Yuya Nishihara <yuya@tcha.org> [Mon, 01 May 2017 13:43:31 +0900] rev 32483
demandimport: strictly compare identity of proxy object
This looks better, and __eq__() may be overridden in an undesired way.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 23 May 2017 08:49:01 -0700] rev 32482
match: use ProgrammingError where appropriate
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 23 May 2017 01:30:36 +0530] rev 32481
revlog: raise error.WdirUnsupported from revlog.node() if wdirrev is passed
When we try to run, 'hg debugrevspec 'branch(wdir())'', it throws an index error
and blows up. Lets raise the WdirUnsupported if wdir() is passed so that we can
catch that later.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 23 May 2017 01:22:33 +0530] rev 32480
revset: add support for ancestors(wdir())
This is a part of extending support for wdir() predicate.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 23 May 2017 01:08:19 +0530] rev 32479
revset: add support for using ~ operator on wdir() predicate
We catch the WdirUnsupported exception and handles the wdir() case here.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 02:14:22 +0530] rev 32478
revset: add support for p2(wdir()) to get second parent of working directory
This adds support for finding the second parent of working directory using the
p2 predicate.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 02:03:43 +0530] rev 32477
revset: use try-except instead of if-else because of perf
For wdir(), we now raises an exception which will be raised when wdir() will be
passed, so catching that exception is better checking for wdir() using if-else.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 01:38:00 +0530] rev 32476
revset: remove redundant condition and change to else from elif
Before going to this piece of code, we already check whether n is in [0, 1, 2],
so dropping the redundant condition.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 01:35:53 +0530] rev 32475
tests: add tests for predicates and operators which works with wdir()
This one is cluttering up the test file though.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 01:01:45 +0530] rev 32474
revset: add support for "wdir()^n"
This patch catches the WdirUnsupported exception raised, and adds support for
wdir^n which will give us the nth parent of the working directory.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 May 2017 00:54:02 +0530] rev 32473
revset: add parentheses after wdir since its a function
wdir was shown in help rather than wdir().
Augie Fackler <augie@google.com> [Mon, 22 May 2017 15:05:18 -0400] rev 32472
cmdutil: avoid redefining write() function in export if possible
Doing less work inside the loop just feels better to me.
Augie Fackler <augie@google.com> [Mon, 22 May 2017 13:34:03 -0400] rev 32471
cmdutil: extract closure that performs the actual export formatting
This simplifies things a little by making the actual act of turning a
revision into patch data a single function. After this, adding
formatter support to `hg export` should be much simpler.
Augie Fackler <augie@google.com> [Mon, 22 May 2017 13:35:22 -0400] rev 32470
cmdutil: use a generator expression instead of a list comprehension
Augie Fackler <augie@google.com> [Sat, 20 May 2017 20:15:05 -0400] rev 32469
cmdutil: rename template param to export to fntemplate
It's actually a template for the filename, not a formatter template.
Augie Fackler <augie@google.com> [Sat, 20 May 2017 17:58:04 -0400] rev 32468
cmdutil: comprehensively document the interface of export
I want to make some improvements here, but in order to make future
patches easier to review I want to document the current state of the
world.
Durham Goode <durham@fb.com> [Mon, 22 May 2017 15:56:47 -0700] rev 32467
tests: hide warning from test-xdg.t
The test-xdg.t test uses the system hgrc because it unsets HGRCPATH. If the
system has an extension enabled that doesn't work with the development version
of Mercurial it prints an 'extension failed to load' warning. Let's just hide
that by piping stderr to /dev/null.
Jun Wu <quark@fb.com> [Mon, 22 May 2017 22:59:40 -0700] rev 32466
policy: define C module versions individually
This allows us to bump the version for a single module without changing all
of them.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 19:43:58 +0200] rev 32465
repoview: rename '_getdynamicblockers' to 'revealedrevs' (API)
Recent mailing list discussion made me realised we could clarify these. We make
the function "public" to encourage extensions to wrap it and we use a more
explicit name that mirror "hideablerevs".
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 19:43:29 +0200] rev 32464
repoview: move '_getdynamicblock' next to 'hideablerevs'
There are the two functions that extensions should use to augment the hidding
logic. It seem better to have them together at the top of the file.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 13:26:17 -0700] rev 32463
python3: allow hgloader to work with lazy loaders
Don't clobber the loader returned from find_spec.
