debugshell: disable demand importer when importing debugger For reasons I can't explain (but likely have something to do with a combination of __import__ inferring default values for arguments and the demand importer mechanism further assuming defaults), the demand importer isn't playing well with IPython. Without this patch, we get a failure "ValueError: Attempted relative import in non-package" when attempting to import "IPython." The stack has numerous demandimport calls on it and adding "IPython" to the exclude list in demandimport isn't enough to make the problem go away, which means the issue is likely somewhere in the bowells of IPython. It's easier to just disable the demand importer when importing the debugger.

status: change + back out == clean (API) After backing out a change, so the file contents is equal to a previous revision of itself, we currently report the status between the two equal revisions as modified. This is because context._buildstatus() reports any file whose new nodeid is not equal to _newnode as modified. That magic nodeid is given only to files added or modified in the working directory, so any file whose nodeid has changed between two revisions will be reported as modified. Fix by simply comparing the file contents for all cases where the nodeid changed, whether they are in the working copy or committed. Marking with (API) as it subtly changes the semantics of the method.

convert: use manifest.diff() instead of ctx.status() mercurial_source.getchanges() seems to care about files whose nodeid has changed even if their contents has not (i.e. it has been reverted/backed out). The method uses ctx1.status(ctx2) to find differencing files. However, that method is currently broken and reports reverted changes as modified. In order to fix that method, we first need to rewrite getchanges() using manifest.diff(), which does report reverted files as modified (because it's about differences in the manifest, so about nodeids).

convert: replace cache of (m,a,r) by (ma,r) The next commit will rewrite the way we find changes between two manifests. By making the cache not care about the difference between added and modified files, we don't require the rewritten code to care about that difference either. Also extract the call to ctx.status() to simplify the next commit.

convert: use _ prefix for private methods in hg sink This makes it clearer which methods are part of the interface defined by the superclass.

children: update help with replacement

graphlog: update help with replacement

histedit: clarify modes also fix terse command syntax

histedit: explain basics of histedit commands This should be hooked into @action via an extended help argument, but that is future work.

histedit: report the unacceptable changeset

mdiff: don't emit a diff header for empty trivial deltas An empty trivial delta, coded as (0, 0, 0) makes the delta application do nothing, but still takes 12 bytes, while skipping it altogether works as much, without taking any space at all.

commands: get rid of empty try/finally block from _dograft This diff is purely an indentation change to clean up a block that was kept in place to make 77995317b374 easier to read.

commands: get rid of empty try/finally block from _dobackout This diff is purely an indentation change to clean up a block that was kept in place to make c7217f1458bf easier to read.

commands: get rid of empty try/finally block from import_ This diff is purely an indentation change to clean up a block that was kept in place to make 713b09fc9fbb easier to read.

streamclone: use context manager for writing files These are the file writes that have the most to gain from background I/O. Plug in a context manager so I can design the background I/O mechanism with context managers in mind.

scmutil: use context managers for file handles Now that we dropped support for Python 2.4, we are able to use context managers. Let's replace the try..finally pattern in scmutil.py with context managers, which close files automatically when the context manager is exited. There should be no change in behavior with this patch. Why convert to context managers if nothing is broken? I'm working on closing file handles in background threads to improve performance on Windows. As part of this, I realized there could be some future issues if the background file closing code isn't designed with context managers in mind. So, I'd like to switch some code to context managers so I can design an API that works with context managers.

statichttprepo: implement __enter__ and __exit__ on httprangeheader httprangeheader behaves like a file object. Implement __enter__ and __exit__ so it can be used as a context manager, just like file objects.

osutil: implement __enter__ and __exit__ on posixfile So they can be used as context managers.

util: introduce ctxmanager, to avoid nested try/finally blocks This is similar in spirit to contextlib.nested in Python <= 2.6, but uses an extra level of indirection to avoid its inability to clean up if an __enter__ method raises an exception. Why add this mechanism? It greatly simplifies scoped resource management, and lets us eliminate several hundred lines of try/finally blocks. In many of these cases the "finally" is separated from the "try" by hundreds of lines of code, which makes the connection between resource acquisition and disposal difficult to follow. (The preferred mechanism would be the "multi-with" syntax of 2.7+, but Mercurial can't move to 2.7 for a while.) Intended use: >>> with ctxmanager(lambda: file('foo'), lambda: file('bar')) as c: >>> f1, f2 = c() This will open both foo and bar when c() is invoked, and will close both upon exit from the block. If the attempt to open bar raises an exception, the block will not be entered - but foo will still be closed.

hghave: support HGMODULEPOLICY for pure HGMODULEPOLICY was introduced in 4374d819ccd5

merge with stable

tests: extend check-commit self-tests This now contains both positive and negative tests for almost all the check-commit rules.

encoding: handle UTF-16 internal limit with fromutf8b (issue5031) Default builds of Python have a Unicode type that isn't actually full Unicode but UTF-16, which encodes non-BMP codepoints to a pair of BMP codepoints with surrogate escaping. Since our UTF-8b hack escaping uses a plane that overlaps with the UTF-16 escaping system, this gets extra complicated. In addition, unichr() for codepoints greater than U+FFFF may not work either. This changes the code to reuse getutf8char to walk the byte string, so we only rely on Python for unpacking our U+DCxx characters.

