Drew Gottlieb <drgott@google.com> [Wed, 22 Apr 2015 12:59:12 -0700] rev 24916
localrepo: have stream_in() not modify its argument
Localrepo's stream_in function modified its requirements argument. This is not
good practice because it may be unexpected behavior to the caller.
Drew Gottlieb <drgott@google.com> [Wed, 22 Apr 2015 12:06:44 -0700] rev 24915
localrepo: make _applyrequirements more specific
Localrepo's _applyrequirements function isn't very straightforward about what
it does. Its purpose is to both act as a setter for the requirements attribute,
and to apply appropriate requirements to the opener's configuration.
This change makes the function just focus on the latter responsibility. We
rename it as such, and make setting the requirements attribute the
responsibility of the caller.
Drew Gottlieb <drgott@google.com> [Tue, 21 Apr 2015 17:16:10 -0700] rev 24914
localrepo: make requirements always be a set in localrepo.__init__
The init function used to create a local list, and then convert it to a set
before assigning it as a data attribute. This change simplifies the function by
having it always be a set, requiring no conversion.
Drew Gottlieb <drgott@google.com> [Tue, 21 Apr 2015 16:55:30 -0700] rev 24913
localrepo: eliminate requirements class variable (API)
Localrepo's requirements class variable was introduced in b090601a80d1 to make
requirements modifiable by extensions. A main access point, _baserequirements,
still exists, but this change undoes making the class variable to begin with.
Without this simplification, there is a class variable with a default value
that is only copied, but never directly used. This behavior is moved directly
into the _baserequirements function.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 29 Apr 2015 10:30:58 -0700] rev 24912
changegroup.group: drop 'reorder' parameter
Since we always pass self._reorder to self.group(), let's drop the
parameter and let group() read from self._reorder itself. There are no
other in-tree callers to group().
Martin von Zweigbergk <martinvonz@google.com> [Wed, 29 Apr 2015 10:38:45 -0700] rev 24911
cg2packer: set reorder=False in __init__ instead of in group()
The difference between reorder=None (bundle.reorder=auto) and
reorder=False is that the generaldelta revlogs get reordered with the
former. In cg2packer, group() we check if the revlog uses generaldelta
and if reorder=None and then convert that to reorder=False. We are
effectively saying that whether or not generaldelta is used, we want
reorder=None to mean reorder=False for changegroup 2. To make this
clearer, check if reorder=None in the constructor and change it to
False there and drop the overriding of group(). Also document the
reason for turning reordering off.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 23 Apr 2015 09:44:22 -0700] rev 24910
changegroup: use 'reorder is None' instead of 'reorder is not True/False'
The config option bundle.reorder can be {on,off,auto}, which gets read
into the 'reorder' variable as {True,False,None}. In two places, we
need to decide how to handle the None/auto case. I personally find it
easier to read those expressions when written to explicitly compare to
None.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 09 Apr 2015 23:47:07 -0400] rev 24909
crecord: fix mixed imports warning
Matt Harbison <matt_harbison@yahoo.com> [Fri, 01 May 2015 20:17:00 -0400] rev 24908
windows: add doctest for shellquote()
This is actual test coverage for issue4629. The test changes in eea3977e6fca
were simply the addition of quotes to the output, not ensuring that strings with
backslashes are quoted.
Yuya Nishihara <yuya@tcha.org> [Sat, 25 Apr 2015 21:42:07 +0900] rev 24907
template-phases: extend default style instead of duplicating it
The phases style started as a copy of the default style at 5c5152af0d15, but
we didn't have to copy it because the templater supports %include syntax.
This makes sure that the phases style have the same output as the default
except for the additional "phase:" row.
Yuya Nishihara <yuya@tcha.org> [Thu, 30 Apr 2015 22:40:18 +0900] rev 24906
commands: hide formatter option as EXPERIMENTAL, not as DEPRECATED
117b9a101f71 introduced the EXPERIMENTAL marker, so we should use it
consistently.
Christian Ebert <blacktrash@gmx.net> [Sat, 18 Apr 2015 15:39:26 +0200] rev 24905
keyword: use wvfs.rmtree to remove kwdemo directory
Pass repo.root explicitly as argument to indicate that removal of the temporary
repo is intentional in this case.