This brings `hg version` down from 0.27 seconds to 0.17.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 12:51:01 -0700] rev 32462
init: turn on demandimport for Python 3.6 and above
This uses the new demandimport implementation for Python 3 introduced in
previous patches.
This doesn't yet enhance performance because it isn't integrated with the
custom source file loader we use on Python 3. We'll integrate the two in
upcoming patches.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 12:23:04 -0700] rev 32461
demandimport: add python 3 implementation
This implementation uses the new importlib finder/loader functionality
available in Python 3.5 and up.
# no-check-commit
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 12:10:53 -0700] rev 32460
demandimport: move ignore list to __init__.py
We're going to use the same ignore list for Python 3.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 13:44:26 -0700] rev 32459
check: check modules in hgdemandimport
A few places only check modules in mercurial and hgext. Add
hgdemandimport to the list in those places.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 12:10:53 -0700] rev 32458
demandimport: move to separate package
In Python 3, demand loading is per-package. Keeping demandimport in the
mercurial package would disable demand loading for any modules in
mercurial.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 12:09:01 -0700] rev 32457
import-checker: add a way to directly import certain symbols
We'll use this for the 'demandimport' symbol in an upcoming patch.
Siddharth Agarwal <sid0@fb.com> [Sun, 21 May 2017 13:34:42 -0700] rev 32456
check-code: allow skipping hasattr check in py3-only code
hasattr is safe in Python 3, and in an upcoming patch we can't use
util.safehasattr.
Jun Wu <quark@fb.com> [Mon, 22 May 2017 01:17:49 -0700] rev 32455
profiling: allow loading profiling extension before everything else
6d642ecf1a89 makes profiler start early without loading extensions. That
makes it impossible for an extension to add customized profilers.
This patch adds a special case: if a profiler is not found but an extension
with the same name could be loaded, load that extension first, and expect it
to have a "profile" contextmanager method. This allows customized profilers
and extension setup time is still profiled.
Jun Wu <quark@fb.com> [Mon, 22 May 2017 00:51:56 -0700] rev 32454
extensions: allow loading a whitelisted subset of extensions
This feature will be used by the next patch.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 22 May 2017 08:49:34 -0700] rev 32453
match: catch attempts to create case-insenstive exact matchers
Exact matchers are only created internally (as opposed to from user
input) based on a set of files that the caller collected before, so
they should always match the list exactly (i.e. case-sensitively).
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 19:29:21 +0200] rev 32452
test: remove aliases forcing date, use default-date
Now that we have the default-date by default and all code have been updated,
remove the old commands alias that forced the date as they are not longer
useful.
Writing tests now should be easier for everyone now that all dates should be
stable.
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 19:28:47 +0200] rev 32451
test: prepare tests for removing date aliases
In the next patch, I'm gonna removing the global command aliases that force
the epoch date but some tests either fail or their output change after that.
Instead I'm copying the needed aliases in the test files that will otherwise
change.
Update test-rebase-obsolete.t because a revision hash is based on the epoch
date after a 'commit --amend' and the output will change after removing date
aliases.
Update test-subrepo-git.t as the git subrepo doesn't use traditional date
mechanisms. I'm not sure that updating the git subrepo to support default-date
make sense. Add the commit alias to the test in order for making it pass after
removing the date aliases globally.
Boris Feld <boris.feld@octobus.net> [Tue, 16 May 2017 18:36:08 +0200] rev 32450
devel: update blackbox to use default-date
Blackbox now obeys the 'devel.default-date' option. As a side effect we can
delete the mock for blackblox related tests.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 12:08:47 +0200] rev 32449
devel: use default-date config field when creating obsmarkers
Also use the default-date when creating obsmarkers. Currently they are created
with the current date and without any option to force their value.
To test the feature, we remove some of the many 'glob' used to match obsmarker
date in the tests.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 16:59:57 +0200] rev 32448
devel: activate default-date in tests
It will make writing future tests more easier for everyone as we won't need to
glob dates anymore in tests.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 12:18:25 +0200] rev 32447
devel: add a config field to force dates to timestamp 0
Add a new config field named default-date under the devel section to force all
implicits date to a specific value. If a explicit date is passed, it will
override the default.
