test-pathencode: accept --seed parameter in hex as well test-pathencode.py outputs the seed value in hex if it finds a deviation. This change allows to specify the seed value as a command line parameter for test-pathencode.py in hex as well.

subrepo: append subrepo path to subrepo error messages This change appends the subrepo path to subrepo errors. That is, when there is an error performing an operation a subrepo, rather than displaying a message such as: pushing subrepo MYSUBREPO to PATH searching for changes abort: push creates new remote head HEADHASH! hint: did you forget to merge? use push -f to force mercurial will show: pushing subrepo MYSUBREPO to PATH searching for changes abort: push creates new remote head HEADHASH! (in subrepo MYSUBREPO) hint: did you forget to merge? use push -f to force The rationale for this change is that the current error messages make it hard for TortoiseHg (and similar tools) to tell the user which subrepo caused the push failure. The "(in subrepo MYSUBREPO)" message has been added to those subrepo methods were it made sense (by using a decorator). We avoid appending "(in subrepo XXX)" multiple times when subrepos are nexted by throwing a "SubrepoAbort" exception after the extra message is appended. The decorator will then "ignore" (i.e. just re-raise) the exception and never add the message again. A small drawback of this method is that part of the exception trace is lost when the exception is catched and re-raised by the annotatesubrepoerror decorator. Also, because the state() function already printed the subrepo path when it threw an error, that error has been changed to avoid duplicating the subrepo path in the error message. Note that I have also updated several subrepo related tests to reflect these changes.

tests: fix some slash-based Windows failures

inotify: on Python < 2.6, socket.error lacks errno

hidden: invalidate hiddenrevs when needed The `hiddenrevs` cache is volatile too (It use content from `obscache`). When unsure it is invalidated when necessary. In a near future, the cache will probably be moved to `revsfiltercache`

cache: group obscache and revsfiltercache invalidation in a single function Both caches are very volatile and needs invalidation on the same kind of event. revsfiltercache actually depends on the content of revsfiltercache.

clfilter: use filtering in `visibleheads` This is the second real use of changelog filtering. The change is very small to allow testing the new filter with a setup close to the original one. We replace custom post processing on `heads`function by call to the standard code pass on a filtering repo. In later coming will have wider usage of filtering that will make the dedicated function useless.

clfilter: use filtering in `visiblebranchmap` Here is the first real use of changelog filtering. The change is very small to allow testing the new filter with a setup close to the original one. We replace custom post processing on branchmap function by call to the standard code pass on a filtering repo. In later coming will have wider usage of filtering that will make the dedicated function useless.

clfilter: introduce a "unserver" filtering mode This mode is for repository used as a server. It filter secret and hidden changeset out. It is put to use in later changeset.

clfilter: add a cache on repo for set of revision to filter for a given set. Recomputing the filtered revisions at every access to changelog is far too expensive. This changeset introduce a cache for this information. This cache is hold by the repository (unfiltered repository) and invalidated when necessary. This cache is not a protected attribute (leading _) because some logic that invalidate it is not held by the local repo itself.

clfilter: add actual repo filtering mechanism We add a `filtered` method on repo. This method return an instance of `repoview` that behaves exactly as the original repository but with a filtered changelog attribute. Filters are identified by a "name". Planned filter are `unserved`, `hidden` and `mutable`. Filtering the repository in place what out of question as it wont not allows multiple thread to share the same repo. It would makes control of the filtering scope harder too. See the `repoview` docstring for details. A mechanism to compute filtered revision is also installed. Some caches will be installed in later commit.

inotify: pacify pestiferous pyflakes precipitously

tests: make test-inotify-issue1208.t disappear

posix: move server side of unix domain sockets out of inotify We also turn the unix domain socket into a class, so that we have a sensible place to hang its logically related attributes and behaviour. We'll shortly want to reuse this in other code.

inotify: don't fall over just because of a dangling symlink Previously, the inotify server failed to start if .hg/inotify.sock was a symlink that pointed to a non-existent path. This behaviour does not seem to make any sense. Now, if we encounter a broken symlink, we unlink it and continue.

test-inotify: test symlink indirection for unix sockets The inotify code performs a delicate dance to work around the 108-byte limit on unix domain socket path names on Linux. This change sets us up to safely refactor that code without breaking it. (It is redundant with part of test-inotify-issue1208.t, but we will shortly make that test go away.)

test-pathencode: compare current pathencoding implementations We already have two implementations of the pathencoding (C and Python) and this test can perfectly well be used to probabilistically test them instead of just wasting CPU cycles and test time.

rebase: use lazy ancestor membership testing For a repository with over 400,000 commits, rebasing one revision near tip, this avoids one walk up the DAG, speeding the operation up by around 0.8 seconds.

localrepo: use lazy ancestor membership testing For a repository with over 400,000 commits, rebasing one revision near tip, this avoids two treks up the DAG, speeding the operation up by around 1.6 seconds.

