formatter: fix handling of None value in templater mapping For historical reasons, None in mapping dict means there's no such keyword, and falls back to b"". That's fine in log templates where mapping item is generally a callable returning a value (which may be None,) but the formatter directly puts an "evaluated" value in the mapping. So the None value has to be lifted to wrappedvalue(None) to avoid confusion in the template engine.

config: add support for defaultvalue of list of printable elements

config: fix -Tjson to not crash due to unsupported defaultvalue types Maybe it isn't great to ignore unsupported types at all, but otherwise "hg config -Tjson" would crash.

tests: handle Message-Id email header possible wrapping The "Message-Id" header will get wrapped with a new line when exceeding 75 characters on Python 3 (see changeset 7d4f2e4899c5 introducing usage of email.header.Header.encode and respective doc). This will occur in an unpredictable manner depending on the hostname's length. To make the test output consistent across Python versions and hostname configuration, we add a filter to unwrap this header value.

py3: leverage pycompat.long

packaging: remove version info from Breaks+Replaces in Debian package The versioned Breaks: and Replaces: cause problem when trying to install our package over the one in Debian. $ sudo apt install ./packages/debian-buster/mercurial_5.2~rc0+15-buster-a2ff3aff81d2_amd64.deb Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting 'mercurial' instead of './packages/debian-buster/mercurial_5.2~rc0+15-buster-a2ff3aff81d2_amd64.deb' Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mercurial : Breaks: mercurial-common (< 5.2~rc0+15-buster-a2ff3aff81d2) but 5.2~rc0-1 is to be installed E: Unable to correct problems, you have held broken packages. Removing version information resolves the situation.

py3: fix generated non-ascii message in test-notify.t The resulting "Subject:" header contains an encoded word in Python 3 so we have to add distinct outputs for Python 3 but underlying values are the same: >>> from email.header import decode_header >>> decode_header('=?utf-8?b?w6AuLi4=?=') [(b'\xc3\xa0...', 'utf-8')]

py3: decode encoding literal before passing to .decode() bytes.decode(<encoding>) wants an str as "encoding" parameter, it raises a TypeError if given a bytestring. encoding.encoding and encoding.fallbackencoding are bytes values.

py3: decode payload of notify email This fixes one UnicodeEncodeError in test-notify.t:422 when testing the notify hook with non-ascii content (there are more later). We only decode on Python 3, since it's not safe for sure on Python 2.

py3: decode email headers with mail.headdecode() in notify extension

py3: use stdlib's parseaddr() to get sender header in notify extension In Python 3, email headers are unicode string so using stringutil.email() will not work as it compares with bytestring. So let's use email.utils.parseaddr() from the stdlib which has a consistent behavior across Python versions. The same is done in patchbomb extension already.

py3: use a BytesParser in notify extension This is the first step to make the "long line" case in test-notify.t pass by fixing a UnicodeDecodeError on Python 3. We alias a parsebytes() in mail module, similarly as we already have a parse() function for Python 2 and Python 3 compatibility.

py3: fix headencode() with display=False We previously called str() on a email.header.Header object. On Python 2, this returns a bytestring and the __str__ method is actually an alias to .encode() method. On Python 3, __str__ does not perform encoding (and returns a unicode string). To keep a consistent behavior across Python versions, we explicitly use .encode() and we wrap the result with encoding.strtolocal() to get a bytestring in all cases. As a side effect of forcing bytes conversion, we need to decode back in _addressencode(). This is to make test-notify.t pass on Python 3. Also note that headers are now encoded in some patchbomb tests; this is because the charset is not always "us-ascii" ("iso-8859-1" otherwise) on Python 3.

mail: catch LookupError in headdecode() We already catch this exception in _encode() (called by headencode()). It gets raised when running test-notify.t with Python 3.

py3: account for extra line break in email headers in test-notify.t Long headers appears to be wrapped with new lines. In test-notify.t, we have a "filter.py" that replaces "\n" by " ", so we get an extra space in a Message-Id with a long value.