Alexander Drozdov <al.drozdov@gmail.com> [Mon, 20 Apr 2015 10:52:20 +0300] rev 24904
revset: id() called with 40-byte strings should give the same results as for short strings
The patch solves two issues:
1. id(unknown_full_hash) aborts, but id(unknown_short_hash) doesn't
2. id(40byte_tag_or_bookmark) returns tagged/bookmarked revision,
but id(non-40byte_tag_or_bookmark) doesn't
After the patch:
1. id(unknown_full_hash) doesn't abort
2. id(40byte_tag_or_bookmark) returns empty set
Yuya Nishihara <yuya@tcha.org> [Sun, 03 May 2015 17:33:14 +0900] rev 24903
templater: fix crash by passing invalid object to date() function
"date information" is somewhat obscure, but we call it that way in
templatekw.showdate().
Siddharth Agarwal <sid0@fb.com> [Sun, 03 May 2015 12:49:15 -0700] rev 24902
util.checkcase: don't abort on broken symlinks
One case where that would happen is while trying to resolve a subrepo, if the
path to the subrepo was actually a broken symlink. This bug was exposed by an
hg-git test.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 22 Apr 2015 15:03:09 -0700] rev 24901
changegroup: close progress in same function as it's started
changegroup.group() and changegroup.generatefiles() both currently
start progress (with topic "bundling"), but changegroup.generate()
closes the topic. Move the closing to the functions that start the
topic, so it's easier to see where the topic is started and closed.
This completes a move that seems to have been started in 0b564cf359a7
(bundle-ng: move progress handling out of the linkrev callback,
2013-05-10).
Martin von Zweigbergk <martinvonz@google.com> [Tue, 28 Apr 2015 10:21:04 -0700] rev 24900
changegroup: don't reuse 'mfest' variable for different type
We have a variable 'mfest' that's first a manifest nodeid and then a
manifest. Let's make it clearer by using separate variables for the
two uses.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 28 Apr 2015 10:19:42 -0700] rev 24899
changegroup: rename 'mf' to 'ml' to match 'cl', since it's a revlog
The 'mf' variable is a manifest revlog, not a manifest, so let's
rename it accordingly. We already call the changelog variable 'cl', so
'ml' seems appropriate.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 20 Apr 2015 14:11:20 -0700] rev 24898
changegroup: rename 'needed' to 'clrevs' to match 'clnodes'
Martin von Zweigbergk <martinvonz@google.com> [Tue, 28 Apr 2015 13:49:19 -0700] rev 24897
changegroup: document that 'source' parameter exists for extensions
The 'source' parameter passed to generatefiles() is unused by the
method itself, but Durham says it is used by an extension.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 28 Apr 2015 13:40:00 -0700] rev 24896
changegroup: removed unused 'source' parameter from prune()
The parameter has been unused since it was introduced in 6ea1f858efd9
(bundle: refactor changegroup prune to be its own function,
2013-05-30), and Durham says it is not used by his extension either.
Matt Mackall <mpm@selenic.com> [Fri, 01 May 2015 17:21:10 -0500] rev 24895
merge with stable
Matt Mackall <mpm@selenic.com> [Fri, 01 May 2015 16:49:15 -0500] rev 24894
Added signature for changeset 8cc6036bca53
Matt Mackall <mpm@selenic.com> [Fri, 01 May 2015 16:48:51 -0500] rev 24893
Added tag 3.4 for changeset 8cc6036bca53
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 02 May 2015 00:15:03 +0900] rev 24892
tests: make tests with temporary environment setting portable
With "dash" (as "/bin/sh" on Debian GNU/Linux), command execution in
"ENV=val foo bar" style doesn't work as expect in test script files,
if "foo" is user-defined function: it works fine, if "foo" is existing
commands like "hg".
09049042ab99 introduced tests for HGPLAIN and HGPLAINEXCEPT into
test-revset.t, and all of them are in such style.
This patch doesn't:
- add explicit unsetting for HGPLAIN and HGPLAINEXCEPT
they are already introduced by 09049042ab99
- write assignment and exporting in one line
"ENV=val; export ENV" for two or more environment variables in one
line causes failure of test-check-code-hg.t: it is recognized as
"don't export and assign at once" unfortunately.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 30 Apr 2015 23:02:52 -0400] rev 24891
debuginstall: expand the editor path before searching for it (issue4380)
The editor launches without expanding the path with commits because the shell
does that for us.
