ui: disable echo back of prompt input if ui is set to non-tty purposely 9ab18a912c44 is nice for test output, but it also affects command-server channel. Command-server client shouldn't receive echo-back message, which makes it harder to parse the output.

dirstate: cache util.normcase while constructing the foldmap This is a small win on OS X. hg perfdirstatefoldmap: before: wall 0.399708 comb 0.410000 user 0.390000 sys 0.020000 (best of 25) after: wall 0.386331 comb 0.390000 user 0.370000 sys 0.020000 (best of 25)

normcase: for darwin, use fast ASCII lower Constructing the foldmap is much faster on OS X now. For a large real-world repo, hg perfdirstatefoldmap: before: wall 0.805278 comb 0.800000 user 0.790000 sys 0.010000 (best of 13) after: wall 0.399708 comb 0.410000 user 0.390000 sys 0.020000 (best of 25) This is a nice boost to 'hg status', especially with the third-party hgwatchman extension enabled (which eliminates stat calls). For the above repo, 'hg status' goes from 1.17 seconds to 0.74.

perf: add a way to measure the perf of constructing the foldmap Constructing the foldmap is a necessary part of operations like 'hg status' on OS X. This command allows us to measure the perf of constructing it.

encoding.lower: use fast ASCII lower This benefits, among other things, the case collision auditor. On a Linux system with a large real-world repo where all filenames are ASCII, hg perfcca: before: wall 0.260157 comb 0.270000 user 0.230000 sys 0.040000 (best of 38) after: wall 0.164616 comb 0.160000 user 0.160000 sys 0.000000 (best of 54)

parsers: add a function to efficiently lowercase ASCII strings We need a way to efficiently lowercase ASCII strings. For example, 'hg status' needs to build up the fold map -- a map from a canonical case (for OS X, lowercase) to the actual case of each file and directory in the dirstate. The current way we do that is to try decoding to ASCII and then calling lower() on the string, labeled 'orig' below: str.decode('ascii') return str.lower() This is pretty inefficient, and it turns out we can do much better. I also tested out a condition-based approach, labeled 'cond' below: (c >= 'A' && c <= 'Z') ? (c + ('a' - 'A')) : c 'cond' turned out to be slower in all cases. A 256-byte lookup table with invalid values for everything past 127 performed similarly, but this was less verbose. On OS X 10.9 with LLVM version 6.0 (clang-600.0.51), the asciilower function was run against two corpuses. Corpus 1 (list of files from real-world repo, > 100k files): orig: wall 0.428567 comb 0.430000 user 0.430000 sys 0.000000 (best of 24) cond: wall 0.077204 comb 0.070000 user 0.070000 sys 0.000000 (best of 100) lookup: wall 0.060714 comb 0.060000 user 0.060000 sys 0.000000 (best of 100) Corpus 2 (mozilla-central, 113k files): orig: wall 0.238406 comb 0.240000 user 0.240000 sys 0.000000 (best of 42) cond: wall 0.040779 comb 0.040000 user 0.040000 sys 0.000000 (best of 100) lookup: wall 0.037623 comb 0.040000 user 0.040000 sys 0.000000 (best of 100) On a Linux server-class machine with GCC 4.4.6 20120305 (Red Hat 4.4.6-4): Corpus 1 (real-world repo, > 100k files): orig: wall 0.260899 comb 0.260000 user 0.260000 sys 0.000000 (best of 38) cond: wall 0.054818 comb 0.060000 user 0.060000 sys 0.000000 (best of 100) lookup: wall 0.048489 comb 0.050000 user 0.050000 sys 0.000000 (best of 100) Corpus 2 (mozilla-central, 113k files): orig: wall 0.153082 comb 0.150000 user 0.150000 sys 0.000000 (best of 65) cond: wall 0.031007 comb 0.040000 user 0.040000 sys 0.000000 (best of 100) lookup: wall 0.028793 comb 0.030000 user 0.030000 sys 0.000000 (best of 100) SSE instructions might help even more, but I didn't experiment with those.

match: remove unnecessary setting of self._always The 'always' class calls its parent constructor with an empty list of patterns, which will result in a matcher that always matches. The parent constructor will set self._always to True in such cases, so there is no need to set it again.

bookmarks: port to generic templater

bookmarks: split ui.write() so that it can be easily ported to formatter api Test output changes because color labels are applied separately.

bookmarks: iterate bookmarks list even if it is known to be empty This clarifies that "no bookmarks set" is displayed in addition to the list of bookmarks. In JSON output, for example, [] should be written if empty, and "no bookmarks set" message should be skipped.

repoview: remove hiddencache verification We have been running hiddencache verification since 3.1.1 and so far not received a bug report concerning it. Therefore we remove the verification code and make the hiddencache authoritive. That way we get the intended speedup.