py3: use as_bytes() method of EmailMessage In Python 3, as_bytes() corresponds to as_string() in Python 2.

py3: use %d instead of %s when formatting an int into a bytestring The latter wasn't noticed before since no tests exercise --confirm at all, let alone on an existing DREV. The former is only hit during an intermittent network issue during amending at the end of a phabsend, so doesn't seem testable. Differential Revision: https://phab.mercurial-scm.org/D7153

packaging: ship only a single binary Debian package We merge the mercurial and mercurial-common binary packages into a single mercurial package. This is essentially to ease installation (and upgrade) using a simple "dpkg -i" command. This also simplifies debian/rules by removing arch (in)dependent cleanups during installation. We have the mercurial binary Breaks: and Replaces: mercurial-common so that the latter will be removed upon upgrade. Also note the change from "override_dh_install" to "override_dh_auto_install" in debian/rules: this is because we do not want "make install" to be run automatically as we need the --install-layout=deb of "setup.py install" (otherwise, files would end up in $DESTDIR/usr/local).

packaging: avoid running bare "make install" in debian/rules We change the "override_dh_install" target to "override_dh_auto_install" in debian/rules (see dh_auto_install(1) for details). This is because we do not want "make install" to be run automatically as we need the --install-layout=deb of "setup.py install". Otherwise, files end up in $DESTDIR/usr/local. At the moment, this is not a problem since files installed in debian/tmp (the default location) are not packed into binary packages (because there are debian/mercurial and debian/mercurial-common directories). This is cleaner to avoid running make more than needed.

packaging: distinguish clean and build steps from install in Debian

packaging: also move Debian .buildinfo file in output directory

packaging: upgrade packages distributed with Windows installers We like to use the latest versions of things. I added pywin32-ctypes to the explicit list of packages so running on !Windows will pull in the dependency.

automation: install Python 2.7.17, 3.7.5, and PyPy 7.2.0 These were all recently released and we should use them in automation.

contrib: install Python 2.7.17 and 3.7.5 in Windows environment These are the latest Python versions and we should use them.

packaging: use /usr/bin/python3 shebang for scripts in Debian "hg" script is already correct because it is handled by setup.py but "hg-ssh" will be rewritten by dh_python into "/usr/bin/python" which is not wanted as we target Python 3. By passing --shebang=/usr/bin/python3 to dh_python3, we force shebangs to be set with this value.

packaging: fix path where .deb files are looked for In builddeb script, the path where .deb files are looked for should simply be $OUTPUTDIR since the previous instruction moves those files there. This fixes "make deb".

packaging: let Debian package depends on sensible-utils This fixes the following Lintian error: E: mercurial-common: missing-depends-on-sensible-utils etc/mercurial/hgrc.d/default-tools.rc

packaging: upgrade Debian packaging to build with Python 3 Also drop the explicit "Depends: python" as debhelper will add it.

py3: decode bytes before logging in run-tests.py Avoids messages like "Found prerequisite b'diff' at b'/usr/bin/diff'" under Python 3.

Added signature for changeset 59338f956109

Added tag 5.2rc0 for changeset 59338f956109

merge default into stable for 5.2 release

grep: update docs to reflect new --all-files default These docs no longer even mention the old weird behaviour that was poorly understood and underutilised. I think this undocumentation effectively deprecates it.

grep: enable all-files by default (BC) This patch deprecates the `--all-files` flag and make the all-files behaviour as default. In test-grep.t, I removed '--all-files' from every command where it was used, to reflect that all-files behaviour is default and there is no change even after the removal. And other changes in test files are because of changed behaviour. Differential Revision: https://phab.mercurial-scm.org/D7000 .. bc:: `hg grep` now searches working copy file contents by default. We recognize this is a significant change from past behavior, but surveys of large bodies of users indicated nobody used (and almost nobody understood) the previous no-flags behavior of `hg grep`. The new behavior aligns with the behavior most users expected (including hg's maintainers), which also happens to be the behavior of `git grep`. Given that the old behavior was confusing to the point of being unusable, we were comfortable changing this behavior.

