revset: import set classes directly from smartset module Follows up 1be65deb3d54.

help: add pointer how to narrow list of resolved/unresolved files (issue5469)

shelve: add -n/--name option to unshelve (issue5475) This makes using shelve/unshelve more consistent because shelving can be done using name option and unshelving as well. Author of the idea of this improvement and solution is joshgold.

smartset: use native set operations as fast paths For set operations like "&" and "-", where we know both basesets have their sets ready, and the first set is sorted, use the native Python set operations as a fast path. Note: "+" is not optimized as that will break the ordering. This leads to noticeable improvements on performance: revset | before | after | delta ---------------------------------------------------------------- draft() & draft() & draft() & draft() | 776 | 477 | -39% draft() + draft() + draft() + draft() | 2849 | 2864 | draft() - draft() + draft() - draft() | 943 | 240 | -75% draft() - draft() - draft() - draft() | 557 | 197 | -64% (time measured in microseconds)

smartset: add some doctests Add doctests explaining the set / list behavior. This will make the following changes more confident.

obsolete: avoid using revset language to compute the obsolete revset This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. See previous patches for the motivation. Now we have APIs in phasecache to get the non-public set efficiently, let's use it directly instead of going through the "not public()" revset language in "obsolete()" computation. This patch was meaured using: for i in 'public()' 'not public()' 'draft()' 'not draft()'; do hg perfrevset "$i"; hg perfrevset "$i" --hidden; done and no noticeable (> 1%) performance difference was observed.

revset: use phasecache.getrevset This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. See the previous patch for motivation. This patch changes revset code to use phasecache.getrevset so it no longer accesses the private field: _phasecache._phasesets directly. For performance impact, this patch was tested using the following query, on my hg-committed repo: for i in 'public()' 'not public()' 'draft()' 'not draft()'; do echo $i; hg perfrevset "$i"; hg perfrevset "$i" --hidden; done For the CPython implementation, most operations are unchanged (within +/- 1%), while "not public()" and "draft()" is noticeably faster on an unfiltered repo. It may be because the new code avoids a set copy if filteredrevs is empty. revset | public() | not public() | draft() | not draft() hidden | yes | no | yes | no | yes | no | yes | no ------------------------------------------------------------------ before | 19006 | 17352 | 239 | 286 | 180 | 228 | 7690 | 5745 after | 19137 | 17231 | 240 | 207 | 182 | 150 | 7687 | 5658 delta | | -38% | | -52% | (timed in microseconds) For the pure Python implementation, some operations are faster while "not draft()" is noticeably slower: revset | public() | not public() | draft() | not draft() hidden | yes | no | yes | no | yes | no | yes | no ------------------------------------------------------------------------ before | 18852 | 17183 | 17758 | 15921 | 17505 | 15973 | 41521 | 39822 after | 18924 | 17380 | 17558 | 14545 | 16727 | 13593 | 48356 | 43992 delta | | -9% | -5% | -15% | +16% | +10% That may be the different performance characters of generatorset vs. filteredset. The "not draft()" query could be optimized in this case where both "public" and "secret" are passed to "getrevsets" so it won't iterate the whole repo twice.

phases: add a getrevset method to phasecache This is part of a refactoring that moves some phase query optimization from revset.py to phases.py. The motivation behind this was chg repo preloading - to make the obsstore depend on less things (like the revset language). The refactoring also looks good by itself - phasecache does not expose its private field "_phasesets" via public methods and revset.py is accessing it in a hacky way. This patch adds a "getrevset" method, which takes multiple phases and returns a revset in an best-effort efficient way - for "public" phase, it returns a lazy generatorset; for "draft" and "secret", it returns efficient "baseset".

smartset: convert set to list lazily If the caller only wants to construct a baseset via a set, and then do "__contains__" tests. It's unnecessary to initialize the list. Testing on my unfiltered hg-committed repo where len(draft()) is 2600, this patch shows about 6% improvement on set intensive queries: Before: $ for i in `seq 5`; hg perfrevset 'draft() & draft() & draft() & draft()' ! wall 0.001196 comb 0.000000 user 0.000000 sys 0.000000 (best of 2011) ! wall 0.001191 comb 0.000000 user 0.000000 sys 0.000000 (best of 2099) ! wall 0.001186 comb 0.010000 user 0.010000 sys 0.000000 (best of 1953) ! wall 0.001182 comb 0.000000 user 0.000000 sys 0.000000 (best of 2135) ! wall 0.001193 comb 0.000000 user 0.000000 sys 0.000000 (best of 2177) After: $ for i in `seq 5`; hg perfrevset 'draft() & draft() & draft() & draft()' ! wall 0.001128 comb 0.000000 user 0.000000 sys 0.000000 (best of 2247) ! wall 0.001119 comb 0.000000 user 0.000000 sys 0.000000 (best of 2317) ! wall 0.001115 comb 0.000000 user 0.000000 sys 0.000000 (best of 2244) ! wall 0.001131 comb 0.000000 user 0.000000 sys 0.000000 (best of 2093) ! wall 0.001124 comb 0.000000 user 0.000000 sys 0.000000 (best of 2134) It could have bigger impact on larger sets in theory.

