dirstate-v2: complain early on docket name collision The alternative is that the dirstate gets deleted so the corruption persists and is hard to investigate. This happened to me in tests, where the dirstate names are taken from file, since the file got reverted. I expect this can also happen in prod with non-trivial probability (1/4 billion).

setup: further improve the error path for version retrieval This is a new take at the problem that 8d390a13474d tried to tackle. There was two issues after that previous improvement: - the 0.0+ version could survive a bit too long and reaching the installer version and staying there. - multiple use case where still failing. So the new code is better at: - always succeeding when running `make local` so that we can bootstrap a local version - no using that fallback outside of `make local` to avoid distribution of version with the buggy version number. The setup.py is a gigantic pile of spaghetti code, to the point where pastafarian pilgrim started knocking at its core. However I refrained from cleaning that up since the more to a `setup.cfg` means this code should be deleted soon™.

dirstate: handle missing backup file on restoration This is the stable counter part to e358f6e0e50e. Since 6.4 will stop writing undo.dirstate in some case (actually… at all), a transaction created with 6.4 and recover/rolledback with 6.3 need to work to a certain degreee. This changeset add the necessary bits so that we don't get a traceback from 6..3 in this cases.

tag: disallow tagging the working directory It's kinda silly, but a clear error message is better than a stacktrace about subscripting `None` when trying to generate the default commit message. I'm surprised that `.revsingle(..).node()` returns None instead of `nodemod.wdirid`, but now there's a test to catch if this changes.

test: fix the flakyness in test-remotefilelog-local.t I now get about 80% of my `test-chg` CI run that fails on flakyness in this tests. It turns out this is only ambiguous status that end up doing file download. So… calling status early will do that potential download separately and the calls we scrutinize during that test will be just fine.

fix: add more information to the debug output The previous debug output did not help to understand which file where fixed in which revision. The new output should cover that.

hgweb: unbyteify the 100-continue check The environment seems to be `str` or `tuple[int]`, and the same check in `wsgicgi.py` is already `str` based, so I suspect this was wrong. I think what happened here is that the string wasn't `r''` prefixed in 482d6f6dba91 like `wsgicgi.py`, so it got wrongly byteified in 687b865b95ad when converting to byte literals en masse.

setup: treat error output and non-zero return code differently Choking on Mercurial's stderr mean armless warning can derails the whole install process. We do like to be able to issue warning to people so we stop considering any stderr is a fatal mistake. This allow us to actually boostrap a version of Mercurial without loosing to many sanity point. For example in case where evolve is not loaded, something that happens when the recorded version is malformatted. Creating a wonderful ouroboros.

setup: make the version computation process more resistant The tag fetching might return and empty string¹, from there everything derails quickly. As setup tools becomes more picky about version format we make the whole seems a bit more robust. The resulting version will be obviously weird, but at least it will actually install itself. [1] This is a problem we will address in the next changesets.

bundlerepo: enforce the requirements declared by the underlying repository Previously, `hg log -r 'bundle()' -R bundle.hg` was failing for me when run from source, complaining about an unknown parent, when the system installed `hg` didn't. Some debugging showed the index was 0 length. It turned out that I didn't have the C extensions compiled, which a simple `hg log -r .` was able to indicate. The problem being that the RequirementError got handled by RepoError, which uses an empty directory as a fallback to process the bundle.

scmutil: make checknewlabel() allow "_" in otherwise numeric names (issue6737)

rust-narrow: fix loop that never loops This was caught by `clippy`. I guess the narrow tests leave something to be desired, since this previously only checked the first valid pattern.

hghave: refactor checks for pygments versions using checkvers()

hghave: make different has_pyoxidizer functions have different names There are 3 of them, and them all having the same name triggered code checkers.

