py3: convert dict keys' to str before passing as kwargs We have pycompat.strkwargs() which converts the keys of a dict to str and returns that. Differential Revision: https://phab.mercurial-scm.org/D1798

py3: make sure we open the file to write in bytes mode Differential Revision: https://phab.mercurial-scm.org/D1797

py3: don't use dict.iterkeys() Instead of iterating of dict.iterkeys(), let's iterate of dict as that will be equivalent and dict.iterkeys() is not present in Python 3. Differential Revision: https://phab.mercurial-scm.org/D1796

py3: use pycompat.bytestr() instead of str() Differential Revision: https://phab.mercurial-scm.org/D1795

py3: make regular expressions bytes by prepending b'' Regexes start with r'' and hence transformer skips adding b'' there. # skip-blame because we are just adding b'' Differential Revision: https://phab.mercurial-scm.org/D1794

py3: slice on bytes instead of indexing Indexing returns the ascii value on Python 3. Differential Revision: https://phab.mercurial-scm.org/D1793

py3: use node.hex(h.digest()) instead of h.hexdigest() hashlib.sha1.hexdigest() returns str on Python 3. Differential Revision: https://phab.mercurial-scm.org/D1792

tests: make autodiff.py work on Python 3 This patch adds b'' to string literal to make it compatible with in-core Python 3 compatibility. # skip-blame because we are just adding b'' Differential Revision: https://phab.mercurial-scm.org/D1791

py3: use pycompat.ziplist instead of inbuilt zip zip just like map on Python 3 returns a generator object instead of list. This results in error if we try to iterate over the result once we consume it. We have added pycompat.ziplist which returns a list. Differential Revision: https://phab.mercurial-scm.org/D1790

py3: use bytes and open() instead of file() in test-diff-upgrade.t file() is not present in Python 3. Differential Revision: https://phab.mercurial-scm.org/D1789

exchange: use context manager for locks and transaction in unbundle() Note that the transactionmanager doesn't actually create a transaction -- that is done the first time .transaction() is called on it (if at all). Consequently, .close() and .release() won't do anything if no transaction has been created. This makes it a little unusual, but it still works as a context manager. Differential Revision: https://phab.mercurial-scm.org/D1841

bookmarks: use context managers for locks and transaction in pushbookmark() Differential Revision: https://phab.mercurial-scm.org/D1840

bookmarks: use context managers for lock and transaction in update() Differential Revision: https://phab.mercurial-scm.org/D1839

phase: use context managers for lock and transaction Differential Revision: https://phab.mercurial-scm.org/D1838

obsolete: use context manager for transaction in pushmarker() Differential Revision: https://phab.mercurial-scm.org/D1837

obsolete: use context manager for lock in pushmarker() Differential Revision: https://phab.mercurial-scm.org/D1836

obsolete: use context manager for transaction in createmarkers() Differential Revision: https://phab.mercurial-scm.org/D1835

visibility: improve the message when accessing filtered obsolete rev When trying to access filtered revision, it is likely because they have been obsoleted by an obs-marker. The current message shows how to access the revision anyway: abort: hidden revision '13bedc178fce'! But in the case of an obsoleted revision, the user is likely to want to update to or use the successor of the revision. We update the message to display more information about the obsolescence fate of the revision in the following cases: abort: hidden revision '13bedc178fce' is pruned! abort: hidden revision '13bedc178fce' has diverged! abort: hidden revision '13bedc178fce' was rewritten as X, Y and 2 more! Differential Revision: https://phab.mercurial-scm.org/D1591

tests: add b'' to string literals where bytes are required Since we are internally dealing with bytes only, we need to use bytes in the tests too. This is one of the many patches which will make all the tests completely use bytes. # skip-blame because we are just adding b'' Differential Revision: https://phab.mercurial-scm.org/D1788

