subrepo: ensure "close()" execution at the end of "_initrepo()" Before this patch, "close()" for the file object opened in "_initrepo()" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "close()" execution at the end of "_initrepo()" by moving it into "finally" clause. This patch puts configuration lines into "lines" array and write them out at once, to narrow the scope of "try"/"finally" for review-ability. This patch doesn't use "vfs.write()", because: - current "vfs.write()" implementation doesn't take "mode" argument to open file in "text" mode - writing hgrc file out in binary mode may break backward compatibility

subrepo: add test whether "[paths]" is configured correctly at subrepo creation This test is added for changes in the subsequent patch. This test doesn't use "(glob)" for expected output, because "[paths]" is configured at subrepo creation by "_abssource()" using "posixpath.join()" to join path components.

subrepo: ensure "close()" execution at the end of "_cachestorehash()" Before this patch, "close()" for the file object opened in "_cachestorehash()" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "close()" execution at the end of "_cachestorehash()" by moving it into "finally" clause.

subrepo: ensure "close()" execution at the end of "_readstorehashcache()" Before this patch, "close()" for the file object opened in "_readstorehashcache()" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "close()" execution at the end of "_readstorehashcache()" by moving it into "finally" clause.

subrepo: ensure "close()" execution at the end of "_calcfilehash()" Before this patch, "close()" for the file object opened in "_calcfilehash()" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "close()" execution at the end of "_calcfilehash()" by moving it into "finally" clause.

subrepo: ensure "lock.release()" execution at the end of "_cachestorehash()" Before this patch, "lock.release()" for "self._repo" in "_cachestorehash()" of "hgsubrepo" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "lock.release()" execution at the end of "_cachestorehash()" by moving it into "finally" clause.

subrepo: ensure "lock.release()" execution at the end of "storeclean()" Before this patch, "lock.release()" for "self._repo" in "storeclean()" of "hgsubrepo" may not be executed, if unexpected exception is raised, because it isn't executed in "finally" clause. This patch ensures "lock.release()" execution at the end of "storeclean()" by moving it into "finally" clause. This patch chooses moving almost all lines in "storeclean()" into "_storeclean()" instead of indenting them for "try/finally" clauses, to keep diff simple for review-ability.

largefiles: confirm existence of outgoing largefile entities in remote store Before this patch, "hg summary" and "hg outgoing" show and count up all largefiles changed/added in outgoing revisions, even though some of them are already uploaded into remote store. This patch confirms existence of outgoing largefile entities in remote store, to show and count up only really outgoing largefile entities at "hg summary" and "hg outgoing".

largefiles: show also how many data entities are outgoing at "hg outgoing" Before this patch, "hg outgoing --large" shows which largefiles are changed or added in outgoing revisions only in the point of the view of filenames. For example, according to the list of outgoing largefiles shown in "hg outgoing" output, users should expect that the former below costs much more to upload outgoing largefiles than the latter. - outgoing revisions add a hundred largefiles, but all of them refer the same data entity in this case, only one data entity is outgoing, even though "hg summary" says that a hundred largefiles are outgoing. - a hundred outgoing revisions change only one largefile with distinct data in this case, a hundred data entities are outgoing, even though "hg summary" says that only one largefile is outgoing. But the latter costs much more than the former, in fact. This patch shows also how many data entities are outgoing at "hg outgoing" by counting number of unique hash values for outgoing largefiles. When "--debug" is specified, this patch also shows what entities (in hash) are outgoing for each largefiles listed up, for debug purpose. In "ui.debugflag" route, "addfunc()" can append given "lfhash" to the list "toupload[fn]" always without duplication check, because de-duplication is already done in "_getoutgoings()".

largefiles: show also how many data entities are outgoing at "hg summary" Before this patch, "hg summary --large" shows how many largefiles are changed or added in outgoing revisions only in the point of the view of filenames. For example, according to the number of outgoing largefiles shown in "hg summary" output, users should expect that the former below costs much more to upload outgoing largefiles than the latter. - outgoing revisions add a hundred largefiles, but all of them refer the same data entity in this case, only one data entity is outgoing, even though "hg summary" says that a hundred largefiles are outgoing. - a hundred outgoing revisions change only one largefile with distinct data in this case, a hundred data entities are outgoing, even though "hg summary" says that only one largefile is outgoing. But the latter costs much more than the former, in fact. This patch shows also how many data entities are outgoing at "hg summary" by counting number of unique hash values for outgoing largefiles. This patch introduces "_getoutgoings" to centralize the logic (de-duplication, too) into it for convenience of subsequent patches, even though it is not required in "hg summary" case.

