Sat, 17 Jun 2017 14:39:10 +0530 py3: pass the path in hg.repository() as bytes
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 17 Jun 2017 14:39:10 +0530] rev 32912
py3: pass the path in hg.repository() as bytes This make test-ancestor.py pass on Python 3.
Sat, 17 Jun 2017 14:38:02 +0530 py3: pass range() into list() to get one explicitly
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 17 Jun 2017 14:38:02 +0530] rev 32911
py3: pass range() into list() to get one explicitly range() on python 3 returns a generator whereas on python 2 returns a list. So to get a list on python 3, we passed it into list()
Sun, 28 May 2017 00:12:38 +0200 check-concurrency: expose the feature as 'concurrent-push-mode'
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 28 May 2017 00:12:38 +0200] rev 32910
check-concurrency: expose the feature as 'concurrent-push-mode' We move the feature to a proper configuration and document it. The config goes in the 'server' section because it feels like something the server owner would want to decide. We pick and open field because it seems likely that other checking levels will emerge in the future. (eg: server like the mozilla-try server will likely wants a "none" value) The option name contains 'push' since this affects 'push' only. The option value 'check-related' is preferred over one explicitly containing 'allow' or 'deny' because the client still have a strong decision power here. Here, the server is just advising the client on the check mode to use.
Fri, 16 Jun 2017 22:57:31 -0700 exchange: switch to usual way of testing for bundle2-ness
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Jun 2017 22:57:31 -0700] rev 32909
exchange: switch to usual way of testing for bundle2-ness We used safehasattr() in one place, but we use isinstance() for this everywhere else, so switch to the latter.
Fri, 16 Jun 2017 21:57:22 -0400 setup: update a comment that blamed py26 for a Windows workaround
Matt Harbison <matt_harbison@yahoo.com> [Fri, 16 Jun 2017 21:57:22 -0400] rev 32908
setup: update a comment that blamed py26 for a Windows workaround
Fri, 16 Jun 2017 20:55:34 -0400 i18n: drop a py25 conditional
Matt Harbison <matt_harbison@yahoo.com> [Fri, 16 Jun 2017 20:55:34 -0400] rev 32907
i18n: drop a py25 conditional I'm not sure how to test this one. `make update-pot` spews all kinds of warnings, though it did before this change too.
Fri, 16 Jun 2017 20:49:32 -0400 perf: ensure HGRCPATH is exported on Windows
Matt Harbison <matt_harbison@yahoo.com> [Fri, 16 Jun 2017 20:49:32 -0400] rev 32906
perf: ensure HGRCPATH is exported on Windows After dropping the garbage collector hack, `hg perfstartup` started yelling about not being able to import the evolve extension, which I have in my user config. Launching `env` shows that an empty HGRCPATH isn't exported to the environment. Since `env` doesn't quote, I have no idea if the variable is trimmed, but Mercurial doesn't complain when processing it.
Fri, 16 Jun 2017 20:35:45 -0400 test-status: glob fixes for Windows
Matt Harbison <matt_harbison@yahoo.com> [Fri, 16 Jun 2017 20:35:45 -0400] rev 32905
test-status: glob fixes for Windows
Fri, 16 Jun 2017 18:42:03 -0400 plan9: drop py26 hacks
Matt Harbison <matt_harbison@yahoo.com> [Fri, 16 Jun 2017 18:42:03 -0400] rev 32904
plan9: drop py26 hacks
Sun, 18 Jun 2017 12:25:23 +0900 revset: fix negative ancestor spec to not return changectx objects
Yuya Nishihara <yuya@tcha.org> [Sun, 18 Jun 2017 12:25:23 +0900] rev 32903
revset: fix negative ancestor spec to not return changectx objects The order was unstable because of this.
Mon, 01 May 2017 05:57:36 +0200 obsolete: use ProgrammingError over assert for volatile set registration
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 05:57:36 +0200] rev 32902
obsolete: use ProgrammingError over assert for volatile set registration We have ProgrammingError now.
Fri, 16 Jun 2017 10:13:44 -0700 strip: remove a redundant setting of hookargs
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Jun 2017 10:13:44 -0700] rev 32901
strip: remove a redundant setting of hookargs bundle2.applybundle() will set both 'source' and 'url'.
