rust-changelog: added a test for `NULL_REVISION` special case The result is due to `Revlog.get_rev_data()` returning an empty byte string for `NULL_REVISION`, followed by special case for emtpty byte strings in `ChangelogRevisionData::new()`.

rust-changelog: made doc-comments more consistent The most important is the one about `data_for_rev`, that looked like a copy-paste leftover (got me confused first time I read this code, before I actually learned there were both `Entry` and RevisionData`. In the comment for the `struct`, "changelog" was probably more about the format in general (as documented elsewhere) than as an identifier. Some of the "Return something" had "of", half had "for".

extras: re-use Projection from jaraco.collections

extras: expose 'retained_extras' for extensions to extend

extras: extract function for projecting names from a gettable object

hgweb: add "children" into the JSON template for a changeset The children are shown in the HTML templates, so I don’t see a reason against including them in the JSON template as well.

branching: merge stable into default

help: fix formatting for http config section

branching: merge stable into default

fastexport: rework newline logic Newlines should only be added when otherwise the stream would look weird without them (on blobs), therefore they are the exception. Flip the logic so they are added, not skipped.

encoding: avoid quadratic time complexity when json-encoding non-UTF8 strings Apparently the code uses "+=" with a bytes object, which is linear-time, so the whole encoding is quadratic-time. This patch makes us use a bytearray object, instead, which has a(n amortized-)constant-time append operation. The encoding is still not particularly fast, but at least a 10MB file takes tens of seconds, not many hours to encode.

bundle: prevent implicite bundling of internal changeset Now that the two mains source of on-disk bundle are preventing the inclusion of internal changesets in their bundling. We can add a lower level check that would prevent any other leakage of internal-phase changesets. We keep the door open to some usage, like the temporary bundle using during strip for example.

bundle: abort if the user request bundling of internal changesets See inline comments for details.

strip: do now include internal changeset in the strip backup See inline comment for details.

revset: add `_internal()` predicate This predicate help core code to select internal changeset (in the internal phase).

strip: drop the assert about bundled revision This is working well, so no need for extract computation. See the previous changeset for the rationnal of still have these assert around for a short interval.

strip: explicitly compute the boundary of the backup bundle We want to make change to the set of backed up revision in a future changeset, we start with a change of the computation without any changes in the semantic to clarify later changeset. The could of costly assert are here to testify that the result is still correct. They will be removed in the next changesets, but I wanted them in this changeset to help in case someone bisect a regression to this changeset in the future.

outgoing: fix common-heads computation from `missingroots` argument When initializing a `outgoing` object, the `common set` can be defined explicitly (with the `commonheads` argument`) or implicitly (with the missingroots arguments). It turns out the logic to compute `commonheads` from `missingroots` is buggy, as it does not consider the parents of enough changesets. Previously, it only considered parents of "missingroots` items, while it need to consider all parents of missing. Here is an example: F |\ C E | | B D |/ A If we use [E] as missing-roots, the missing set is [E, F], and the common-heads are [C, D]. However you cannot only consider the parent of [E] to find them, as [C] is not a parent of [E]. This already fix the bundle generated in one test, and it would prevent many other to misbehave with future change from this series.

bundle: include required phases when saving a bundle (issue6794) We now properly computes and includes phases above secret in bundle, previously, they would be skipped, and then the code computing them would crash. Note that from this changeset, we also include the heads associated with the changegroup's "target" phase. This turned out to be necessary to ensure the movement of changeset included in the bundle, but already known locally. This explain why lines for "secret" heads appears in multiple tests.

bundle: add test bundling changeset in the "archived" phase Having this test highlight that phase bundling above secret is significantly broken. Fixes coming in the next changesets.

bundle: introduce a "v3" spec This is a small update from "v2", we use the freshly out of experimental changelog version "03' format (alignment with bundle version is a coincidence) and we now bundle phases by default. We shall use v3 as the default bundle type later, when changegroup version '03' is a bit more established

bundle: add some phase boundary in the bundle type test case Same logic as the previous one, we want the tests to cover richer cases. It actually reveal a bug in `hg bundle foo.hg REMOTE` involving secret. So this is definitly not a bad idea.

bundle: expand the graph we us for bundletype/bundlespec tests We are about to test more things, especially phase bundling, so we need a graph a bit more complex than a single node. The test "code" was a bit simplified in the process, but no test-semantic changes were made.

revset: include all non-public phases in _notpublic We forgot up to update this when new phases were added.

dirstate: remove _actual_file_name methode This is dead-code

revlog: add an exception hint when processing LFS flags without the extension It would be even better if this was either detected sooner, or the transaction completed (especially since the read/write processors aren't needed for the exchange). But this makes it easier for the user to resolve until that can be figured out.

tests: drop py36 conditionals in test-bad-extension.t Since this is a `>=` test, it's really conditionalizing py27 content, which isn't a thing anymore.

tests: drop py36 conditionals in test-hook.t Since this is a `>=` test, it's really conditionalizing py27 content, which isn't a thing anymore.

tests: drop py36 conditionals in test-http-bad-server.t Since this is a `>=` test, it's really conditionalizing py27 content, which isn't a thing anymore.