lfs: dedent documentation section about .hglfs file The leading ".hglfs::" is interpreted as a macro in generated man page and, as it is unknown, the whole section does not render. Also, having the section marked as preformatted (::) makes it render verbatim in HTML, which is not desired as the text contains formatting markers. So we just dedent the section and remove the ".hglfs::" line. The example file is still indented and rendered preformatted.

copies: simplify chain loop This is a mostly gratuitous change to make the code more direct. Differential Revision: https://phab.mercurial-scm.org/D7131

sidedatacopies: only fetch information once for merge Before this change, merge would result in reading the data from revlog twice. With this change, we keep the information in memory until we encounter the other parent. When looking at pypy, I see about 1/3 of the changesets with copy information being merge. Not doing duplicated fetch for them provide a significant speedup. revision: large amount; added files: large amount; rename small amount; c3b14617fbd7 9ba6ab77fd29 before: ! wall 0.767042 comb 0.760000 user 0.750000 sys 0.010000 (median of 11) after: ! wall 0.671162 comb 0.670000 user 0.650000 sys 0.020000 (median of 13) revision: large amount; added files: small amount; rename small amount; c3b14617fbd7 f650a9b140d2 before: ! wall 1.170169 comb 1.170000 user 1.130000 sys 0.040000 (median of 10) after: ! wall 1.030596 comb 1.040000 user 1.010000 sys 0.030000 (median of 10) revision: large amount; added files: large amount; rename large amount; 08ea3258278e d9fa043f30c0 before: ! wall 0.209846 comb 0.200000 user 0.200000 sys 0.000000 (median of 46) after: ! wall 0.170981 comb 0.170000 user 0.170000 sys 0.000000 (median of 56) revision: small amount; added files: large amount; rename large amount; df6f7a526b60 a83dc6a2d56f before: ! wall 0.013248 comb 0.010000 user 0.010000 sys 0.000000 (median of 223) after: ! wall 0.013295 comb 0.020000 user 0.020000 sys 0.000000 (median of 222) revision: small amount; added files: large amount; rename small amount; 4aa4e1f8e19a 169138063d63 before: ! wall 0.001672 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) after: ! wall 0.001666 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) revision: small amount; added files: small amount; rename small amount; 4bc173b045a6 964879152e2e before: ! wall 0.000119 comb 0.000000 user 0.000000 sys 0.000000 (median of 8010) after: ! wall 0.000119 comb 0.000000 user 0.000000 sys 0.000000 (median of 8007) revision: medium amount; added files: large amount; rename medium amount; c95f1ced15f2 2c68e87c3efe before: ! wall 0.168599 comb 0.160000 user 0.160000 sys 0.000000 (median of 58) after: ! wall 0.133316 comb 0.140000 user 0.140000 sys 0.000000 (median of 73) revision: medium amount; added files: medium amount; rename small amount; d343da0c55a8 d7746d32bf9d before: ! wall 0.036052 comb 0.030000 user 0.030000 sys 0.000000 (median of 100) after: ! wall 0.032558 comb 0.030000 user 0.030000 sys 0.000000 (median of 100) Differential Revision: https://phab.mercurial-scm.org/D7127

