copies: delete misplaced comment The comment was added in 78d760aa3607 (duplicatecopies: do not mark items not in the dirstate as copies, 2013-03-28). It became misplaced in 3666331164bb (cmdutil: add copy-filtering support to duplicatecopies, 2014-06-07). Then the relevant code was moved far away in 754b5117622f (context: add workingfilectx.markcopied, 2017-10-15). Differential Revision: https://phab.mercurial-scm.org/D6352

phabricator: include branch in the phabread output Depends on D6301 Differential Revision: https://phab.mercurial-scm.org/D6302

phabricator: fallback to reading metadata from diff for phabread Differential Revision: https://phab.mercurial-scm.org/D6301

phabricator: include commit (node) and parent in the local:commits metadata Differential Revision: https://phab.mercurial-scm.org/D6298

copies: remove redundant filtering of ping-pong renames in _chain() We already handle the ping-pong rename case in the filtering step, so there's very little point in doing it in the chaining loop (ping-pong renames are very rare, so I'm not worried about the cost of adding it and then removing it again). Differential Revision: https://phab.mercurial-scm.org/D6344

repair: reword comments that I noticed while working on source formatting I think this is clearer, and one will also keep us from upsetting check-code when other formatting cleanups happen. Differential Revision: https://phab.mercurial-scm.org/D6339

gendoc: nest command headers under category headers Differential Revision: https://phab.mercurial-scm.org/D6329

minirst: support subsubsubsubsections (header level 5) with marker '''' Differential Revision: https://phab.mercurial-scm.org/D6328

gendoc: guarantee that all commands were processed The new logic renders the commands belonging to each category in turn. Commands with an unregistered category are at risk of getting skipped because their category is not in the list. By comparing the list of all commands to a log of processed commands, we can detect commands with unregistered categories and fail with an error message. Differential Revision: https://phab.mercurial-scm.org/D6327

gendoc: group commands by category in man page and HTML help Make Mercurial's man page and HTML help group commands by category, and present the categories in a helpful order. `hg help` already does this; this patch uses the same metadata. This patch uses the same header level for command categories and for commands. A subsequent patch will push the command headers down one level. Differential Revision: https://phab.mercurial-scm.org/D6326

gendoc: indent loop to make next patch more legible Differential Revision: https://phab.mercurial-scm.org/D6325

contrib: have byteify-strings explode if run in Python 2 Differential Revision: https://phab.mercurial-scm.org/D6341

repair: reword comment about bookmarks logic Again, this will help auto-formatting shortly. Differential Revision: https://phab.mercurial-scm.org/D6340

monotone: fix a bogus _() wrapper that was caught when formatting code There was a spurious space after `debug`, which hid the _() inside ui.debug() from check-code. Sigh. While here, wrap things more concisely. Differential Revision: https://phab.mercurial-scm.org/D6338

commit: add ability to print file status after each successful invocation When commands.commit.post-status is enabled, `hg commit` will effectively run `hg status -mardu` after committing. It can help catch mistakes like not committing all needed files or not adding unknown files that should've been part of the just created commit.

tests: flatten repo structure in test-commit.t Let's move to parent directory before `hg init` repos, since they don't need to be nested. It makes amend/strip messages that include full path to the backup bundle shorter, for instance.

lfs: add a TODO file This is a cleaned up and reorganized list of items I sent out about a year ago. But tracking this in the repo (like the narrow extension) gives more visibility in case anyone wants to help out.

copies: make "limit" argument to _tracefile() mandatory We always pass a limit. I think the fact that it was optional was also the reason we checked ">=limit" before we used it. So now we can remove that condition too. Differential Revision: https://phab.mercurial-scm.org/D6335

localrepo: don't use defaults arguments that will never be overridden The commithook() callback will be called when the lock is released. lock.release() calls the callback without arguments, so it was quite confusing to me that this function declared extra arguments. We can just close on the variables in the outer scope instead. Differential Revision: https://phab.mercurial-scm.org/D6336

tags: avoid double-reversing a list Differential Revision: https://phab.mercurial-scm.org/D6337

updatecaches: also warm hgtagsfnodescache Now that a full update of this cache run in a reasonable amount of time, we can warm everything when during a full update.

