hghave: cache the result of gethgversion hghave --test-features calls it 90 times, each one calling hg --version which takes a tenth of a second on my workstation, adding up to about 10s win on test-hghave.t. Fixes https://bugs.debian.org/939756 Differential Revision: https://phab.mercurial-scm.org/D8092

clean: delete obsolete unlinking of .hg/graftstate The responsibility for clearing it is now in `cmdutil.clearunfinished()`, so we shouldn't have to unlink it in `hg.clean()`. Differential Revision: https://phab.mercurial-scm.org/D7992

copies: avoid filtering by short-circuit dirstate-only copies earlier The call to `y.ancestor(x)` triggered repo filtering, which we'd like to avoid in the simple `hg status --copies` case. Differential Revision: https://phab.mercurial-scm.org/D8071

tests: add test showing that repo filter is calculated for `hg st --copies` Differential Revision: https://phab.mercurial-scm.org/D8070

lfs: enable workers by default With the stall issue seemingly fixed, there's no reason not to use workers. The setting is left for now to keep the test output deterministic, and in case other issues come up. If none do, this can be converted to a developer setting for usage with the tests. Differential Revision: https://phab.mercurial-scm.org/D7963

lfs: fix the stall and corruption issue when concurrently uploading blobs We've avoided the issue up to this point by gating worker usage with an experimental config. See 10e62d5efa73, and the thread linked there for some of the initial diagnosis, but essentially some data was being read from the blob before an error occurred and `keepalive` retried, but didn't rewind the file pointer. So the leading data was lost from the blob on the server, and the connection stalled, trying to send more data than available. In trying to recreate this, I was unable to do so uploading from Windows to CentOS 7. But it reproduced every time going from CentOS 7 to another CentOS 7 over https. I found recent fixes in the FaceBook repo to address this[1][2]. The commit message for the first is: The KeepAlive HTTP implementation is bugged in it's retry logic, it supports reading from a file pointer, but doesn't support rewinding of the seek cursor when it performs a retry. So it can happen that an upload fails for whatever reason and will then 'hang' on the retry event. The sequence of events that get triggered are: - Upload file A, goes OK. Keep-Alive caches connection. - Upload file B, fails due to (for example) failing Keep-Alive, but LFS file pointer has been consumed for the upload and fd has been closed. - Retry for file B starts, sets the Content-Length properly to the expected file size, but since file pointer has been consumed no data will be uploaded, causing the server to wait for the uploaded data until either client or server reaches a timeout, making it seem as our mercurial process hangs. This is just a stop-gap measure to prevent this behavior from blocking Mercurial (LFS has retry logic). A proper solutions need to be build on top of this stop-gap measure: for upload from file pointers, we should support fseek() on the interface. Since we expect to consume the whole file always anyways, this should be safe. This way we can seek back to the beginning on a retry. I ported those two patches, and it works. But I see that `url._sendfile()` does a rewind on `httpsendfile` objects[3], so maybe it's better to keep this all in one place and avoid a second seek. We may still want the first FaceBook patch as extra protection for this problem in general. The other two uses of `httpsendfile` are in the wire protocol to upload bundles, and to upload largefiles. Neither of these appear to use a worker, and I'm not sure why workers seem to trigger this, or if this could have happened without a worker. Since `httpsendfile` already has a `close()` method, that is dropped. That class also explicitly says there's no `__len__` attribute, so that is removed too. The override for `read()` is necessary to avoid the progressbar usage per file. [1] https://github.com/facebookexperimental/eden/commit/c350d6536d90c044c837abdd3675185644481469 [2] https://github.com/facebookexperimental/eden/commit/77f0d3fd0415e81b63e317e457af9c55c46103ee [3] https://www.mercurial-scm.org/repo/hg/file/5.2.2/mercurial/url.py#l176 Differential Revision: https://phab.mercurial-scm.org/D7962

lfs: add a method to the local blobstore to convert OIDs to file paths This is less ugly than passing an open callback to the `httpsendfile` constuctor. Differential Revision: https://phab.mercurial-scm.org/D7961

merge: introduce a revert_to() for that use-case In the same vein as the previous patch. Differential Revision: https://phab.mercurial-scm.org/D7901

merge: introduce a clean_update() for that use-case I find it hard to understand what value to pass for all the arguments to `merge.update()`. I would like to introduce functions that are more specific to each use-case. We already have `graft()`. This patch introduces a `clean_update()` and uses it in some places to show that it works. Differential Revision: https://phab.mercurial-scm.org/D7902

manifest: fix _very_ subtle bug with exact matchers passed to walk() Prior to this fix, manifestdict.walk() with an exact matcher would blindly list the files in the matcher, even if they weren't in the manifest. This was exposed by my next patch where I rewrite filesnotin() to use walk() instead of matches(). Differential Revision: https://phab.mercurial-scm.org/D8081

rust-utils: add `Escaped` trait This will be used as a general interface for displaying things to the user. The upcoming `IncludeMatcher` will use it to store its patterns in a user-displayable string. Differential Revision: https://phab.mercurial-scm.org/D7870

rust-dirs-multiset: add `DirsChildrenMultiset` In a future patch, this structure will be needed to store information needed by the (also upcoming) `IgnoreMatcher`. Differential Revision: https://phab.mercurial-scm.org/D7869

rust-hg-path: add useful methods to `HgPath` This changeset introduces the use of the `pretty_assertions` crate for easier to read test output. Differential Revision: https://phab.mercurial-scm.org/D7867

rust-pathauditor: add Rust implementation of the `pathauditor` It does not offer the same flexibility as the Python implementation, but should check incoming paths just as well. Differential Revision: https://phab.mercurial-scm.org/D7866

py3: catch AttributeError too with ImportError Looks like py3 raises AttributeError instead of ImportError. This is caught on windows. Differential Revision: https://phab.mercurial-scm.org/D7965

context: use manifest.walk() instead of manifest.match() to get file list The former doesn't create a whole extra manifest in order to produce the matching file list, which is all we actually cared about here. Sigh. Differential Revision: https://phab.mercurial-scm.org/D8080

manifest: remove `.new()` from the interface Nothing used it. Differential Revision: https://phab.mercurial-scm.org/D8079

chg: force-set LC_CTYPE on server start to actual value from the environment Python 3.7+ will "coerce" the LC_CTYPE variable in many instances, and this can cause issues with chg being able to start up. D7550 attempted to fix this, but a combination of a misreading of the way that python3.7 does the coercion and an untested state (LC_CTYPE being set to an invalid value) meant that this was still not quite working. This change will cause differences between chg and hg: hg will have the LC_CTYPE environment variable coerced, while chg will not. This is unlikely to cause any detectable behavior differences in what Mercurial itself outputs, but it does have two known effects: - When using hg, the coerced LC_CTYPE will be passed to subprocesses, even non-python ones. Using chg will remove the coercion, and this will not happen. This is arguably more correct behavior on chg's part. - On macOS, if you set your region to Brazil but your language to English, this isn't representable in locale strings, so macOS sets LC_CTYPE=UTF-8. If this value is passed along when ssh'ing to a non-macOS machine, some functions (such as locale.setlocale()) may raise an exception due to an unsupported locale setting. This is most easily encountered when doing an interactive commit/split/etc. when using ui.interface=curses. Differential Revision: https://phab.mercurial-scm.org/D8039