copies: move from a copy on branchpoint to a copy on write approach Before this changes, any branch points results in a copy of the dictionary containing the copy information. This can be very costly for branchy history with few rename information. Instead, we take a "copy on write" approach. Copying the input data only when we are about to update them. In practice we where already doing the copying in half of these case (because `_chain` makes a copy), so we don't add a significant cost here even in the linear case. However the speed up in branchy case is very significant. Here are some timing on the pypy repository. revision: large amount; added files: large amount; rename small amount; c3b14617fbd7 9ba6ab77fd29 before: ! wall 1.399863 comb 1.400000 user 1.370000 sys 0.030000 (median of 10) after: ! wall 0.766453 comb 0.770000 user 0.750000 sys 0.020000 (median of 11) revision: large amount; added files: small amount; rename small amount; c3b14617fbd7 f650a9b140d2 before: ! wall 1.876748 comb 1.890000 user 1.870000 sys 0.020000 (median of 10) after: ! wall 1.167223 comb 1.170000 user 1.150000 sys 0.020000 (median of 10) revision: large amount; added files: large amount; rename large amount; 08ea3258278e d9fa043f30c0 before: ! wall 0.242457 comb 0.240000 user 0.240000 sys 0.000000 (median of 39) after: ! wall 0.211476 comb 0.210000 user 0.210000 sys 0.000000 (median of 45) revision: small amount; added files: large amount; rename large amount; df6f7a526b60 a83dc6a2d56f before: ! wall 0.013193 comb 0.020000 user 0.020000 sys 0.000000 (median of 224) after: ! wall 0.013290 comb 0.010000 user 0.010000 sys 0.000000 (median of 222) revision: small amount; added files: large amount; rename small amount; 4aa4e1f8e19a 169138063d63 before: ! wall 0.001673 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) after: ! wall 0.001677 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) revision: small amount; added files: small amount; rename small amount; 4bc173b045a6 964879152e2e before: ! wall 0.000119 comb 0.000000 user 0.000000 sys 0.000000 (median of 8023) after: ! wall 0.000119 comb 0.000000 user 0.000000 sys 0.000000 (median of 7997) revision: medium amount; added files: large amount; rename medium amount; c95f1ced15f2 2c68e87c3efe before: ! wall 0.201898 comb 0.210000 user 0.200000 sys 0.010000 (median of 48) after: ! wall 0.167415 comb 0.170000 user 0.160000 sys 0.010000 (median of 58) revision: medium amount; added files: medium amount; rename small amount; d343da0c55a8 d7746d32bf9d before: ! wall 0.036820 comb 0.040000 user 0.040000 sys 0.000000 (median of 100) after: ! wall 0.035797 comb 0.040000 user 0.040000 sys 0.000000 (median of 100) The extra cost in the linear case can be reclaimed later with some extra logic. Differential Revision: https://phab.mercurial-scm.org/D7124

copies: compute the exact set of revision to walk This change make the code clearer by removing the revision queue. It comes without very noticeable performance impact. However the simpler code will be easier to update in later changesets. revision: large amount; added files: large amount; rename small amount; c3b14617fbd7 9ba6ab77fd29 before: ! wall 1.430082 comb 1.430000 user 1.390000 sys 0.040000 (median of 10) after: ! wall 1.405192 comb 1.410000 user 1.390000 sys 0.020000 (median of 10) revision: large amount; added files: small amount; rename small amount; c3b14617fbd7 f650a9b140d2 before: ! wall 1.971366 comb 1.970000 user 1.950000 sys 0.020000 (median of 10) after: ! wall 1.892541 comb 1.890000 user 1.870000 sys 0.020000 (median of 10) revision: large amount; added files: large amount; rename large amount; 08ea3258278e d9fa043f30c0 before: ! wall 0.252594 comb 0.250000 user 0.240000 sys 0.010000 (median of 38) after: ! wall 0.240075 comb 0.240000 user 0.240000 sys 0.000000 (median of 40) revision: small amount; added files: large amount; rename large amount; df6f7a526b60 a83dc6a2d56f before: ! wall 0.013100 comb 0.010000 user 0.010000 sys 0.000000 (median of 226) after: ! wall 0.013247 comb 0.010000 user 0.010000 sys 0.000000 (median of 223) revision: small amount; added files: large amount; rename small amount; 4aa4e1f8e19a 169138063d63 before: ! wall 0.001633 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) after: ! wall 0.001670 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) revision: small amount; added files: small amount; rename small amount; 4bc173b045a6 964879152e2e before: ! wall 0.000078 comb 0.000000 user 0.000000 sys 0.000000 (median of 11984) after: ! wall 0.000119 comb 0.000000 user 0.000000 sys 0.000000 (median of 7982) revision: medium amount; added files: large amount; rename medium amount; c95f1ced15f2 2c68e87c3efe before: ! wall 0.207093 comb 0.210000 user 0.210000 sys 0.000000 (median of 47) after: ! wall 0.201551 comb 0.200000 user 0.200000 sys 0.000000 (median of 48) revision: medium amount; added files: medium amount; rename small amount; d343da0c55a8 d7746d32bf9d before: ! wall 0.038462 comb 0.040000 user 0.040000 sys 0.000000 (median of 100) after: ! wall 0.036578 comb 0.030000 user 0.030000 sys 0.000000 (median of 100) Differential Revision: https://phab.mercurial-scm.org/D7076

