transplant: convert applied() algorithm from nodes to revs After a recent switch from revlog.reachable to revlog.ancestors, clean up the code a bit to use revs rather than nodes.

revlog: remove reachable and switch call sites to ancestors This change does a trivial conversion of callsites to ancestors. Followon diffs will switch the callsites over to revs.

revlog: add incancestors, a version of ancestors that includes revs listed ancestors() returns the ancestors of revs provided. This func is like that except it also includes the revs themselves in the total set of revs generated.

scmutil: change canonpath to use util.samefile (issue2167) Fixes (on Windows in cmd.exe): $ hg -R v:\x\a status V:\x\a\bar abort: V:\x\a\bar not under root where v:\x\a is a valid repository with a checked-out file "bar" (Note the difference in casing: "v:\" versus "V:\")

win32.py: let samefile and samedevice work on directories too

rebase: do not add second parent to rebased changeset (drop detach option) (BC) Rebase now behaves as if --detach was always passed. Non-merges are rebased as non-merges, regardless of their parent being an ancestor of the destination. Merges will usually be rebased as merges unless both of their parents are ancestors of the destination, or one of their parents is pruned when rebased. This only alters the behavior of rebase when using the --source/--rev options. --detach option is deprecated. All test changes were carefully validated.

zsh completion: catch up with 2.2 commands and options * add completion for phase and graft core commands * add completion for rebase extension * add new options for already defined commands: * commit --amend * import --bypass * manifest --all * merge --tool * revert -C (short for --no-backup) * qpush --exact [mq] * email --body [patchbomb]

revset: add a utility for obtaining the source of a given rev graft, transplant and rebase all embed a different type of source marker in extra, and each with a different name. The current implementation of each is such that there will never be more than one of these markers on a node. Note that the rebase marker can only be resolved if the source is still present, which excludes the typical rebase usage (without --keep) from consideration (unless the resulting bundle in strip-backup is overlayed). There probably isn't any reason to use rebase --keep as a substitute for transplant or graft at this point, but maybe there was at one point and there are even a few rebases in the hg repo, so it may be of historical interest.

revset: add a predicate for finding converted changesets This selects changesets added because of repo conversions. For example hg log -r "converted()" # all csets created by a convertion hg log -r "converted(rev)" # the cset converted from rev in the src repo The converted(rev) form is analogous to remote(id), where the remote repo is the source of the conversion. This can be useful for cross referencing an old repository into the current one. The source revision may be the short changeset hash or the full hash from the source repository. The local identifier isn't useful. An interesting ramification of this is if a short revision is specified, it may cause more than one changeset to be selected. (e.g. converted(6) matches changesets with a convert_revision field of 6e..e and 67..0) The convert.hg.saverev option must have been specified when converting the hg source repository for this to work. The other sources automatically embed the converted marker.

merge with stable

merge with i18n

i18n-de: More corrections for translation of default, and other translations

i18n-de: translate default as Vorgabe

i18n-de: Update strings, translated many fuzzy strings

i18n-pt_BR: synchronized with 0fdd8193c8b5

merge with i18n

i18n-de: More corrections for translation of default, and other translations

tests: remove execute permission from two unified test files

graft: allow -r to specify revisions

consistency: use REV instead of REVISION

export: add optional -r to synopsis It is not already covered by [OPTION]..., because in this case REV... would need to be marked optional.

strip: add optional -r to synopsis

qimport: use [FILE]... because if -r is used no file is needed

mq: abort if no files or revisions are specified for qimport

tests: convert some hghave unix-permissions to #if

tests: run test-walk.t on windows A couple of detours and changed paths are used to work around msys path conversion.

tests: better testing of 'glob:glob' in test-walk.t

tests: move tests in test-walk.t using ':' in filenames to conditional section eol-in-paths will also protect against testing ':' in filenames on FAT.

tests/printenv.py: eliminate trailing spaces on output

tests: fix test-i18n.t after translation update

merge with i18n

Corrected hyphenation, translated subrepo help and other strings

i18n-de: translate default as Vorgabe

i18n-de: Update strings, translated many fuzzy strings

i18n-ru: synchronized with 2255950e1f76

tests: remove hghave system-sh from test-pending.t The alternative would have been to add a unix-permissions requirement.

tests: use hghave eol-in-paths to test for support for ':' in filenames and " " It is an approximation but seems to work ok ... and testing that 'foo:bar' creates a real file and not just a resource fork is not completely trivial.

tests: use a different evil name in test-hgweb-raw.t The test used a filename with ':' which prevented the test from running on Windows and FAT. It now uses a filename with space and '%' and will thus still exercise proper url escaping.

tests: add some missing #if's / hghave requirements Seen on Linux with FAT.

