file data, depending on the lexicographical order of those names. So the resulting revision would leave some files untouched (as expected), but delete others arbitrarely.

obsolete: compute extinct changesets `extinct` changesets are obsolete changesets with obsolete descendants only. They are of no interest anymore and can be: - exclude from exchange - hidden to the user in most situation - safely garbage collected This changeset just allows mercurial to detect them. The implementation is a bit naive, as for unstable changesets. We better use a simple revset query and a cache, but simple version comes first.

push: refuse to push unstable changesets without force User should resolve unstability locally before pushing the same way we encourage user to merge locally instead of pushing a new remote head. If we are to push obsolete changeset, at least one set of the pushed set will be either obsolete or unstable. The check is narrowed to only heads.

obsolete: compute unstable changeset An unstable changeset is a changeset *not* obsolete but with some obsolete ancestors. The current logic to decide if a changeset is unstable is naive and very inefficient. A better solution is to compute the set of unstable changeset with a simple revset and to cache the result. But this require cache invalidation logic. Simpler version goes first.

revset: add an `obsolete` symbol This predicate matches obsolete changesets. This is a naive implementation to be improved later.

push: refuse to push obsolete changesets This is a first version. Simple but not very efficient. Note that this changeset introduce the "obsolete" word in the UI.

push: accept revset argument for --rev

check-code: recognise %= as an operator

tests: do exclude what is expected

parsers.c: remove warning: 'size' may be used uninitialized in this function Some compilers / compiler options (such as gcc 4.7) would emit warnings: mercurial/parsers.c: In function 'pack_dirstate': mercurial/parsers.c:306:18: warning: 'size' may be used uninitialized in this function [-Wmaybe-uninitialized] mercurial/parsers.c:306:12: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] It is apparently not smart enough to figure out how the 'err' arithmetics makes sure that it can't happen. 'err' is now replaced with simple checks and goto. That might also help the optimizer when it is inlining getintat().

graphlog: remove unused ASCIIDATA constant It was introduced by d9acbe7b0049, returned by asciiformat() but never read anywhere. 20140c249e63 stopped using it completely, and the graphmod.CHANGESET type is passed through all functions.

graphlog: make functions private, fix names

graphlog: remove unused get_revs() function

localrepo: use file API via vfs while ensuring repository directory As a part of migration to vfs, this patch invokes some file API indirectly via vfs, while ensuring repository directory in the constructor of "localrepository" class. New file API are added to "scmutil.abstractopener" class, because they are also used via other derived classes than "scmutil.opener". But "join()" is not yet defined other than "scmutil.opener" class, because it should not be used via other opener classes yet.

localrepo: use "vfs" intead of "opener" while ensuring repository directory As a part of migration to vfs, this patch uses "self.vfs" instead of "self.opener", while ensuring repository directory in the constructor of "localrepository" class.

localrepo: use the path relative to "self.vfs" instead of "path" argument As a part of migration to vfs, this patch uses "self.root", which can be recognized as the path relative to "self.vfs", instead of "path" argument. This fix allows to make invocations of "util.makedirs()" and "os.path.exists()" while ensuring repository directory in "localrepository.__init__()" ones indirectly via vfs. But this fix also raises issue 2528: "hg clone" with empty destination. "path" argument is empty in many cases, so this issue can't be fixed in the view of "localrepository.__init__()". Before this patch, it is fixed by empty-ness check ("not name") of exception handler in "util.makedirs()". try: os.mkdir(name) except OSError, err: if err.errno == errno.EEXIST: return if err.errno != errno.ENOENT or not name: raise This requires "localrepository.__init__()" to invoke "util.makedirs()" with "path" instead of "self.root", because empty "path" is treated as "current directory" and "self.root" becomes valid path. But "hg clone" with empty destination can be detected also in "hg.clone()" before "localrepository.__init__()" invocation, so this patch re-fixes issue2528 by checking it in "hg.clone()".

localrepo: use "self.wvfs.join()" instead of "os.path.join()" As a part of migration to vfs, this patch uses "self.wvfs.join()" instead of "os.path.join()", while initialization of fields in the constructor of "localrepository" class.