If the path isn't an executable, the expanded path is displayed, which is
probably more useful than the unexpanded path. For example, in cmd.exe, '~'
expands to C:\Users\$user. But it expands to C:/mingw/msys/1.0/home/$user in
MinGW.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Fri, 01 May 2015 22:19:20 +0900] rev 24890
censor: fix incorrect configuration name for ignoring error at censored file
According to recent "filectx.data()" implementation, "censor.policy"
should be configured as "ignore" to ignore error at censored file:
"censor.allow" seems outdated name.
Matt Mackall <mpm@selenic.com> [Thu, 30 Apr 2015 17:50:50 -0500] rev 24889
merge with i18n
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Thu, 30 Apr 2015 19:12:28 +0900] rev 24888
i18n-ja: synchronized with 194207694def
Wagner Bruna <wbruna@softwareexpress.com.br> [Wed, 29 Apr 2015 16:43:02 -0300] rev 24887
i18n-pt_BR: synchronized with 89fe9921511f
Ryan McElroy <rmcelroy@fb.com> [Thu, 30 Apr 2015 12:33:36 -0700] rev 24886
templater: fail more gracefully for blank strings to word
Matt Harbison <matt_harbison@yahoo.com> [Wed, 29 Apr 2015 21:14:59 -0400] rev 24885
windows: make shellquote() quote any path containing '\' (issue4629)
The '~' in the bug report is being expanded to a path with Windows style slashes
before being passed to shellquote() via util.shellquote(). But shlex.split()
strips '\' out of the string, leaving an invalid path in dispatch.aliasargs().
This regressed in 1642eb429536.
For now, the tests need to be conditionalized for Windows (because those paths
are quoted). In the future, a more complex regex could probably skip the quotes
if all component separators are double '\'. I opted to glob away the quotes in
test-rename-merge2.t and test-up-local-change.t (which only exist on Windows),
because they are in very large blocks of output and there are way too many diffs
to conditionalize with #if directives. Maybe the entire path should be globbed
away like the following paths in each changed line. Or, letting #if directives
sit in the middle of the output as was mentioned a few months back would work
too.
Unfortunately, I couldn't figure out how to test the specific bug. All of the
'hg serve' tests have a #require serve declaration, causing them to be skipped
on Windows. Adding an alias for 'expandtest = outgoing ~/bogusrepo' prints the
repo as '$TESTTMP/bogusrepo', so the test runner must be changing the
environment somehow.
Matt Harbison <matt_harbison@yahoo.com> [Wed, 29 Apr 2015 23:55:25 -0400] rev 24884
test-commit-interactive: add more globs for no-execbit platforms
The ability to set the exec bit on Windows would be real handy for this test..
Siddharth Agarwal <sid0@fb.com> [Thu, 30 Apr 2015 07:46:54 -0700] rev 24883
ui: disable revsetaliases in plain mode (BC)
ui.plain() is supposed to disable config options that change the UI to the
detriment of scripts. As the test demonstrates, revset aliases can actually
override builtin ones, just like command aliases. Therefore I believe this is a
bugfix and appropriate for stable.
Yuya Nishihara <yuya@tcha.org> [Wed, 29 Apr 2015 19:47:37 +0900] rev 24882
bundlerepo: disable filtering of changelog while constructing revision text
This avoids the following error that happened if base revision of bundle file
was hidden. bundlerevlog needs it to construct revision texts from bundle
content as revlog.revision() does.
File "mercurial/context.py", line 485, in _changeset
return self._repo.changelog.read(self.rev())
File "mercurial/changelog.py", line 319, in read
text = self.revision(node)
File "mercurial/bundlerepo.py", line 124, in revision
text = self.baserevision(iterrev)
File "mercurial/bundlerepo.py", line 160, in baserevision
return changelog.changelog.revision(self, nodeorrev)
File "mercurial/revlog.py", line 1041, in revision
node = self.node(rev)
File "mercurial/changelog.py", line 211, in node
raise error.FilteredIndexError(rev)
mercurial.error.FilteredIndexError: 1
Matt Harbison <matt_harbison@yahoo.com> [Wed, 29 Apr 2015 15:52:31 -0400] rev 24881
merge: run update hook after the last wlock release
There were 2 test failures in 3.4-rc when running test-hook.t with the
largefiles extension enabled. For context, the first is a commit hook:
@@ -618,9 +621,9 @@
$ echo 'update = hg id' >> .hg/hgrc
$ echo bb > a
$ hg ci -ma
- 223eafe2750c tip
+ d3354c4310ed+
$ hg up 0
- cb9a9f314b8b
+ 223eafe2750c+ tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
make sure --verbose (and --quiet/--debug etc.) are propagated to the local ui
In both cases, largefiles acquires the wlock before calling into core, which
also acquires the wlock. The first case was fixed in 57f1dbc99631 by ensuring
the hook only runs after the lock has been fully released. The full release is
important, because that is what writes dirstate to the disk, allowing external
hooks to see the result of the update. This simply changes how the update hook
is called, so that it too is deferred until the lock is finally released.
