obsolescence: add test case D-4 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case D-4: unknown changeset in between known on Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case D-3 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case D3: missing prune target (prune not in "pushed set") Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case D-2 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce D-2: missing prune target (prune in "pushed set") Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case D-1 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case D-1: Pruned changeset based on missing precursor of something not present Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case C-4 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce C.4: multiple successors, one is pruned Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case C-3 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case C-3: Pruned changeset on precursors of another pruned one Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case C-2 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce C-2: Pruned changeset on precursors Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case C-1 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce C-1: Multiple pruned changeset atop each other Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

stdio: add Linux-specific tests for error checking

stdio: raise StdioError if something goes wrong in ui.flush The prior code used to ignore all errors, which was intended to deal with a decade-old problem with writing to broken pipes on Windows. However, that code inadvertantly went a lot further, making it impossible to detect *all* I/O errors on stdio ... but only sometimes. What actually happened was that if Mercurial wrote less than a stdio buffer's worth of output (the overwhelmingly common case for most commands), any error that occurred would get swallowed here. But if the buffering strategy changed, an unhandled IOError could be raised from any number of other locations. Because we now have a top-level StdioError handler, and ui._write and ui._write_err (and now flush!) will raise that exception, we have one rational place to detect and handle these errors.

stdio: raise StdioError if something goes wrong in ui._write_err The prior code used to ignore certain classes of error, which was not the right thing to do.

stdio: raise StdioError if something goes wrong in ui._write

stdio: catch StdioError in dispatch.run and clean up appropriately We attempt to report what went wrong, and more importantly exit the program with an error code. (The exception we catch is not yet raised anywhere in the code.)

stdio: add machinery to identify failed stdout/stderr writes Mercurial currently fails to notice failures to write to stdout or stderr. A correctly functioning command line tool should detect this and exit with an error code. To achieve this, we need a little extra plumbing, which we start adding here.

atexit: switch to home-grown implementation

atexit: test failing handlers

ui: add special-purpose atexit functionality In spite of its longstanding use, Python's built-in atexit code is not suitable for Mercurial's purposes, for several reasons: * Handlers run after application code has finished. * Because of this, the code that runs handlers swallows exceptions (since there's no possible stacktrace to associate errors with). If we're lucky, we'll get something spat out to stderr (if stderr still works), which of course isn't any use in a big deployment where it's important that exceptions get logged and aggregated. * Mercurial's current atexit handlers make unfortunate assumptions about process state (specifically stdio) that, coupled with the above problems, make it impossible to deal with certain categories of error (try "hg status > /dev/full" on a Linux box). * In Python 3, the atexit implementation is completely hidden, so we can't hijack the platform's atexit code to run handlers at a time of our choosing. As a result, here's a perfectly cromulent atexit-like implementation over which we have control. This lets us decide exactly when the handlers run (after each request has completed), and control what the process state is when that occurs (and afterwards).

context: follow all branches in blockdescendants() In the initial implementation of blockdescendants (and thus followlines(..., descend=True) revset), only the first branch encountered in descending direction was followed. Update the algorithm so that all children of a revision ('x' in code) are considered. Accordingly, we need to prevent a child revision to be yielded multiple times when it gets visited through different path, so we skip 'i' when this occurs. Finally, since we now consider all parents of a possible child touching a given line range, we take care of yielding the child if it has a diff in specified line range with at least one of its parent (same logic as blockancestors()).

pager: set some environment variables if they're not set Git did this already [1] [2]. We want this behavior too [3]. This provides a better default user experience (like, supporting colors) if users have things like "PAGER=less" set, which is not uncommon. The environment variables are provided by a method so extensions can override them on demand. [1]: https://github.com/git/git/blob/6a5ff7acb5965718cc7016c0ab6c601454fd7cde/pager.c#L87 [2]: https://github.com/git/git/blob/6a5ff7acb5965718cc7016c0ab6c601454fd7cde/Makefile#L1545 [3]: https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-March/094780.html

sshpeer: fix docstring typo

util: pass sysstrs to warnings.filterwarnings Un-breaks the Python 3 build.

vfs: deprecate all old classes in scmutil Now that all vfs class moved to the vfs module, we can deprecate the old one.