This patch only affect changesets. Other usages (blackbox, obsmarkers) are
updated in later patchs.
The test runner is setting a bunch of alias to force the '--date' argument. We
will replace theses aliases in a later patch.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 12:07:41 +0200] rev 32446
ui: add the possiblity to get a date config field
Add the method configdate to read a date from configuration. It uses the
util.rawparsedate refactored earlier to support all standard date formats.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 12:07:23 +0200] rev 32445
util: refactor util.parsedate to raises ValueError
Split most of util.parsedate in util.rawparsedate and make it raises ValueError instead
of error.Abort.
The util.parsedate function is now just a shell function converting ValueError
to error.Abort for existing users.
I need to parse a date from config in a later patch and use util.rawparsedate
with ui.configwith which expect a convert that raises ValueError.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 22 May 2017 11:08:18 -0700] rev 32444
match: implement __repr__() and update users (API)
fsmonitor and debugignore currently access matcher fields that I would
consider implementation details, namely patternspat, includepat, and
excludepat. Let' instead implement __repr__() and have the few users
use that instead.
Marked (API) because the fields can now be None.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 22 May 2017 10:41:32 -0700] rev 32443
fsmonitor: fix silly "*kwargs" bug in merge.update() override
Everyone knows that it's supposed to be spelled with two asterisks.
It started failing in fad5e299cfc7 (update: accept --merge to allow
merging across topo branches (issue5125), 2017-02-13) because until
then there was only one argument that was covered by the kwargs, so
*kwargs or **kwargs both worked (or at least that's what I think with
my limited understanding of Python).
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 May 2017 20:06:45 +0530] rev 32442
revset: make `hg log -r 'wdir()^'` work (issue4905)
This patch catches the WdirUnsupported exception to support wdir()^.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 May 2017 19:12:06 +0530] rev 32441
revlog: raise WdirUnsupported when wdirrev is passed
revlog.parentrevs() is called while evaluating ^ operator in revsets. When wdir
is passed, it raises IndexError. This patch raises WdirUnsupported if wdir is
passed in the function. The error will be caugth in future patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 May 2017 19:10:37 +0530] rev 32440
error: add a new exception named WdirUnsupported
This series intents to support wdir() predicate with different operators
like ~, ^.
Currently the storage class don't support wdir(). This exception is introduced
so that it can be raised from places where wdir() is passed and is not
supported and we can catch this where we want to support the predicate.
Also throwing an error at low level and catching at some higher level is better
than using if-else especially for perf.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 22:20:59 -0700] rev 32439
match: replace icasefsmatch() function by flag to regular match()
match() will soon gain more logic and we don't want to duplicate that
in icasefsmatch(), so merge the two functions instead and use a flag
to get case-insensitive behavior.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 16:48:02 -0700] rev 32438
match: delete icasefsmatcher now that it's same as matcher
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 15:45:50 -0700] rev 32437
match: pass in normalize() function to matchers
This will let us delete icasefsmatcher.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 16:05:46 -0700] rev 32436
match: don't print explicitly listed files with wrong case (BC)
On case-insensitive file systems, if file A exists and you try to
remove it (or add, etc.) by specifying a different case, you will see
something like this:
$ hg rm a
removing file A
I honestly found this surprising because it seems to me like it was
explicitly listed by the user. Still, there is a comment in the code
describing it, so it is very clearly intentional. The code was added
in baa11dde8c0e (match: add a subclass for dirstate normalizing of the
matched patterns, 2015-04-12).
I'm going to do a lot of refactoring to matchers and the feature
mentioned above is going to get in my way. I'm therefore removing it
for the time being and we can hopefully add it back when I'm done.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 15:25:16 -0700] rev 32435
match: move body of _normalize() to a static function
matcher._normalize() no longer depends on any of the matcher's state,
and making it static will enable further refactoring. Note that the
subdirmatcher subclass calls _normalize(), so we can't remove it
completely.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 15:11:04 -0700] rev 32434
match: pass 'warn' argument to _normalize() for consistency
No other arguments are passed via the matcher's state, so we should
treat 'warn' the consistently. More importantly, this will let us make
it a static function, which will help with further refactoring.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 12 May 2017 23:11:41 -0700] rev 32433
match: replace match class by match function (API)
The matcher class is getting hard to understand. It will be easier to
follow if we can break it up into simpler matchers that we then
compose. I'm hoping to have one matcher that accepts regular
(non-include) patterns, one for exact file matches, one that always
matches (and maybe one that never does) and then compose them by
intersection and difference.