localrepo: use path expansion API via vfs As a part of migration to vfs, this patch moves path expansion API invocations in the constructor of "localrepository" to the constructor of "opener", because the root path to the repository is very important to handle paths using non-ASCII characters correctly. This patch also rearrange initialization order of "wvfs" field, because it is required to initialize "self.root".

localrepo: add "vfs" fields to "localrepository" for migration from "opener" As a part of migration to vfs, this patch adds "vfs" fields to "localrepository" class. This allows new codes to access current "opener" objects related to repositories via "vfs" fields, so patches referring to "vfs" will replace referring to "opener" in time. This patch also adds initializations for "vfs" fields to "statichttprepository" class derived from it, because its constructor doesn't invoke the constructor of "localrepository", so "vfs" fields should be initialized explicitly as same as "opener" fields: it has no working directory, so "wvfs" field is not added.

largefiles: optimize status by synchronizing lfdirstate with the largefile on update This speeds up status on a largefiles repo by synchronizing the largefiles dirstate to the largefile's mtime upon update, preventing the files from coming back as "unsure" later, requiring a check of the SHA1 sum.

store: abstract out how we retrieve a file's size

mq: check subrepo synchronizations against parent of workdir or other appropriate context Before this patch, MQ checks each subrepo synchronizations against the working directory context, so ".hgsubstate" updating is not imported into MQ revision correctly in cases below: - qrefresh when current ".hgsubstate" is already synchronized with each subrepos: you can reproduce this easily by just twice or more qrefresh invocations - qnew just after rollback of commit which updates ".hgsubstate" This patch resolves this by checking subrepo states against: - the parent of "qtop" for qrefresh, or - the parent of working context otherwise

mq: create patch file after commit to import diff of ".hgsubstate" at qrefresh Even though the committed revision contains diff of ".hgsubstate", the patch file created by qrefresh doesn't contain it, because: - ".hgsubstate" is not listed up as one of target files of the patch for reasons below, so diff of ".hgsubstate" is not imported into patch file - status of ".hgsubstate" in working directory is usually "clean" - ".hgsubstate" is not specified explicitly by users - the patch file is created before commit processing which updates or creates ".hgsubstate" automatically, so there is no diff for it at that time This patch resolves this problem by: - putting ".hgsubstate" into target list of the patch, if needed: this allows "patch.diff()" to import diff of ".hgsubstate" into patch file. - creating the patch file after commit processing: this updates ".hgsubstate" before "patch.diff()" invocation. For the former fixing, this patch introduces "putsubstate2changes()" to share same implementation with qnew. This is invoked only once per qnew/qrefresh at most, so there is less performance impact. This patch also omits "match" argument for "patch.diff()" invocation, because "patch.diff()" ignores "match" if "changes" is specified.

mq: add ".hgsubstate" to patch target list only if it is not listed up yet If ".hgsubstate" is already listed up as one of commit targets, qnew put diff of ".hgsubstate" twice into the patch file stored under ".hg/patches". It causes rejections at applying such patches. Other than the case like in added test script, this can also occur when qnew is executed just after rolling back the committing updated ".hgsubstate". This patch checks whether ".hgsubstate" is already listed up as one of commit targets, and put it into the appropriate list only if it is not listed up yet.

backout e7167007c083 This may have allowed unbounded I/O sizes with the current chunk retrieval code.

merge with crew-stable

revert: use term "uncommitted merge" in help text to make sure users can't possibly be mislead to try this for canceling a *merge changeset*.

histedit: use cmdutil.command decorator

hgweb: show help with verbose sections included This makes sure we see the same help info as with 'hg help <command> --verbose' on the command line, that is, with verbose sections included.

