phase: put retractboundary out of the loop in advanceboundary It seems that we were calling retractboundary for each phases to process. Putting the retractboundary out of the loop reduce the number of calls, helping tracking the phases changes.

match: make unionmatcher a proper matcher unionmatcher is currently used where only a limited subset of its functions will be called. Specifically, visitdir() is never called. The next patch will pass it to dirstate.walk() where it will matter that visitdir() is correctly implemented, so let's fix that. Also add the explicitdir etc that will also be assumed by dirstate.walk() to exist on a matcher. Differential Revision: https://phab.mercurial-scm.org/D58

match: write forceincludematcher using unionmatcher The forceincludematcher is simply a unionmatcher of a includematcher (matching paths recursively) with the given matcher. Since the forceincludematcher is only used by sparse, move it there. I don't have a good sparse repo setup to test performance impact on. Differential Revision: https://phab.mercurial-scm.org/D57

histedit: extract InterventionRequired transaction handling to utils rebase will have similar logic, so let's extract it. Besides, it makes the histedit code more readable. We may want to parametrize acceptintervention() by the exception(s) that should result in transaction close. Differential Revision: https://phab.mercurial-scm.org/D66

histedit: create transaction outside of try Just a little refactoring to simplify the next patch. Differential Revision: https://phab.mercurial-scm.org/D65

histedit: remove transaction from state object The transaction is only used within a single function, so no need to store it on the state object. Differential Revision: https://phab.mercurial-scm.org/D64

phabricator: verify local tags before trusting them Previously we trust local tags blindly and that could cause wrong Differential Revision to be updated, when people switch between Phabricator instances. This patch adds verification logic to detect such issue and remove problematic tags. For example, a tag "D19" was on node "X", the code will fetch all diffs attached to D19, and check if nodes server-side overlaps with nodes in precursors. If they do not overlap, create a new Differential Revision. Test Plan: Use a test Phabricator instance, send patches using `hg phabsend`, then change the local tag manually to a wrong Differential Revision number. Amend the patch and send again. Make sure the tag gets ignored and deleted. Differential Revision: https://phab.mercurial-scm.org/D36

phabricator: finding old nodes in batch This allows us to do extra sanity checks using batch APIs to prevent updating a wrong revision, which could happen when people switch Phabricator instances and having stale tags living in the repo. Differential Revision: https://phab.mercurial-scm.org/D34

phabricator: respect metadata sent by arc Previously we only respect hg:meta sent by phabsend. This patch makes it respect local:commits sent by arc as well. This avoids issues where phabread could lose the author information. Test Plan: Commit using a customized user, send the patch using arc to a test Phabricator instance, and then read the patch using phabread. Make sure it preserves the user information. Differential Revision: https://phab.mercurial-scm.org/D33

dirstate: update backup functions to take full backup filename Update the dirstate functions so that the caller supplies the full backup filename rather than just a prefix and suffix. The localrepo code was already hard-coding the fact that the backup name must be (exactly prefix + "dirstate" + suffix): it relied on this in _journalfiles() and undofiles(). Making the caller responsible for specifying the full backup name removes the need for the localrepo code to assume that dirstate._filename is always "dirstate". Differential Revision: https://phab.mercurial-scm.org/D68

util: remove unused ctxmanager This was meant as a substitute for Python's "with" with multiple context managers before we moved to Python 2.7. We're now on 2.7, so we should have no reason to keep ctxmanager. "hg grep --all ctxmanager" says that it was never used anyway. Differential Revision: https://phab.mercurial-scm.org/D73

codemod: simplify nested withs This is the result of running: python codemod_nestedwith.py **/*.py where codemod_nestedwith.py looks like this: #!/usr/bin/env python # codemod_nestedwith.py - codemod tool to rewrite nested with # # Copyright 2017 Facebook, Inc. # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import, print_function import sys import redbaron def readpath(path): with open(path) as f: return f.read() def writepath(path, content): with open(path, 'w') as f: f.write(content) def main(argv): if not argv: print('Usage: codemod_nestedwith.py FILES') for i, path in enumerate(argv): print('(%d/%d) scanning %s' % (i + 1, len(argv), path)) changed = False red = redbaron.RedBaron(readpath(path)) processed = set() for node in red.find_all('with'): if node in processed or node.type != 'with': continue top = node child = top[0] while True: if len(top) > 1 or child.type != 'with': break # estimate line length after merging two "with"s new = '%swith %s:' % (top.indentation, top.contexts.dumps()) new += ', %s' % child.contexts.dumps() # only do the rewrite if the end result is within 80 chars if len(new) > 80: break processed.add(child) top.contexts.extend(child.contexts) top.value = child.value top.value.decrease_indentation(4) child = child[0] changed = True if changed: print('updating %s' % path) writepath(path, red.dumps()) if __name__ == "__main__": sys.exit(main(sys.argv[1:])) Differential Revision: https://phab.mercurial-scm.org/D77