configitems: enable changegroup3 by default (unless using infinitepush) The LFS extension requires this, and if it isn't enabled on the client (or the LFS extension isn't loaded), a web client gets a 500 instead of a sensible error message. Now it gets a different (client) error, but maybe it can be handled more gracefully. c0f11347b107 indicates that treemanifest repos have this issue too. 29cfc474c5fd mentions gating this behind `experimental` so that the format could change, but that was 7 years ago and we now have an experimental `changegroup4` as well. We can keep this as a config for the next cycle in case someone runs into an unexpected problem, and then jettison it if the infinitepush bundle name changes are either acceptable as-is or can be created differently.

infinitepush: opt out of changegroup3 unless explicitly configured This is currently a no-op, as changegroup3 is disabled by default. But when it is enabled, it changes the hash names of the bundle files. As I don't use this extension, I have no idea if that's OK or not. So keep the current default behavior until we can get more info from actual users, while allowing them to opt-in for testing purposes.

statichttprepo: unbyteify several IOError messages Builtin errors generally want str messages.

statichttprepo: fix the vfs.join() method to match the base class definition Flagged by PyCharm. The superclass implementation raised NotImplementedError.

mail: unbyteify the SMTPException message This is a subclass of OSError, which wants str instead of bytes.

mail: add a missing argument to properly override starttls I didn't look into when this changed, but it was flagged by PyCharm.

crecord: switch a curses argument to bool to appease type checkers

grep: avoid reassigning byteskwargs to strkwargs PyCharm flagged each of these `get()` calls with bytes. We still pass the bytes form to the formatter to avoid changing the API, until all callers can be changed.

cat: drop unnecessary internal roundtrip of kwargs PyCharm seems to stick with the type at the initial assignment, so it flagged the `get()` with a bytes key since the method argument has str keys. It wasn't a bug, but then the bytes form is otherwise unused, and converted back to str.

Added signature for changeset 271a4ab29605

Added tag 6.4.5 for changeset 271a4ab29605

relnotes: add 6.4.5

path: use the next `display` argument to deal with boolean We have a generic mechanism that we can now use for the special case now.

path: display proper user facing value for pulled-delta-reuse-policy The integer was not what the user expect nor what could be provided as a config value.

paths: add an argument to format the suboption display We will use it in the next function to the delta policy display. It could also be use to deal with the other special case in the command code, but that is unnecessary churn for stable so that part will go on default.

ui: fix crash in `hg paths` when pulled-delta-reuse-policy is in use The crash is a result of [value] being an int, but being used as a bytestring.

ui: add a test demonstrating a crash in `hg paths`

re2: fix reporting of availability in `hg debuginstall` We add and use an official API to check is re2 is available. This prevent the bug previously in place were debuginstall was considering confusing `None` (i.e. non-initialized) and `False` (i.e. unavailable).

re: make _checkre2 a static method There is no need to it to be a method, so we make it at least a static method to make it easier to call.

re2: exit `_checkre2` early if calling it is useless If we already know if re2 is supported there is no need to run the check again. Stricly speaking we don't call it twice, but this seems a simple enough safeguard to include in this series.

test-dirstate-version-fallback: future-proof the test for a different default Dirstate-v2 will become the default at some point, which would cause this test to fail. Let's save someone else the headache later.

Added signature for changeset da372c745e0f

Added tag 6.4.4 for changeset da372c745e0f

relnotes: add 6.4.4

revlog: avoid possible collision between directory and temporary index Since 6.4, we create a temporary index file to write the split data without overwriting the inline version too early. However, the store encoding does not prevent these new `.i.s` file to collide with a directory with the same name. While the odds for such a collision to happens are fairly low, the collision would prevent Mercurial from working. The store encoding have a mitigation solution in place to prevent such collisions from happening for `.i` and `.d` files, but not for other extensions. We cannot update this encoding scheme to solve the issue since it would diverge from older version of Mercurial. Instead, we create an alternative directory tree dedicated to such files. The use of the `.i` extension combined with store encoding will prevent collisions there.

revlog: move the computation of the split_index path in a property This is about to become more complex, so we gather the logic in a single place.

rust-dirstate: fall back to v1 if reading v2 failed This will help us not fail when a v1 dirstate is present on disk while a v2 was expected (which could happen with a racy/interrupted upgrade).

dirstate: add test showing dirstate version mismatch causes an error We should fall back to trying dirstate v1 when v2 fails to read.

rust-dirstate: rename `has_dirstate_v2` to `use_dirstate_v2` It is closer to the right semantics. I added a docstring to better explain the reasonning. In the next patch(es), I will address the underlying issue of finding the "wrong" version of the dirstate on disk.

delta-find: fix pulled-delta-reuse-policy=forced behavior The code that select delta still has too many oportunity to discard the delta is has been forcibly asked to reuse. However is is fairly easy to use a dedicated fastpath for this case. So we do so. Cleaning other code that tries to enforce that policy will be done on default.

delta-find: display more information about the search in some case This will be useful to access the effect of the delta reuse policy.