merge with crew-stable

update: mention how update can be used to cancel an uncommitted merge

update: move help text about parent revision higher up emphasizing how important the parent revision is

rollback: move examples and --force note in help into verbose section Plain 'hg help rollback' now looks like this: $ hg help rollback hg rollback roll back the last transaction (dangerous) This command should be used with care. There is only one level of rollback, and there is no way to undo a rollback. It will also restore the dirstate at the time of the last transaction, losing any dirstate changes since that time. This command does not alter the working directory. Transactions are used to encapsulate the effects of all commands that create new changesets or propagate existing changesets into a repository. This command is not intended for use on public repositories. Once changes are visible for pull by other users, rolling a transaction back locally is ineffective (someone else may already have pulled the changes). Furthermore, a race is possible with readers of the repository; for example an in-progress pull from the repository may fail if a rollback is performed. Returns 0 on success, 1 if no rollback data is available. options: -n --dry-run do not perform actions, just print output -f --force ignore safety measures --mq operate on patch repository use "hg -v help rollback" to show more info

rollback: split off command example paragraph in help

subrepo: add missing newline in Git warning message

merge with main

Merge

localrepo: make requirements and openerreqs mutable by subclasses This is necessary for extensions that need to modify a repo's requirements.

test-clone: load extensions before doing anything This makes it possible to run this test using "--extra-config-opt=extensions.myext=" and have the extension be loaded as intended.

test-clone: load extensions before doing anything This makes it possible to run this test using "--extra-config-opt=extensions.myext=" and have the extension be loaded as intended.

revlog: fix for generaldelta distance calculation The decision whether or not to store a full snapshot instead of a delta is done based on the distance value calculated in _addrevision.builddelta(rev). This calculation traditionally used the fact of deltas only using the previous revision as base. Generaldelta mechanism is changing this, yet the calculation still assumes that current-offset minus chainbase-offset equals chain-length. This appears to be wrong. This patch corrects the calculation by means of using the chainlength function if Generaldelta is used.

Merge

tests: reduce spurious failures when run with generaldelta Quite a few tests fail in noisy but meaningless ways when the test suite is run with generaldelta enabled: ./run-tests.py --extra-config-opt=format.generaldelta=1 This reduces the amount of noise introduced by the debugindex command, the main source of differences. In my environment, when testing with generaldelta enabled, this change reduces the number of completely failing tests from 21 to 8.

histedit: add extension docstring from external README Made a couple of tweaks to try and fit better with the hg docstring style and fix up some ReST errors in the README.

histedit: don't crash if the result of fixing up a fold is empty

histedit: replace hexshort lambda with node.short

revlog: make compress a method This allows an extension to optionally use a new compression type based on the options applied by the repo to the revlog's opener. (decompress doesn't need the same treatment, as it can be replaced using extensions.wrapfunction, and can figure out which compression algorithm is in use based on the first byte of the compressed payload.)

largefiles: batch statlfile requests when pushing a largefiles repo (issue3386) This implements a part of issue 3386. It batches the request for the status of all largefiles in the revisions that are about to be pushed into a single request, instead of doing N separate requests. In a real world test case, this change was verified to save 1,116 round-trips to the server. It only requires a client-side change; it is backwards-compatible with an older version of the server.

obsolete: write obsolete marker inside a transaction Marker are now written as soon as possible but within a transaction. Using a transaction ensure a proper behavior on error and rollback compatibility. Flush logic are not necessary anymore and are dropped from lock release. With this changeset, the obsstore is open, written and closed for every single added marker. This is expected to be highly inefficient and batched write should be implemented "quickly". Another issue is that every flush of the file will invalidate the obsstore filecache and trigger a full re instantiation of the repo.obsstore attribute (including, reading and parsing entry). This is also expected to be highly inefficient and proper filecache operation should be implemented "quickly" too. A side benefit of the filecache issue is that repo.obsstore object is properly invalidated on transaction abortion.

obsolete: append new markers to obsstore file instead of rewriting everything This is the second step toward incremental writing of marker inside a transaction. The obsstore file is now handled append only. Header writing have been extracted from _writemarkers. Because the _writemarkers method have been dropped, the push code directly reuse the serialised content of local repo `listkeys`. This is not very pretty, but this part of the protocol still need major improvement anyway.

obsolete: move obsolete markers read/write logic to obsstore object This is the first step toward incremental writing of obsolete marker within a transaction. For this purpose, obsstore is now given its repo sopener. This make it able to handles read and write to the obsstore file itself. Most IO logic is removed from localrepo and handled by obsstore object directly.

debugobsolete: remove spurious ctx from variable name 'contexts' are objects like the ones described in context.py, not anything that describes a situation.