tests: pygments 2.14+ highlight whitespace in python code

tests: make sure pygments can detect python script without extension This .t file was failing for me when running run-tests.py with python3.11. Then I tried to run it with python3.10 and it failed anyway, even though it's the default python3 interpreter. But with `python3 ./run-tests.py` it worked fine. And this is what I found while looking at the way pygments lexer checks if a file without extension is likely to be a python script: shebang_matches(text, r'pythonw?(3(\.\d)?)?') Take guess why it doesn't work for python >= 3.10. To work around this issue, we can simply hardcode an "easier" shebang for pygments. This path to python interpreter obviously doesn't need to be accurate, since we're not running this script.

convert: brz 3.3.0 moved NoSuchFile exception to breezy.transport

revset: the `random` sort should not depend on sys.maxsize (issue6770)

contrib: adjust heptapod CI flavor sizes Our CI currently runs on a number of different runners, some of which are run by Clever Cloud. By setting this environement variable, we're asking for a smaller size runner for our smaller jobs, which puts less load on the Clever Cloud infrastructure, while not affecting our overall pipeline times.

resourceutil: start using importlib.resources.files() when possible This avoids DeprecationWarnings related to our use of resources.open_binary() on Python 3.11.

tests: fix a typo in test-demandimport.t I guess we figured out why it wasn't lazy.

tests: os module is frozen in Python 3.11 (issue6786)

convert: replace repr() by pycompat.byterepr() in cvsps.py (issue6789)

convert: change socket mode from b'r+' to 'rwb' in cvs.py (issue6789) 'r+' mode used to open sockets for read/write operations, but '+' is not supported in Python 3. We're using bytes with these sockets everywhere, so the mode should have 'b'. But the mode argument has to be str, not bytes.

convert: turn the last str regex into bytes in cvs.py (issue6789) Since root is bytes, the regular expression should also be bytes.

convert: stop passing str to the dateutil API in darcs I'm sure there's a bunch more stuff in here that's broken, but this was flagged by pytype.

sparse: fix a py2 based usage of `map()` In a local pytype run, this fixes: File "/mnt/c/Users/Matt/hg/hgext/sparse.py", line 386, in debugsparse: unsupported operand type(s) for item retrieval: 'fcounts: Iterator[int]' and '0: int' [unsupported-operands] No attribute '__getitem__' on 'fcounts: Iterator[int]' File "/mnt/c/Users/Matt/hg/hgext/sparse.py", line 387, in debugsparse: unsupported operand type(s) for item retrieval: 'fcounts: Iterator[int]' and '1: int' [unsupported-operands] No attribute '__getitem__' on 'fcounts: Iterator[int]' File "/mnt/c/Users/Matt/hg/hgext/sparse.py", line 388, in debugsparse: unsupported operand type(s) for item retrieval: 'fcounts: Iterator[int]' and '2: int' [unsupported-operands] No attribute '__getitem__' on 'fcounts: Iterator[int]'

histedit: byteify the help for the multifold action While there's some allowance for str in `_()`, it's commented to be for "goofy unicode docstrings in test", so no idea how well that works, but it should at least come back as bytes. With HGPLAIN, however, the str isn't touched and is returned as-is, so this seems like a real bug.

tests: optional PEP 657 error location in test-lfs-serve-access.t (issue6782)

tests: optional PEP 657 error location in test-extension.t (issue6781)

tests: filter out PEP 657 error locations in tracebacks (issue6780) https://docs.python.org/3/whatsnew/3.11.html#whatsnew311-pep657

relnotes: last-minute addition to 6.3.2

relnotes: add 6.3.2

Added signature for changeset 59466b13a3ae

Added tag 6.3.2 for changeset 59466b13a3ae

filemerge: fix crash when using filesets in [partial-merge-tools] Without this patch, you'd get `mercurial.error.ProgrammingError: fileset expression with no context`.