largefiles: add tests for summary/outgoing improved in subsequent patches This patch adds tests for summary/outgoing improved in subsequent patches, to reduce amount of diffs in each patches. This patch adds new revisions below: - revision #2 adds new largefiles, but they contain as same data as one already existing this causes that multiple standins refer the same data entity - revision #3, #4 and #5 change the already existing largefile this causes that multiple data entities are outgoing for the standin. #5 can be used to check de-duplication of "(hash, filename)" pair.

context: generate filtered manifest efficiently for exact matchers When the matcher is exact, there's no reason to iterate over the entire manifest. It's much more efficient to iterate over the list of files instead. For a repository with approximately 300,000 files, this speeds up hg log -l10 --patch --follow for a frequently modified file from 16.5 seconds to 10.5 seconds.

manifestdict: add a new method to intersect with a set of files This is meant to be used when the set of files is known in advance, e.g. with a match object with no patterns.

log: use an exact matcher for --patch --follow The arguments to log --patch --follow are expected to be exact paths. This will be used to make manifest filtering for these cases more efficient in upcoming patches.

merge with stable

log: make --patch --follow work inside a subdirectory Previously, the 'patch' code for hg log --patch --follow would try to resolve patterns relative to the repository root rather than the current working directory. Fix that by using match.files instead of pats, as done elsewhere nearby.

mergetools: add --nofork option to gvimdiff.diffargs for extdiff Without --nofork, temporary files are removed immediately before gvimdiff starts. "-d -g -O" are put just for consistency with gvimdiff.args.

contrib/vagrant: use Vagrant for running tests on virtual machine $ cd contrib/vagrant $ vagrant up $ vagrant ssh -c ./run-tests.sh Repository is shared at /hgshared in guest machine.

merge with stable

log: allow revset for --follow to be lazily evaluated It is unclear to me why evaluation was forced. For a repository with over 700,000 commits, 'hg log -f' drops from 1.2 seconds to 0.2 seconds.

parsers: remove unused getintat function Warning detected by clang.

revset: maintain ordering when subtracting from a baseset (issue4289)

cmdutil: separate building commit text from 'commitforceeditor' This separation makes it easier to extend/hook building commit text from the specified context. This patch uses 'committext' instead of 'edittext' for names of newly added variable and function, because the former is more purpose specific than the latter, even though 'edittext' in 'buildcommittext' is left as it is to reduce amount of diff.

convert: detect removal of ".gitmodules" at git source revisions correctly Before this patch, all operations applied on ".gitmodules" at git source revisions are treated as modification, even if they are actually removal of it. If removal of ".gitmodules" is treated as modification unexpectedly, "hg convert" is aborted by the exception raised in "retrievegitmodules()" for ".gitmodules" at the git source revision removing it, because that revision doesn't have any information of ".gitmodules". This patch detects removal of ".gitmodules" at git source revisions correctly. If ".gitmodules" is removed at the git source revision, this patch records "hex(nullid)" as the contents hash value for ".hgsub" and ".hgsubstate" at the destination revision. This patch makes "getfile()" raise IOError also for ".hgstatus" and ".hgsubstate" if the contents hash value is "hex(nullid)", and this tells removal of ".hgstatus" and ".hgsubstate" at the destination revision to "localrepository.commitctx()" correctly. For files other than ".hgstatus" and ".hgsubstate", checking the contents hash value in "getfile()" may be redundant, because "catfile()" for them also does so. But this patch chooses writing it only once at the beginning of "getfile()", to avoid writing same code twice both for ".hgsub" and ".hgsubstate" separately.

templates: escape NUL bytes in jsonescape (issue4303) It's currently possible for various fields to contain NUL bytes, which are disallowed in JSON.

localrepo: document localrepo.hook()

filemerge: use 'util.ellipsis' to trim custom conflict markers correctly Before this patch, filemerge slices byte sequence directly to trim conflict markers, but this may cause: - splitting at intermediate multi-byte sequence - incorrect calculation of column width (length of byte sequence is different from columns in display in many cases) This patch uses 'util.ellipsis' to trim custom conflict markers correctly, even if multi-byte characters are used in them.

filemerge: use only the first line of the generated conflict marker for safety Before this patch, with careless configuration (missing '|firstline' filtering for '{desc}' keyword, for example), '[ui] mergemarkertemplate' can make conflict markers multiple lines. For ordinary users, advantage of allowing '[ui] mergemarkertemplate' to generate multiple lines for customizing seems to be less than advantage of disallowing it for safety. This patch uses only the first line of the conflict marker generated from '[ui] mergemarkertemplate' configuration for safety.