color: reorganise and sectionify the help text The color docstring was getting long. This splits it up into bite-sized sections and rearranges the order of the paragraphs a little to match these sections.

color: update description of the extension The color extension long ago ceased to work only for the status and qseries commands.

help: show all nested subsections of a section with `hg help foo.section` Used to be that `hg help hgrc.paths` would show "paths" ------- Assigns symbolic names to repositories. The left side is the symbolic name, and the right gives the directory or URL that is the location of the repository. Default paths can be declared by setting the following entries. and stop there. Obviously the result seems better as shown in the attached test.

help: fix output of sections in `hg help foo.somesection` There was a bug in c3c3dd31fe1c. The block that added definitions to getsections should have been an elif, not an if. Otherwise section titles get added twice, since the else clause would always get executed for section titles.

log: show phase in hg log -v with the phase template It seems weird that `hg log -v -T phases` would be *less* verbose than `hg log -T phases`. This cset corrects that oversight.

log: add labels to the phase template This copies the labelled default template and just adds an extra {phase} keyword as necessary.

log: rewrite default template to use labels (issue2866) This is a complete rewrite of the default template to use labels. This seems ultimately useless to me in most cases. The biggest benefit of this patch to me seems to be a fairly complicated example of the templating engine. It was a lot of hard work to figure out the precise acceptable syntax, since it's almost undocumented. Hat tip to Steve Losh's smartlog template, which helped me figure out a lot of the syntax. Hopefully later I can use the present default log template as an example for documenting the templating engine. A test is attached. My goal was to match the --color=debug output, which may differ slightly in newlines from the actual ANSI escape codes output. I consider this an acceptable invisible deviation. There seems to be a considerable slowdown with this rewrite. Before: $ time hg log -T default -r .~100::. > /dev/null real 0m0.882s user 0m0.812s sys 0m0.064s $ time hg log -T default -r .~100::. > /dev/null real 0m0.872s user 0m0.796s sys 0m0.068s $ time hg log -T default -r .~100::. > /dev/null real 0m0.917s user 0m0.836s sys 0m0.076s After: $ time hg log -T default -r .~100::. > /dev/null real 0m1.480s user 0m1.392s sys 0m0.072s $ time hg log -T default -r .~100::. > /dev/null real 0m1.500s user 0m1.400s sys 0m0.088s $ time hg log -T default -r .~100::. > /dev/null real 0m1.462s user 0m1.364s sys 0m0.092s Following the maxim, "make it work, profile, make it faster, in that order", I deem this slowdown acceptable for now. I suspect but have not confirmed that a big slowdown comes from calling keywords twice in the file templates, once to test the existence of output and again to actually list the output. If so, a simple speedup might be to improve the templating engine to cache keywords when called more than once on the same revision. TODO: I found a bug while working on this. The following stack traces: hg log -r . -T '{ifcontains(phase, "secret public", "lol", "omg")}\n'

log: do not hide the public phase in debug mode (BC) When 51fc43253a52 introduced phases to the `hg log --debug` output, it also disabled outputting public phase. At the same time, it always shows phases in the default template, `hg log --debug -T default`. Those two should produce the same output, but they don't. I think it makes a lot more sense to always show all phases. There's already loss of backwards compatibility in this case when using a newer hg on an old hg repo, since draft commits will show up in the output of `hg log --debug`. Finally, I just don't think that any sort of information should be hidden with --debug. This flag should be about showing as much information as possible.

templater: set the correct phase for parents Akin to f6371cc62d2a which did this for `hg log`, the following sets the correct phase for the {phase} keyword when the context is a parent of the current cset. This allows templates such as the following to be defined, parent = '{label("log.parent changeset.{phase}", "parent: {rev}:{node|formatnode}")}\n' which when called on a parent (e.g. with the `parents` template keyword), will produce the correct phase.

color: omit debug label output on empty strings This is most noticeable when using custom templates. Before this patch, a template like {label("foo.bar", baz)} would emit [foo.bar|] whenever baz was empty. This cset simply omits all output when baz is empty.

tests: make hghave list features alphabetically

revset: remove the now unused _descgeneratorset class

revset: use _generatorset in _revancestors The _descgeneratorset class is going away.

revset: remove now unused class _ascgeneratorset

revset: use _generatorset directly in _revdescendant _ascgeneratorset is going away.

generatorset: move membership testing on ordered gen to the main class We are phasing out the ordered version of the class to simplify the code.

generatorset: make use of the new mechanism in the subclass Until we remove them, we use the new parameter of _generatorset to make sure the code is run.

generatorset: make it possible to use gen as fastasc or fastdesc We gain a parameter to inform that the generator is ascending or descending. If the generator is ordered, it is also used for the `fastasc` or `fastdesc` version. The _ascgeneratorset and _descgeneratorset class will be removed soon.

baseset: rely on the abstractsmartset implementation for filter