bmstore: add handling of the active bookmark This further centralizes the handling of bookmark storage, and will help get some lingering bookmarks business out of localrepo. Right now, this change implies reading of the active bookmark to also imply reading all bookmarks from disk - for users with many many bookmarks this may be a measurable performance hit. In that case, we should migrate bmstore to be able to lazy-read its properties from disk rather than having to eagerly read them, but I decided to avoid doing that to try and avoid some potentially complicated filecache decorator issues. This doesn't move the logic for writing the active bookmark into a transaction, though that is probably the correct next step. Since the API probably needs to morph a little more, I didn't bother marking bookmarks.{activate,deactivate} as deprecated yet.

patchbomb: treat empty address list as no addresses Previously it wasn't possible to use configuration to avoid being prompted for e.g. a CC list when using patchbomb to send emails. We now make it possible to supply an empty value.

config: add hasconfig method and supporting plumbing We add the hasconfig method to make it possible to distinguish between a config value that was never supplied and one that is empty.

verify: replace "output parameters" by return values _verifychangelog() and _verifymanifest() accept dictionaries that they populate. We pass in empty dictionaries, so it's clearer to create them in the functions and return them.

shelve: hook afterresolvedstates

check-code: allow only-whitespace lines in tests These turn out to be necessary to embed diffs with blank lines in test input. So we now complain about whitespace following a character.

check-commit: try to curb bad commit summary keywords The goal of commit summary keywords is to help us sort, categorize, and filter our voluminous commits for our release notes in a way that's helpful and meaningful to end users. Lately, there have been a huge number of "keywords" that are neither words nor particularly key. This patch tries to discourage that by narrowing the allowed characters to alphanumeric. In particular, it doesn't allow "." (method, function names, and file extensions) and "/" (filenames). It also gives a short reminder of what a keyword ought to be.

changegroup: don't add a second trailing '/' in dir name The paths given from treemanifest.dir() already contains the trailing slash.

changegroup: remove left-over debugging help

run-tests: skip threading for a single test Threading is incompatible with most Python debuggers, which makes debugging run-tests.py a real pain. If there is only one test to run, skip using a thread for it. Note that --debug is not compatible with debugging tests, since it bypasses the output handling, which is where much of the excitement is.

sslutil: fix reversed logic (issue5034)

installer: add windows application version number to inno installer script This addition to the inno installer script means that the windows uninstaller registry key “DisplayVersion" is set to the application version number and will show in Add/Remove Programs.

run-tests: add 'diff' entry in json report This patch adds to the json report the "diff" between expected and observed result. This diff can be useful for automatically filing bug report on failing tests.

bookmarks: make _readactive safe when readlines raises ENOENT When reading over static http, the file isn't actually opened until the readlines() call, so we have to check for ENOENT IOErrors here too. This is necessary so that we can use the bmstore everywhere for managing the active bookmark, which will be true in the next change.

wix: add help for current internal topics This makes the changes in a79cba6cb206 and 84784f834b3a available on Windows. I'm not setup to make the installer, so someone with experience in this area should probably give it a look. In looking around to try to figure out how to build the installer, it looks like the Makefile may need an update to $DOCFILES.

help: fix quoting for bundle1 options

merge with stable

extdiff: use @command decorator to set up diff commands It can set "inferrepo" attribute appropriately.

extdiff: factor out list of common options

dispatch: copy inferrepo attribute to alias commands The other attributes are copied. Let's do the same for the inferrepo.

transplant: specify the right file and path for unfinishedstates

transplant: only use checkunfinished if not continue

transplant: correct language to use working directory

histedit: replace @addhisteditaction with @action @action supports verbs, messages, priority, and internal messages should be translated. internal means the action should not be listed. geteditcomment will construct the verbs list based on @actions (prefering priority over non priority, otherwise favoring verbs with short forms over verbs without).

histedit: prefer edit commit, edit message, use commit Selecting editing commits, rewording commit messages, and selecting commits are key actions, we will prefer them more generally in a future commit, this pulls them ahead before that to make the diffs easier to read. The remaining commands are left alphabetically sorted

histedit: replace editcomment with a function

debugignore: find out why a file is being ignored (issue4856) This patch adds a capability to hg debugignore: to explain why a given file is being ignores by mercurial. We display the filename, line and linenumber of the rule that lead us to ignore the file.

debugignore: find out if a file is being ignored Before this patch debugignore was just displaying the list of ignore patterns. This patch makes it support a list of filename as argument and tells the user if those given files are ignored or not.

dirstate: add a way to get the ignore file/line matching an ignored file This information will be used to improve debugignore (issue4856).

clone: move bookmarks and checkouts before pull help The bookmark/checkout help actually split the pull help. The subsequent verbose container is talking about pull too. This change puts the pull help back together again.

status: revert + flag-change == modified After just changing the flag on a file, plain 'hg status' will report the file as modified. However, after reverting a file to a previous revision's state and changing the flag, it will be reported as clean. Fix by comparing the flags that were previously ignored in context._buildstatus().

util: remove outdated comment about construction overhead An old implementation of this class (possibly only in my local repo) allocated nodes in the cache during construction time, making __init__ slow for large cache capacities. The current implementation lazily grow the cache size, making this comment wrong.

test-transplant.t: improve test coverage * ?, x, q * not a parent * --source * outstanding local changes * outstanding uncommitted merges * no revision checked out * checkopts all+branch+rev * checkopts all-branch * checkopts no-args * checkopts continue+all * revset:transplanted(...) * filter corrupted changeset