There are many uses of mergemod.update(), but in terms of commands, it looks
like the following commands take wlock while calling mergemod.update(), and
therefore will now have their hook fired at a later time:
backout, fetch, histedit, qpush, rebase, shelve, transplant
Unlike the others, fetch immediately unlocks after calling update(), so for all
intents and purposes, its hook invocation is not deferred (but the external hook
still sees the proper state).
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Thu, 30 Apr 2015 03:39:39 +0900] rev 24880
censor: remove meaningless explanation about .hgcensored
There is no code path handling ".hgcensored" in Mercurial source tree.
This meaningless explanation may make users misunderstand about
censor.
Yuya Nishihara <yuya@tcha.org> [Wed, 29 Apr 2015 23:07:34 +0900] rev 24879
parsers: avoid signed integer overflow in calculation of leaf-node index
If v = -INT_MAX - 1, -v would exceed INT_MAX. I don't think this would cause
problems such as issue4627, but we can't blame it as a compiler bug because
signed integer overflow is undefined in C.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 28 Apr 2015 17:38:02 -0700] rev 24878
bundle2: disable ouput capture unless we use http (issue4613 issue4615)
The current bundle2 processing was capturing all output. This is nice as it
provide better meta data about what output what, but this was changing two
things:
1) adding a prefix "remote: " to "other" output during local push (issue4613)
2) local and ssh push does not provide real time output anymore (issue4615)
As we are unsure about what form should be used in (1) and how to solve (2) we
disable output capture in this two cases. Output capture can be forced using an
experimental option.
Matt Harbison <matt_harbison@yahoo.com> [Tue, 03 Feb 2015 15:01:43 -0500] rev 24877
subrepo: propagate the --hidden option to hg subrepositories
With many commands accepting a '-S' or an explicit path to trigger recursing
into subrepos, it seems that --hidden needs to be propagated too.
Unfortunately, many of the subrepo layer methods discard the options map, so
passing the option along explicitly isn't currently an option. It also isn't
clear if other filtered views need to be propagated, so changing all of those
commands may be insufficient anyway.
The specific jam I got into was amending an ancestor of qbase in a subrepo, and
then evolving. The patch ended up being hidden, and outgoing said it would only
push one unrelated commit. But push aborted with an 'unknown revision' that I
traced back to the patch. (Odd it didn't say 'filtered revision'.) A push with
--hidden worked from the subrepo, but that wasn't possible from the parent repo
before this.
Since the underlying problem doesn't actually require a subrepo, there's
probably more to investigate here in the discovery area. Yes, evolve + mq is
not exactly sane, but I don't know what is seeing the hidden revision.
In lieu of creating a test for the above situation (evolving mq should probably
be blocked), the test here is a marginally useful case where --hidden is needed
in a subrepo: cat'ing a file in a hidden revision. Without this change, cat
aborts with:
$ hg --hidden cat subrepo/a
skipping missing subrepository: subrepo
[1]
Matt Harbison <matt_harbison@yahoo.com> [Mon, 27 Apr 2015 21:34:23 -0400] rev 24876
subrepo: don't pass the outer repo's --rev or --branch to subrepo incoming()
When passing a --rev, 'hg incoming -S' previously suffered from the same output
truncation or abort that was fixed for 'hg outgoing -S' in the previous patch,
for the same reasons.
Unlike push, subrepos are currently only pulled when the outer repo is updated,
not when the outer repo is pulled. That makes matching 'hg pull' behavior
impossible. Listing all incoming csets in the subrepo seems like the most
useful behavior, and is consistent with 'hg outgoing -S'.