util: add a way to issue deprecation warning without a UI object Our current deprecation warning mechanism relies on ui object. They are case where we cannot have access to the UI object. On a general basis we avoid using the python mechanism for deprecation warning because up to Python 2.6 it is exposing warning to unsuspecting user who cannot do anything to deal with them. So we build a "safe" strategy to hide this warnings behind a flag in an environment variable. The test runner set this flag so that tests show these warning. This will help us marker API as deprecated for extensions to update their code.

gitweb: plug followlines UI in filerevision view Mostly copy CSS rules from style-paper.css into style-gitweb.css. The only modification is addition of !important on "background-color" rule for "pre.sourcelines > span.followlines-selected" selector as the background color is otherwise overriden by "pre.sourcelines.stripes > :nth-child(4n+4)" rule.

gitweb: handle "patch" query parameter in filelog view As for paper style, in f36dc643ffdc, we display "diff" data as an additional row in the table of revision entries for the gitweb template. Also, as these additional diff rows have a white background, they may be confused with log entry rows ("age", "author", "description", "links") of even parity (parity0 also have a white background). So we disable parity colors for log entry rows when diff is displayed and fix the color to the "dark" parity (i.e. parity1 #f6f6f0) so that it's always distinguishable from

gitweb: add information about "linerange" filtering in filelog view As for paper style, in 5e6d44511317, we display a "(following lines <fromline>:<toline> <a href='...'>back to filelog</a>)" message alongside the file name when "linerange" query parameter is present.

util: fix human-readable printing of negative byte counts Apply the same human-readable printing rules to negative byte counts as to positive ones. Fixes output of debugupgraderepo.

show: make template option actually show up in help Previously, the --template/-T option didn't show up in help because it's marked as experimental. It's not really experimental for show, and its quite important for show's funcationality, so let's make sure it always shows up.

show: implement underway view This is the beginning of a wip/smartlog view. It is basically a manually constructed (read: fast) revset function to collect "relevant" changesets combined with a custom template and a graph displayer. It obviously needs a lot of work. I'd like to get *something* usable in 4.2 so `hg show` has some value to end-users. Let the bikeshedding begin.

show: fix formatting of multiple commands Because we're formatting to RST, short lines wrap and there needs to be an extra line break between paragraphs to prevent that. In addition, the indentation in the old code was a bit off. Refactor the code to a function (so we don't leak variables outside the module) and modify it so it renders more correctly.

pycompat: import correct cookie module on Python 3 http.cookielib doesn't exist. http.cookiejar does and it contains the symbols we need. This fixes test failures on Python 3.

chg: respect environment variables for pager Previously chg runs the pager command without respecting its environment variables being told to use. This patch makes it so.

hgweb: add a link to followlines in descending direction We change the content of the followlines popup to display two links inviting to follow the history of selected lines in ascending (as before) and descending directions. The popup now renders as: follow history of lines <fromline>:<toline>: <a href=...>ascending</a> / <a href=...>descending</a>

hgweb: handle a "descend" query parameter in filelog command When this "descend" query parameter is present along with "linerange" parameter, we get revisions following line range in descending order. The parameter has no effect without "linerange".

revset: add a 'descend' argument to followlines to return descendants This is useful to follow changes in a block of lines forward in the history (for instance, when one wants to find out how a function evolved from a point in history). We added a 'descend' parameter to followlines(), which defaults to False. If True, followlines() returns descendants of startrev. Because context.blockdescendants() does not follow renames, these are not followed by the revset either, so history will end when a rename occurs (as can be seen in tests).

context: add a blockdescendants function This is symmetrical with blockancestors() and yields descendants of a filectx with changes in the given line range. The noticeable difference is that the algorithm does not follow renames (probably because filelog.descendants() does not), so we are missing branches with renames.

url: support auth.cookiesfile for adding cookies to HTTP requests Mercurial can't currently send cookies as part of HTTP requests. Some authentication systems use cookies. So, it seems like adding support for sending cookies seems like a useful feature. This patch implements support for reading cookies from a file and automatically sending them as part of the request. We rely on the "cookiejar" Python module to do the heavy lifting of parsing cookies files. We currently only support the Mozilla (really Netscape-era) cookie format. There is another format supported by cookielib and we may want to consider using that, especially since the Netscape cookie parser can't parse ports. It wasn't immediately obvious to me what the format of the other parser is, so I didn't know how to test it. I /think/ it might be literal "Cookie" header values, but I'm not sure. If it is more robust than the Netscape format, we may want to just support it.