packaging: add dependencies to the PyOxidizer build on macOS Otherwise, we get a bunch of test failures for missing things like pygments, or tests skipped entirely. The input file is a copy/paste from the equivalent Windows file, but with dulwich, pygit2, and pytest-vcr commented out because the build process errors out with them, flagging them as incompatible with loading from memory. I have no idea if that's actually true or not, because I've noticed that if I don't `make clean` after every build, the next build flags the watchman stuff as incompatible with loading from memory. The remaining failures are: Failed test-alias.t: output changed Failed test-basic.t: output changed Failed test-check-help.t: output changed Failed test-commit-interactive.t: output changed Failed test-extension.t: output changed Failed test-help.t: output changed Failed test-i18n.t: output changed Failed test-log.t: output changed Failed test-qrecord.t: output changed Failed test-share-safe.t: output changed Most of the issues seem related to loading help for disabled extensions from `hgext.__index__`, namely the full extension help being unavailable, not being able to resolve what commands are provided by what extension, and not having the command level help available. test-log.t, test-commit-interactive.t, and test-i18n.t look like i18n (or lack thereof) issues. test-basic.t is just odd: @@ -55,7 +55,7 @@ On Python 3, stdio may be None: $ hg debuguiprompt --config ui.interactive=true 0<&- - abort: Bad file descriptor (no-rhg !) + abort: response expected abort: response expected (rhg !) [255] $ hg version -q 0<&-

tests: conditionalize path output for in-memory pyoxidizer resources

tests: conditionalize test output for in-filesystem pyoxidizer resources The in-memory pyoxidizer builds apparently behave as expected.

hghave: add predicates for embedded and filesystem pyoxidizer resources There are a handful of tests with different output between the two flavors of pyoxidizer builds (like the location of the modules and templates), and a few others that avoid `known-bad-output` cases with the embedded resources that shouldn't cause the tests to fail.

run-tests: support --pyoxidized on macOS We should definitely be able to test this before releasing it with an installer.

make: add a target for building pyoxidizer tests on macOS The resources seem to be embedded inside the binary, but for some reasons they aren't read there. And since they are embedded, they aren't staged by the build in the `lib` directory like on Windows. So copy them from the repo. We can figure out what's going wrong later.

copyright: update to 2023

bisect: correct message about aborting an in-progress bisect (issue6527) By using a custom cmdhint message here we're avoiding automatic hint generation in _statecheck.hint(), which would suggest 'hg bisect --continue' and 'hg bisect --abort' (neither of which is a valid option). This patch is only fixing the message about in-progress bisect, it doesn't modify the unfinished state checking logic.

tests: document what the other currently enabled pylint check ensures

hghave: detect newer pylint Older versions (e.g. 2.7.2) say: "Usage: pylint [options]" Newer versions (e.g. 2.15.5) say: "usage: pylint [options]"

emitrevision: consider ancestors revision to emit as available base This should make more delta base valid. This notably affects: * case where we skipped some parent with empty delta to directly delta against an ancestors * case where an intermediate snapshots is stored. This change means we could sent largish intermediate snapshots over the wire. However this is actually a sub goal here. Sending snapshots over the wire means the client have a high odd of simply storing the pre-computed delta instead of doing a lengthy process that will… end up doing the same intermediate snapshot. In addition the overall size of snapshot (or any level) is "only" some or the overall delta size. (0.17% for my mercurial clone, 20% for my clone of Mozilla try). So Sending them other the wire is unlikely to change large impact on the bandwidth used. If we decide that minimising the bandwidth is an explicit goal, we should introduce new logic to filter-out snapshot as delta. The current code has no notion explicite of snapshot so far, they just tended to fall into the wobbly filtering options. In some cases, this patch can yield large improvement to the bundling time: ### data-env-vars.name = mozilla-try-2019-02-18-zstd-sparse-revlog # benchmark.name = perf-bundle # benchmark.variants.revs = last-100000 before: 68.787066 seconds after: 47.552677 seconds (-30.87%) That translate to large improvement to the pull time : ### data-env-vars.name = mozilla-try-2019-02-18-zstd-sparse-revlog # benchmark.name = pull # benchmark.variants.issue6528 = disabled # benchmark.variants.revs = last-100000 before: 142.186625 seconds after: 75.897745 seconds (-46.62%) No significant negative impact have been observed.

sqlitestore: add an `ancestors` method We will need it during bundling. The implementation mirror the one in revlog.