Merge

setup: disable -mno-cygwin if building under mingw32 This gcc option has been deprecated since at least 2009 (gcc 4.4), and it causes compilations to fail entirely with gcc 4.6.x. Upstream distutils bug: http://bugs.python.org/issue12641

graphlog: don't truncate template value at last \n Most uses of templates requires a trailing newline to get vertical output. Graphlog with a template without trailing newline did however not just create horisontal output like other commands would but truncated the output at the last \n. Template values without any \n were ignored completely. Graphlog will now only eat one trailing newline before it lets the flow of the graph add the necessary vertical space.

graphlog: display obsolete changeset as "x" Changeset detected as obsolete will be displayed as "x" instead of 'o': o new rewritten changeset | | x old obsolete changeset |/ | o base This will be useful even when some obsolete changeset will be "hidden" because not all obsolete changeset can be hidden. If an obsolete changeset have non-obsolete descendant we can't simply hide it. And having a clear visual hint that the changeset is obsolete is useful. The main reason to make this minor change right now is to: 1) introduce an officiel user of the `ctx.obsolete()` method that will detect breakage earlier than third party code (mutable, hgview) 2) Do not display any vocabulary related to obsolete. Such vocabulary will require discussion.

obsolete: fix context.obsolete() method - obsstore attribut name changed. - public changeset can't be obsolete

obsolete: fix error message at marker creation precursors content where printed for invalid successor.

help: explain effect of .hgignore on tracked files

hgignore: simply ignore all *.exe's everywhere it's not like we're going to add any exe anywhere ever

tests: ignore pax_global_header in test-subrepo-git.t Failure seen on hgbuildbot 2.4 and 2.5 after 1894dac619de. Hide '../archive_x/s/pax_global_header' with same strange trick as in 5dda6c708138.

tests: remove GNU quoting in test-subrepo-deep-nested-change.t Test failure on non-GNU systems introduced in 1894dac619de.

tests: add '(glob)' for Windows paths in test-subrepo-deep-nested-change.t Test failure was introduced in 1894dac619de.

check-code: verify that 'saved backup bundle to ...' is '(glob)'ed This is the most frequent trivial reason tests fail on Windows.

tests: fix test markup in test-merge-types.t ca5cc2976574 introduced some tests that because of incorrect indentation wasn't run.

test-hgweb-diffs: partially adapt for Windows Since chmod isn't supported on Windows (or vfat), I'm importing a here-doc instead (<<EOF ..). Option --bypass on import of the here-doc is required on Windows (or vfat) to bypass the working directory (see hg help import). Not using --bypass would lose the mode changing bits. I've had to insert a --bypass on the preexisting import call futher down in the test, because importing a patch with --exact and mode changes will fail on Windows (and vfat). As the point of this test is not to test commit, I'm using the import procedure for all platforms unconditionally, that is, I'm intentionally not keeping the original sequence of hg and chmod calls for platforms that support exec either, which saves us having to insert an #if exec ... #else ... #endif.

subrepo: propagate matcher to subrepos when archiving Add a match object to subrepo.archive(). This will allow the -X and -I options to be honored inside subrepos when archiving. They formerly only affect the top level repo.

largefiles: remove a standin check that could never be true

largefiles: fix the directory structure when archiving a subrepo in a subrepo Previously, a repo consisting of main/sub/subsub archived sub and subsub as siblings under main.

largefiles: fix a traceback when archiving a subrepo in a subrepo This regression was introduced in 43fb170a23bd.

