util: add a simple poll utility We'll use it to detect when a sshpeer have server output to be displayed. The implementation is super basic because all case support is not the focus of this series.

crecord: fix blue artifact bug coming back from help screen Before this patch, with record's curses interface: - When one pressed the ? key to see the help menu and then leaves the help menu - Then, blue artifacts would remain on the screen This patch forces a screen clear / refresh after coming back from the help menu. Since we don't have UI test for crecord I checked on my machine that the bug does not reproduce.

scmutil: consistently return subrepos relative to ctx1 from itersubrepos() Previously, if a subrepo was added in ctx2 and then compared to another without it (ctx1), the subrepo for ctx2 was returned amongst all of the ctx1 based subrepos, since no subrepo exists in ctx1 to replace it in the 'subpaths' dict. The two callers of this, basectx.status() and cmdutil.diffordiffstat(), both compare the yielded subrepo against ctx2, and thus saw no changes when ctx2's subrepo was returned. The tests here previously didn't mention 's/a' for the 'p1()' case. This appears to have been a known issue, because some diffordiffstat() comments mention that the subpath disappeared, and "the best we can do is ignore it". I originally ran into the issue with some custom convert code to flatten a tree of subrepos causing hg.putcommit() to abort, but this new behavior seems like the correct status and diff behavior regardless. (The abort in convert isn't something users will see, because convert doesn't currently support subrepos in the official repo.)

context: introduce the nullsub() method Ultimately, this will be used by scmutil. The subrepo module already imports it, so it can't import the subrepo module to access the underlying method.

subrepo: introduce the nullsubrepo() method This will be used in an upcoming patch. It's a one-off use, but seems better to be contained in the subrepo module, than for the next patch to overwrite the _ctx and _state fields in another module. '' is used as the default revision in subrepo.state() if it can't be found, so it seems like a safe choice.

ssl: prompt passphrase of client key file via ui.getpass() (issue4648) This is necessary to communicate with third-party tools through command-server channel. This requires SSLContext backported to Python 2.7.9+. It doesn't look nice to pass ui by sslkwargs, but I think it is the only way to do without touching various client codes including httpclient (aka http2). ui is mandatory if certfile is specified, so it has no default value. BTW, test-check-commit-hg.t complains that ssl_wrap_socket() has foo_bar naming. Should I bulk-replace it to sslwrapsocket() ?

https: do not inherit httplib.HTTPSConnection that creates unused SSLContext HTTPSConnection of Python 2.7.9 creates SSLContext in __init__, which involves a password prompt for decrypting the private key. This means the password was asked twice, one for unused SSLContext, and next for our ssl function. Because our httpsconnection replaces connect() method at all, we can simply drop httplib.HTTPSConnection. Instead, class and instance attributes are copied from it. HTTPSConnection of Python 2.7.8 and 2.6.9 seem to have no such problem. https://hg.python.org/cpython/file/v2.7.9/Lib/httplib.py#l1183

test-https: test basic functions of client certificate authentication Because hgweb doesn't support client certificates, I just patched it to require client certificates that are signed and verified by the server certificate. This won't be ideal for production servers, but should be okay for the test. The encrypted key file will be used by future patches. I couldn't figure out a way to redirect a password prompt provided by OpenSSL, so it isn't tested for now.

phases: add `hg help phases` hint to failures to edit public commits There were a couple of locations that were missing this hint after an edition of some kind failed due to the public phase.

phases: rewrite "immutable changeset" to "public changeset" The phrase "cannot edit immutable changeset" is kind of tautological. Of course unchangeable things can't be changed. We instead mention "public" and provide a hint so that we can point to the actual problem. Even in cases where some operation other than edition cannot be performed, "public" gives the root cause that results in the "immutable" effect. There is a precedent for saying "public" instead of "immutable", for example, in `hg commit --amend`.

revlog: raise an exception earlier if an entry is too large (issue4675) Before we were relying on _pack to error out when trying to pass an integer that was too large for the "i" format specifier. Now we check this earlier so we can form a better error message. The error message unfortunately must exclude the filename at this level of the call stack. The problem is that this name is not available here, and the error can be triggered by a large manifest or by a large file itself. Although perhaps we could provide the name of a revlog index file (from the revlog object, instead of the revlogio object), this seems like too much leakage of internal data structures. It's not ideal already that an error message even mentions revlogs, but this does seem unavoidable here.

wix: move library.zip and all *.pyd into a lib/ folder This makes the root install folder (on Windows) nice and tidy. The only files left in the root folder are: hg.exe python27.dll COPYING.rtf ReadMe.html the last of which was probably out-of-date 7 years ago

sshpeer: run the ssh command unbuffered This is necessary to use non-blocking IO base on polling. Such polling is needed to restore real time output with ssh peer. Changeset fce065538bcf is talking about 5x regression on Mac OS X when playing with this value. So we introduced our own buffering layer in previous changesets. This seems to keep the regression away (we are even issuing much less read).

sshpeer: use a 'bufferedinputpipe' for standard output of the ssh process We need this pipe to still be buffered when will switch to unbuffered pipe. (switch motivated by the need of using polling to restore real time output from ssh server). This is the only pipe that needs to be wrapped because this is the one who do extensive usage of 'readline'. The stderr pipe of the process is alway read in non blocking raw chunk, so it won't benefit from the buffering.

util: introduce a bufferedinputpipe utility To restore real time server output through ssh, we need to using polling feature (like select) on the pipes used to communicate with the ssh client. However we cannot use select alongside python level buffering of these pipe (because we need to know if the buffer is non-empty before calling select). However, unbuffered performance are terrible, presumably because the 'readline' call is issuing 'read(1)' call until it find a '\n'. To work around that we introduces our own overlay that do buffering by hand, exposing the state of the buffer to the outside world. The usage of polling IO will be introduced later in the 'sshpeer' module. All its logic will be very specific to the way mercurial communicate over ssh and does not belong to the generic 'util' module.