This patch takes a simple but important step towards that goal by
making match.match() a function (and renaming the matcher class itself
from "match" to "matcher"). The new function will eventually be
responsible for creating the simple matchers and composing them.
icasefsmatcher similarly gets a factory function (called
"icasefsmatch"). I also moved the other factory functions nearby.
Augie Fackler <augie@google.com> [Sun, 21 May 2017 18:36:28 -0400] rev 32432
checklink: degrade gracefully on posix when fs is readonly (issue5511)
In the unlucky case, checklink tries to make a new file for the
symlink test to target. If the filesystem is readonly (perhaps due to
permissions in a repo owned by someone else) we just report the
filesystem as not supporting symlinks, since the user probably can't
write anyway.
Gregory Szorc <gregory.szorc@gmail.com> [Fri, 19 May 2017 20:14:31 -0700] rev 32431
revlog: remove some revlogNG terminology
RevlogNG is not such a good name when it is no longer the
newest revlog version. Since we'll soon have revlog version 2,
let's remove some references to it.
Gregory Szorc <gregory.szorc@gmail.com> [Fri, 19 May 2017 20:10:50 -0700] rev 32430
revlog: tweak wording and logic for flags validation
First, the logic around the if..elif..elif was subtly wrong
and sub-optimal because all branches would be tested as long as
the revlog was valid. This patch changes things so it behaves like
a switch statement over the revlog version.
While I was here, I also tweaked error strings to make them
consistent and to read better.
Gregory Szorc <gregory.szorc@gmail.com> [Fri, 19 May 2017 20:01:35 -0700] rev 32429
tests: tests for revlog version and flags loading
We didn't have explicit test coverage of these branches.
Better late than never.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 13:32:07 +0200] rev 32428
perf: allow to clear the obsstore in 'perfvolatilesets'
Loading the obsstore can become a large part of the time necessary to compute
the important volatile set. We add a flag purging all known obsstore related
data.
For example, computing the 'bumped' set currently requires reading the full
obsstore, so timing greatly differ with or without that flag:
Without:
! bumped
! wall 0.005047 comb 0.000000 user 0.000000 sys 0.000000 (best of 446)
With:
! bumped
! wall 0.512367 comb 0.510000 user 0.480000 sys 0.030000 (best of 15)
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 13:49:48 +0200] rev 32427
obsolete: test an important corner case
Receiving markers affecting changeset we'll receives later is legitimate and
not so uncommon case. Working on cache highlighted that this was only testing
in the evolve extension. We add a test for this case in core.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 18 May 2017 22:47:42 -0700] rev 32426
largefiles: replace always() method, not _always field
We will soon have matchers that don't have an _always field, so
largefiles needs to stop assuming that they do. _always is only used
by always(), so we safely replace that method instead.
Augie Fackler <augie@google.com> [Sun, 21 May 2017 02:45:32 -0400] rev 32425
merge with stable
Yuya Nishihara <yuya@tcha.org> [Sun, 21 May 2017 13:41:01 +0900] rev 32424
cext: mark constant variables
Yuya Nishihara <yuya@tcha.org> [Sun, 21 May 2017 13:35:19 +0900] rev 32423
cext: move util.h to cext tree
Since util.h isn't useful in plain C module, it should be placed in CPython
extension directory.
Yuya Nishihara <yuya@tcha.org> [Sun, 21 May 2017 13:31:27 +0900] rev 32422
cext: move back finalization of dirstateTupleType where it should be
Martin von Zweigbergk <martinvonz@google.com> [Sat, 20 May 2017 22:27:52 -0700] rev 32421
cleanup: reuse existing wctx variables instead of calling repo[None]
Incidentally, this apparently means we load .hgsub one time less as
well, which affects a test case.
Augie Fackler <augie@google.com> [Thu, 18 May 2017 16:43:56 -0400] rev 32420
localrepo: extract bookmarkheads method to bookmarks.py
This method is only used internally by destutil, and it's obscure
enough I'm willing to just move it without a deprecation warning,
especially since the new method has more constrained functionality.
