largefiles: allow the archiving of largefiles to be disabled There are currently no users of this, but it is a necessary step before converting extdiff to use archive. It may be useful to add an argument to extdiff in the future and allow largefiles to be diffed, but archiving largefiles can have significant overhead and may not be very diffable, so archiving them by default seems wrong. It is a mystery to me why the lfstatus attribute needs to be set on the unfiltered repo. However if it is set on the filtered repo instead (and the filtered repo is passed to the original command), the lfstatus attribute is False in the overrides for archival.archive() and hgsubrepo.archive() when invoking the archive command. This smells like the buggy status behavior (see 67d63ec85eb7, which was reverted in df463ca0adef). Neither the status nor summary commands have this weird behavior in their respective overrides.

parsers: fix buffer overflow by invalid parent revision read from revlog If revlog file is corrupted, it can have parent pointing to invalid revision. So we should validate it before updating nothead[], phases[], seen[], etc. Otherwise it would cause segfault at best. We could use "rev" instead of "maxrev" as upper bound, but I think the explicit "maxrev" can clarify that we just want to avoid possible buffer overflow vulnerability.

histedit: mark temporary commits as obsolete when allowed to Before this patch, we were stripping temporary commits at the end of a histedit whether it was successful or not. If we can create obs markers, we should create them instead of stripping because it is faster and safer.

histedit: minor refactoring of createmarkers check We use a variable to store whether or not we can create obsolescence markers. It makes the patch series more readable as we are going to reuse this values in other places in the function.

crecord: fix issue when backgrounding editor would leave artefact Before this patch: - if a user was entering a commit message after having ran the curses interface - and then uses ctrl-z, followed by fg to put the editor in the background/foreground - then the curses interface would leave artefact on the screen of the editor, making entering the commit message a difficult task This happened because ncurses registers a signal handler for SIGTSTP and does not restore the original signal handler after running. More info at: http://stackoverflow.com/questions/31440392/ curses-wrapper-messing-up-terminal-after-background-foreground-sequence/ 31441709#31441709 This patch restores the original value of the signal handler after running the curses interface and therefore fixes this issue. It don't know how to add a test for this issue, I tested the scenario above manually and it works correctly with the patch.

censor: make various path forms available like other Mercurial commands Before this patch, censored file should be exactly "a path relative to repository root" regardless of current working directory, because "hg censor" passes "path" to "repo.file()" directly without any preparations. To make various path forms available like other Mercurial commands, this patch gets a target file path in the way of "hg parents FILE". Getting "wctx" is relocated to reuse "wctx" for efficiency.

convert: use 'default' for specifying branch name in branchmap (issue4753) A fix for issue2653 with 1d155582a8ea introduced a discrepancy how default branch should be denoted when converting with branchmap from different SCM. E.g. for Git and Mercurial you need to use 'default' whilst for Perforce and SVN you had to use 'None'. This changeset unifies 'default' for such purposes whilst falling back to 'None' when no 'default' mapping specified.

parser: extract function that tests if next token may start new term Future patches will separate primary expression and prefix operator actions. This function will be used to resolve ambiguity of them. This is a step to remove the old-style revexpr parser. We need both ":" and ":y" operators for backward compatibility.

parser: factor out function that parses right-hand side of prefix/infix ops These two had common pattern. The significant difference was just a result expression: prefix: (op-name, rhs) infix: (op-name, lhs, rhs)

parser: remove unused parameter 'pos' from _match() This backs out 9d1cf337a78d. The issue spotted by that changeset was addressed earlier by d4cafcb63f77.

parser: fill invalid infix and suffix actions by None This can simplify the expansion of (prefix, infix, suffix) actions.

parser: add comment about structure of elements to each table

shelve: omit incorrect 'commit' suggestion at 'hg shelve -i' Before this patch, 'hg shelve -i' under non-interactive mode suggests 'use commit instead', and it obviously incorrect, because what user wants to do isn't 'commit' but 'shelve'. To omit incorrect 'commit' suggestion at 'hg shelve -i', this patch specifies 'None' for 'cmdsuggest' argument of 'cmdutil.dorecord()'.