perf: fix list formatting in perfindex documentation Differential Revision: https://phab.mercurial-scm.org/D8067

test: simplify test-amend.t to avoid race condition Insted on relying on sleep, we could simply have the editor do the file change. This remove the reliance on "sleep" and avoid test failing on heavy load machine. To test this, I reverted the code change in 5558e3437872 and the test started failing again. Differential Revision: https://phab.mercurial-scm.org/D8065

test: document test-copy-move-merge.t Differential Revision: https://phab.mercurial-scm.org/D8077

manifest: remove optional default= argument on flags(path) It had only one caller inside manifest.py, and treemanifest was actually incorrectly implemented. treemanifest is still missing the fastdelta() method from the interface (and so doesn't yet conform), but this is at least progress. Differential Revision: https://phab.mercurial-scm.org/D8069

resourceutil: blacken

merge with stable

rebase: abort if the user tries to rebase the working copy I think it's more correct to treat `hg rebase -r 'wdir()' -d foo` as `hg co -m foo`, but I'm instead making it error out. That's partly because it's probably what the user wanted (in the case I heard from a user, they had done `hg rebase -s f` where `f` resolved to `wdir()`) and partly because I don't want to think about more complicated cases where the user specifies the working copy together with other commits. Differential Revision: https://phab.mercurial-scm.org/D8057

tests: add tests for rebasing wdir() revision Differential Revision: https://phab.mercurial-scm.org/D8056

merge: when rename was made on both sides, use ancestor as merge base When both sides of a merge have renamed a file to the same place, we would treat that as a "both created" action in merge.py. That means that we'd use an empty diffbase. It seems better to use the copy source as diffbase. That can be done by simply dropping code that prevented us from doing that. I think I did it that way in 57203e0210f8 (copies: calculate mergecopies() based on pathcopies(), 2019-04-11) only to preserve the existing behavior. I also suspect it was just an accident that it behaved that way before that commit. Note that until fa9ad1da2e77 (merge: start using the per-side copy dicts, 2020-01-23), it was non-deterministic (depending on iteration order of the `allsources` set in `copies._fullcopytracing()`) which source was used in the affected test case in test-rename-merge1.t. We could easily have fixed that by sorting them, but now we can instead detect the case (the TODO added in the previous patch). Differential Revision: https://phab.mercurial-scm.org/D7974

absorb: graduate -i flag from experimental The interactive mode seems to work well. I have previously thought that `-i` should be what `-e` does, but the current behavior matches what other `-i` flags do (select a subset of the hunks), so I think that is what we want. Differential Revision: https://phab.mercurial-scm.org/D8055

rust-cpython: remove PySharedRefCell and its companion structs Also updates py_shared_iterator!() documentation accordingly.

rust-cpython: switch to upstreamed version of PySharedRefCell Our PyLeaked is identical to cpython::UnsafePyLeaked. I've renamed it because it provides mostly unsafe functions.

rust-cpython: rename inner_shared() to inner() The "shared" accessor will be automatically generated, and will have the same name as the data itself.

rust-cpython: use PyList.insert() instead of .insert_item() Silences the deprecated warning. https://github.com/dgrunwald/rust-cpython/commit/e8cbe864841714c5555db8c90e057bd11e360c7f

rust-cpython: bump cpython to 0.4 to switch to upstreamed PySharedRef

rust: update dependencies For no particular reason, but just because I'll bump the rust-cpython version.

contrib: a small script to nudge lingering diff After a discussion on IRC with various reviewers. It seems like a good idea to have some automatic cleanup of old, inactive diffs. Here is a small script able to do so. I am preparing to unleash it on our phabricator instance.

packaging: add support for PyOxidizer I've successfully built Mercurial on the development tip of PyOxidizer on Linux and Windows. It mostly "just works" on Linux. Windows is a bit more finicky. In-memory resource files are probably not all working correctly due to bugs in PyOxidizer's naming of modules. PyOxidizer now now supports installing files next to the produced binary. (We do this for templates in the added file.) So a workaround should be available. Also, since the last time I submitted support for PyOxidizer, PyOxidizer gained the ability to auto-generate Rust projects to build executables. So we don't need to worry about vendoring any Rust code to initially support PyOxidizer. However, at some point we will likely want to write our own command line driver that embeds a Python interpreter via PyOxidizer so we can run Rust code outside the confines of a Python interpreter. But that will be a follow-up. I would also like to add packaging.py CLI commands to build PyOxidizer distributions. This can come later, if ever. PyOxidizer's new "targets" feature makes it really easy to define packaging tasks in its Starlark configuration file. While not much is implemented yet, eventually we should be able to produce MSIs, etc using a `pyoxidizer build` one-liner. We'll get there... Differential Revision: https://phab.mercurial-scm.org/D7450

mergestate: add accessors for local and other nodeid, not just contexts The mergestate can contain invalid nodeids. In that case, `mergestate.localctx` or `mergestate.otherctx` will fail. This patch provides a way of accessing the nodeid without failing in such cases. Differential Revision: https://phab.mercurial-scm.org/D8040

rebase: define base in only place in defineparents() Just a little refactoring to prepare for the next patch. Differential Revision: https://phab.mercurial-scm.org/D7906

tests: use full `uncommit` command name in tests I'm about to add a `hg uncopy`, so the `hg unc` we used for `hg uncommit` would become ambiguous. Differential Revision: https://phab.mercurial-scm.org/D8028

graft: default `base` argument to common case of `ctx.p1()` I also updated the callers that wanted that, partly to simplify and partly to show that it works. Differential Revision: https://phab.mercurial-scm.org/D8027

graft: let caller pass in overlayworkingctx to merge.graft() Passing in a different `wctx` than `repo[None]` is useful because it allows the caller to decide to not touch the working directory. Differential Revision: https://phab.mercurial-scm.org/D8026

copies: fix crash when copy source is not in graft base Differential Revision: https://phab.mercurial-scm.org/D8046

tests: add test showing crash when shelving ghosted rename target When you `hg rename` a file and then delete the rename target, `hg shelve` will give you a traceback. Note that the shelve succeeds and the shelve is correct, it's just the update to the parent that fails (i.e. to the parent of the commit that was created for the shelve). This can be squashed into the next commit if the reviewer prefers. Differential Revision: https://phab.mercurial-scm.org/D8045

rust-cpython: mark all PyLeaked methods as unsafe Unfortunately, these methods can be abused to obtain the inner 'static reference. The simplest (pseudo-code) example is: let leaked: PyLeaked<&'static _> = shared.leak_immutable(); let static_ref: &'static _ = &*leaked.try_borrow(py)?; // PyLeakedRef::deref() tries to bound the lifetime to itself, but // the underlying data is a &'static reference, so the returned // reference can be &'static. This problem can be easily fixed by coercing the lifetime, but there are many other ways to achieve that, and there wouldn't be a generic solution: let leaked: PyLeaked<&'static [_]> = shared.leak_immutable(); let leaked_iter: PyLeaked<slice::Iter<'static, _>> = unsafe { leaked.map(|v| v.iter()) }; let static_slice: &'static [_] = leaked_iter.try_borrow(py)?.as_slice(); So basically I failed to design the safe borrowing interface. Maybe we'll instead have to add much more restricted interface on top of the unsafe PyLeaked methods? For instance, Iterator::next() could be implemented if its Item type is not &'a (where 'a may be cheated.) Anyway, this seems not an easy issue, so it's probably better to leave the current interface as unsafe, and get broader comments while upstreaming this feature.