Matt Harbison <matt_harbison@yahoo.com> [Mon, 27 Apr 2015 21:15:25 -0400] rev 24875
subrepo: don't pass the outer repo's --rev or --branch to subrepo outgoing()
The previous behavior didn't reflect what would actually be pushed- push will
ignore --rev and --branch in the subrepo and push everything. Therefore,
'push -r {rev}' would not list everything, unless {rev} was also the revision of
the subrepo's tip. Worse, if a hash was passed in, the command would abort
because that hash would either not be in the outer repo or not in the subrepo.
Matt Harbison <matt_harbison@yahoo.com> [Mon, 27 Apr 2015 20:25:09 -0400] rev 24874
subrepo: update the help text to account for diff -I/-X gitsubrepo support
The functionality was added in a48b65ab428d.
Laurent Charignon <lcharignon@fb.com> [Mon, 27 Apr 2015 15:37:57 -0700] rev 24873
revert: make the interactive mode experimental
While fixing issue4304: "record: allow editing new files" we introduced
changes in record/crecord. These changes need to be matched with changes in any
command using record. Revert is one of these commands and the changes have
not been made for this release. Therefore, revert -i should be an experimental
feature for this release.
Laurent Charignon <lcharignon@fb.com> [Mon, 27 Apr 2015 15:36:10 -0700] rev 24872
shelve: make the interactive mode experimental
While fixing issue4304: "record: allow editing new files" we introduced
changes in record/crecord. These changes need to be matched with changes in any
command using record. Shelve is one of these commands and the changes have
not been made for this release. Therefore, shelve -i should be an experimental
feature for this release.
Siddharth Agarwal <sid0@fb.com> [Mon, 27 Apr 2015 15:12:41 -0700] rev 24871
help: also hide options marked EXPERIMENTAL
Similar to DEPRECATED, add a way to indicate that options are EXPERIMENTAL.
Gregory Szorc <gregory.szorc@gmail.com> [Tue, 28 Apr 2015 10:19:46 -0700] rev 24870
rebase: don't forward "source" argument to rebase (issue4633)
`hg pull` takes an optional "source" argument to define the path/url to
pull from. Under some circumstances, this option could get proxied to
rebase and interpretted as the --source argument to rebase, leading to
unexpected behavior.
In my local environment, "source" always appears in "opts" in
pullrebase. However, when attempting to write a test, I couldn't reproduce
this. Instead, the source is being captured as a positional argument in
"args." I suspect an interaction between **kwargs and an extension is to
blame for the differences in behavior. This is why no test has been
written.
I have tested behavior locally and the patch has the intended
side-effect of making `hg pull --rebase` work again.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Tue, 28 Apr 2015 23:27:18 +0900] rev 24869
histedit: fix reST syntax problem of example code in help document
To show example code correctly in online help, text block of it should
be preceded by "::" and indented.
Wagner Bruna <wbruna@softwareexpress.com.br> [Mon, 27 Apr 2015 19:13:55 -0300] rev 24868
webcommands: fix description of manifest default behavior
Wagner Bruna <wbruna@softwareexpress.com.br> [Mon, 27 Apr 2015 19:09:54 -0300] rev 24867
webcommands: fix typo in changelog documentation
Laurent Charignon <lcharignon@fb.com> [Mon, 27 Apr 2015 14:02:49 -0700] rev 24866
record: fix adding new file with record from within a subdir (issue4626)
In my latest change on record (edit newly added file), I forgot the
repo.wjoin() so that record was not computing the paths properly to delete
the backups and was crashing.
Matt Mackall <mpm@selenic.com> [Mon, 27 Apr 2015 16:24:43 -0500] rev 24865
tests: fix backslashes in test-casefolding
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 25 Apr 2015 23:44:53 +0900] rev 24864
cmdutil: avoid wrapping ctx.phasestr() by _()
This wrapping seems meaningless, because:
- there is no "_()" invocation to prepare for extracting phase names
to be translated
"make update-pot" doesn't extract msgids for phase names
- phase names are kine of reserved keywords like as branch name "default"
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sat, 25 Apr 2015 23:44:53 +0900] rev 24863
repair: avoid string concatenation by + operator
String concatenation by "+" operator causes failure of extracting
messages to be translated.
Python automatically concatenates strings separated by whitespaces
into one string.
