tests: do not print hgrc in test This lets test-rebase-cache.t pass also when --inotify or --extra-config-opt is specified.

contrib: delete setup3k in favor of setup --c2to3 setup3k was merged into setup in 7a7a1c594d. Now finally get rid of it.

cleanup: remove unused imports detected by pyflakes

tests: check-code more python files without py extension files found by running $ hg manifest | grep -v "\." | xargs file | grep python

dummyssh: fix check-code nit

test-pathencode: randomize length of each path component This makes it possible for long and short components to exist in the same path. This also makes shorter path components more likely. For randint(1, randint(1, n)), the likelihood that one sees a number k (1 <= k <= n) is 1/n * (\sum_{k=i}^n 1/i). This decreases with k, much like in the real world where shorter paths are more common than longer ones. The previous fix and this one together cause issue3958 to be detected by this test with reasonable frequency. When this test was run 100 times in a loop, the issue was detected 30 of those times.

test-pathencode: reduce makepart length requirement by 1 This allows path components of length 1 to be generated.

pathencode: fix hashmangle short dir limit (issue3958) The Python version of this (see mercurial/store.py:_hashencode) copies path components up to a limit of maxshortdirslen bytes. The Python version does not consider the initial "dh/" to be part of the this, though, while the C version currently does. Adding len("dh/") == 3 to the limit for the C version brings it in line with the Python version. This was not caught by the randomized testing scheme in test-pathencode.py because of a couple of flaws with the test. Upcoming patches will fix those problems.

docs: change description to synopsis in hgrc.5 Spotted by Eric S. Raymond.

run-tests: sort missing files first instead of raising an error sort first for early telling typos in test names

filectx: remove dependencies on filerev Removing dependencies on filectx.filerev() makes it easier to create a filelog implementation that doesn't have rev numbers.

hg: move return statement after finally block return is always run after finally block. Now we have same functionality, but clearer readability.

run-tests: call Threads constructor with keyword arguments This is suggested in the python documentation (on http://docs.python.org/2/library/threading.html#thread-objects)

run-tests: ignoring tests works again running with --retest did not work anymore because runone still returned None for this case. But this is not allowed since 6a127fa5de23.

check-code: introduce function for using re2 when available Do it similar as in mercurial.util. For simplicity only support flag multiline which is the only one used.

check-code: compile filters when loading

check-code: compile all patterns on initialisation They where compiled once for every checked file (when calling finditer).

check-code: only fix patterns once The patterns were fixed once for every file. Now only do it once when loading the file.

merge with stable

commit: amending with --close-branch (issue3445) You can't close a branch that hasn't got a head. newbranch + commit --close-branch must fail newbranch + commit + commit --amend --close-branch must fail You must not be allowed to close a branch that is not defined.

run-tests: simplify interrupted message

run-tests: remove spurious disable of --time with --debug

run-tests: always gather runtimes

run-tests: when interrupted report time in failure message When --time is specified, the interruption message of an interrupted test is extended with the time the test has run INTERRUPTED: /path/to/tests/test-example.t (after 513 seconds)

run-tests: report interrupted tests When the test run is aborted, a message is printed for each interrupted test. This is helpful when a test is hanging. example failure message: INTERRUPTED: /path/to/tests/test-example.t The message can appear before or after the line with the number of tests

run-tests: open hgrc file only for writing The file is not read here. Opening with "w+" is unnecessary.

color: use pythons isinstance method instead of reprogramming it

color: only provide the required opt to _modesetup

doc: make it easier to read how to enable extensions We tell people all the time that enabling extensions is not a scary thing to do, but we don't make it easy enough for an absolute novice to do so. When they see a suggestion to do "hg extfoo bar", the error message tells them "see hg help extensions", but that help page doesn't actually tell them where configuration files are. Furthermore, the big warning about why extensions aren't enabled by default should be pushed down a little bit. Most of the extensions shipped by hg are not all that scary, and some very basic and useful cosmetic extensions like graphlog, color, pager, and progress, should be enabled for many hg users.

doc: reword "config file" to "configuration file" While we do use the abbreviation "config" elsewhere in the docs, the phrase "configuration file" is always written out in full, except in this location in phases.txt.

run-tests: make --noskips work

filelog: switch 'not len(filerevlog)' to 'not filerevlog' A few places in the code use 'if not len(revlog)' to check if the revlog exists. Replacing this with 'not filerevlog' allows alternative revlog implementations to override __nonzero__ to handle this case without implementing __len__.

annotate: simplify annotate parent function The annotate algorithm used a custom parents() function to try to reuse filectx and filelogs. I simplified it a bit to rely more heavily on the self.parents() which makes it work well with alternative filectx implementations. I tested performance on a file with 5000+ revisions but no renames, and on a file with 500 revisions repeating a series of 4 edits+renames and saw zero performance hit. In fact, it was reliably a couple milliseconds faster now. Added the perfannotate command to contrib/perf.py for future use.

changegroup: move changegroup file adding to a separate function Moving the logic that adds files to a changegroup to a different function allows extensions to override it and customize the way filelogs are added to changegroups. No logic is changed.

log: move log file walk to its own function This moves the logic that determines which changesets to process during a 'hg log foo.txt' command. Putting it in its own function allows extensions to modify how the file log is traversed. For instance, the current implementation uses filelog revs heavily. Other implementations may not have filelog revs available. The function throws an exception if the traversal is not possible via the filelog, so the parent function can do things the slow way if necessary (by walking the entire commit history). Aside from the exception throwing, no logic is changed.

bundle: refactor changegroup prune to be its own function Moving the prune function to be a non-nested function allows extensions to control which revisions are allowed in the changegroup. For example, in my shallow repo extension I want to prevent filelogs from being added to the bundle. This also allows an extension to use a filelog implementation that doesn't have revlog.linkrev implemented.

filectx: refactor filectx.rev() to use filectx._changeid The code in filectx.rev() was identical to filectx._changeid. Fixing this allows alternative filectx implementations to only override _changeid.

util: add an optional timestamp parameter to makedate This will be used by the upcoming shelve extension.

util: rename ct variable in makedate to timestamp

merge: add a files method to the mergestate class This will be used in the upcoming shelve extension.

histedit: raise ImportError when demandloading is enabled

run-tests: add --loop support This makes it easy to run tests repeatedly at high loads to look for test failures.

run-tests: --interactive and --jobs no longer conflict

run-tests: sort certain slow tests earlier by keyword There are a few tests that evade the size heuristic

run-tests: drop unused resultslock

run-tests: drop options.child and users

run-tests: remove runchildren, now unused

run-tests: schedule largest tests first

run-tests: introduce thread scheduler

run-tests: use count to calculate port to use This will keep threads from using the same server ports

run-tests: introduce threadtmp directory

run-tests: add abort flag This will be used to help threads clean up gracefully

run-tests: move more variables to env

run-tests: simplify env deletion

run-tests: move most of remaining environment tweaks

run-tests: move environment creation to a separate function

run-tests: move HGRCPATH to env

run-tests: move DAEMON_PIDS to env

run-tests: move HGPORT setting to env

run-tests: write tmp paths into env copy