tests: demonstrate that hgweb renders "pruned" that minirst.format() returns Notice at the bottom of the help text there's "windows". It's a section that is in the original help text, but was pruned (because hgweb didn't ask for it).

rebase: avoid RevlogError when computing obsoletenotrebased (issue5907) The key to reproducing this seems to be missing an obsolete node that is not an ancestor of the destination.

rebase: prioritize indicating an interrupted rebase over update (issue5838) This should also cover the transplant extension, and any other non clearable states.

tests: demonstrate inconsistent messaging around interrupted rebases

tests: adapt test-check-pylint to run on Windows The line endings are explicitly converted because this was ending up with '\r (no-eol) (esc)' lines, in addition to the usual '\r (esc)' lines. I've seen the fakerc output on other recently installed systems though (10.13 and/or Fedora 26). Unfortunately, the output here uses '\\' on Windows, so glob away the whole path.

hghave: avoid a deadlock reading the child process's output The output of `pylint` is voluminous enough that it fills the buffer on Windows, and waited for the parent to read it out. But the parent was waiting on the child to exit. I'm not sure what the intent of setting `ret = -1` in the exception handler just above this was...

lfs: bypass wrapped functions when reposetup() hasn't been called (issue5902) There are only a handful of methods that access repo attributes that are applied in reposetup(). The `diff` test covers all of the commands that call scmutil.prefetchfiles(). Along the way, I saw that adding files and upgrading the repo format were also problems (also tested here). I don't think running `hg serve` through the commandserver is sane, but I conditionalized both the capabilities and the wsgirequest handler because it's trivially correct. It doesn't look like there has ever been a caller of candownload(), so there's no test for that path. The upload case isn't testable, because uploadblobs() bails if there are no pointers. The requirement should be added any time pointers are introduced, and that would force the extension to be loaded specifically for the repo. This covers `debuglfsupload`, the pre-push hook (which isn't set until the repo is promoted to LFS), and uploadblobsfromrevs(), which can be called by other extensions. I think readfromstore() and writetostore() are only reachable as a flag processor for revlog.REVIDX_EXTSTORED, and a requirement is added as soon as that is seen, so I don't think those are a problem.

help: correct signature of separate() template function Without the dots, it looked as if separate() would take a list of arguments.

hgweb: do not try to replace signal handlers while locking According to the issue 5889, mod_wsgi issues a warning on signal.signal() call, and we wouldn't want to see it in error log. The problem addressed by d77c3b023393 could potentially occur in web session, but that would be less likely than in user processes.

lock: add internal config to not replace signal handlers while locking signal.signal() is blocked in some WSGI environments, and a horrible warning is sent to the server log. So we need a way to disable it, and I think abusing ui.config is the simplest workaround.

merge with i18n

i18n-pt_BR: synchronized with 32a75a8a5b0f

i18n-ja: fix block indentation

i18n-ja: synchronized with 32a75a8a5b0f

httppeer: declare 'dbg' at the function level As we just saw in the previous changeset, having the variable defined into a branch creates bug. This is a cheap to move it at the function level.

httppeer: properly gate debug usage behind debug flag check The "dbg" local variable is only defined if the 'debugflag' is set to True. However, it was used indiscriminately later in the function. We hide its usage behind the 'debugflag' value to avoid raising a NameError.

push: continue without locking on lock failure other than EEXIST (issue5882) This code was added by 3f5e75c22585 "push: make locking of source optional (issue3684)", but EACCES isn't the only error that could be triggered by filesystem permission. I think catching LockUnavailable is more appropriate than testing errno value by caller.

bdiff: fix yet more fallout from xdiff long/int64 conversion (issue5885) "l" in Py_BuildValue's format string means long, so passing int64_t instead results in fireworks on 32bit architectures. Differential Revision: https://phab.mercurial-scm.org/D3538

revset: pass in lookup function to matchany() (issue5879) Silly mistake in f83cb91b052e.

test-hgweb: add test for foo-bar name lookup This is broken since f83cb91b052e "revset: pass in lookup function instead of repo (API)."

bundle2: mark the bundle2 part as advisory (issue5872) It blocks old clients to read bundle including this part. Differential Revision: https://phab.mercurial-scm.org/D3481

debugbundle: also display if a part is mandatory or advisory Most parts are mandatory but when introducing new parts, they should be advisory if included by default or old clients won't be able to process it. Differential Revision: https://phab.mercurial-scm.org/D3480