help: improve hgweb help The existing help only walked through an example. Now we first explain the basic rules and then show an example. The 'collections' example and description only cause confusion and is removed. Bikeshedded by Patrick Mezard <patrick@mezard.eu>

convert: keep branch switching merges with ancestors (issue3340) When running convert with a filemap, merge parents which are ancestors of other parents are ignored. This is hardly a problem when parents belong to the same branch, but the result could be confusing when named branches are involved. With: -o-a1-a2-a3... <- A \ \ b1-b2-b3...-m- <- B If all b* revisions are discarded, it is useful to preserve 'm' even if it is empty after filtering to record the branch switch. This patch makes filemap preserve "ancestor parents" if there is no "non-ancestor parent" on the same branch than the merge revision. Remarks: - I am not completely convinced by the reasons given above and those detailed by Matt in this thread: http://selenic.com/pipermail/mercurial-devel/2012-May/040627.html The properties we try to preserve are not clearly defined. That said, I know this patch already helped someone on IRC and the tests output look reasonable. - This is a new version of the original "convert: filemap must preserve fast-forward merges" patch. It has exactly the same output for 2 parents merges, the additional complexity is here to handle more than two parents.

revset: add "diff" field to "matching" keyword The new "diff" field lets you use the matching revset keyword to find revisions that apply the same change as the selected revisions. The match must be exact (i.e. same additions, same deletions, same modified lines and same change context, same file renames and copies). Two revisions matching their diff must also match their files. Thus, to match the diff much faster we will always check that the 'files' match first, and only then check that the 'diff' matches as well.

mq: defer command wrapping to extsetup (API) mq wraps all commands that are not in commands.norepo, which is now performed in this second phase of the extensions setup process. This goes against the current best practices on the wiki [1] as far as where command wrapping is performed, but follows it regarding where global options are injected. mq needs to be the first layer called when command dispatching in order to consistently retarget to the patch repo, regardless of the load order of the extensions. This means being the last to wrap the command table. Previously, 'hg <extdiff> --mq' would diff the main repo unless mq was enabled after extdiff. [1] http://mercurial.selenic.com/wiki/WritingExtensions

revset: ensure we are reversing a list (issue3530)

test-keyword: adapt for Windows

tests: don't use dates before epoch in test-keyword.t Timezone offsets of less than a minute is not shown but can cause displayed dates to be before epoch start - and dates before epoch start is not shown correctly on Windows (see also 4d5b12a5517b). These 'negative' dates could be considered undefined behaviour so we don't care and swap the tests values for timestamp and timezone.

tests: make test-convert-bzr.t more stable The test would occasionally fail because datesort don't have sub-second granularity and thus can't sort commits made in the same second. The test is made more stable by adding 1 second of sleep to make sure the bzr commits are done with different timestamps.

casecollision: add tests Add more tests to exercise the case collion detection code

dirstate: add dir/file collision test Add a test exercising collisions in add between files and directories of the same name.

dirstate: factor common update code into _addpath Factor update code common to all callers of _addpath into _addpath. By centralizing the update code here, it provides one place to put updates to new data structures - in a future patch. It also removes a few lines of duplicate code.

test-subrepo-relative-path: partially adapt for Windows

tests: make rm of usercache in test-largefiles.t more robust Recursive removal of a different path could be fatal - better avoid recursive rm completely.

merge with stable

merge with crew

tests: enable test-largefiles.t on Windows MSYS The 'serve' requirement is moved to the sections that really need it. $USERCACHE needs quoting.

test-largefiles: partially adapt for Windows The adaption is partial, because "serve" is not yet officially supported in tests on Windows. The test passes on Windows with an experimental testbed that supports hg serve in tests on Windows - except for some USERCACHE issues. The added (glob)'s are needed because of backslash <-> shlash issues in paths.

tests: make histedit pass on Windows MSYS The command file will now be named with $TESTTMP (with '\') instead of `pwd` (with '/') to avoid wrong path conversions.

tests: make histedit tests more resilient to filesystem variation Better quoting of odd filesystem paths and no dependency to execute bit.

tests: convert histedit tests to .t Mostly a trivial conversion.

histedit: use stable iteration order for processing bookmarks Random dict iteration order caused test failure in test-histedit-bookmark-motion.t.

Added signature for changeset b013baa3898e

Added tag 2.2.3 for changeset b013baa3898e