Design-wise I'd also like to get active bookmark handling folded into
the bookmark store, so that we don't squirrel away an extra attribute
for the active bookmark on the repository object.
Augie Fackler <augie@google.com> [Sat, 20 May 2017 20:50:29 -0400] rev 32419
tests: avoid renamed files triggering check-commit failures
I had to flag some revisions to not undergo check-commit scrutiny
today to get the tests to pass, because they renamed files that had
existing failures which we're not cleaning up. Let's prevent that in
the future by using the extended git diff format to elide moved code.
Jun Wu <quark@fb.com> [Sat, 29 Apr 2017 21:39:47 -0700] rev 32418
dispatch: make request accept additional reposetups
chg needs special logic around repo object creation (like, collecting and
reporting repo path to the master server). Adding "reposetup" to
dispatch.request seems to be an easy and reasonably clean way to allow that.
Gregory Szorc <gregory.szorc@gmail.com> [Sat, 20 May 2017 14:01:05 -0700] rev 32417
cext: extract revlog/index parsing code to own C file
parsers.c is ~3000 lines and ~2/3 of it is related to the revlog
index type.
We already have separate C source files for directory utilities
and manifest parsing. I think the quite unwieldy revlog/index
parsing code should be self-contained as well.
I performed the extraction as a file copy then removed content
from both sides in order to preserve file history and blame.
As part of this, I also had to move the hexdigit table and
function to a shared header since it is used by both parsers.c
and revlog.c
# no-check-commit
Yuya Nishihara <yuya@tcha.org> [Thu, 04 May 2017 17:13:12 +0900] rev 32416
debugcommands: use temporary dict for its command table
Instead, load the table by commands.py so the debug commands should always
be populated. The table in debugcommands.py is unnamed so extension authors
wouldn't be confused to wrap debugcommands.table in place of commands.table.
Yuya Nishihara <yuya@tcha.org> [Sun, 14 May 2017 16:42:16 +0900] rev 32415
commands: move debugcommands and debugcomplete back to commands module
These commands depend heavily on the commands table, so it doesn't make
much sense to isolate them to debugcommands.py. This helps eliminating
the future import cycle.
Yuya Nishihara <yuya@tcha.org> [Sun, 14 May 2017 16:19:47 +0900] rev 32414
commands: move templates of common command options to cmdutil (API)
The goal is to get rid of the debugcommands -> commands dependency.
Since globalopts is the property of the commands, it's kept in the commands
module.
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:29:53 +0900] rev 32413
import-checker: drop workaround for pure modules
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:28:52 +0900] rev 32412
policy: drop custom importer for pure modules
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:23:56 +0900] rev 32411
parsers: switch to policy importer
# no-check-commit
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:18:58 +0900] rev 32410
mpatch: switch to policy importer
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:15:49 +0900] rev 32409
diffhelpers: switch to policy importer
# no-check-commit
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:12:50 +0900] rev 32408
bdiff: switch to policy importer
# no-check-commit
Yuya Nishihara <yuya@tcha.org> [Sat, 13 Aug 2016 12:08:23 +0900] rev 32407
base85: switch to policy importer
Yuya Nishihara <yuya@tcha.org> [Fri, 12 Aug 2016 11:35:17 +0900] rev 32406
osutil: switch to policy importer
"make clean" is recommended to test this change, though C API compatibility
should be preserved.
Yuya Nishihara <yuya@tcha.org> [Fri, 12 Aug 2016 11:30:17 +0900] rev 32405
policy: add helper to import cext/pure module
These functions are sysstr API since __import__() and getattr() hate byte
strings on Python 3.
There's a minor BC, which is ImportError will be raised if invalid
HGMODULEPOLICY is specified. I think this is more desired behavior.
We're planning to add strict checking for C API compatibility. This patch
includes the stub for it.
Yuya Nishihara <yuya@tcha.org> [Sat, 20 May 2017 15:09:14 +0900] rev 32404
demandimport: strictly check missing locals argument
locals may be an empty dict.