ui: construct _keepalnum list in a python3-friendly way It'll be more expensive, but it preserves the behavior.

match: making visitdir() deal with non-recursive entries Primarily as an optimization to avoid recursing into directories that will never have a match inside, this classifies each matcher pattern's root as recursive or non-recursive (erring on the side of keeping it recursive, which may lead to wasteful directory or manifest walks that yield no matches). I measured the performance of "rootfilesin" in two repos: - The Firefox repo with tree manifests, with "hg files -r . -I rootfilesin:browser". The browser directory contains about 3K files across 249 subdirectories. - A specific Google-internal directory which contains 75K files across 19K subdirectories, with "hg files -r . -I rootfilesin:REDACTED". I tested with both cold and warm disk caches. Cold cache was produced by running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced by re-running the same command a few times. These were the results: Cold cache Warm cache Before After Before After firefox 0m5.1s 0m2.18s 0m0.22s 0m0.14s google3 dir 2m3.9s 0m1.57s 0m8.12s 0m0.16s Certain extensions, notably narrowhg, can depend on this for correctness (not trying to recurse into directories for which it has no information).

match: adding support for matching files inside a directory This adds a new "rootfilesin" matcher type which matches files inside a directory, but not any subdirectories (so it matches non-recursively). This has the "root" prefix per foozy's plan for other matchers (rootglob, rootpath, cwdre, etc.).

runtests: add an IPv6 command line flag Now we have all IPv6 related issues fixed, add a command line flag so people could actually run tests with IPv6.

runtests: always set web.ipv6 Previously, we only set web.ipv6 if IPv6 is used, but not on the IPv4 case. Since we already have set web.address, it makes sense to move "web.ipv6" out from "extra config options".

runtests: set web.address to localhost Previously, "hg serve" will listen on "", which is not clear which interface it will actually listen on - it could listen on all interfaces (ex. 0.0.0.0 on IPv4). The run-tests.py script only checks "localhost" for available ports. So let's make it the same for "hg serve" by explicitly setting "web.address" to "localhost". This resolves some IPv6 EADDRINUSE errors.

tests: use LOCALIP This patch replaces hardcoded 127.0.0.1 with $LOCALIP in all tests. Till now, the IPv6 series should make tests pass on common IPv6 systems where the local device has the address "::1" and the hostname "localhost" resolves to "::1".

dummyssh: use LOCALIP This patch replaces hard-coded 127.0.0.1 with $LOCALIP in dummyssh.

runtests: export LOCALIP Previously, tests hard-code local IP address as "127.0.0.1". That won't work for IPv6. This patch exports the $LOCALIP environment variable, which is set to "::1" if we decide to use IPv6.

tinyproxy: use IPv6 if HGIPV6 is set to 1 This patch makes tinyproxy.py work in IPv6 mode if HGIPV6 is set to 1. This will make test-http-proxy.t pass on IPv6 machines.

dumbhttp: use IPv6 if HGIPV6 is set to 1 This will fix flaky tests using dumbhttp. The patch was tested on gcc112.fsffrance.org using the following command: ./run-tests.py -j 40 --runs-per-test 120 test-bundle2-remote-changegroup.t

runtests: export HGIPV6 to hint test scripts whether to use IPv6 Previously, run-tests.py only exports HGPORT, and scripts in tests do not know if IPv6 should be used. And that breaks scripts like dumbhttp.py which always uses IPv4. This patch makes run-tests.py export HGIPV6, which can help test scripts like dumbhttp.py and tinyproxy.py to decide whether to use IPv6 or not.

runtests: prefer IPv4 to IPv6 To make IPv6 work, there are multiple areas that need to fix. Before they all get fixed, use IPv4 by default. This should fix tests caused on IPv6 systems.

doc: correct example concerning "hg purge" alias in man page "hgrc.5" The "hg purge" alias as currently described in "hgrc.5" issues a possibly confusing error message like rm: missing operand Try 'rm --help' for more information. if no files are to be purged at all. This patch slightly modifies the example by adding a "-f" option to the "rm" command.

tests: prove that ignore works

annotate: migrate to modern pager API

ui: add a debug print right before we start the pager This makes it easier to figure out why a command is getting paginated.

ui: respect historic pager.attend-$COMMAND=no I'm on the fence about this behavior, but the user's intent was pretty specific and it's not expensive to support this case.

tests: clean up a bunch of pager testing that is about to be invalidated All this attend logic and potential bugs just no longer make sense to test.

ui: add ignore-single-command functionality This closes the last feature gap other than the attend list from the extension. For now, I'm leaving the attend list in the extension, because I'm unsure it has merit in a world where commands have been updated to take advantage of the modern API.

ui: introduce neverpager() call I'm about to add direct paging support to some commands, and as a result we need a way to communicate from the higher layers of dispatch that paging is explicitly disabled.