httpconnection: allow a global auth.cookiefile config entry This foreshadows support for defining a cookies file.

util: make cookielib module available In preparation for supporting sending cookies on HTTP requests.

crecord: avoid setting non-existing SIGTSTP signal on windows (issue5512) Windows do not have a SIGTSTP so we avoid setting the handler if the signal is unknown.

crecord: ensure we reinstall the SIGTSTP handler Previous, exceptions would prevent the reinstallation of the signal.

crecord: avoid setting non-existing signal SIGWINCH on windows Windows do not have a SIGWINCH so we avoid setting the handler if the signal is unknown.

crecord: ensure we reinstall the SIGWINCH handler Previous, exception in _main(...) would prevent the reinstallation of the signal.

crecord: extract most of 'main' into a sub function There are some setup and cleanup necessary around the main code, that setup/cleanup code needs multiple adjustments so we extract the core code into its own function first for clarity.

templater: add shorthand for building a dict like {"key": key} Like field init shorthand of Rust. This is convenient for building a JSON object from selected keywords. This means dict() won't support Python-like dict(iterable) syntax because it's ambiguous. Perhaps it could be implemented as 'mapdict(xs % (k, v))'.

templater: find keyword name more thoroughly on filtering error Before, it could spill an internal representation of compiled template such as [(<function runsymbol at 0x....>, 'extras'), ...]. Show less cryptic message if no symbol found. New findsymbolicname() function will be also used by dict() constructor.

templater: add dict() constructor It's troublesome to build JSON by template, so let's add programmatic way.

templatekw: add public function to wrap a dict by _hybrid object

templatekw: add public function to wrap a list by _hybrid object

templatekw: add default implementation of _hybrid.gen This is convenient for new template keyword, which doesn't need to support the legacy list hack (provided by _showlist()), but still wants to have a string representation.

parser: preserve order of keyword arguments This helps building dict(key1=value1, ...) in deterministic way.

parser: extend buildargsdict() to support arbitrary number of **kwargs Prepares for adding dict(key1=value1, ...) template function. More tests will be added later.

parser: verify excessive number of args excluding kwargs in buildargsdict() This makes the next patch slightly simpler. We don't need to check the excessive number of keyword arguments since unknown and duplicated kwargs are rejected.

obsolescence: add test case B-7 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B-7: Prune above non-targeted common changeset Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-6 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B6: Pruned changeset with precursors not in pushed set Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-5 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce B-5: Push of a children of changeset which successors is pruned Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-4 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B4: Pruned changeset on common part of history Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-3 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B3: Pruned changeset on non-pushed part of the history Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-2 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B-2: Prune on targeted common changeset Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case B-1 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case B-1: Prune on non-targeted common changeset Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-7 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A-7: non targeted common changeset Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-6 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A6: new markers between changesets already known on both side Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-5 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A-5: partial reordering Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-4 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A-4: Push in the middle of the obsolescence chain Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-3 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A3: new branchs created, one pushed Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-2 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A-2: Two heads, only one of them pushed Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add test case A-1 for obsolescence markers exchange About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce case A-1: pushing a single head Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

obsolescence: add setup script for obsolescence markers exchange tests About 3 years ago, in August 2014, the logic to select what markers to select on push was ported from the evolve extension to Mercurial core. However, for some unclear reasons, the tests for that logic were not ported alongside. I realised it a couple of weeks ago while working on another push related issue. I've made a clean up pass on the tests and they are now ready to integrate the core test suite. This series of changesets do not change any logic. I just adds test for logic that has been around for about 10 versions of Mercurial. They are a patch for each test case. It makes it easier to review and postpone one with documentation issues without rejecting the wholes series. This patch introduce the common script that setup the basic environment for the test cases. Once this script is in. We can accept the other patches in any order. Each test case comes it in own test file. It help parallelism and does not introduce a significant overhead from having a single unified giant test file. Here are timing to support this claim. # Multiple test files version: # run-tests.py --local -j 1 test-exchange-*.t 53.40s user 6.82s system 85% cpu 1:10.76 total 52.79s user 6.97s system 85% cpu 1:09.97 total 52.94s user 6.82s system 85% cpu 1:09.69 total # Single test file version: # run-tests.py --local -j 1 test-exchange-obsmarkers.t 52.97s user 6.85s system 85% cpu 1:10.10 total 52.64s user 6.79s system 85% cpu 1:09.63 total 53.70s user 7.00s system 85% cpu 1:11.17 total

upgrade: simplify the "origin" dispatch in dry run We could compute the final set we need directly.

