tests: use graph log in test-phases.t It's hard to tell that the phases are ordered correctly without seeing the graph.

commit: move check for incompatible args earlier I think it makes sense to check the command line arguments as early as possible, so we don't have to wait for a repo lock to tell the user that they passed invalid arguments.

delta-find: add a delta-reuse policy that blindly accepts incoming deltas When this policy is set, incoming deltas are blindly accepted without regard for the validity of the chain they build.

delta-find: add a `delta-reuse-policy` on configuration `path` That option allows to control the behavior on a per-path basis, opening the way to treating pulls from central servers differently than other operations.

changegroup: add `delta_base_reuse_policy` argument The argument available through function from changegroup.apply to `revlog.apply` allow to override the revlog configuration in terms of delta-base-reuse policy when searching for a delta to store a revision. It will be put to use in the next changesets.

bundleoperation: optionnaly record the `remote` that produced the bundle We have the information at hand, and the peer now have knownledge of its `path` object, which constaints useful behavior configuration. So the simpler seems to be to pass that object around so it can be used if needed.

delta-find: add a test checking various simple behavior There are enough work happening in this area that it is worth having a dedicated test for it. So far we add to small test checking that the "best" parent is picked as the delta base and that this behavior can be controlled during commit and unbundle.

peer: pass the `path` to the statichttp peer We now have all peer able to receive and store a `path` object. Hooray.

peer: get the `path` object down to the sshpeer Same logic as the other peers.

logexchange: use the proper accessors to get the remote url There is an official method, let us use it. this will prevent a crash when the private attribute disappear.

peer: get the `path` object down to the httppeer One more peer with a path stored.

path: fix `url.copy` dropping the port The copy method have been wrong for a while, but the new code reveals it.

peer: pass the `path` object to `make_peer` We don't do anything with it yet, but we can start implementing it for each peer type starting now.

path: allow to copy a path while adjusting the url This will be used by `scheme` in the next changesets.

peer: store the path object used to build a peer from a repo This is the simplest case, we so starts with it.

peer: build a `path` object on the fly when needed So now, we always have a `path` object around when building the peer

peer: have `repo.peer` take an optional `path` argument We are ready to start to actually set the value now.

peer: add a `path` attribute to peer It will start being set in the coming changesets.

peer: have a common constructor and use it For now it does not do much, but we will extend it to also store a path object soon.

peer: use a dedicated name for the `peer` constructor We want to change the argument it takes, so we rather make them different function.

peer: dissolve `_peerlookup` into its last two callers This is about to need more changes and the function won't be useful. We do it early to clarify later changes.

peer: stop having a `peer()` method on `peer()` This is already a peer, why do you want a peer if you already have one.

clone: explicitly detect the need to fetch a peer Instead of having `peer()` method on all `peer()` for this usecase, we could simply handle it explicitly.

addbranchrevs: explicitly detect the need to fetch a peer Instead of having `peer()` method on all `peer()` for this usecase, we could simply handle it explicitly.

path: pass `path` to `peer` in `hg clone` We directly use the `path` object to build the `peer` object.

path: use `get_clone_path_obj` in share The return is simpler to use, and this mean less user for the old function. We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in mq We directly use the `path` object to build the `peer` object. There is one case where we don't. We should fix that at the same time as we fix the sub-repo cases.

path: use `get_clone_path_obj` in _getlocal We don't need to feed the `path` object to a `peer` object, but using an higher level function is simpler here (e.g. no subscript access, explicit attribute access).

path: pass `path` to `peer` in `hg init` We directly use the `path` object to build the `peer` object.

path: add a `get_clone_path_obj` function Same logic as the `get_unique_pull_path_obj` function, this give access to the `path` object directly.

path: simplify the implementation of `get_clone_path` We can simply use the logic from `get_unique_pull_path_obj` now.

path: clarify document of `get_clone_path` This return a url as `bytes`, not a `path` object.

path: pass `path` to `peer` in `hg perf::discovery` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in remotefilelog's tests We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg fastannotate` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in infinitepush We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in largefiles We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in narrow We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg fetch` We directly use the `path` object to build the `peer` object.

path: use `get_unique_pull_path_obj` in `hg relink` This is not really needed, but that help removing caller of the older function.

path: pass `path` to `peer` in `hg transplant` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg debugbackupbundle` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg debugssl` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg debugdiscovery` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `remote(...)` revset We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg summary` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg identify` We directly use the `path` object to build the `peer` object.

path: introduce a `get_unique_pull_path_obj` function Unlike the previous one, `get_unique_pull_path`, this function return the `path` object, opening more option for the caller. note that this highlight we don't actually need the `repo` argument to `get_pull_paths`, however changing the API would be annoying for third party extensions.

path: simplify the `get_unique_pull_path` function Simply delegate the search to `get_pull_paths` and check how many we got.

path: remove outdated documentation point from `get_unique_push_path` This is no longer true.

path: pass `path` to `peer` in `hg pull` We directly use the `path` object to build the `peer` object. We don't use it for sub-repositories yet, which will have to be fixed at some point.

path: pass `path` to `peer` in `hg incoming` We directly use the `path` object to build the `peer` object. We don't use it for sub-repositories yet, which will have to be fixed at some point.

path: pass `path` to `peer` in `hg incoming` bookmark logic We directly use the `path` object to build the `peer` object. Touching this code highlighted that we never honor the branches' information of when doing bookmark level incoming checks.

path: remove outdated documentation point from `get_unique_pull_path` This is no longer true.

path: update `get_unique_pull_path` to point out it returns a url Unlike other functions in this module it returns a url as `bytes` and not a `path` object. Let us point it out in the doc.

changelog-v2: fix the docket `struct` The previous definition used `L` which is actually 4 bytes, while the documentation and intend was to use `Q`, i.e. 8 bytes.

path: pass `path` to `peer` in infinite push We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg histedit` We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in the `outgoing` revset We directly use the `path` object to build the `peer` object.

path: pass `path` to `peer` in `hg summary` We directly use the `path` object to build the `peer` object.