copies: add an explicit test using multiple roots We explicitly add a test checking for copies of connected revision but involving a different roots. This make sure the copies coming purely from the new roots does not interfere with the merge. Differential Revision: https://phab.mercurial-scm.org/D7075

sidedatacopies: fast path data fetching if revision has no sidedata When using the side data mode, we know their won't be any copy information sidedata. Skipping revision restoration give an important speed boost. In the future, there will be other user of sidedata, reducing the efficiency of this. We should consider adding a dedicated flag in revlog V2 to preserve this optimisation. The current situation is good enough for now. revision: large amount; added files: large amount; rename small amount; c3b14617fbd7 9ba6ab77fd29 before: ! wall 2.401569 comb 2.400000 user 2.390000 sys 0.010000 (median of 10) after: ! wall 1.429294 comb 1.430000 user 1.410000 sys 0.020000 (median of 10) revision: large amount; added files: small amount; rename small amount; c3b14617fbd7 f650a9b140d2 before: ! wall 3.519140 comb 3.520000 user 3.470000 sys 0.050000 (median of 10) after: ! wall 1.963332 comb 1.960000 user 1.960000 sys 0.000000 (median of 10) revision: large amount; added files: large amount; rename large amount; 08ea3258278e d9fa043f30c0 before: ! wall 0.593880 comb 0.600000 user 0.590000 sys 0.010000 (median of 15) after: ! wall 0.251679 comb 0.250000 user 0.250000 sys 0.000000 (median of 38) revision: small amount; added files: large amount; rename large amount; df6f7a526b60 a83dc6a2d56f before: ! wall 0.013414 comb 0.020000 user 0.020000 sys 0.000000 (median of 220) after: ! wall 0.013222 comb 0.020000 user 0.020000 sys 0.000000 (median of 223) revision: small amount; added files: large amount; rename small amount; 4aa4e1f8e19a 169138063d63 before: ! wall 0.002711 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) after: ! wall 0.001631 comb 0.000000 user 0.000000 sys 0.000000 (median of 1000) revision: small amount; added files: small amount; rename small amount; 4bc173b045a6 964879152e2e before: ! wall 0.000077 comb 0.000000 user 0.000000 sys 0.000000 (median of 12208) after: ! wall 0.000078 comb 0.000000 user 0.000000 sys 0.000000 (median of 12012) revision: medium amount; added files: large amount; rename medium amount; c95f1ced15f2 2c68e87c3efe before: ! wall 0.410067 comb 0.410000 user 0.410000 sys 0.000000 (median of 23) after: ! wall 0.207786 comb 0.200000 user 0.200000 sys 0.000000 (median of 46) revision: medium amount; added files: medium amount; rename small amount; d343da0c55a8 d7746d32bf9d before: ! wall 0.097004 comb 0.090000 user 0.090000 sys 0.000000 (median of 100) after: ! wall 0.038495 comb 0.030000 user 0.030000 sys 0.000000 (median of 100) Differential Revision: https://phab.mercurial-scm.org/D7074

largefiles: use context manager for setting "lfstatus" on subrepos too It's safe since we now reset to the previous value. Differential Revision: https://phab.mercurial-scm.org/D7138

largefiles: reset "lfstatus" attribute to previous value in "finally" We were resetting it to False, which means nesting of these overrides would be incorrect. Differential Revision: https://phab.mercurial-scm.org/D7137

largefiles: add context manager for setting/clearing "lfstatus" attribute Differential Revision: https://phab.mercurial-scm.org/D7136

py3: adjust expected traceback in test-hook.t In Python 3, traceback.format_exception() displays the chain of exceptions so we get extra results from our grep. Also, ModuleNotFoundError is raised instead of ImportError from Python 3.6.