record: omit meaningless 'qrefresh' suggestion at 'hg qrefresh -i' Before this patch, 'hg qrefresh -i' under non-interactive mode suggests 'use qrefresh instead', and it obviously meaningless. To omit meaningless 'qrefresh' suggestion at 'hg qrefresh -i', this patch specifies 'None' for 'cmdsuggest' argument of 'cmdutil.dorecord()'.

record: omit meaningless 'qnew' suggestion at 'hg qnew -i' Before this patch, 'hg qnew -i' under non-interactive mode suggests 'use qnew instead', and it obviously meaningless. To omit meaningless 'qnew' suggestion at 'hg qnew -i', this patch adds internal function '_qrecord()' and specifies 'cmdsuggest' for each of 'qrecord' and 'qnew' separately.

record: omit meaningless 'commit' suggestion at 'hg commit -i' Before this patch, 'hg commit -i' under non-interactive mode suggests 'use commit instead', and it obviously meaningless. This patch makes 'record.record'()' examine 'ui.interactive()' and show suggestion by itself before calling 'commands.commit()'. This allows 'commands.commit()' to specify 'None' for 'cmdsuggest' argument of 'cmdutil.dorecord()' to omit meaningless 'commit' suggestion at 'hg commit -i'.

cmdutil: allow callers of cmdutil.dorecord to omit suggestion Interactive committing under non-interactive mode shows command suggestion, but sometimes it is meaningless. command suggestion usability ------------ ---------- ----------- record commit commit -i commit meaningless qrecord qnew qnew -i qnew meaningless qrefersh -i qrefresh meaningless shelve -i commit incorrect ------------ ---------- ----------- This patch allows callers of 'cmdutil.dorecord()' to omit meaningless suggestion by passing None or so for 'cmdsuggest' argument of it. This is a preparation for subsequent patches, which fix each suggestion issues above.

spartan: don't drop current revision in log/graph links Just to be consistent with log and shortlog links, graph links should have a revision context too. And the same goes for the graph page, where it's log and shortlog links that should have context.

hgk: tweak doc format for path option This lets the config checker see it.

acl: mark deprecated config option This option has been undocumented since day 0.

gpg: mention undocumented options

check-config: add config option checker This script scans files for lines that look like either ui.config usage or config variable documentation. It then ensures: - ui.config calls for each option agree on types and defaults - every option appears to be mentioned in documentation It doesn't complain about devel/experimental options and allows marking options that are not intended to be public. Since we haven't been able to come up with a good scheme for documenting config options at point of use, this will help close the loop of making sure all options that should be documented are.

bookmarks: clear active bookmark on non-linear update

convert: unescape Perforce-escaped special characters in filenames

convert: allow customizing git remote prefix Previously all git remotes were created as "remote/foo". This patch adds a configuration option for deciding what the prefix should be. This is useful if you want the bookmarks to be "origin/foo" like they are in git, or if you're integrating with the remotenames extension and don't want the local remote/foo bookmarks to overlap with the remote foo bookmarks.

help: rewrite template examples to not use shell escaping Though they work fine even on cmd.exe, these examples could lead to misguided understanding about the template syntax.

templater: unify "string" and "rawstring" "rawstring" was introduced by 5ab28a2e9962, but it's no longer necessary because c1975809a6b5 and fd5bc660c9f0 changed the way of processing string literals. This patch moves string decoding to the parsing phase as it was before: ('rawstring', s) -> ('string', s) ('string', s) -> ('string', s.decode('string-escape'))

templater: remove processing of "string" literals from tokenizer They are processed as "template" strings now.

templater: introduce one-pass parsing of nested template strings Instead of re-parsing quoted strings as templates, the tokenizer can delegate the parsing of nested template strings to the parser. It has two benefits: 1. syntax errors can be reported with absolute positions 2. nested template can use quotes just like shell: "{"{rev}"}" It doesn't sound nice that the tokenizer recurses into the parser. We could instead make the tokenize itself recursive, but it would be much more complicated because we would have to adjust binding strengths carefully and put dummy infix operators to concatenate template fragments. Now "string" token without r"" never appears. It will be removed by the next patch.

templater: check existence of closing brace of template string