rust-cpython: make PySharedRef::try_borrow_mut() return BorrowMutError As I said, it shouldn't be an error of Python layer, but is something like a coding error. Returning BorrowMutError makes more sense. There's a weird hack to propagate the borrow-by-leaked state to RefCell to obtain BorrowMutError. If we don't like it, maybe we can add our own BorrowMutError.

rust-cpython: inline PySharedState::leak_immutable() and PyLeaked::new() For the same reason as the previous patch. The unsafe stuff can be better documented if these functions are inlined.

rust-cpython: inline PySharedState::try_borrow_mut() Since the core borrowing/leaking logic has been moved to PySharedRef* and PyLeaked*, it doesn't make sense that PySharedState had a function named "try_borrow_mut". Let's turn it into a pure data struct.

rust-cpython: add panicking version of borrow_mut() and use it The original borrow_mut() is renamed to try_borrow_mut(). Since leak_immutable() no longer incref the borrow count, the caller should know if the underlying value is borrowed or not. No Python world is involved. That's why we can simply use the panicking borrow_mut().

setup: don't skip the search for global hg.exe if there is no local instance The point of trying not to blindly execute `hg` on Windows is that the local hg.exe would be given precedence, and if py3 isn't on PATH, it errors out with a modal dialog. But that's not a problem if there is no local executable that could be run. The problem that I recently ran into was I upgraded the repo format to use zstd. But doing a `make clean` deletes all of the supporting libraries, causing the next run to abort with a message about not understanding the `revlog-compression-zstd` requirement. By getting rid of the local executable in the previous commit when cleaning, we avoid leaving a broken executable around, and avoid the py3 PATH problem too. There is still a small hole in that `hg.exe` needs to be deleted before switching between py2/py3/PyOxidizer builds, because the zstd module won't load. But that seems like good hygiene anyway. Differential Revision: https://phab.mercurial-scm.org/D8038

make: also delete hg.exe when cleaning This will be needed for the next patch, which has more details. It has to come before the call into setup.py because even `python setup.py clean` calls hg to generate the version file. Differential Revision: https://phab.mercurial-scm.org/D8037

merge: start using the per-side copy dicts The point of this patch is mostly to clarify `manifestmerge()`. I find it much easier to reason about now. Differential Revision: https://phab.mercurial-scm.org/D7990

copies: define a type to return from mergecopies() We'll soon return two instances of many of the dicts from `copies.mergecopies()`. That will mean that we need to return 9 different dicts, which is clearly not manageable. This patch instead encapsulates the 4 dicts we'll duplicate in a new type. For now, we still just return one instance of it (plus the separate `diverge` dict). Differential Revision: https://phab.mercurial-scm.org/D7989

merge: move initialization of copy dicts to one place Differential Revision: https://phab.mercurial-scm.org/D7988

copies: print debug information about copies per side/branch Differential Revision: https://phab.mercurial-scm.org/D7987

copies: make mergecopies() distinguish between copies on each side I find it confusing that most of the dicts returned from `mergecopies()` have entries specific to one branch of the merge, but they're still combined into dict. For example, you can't tell if `copy = {"bar": "foo"}` means that "foo" was copied to "bar" on the first branch or the second. It also feels like there are bugs lurking here because we may mistake which side the copy happened on. However, for most of the dicts, it's not possible that there is disagreement. For example, `renamedelete` keeps track of renames that happened on one side of the merge where the other side deleted the file. There can't be a disagreement there (because we record that in the `diverge` dict instead). For regular copies/renames, there can be a disagreement. Let's say file "foo" was copied to "bar" on one branch and file "baz" was copied to "bar" on the other. Beacause we only return one `copy` dict, we end up replacing the `{"bar": "foo"}` entry by `{"bar": "baz"}`. The merge code (`manifestmerge()`) will then decide that that means "both renamed from 'baz'". We should probably treat it as a conflict instead. The next few patches will make `mergecopies()` return two instances of most of the returned copies. That will lead to a bit more code (~40 lines), but I think it makes both `copies.mergecopies()` and `merge.manifestmerge()` clearer. Differential Revision: https://phab.mercurial-scm.org/D7986

pathutil: mark parent directories as audited as we go Before 0b7ce0b16d8a (pathauditor: change parts verification order to be root first, 2016-02-11), we used to validate child directories before parents. It was then important to only mark the child audited only after we had audited its parent (ancestors). I'm pretty sure we don't need to do that any more, now that we audit parents before children. Differential Revision: https://phab.mercurial-scm.org/D8002

cmdutil: change check_incompatible_arguments() *arg to single iterable This makes it clearer on the call-sites that the first argument is special. Thanks to Yuya for the suggestion. Differential Revision: https://phab.mercurial-scm.org/D8018

rust: remove an unnecessary set of parentheses My build complained about this. I guess it started after I upgraded rustc. Differential Revision: https://phab.mercurial-scm.org/D8020

profiling: flush stdout before writing profile to stderr On py3, stdout and stderr appear to be buffered and this causes my command's output to be intermixed with the profiling output. Differential Revision: https://phab.mercurial-scm.org/D8024

rust: re-format with nightly rustfmt This fixes test-check-rust-format.t. Differential Revision: https://phab.mercurial-scm.org/D8025

tests: stablize test-rename-merge1.t on Windows This goes with d7622fdec3b5. Differential Revision: https://phab.mercurial-scm.org/D8036

rust-cpython: make sure PySharedRef::borrow_mut() never panics Since it returns a Result, it shouldn't panic depending on where the borrowing fails. PySharedRef::borrow_mut() will be renamed to try_borrow_mut() by the next patch.

rust-cpython: remove useless wrappers from PyLeaked, just move by map() This series prepares for migrating to the upstreamed version of PySharedRef. I found this last batch wasn't queued while rewriting the callers. While Option<T> was historically needed, it shouldn't be required anymore. I wasn't aware that each filed can be just moved.

