commiteditor: refactor default extramsg

filemerge: add internal:tagmerge merge tool Add a new internal:tagmerge merge tool which implements an automatic merge algorithm for mercurial's tag files The tagmerge algorithm is able to resolve most merge conflicts that currently would trigger a .hgtags merge conflict. The only case that it does not (and cannot) handle is that in which two tags point to different revisions on each merge parent _and_ their corresponding tag histories have the same rank (i.e. the same length). In all other cases the merge algorithm will choose the revision belonging to the parent with the highest ranked tag history. The merged tag history is the combination of both tag histories (special care is taken to try to combine common tag histories where possible). The algorithm also handles cases in which tags have been manually removed from the .hgtags file and other similar corner cases. In addition to actually merging the tags from two parents, taking into account the base, the algorithm also tries to minimize the difference between the merged tag file and the first parent's tag file (i.e. it tries to make the merged tag order as as similar as possible to the first parent's tag file order). The algorithm works as follows: 1. read the tags from p1, p2 and the base - when reading the p1 tags, also get the line numbers associated to each tag node (these will be used to sort the merged tags in a way that minimizes the diff to p1). Ignore the file numbers when reading p2 and the base 2. recover the "lost tags" (i.e. those that are found in the base but not on p1 or p2) and add them back to p1 and/or p2 - at this point the only tags that are on p1 but not on p2 are those new tags that were introduced in p1. Same thing for the tags that are on p2 but not on p2 3. take all tags that are only on p1 or only on p2 (but not on the base) - Note that these are the tags that were introduced between base and p1 and between base and p2, possibly on separate clones 4. for each tag found both on p1 and p2 perform the following merge algorithm: - the tags conflict if their tag "histories" have the same "rank" (i.e. length) _AND_ the last (current) tag is _NOT_ the same - for non conflicting tags: - choose which are the high and the low ranking nodes - the high ranking list of nodes is the one that is longer. In case of draw favor p1 - the merged node list is made of 3 parts: - first the nodes that are common to the beginning of both the low and the high ranking nodes - second the non common low ranking nodes - finally the non common high ranking nodes (with the last one being the merged tag node) - note that this is equivalent to putting the whole low ranking node list first, followed by the non common high ranking nodes - note that during the merge we keep the "node line numbers", which will be used when writing the merged tags to the tag file 5. write the merged tags taking into account to their positions in the first parent (i.e. try to keep the relative ordering of the nodes that come from p1). This minimizes the diff between the merged and the p1 tag files This is done by using the following algorithm - group the nodes for a given tag that must be written next to each other - A: nodes that come from consecutive lines on p1 - B: nodes that come from p2 (i.e. whose associated line number is None) and are next to one of the a nodes in A - each group is associated with a line number coming from p1 - generate a "tag block" for each of the groups - a tag block is a set of consecutive "node tag" lines belonging to the same tag and which will be written next to each other on the merged tags file - sort the "tag blocks" according to their associated number line - put blocks whose nodes come all from p2 first - write the tag blocks in the sorted order Notes: - A few tests have been added to test-tag.t. These tests are very specific to the new internal:tagmerge tool, so perhaps they should be moved to their own test file. - The merge algorithm was discussed in a thread on the mercurial mailing list. In http://markmail.org/message/anqaxldup4tmgyrx a slightly different algorithm was suggested. In it the p1 and p2 tags would have been interleaved instead of put one before the other. It would be possible to implement that but my tests suggest that the merge result would be more confusing and harder to understand.

filemerge: use non-minimal conflict marker regions (BC) As extensively detailed by Pierre-Yves[1], simplemerge's minimal markers can result in hopeless confusion for many common merges. As it happens, we accidentally inherited this behavior when we borrowed simplemerge from bzr; it is not the behavior used by RCS's merge(1), Since merge(1) (and not bzr) is what we aim to emulate when emulating RCS's merge markers, we simply turn this feature off. This brings us in line with the behavior of CVS, SVN, and Git as a bonus. (NB: using conflict markers with Mercurial is discouraged.) [1] http://markmail.org/message/wj5mh3lc46czlvld convert glob tessa

test: use more elaborated content in ``test-conflict.t`` We are going to introduce a setting to control the "minimisation" feature of ``internal:merge``. So we need more interesting conflicting content. We change the content in an independent changeset to make sure the coming code change leave the output unchanged.

run-tests: make --view work again

filemerge: use 'basic' as the default of '[ui] mergemarkers' for safety Before this patch, 'detailed' is used as the default of '[ui] mergemarkers'. This embeds non-ASCII characters in tags, branches, bookmarks, author and/or commit descriptions into merged files in the encoding specified by '--encoding' global option, 'HGENCODING' or other locale setting environment variables. But, if files to be merged use another encoding, this behavior breaks consistency of encoding in merged files. For example, ISO-2022-JP or EUC-JP are sometimes used as the file encoding for Japanese characters, because of historical and/or environmental reasons, even though UTF-8 or Shift-JIS are ordinarily used as the terminal encoding. This can't be resolved automatically, because Mercurial doesn't aware encoding of managed files. This patch uses 'basic' as the default of '[ui] mergemarkers' to avoid embedding encoding sensitive characters for safety. This patch puts '[ui] mergemarkers = detailed' into default hgrc file for tests, to reduce changes for tests in this patch.