reposvfs: add a ward to check if locks are properly taken we wrap 'repo.svfs.audit' to check for the store lock when accessing file in '.hg/store' for writing. This caught a couple of instance where the transaction was released after the lock, we should probably have a dedicated checker for that case.

repovfs: add a ward to check if locks are properly taken When the appropriate developer warnings are enabled, We wrap 'repo.vfs.audit' to check for locks when accessing file in '.hg' for writing. Another changeset will add a 'ward' for the store vfs (svfs). This check system has caught a handful of locking issues that have been fixed in previous series (mostly in 4.0). I expect another batch to be caught in third party extensions. We introduce two real exceptions from extensions 'blackbox.log' (because a lot of read-only operations add entry to it), and 'last-email.txt' (because 'hg email' is currently a read only operation and there is value to keep it this way). In addition we are currently allowing bisect to operate outside of the lock because the current code is a bit hard to get properly locked for now. Multiple clean up have been made but there is still a couple of them to do and the freeze is coming.

vfs: allow to pass more argument to audit We want to be able to do more precise check when auditing a path depending of the intend of the file access (eg read versus write). So we now pass the 'mode' value to 'audit' and update the audit function to accept them. This will be put to use in the next changeset.

zsh_completion: add '--partial' flag to completions for 'import' (issue5618) When using the 'import' command running ZSH together with its Mercurial-specific completions the flag '--partial' (introduced in Mercurial 3.1, 2014-08-01) is not offered as completion option. This patch adds it to the list of completions for the 'import' command.

configitems: register the 'bugzilla.password' config

configitems: register the 'bugzilla.mocklog' config

test-amend: fix HGEDITOR shell script to run on Windows Windows doesn't know how to launch *.sh directly. This workaround is used in several other tests.

test-paths: mask out JSON specific path differences for Windows The backslashes in the local paths were being escaped with another backslash, and $TESTTMP doesn't match against the double backslashed path. This doesn't happen without the 'json' filter.

tests: categorize entries in blacklist for fsmonitor for future reference

tests: avoid tests related to directory permission if running with fsmonitor

tests: add extra output for fsmonitor at checking under .hg

tests: add extra output for fsmonitor at showconfig

tests: take extra care for fsmonitor at enabling incompatible extension This is worthwhile, because these tests don't focus mainly on using incompatible extensions itself.

tests: remove meaningless entries from blacklist for fsmonitor IMHO, these tests were listed up in blacklist at 3b67f27bb908, because fsmonitor extension wasn't correctly installed before actual testing at that revision (this issue was fixed by 776fd2e2cf5a).

tests: remove meaningless comment from blacklist for fsmonitor These tests can run successfully since fe0667cc521e.

test-https: stabilize for Windows A leading '/' without a following drive letter is resolved to the location of the MSYS installation. These could be collapsed into a single line of output, but this seems more self documenting.

tagmerge: use workingfilectx to write merged tags This function already does an excellent job of reading from context objects; we simply need to change the single write call to eliminate all uses of the wvfs. As with past changes, the effect should be a no-op but opens the door to in-memory merge later by using different context objects.

run-tests: add color to output if pygments is available The output of run-tests has no formatting by default, which hampers readability. This patch colors the diff output when pygments is available. To avoid coloring even when pygments is available, use --color never.

win32: work around a WinError problem handling HRESULT types I ran into this ctypes bug while working with the Crypto API. While this could be an issue with any Win32 API in theory, the handful of things that we call are older functions that are unlikely to return COM errors, so I didn't retrofit this everywhere.

test-check-pyflakes: do not leave test.py in the repo Differential Revision: https://phab.mercurial-scm.org/D67

revset: add experimental ancestors/descendants relation subscript The relation name is 'generations' now, which may be changed in future.