rust: implementation of `hg` This commit provides a mostly-working implementation of the `hg` script in Rust along with scaffolding to support Rust in the repository. If you are familiar with Rust, the contents of the added rust/ directory should be pretty straightforward. We create an "hgcli" package that implements a binary application to run Mercurial. The output of this package is an "hg" binary. Our Rust `hg` (henceforth "rhg") essentially is a port of the existing `hg` Python script. The main difference is the creation of the embedded CPython interpreter is handled by the binary itself instead of relying on the shebang. In that sense, rhg is more similar to the "exe wrapper" we currently use on Windows. However, unlike the exe wrapper, rhg does not call the `hg` Python script. Instead, it uses the CPython APIs to import mercurial modules and call appropriate functions. The amount of code here is surprisingly small. It is my intent to replace the existing C-based exe wrapper with rhg. Preferably in the next Mercurial release. This should be achievable - at least for some Mercurial distributions. The future/timeline for rhg on other platforms is less clear. We already ship a hg.exe on Windows. So if we get the quirks with Rust worked out, shipping a Rust-based hg.exe should hopefully not be too contentious. Now onto the implementation. We're using python27-sys and the cpython crates for talking to the CPython API. We currently don't use too much functionality of the cpython crate and could have probably cut it out. However, it does provide a reasonable abstraction over unsafe {} CPython function calls. While we still have our fair share of those, at least we're not dealing with too much refcounting, error checking, etc. So I think the use of the cpython crate is justified. Plus, there is not-yet-implemented functionality that could benefit from cpython. I see our use of this crate only increasing. The cpython and python27-sys crates are not without their issues. The cpython crate didn't seem to account for the embedding use case in its design. Instead, it seems to assume that you are building a Python extension. It is making some questionable decisions around certain CPython APIs. For example, it insists that PyEval_ThreadsInitialized() is called and that the Python code likely isn't the main thread in the underlying application. It is also missing some functionality that is important for embedded use cases (such as exporting the path to the Python interpreter from its build script). After spending several hours trying to wrangle python27-sys and cpython, I gave up and forked the project on GitHub. Our Cargo.toml tracks this fork. I'm optimistic that the upstream project will accept our contributions and we can eventually unfork. There is a non-trivial amount of code in our custom Cargo build script. Our build.rs (which is called as part of building the hgcli crate): * Validates that the Python interpreter that was detected by the python27-sys crate provides a shared library (we only support shared library linking at this time - although this restriction could be loosened). * Validates that the Python is built with UCS-4 support. This ensures maximum Unicode compatibility. * Exports variables to the crate build allowing the built crate to e.g. find the path to the Python interpreter. The produced rhg should be considered alpha quality. There are several known deficiencies. Many of these are documented with inline TODOs. Probably the biggest limitation of rhg is that it assumes it is running from the ./rust/target/<target> directory of a source distribution. So, rhg is currently not very practical for real-world use. But, if you can `cargo build` it, running the binary *should* yield a working Mercurial CLI. In order to support using rhg with the test harness, we needed to hack up run-tests.py so the path to Mercurial's Python files is set properly. The change is extremely hacky and is only intended to be a stop-gap until the test harness gains first-class support for installing rhg. This will likely occur after we support running rhg outside the source directory. Despite its officially alpha quality, rhg copes extremely well with the test harness (at least on Linux). Using `run-tests.py --with-hg ../rust/target/debug/hg`, I only encounter the following failures: * test-run-tests.t -- Warnings emitted about using an unexpected Mercurial library. This is due to the hacky nature of setting the Python directory when run-tests.py detected rhg. * test-devel-warnings.t -- Expected stack trace missing frame for `hg` (This is expected since we no longer have an `hg` script!) * test-convert.t -- Test running `$PYTHON "$BINDIR"/hg`, which obviously assumes `hg` is a Python script. * test-merge-tools.t -- Same assumption about `hg` being executable with Python. * test-http-bad-server.t -- Seeing exit code 255 instead of 1 around line 358. * test-blackbox.t -- Exit code 255 instead of 1. * test-basic.t -- Exit code 255 instead of 1. It certainly looks like we have a bug around exit code handling. I don't think it is severe enough to hold up review and landing of this initial implementation. Perfect is the enemy of good. Differential Revision: https://phab.mercurial-scm.org/D1581