tests: introduce hghave hardlinks Some tests can't be run on FAT filesystems because it doesn't support hardlinks.

tests/hghave: test that the inotify unix socket actually can be created Inotify do not work on FAT filesystems.

tests/hghave: test that a fifo actually can be created on the filesystem Some tests were failing on FAT filesystems.

tests/hghave: consistently use dir='.', prefix=tempprefix for tempfiles Some feature tests were done in the wrong directory and could thus give the wrong result.

test-merge-tools: adapt for Windows

tests/hghave: extract hghave.py hghave is degraded to a bare script, moving the functions to hghave.py so they can be shared later on.

test-alias: adapt for Windows The test used 'echo' to test '!' style aliases. On Windows 'echo' is handled by cmd and thus behaves very differently from the 'normal' echo command. The simple workaround used here for using the same alias on all platforms is to use 'printf' instead. Msys 'printf' will also handle sh quoting and escaping in cmd. Environment variable expansion with sh syntax is handled by launching sh.

test-hook: adapt for Windows

tests/printenv.py: replace \ with / in output saves us quite a bunch of (glob)'s

test-clone-pull-corruption: adapt for Windows

test-merge-tools: inline pointless domerge function This also uncovers the exit codes of the 'hg merge' calls

test-bisect: adapt for Windows

test-journal-exists: use #if

merge with stable

acl: user docs for the "!" prefix in user or group names

acl: use of "!" prefix in user or group names The "!" prefix allows you to prevent anyone except a given user or group to push changesets in a given branch or path. This patch enables a use case suggested by a user (Julien Bonnet): There's a branch that only a given user (or group) should be able to push to, and you don't want to restrict access to any other branch that may be created. With the "!" prefix, you simply deny access to "!givenuser" (or "!@givengroup").

parsers: add a C function to pack the dirstate This is about 9 times faster than the Python dirstate packing code. The relatively small speedup is due to the poor locality and memory access patterns caused by traversing dicts and other boxed Python values.

test-convert: disable autocrlf for git

debugwalk: observe ui.slash config option

test-commit: remove extra cd .. This specific cd .. leaves the base directory of the test ($TESTTMP). Removing it avoids that test artifacts (e.g. files) are created outside of the base directory.

merge with stable

notify: various fixes to docstring Typo corrections, grammar adjustments, clarity improvements.

help: sort results from keyword search

tests: reintroduce globs in test-convert-authormap.t They are needed on windows and were accidentally removed in eaf6a6d7f015.

merge with stable

merge with crew

tests: removed unneeded section in acl configuration: 'extensions' Declaring 'acl' in the [extensions] section doesn't change anything.

config: use util.compilere to compile regexps

matcher: use re2 bindings if available There are two sets of Python re2 bindings available on the internet; this code works with both. Using re2 can greatly improve "hg status" performance when a .hgignore file becomes even modestly complex. Example: "hg status" on a clean tree with 134K files, where "hg debugignore" reports a regexp 4256 bytes in size. no .hgignore: 1.76 sec Python re: 2.79 re2: 1.82 The overhead of regexp matching drops from 1.03 seconds with stock re to 0.06 with re2. (For comparison, a git repo with the same contents and .gitignore file runs "git status -s" in 1.71 seconds, i.e. only slightly faster than hg with re2.)

help: fix extension commands help in keyword search This patch fixes the synopsis shown for extension commands in keyword search results. A previous patch erroneously caused the extension synopsis to be shown instead. Test cases for keyword search are missing, so I added a one.

localrepo: lowercase "unexpected response" message

ui: lowercase "no username" warning

ui: lowercase "not trusting file" warning message

ui: lowercase ConfigError warning message

cmdutil: lowercase finddate status message This message is output by 'hg revert -d DATE' and 'hg update -d DATE'.

bisect: lowercase status message

serve: lowercase "no repo here" message

debuginstall: lowercase status messages

dispatch: lowercase --time message

win32text: lowercase warning message

patchbomb: lowercase status messages

purge: lowercase messages

mq: lowercase warning messages

largefiles: lowercase messages

gpg: lowercase messages

fetch: lowercase abort message

convert: lowercase status and abort messages

churn: lowercase message

test-parse-date: move remaining date parsing tests from test-log

test-log: removed tests already covered by test-parse-date

test-parse-date: remove cruft from 8c6f823efcc9 The test contained what looks like a copy-paste mistake.

merge with stable

archive: make progress only show files that are actually archived Before this, files that are excluded (or not included) were shown when using progress bar or --debug. Reported by Andrew Shadura.

test-hardlinks: enable for Windows

test-command-template: enable for Windows

test-rollback: enable for Windows but without the part that needs serve

test-init: enable for Windows On Windows, we can't create a directory with the name " ", as that is not a valid name for a directory.