rust-node: avoid meaningless read at the end of odd prefix This should be heavily factored out by the CPU branch predictor anyway. Differential Revision: https://phab.mercurial-scm.org/D8019

rust-nodemap: generic NodeTreeVisitor This iterator will help avoid code duplication when we'll implement `insert()`, in which we will need to traverse the node tree, and to remember the visited blocks. The structured iterator item will allow different usages from `lookup()` and the upcoming `insert()`. Differential Revision: https://phab.mercurial-scm.org/D7794

rust-nodemap: mutable NodeTree data structure Thanks to the previously indexing abstraction, the only difference in the lookup algorithm is that we don't need the special case for an empty NodeTree any more. We've considered making the mutable root an `Option<Block>`, but that leads to unpleasant checks and `unwrap()` unless we abstract it as typestate patterns (`NodeTree<Immutable>` and `NodeTree<Mutated>`) which seem exaggerated in that case. The initial copy of the root block is a very minor performance penalty, given that it typically occurs just once per transaction. Differential Revision: https://phab.mercurial-scm.org/D7793

rust-nodemap: abstracting the indexing In the forthcoming mutable implementation, we'll have to visit node trees that are more complex than a single slice, although the algorithm will still be expressed in simple indexing terms. We still refrain using `#[inline]` indications as being premature optimizations, but we strongly hope the compiler will indeed inline most of the glue. Differential Revision: https://phab.mercurial-scm.org/D7792

rust-nodemap: NodeMap trait with simplest implementation We're defining here only a small part of the immutable methods it will have at the end. This is so we can focus in the following changesets on the needed abstractions for a mutable append-only serializable version. The first implementor exposes the actual lookup algorithm in its simplest form. It will have to be expanded to account for the missing methods, and the special cases related to NULL_NODE. Differential Revision: https://phab.mercurial-scm.org/D7791

rust-node: handling binary Node prefix Parallel to the inner signatures of the nodetree functions in revlog.c, we'll have to handle prefixes of `Node` in binary form. Another motivation is that it allows to convert from full Node references to `NodePrefixRef` without copy. This is expected to be by far the most common case in practice. There's a slight complication due to the fact that we'll be sometimes interested in prefixes with an odd number of hexadecimal digits, which translates in binary form by a last byte in which only the highest weight 4 bits are considered. This is totally transparent for callers and could be revised once we have proper means to measure performance. The C implementation does the same, passing the length in nybbles as function arguments. Because Rust byte slices already have a length, we carry the even/odd informaton as a boolean, to avoid introducing logical redundancies and the related potential inconsistency bugs. There are a few candidates for inlining here, but we refrain from such premature optimizations, letting the compiler decide. Differential Revision: https://phab.mercurial-scm.org/D7790

rust-revlog: a trait for the revlog index As explained in the doc comment, this is the minimum needed for our immediate concern, which is to implement a nodemap in Rust. The trait will be later implemented in `hg-cpython` by the index Python object implemented in C, thanks to exposition of the corresponding functions as a capsule. The `None` return cases in `node()` match what the `index_node()` C function does. Differential Revision: https://phab.mercurial-scm.org/D7789

pathauditor: drop a redundant call to bytes.lower() `_lowerclean(s)` calls `s.lower()`, so we don't need to do that before calling it. Differential Revision: https://phab.mercurial-scm.org/D8001

merge: replace a repo.lookup('.') by more typical repo['.'].node() The `repo.lookup('.')` form comes from b3311e26f94f (merge: fix --preview to show all nodes that will be merged (issue2043)., 2010-02-15). I don't know why that commit changed from `repo['.']`, but I don't think there's any reason to do that. Note that performance should not be a reason (anymore?), because repo.lookup() is implemented by first creating a context object. Differential Revision: https://phab.mercurial-scm.org/D7998

merge: drop now-unused "abort" argument from hg.merge() Differential Revision: https://phab.mercurial-scm.org/D7997

merge: don't auto-pick destination with `hg merge 'wdir()'` If the user doesn't specify a commit to merge with, we'll have `node==None` in `commands.merge()`. We'll then try to find a good commit to merge with. However, if the user, for some strange reason, runs `hg merge 'wdir()'`, we'll also have `node==None` and we'll do that same. That's clearly not the intent, so let's not do that. It turns out we'd instead crash on that command after this patch, so I added special handling of it too. Differential Revision: https://phab.mercurial-scm.org/D7996

merge: call hg.abortmerge() directly and return early It's seem really weird to go through a lot of unrelated code before we call `hg.merge(..., abort=True)` when we can just call `hg.abortmerge()` and return early. Differential Revision: https://phab.mercurial-scm.org/D7995

merge: check that there are no conflicts after --abort Same idea as in abcc82bf0717 (clean: check that there are no conflicts after, 2020-01-24). We should reuse more code here, but that will come later. Differential Revision: https://phab.mercurial-scm.org/D7994

merge: use check_incompatible_arguments() for --abort Differential Revision: https://phab.mercurial-scm.org/D7993

rebase: move some variables after an error cases where they're not needed Differential Revision: https://phab.mercurial-scm.org/D7905

rebase: clarify a little by calculating a set in Python instead of in revset By calculating the set in Python, we can give it a name, which helps readability. Differential Revision: https://phab.mercurial-scm.org/D7904

merge: avoid a negation in the definition of updatedirstate We only use `partial` in one place: the definition of `updatedirstate`. Let's simplify that a little. Differential Revision: https://phab.mercurial-scm.org/D7900

merge: move definition of `partial` closer to where it's used Differential Revision: https://phab.mercurial-scm.org/D7983

copies: extract function for finding directory renames The directory rename code is logically quite isolated, so it makes sense to make it physically isolated as well. Differential Revision: https://phab.mercurial-scm.org/D7977

copies: avoid calculating debug-only stuff without --debug `renamedeleteset` and `divergeset` is only used with `repo.ui.debugflag`, so let's avoid calculating them otherwise. While at it, I also added a `del renamedeleteset` for consistency. Differential Revision: https://phab.mercurial-scm.org/D7976

copies: move early return in mergecopies() earlier It wasn't obvious that the early return happened only when there are no copies. That is the case, however, because if `fullcopy` is empty, then so is `copies1` and `copies2`, and then so is `inversecopies1` and `inversecopies2`, and then so is `allsources`, and then so is `copy`, `diverge` and `renamedelete`. By moving the early return earlier, we also avoid calculating the set of added files from the base to each side. Differential Revision: https://phab.mercurial-scm.org/D7975

tests: test merge of renames of different sources to same target This is a really obscure scenario, but let's still have it tested so we know when it changes. Differential Revision: https://phab.mercurial-scm.org/D7985

clean: check that there are no conflicts after As noted by Pulkit, there should never be any conflicts after doing a clean update, so `hg.clean()` should never return `True`. Let's check that assertion instead to clarify the code. The callers will now get a `None` instead of a `False` returned, but that should be fine (both result in a 0 exit status). Differential Revision: https://phab.mercurial-scm.org/D7984

progress: delete deprecated ui.progress() Differential Revision: https://phab.mercurial-scm.org/D7991

rust-dependencies: update rayon This is just to make sure we use the latest version and also makes it easier to peruse the docs. Differential Revision: https://phab.mercurial-scm.org/D7926

merge with stable

merge: define updatedirstate a little earlier and reuse it Differential Revision: https://phab.mercurial-scm.org/D7899

merge: don't call update hook when using in-memory context I'm pretty sure many hook implementors will assume that they can inspect the working copy and/or dirstate parents when the hook is called, so I don't think we should call the hook when using an in-memory context. The new behavior matches that of the preupdate hook. Differential Revision: https://phab.mercurial-scm.org/D7898

merge with stable

packaging: add configparser to inno requirements file This dependency is missing and pip complains about it in strict hashing mode. How this was missed, I have no clue. Differential Revision: https://phab.mercurial-scm.org/D7973

python-zstandard: blacken at 80 characters I made this change upstream and it will make it into the next release of python-zstandard. I figured I'd send it Mercurial's way because it will allow us to drop this directory from the black exclusion list. # skip-blame blackening Differential Revision: https://phab.mercurial-scm.org/D7937