largefiles: avoid unnecessary creation of .hg/largefiles when opening lfdirstate Previously, the directory '.hg/largefiles' would always be created if it didn't exist when the lfdirstate was opened. If there were no standin files, no dirstate file would be created in the directory. The end result was that enabling the largefiles extension globally, but not explicitly adding a largefile would result in the repository eventually sprouting this directory. Creation of this directory effectively changes readonly operations like summary and status into operations that require write access. Without write access, commands that would succeed without the extension loaded would abort with a surprising error when the extension is loaded, but not actively used: $ hg sum -R /tmp/thg --config extensions.largefiles= parent: 16541:00dc703d5aed repowidget: specify incoming bundle by plain file path to avoid url parsing branch: default abort: Permission denied: '/tmp/thg/.hg/largefiles' This change is simpler than changing the callers of openlfdirstate() to use the 'create' parameter that was introduced in ae57920ac188, and probably how that should have been implemented in the first place.

run-tests: write out scripts in binary mode Caught because Python 3 refuses to write bytes to a non-binary fd.

match: use util.re.escape instead of re.escape For a pathological .hgignore with over 2500 glob lines and over 200000 calls to re.escape, and with re2 available, this speeds up parsing the .hgignore from 0.75 seconds to 0.20 seconds. This causes e.g. 'hg status' with hgwatchman enabled to go from 1.02 seconds to 0.47 seconds.

util.re: add an escape method The escape method in at least one of the modules called 're2' is in C. This means it is significantly faster than the Python code written in 're'. An upcoming patch will have benchmarks.

util.re: move check for re2 into a separate method We're going to use the same check for another method in an upcoming patch.

util: remove no longer used compilere

commands: use util.re.compile instead of util.compilere

config: use util.re.compile instead of util.compilere

match: use util.re.compile instead of util.compilere

util: move compilere to a class We do this to allow us to use descriptors for other related methods. For now, util.compilere does the same thing. Upcoming patches will remove it.

util: rename 're' to 'remod' Upcoming patches will introduce a binding called 're'.

bundle2-push: drop _pushbundle2extraparts All core user are now using the new way. We drop the old way.

bundle2-test: use the new way to extend push content The only core user of the old way were tests. We update them.

bundle2-push: introduce a list of part generating functions Instead of explicitly calling a few function to generate part in the bundle, we now have a list of all part generators. This should make it easier for extensions to adds new part in the bundle. This new way to extend the push deprecates the old `_pushbundle2extraparts` way.

bundle2-push: move changegroup push validation inside _pushb2ctx When bundle2 push includes more than just changesets, we may have no changegroup to push yet still have other data to push. So we now try to performs a bundle2 push in all cases. The check for changegroup inclusion is moved into the ``_pushb2ctx`` function in charge of creating the changegroup part. The bundle2 part is aborted if no actual payload part have been added to the bundle2.

push: use `stepsdone` to control changegroup push through bundle10 or bundle20 We use the newly introduced `pushop.stepsdone` attribute to inform older methods than changegroup have already been pushed using a newer method.

push: add a ``pushop.stepsdone`` attribute This attribute will record what steps were performed during the bundle2 push. This will control whenever the old way push must be performed or skipped. This will ultimately be used by changegroup, phases, obsmarkers, bookmarks and any other kind of data ones may want to exchange even when bundle2 support is missing.

bundle2: add a ``bundle20.nbparts`` property This property can be used to know how much parts have been added to the bundle2. This will be useful to check if any part have been generated for a push.

bundle2-push: extract changegroup logic in its own function We extract the creation of changegroup related parts into its own function. This precludes the inclusion of more diverse data during the bundle2 push. We use a closure to carry the logic that need to be perform when processing the server reply.

bundle2: call _pushbundle2extraparts a bit sooner This is the first step of a refactoring that will ease the inclusion of new part in the bundle2 push and includes more information (like phases) in this push We need to move the function a bit sooner to be able to group the generation of `b2x:check:heads` and `b2x:changegroup` part in an external function. We move it sooner to preserve parts creation order bundle2 tests rely on. At the ends of this refactoring the `_pushbundle2extraparts` will be replaced by another mechanism anyway.

templatekw: add 'subrepos' keyword to show updated subrepositories 'subrepos' template keyword newly added by this patch shows updated subrepositories. For the compatibility with the list of subrepositories shown in the editor at commit: - 'subrepos' is empty, at revisions removing '.hgsub' itself - 'subrepos' is calculated between the revision and the first parent of it, at merge revisions To avoid silent regression, this patch also confirms "hg diff" of ".hgsubstate" and parents for each target revisions in the test.

templatekw: add 'currentbookmark' keyword to show current bookmark easily Before this patch, complicated template expression below is required to show current active bookmark if it is associated with the changeset. "{bookmarks % '{ifeq(bookmark, current, \"{bookmark}\")}'}" This patch add 'currentbookmark' keyword to show current bookmark easily.

context: extend efficient manifest filtering to when all paths are files On a repository with over 250,000 files and 700,000 commits, this improves cases like hg status --rev <rev> -- <file> # rev is not . from 2.1 seconds to 1.4 seconds. There is further scope for improvement here: for a single file or a small set of files, it is probably more efficient to use filelog linkrevs when possible. However there will always be cases where that will fail (multiple commits pointing to the same file revision, removed files...), so this is independently useful.

revset: remove no longer used _missingancestors revset This was undocumented.