emitrevision: if we need to compute a delta on the fly, try p1 or p2 first Falling back to `prev` does not yield any real value on modern storage and result in pathological changes to be created on the other side. Doing a delta against a parent will likely be smaller (helping the network) and will be safer to apply on the client (helping future pulls by Triggering intermediate snapshop where they will be needed by later deltas).

emitrevision: simplify the fallback to computed delta Not using the stored delta, or having a full snapshot on disk behave the same ways, so lets use the same code path for that, this is simpler, and it update will be simpler.

emitrevision: also check the parents in the availability closure One of the point of having a closure is to gather the logic in it. So we gather the logic. The `parents[:]` part is a bit ugly but will be replaced by better code soon anyway.

emitrevision: add a small closure to check if a base is usable We will make more use of this and make it more complex too.

chg: scale the timeout in test with the rest This should avoid some flakiness where the logs reports server shutting down.

hghave: we might need py310 and py311 at some point Some tests are already showing slightly different results on Python 3.11. The better idea would be to make them more portable, but if that's not possible, now we can use hghave detection for certain lines. I wonder if there will ever be Python 31.0 and 31.1 though.

hghave: detect Python 3.10 and 3.11 as well Noticed because test-contrib-relnotes.t was skipped.

extensions: load help from hgext.__index__ as a fallback this time Prior to 843418dc0b1b, `hgext.__index__` was consulted first if present, which caused the longer help from the extension modules to be ignored, even when available. But that change causes a bunch of test failures when the pyoxidized binary bundles *.pyc in the binary, saying the there's no help topic for `hg help $disabled_extension` and suggesting the use of `--keyword`, rather than showing a summary and indicating that it is disabled. Current failures were in test-check-help.t, test-extension.t, test-help.t, and test-qrecord.t. Ideally, we would read the various *.pyc files from memory and slurp in the docstring, but I know that they used to not be readable as resources, and I can't figure out how to make it work now. So maybe 3.9 and/or the current PyOxidizer doesn't support it yet. I got closer in py2exe with `importlib.resources.open_binary("hgext", "rebase.pyc")`, but `open_binary()` on *.pyc fails in pyoxidizer.[1] Either way, the *.pyc can't be passed to `ast.parse()` as `extensions._disabledcmdtable()` is doing, so I'm setting that aside for now. [1] https://github.com/indygreg/PyOxidizer/issues/649

extensions: process disabled external paths when `hgext` package is in-memory This fixes `hg help -e ambiguous` in test-helpt.t:2055 with the `ambiguous = !./ambiguous.py` configuration, when `hgext` is not in the filesystem (e.g. pyoxidizer builds with in-memory resources, or TortoiseHg with py2exe), but the disabled external extension is. Now instead of aborting with a suggestion to try `--keyword`, the help command prints text for the extension.

hg: show the correct message when cloning an LFS repo with extension disabled The `extensions._disabledpaths()` doesn't handle fetching help from `__index__`, so it returns an empty dictionary of paths. That means None is always returned from `extensions.disabled_help()` when embedding resources inside the pyoxidizer or py2exe binary, regardless of the arg or if is an external extension stored in the filesystem. And that means wrongly telling the user with an explicitly disabled LFS extension that it will be enabled locally upon cloning from an LFS remote. That causes test-lfs-serve.t:295 to fail. This effectively reverts most of the rest of 843418dc0b1b, while keeping the help text change in place (which was specifically identified as a problem).