hgtagsfnodescache: inherit fnode from parent when possible If a changeset does not update the content of `.hgtags`, it means it will use the same file-node (for `.hgtags`) as its parents. In this case we can directly reuse the parent's file-node. We use this property when updating the `hgtagsfnodescache` taking a faster path if we already have a cached value for the parents of the node we are looking at. Doing so provides a large performance boost when looking at a lot of fnodes, especially on repository with very large manifest: timing for `tagsmod.fnoderevs(ui, repo, repo.changelog.revs())` mercurial: (41907 revisions, 1923 files) before: 6.9 seconds after: 2.7 seconds (-54%) pypy: (96266 revisions, 5198 files) before: 80 seconds after: 20 seconds (-75%) mozilla-central: (463411 revisions, 272080 files) before: 7166.4 seconds after: 47.8 seconds (-99%, x150 speedup) On a copy of mozilla-try with about 35K heads ans 1.7M changesets, this moves the computation from many hours to a couple of minutes, making it more interesting to do a full warm up of this cache before computing tags (from a cold cache). There seems to be other performance low hanging fruits, like avoiding the use of changectx or a more revision centric logic. However, the new code is fast enough for my needs right now.

hgtagsfnodescache: handle nullid lookup The null revision is empty, so it `.hgtags` content is `nullid` in regards with the `hgtagsfnodescache`. Dealing with `nullid` will help with the next changeset. Before this change, feeding `nullid` to `hgtagsfnodescache.getfnode` would return a wrong result (fnode for tip).

help: register the 'gpg' command category and give it a description help.py expects extensions to register their command category in the CATEGORY_ORDER and CATEGORY_NAMES variables. Once gendoc.py orders commands by category, in the next patch, it'll assume this registration (and raise an exception on encountering any unregistered categories). Luckily, gpg is the only bundled extension with an unregistered custom category, so let's fix it. Differential Revision: https://phab.mercurial-scm.org/D6324

histedit: Speed up scrolling in patch view mode Store patchcontents into the mode state, avoiding the expensive call to ui for computing the patchcontents. Before this change in large repos histedit patch view mode can be very irresponsive.

histedit: Show file names in multiple line format

repoview: introduce a `experimental.extra-filter-revs` config The option define revisions to additionally filter out of all repository "view". The end goal is to provide and easy to way to serve multiple subset of the same repository using multiple "shares". The simplest use case of this feature is to have one view serving the public changesets and one view also serving the draft. This is currently achievable using the new `server.view` option introduced recently by Joerg Sonnenberger. However, more advanced use cases need more advanced definitions. For example some needs a view dedicated to some release branches, or view that hides security fixes to be released. Joerg Sonnenberger and I discussed this topic at the recent mini-sprint and the both of us have seen real life use cases for this. (This series got written during the same mini-sprint). The feature is fully functional, and use similar cache-fallback mechanism to ensure decent performance. However,there remaining room to ensure each share caches and hooks collaborate with each others. This will come at a later time once users start to actually test this feature on real usecase.

copies: filter out copies from non-existent source later in _chain() _changesetforwardcopies() repeatedly calls _chain(). That is very expensive because _chain() does lookups in the manifest. I hope to split up the function in two parts: 1) simple chaining, not considering end points, and 2) filter out files that don't exist in the end points (and ping-pong copies/renames). This patches gets us closer to that by moving the check for non-existent source later in the function. Now there are no more checks for "src" and "dst" in the first loop; all the filtering of invalid copies is done in the second loop. The code also looks much more consistent now. No measureable impact on `hg debugpathcopies 4.0 4.8`. That shouldn't be surprising since the only case we're doing more checks now is in case of chained copies/renames, which are quire rare in practice. Differential Revision: https://phab.mercurial-scm.org/D6277