ancestor: add lazy membership testing to lazyancestors This also makes the perfancestorset command use lazy membership testing. In a linear repository with over 400,000 commits, without this patch, hg perfancestorset takes 0.80 seconds no matter how far behind we're looking. With this patch, hg perfancestorset -- X takes: Rev X Time -1 0.00s -4000 0.01s -20000 0.04s -80000 0.17s -200000 0.43s -300000 0.69s 0 0.88s Thus, for revisions close to tip, we're up to several orders of magnitude faster. At 0 we're around 10% slower.

revlog: move ancestor generation out to a new class This refactoring is to prepare for implementing lazy membership.

ignore: process hgignore files in deterministic order Previously, we processed them in whatever order the dict iterator gave us.

ignore: only read an ignore file once

ignore: refactor ignore into two functions This prepares us for eventually being able to hash the list of patterns in use.

clfilter: fix `nodemap` usage in `getbundle` With the current implementation, `changelog.nodemap` is not filtered. So some filtered changeset in common are not filtered by `n in nodemap`. This leads to crash lower in the stack when the bundle generation try to access those node on a filtered changelog.

test: fix truncated comment in test The push is made to ensure repository are related. The comment in the initial changeset got truncated somehow.

clfilter: ensure context raise RepoLookupError when the revision is filtered Currently the code path of `changectx(filteredrepo, rev)` call `filteredrepo.changelog.node(rev)`. When `rev` is filtered this raise an unhandled `IndexError`. This case now raise a `RepoLookupError` as other error case do.

revlog: remove incancestors since it is no longer used

transplant: replace incancestors uses with ancestors

revlog.ancestors: add support for including revs This is in preparation for an upcoming refactoring. This also fixes a bug in incancestors, where if an element of revs was an ancestor of another it would be generated twice.

perf: add command to test performance of membership in ancestor set The new command, perfancestorset, takes an argument denoting which revset to test the membership of. Currently this runs through all the ancestors and converts them into a set. The primary purpose of having this is to compare this approach, currently used in several places, against the upcoming lazy approach.

ancestor: move missingancestors doctest out into a separate file This is in preparation for upcoming patches which will reuse the same graph for tests.

merge with crew-stable

dirstate: remove obsolete comment from setbranch This comment should have been removed in b74361cf7c0a, when the call to scmutil.checknewlabel was removed.

dirstate: don't rename branch file if writing it failed

commands: 'hg bookmark NAME' should work even with ui.strict=True Before this patch, enabling strict command processing (ui.strict=True) meant that 'hg bookmark NAME', as referenced several places in the documentation, would not work. This adds 'bookmark' as an explicit alias to 'bookmarks'.

tests: improve test-mv-cp-st-diff.t readability

obsolete: refuse to push divergent changeset As other troubles `unstable` and `bumped`. Followup patches may simplify the push code with unification of "obsolescence troubles" handling.

obsolete: add a divergent method on context The same we have `unstable` and `bumped`. Convenient method to access troubles information in general may land later. This get actual use and testing in the next changesets.

obsolete: add revset and test for divergent changesets This changesets add a new `divergent()` revset similar to `unstable()` and `bumped()` one. Introducting this revset allows actuall test of the divergent detection.

obsolete: detect divergent changesets Divergent changeset are final successors (non obsolete) of a changeset who compete with another set of final successors for this same changeset. For example if you have two obsolescence markers A -> B and A -> C, B and C are both "divergent" because they compete to be the one true successors of A. Public revision can't be divergent. This function is used and tested in the next changeset.

obsolete: drop successors sets which are subset of another one If both "(B,)" and "(B, C)" are successors set of "A", "(B,)" is dropped. We won't be interrested in detection such divergence scenario.

obsolete: compute successors set Successors set are an important part of obsolescence. It is necessary to detect and solve divergence situation. This changeset add a core function to compute them, a debug command to audit them and solid test on the concept. Check function docstring for details about the concept.

mq: don't fail when removing a patch without patch file from series file

largefiles: align rm warnings with warnings used in core

merge with stable

largefiles: commit directories that only contain largefiles (issue3548) If we pass a directory to commit whose only commitable files are largefiles, the core commit code aborts before finding the largefiles. So we do the following: For directories that only have largefiles as matches, we explicitly add the largefiles to the matchlist and remove the directory. In other cases, we leave the match list unmodified.

revset.children: ignore rev numbers that are too low This replaces unnecessary parentrevs() calls with calculating min(parentset). Even though the min operation is O(size of parentset), since parentrevs is relatively expensive, this tradeoff almost always works in our favour. In a repository with over 400,000 changesets, hg perfrevset "children(X)" takes: Set X Before After -1 0.51s 0.06s -1000: 0.55s 0.08s -10000: 0.56s 0.10s -100000: 0.60s 0.25s -100000:-99000 0.55s 0.19s 0:100000 0.60s 0.61s all() 0.72s 0.74s The relative performance is similar for Mercurial's own repository -- several times faster in most cases, slightly slower for revisions close to 0 and all().