demandimport: fix a crash in LazyFinder.__delattr__ I was tinkering with `with hgdemandimport.deactivated()` wrapped around loading the keyring module, and got spew that seemed to be confirmed by PyCharm. But I can't believe we haven't seen this before (and phabricator uses the same pattern): ** Unknown exception encountered with possibly-broken third-party extension "mercurial_keyring" 1.4.3 (keyring 23.11.0, backend unknown) ** which supports versions unknown of Mercurial. ** Please disable "mercurial_keyring" and try your action again. ** If that fixes the bug please report it to https://foss.heptapod.net/mercurial/mercurial_keyring/issues ** Python 3.9.15 (main, Oct 13 2022, 04:28:25) [GCC 7.5.0] ** Mercurial Distributed SCM (version 6.3.1) ** Extensions loaded: absorb, attorc 20220315, blackbox, eol, extdiff, fastannotate, lfs, mercurial_keyring 1.4.3 (keyring 23.11.0, backend unknown), phabblocker 20220315, phabricator 20220315, purge, rebase, schemes, share, show, strip, uncommit Traceback (most recent call last): File "/usr/local/bin/hg", line 59, in <module> dispatch.run() File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 143, in run status = dispatch(req) File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 232, in dispatch status = _rundispatch(req) File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 276, in _rundispatch ret = _runcatch(req) or 0 File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 451, in _runcatch return _callcatch(ui, _runcatchfunc) File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 461, in _callcatch return scmutil.callcatch(ui, func) File "/usr/local/lib/python3.9/site-packages/mercurial/scmutil.py", line 153, in callcatch return func() File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 441, in _runcatchfunc return _dispatch(req) File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 1265, in _dispatch return runcommand( File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 899, in runcommand ret = _runcommand(ui, options, cmd, d) File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 1277, in _runcommand return cmdfunc() File "/usr/local/lib/python3.9/site-packages/mercurial/dispatch.py", line 1263, in <lambda> d = lambda: util.checksignature(func)(ui, *args, **strcmdopt) File "/usr/local/lib/python3.9/site-packages/mercurial/util.py", line 1880, in check return func(*args, **kwargs) File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 962, in cmd_keyring_check user, pwd, source, final_url = handler.get_credentials( File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 497, in get_credentials keyring_pwd = password_store.get_http_password(keyring_url, actual_user) File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 287, in get_http_password return self._read_password_from_keyring( File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 335, in _read_password_from_keyring keyring = import_keyring() >> `with hgdemandimport.deactivated()` inserted here File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 120, in import_keyring return _import_keyring() File "/root/mercurial_keyring/mercurial_keyring/mercurial_keyring.py", line 133, in _import_keyring mod, was_imported_now = meu.direct_import_ext( File "/usr/lib/python3.9/site-packages/mercurial_extension_utils.py", line 1381, in direct_import_ext __import__(module_name) File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 46, in exec_module self.loader.exec_module(module) File "/usr/lib/python3.9/site-packages/keyring/__init__.py", line 1, in <module> from .core import ( File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 46, in exec_module self.loader.exec_module(module) File "/usr/lib/python3.9/site-packages/keyring/core.py", line 11, in <module> from . import backend, credentials File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 46, in exec_module self.loader.exec_module(module) File "/usr/lib/python3.9/site-packages/keyring/backend.py", line 13, in <module> from .py312compat import metadata File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 46, in exec_module self.loader.exec_module(module) File "/usr/lib/python3.9/site-packages/keyring/py312compat.py", line 10, in <module> import importlib_metadata as metadata # type: ignore File "<frozen importlib._bootstrap>", line 1007, in _find_and_load File "<frozen importlib._bootstrap>", line 986, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 680, in _load_unlocked File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 46, in exec_module self.loader.exec_module(module) File "/usr/lib/python3.9/site-packages/importlib_metadata/__init__.py", line 715, in <module> class MetadataPathFinder(NullFinder, DistributionFinder): File "/usr/lib/python3.9/site-packages/importlib_metadata/_compat.py", line 24, in install disable_stdlib_finder() File "/usr/lib/python3.9/site-packages/importlib_metadata/_compat.py", line 43, in disable_stdlib_finder del finder.find_distributions File "/usr/local/lib/python3.9/site-packages/hgdemandimport/demandimportpy3.py", line 88, in __delattr__ return delattr(object.__getattribute__(self, "_finder")) TypeError: delattr expected 2 arguments, got 1

tests: use `test -f` instead of `ls` to see if a file is present (issue6662) ls's exit code when file doesn't exist is 2 on Linux and 1 on NetBSD, so let's use something that's supposedly more portable, since we only care whether the file is there or not.