test: drop all the forced use of bundle2 Using bundle2 during exchange is now the default, we do not need all this explicit enabling of bundle2 exchange in test anymore.

bundle2: use bundle2 by default All the test change have been isolated and validated. We have free to turn on bundle2 as the default exchange protocol. "To reach a port we must set sail – Sail, not tie at anchor Sail, not drift."

wireprotocol: distinguish list and set in getbundle argument The 'bundlecaps' argument is expected to be a set, but 'listkeys' is expected to be a list where ordering matters. We introduce a new 'scsv' argument type for the 'set' version and move 'csv' to the 'list' version. 'test-ssh.t' is changed because this introduced an instability in the order we were producing listkeys parts.

exchange: support transferring .hgtags fnodes mapping On Mozilla's mozilla-beta repository .hgtags fnodes resolution takes ~18s from a clean cache on my machine. This means that the first time a user runs `hg tags`, `hg log`, or any other command that displays or accesses tags data, a ~18s pause will occur. There is no output during this pause. This results in a poor user experience and perception that Mercurial is slow. The .hgtags changeset to filenode mapping is deterministic. This patch takes advantage of that property by implementing support for transferring .hgtags filenodes mappings in a dedicated bundle2 part. When a client advertising support for the "hgtagsfnodes" capability requests a bundle, a mapping of changesets to .hgtags filenodes will be sent to the client. Only mappings of head changesets included in the bundle will be sent. The transfer of this mapping effectively eliminates one time tags cache related pauses after initial clone. The mappings are sent as binary data. So, 40 bytes per pair of SHA-1s. On the aforementioned mozilla-beta repository, 659 * 40 = 26,360 raw bytes of mappings are sent over the wire (in addition to the bundle part headers). Assuming 18s to populate the cache, we only need to transfer this extra data faster than 1.5 KB/s for overall clone + tags cache population time to be shorter. Put into perspective, the mozilla-beta repository is ~1 GB in size. So, this additional data constitutes <0.01% of the cloned data. The marginal overhead for a multi-second performance win on clones in my opinion justifies an on-by-default behavior.

bundle2: part handler for processing .hgtags fnodes mappings .hgtags fnodes cache entries can be expensive to compute, especially if there are hundreds of even thousands of them. This patch implements support for receiving a bundle2 part that contains a mapping of changeset to .hgtags fnodes. An upcoming patch will teach the server to send this part, allowing clients to bypass having to redundantly compute these values. A number of tests changed due to the client advertising the "hgtagsfnodes" capability.

changegroup: rename _computeoutgoing to computeoutgoing We're going to use this function from another module in an upcoming patch. Drop the _ prefix to mark it as non-private.

merge with stable

test-treemanifest: add globs for Windows

test-import: sync with 6084926366b9 for platforms without execbit

hgwebdir: avoid redundant repo and directory entries when 'web.name' is set Previously, when 'web.name' was set on a subrepo parent and 'web.collapse=True', the parent repo would show in the list with the configured 'web.name', and a directory with the parent repo's filesystem name (with a trailing slash) would also appear. The subrepo(s) would unexpectedly be excluded from the list of repositories. Clicking the directory entry would go right to the repo page. Now both the parent and the subrepos show up, without the additional directory entry. The configured hgweb paths used '**' for finding the repos in this scenario. A couple of notes about the tests: - The area where the subrepo was added has a comment that it tests subrepos, though none previously existed there. One now does. - The 'web.descend' option is required for collapse to work. I'm not sure what the previous expectations were for the test. Nothing changed with it set, prior to adding the code in this patch. It is however required for this test. - The only output changes are for the hyperlinks, obviously because of the 'web.name' parameter. - Without this code change, there would be an additional diff: --- /usr/local/mercurial/tests/test-hgwebdir.t +++ /usr/local/mercurial/tests/test-hgwebdir.t.err @@ -951,7 +951,7 @@ /rcoll/notrepo/e/ /rcoll/notrepo/e/e2/ /rcoll/notrepo/f/ - /rcoll/notrepo/f/f2/ + /rcoll/notrepo/f/ Test repositories inside intermediate directories I'm not sure why the fancy name doesn't come out, but it is enough to demonstrate that the parent is not listed redundantly, and the subrepo isn't skipped.

Added signature for changeset ed18f4acf435

Added tag 3.4.1 for changeset ed18f4acf435

merge with stable

templatekw: compare target context and its parent exactly (issue4690) Before this patch, template keywords `{file_mods}`, `{file_adds}` and `{file_dels}` use values gotten by `repo.status(ctx.p1().node(), ctx.node())`. But this doesn't work as expected if `ctx` is `memctx` or `workingcommitctx`. Typical case of templating with these contexts is customization of the text shown in the commit message editor by `[committemplate]` configuration. In this case, `ctx.node()` returns None and it causes comparison between `ctx.p1()` and `workingctx`. `workingctx` lists up all changed files in the working directory even at selective committing. BTW, `{files}` uses `ctx.files()` and it works as expected. To compare target context and its parent exactly, this patch passes `ctx.p1()` and `ctx` without `node()`-nize. This avoids unexpected comparison with `workingctx`. This patch uses a little redundant template configurations in `test-commit.t`, but they are needed to avoid regression around problems fixed by a4958cdb2202 and 1e6fb8db666e: accessing on `ctx` may break `ctx._status` field.

test: use bundle2 in test-pull-http This test has a minor output change when using bundle2. We make this change early to reduce the noise in the final change.