lfs: improve the error message for a missing remote blob It seems better to print the name known to the user, not the internal file. The previous code unconditionally set 'p.filename'. That potentially made the attribute None, and would be printed as such in _gitlfsremote._checkforservererror() instead of "unknown". Normally, files are printed relative to CWD, but I don't see a way to get the repo path to make that adjustment. The test modified here apparently only runs within Facebook, but a print statement confirmed the name change. I tried uploading the blob to a different remote store (so the git server never saw it), and also killing the git server and removing the blob directory, and removing the 'lfs.db' file. All resulted in a message: abort: LFS server claims required objects do not exist: bdc26931acfb734b142a8d675f205becf27560dc461f501822de13274fe6fc8a! So I have no idea how to make this test generally runnable.

filelog: add the ability to report the user facing name This will be used by lfs, but is probably generally useful. There are various bits of code that reverse engineer this from the index or data file names, but it seems better to just store it. Especially if there's experimenting with backing storage other than revlog.

hgweb: make different kinds of commits look differently on /graph Regular hg log -G uses different symbols for some graph nodes, such as commits that close branches and hidden commits. It also marks the currently checked out commit with "@". Since hg serve is sometimes used/recommended as a more visual alternative to CLI, it makes sense to port these features to hgweb. "graphnode" includes the style of a particular node and also if it's currently checked out or not, both at the same time. This is different from hg log -G (which uses templatekw.showgraphnode), where there's only place for one character, but hgweb doesn't have this limitation, since it uses <canvas> and not plain text. I'm using one string of 1 or 2 characters in this patch, it's not the most self-explanatory format, but it's concise, uses the same characters as hg log -G, and is internal to hgweb (i.e. not used for json-graph). I'm more or less fine with how things look visually, but there's still room for improvement. Feel free to criticise or point me to good-looking graphs of this kind for inspiration.

clonebundle: make it possible to retrieve the initial bundle through largefile By setting the default path early enough, we make it possible to retrieve a clone bundle as a largefile from the repository we are cloning. But... why? Clone bundle is a great feature to speeds up clone of large repository. However one of the main obstacle for clone bundle deployment is the authentication scheme. For non public project, just putting a static file on some random CDN is not an option as we have to make sure people have the proper permission to retrieves the bundle. On the other hand, 'largefiles' already have all the necessary logic to serve arbitrary binary files -after- an authentication checks. So reusing an existing large file infrastructure can be a significant shortcut to clone bundle in this kind of closed environment. The idea might seems strange, but the necessary update to the large file extensions are quite small while the benefits are huge. In addition, since all the extra logic live in the 'largefiles' extensions, core does not have to know anything about it.

largefiles: add support for 'largefiles://' url scheme This changesets allows Mercurial to transparently download content from the configured largefile store. This handle all authentication and largefile protocol details. The target usecase is to leverage largefile infrastructure for clone bundle. See next changeset for details

largefiles: add a 'debuglfput' command to put largefile into the store We add a new debug command able to add arbitrary new files into the largefile store. This will be useful for debugging, testing and other unholy usecase.

debug: add a 'debugdownload' command This command resolve and fetch and URL through the Mercurial logic. Mercurial logic add various headers (including authentication) while resolving an URL so the commands helps with building the same request Mercurial would be doing. A new test file is created because we'll add more logic regarding Mercurial download logic and it will grow to a reasonable size.

revsetlang: raise ParseError to report invalid format character It's more common in revset and templater than raising Abort. I have a couple more patches to address exceptions caused by bad format string passed to revset() template function.

revsetlang: use iterator to track current argument in formatspec()

revsetlang: unnest "if True" in formatrevspec()