tests: move non-collapse test out of test-rebase-collapse The test case was added in 76630fbbf4fa (test-rebase-collapse: Add test for rebase regression introduced in 12309c09d19a, 2012-01-23). I think `hg rebase --collapse` was involved in either the regression or in the fix that caused the regression, but the test that was added doesn't use `--collapse`, so it doesn't seem to belong in test-rebase-collapse.t. The test case is about copies, so I moved it to test-rebase-rename.t. Differential Revision: https://phab.mercurial-scm.org/D7968

debugcommands: add Python implementation to debuginstall This seems like a useful detail to print. Differential Revision: https://phab.mercurial-scm.org/D7979

run-tests: remove --py3-warnings This Python 2 only mode was to help Python 2 alert when doing things not supported on Python 3. Now that we have test coverage with Python 3, I don't think we need it. Differential Revision: https://phab.mercurial-scm.org/D7978

rust-node: binary Node ID and conversion utilities The choice of type makes sure that a `Node` has the exact wanted size. We'll use a different type for prefixes. Added dependency: hexadecimal conversion relies on the `hex` crate. The fact that sooner or later Mercurial is going to need to change its hash sizes has been taken strongly in consideration: - the hash length is a constant, but that is not directly exposed to callers. Changing the value of that constant is the only thing to do to change the hash length (even in unit tests) - the code could be adapted to support several sizes of hashes, if that turned out to be useful. To that effect, only the size of a given `Node` is exposed in the public API. - callers not involved in initial computation, I/O and FFI are able to operate without a priori assumptions on the hash size. The traits `FromHex` and `ToHex` have not been directly implemented, so that the doc-comments explaining these restrictions would stay really visible in `cargo doc` Differential Revision: https://phab.mercurial-scm.org/D7788

rust-nodemap: building blocks for nodetree structures This is similar to `nodetreenode` in `revlog.c`. We give it a higher level feeling for ease of handling in Rust context and provide tools for tests and debugging. The encoding choice is dictated by our ultimate goal in this series, that is to make an append-only persistent version of `nodetree`: the 0th Block must be adressed from other Blocks. Differential Revision: https://phab.mercurial-scm.org/D7787

lfs: move the initialization of the upload request into the try block This (almost) guarantees that the file is closed in the case of an exception. The one hole is if the `seek(SEEK_END)`/`tell()`/`seek(0)` sequence fails. But that's going to go away when subclassing `httpconnection.httpsendfile` to fix the worker problem, so I'm not going to worry too much. (And that class appears to have the same problem.) Differential Revision: https://phab.mercurial-scm.org/D7959

lfs: drop an unnecessary r'' prefix No longer necessary since the source transformer was removed. # skip-blame for changing string prefixes Differential Revision: https://phab.mercurial-scm.org/D7958

lfs: explicitly close the file handle for the blob being uploaded The previous code relied on reading the blob fully to close it. The obvious problem is if an error occurs before that point. But there is also a problem when using workers where the data may need to be re-read, which can't happen once it is closed. This eliminates the surprising behavior before attempting to fix the worker problem. Differential Revision: https://phab.mercurial-scm.org/D7957

lfs: drop the unused progressbar code in the `filewithprogress` class This has been unused since f98fac24b757, which added worker based transfers for concurrency, shifting the progressbar maintenance to the single thread waiting on the worker to complete. Since the name no longer fits, rename the class. Differential Revision: https://phab.mercurial-scm.org/D7956

rust-filepatterns: remove bridge code for filepatterns-related functions These functions will be used internally by `hg-core` without needed to be exposed to Python. Differential Revision: https://phab.mercurial-scm.org/D7868

rust-utils: add Rust implementation of Python's "os.path.splitdrive" I also wrote the NT version although I didn't mean to at first, so I thought I would keep it, so that any further effort to get the Rust code working on Windows is a little easier. Differential Revision: https://phab.mercurial-scm.org/D7864

setup: link osutil.so to libsocket on Solaris/illumos (issue6299)

discovery: avoid wrongly saying there are nothing to pull We can get in a situation where a revision passed through `hg pull --rev REV` are available on the server, but not a descendant of the advertised server heads. For example the server could lying be during heads advertisement, to hide some pull request. Or obsolete/hidden content could be explicitly pulled. So in this case the lookup associated to `REV` returned successfully, but the normal discovery will find all advertised heads already known locally. This flip a special boolean `anyinc` that will prevent any fetch attempt, preventing `REV` to be pulled over. We add three line of code to detect this case and make sure a pull actually happens. My main target is to make some third party extensions happy (I expect the associated test to move upstream with the extension). However this fix already make some of the `infinitepush` test happier.

Added signature for changeset 8fca7e8449a8

Added tag 5.3.2 for changeset 8fca7e8449a8

histedit: add missing b prefix to a string If i18n is disabled (such as via HGPLAIN=1), `_()` doesn't convert from str to bytes, so this raises a TypeError on py3. Differential Revision: https://phab.mercurial-scm.org/D8354

py3: require values in changelog extras to be bytes I don't know what happened here because b436059c1cca (py3: use pycompat.bytestr() on extra values because it can be int, 2019-02-05) came about b44a47214122 (py3: use string for "close" value in commit extras, 2018-02-11). Whatever happened, we shouldn't need to convert the values to bytes now. It's better to not convert because that might cover up bugs where someone sets a unicode value in the extras and that works until the unicode value happens to contain non-ascii (at which point it will fail because `bytestr()` expects its argument to be ascii if it's unicode). Differential Revision: https://phab.mercurial-scm.org/D8332

py3: make setup.py's hgcommand() consistently return bytes Before this patch, it returned unicode when the command failed. That made e.g. `make local PYTHON=python3` fail on an obsolete commit. Differential Revision: https://phab.mercurial-scm.org/D8331

darwin: use vim, not vi, to avoid data-loss inducing posix behavior Apple's version of vim, available at opensource.apple.com/release/macos-1015.html (for Catalina, but this behavior has been there for a while) has several tweaks from the version of vim from vim.org. Most of these tweaks appear to be for "Unix2003" compatibility. One of the tweaks is that if any ex command raises an error, the entire process will (when you exit, possibly minutes/hours later) also exit non-zero. Ex commands are things like `:foo`. Luckily, they only enabled this if vim was executed (via a symlink or copying the binary) as `vi` or `ex`. If you start it as `vim`, it doesn't have this behavior, so let's do that. To see this in action, run the following two commands on macOS: ``` $ vi -c ':unknown' -c ':qa' ; echo $? 1 $ vim -c ':unknown' -c ':qa' ; echo $? 0 ``` We don't want to start ignoring non-zero return types from the editor because that will mean you can't use `:cquit` to intentionally exit 1 (which, shows up as 2 if you combine an ex command error and a cquit, but only a 1 if you just use cquit, so we can't differentiate between the two statuses). Since we can't differentiate, we have to assume that all non-zero exit codes are intentional and an indication of the user's desire to not continue with whatever we're doing. If this was a complicated `hg split` or `hg histedit`, this is especially disastrous :( Differential Revision: https://phab.mercurial-scm.org/D8321

cext: move variable declaration to the top of the block for C89 support Not sure if we still care about C89 in general, but MSVC requires this style too. Differential Revision: https://phab.mercurial-scm.org/D8304

byteify-string: resolve symlink before byteifying Otherwise the script turns symlinks into regular files.

