keepalive: use absolute_import

context: use absolute_import

lsprofcalltree: use absolute_import

byterange: use absolute_import There were a lot of imports scattered around this file. They have been consolidated at the top of the file where they belong.

dirstate: use absolute_import

manifest: use absolute_import

pvec: use absolute_import

ui: remove unreachable code

mercurial.spec: remove execute bit

tests: add execute bit and fix shbang line

i18n: add execute bit to check-translation.py

doc: add execute bit and fix shbang line for gendoc.py

contrib: add execute bit for fixpax.py

contrib: add execute bit for check-py3-compat.py

perf: make start revision configurable for perfrevlog This will help isolate performance characteristics of delta chains.

perf: use standard arguments for perfrevlog We have a convention of using -c|-m|FILE elsewhere for reading from revlogs. Use it for `hg perfrevlog`. While I was here, I also added a docstring to document what this command does, as "perfrevlog" is ambiguous.

test-extension: do not depend on demandimport (issue5012) When demandimport is disabled, the test will fail because extroot/foo.py uses import outside PYTHONPATH. This is bad since we have a PyPy migration plan and it does not support demandimport. Fix by setting PYTHONPATH.

commands: split notes into note containers

remove: quote --force in never deletes note Split Note into a note container

import: reword no hunks partial note Split Note into a note container

merge: reword help to use See help resolve

py3compat: use absolute_import

patch: use absolute_import

mdiff: use absolute_import

scmposix: use absolute_import

scmutil: use absolute_import

scmwindows: use absolute_import

store: use absolute_import

help: use absolute_import

test-commit-interactive: updates for the no-execbit case This goes with c84a07530040 and 14b184263846.

test-fileset: conditionalize output with symlink

commands: the first word of each note should be capital or `hg`

revlog: avoid string slice when decompressing u* chunks Revlog chunks can be stored uncompressed. If the first byte of the raw data is \0, we store the data as is. Else we prefix it with 'u'. Before, we performed a string slice to strip out the 'u' prefix. With this patch, we use a buffer to avoid an extra memory copy and associated garbage collection overhead. I was unable to verify any performance impact of this patch. For both mozilla-central and the hg repos, the number of manifest revisions with 'u' prefixes is very small - under 1%. So this change likely isn't called enough to have an impact on manifest reading. However, the reasoning behind this change is solid, so it should be safe.

osutil: implement pure version of recvfds() for PyPy This is less portable than the C version, but PyPy can't load CPython extensions. So for now, this will be used on PyPy. I've tested it on Linux amd64 and Mac OS X.

osutil: implement recvmsg() of SCM_RIGHTS for chg command server It will be used to attach client's stdio files to a background chg command server. The socket module of Python 2.x doesn't provide recvmsg(). This could be implemented by using ctypes, but it would be less portable than the C version because the handling of socket ancillary data heavily depends on preprocessor. Also, some length fields are wrongly typed in the Linux kernel.

cleanup: back out performance hacks amended into previous commit

commands: consistently indent notes 3 spaces most notes have 3 spaces for indentation, these had 2...

perf: add perfrevlogrevision As part of investigating performance improvements to revlog reading, I needed a mechanism to measure every part of revlog reading so I knew where time was spent and how effective optimizations were. This patch implements a perf command for benchmarking the various stages of reading a single revlog revision. When executed against a manifest revision at the end of a 30,000+ long delta chain in mozilla-central, the command demonstrates that ~80% of time is spent in zlib decompression.

commands: use revlog._deltachain in debugdeltachain We have a nice API now. Use it. This does mean we introduce an extra index lookup for each revision. Considering this is a debug command, the overhead should be acceptable. We could add the chain size to revlog._deltachain(). However, that feels like avoidable overhead.

revlog: refactor delta chain computation into own function This code is already written in multiple locations. While this code needs to be fast and extracting it to its own function adds overhead, code paths reading delta chains typically read, decompress, and do binary patching on revlog data from the delta chain. This other work (especially zlib decompression) almost certainly accounts for a lot more time than the overhead of introducing a Python function call. So I'm not worried about the performance impact of this change.