Added signature for changeset 6614cac550ae

Added tag 4.6 for changeset 6614cac550ae

filelog: don't crash on invalid copy metadata (issue5748) "copy" and "copyrev" are both supposed to appear next to each other. However, a user report demonstrated a crash that indicates that something in the wild is producing "copy" without "copyrev" (probably `hg convert`). While we should definitely fix the source of the bad metadata, the bad code causing the crash is already in the wild and who knows how many repositories are impacted. So let's be more defensive when accessing the file revision metadata.

httppeer: detect redirect to URL without query string (issue5860) 197d10e157ce subtly changed the HTTP peer's handling of HTTP redirects. Before that changeset, we instantiated an HTTP peer instance and performed the capabilities lookup with that instance. The old code had the following relevant properties: 1) The HTTP request layer would automatically follow HTTP redirects. 2) An encountered HTTP redirect would update a peer instance variable pointing to the repo URL. 3) The peer would automagically perform a "capabilities" command request if a caller requested capabilities but capabilities were not yet defined. The first HTTP request issued by a peer is for ?cmd=capabilities. If the server responds with an HTTP redirect to a ?cmd=capabilities URL, the HTTP request layer automatically followed it, retrieved a valid capabilities response, and the peer's base URL was updated automatically so subsequent requests used the proper URL. In other words, things "just worked." In the case where the server redirected to a URL without the ?cmd=capabilities query string, the HTTP request layer would follow the redirect and likely encounter HTML. The peer's base URL would be updated and the unexpected Content-Type would raise a RepoError. We would catch RepoError and immediately call between() (testing the case for pre 0.9.1 servers not supporting the "capabilities" command). e.g. try: inst._fetchcaps() except error.RepoError: inst.between([(nullid, nullid)]) between() would eventually call into _callstream(). And _callstream() made a call to self.capable('httpheader'). capable() would call self.capabilities(), which would see that no capabilities were set (because HTML was returned for that request) and call the "capabilities" command to fetch capabilities. Because the base URL had been updated from the redirect, this 2nd "capabilities" command would succeed and the client would immediately call "between," which would also succeed. The legacy handshake succeeded. Only because "capabilities" was successfully executed as a side effect did the peer recognize that it was talking to a modern server. In other words, this all appeared to work accidentally. After 197d10e157ce, we stopped calling the "capabilities" command on the peer instance. Instead, we made the request via a low-level opener, detected the redirect as part of response handling code, and passed the redirected URL into the constructed peer instance. For cases where the redirected URL included the query string, this "just worked." But for cases where the redirected URL stripped the query string, we threw RepoError and because we removed the "between" handshake fallback, we fell through to the "is a static HTTP repo" check and performed an HTTP request for .hg/requires. While 197d10e157ce was marked as backwards incompatible, the only intended backwards incompatible behavior was not performing the "between" fallback. It was not realized that the "between" command had the side-effect of recovering from an errant redirect that dropped the query string. This commit restores the previous behavior and allows clients to handle a redirect that drops the query string. In the case where the request is redirected and the query string is dropped, we raise a special case of RepoError. We then catch this special exception in the handshake code and perform another "capabilities" request against the redirected URL. If that works, all is well. Otherwise, we fall back to the "is a static HTTP repo" check. The new code is arguably better than before 197d10e157ce, as it is explicit about the expected behavior and we avoid performing a "between" request, saving a server round trip. Differential Revision: https://phab.mercurial-scm.org/D3433

hgweb: prevent triggering dummy href="#" handler Follow up for the previous patch.

paper: add href="#" to links with click handlers This restores the styling that was accidentally removed by the previous change to these files. Differential Revision: https://phab.mercurial-scm.org/D3438

paper: don't register click handlers with inline javascript (issue5812) The use of inline href="javascript:" undermines CSP policies that don't allow inline javascript. This commit changes the registering of the diffstat and line wrapping toggle handlers to the the global DOMContentLoaded handler, thus eliminating all inline javascript from the paper template. Differential Revision: https://phab.mercurial-scm.org/D3437

hgweb: allow Content-Security-Policy header on 304 responses (issue5844) A side-effect of 98baf8dea553 was that the Content-Security-Policy header was set on all HTTP responses by default. This header wasn't in our list of allowed headers for HTTP 304 responses. This would trigger a ProgrammingError when a 304 response was issued via hgwebdir. This commit adds Content-Security-Policy to the allow list of headers for 304 responses so we no longer encounter the error. Differential Revision: https://phab.mercurial-scm.org/D3436

