revset: restore order of `or` operation as in Mercurial 2.9 Lazy revset broke the ordering of the `or` revset. We now stop assuming that two ascending revset are combine into an ascending one. Behavior in 3.0: 3:4 or 2:5 == [2, 3, 4, 5] Behavior in 2.9: 3:4 or 2:5 == [3, 4, 2, 5] We are adding a test for it. For unclear reason, the performance `or` revset with expensive filter are getting even worse than they used to be. This is probably caused by extra uncached containment check or iteration. revset #9: author(lmoscovicz) or author(mpm) before) wall 3.487583 comb 3.490000 user 3.490000 sys 0.000000 (best of 3) after) wall 4.481486 comb 4.480000 user 4.470000 sys 0.010000 (best of 3) revset #10: author(mpm) or author(lmoscovicz) before) wall 3.164839 comb 3.170000 user 3.160000 sys 0.010000 (best of 3) after) wall 4.574965 comb 4.570000 user 4.570000 sys 0.000000 (best of 3)

revset-_descendant: rework the whole sorting and combining logic We use the & operator to combine with subset (since this is more likely to be optimised than filter) and we enforce the sorting of the result. Without this enforced sorting, we may result in a different iteration order than the set _descendent was computed from. This reverts a bad `test-glog.t` change from 69402eb72115. Another side effect is that `test-mq.t` shows `qparent::` including `-1` if `qparent is -1`. This sound like a positive change. This has good and bad impacts on the benchmarks, here is a good ones: revset: 0:: before) wall 0.045489 comb 0.040000 user 0.040000 sys 0.000000 (best of 100) after) wall 0.034330 comb 0.030000 user 0.030000 sys 0.000000 (best of 100) revset: roots((0::) - (0::tip)) before) wall 0.134090 comb 0.140000 user 0.140000 sys 0.000000 (best of 63) after) wall 0.128346 comb 0.130000 user 0.130000 sys 0.000000 (best of 69) revset: ::p1(p1(tip)):: before) wall 0.143892 comb 0.140000 user 0.140000 sys 0.000000 (best of 55) after) wall 0.124502 comb 0.130000 user 0.130000 sys 0.000000 (best of 65) revset: roots((0:tip)::) before) wall 0.204966 comb 0.200000 user 0.200000 sys 0.000000 (best of 43) after) wall 0.184455 comb 0.180000 user 0.180000 sys 0.000000 (best of 47) Here is a bad one: revset: (20000::) - (20000) before) wall 0.009592 comb 0.010000 user 0.010000 sys 0.000000 (best of 222) after) wall 0.029837 comb 0.030000 user 0.030000 sys 0.000000 (best of 100)

addset: do lazy sorting The previous implementation was consuming the whole revset when asked for any sort. The addset class is now doing lazy sorting like all other smarset classes. This has no significant impact in the benchmark as-is. But this is important to later change.

test-import.t: use proper revset order This test, written after 3.0, is relying on addset being enforced ascending if both side are ascending. We are about to restore the ordering to 2.9 behavior (elements are ordered in the order they are specified). We fix the test before fixing the order.

baseset: drop custom __sub__ method This add method is enforcing non-laziness, disabling multiple optimisations. Benchmarks do not spot any significant difference but real usecase may. This will also be important for further improvements to addset later in this series.

baseset: drop custom __and__ method This add method is enforcing non-laziness, disabling multiple optimisations. Benchmarks do not spot any significant regression but real usecase may. This even gives some speedup in some cases: revset #15: min(0::) before) wall 0.001247 comb 0.000000 user 0.000000 sys 0.000000 (best of 1814) after) wall 0.000942 comb 0.000000 user 0.000000 sys 0.000000 (best of 2367) This will also be important for further improvement to addset later in this series.

baseset: drop custom __add__ method This add method is enforcing non-laziness, disabling multiple optimisations. Benchmarks do not spot any significant differences but real usecase may. This will also be important for further improvements to addset later in this series.

obsolete: use format version 1 as the default for obsstore

test-obsolete: remove subminute timezone in test Obsmarker format "1" does not supports sub minute timezone. So we change the test to something slightly more sensible.

obsolete: add a "format.obsstore-version" config option This option controls what version of the binary format to use when creating a new obsstore file. Default is still the old format. No safeguards are currently placed around the option value, but no clueless users are in danger of harm since it is undocumented.

obsolete: introduce a new binary encoding for obsmarkers (version 1) This new encoding explicitly stores the date and parents allowing a significantly faster marker decoding. See inline documentation for details. This format is not yet used to store format on disk. But it will be used in bundle2 exchange if both side support it. Support for on-disk format is coming in other changesets.

obsstore: add a flag for sha256 hashes We add flag to inform that the marker is using sha256 hashes. As format 0 is not able to handle sha256 hashes (32 bytes long), we plain crash if we even attempt to encode a sha256 with it.

obsolete: use uint## in the format documention This is shorter and kind of more readable for people who care about binary format.

obsolete: gather _fm0 meta encoding with other _fm0 code

obsolete: _rename decodemeta to _fm0decodemeta This will be format zero specific.

obsolete: _rename encodemeta to _fm0encodemeta This will be format zero specific.

obsolete: store metadata as a tuple of (key, value) pairs (API) Different formats will encode metadata in different ways. So we cannot keep the binary blob in the object anymore. We use a tuple to ensure it is immutable and hashable.

merge with stable

templater: fix ifcontains when list is a string (issue4399)

shelve: don't delete "." when rebase is a no-op (issue4398) When unshelving and facing a conflict, if we resolve all conflicts in favour of the committed changes instead of the shelved changes, then the ensuing implicit rebase is a no-op. That is, there is nothing to rebase. In this case, there are no extra intermediate shelve commits to strip either. Prior to this change, the commit being unshelved to would be marked for destruction in a rather catastrophic way. The relevant part of the test case failed as follows: $ hg unshelve -c unshelve of 'default' complete $ hg diff warning: ignoring unknown working parent 33f7f61e6c5e! diff --git a/a/a b/a/a new file mode 100644 --- /dev/null b/a/a @@ -0,0 1,3 @@ a c x $ hg status warning: ignoring unknown working parent 33f7f61e6c5e! M a/a ? a/a.orig ? foo/foo $ hg summary warning: ignoring unknown working parent 33f7f61e6c5e! parent: -1:000000000000 (no revision checked out) branch: default commit: 1 modified, 2 unknown (new branch head) update: 4 new changesets (update) With this change, this test case now passes.

merge: make error message consistent with other commands If a merge is attempted when another merge is already ongoing, we give the message "outstanding uncommitted merges". Many other commands (such as backout, rebase, histedit) give the same message in singular form. Since the singular form also seems to make more sense, let's use that for 'hg merge' as well.

test-run-tests: add a test for detection of failure to start a server This also highlights a bug: right now we print "2 failed" but we only ran one test.

run-tests: more accurate/helpful message than "diff generation failed" Diff generation didn't really fail, it recognized that an hg serve server has failed to start, and thus skipped the diff generation intentionally. The most common reason for a server to fail to start is that the port was already in use, so output HGPORT as well, to help finding it (since pgrep -f 'hg serve' is not sufficient, if the command line is something like 'hg -R main serve')

run-tests: handle --jobs and --first gracefully Without this change, --first causes currently-running tests to explode in violent and surprising ways when their temporary directory gets cleaned up. Now we just suppress failure messages from non-first failures when running in --first mode.