Augie Fackler <augie@google.com> [Thu, 18 May 2017 18:01:48 -0400] rev 32403
localrepo: mark walk convenience method as deprecated (API)
Augie Fackler <augie@google.com> [Thu, 18 May 2017 18:01:01 -0400] rev 32402
debugcommands: use repo[None].walk instead of repo.walk
Augie Fackler <augie@google.com> [Thu, 18 May 2017 18:00:52 -0400] rev 32401
cmdutil: use repo[None].walk instead of repo.walk
Augie Fackler <augie@google.com> [Thu, 18 May 2017 18:00:38 -0400] rev 32400
largefiles: use repo[None].walk instead of repo.walk
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:43:30 -0700] rev 32399
parsers: add version to help detect breaking binary changes
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:36:59 -0700] rev 32398
osutil: add version to help detect breaking binary changes
See the previous patch for why.
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:38:36 -0700] rev 32397
mpatch: add version to help detect breaking binary changes
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:40:13 -0700] rev 32396
diffhelpers: add version to help detect breaking binary changes
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:45:48 -0700] rev 32395
base85: add version to help detect breaking binary changes
Jun Wu <quark@fb.com> [Tue, 25 Apr 2017 17:34:41 -0700] rev 32394
bdiff: add version to help detect breaking binary changes
Previously, we have no way to detect if a compiled .so file could be used or
not, and blindly load it if it exists. Usually we carefully maintain
compatibility of .so and fallback to pure code gracefully. But if we stick
to the rules, certain nice changes will be impossible to make in a clean
way.
This patch adds a "version" constant to the module so we can detect
inconsistency and take appropriate actions (warn, abort, fallback to pure,
run make automatically) in module loader.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 03:10:23 +0200] rev 32393
obsmarker: add an experimental flag controlling "operation" recording
It seems better to introduce the experiment behind a flag for now as there are
multiple concerns around the feature:
* Storing operation increase the size of obsolescence markers significantly
(+10-20%).
* It performs poorly when exchanging markers (cannot combine command names,
command name might be unknown remotely, etc)
Gregory Szorc <gregory.szorc@gmail.com> [Fri, 19 May 2017 19:46:45 -0700] rev 32392
run-tests: remove references to Python 2.6
These are the obvious ones. There is tons of code in this file
implementing features from unittest that weren't present in
Python 2.6. But that's for other patches.
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:13:32 -0400] rev 32391
dirstate: mark {begin,end}parentchange as deprecated (API)
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:11:24 -0400] rev 32390
merge: migrate to context manager for changing dirstate parents
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:11:14 -0400] rev 32389
localrepo: migrate to context manager for changing dirstate parents
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:11:07 -0400] rev 32388
context: migrate to context manager for changing dirstate parents
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:11:01 -0400] rev 32387
rebase: migrate to context manager for changing dirstate parents
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:10:53 -0400] rev 32386
mq: migrate to context manager for changing dirstate parents
Augie Fackler <augie@google.com> [Thu, 18 May 2017 17:10:30 -0400] rev 32385
dirstate: introduce new context manager for marking dirstate parent changes
Kostia Balytskyi <ikostia@fb.com> [Fri, 19 May 2017 17:01:34 -0700] rev 32384
contrib: make editmergeps able to work with notepad++
Notepad++ has a different FIRSTLINE argument, so needs special handling.
Kostia Balytskyi <ikostia@fb.com> [Fri, 19 May 2017 17:00:55 -0700] rev 32383
contrib: make editmergeps able to work with Windows GUI editors
Using Start-Process -Wait makes it wait until the process finishes,
which is necesssary for Windows GUI applications. My short testing
also demonstrated that it does not hurt with command line vim.
Yuya Nishihara <yuya@tcha.org> [Sat, 09 Jan 2016 23:24:52 +0900] rev 32382
extensions: show deprecation warning for the use of cmdutil.command
Since this is a fundamental API for extensions, we set 1-year period until
actually removing it.
Yuya Nishihara <yuya@tcha.org> [Sat, 13 May 2017 15:41:50 +0900] rev 32381
extensions: prohibit registration of command without using @command (API)
Detect the problem earlier for better error indication. I'm tired of teaching
users that the mq extension is not guilty but the third-party extension is.
https://bitbucket.org/tortoisehg/thg/issues?q=%27norepo%27
Yuya Nishihara <yuya@tcha.org> [Sun, 14 May 2017 15:46:45 +0900] rev 32380
extensions: optionally print hint on import failure
Test will be added by the next patch.