perf: call clearcaches() in perfmanifest The old code only partially cleared the caches. Now that we have a comprehensive method for wiping all caches, let's call it. This appears to introduce a marginal regression in `hg perfmanifest` on mozilla-central. This is good because the new result is more accurate since caches aren't being used.

manifest: implement clearcaches() The manifest implements its own caches in addition to revlog's. Extend the base clearcaches() to wipe these as well.

revlog: make clearcaches() more effective clearcaches() was added several years ago in e8d37b78acfb as part of implementing a perf command. Since revlog instances have many caches and since the spirit of this mostly unused method is to facilitate performance testing, I think it's appropriate for all the revlog's caches to get cleared when it is called.

fileset: detect unintentional existing() invocation at runtime A fileset predicate can invoke 'matchctx.existing()' successfully, even if it isn't marked as "existing caller". It is aborted only in some corner cases: e.g. there were one deleted file in the working directory (see 8a0513bf030a for detail). This patch makes 'matchctx.existing()' invocation abort if not '_existingenabled', which is true only while "existing caller" running. After this changes, non-"existing caller" predicate function is aborted immediately, whenever it invokes 'matchctx.existing()'. This prevent developer from forgetting to mark a predicate as "existing caller". BTW, unintentional 'matchctx.status()' invocation can be detected easily without any additional trick like this patch, because it returns 'None' if a predicate isn't marked as "status caller", and referring field (e.g. '.modified') of it is always aborted.

fileset: use set instead of list to mark predicates for efficiency (API) This reduces cost of examining whether given predicate calls 'matchctx.status()' or 'matchctx.existing()' in 'getfileset()' at runtime. This kind of examination is used also in subsequent patch, which detects unintentional 'matchctx.existing()' invocation per each predicate evaluation.

fileset: use decorator to mark a predicate as "existing caller" This can localize changes for adding (or removing) an "existing caller" predicate function in source code.

fileset: use decorator to mark a predicate as "status caller" Before this patch, predicates calling 'matchctx.status()' are listed up by immediate list value in 'getfileset()'. This prevents 3rd party extensions from adding specific predicate calling 'matchctx.status()'. This uses decorator to mark a predicate as "status caller". This can also localize changes for adding (or removing) a "status caller" predicate function in source code.

fileset: use decorator to mark a function as fileset predicate Using decorator can localize changes for adding (or removing) a fileset predicate function in source code. It is also useful to pick predicates up for specific purpose. For example, subsequent patches marks predicates as "call status" or "use existing" via decorator. To avoid (1) redundancy between "predicate name" and (the beginning of) help document, and (2) accidental typo of help document, this patch also makes decorator put predicate declration into the beginning of help.

fileset: treat encoding and eol as the predicate calling _existing Before this patch, predicate function 'encoding' and 'eol' aren't listed up in '_existingcallers', even though they invoke 'existing()'. This causes unexpected failure of these predicate, if there is a (manually) deleted file in the working directory. 8a0513bf030a and 3ce3f2b059a1 seem to overlook putting already existing 'encoding' or newly introduced 'eol' into '_existingcallers'. This patch also changes order of fileset "eol(unix)" output in test, because "existing caller" predicates show "A(dded)" files before "C(lean)" ones.

rebase: mention conflict in documentation instead of merge

rebase: simplify documentation about heads

rebase: simplify documentation about --keep Also include a warning about bookmarks

rebase: simplify documentation about selecting commits to rebase

rebase: simplify documentation about public commits add reference to graft

verify: clean up weird error/warning lists Nested functions in Python are not able to assign to variables in the outer scope without something like the list trick because assignments refer to the inner scope. So, we formerly used a list to give an object to assign into. Now that error and warning are object members, the [0] hack is no longer needed.

diff: clarify comparison as first parent

histedit: add progress support

verify: remove unreachable code to reraise KeyboardInterrupt KeyboardInterrupt should never be caught as it doesn't inherit Exception in Python 2.5 or later. And if it was, "interrupted" would be printed twice. https://docs.python.org/2.7/library/exceptions.html#exception-hierarchy

merge with stable

verify: move exc() function onto class This is part of an effort to make verify more modular so extensions can hook into it.