hgweb: discard Content-Type header for 304 responses (issue5844) A side-effect of 98baf8dea553 was that hgwebdir always sets a global default for the Content-Type header. HTTP 304 responses don't allow the Content-Type header. So a side-effect of this change was that HTTP 304 responses served via hgwebdir resulted in a ProgrammingError being raised. This commit teaches our 304 response issuing code to drop the Content-Type header. Differential Revision: https://phab.mercurial-scm.org/D3435

tests: add tests demonstrating ISE for HTTP 304 responses with hgwebdir There are two separate failures here. One for the Content-Type header. Another for the Content-Security-Policy header. Differential Revision: https://phab.mercurial-scm.org/D3434

hgweb: guard against empty Content-Length header Discussion in issue 5860 seems to indicate this can occur. Differential Revision: https://phab.mercurial-scm.org/D3432

test-push-http: do not clear pid file It's okay now, but we'll end up leaking daemon processes if we add some more.

debugcolor: fix crash by empty styles (issue5856)

tests: explicitly define compression engines for tests The zstd compression engine requires C extensions and isn't present in pure Python builds. The compression engine list leaks into the server capabilities string. Unless we're testing functionality specific to a compression format, the set of compression formats supported by a server doesn't matter much. So this commit explicitly defines the server's compression engines for some tests so behavior is consistent between pure and non-pure builds. Differential Revision: https://phab.mercurial-scm.org/D3431

tests: update no-zstd branch of test-treediscovery.t as in 330ada7e8ea5 This side of the test got overlooked. We should probably consider having a way to run some of our tests through a "no-zstd" case just like we run some things through a "no-obsmarkers" case, but that's not an appropriate thing for stable. Differential Revision: https://phab.mercurial-scm.org/D3430

tests: glob away content-length changes relating to missing zstd bindings This doesn't fix everything in these two tests around missing zstd: we still get some changes in the CBOR payload in ways that I think we probably shouldn't bother to glob around. Maybe we should just disable zstd support in some of these lower-level wireproto tests? Differential Revision: https://phab.mercurial-scm.org/D3429

revlog: make pure version of _partialmatch() support 40-byte hex nodeids Without this patch, test-histedit-arguments.t would fail when run with --pure. It turned out to be because the pure version of _partialmatch() does not support full 40-byte hex nodeids. When histedit's instructions include things like "pick tip", it resolves the "tip" revision early to a full nodeid (but plain hex nodeid prefixes are not resolved to full nodeids). Then the nodeid (full or not) is looked up using to a full nodeid later. This step is what fails in pure mode. It has been failing since my c4131138eadb (histedit: look up partial nodeid as partial nodeid, 2018-04-06). I haven't verified, but I suspect histedit instructions like "pick <full hex nodeid>" would have been failing before my commit too, though. The fix is trivial: change a "< 40" to "<= 40". Differential Revision: https://phab.mercurial-scm.org/D3428

hgweb: reuse body file object when hgwebdir calls hgweb (issue5851) An unintended side-effect of f0a851542a05 was that the request body file object (which uses a util.cappedreader) was constructed twice when hgwebdir called into hgweb. Since we attempt to read all remaining data from this file object when Content-Length is defined and since there were two instances of this object and the client supplied no additional data to read, this resulted in deadlock. The fix implemented in this commit is to reuse the request body file object when it is passed from hgwebdir to hgweb. A test demonstrating `hg clone` and `hg push` via hgwebdir has been added. Without this patch, the test hangs when doing `hg clone`. Surprisingly, this must mean that we have effectively no test coverage of the wire protocol when run via hgwebdir. Differential Revision: https://phab.mercurial-scm.org/D3427

remotenames: mark the extension as EXPERIMENTAL I still don't feel confident about locking the behavior of all the things in the remotenames extension. Moreover the extension was introduced in this cycle only. Let's mark this extension EXPERIMENTAL for now so that we can change things especially the storage layer if required in next cycle. I will like to use cbor at storage layer too. Differential Revision: https://phab.mercurial-scm.org/D3426

tests: fix test-check-commit.t when all commits are public I'm 99% sure this is a portable use of /bin/[, and it seems to fix the issue I noticed on the buildbot on my machine.