upgrade: use 'improvement' object for action too This simplify multiple pieces of code. For now we restrict this upgrade to the top level function to keep this patch simple.

upgrade: implement equality for 'improvement' object Through the code, we use a mix of 'improvement' object and string. Having a single type would be simpler. For this we need the object to be comparable.

upgrade: simplify some of the initial dispatch for dry run Since we already have the list of deficiencies, we can use it directly.

upgrade: simplify 'determineactions' Since we only takes 'deficiencies', we can simplify the function and clarify its arguments.

upgrade: filter optimizations outside of 'determineactions' This sounds like higher level logic to process arguments. Moving it out of 'determineactions' will allow passing only deficiencies to the function. Then, in a future changeset, we will remove dispatch on "improvement type" within the function. See next changeset for details.

upgrade: directly iterate over optimisations Since we already have the list of optimisations independent from the deficiencies, we can use it directly. (we make a dual assignement in this changeset to simplify the next one)

upgrade: simplify optimisations validation Since we fetch optimizations distinctly from the deficiencies, we can simplify some code.

upgrade: split finding deficiencies from finding optimisations Our ultimate goal is to make it easier to get a diagnostic of the repository format. A first important and step for that is to separate part related to repository format from the optimisation. We start by having two different functions returning the two categories of possible "improvement".

upgrade: update the copyright statement

upgrade: update the header comment

upgrade: import 'localrepo' globally The in-function imports mention a cycle that seems to no longer be relevant. As a result, we just import it globally.

largefiles: set the extension as enabled locally after a share requiring it This has been done for clone since e1dbe0b215ae, so it makes sense here for the same reasons.

windows: add context manager support to mixedfilemodewrapper I stumbled into this in the next patch. The difference between getting a context manager capable object or not from vfs classes was as subtle as adding a '+' to the file mode.

chg: always wait for pager Previously, when runcommand raises, chg aborts with, and does not wait for pager. The call stack is like: hgc_runcommand -> handleresponse -> readchannel -> debugmsg("failed to read channel") -> exit(255) That means, chg returns to the shell, then both the pager and the shell will read from the terminal at the same time, causing problems. This patch fixes that by using "atexit" to register the pager cleanup function so chg will always wait for pager even if runcommand raises.

bundle2: move 'seek' and 'tell' methods off the unpackermixin class These methods are unrelated to unpacking. They are used internally by the 'unbundlepart' class only. So me move them there as private methods. In the same go, we clarify their internal role in the their docstring.

shelve: rename nodestoprune to nodestoremove As per feedback from the community.

templater: port pad() to take keyword arguments This is another example where keyword arguments can be actually useful.

templater: add support for keyword arguments Unlike revset, function arguments are pre-processed in templater. That's why we need to define argspec per function. An argspec field looks somewhat redundant in @templatefunc definition as a name field contains human-readable list of arguments. I'll make function doc be built from argspec later. Ported separate() function as an example.

templater: add parsing rule for key-value pair Based on the revset implementation, 70a2082f855a. This patch also adjusts the test as '=' is now a valid token.

templater: adjust binding strengths to make room for key-value operator Changed as follows: - template ops (%, |): +10 - arithmetic ops: +1 (but "negate" should be greater than "%")

templater: sort token table by binding strength Just for readability.

templater: make _hybrid provide more list/dict-like methods So the JSON filter works.

templater: hide private variable of _hybrid

templater: remove __iter__() from _hybrid, resolve it explicitly The goal is to fix "{hybrid_obj|json}" output. A _hybrid object must act as a list or a dict as well as a generator of legacy template strings. Before, _hybrid.__iter__() was assigned for legacy template, which conflicted with list.__iter__() API. This patch drops _hybrid.__iter__() and makes stringify/flatten functions unwrap a generator instead.

templater: rewrite doc of _hybrid class as docstring

sortdict: fix .pop() to return a value My future patch will need it.

checkcode: only match pushd/popd as word otherwise it partially match common words like "pushdestination".