revset: add experimental relation and subscript operators The proposed syntax [1] was originally 'set{n rel}', but it seemed slightly confusing if template is involved. On the other hand, we want to keep 'set[n]' for future extension. So this patch introduces 'set#rel[n]' ternary operator. I chose '#' just because it looks like applying an attribute. This also adds stubs for 'set[n]' and 'set#rel' operators since these syntax elements are fundamental for constructing 'set#rel[n]'. [1]: https://www.mercurial-scm.org/wiki/RevsetOperatorPlan#ideas_from_mpm

revset: do not compute weight for integer literal argument In x^n and x~n, n isn't a set expression. There's no need to optimize the right-hand side.

templatekw: export ui.paths as {peerpaths} It's sometimes useful to show hyperlinks in log output. "{get(peerpaths, "default")}/rev/{node}" Since each path may have sub options, "{peerpaths}" is structured as a dict of dicts, but the inner dict is rendered as if it were a string URL. The implementation is ad-hoc, so there are some weird behaviors described in the test. We might need to introduce a proper way of handling a hybrid scalar object. This patch adds _hybrid.__getitem__() so d['path']['url'] works. The keyword is named as "peerpaths" since "paths" seemed too generic in log context.

summary: fix type of empty unresolved list It was okay because tested as a boolean prior to calling len(), but looked incorrect.

vfs: rename auditvfs to proxyvfs Since we've removed mustaudit property, auditvfs has no auditing business. It's just a utility class for vfs wrappers.

streamclone: comment why path auditing is disabled in generatev1() Copied from 39c6e349dfff. I wasn't sure whether it's for optimization or suppressing unwanted error.

streamclone: close large revlog files explicitly in generatev1()

bundle2: no longer use 'retractboundary' in updatephases The new 'phase-heads' forced all added node to secret before advancing the boundary to work around the fact changesets were added as draft by default. This is no longer necessary since the changegroup part can now use the 'targetphase' parameter. Not doing this retract boundary call has a couple of advantages: * This makes implementing phases change tracking in the transaction much simpler since retract boundary can become a rare case. * Bundling secret changesets is not the norm. Exchange never does that and even for strip, the use-case is not common.Skipping the retract boundary will avoid useless work here. * Sending phase update on push can be simplified since we can rely on the behavior of 'cg.apply' for most of it. This means less phases update send for example. * We no longer needs to track and use the addednodes during unbundling. This make it possible to have multiple 'changegroup' and 'phase-heads' parts in the same bundle without them interfering with each others. The new part has not been part of any release yet so we do not offer backward compatibility yet. It is important to update this semantic before the 4.3 freeze happens.

bundle2: automatically add 'targetphase' parameter in writenewbundle If we are bundling secret changeset and the bundle will contain phase, we request the changegroup to be applied as secret. It will be useful for next patch as we are now sure that secrets changesets are applied as secret and not applied as draft then forced to secret.

bundle2: support the 'targetphase' parameter for the changegroup part By default unbundled changesets are drafts. We want to reduce the number of phases changes during unbundling by giving the possibility to the bundle to indicate the phase of unbundled changesets. The longer terms goal is to add phase movement tracking in tr.changes and the 'retractboundary' call is making it more complicated than we want.

changegroup: stop treating strip as special when dealing with phases Since 8e3021fd1a44, the strip bundle includes the phases of the stripping node. Hence we don't need this special case anymore. Dropping it will helps make the phase behavior more consistent across all exchanges medium.

match: inverse _anypats(), making it _prefix()

amend: new extension providing the amend command Various third parties have implemented the `amend` command, which is in high demand. This patch adds it as an experimental extension so its interface could be formalized in core directly. Since `commit --amend` is basically what `amend` should do. The command is just a thin wrapper around `commit --amend` and just prevent the editor from popping up by passing `--message`.

py3: make localrepo filtered repo cache work on py3 I don't know if this is the right fix, but it makes test-py3-commands.t pass again. Differential Revision: https://phab.mercurial-scm.org/D56

configitems: register the 'bugzilla.host' config

configitems: register the 'bugzilla.fixstatus' config

configitems: register the 'bugzilla.fixresolution' config

configitems: register the 'bugzilla.fixregexp' config

configitems: register the 'bugzilla.db' config

configitems: register the 'bugzilla.bzuser' config

configitems: register the 'bugzilla.bzurl' config

configitems: register the 'bugzilla.bzemail' config

configitems: register the 'bugzilla.bzdir' config