import: fix crash on --exact check of empty commit (issue5702)

tests: mark test-check-interfaces.py as requiring a repo This was failing our 4.6rc1 build like this: mercurial.error.RepoError: repository /tmp/build-debs.zMTRhC/src-4.6rc1 not found Differential Revision: https://phab.mercurial-scm.org/D3425

sshpeer: reflect actual command activity one handshake The output from devel-peer-request is expected to give data about request and roundtrip done to the server. Changeset a9cffd14aa04 changed some of that by grouping hello and between commands call. However, the old sequence of command was "emulated" in sshpeer. Update the sshpeer to reflect this grouping of commands and update the tests that use it.

tests: drop a useless glob in test-infinite-bundlestore.t With the previous breakage tamed, the lack of test output difference was causing the test runner to report "no result code from test" because of this glob.

infinitepush: ensure fileindex bookmarks use '/' separators (issue5840) After loading up with status messages, I noticed that the subsequent matcher was rejecting 'scratch\mybranch' on Windows. No bookmarks were reported back, and the tests subsequently failed. I did a search for 'match', and nothing else looks like it needs to be fixed up, but someone who understands this code should also take a look. I also tried setting `infinitepush.branchpattern=re:scratch\\.*` in library-infinitepush.sh without this change, but that didn't work. Still, should we ban '\' in these bookmarks to avoid confusion? I thought I saw code that sandwiches a pattern between 're:^' and '.*', so perhaps regex characters will need special care? I also noticed comments in externalbundlestore.{read,write} that it won't work on Windows because of opening an open file. But I don't see a test failure, so this may lack test coverage.

interfaceutil: module to stub out zope.interface The startup time of `hg` increased during the 4.6 development cycle. A cause of that was importing more modules and doing more work at module import time. The import of zope.interface and the declaring of various interfaces is partially responsible for the startup time regression. Our current usage of zope.interface doesn't do much at run time: we are merely declaring interfaces and stating that certain types implement various interfaces. Core Mercurial is not (yet) using of any of zope.interface features that actually require that interface plumbing be defined. The only place we actually need the interface metadata is in test-check-interfaces.py. This commit establishes a new interfaceutil module. It exposes the subset of the zope.interface API that we currently use. By default, the APIs no-op. But if an environment variable is set, we export the real zope.interface APIs. Existing importers of zope.interface have been converted to use the new module. test-check-interfaces.py has been updated to define the environment variable so the real zope.interface is used. The net effect of this change is we stop importing 9 zope.interface.* modules and we no longer perform interface bookkeeping when registering interfaces. On my i7-6700K on Linux, a shell loop that runs `hg log -r .` 300 times on a repo with 1 commit shows a significant CPU time improvement (average of 4 runs): 4.5: 14.814s before: 19.028s after: 16.945s And with `run-tests.py -j10` (single run): 4.5: ~3100s (~51.7m) before: ~4450s (~74.2m) after: ~3980s (~66.3m) So this claws back about half of the regressions in 4.6. Differential Revision: https://phab.mercurial-scm.org/D3419

test-fix: normalize precision of mtime copied by 'cp -p' Appears that MSYS cp only copies mtime in seconds.

merge stable heads

Added signature for changeset 1ec874717d8a

Added tag 4.6rc1 for changeset 1ec874717d8a

internals: correct capitalization of 'compression' stream level parameter

test-check-code: prevent from adding Python modules shadowed by ancient C

diffhelper: rename module to avoid conflicts with ancient C module (issue5846) Historically we had had C extensions in mercurial/, which shadows the pure Python modules of the same name forever unless we do clean build/install. I'm sloppy to think about new name, so just dropped the "s".

diffhelpers: backport 9e40bc4c1bde from C implementation 9e40bc4c1bde just says "harden testhunk." I don't think this would be the case, but it makes some sense to avoid negative index.

version: make parser more robust for rc variants and ill-formed strings

phabricator: specify some metadata compatibly with arc Differential Revision: https://phab.mercurial-scm.org/D3414

diff: restore original color scheme for worddiff I'm not young. "red dim" is nearly invisible, and "red" vs "red dim" is too subtle to see difference. And, "underline" is necessary to highlight whitespace changes.

test-fix: fix use of 'f --newer' to check that foo.whole is not updated Here we want to assert not 'mtime(foo.whole.orig) < mtime(foo.whole)'. The condition has to be inverted since 'f --newer' says "newer" if the mtimes match. Alternatively, we could insert 'sleep 2' before 'cp' to ensure that foo.whole.orig is newer than foo.whole, but a fewer sleeps should be better.