cext-index: propagate inline_scan error in `index_deref` Before this change, revlog index corruption could be silently ignored in some situation. Differential Revision: https://phab.mercurial-scm.org/D8276

heptapod-ci: fix test paths in the listing file Now what we run the test from the root, we need to list test name from the root. Differential Revision: https://phab.mercurial-scm.org/D8275

hg-core: add a compilation error if trying to compile outside of Linux For now, we can only provide support for Linux in `hg-core`, so we have to be explicit about it in case anyone wonders why their Dirstate is suddenly broken, or why the crate does not compile (on Windows for example). Differential Revision: https://phab.mercurial-scm.org/D8246

gzip: use the stdlib version with python 3 (issue6284) It turned out that the stdlib gained the feature we missed in python 3.1. We can now use it directly.

gzip: indent the custom Gzip code We need a new conditional in the next changesets (Adding 3.8 support). We do the large code move beforehand for clarity.

gzip: rename the argument to `mtime` to match upstream python Python gained the feature we missed in 3.1. The argument name is `mtime`. We align our version for consistency.

heptapod-ci: run the test from outside the test directory This will help detecting case where this is broken.

run-tests: fix conditional when tests are run outside of `tests` The logic to find `hghave` was using `__file__` but… non absolute path in `__file__` gets wrong as soon as we change directory (thanks python… you are being helpful). The rest of the `run-tests.py` code already deal with this fine. We simply reuse the `RUNTESTDIR` variable to fix it.

tests: fix isinstance test of wrong variable 3086a8627b2970cd7fbf49bc69413c08c68d5514 changed self._case to be a list, but it was forgotten to adjust this line.

discovery: avoid wrong detection of multiple branch heads (issue6256) This fix the code using obsolescence markers to remove "to be obsoleted" heads during the detection of new head creation from push. The code turned out to not use the branch information at all. This lead changeset from different branch to be detected as new head on unrelated branch. The code fix is actually quite simple. New tests have been added to covers these cases. Differential Revision: https://phab.mercurial-scm.org/D8259

test: cleanly skip test-remotefilelog-datapack.py on policy that breaks it That tests requires the pure module to be available. Differential Revision: https://phab.mercurial-scm.org/D8245

rust-format: cleanup ancestors.rs to make rustfmt happy Differential Revision: https://phab.mercurial-scm.org/D8224

heptapod-ci: use strict module policy Without this, test can silently fallback to other compatible policy in some cases. Differential Revision: https://phab.mercurial-scm.org/D8234

histedit: fix formatting after D8150 Differential Revision: https://phab.mercurial-scm.org/D8230

rust-format: make rustfmt happy Differential Revision: https://phab.mercurial-scm.org/D8228

Added signature for changeset 6d121acbb82e

Added tag 5.3.1 for changeset 6d121acbb82e

remotefilelog: add 'changelog' arg to shallowcg1packer.generate (issue6269) This cause traceback on widening using narrow extension when remotefilelog is enabled. Differential Revision: https://phab.mercurial-scm.org/D8134

remotefilelog-test: glob some flaky output line This is similar to ee0959e7d435. The affected line is flaky underload, yet the final result is correct. The command involves background pre-check of output, these are not stable probably because they run in parallel in multiple process. If it become useful to start testing precise internal details of the, they will have to be tested in a more appropriate framework than `.t` tests. Differential Revision: https://phab.mercurial-scm.org/D8179

histedit: py3 fixes for curses mode Differential Revision: https://phab.mercurial-scm.org/D8150

branch: make --force work even when specifying revs The `hg branch` command accepts a `--force` parameter that allows to "set branch name even if it shadows an existing branch". However, before this patch, that didn’t work when specifying revs with `-r`.

setup: exclude the __index__ module from itself when generating This module is generated on Windows to hold all of the extension names and the help summaries, so that they are discoverable inside the py2exe zipfile. The problem is this file is generated by dumping the disabled list, and that list comes from walking the filesystem. So once an install from source into a virtualenv created this module, then next build from source from that virtualenv would also see __index__.py in the filesystem, and include it. Clearly that's wrong because this isn't a real extension, so just filter it from the list when generating it. The Mercurial installer was unaffected by this, but the TortoiseHg package was. In the final package, `hg help -v extensions` and the panel of extensions both showed it. Differential Revision: https://phab.mercurial-scm.org/D8142

tests: stabilize test-amend.t on Windows If $TESTTMP isn't quoted in this context, it ends up like `C:Temphgtests.pikkoxchild1test-amend.t-obsstore-off`. Differential Revision: https://phab.mercurial-scm.org/D8144

py3: fix EOL detection in commandserver.channeledinput This breaks TortoiseHg's email preview which sends b'\n' while readline request is issued and the loop never ends. Spotted by Matt Harbison.

shelve: fix ordering of merge labels Differential Revision: https://phab.mercurial-scm.org/D8140

shelve: add test clearly demonstrating that the conflict labels are backwards Differential Revision: https://phab.mercurial-scm.org/D8139

import: don't ignore `--secret` when `--bypass` is specified Differential Revision: https://phab.mercurial-scm.org/D8126

phabricator: fix a phabsend crash when processing a renamed binary This was a trivial fix, and some more tests are added to cover binary files. Since the old filecontext is passed in, the old name is still available. But I noticed some weirdness around what it marked as binary and not, and what is viewable in Phabricator. Those things have been flagged, and will probably take some digging. Differential Revision: https://phab.mercurial-scm.org/D8133

test: pin the number of CPU for issue4074 tests On machine with an hundreds of CPUs, the "user" CPU time reported can be inflated by the status steps. Since the test especially focus on the diff computation, we restrict the number of CPU to avoid potential issues. Differential Revision: https://phab.mercurial-scm.org/D8112

rust-dirstatemap: add `NonNormalEntries` class This fix introduces the same encapsulation as the `copymap`. There is no easy way of doing this any better for now. `hg up -r null && time HGRCPATH= HGMODULEPOLICY=rust+c hg up tip` on Mozilla Central, (not super recent, but it doesn't matter): Before: 7:44,08 total After: 1:03,23 total Pretty brutal regression! This is a graft on stable of cf1f8660e568 Differential Revision: https://phab.mercurial-scm.org/D8111

rust-dirstatemap: cache non normal and other parent set Performance of `hg update` was significantly worse since the introduction of the Rust `dirstatemap`. This regression was noticed by Valentin Gatien-Baron when working on a large repository, as it goes unnoticed for smaller repositories like Mercurial itself. This fix introduces the same getter/setter mechanism at `hg-core` level as for `set/get_dirs`. While this technique is, as previously discussed, quite suboptimal, it fixes an important enough problem. Refactoring `hg-core` to use the typestate pattern could be a good approach to improving code quality in a future patch. This is a graft of stable of 83b2b829c94e Differential Revision: https://phab.mercurial-scm.org/D8110

chgserver: spawn new process if schemes change The schemes extension updates hg.schemes table. It's technically possible for hg.repository() to look for e.g. ui.schemes instead of depending on module-local table, but I don't think the change would make much sense since [schemes] is usually specified in ~/.hgrc and thus it can be considered static data.