Yuya Nishihara <yuya@tcha.org> [Sun, 14 May 2017 15:41:27 +0900] rev 32379
error: add hint to ProgrammingError
As the hint isn't shown by the default exception handler, we need to print
it manually. I've copied the "** " style from _exceptionwarning().
Yuya Nishihara <yuya@tcha.org> [Mon, 08 May 2017 22:14:56 +0900] rev 32378
registrar: unindent superfluous "if True" block
Yuya Nishihara <yuya@tcha.org> [Mon, 08 May 2017 22:08:40 +0900] rev 32377
registrar: switch @command decorator to class
It overrides _funcregistrarbase._doregister() since the structure of the
command table is quite different.
Yuya Nishihara <yuya@tcha.org> [Sat, 09 Jan 2016 23:07:20 +0900] rev 32376
registrar: move cmdutil.command to registrar module (API)
cmdutil.command wasn't a member of the registrar framework only for a
historical reason. Let's make that happen. This patch keeps cmdutil.command
as an alias for extension compatibility.
Yuya Nishihara <yuya@tcha.org> [Sat, 13 May 2017 17:53:55 +0900] rev 32375
gendoc: make sure locale path is set before loading any modules
Otherwise some messages wouldn't be translated depending on when the util
was loaded.
Wez Furlong <wez@fb.com> [Thu, 18 May 2017 12:49:10 -0700] rev 32374
fsmonitor: don't attempt state-leave if we didn't state-enter
The state-enter command may not have been successful; for example, the watchman
client session may have timed out if the user was busy/idle for a long period
during a merge conflict resolution earlier in processing a rebase for a stack
of diffs.
It's cleaner (from the perspective of the watchman logs) to avoid issuing the
state-leave command in these cases.
Test Plan:
ran
`hg rebase --tool :merge -r '(draft() & date(-14)) - master::' -d master`
and didn't observe any errors in the watchman logs or in the output from
`watchman -p -j <<<'["subscribe", "/data/users/wez/fbsource", "wez", {"expression": ["name", ".hg/updatestate"]}]'`
Wez Furlong <wez@fb.com> [Thu, 18 May 2017 12:48:07 -0700] rev 32373
fsmonitor: acquire localrepo.wlock prior to emitting hg.update state
we see some weird things in the watchman logs where the mercurial
process is seemingly confused about which hg.update state it is publishing
through watchman.
On closer examination, we're seeing conflicting pids for the clients involved
and this implies a race.
To resolve this, we extend the wlock around the state-enter/state-leave
events that are emitted to watchman.
Test Plan:
Some manual testing:
In one window, run this, and then checkout a different rev:
```
$ watchman -p -j <<<'["subscribe", "/data/users/wez/fbsource", "wez", {"expression": ["name", ".hg/updatestate"]}]'
{
"version": "4.9.0",
"subscribe": "wez",
"clock": "c:1495034090:814028:1:312576"
}
{
"state-enter": "hg.update",
"version": "4.9.0",
"clock": "c:1495034090:814028:1:312596",
"unilateral": true,
"subscription": "wez",
"metadata": {
"status": "ok",
"distance": 125,
"rev": "a1275d79ffa6c58b53116c8ec401c275ca6c1e2a",
"partial": false
},
"root": "/data/users/wez/fbsource"
}
{
"root": "/data/users/wez/fbsource",
"metadata": {
"status": "ok",
"distance": 125,
"rev": "a1275d79ffa6c58b53116c8ec401c275ca6c1e2a",
"partial": false
},
"subscription": "wez",
"unilateral": true,
"version": "4.9.0",
"clock": "c:1495034090:814028:1:312627",
"state-leave": "hg.update"
}
```
Tailed the watchman log file and looked for invalid state assertion errors,
then ran my `rebase-all` script to update/rebase all of my heads.
Didn't trigger the error condition (but couldn't reliably trigger it previously
anyway), and the output captured above shows that the states are being emitted
correctly.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 13:12:42 +0200] rev 32372
obsolete: move the 'isenabled' function at the top of the file
That is a simple and important function so having it at the top next to the
related constant seems better.