Yuya Nishihara <yuya@tcha.org> [Sat, 25 Apr 2015 15:38:06 +0900] rev 24862
annotate: always adjust linkrev before walking down to parents (issue4623)
This should avoid the bad performance in the following scenario. Before this
patch, on "hg annotate -r10000", p.rev() would walk changelog from 10000 to 3
because _descendantrev was 10000. With this patch, it walks from 5 to 3.
1 -- 2 -- 4 -- 5 -- ... -- 10000
\ 'p' 'f'
- 3 (grafted 3 to 4)
'p'
repo: https://hg.mozilla.org/releases/mozilla-beta/#4f80fecda802
command: hg annotate -r b0a57152fd14 browser/app/profile/firefox.js
before: 83.120 secs
after: 3.820 secs
This patch involves extra calls of narrow _adjustlinkrev(), but the cost of
them seems relatively small compared to wide _adjustlinkrev() calls eliminated
by this patch.
repo: http://selenic.com/repo/hg/#8015a3cf1380
command: hg annotate mercurial/commands.py
before: 7.380 secs
after: 7.320 secs
repo: https://hg.mozilla.org/mozilla-central/#f214df6ac75f
command: hg annotate layout/generic/nsTextFrame.cpp
before: 5.070 secs
after: 5.050 secs
repo: https://hg.mozilla.org/releases/mozilla-beta/#4f80fecda802
command: hg annotate -r 4954faa47dd0 gfx/thebes/gfxWindowsPlatform.cpp
before: 1.600 secs
after: 1.620 secs
Matt Harbison <matt_harbison@yahoo.com> [Sun, 26 Apr 2015 15:13:13 -0400] rev 24861
test-commit-interactive: stablize output for no-execbit platforms
Matt Harbison <matt_harbison@yahoo.com> [Sun, 26 Apr 2015 15:10:09 -0400] rev 24860
test-bundle2-exchange: make hooks compatible with Windows
The cmd.exe process doesn't fail the hook when "; false" is appended, and its
echo command prints out the quote characters.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Tue, 28 Apr 2015 00:38:16 +0900] rev 24859
i18n: extract doc string of each web commands as translatable one
Before this patch, doc string of each web commands isn't extracted as
translatable one, even though web commands are listed up in "hg help
hgweb".
This patch adds "mercurial/hgweb/webcommands.py" on to arguments of
"i18n/hggettext". "i18nfunctions" added into "webcommands.py" is used
by "i18n/hggettext" to get the list of functions having translatable
doc string.
Matt Harbison <matt_harbison@yahoo.com> [Fri, 24 Apr 2015 23:23:55 -0400] rev 24858
subrepo: don't write .hgsubstate lines with empty subrepo state (issue4622)
The '' that is used to represent the state of a not-yet-committed
subrepo cannot be written to the file, because the code that parses
the file splits on ' ' and expects two parts.
Given that the .hgsubstate file is automatically rewritten on commit, it seems
a little strange that the file is written out during a merge.
Matt Harbison <matt_harbison@yahoo.com> [Sat, 25 Apr 2015 23:54:31 -0400] rev 24857
revert: restore the ability to revert across case only renames (issue4481)
This regressed in 5e16fe6fdd32, in what looks like an unrelated change.
It seems sufficient to pass 'ignoremissing=True', but the restored try/except
has been there for six years since 41bb88cb913e, so this seems safer for now.
Note that renaming directories in the filename doesn't appear to work- not sure
if this would end up throwing a different type of error when that is fixed.
Matt Mackall <mpm@selenic.com> [Mon, 27 Apr 2015 11:11:26 -0500] rev 24856
convert: avoid traceback in subversion sink
We've had a couple reports of subversion tracebacks that trigger when
the parents list is empty, and thus block showing what the commit
failure was on the next two lines.
Matt Mackall <mpm@selenic.com> [Fri, 24 Apr 2015 15:29:02 -0500] rev 24855
merge with i18n
Wagner Bruna <wbruna@yahoo.com> [Thu, 23 Apr 2015 00:07:37 -0300] rev 24854
i18n-pt_BR: synchronized with 5947a68fa271
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Fri, 24 Apr 2015 14:52:12 -0400] rev 24853
template-phases: do not show description or summary if empty
This is a copy of c1cb6523e968, but applied to the phases template,
which is itself almost a copy of the default template.
Perhaps we should rewrite these templates to use the %include syntax
afforded by config files. This change seems a bit too big for stable,
though.