tests: accept new bzr message about switching branches The new version apparently prints "Switched to branch at " instead of "Switched to branch: ". Differential Revision: https://phab.mercurial-scm.org/D8106

tests: add workaround for bzr bug This started failing for me today. I guess my bzr was upgraded. Differential Revision: https://phab.mercurial-scm.org/D8105

test: simplify test-amend.t to avoid race condition Insted on relying on sleep, we could simply have the editor do the file change. This remove the reliance on "sleep" and avoid test failing on heavy load machine. To test this, I reverted the code change in 5558e3437872 and the test started failing again. This is a graft on stable of 141ceec06b55 which should have targeted for stable. Differential Revision: https://phab.mercurial-scm.org/D8103

remotefilelog-test: glob some flaky output line (issue6083) The two following lines are flaky underload, yet the final result is correct. The command involves background pre-check of output, these are not stable probably because they run in parallel in multiple process. I spent a couple of hours trying to understand the pattern and gave up. The documented intend of these tests is safely guaranteed by checking the cache content after the command. If it become useful to start testing precise internal details of the, they will have to be tested in a more appropriate framework than `.t` tests. Differential Revision: https://phab.mercurial-scm.org/D8102

resourceutil: blacken

py3: fully fix bundlepart.__repr__ to return str not bytes My previous fix did not fully fix the issue: it would attempt to use %-formatting to combine two strs into a bytes, which won't work. Let's just switch the entire function to operating in strs. This can cause a small output difference that will likely not be noticed since no one noticed that the method wasn't working at all before: if `id` or `type` are not-None, they'll be shown as `b'val'` instead of `val`. Since this is a debugging aid and these strings shouldn't be shown to the user, slightly rough output is most likely fine and it's likely not worthwhile to add the necessary conditionals to marginally improve it. Differential Revision: https://phab.mercurial-scm.org/D8091

heptapod-ci: add a job to test the rust version of Mercurial The rust version of Mercurial is not currently tested by anything else. So it get quite important that developer runs it. Differential Revision: https://phab.mercurial-scm.org/D8017

heptapod-ci: run the --pure test too These are usually rarely run by individual developper because they are slow. However it is important that they stay happy. Differential Revision: https://phab.mercurial-scm.org/D8016

heptapod-ci: run the normal test suite The usual tests should be run too. We skip the "tests-check*.t" one because their are already covered by another Ci step. Differential Revision: https://phab.mercurial-scm.org/D8015

heptapod-ci: also run the dedicated rust test for the rust code The Rust code has various standard rust test that are fast to run. So let's run them. Differential Revision: https://phab.mercurial-scm.org/D8014

heptapod-ci: run test with python3 too Python3 is the future^W present, it is important to run tests with it too. Differential Revision: https://phab.mercurial-scm.org/D8013

heptapod-ci: colorize output The run result are nicer to read with color. Differential Revision: https://phab.mercurial-scm.org/D8012

heptapod-ci: add a basic file to be able to run tests with heptapod Having this yaml file somewhere in the main mercurial repository makes it trivial for contributors using heptapod to run CI on their in-progress work. There are alot of different combination (python2/python3 pure/cext/rust/pypy) to be tested and making sure all of them are covered manually is cumbersome. Automatic CI runnig on draft really helps in that matters. We start small bu later changesets will add more step testing more of the variants. The series is targetted on stable to make it available to the widest amount of contribution possible. The definition of the docker files used for this are available here: https://dev.heptapod.net/octobus/ci-dockerfiles Differential Revision: https://phab.mercurial-scm.org/D8011

worker: manually buffer reads from pickle stream My previous fix (D8051, cb52e619c99e, which added Python's built-in buffering to the pickle stream) has the problem that the selector will ignore the buffer. When multiple pickled objects are read from the pipe into the buffer at once, only one object will be loaded. This can repeat until the buffer is full and delays the processing of completed items until the worker exits, at which point the pipe is always considered readable and all remaining items are processed. This changeset reverts D8051, removing the buffer again. Instead, on Python 3 only, we use a wrapper to modify the "read" provided to the Unpickler to behave more like a buffered read. We never read more bytes from the pipe than the Unpickler requests, so the selector behaves as expected. Also add a test case for "pickle data was truncated" issue. https://phab.mercurial-scm.org/D8051#119193 Differential Revision: https://phab.mercurial-scm.org/D8076

py3: __repr__ needs to return str, not bytes Differential Revision: https://phab.mercurial-scm.org/D8089

config: also respect HGRCSKIPREPO in the zeroconf extension Differential Revision: https://phab.mercurial-scm.org/D8075

config: also respect HGRCSKIPREPO in hgwebdir_mod Differential Revision: https://phab.mercurial-scm.org/D8074

config: also respect HGRCSKIPREPO in `dispatch._getlocal` For some reason, we are also reading the local config in that function. Differential Revision: https://phab.mercurial-scm.org/D8073

config: add a function in `rcutil` to abstract HGRCSKIPREPO We wil need to respect this environment variable in more place. Differential Revision: https://phab.mercurial-scm.org/D8072

packaging: make the path to Win32 requirements absolute when building WiX Otherwise this broke automation when not launched from `contrib/packaging`. Differential Revision: https://phab.mercurial-scm.org/D8068

Added signature for changeset 7f5410dfc8a6

Added tag 5.3 for changeset 7f5410dfc8a6

rust-dirstatemap: add missing @propertycache While investigating a regression on `hg update` performance introduced by the Rust `dirstatemap`, two missing `@propertycache` were identified when comparing against the Python implementation. This adds back the first one, that has no observable impact on behavior. The second one (`nonnormalset`) is going to be more involved, as the caching has to be done from the Rust side of things. Differential Revision: https://phab.mercurial-scm.org/D8047

worker: Use buffered input from the pickle stream On Python 3, "pickle.load" will raise an exception ("_pickle.UnpicklingError: pickle data was truncated") when it gets a short read, i.e. it receives fewer bytes than it requested. On our build machine, Mercurial seems to frequently hit this problem while updating a mozilla-central clone iff it gets scheduled in batch mode. It is easy to trigger with: #wipe the workdir rm -rf * hg update null chrt -b 0 hg update default I've also written the following program, which demonstrates the core problem: from __future__ import print_function import io import os import pickle import time obj = {"a": 1, "b": 2} obj_data = pickle.dumps(obj) assert len(obj_data) > 10 rfd, wfd = os.pipe() pid = os.fork() if pid == 0: os.close(rfd) for _ in range(4): time.sleep(0.5) print("First write") os.write(wfd, obj_data[:10]) time.sleep(0.5) print("Second write") os.write(wfd, obj_data[10:]) os._exit(0) try: os.close(wfd) rfile = os.fdopen(rfd, "rb", 0) print("Reading") while True: try: obj_copy = pickle.load(rfile) assert obj == obj_copy except EOFError: break print("Success") finally: os.kill(pid, 15) The program reliably fails with Python 3.8 and succeeds with Python 2.7. Providing the unpickler with a buffered reader fixes the issue, so let "os.fdopen" create one. https://bugzilla.mozilla.org/show_bug.cgi?id=1604486 Differential Revision: https://phab.mercurial-scm.org/D8051

packaging: lowercase the `contrib` and `templates` directories with Inno I have no idea why these (and `contrib/vim`) were leading with uppercase with Inno, but not WiX. It probably doesn't matter too much, but might be a problem with `templates` if the user enabled case sensitivity on NTFS. Differential Revision: https://phab.mercurial-scm.org/D8063