tests: use non-reverse grep in traceback in test-hook.t This will prepare for updating test output for Python 3.

py3: add Python 3 exception output to test-hook.t This is similar to, e.g., 3e9c6cef949b.

py3: ajust abort message in test-hook.t

rust-cpython: prepare for writing tests that require libpython What I wanted is to disable the "cpython/extension-module<ver>" feature while building tests executable, but that seems not doable. Instead, this patch adds new features dedicated for tests. The make rule is extracted so that we can easily run cargo tests. Added a minimal test of ref-sharing as an example. More tests will follow.

rust-cpython: make inner functions and structs of ref_sharing private Most of these methods were public because they had to be accessible from macro-generated functions. Some "unsafe" can be removed since we can guarantee the data consistency across non-public operations.

rust-cpython: keep Python<'a> token in PyRefMut This just clarifies that the GIL is obtained while PyRefMut is dereferenced, so there's no need of extra acquire_gil() to drop the reference.

rust-cpython: require GIL to borrow immutable reference from PySharedRefCell Since the inner value may be leaked, we probably need GIL to guarantee that there's no data race. inner(py).borrow() is replaced with inner_shared(py).borrow(), which basically means any PySharedRefCell data should be accessed through PySharedRef wrapper.

rust-cpython: make PyLeakedRef operations relatively safe This patch encapsulates the access to the leaked reference to make most leaked-ref operations safe. The only exception is leaked_ref.map(). I couldn't figure out how to allow arbitrary map operation safely over an unsafe static reference. See the docstring and inline comment for details. Now leak_immutable() can be safely implemented as the PyLeakedRef owns its inner data.

rust-cpython: put leaked reference in PyLeakedRef The next patch will make PyLeakedRef manage the lifetime of the underlying object. leak_handle.data.take() will be removed soon.

run-tests: make code coverage work on Python 3 This code path was obviously not tested on Python 3 because it blew up in several places due to str/bytes mismatch. For internal code, we normalize paths to bytes. For code calling into `coverage`, we normalize paths to str, which is what `coverage` seems to expect. After this, `run-tests.py -H` works on Python 3! Differential Revision: https://phab.mercurial-scm.org/D7133

py3: don't index into bytes in phabricator's _tokenize() `phabread`ing a stack using `hg phabread :D1234` under py3 will currently die with a KeyError because it will index into `b':D1234'` and return `58` instead of `b':'` as a token. Differential Revision: https://phab.mercurial-scm.org/D7129

rust-dirstate-status: use fast-path even with fsmonitor and sparse extensions When I initially ran the tests on my series, there were test failures related to those extensions. Now that the initial series has landed, I felt like going back to those issues because people with performance issues will often want to use fsmonitor and sparse. Either because of flaky tests or because the series has changed so much, I can't seem to reproduce these issues... let's widen the scope of the fast-path. Differential Revision: https://phab.mercurial-scm.org/D7128

rust-dirstatemap: remove additional lookups in dirstatemap We're copying this shortcut from the Python implementation, pretty standard for this codebase. Differential Revision: https://phab.mercurial-scm.org/D7117

tests: avoid chmod on windows in hgrc tests Follow up on changeset d201a637c971 introducing this test, which fails on Windows.

py3: fix sorting of obsolete markers during push This fixes similar errors as in 01e8eefd9434: TypeError: '<' not supported between instances of 'NoneType' and 'tuple'