packaging: merge the requirements.txt files for WiX and Inno Now that the content is common, there's no need to have separate files. The content still differs from the non-Windows platforms though. Differential Revision: https://phab.mercurial-scm.org/D8066

packaging: bundle dulwich, keyring, and pywin32-ctypes with WiX too TortoiseHg installs these, which is possibly where they originated (though I would have thought it more likely to be in the WiX installer, given its heritage). When I was working on the TortoiseHg app for Mac (which uses the similar `py2app`), it wasn't possible to use the keyring extension (even externally) without bundling this keyring package into the app. Assuming the same principle applies here, these would enable some common extensions. One of the things that the TortoiseHg packager on macOS does now is it adds the user's local `site-packages` directory to `sys.path`. That would allow the user to install these critical modules in cases like this. But that can probably wait for py3 packaging. The only difference in the installed packages that I see now is WiX also bundles distutils for some reason. I suppose that's not harming anything, so I'm not touching it. The only orphans in the install directories when comparing WiX and Inno now is the Copying.txt vs COPYING.rtf, the two uninstaller files for Inno, and a `Mercurial.url` file in Inno. I have no idea what that is, and it has *.ini syntax with a single field pointing to the Mercurial homepage. Differential Revision: https://phab.mercurial-scm.org/D8062

packaging: bundle the default mercurial.ini template with Inno also This is a step towards converging on the same installer content on Windows. Differential Revision: https://phab.mercurial-scm.org/D8061

packaging: set the FileVersion field in the Inno installer executable Previously, Properties > Details > File version showed "0.0.0.0". This appears to be a longstanding issue, and not part of the refactoring this cycle. Differential Revision: https://phab.mercurial-scm.org/D8060

packaging: move the version normalization function to the util module This will be used with Inno as well. Since this module isn't platform specific, rename to include that this is meant for Windows. (Mac has a different format.) Differential Revision: https://phab.mercurial-scm.org/D8059

resourceutil: account for the non-resource-like file hierarchy under py2exe After 9e367157a990, config files for py2exe were expected to be in C:\Program Files\Mercurial\mercurial\defaultrc because of the implied resource structure of 'mercurial.defaultrc.*.rc', relative to the executable. Accomodating this would require changes to the WIX and Inno scripts (and perhaps the script that generates the WIX script), as well as 3rd party bundlers like TortoiseHg. But these files aren't read as resources anyway- they fall back to the filesystem APIs. (If we really wanted to carry on the charade, the installer would have to also sprinkle various empty __init__.py files around.) Instead, this simply prunes the 'mercurial.' portion of the resource name when run with py2exe. (PyOxidizer uses the resources API, not the filesystem fallback, so it is unaffected.) Since this hack only affects the py2 Windows installers and is less risky, I think it's reasonable. We haven't needed to load any 3rd party resource up to this point, and would have to make packaging changes anyway to handle that. Differential Revision: https://phab.mercurial-scm.org/D8058

wix: restore COPYING.rtf This got truncated to 0 bytes in 0ab651b5f77c when the Phabricator extension crashed because it's a binary file. That caused the license page in the WIX installer to be empty. I don't remember if I needed to resubmit after the bug was fixed, so let's try this again with the current stable. If this fails, I'll retry with 5.1 to see if this is a regression in the API changeover last cycle. Differential Revision: https://phab.mercurial-scm.org/D8052

resourceutil: correct the root path for file based lookup under py2exe This silly copy/paste error caused "Mercurial" to be truncated from "C:\Program Files". The fact that "helptext" and "defaultrc" are now in a subpackage of "mercurial" added it back on, and everything seemed to work. But that broke if not installed to the default directory, and also caused TortoiseHg to look at Mercurial's config files instead of its own. Differential Revision: https://phab.mercurial-scm.org/D8054

wix: use original version string for MSI filename Version string normalization is mostly to placate MSI requirements. I think it makes sense to use the original version string in filenames. Since we can have distinct versions normalizing to the same MSI version string, this will allow us to distinguish between different actual version strings based on the filename. Differential Revision: https://phab.mercurial-scm.org/D8005

wix: always normalize version string Before, it was possible to pass in a custom version string which would not be valid in MSI. So we always normalize the version string. While we're here, also print when we normalize the version string, for better visibility. Differential Revision: https://phab.mercurial-scm.org/D8004

wix: more robust normalization of RC version components MSI has strict version requirements where the format is `A.B.C[.D]` and all fields must be numeric (https://docs.microsoft.com/en-us/windows/win32/msi/productversion?redirectedfrom=MSDN). Only the first 3 are used by the installer itself. Mercurial's version strings can have `rcN` and an optional `+<commit>-<date>` fragment at the end. This commit teaches the MSI version normalization to handle both of these more robustly. Before, we would throw away the `.rcN` component completely. e.g. `5.3rc1` would get normalized to `5.3.0`. And worse, `5.3rc0+5-abcdef` would get normalized to `5.3.5`. After this commit, presence of an `.rcN` provides the value for a 4th field. e.g. `5.3rc1` -> `5.3.0.1`. In addition, the commit count from the `+` suffix gets normalized into the 4th version component, but only if the original version string didn't have a 4th version component or if no `rcN` is present. e.g. `5.3+5-abcdef` is `5.3.0.5`. Differential Revision: https://phab.mercurial-scm.org/D8003

copyright: update to 2020 Differential Revision: https://phab.mercurial-scm.org/D8006

phabricator: fix a crash when submitting binaries (issue6260) I think this assumed that `p1()` returned the changectx instead of the previous filelog entry. Differential Revision: https://phab.mercurial-scm.org/D8010

packaging: add configparser to inno requirements file This dependency is missing and pip complains about it in strict hashing mode. How this was missed, I have no clue. Differential Revision: https://phab.mercurial-scm.org/D7973

Added signature for changeset e4344e463c0c

Added tag 5.3rc1 for changeset e4344e463c0c

packaging: rename hgrc.d to defaultrc for Windows config files next to the exe The code and the help still says that it will read hgrc.d next to the executable. But this directory needs to exist to read the resource based config files. Otherwise even `hg version` errors out: $ /c/Program\ Files/Mercurial/hg.exe version Traceback (most recent call last): File "hg", line 43, in <module> File "mercurial\dispatch.pyc", line 110, in run File "mercurial\dispatch.pyc", line 226, in dispatch File "mercurial\ui.pyc", line 308, in load File "mercurial\rcutil.pyc", line 99, in rccomponents File "mercurial\rcutil.pyc", line 69, in default_rc_resources File "mercurial\utils\resourceutil.pyc", line 84, in contents WindowsError: [Error 3] The system cannot find the path specified: 'c:\\Program Files\\mercurial\\defaultrc\\*.*' Differential Revision: https://phab.mercurial-scm.org/D7981

resourceutil: ensure `_rootpath` is defined under py2exe Can't even run `hg version` without this. Differential Revision: https://phab.mercurial-scm.org/D7980

crecord: fix a concatenation of bytes and str on py3 Differential Revision: https://phab.mercurial-scm.org/D7970

recover: fix typos Differential Revision: https://phab.mercurial-scm.org/D7971