Fri, 16 Jun 2017 10:38:14 -0700 unbundle: move streamclone error case away from bundle[12] cases
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Jun 2017 10:38:14 -0700] rev 32900
unbundle: move streamclone error case away from bundle[12] cases The bundle1 and bundle2 cases are more similar, and having the streamclone case in between is distracting.
Fri, 16 Jun 2017 10:36:43 -0700 bundle2: use "else" instead of checking condition again
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Jun 2017 10:36:43 -0700] rev 32899
bundle2: use "else" instead of checking condition again
Fri, 16 Jun 2017 09:37:22 -0700 wireproto: update reference to deleted addchangegroup()
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Jun 2017 09:37:22 -0700] rev 32898
wireproto: update reference to deleted addchangegroup() Thanks to Yuya for catching this.
Thu, 15 Jun 2017 13:02:58 +0200 template: add predecessors template
Boris Feld <boris.feld@octobus.net> [Thu, 15 Jun 2017 13:02:58 +0200] rev 32897
template: add predecessors template Add a 'predecessors' template that returns the list of all closest known predecessors for a changectx. The elements of the list are row changectx node id formatted by default as short nodes. The "closest predecessors" are the first locally known revisions encountered while, walking predecessors markers. For example: 1) If a (A, (B)) markers exists and both A and B are locally known A is a closest predecessors of B. 2) If a (A, (B)) and (B, (C)) markers exists and only A and C are known locally, A will be the closest precursors of C. This logic respect repository filtering. So hidden revision will be skipped by this logic unless --hidden is specified. Since we only display the visible predecessors, this template will not display anything in most case. It makes a good candidate for inclusion in the default log output. I added a new test-file for testing the precursors in various scenarios. This test file will also be used for the successors template. A new "obsutil" module has been added to start gathering utility function outside of the large obsolete.py module.
Sat, 22 Apr 2017 20:29:45 +0900 commit: select template by spec.ref name
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 20:29:45 +0900] rev 32896
commit: select template by spec.ref name And load all templates defined in [committemplate] since the selected template is no longer be named as 'changeset'.
Sat, 22 Apr 2017 15:28:29 +0900 commit: do not look up committemplate in template paths (BC)
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 15:28:29 +0900] rev 32895
commit: do not look up committemplate in template paths (BC) From 5375ba75df40 and de5cee8ba088, I don't think the current behavior is intended. Commit templates should be processed as literal templates.
Sat, 06 May 2017 17:03:59 +0900 formatter: always store a literal template unnamed
Yuya Nishihara <yuya@tcha.org> [Sat, 06 May 2017 17:03:59 +0900] rev 32894
formatter: always store a literal template unnamed Now spec.ref should be '' if spec.tmpl is specified. Since spec.ref is the option to select the initial template to be rendered, it doesn't make sense to store the given literal template as spec.ref.
Sat, 22 Apr 2017 20:14:55 +0900 formatter: load templates section like a map file
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 20:14:55 +0900] rev 32893
formatter: load templates section like a map file Since a map file has another level to select a template (spec -> mapfile -> topic), this isn't exactly the same as how a map file works. But I believe most users would expect the new behavior. A literal template is stored as an unnamed template so that it will never conflict with the templates defined in [templates] section.
Sat, 06 May 2017 17:41:05 +0900 test-command-template: rewrite recursion tests by using a map file
Yuya Nishihara <yuya@tcha.org> [Sat, 06 May 2017 17:41:05 +0900] rev 32892
test-command-template: rewrite recursion tests by using a map file A literal template will be unnamed soon, so no recursion will be practically made by using -T option.
Sat, 22 Apr 2017 19:56:47 +0900 templater: add simple interface for unnamed template (API)
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 19:56:47 +0900] rev 32891
templater: add simple interface for unnamed template (API) This provides a simpler API for callers which don't need full templating stack. Instead of storing the given template as the name specified by topic, use '' as the default template to be rendered.
Wed, 14 Jun 2017 20:56:34 -0400 ui: add support for a tweakdefaults knob
Augie Fackler <augie@google.com> [Wed, 14 Jun 2017 20:56:34 -0400] rev 32890
ui: add support for a tweakdefaults knob We've been talking for years about a one-stop config knob to opt in to better behavior. There have been a lot of ideas thrown around, but they all seem to be too complicated to get anyone to actually do the work.. As such, this patch is the stupidest thing that can possibly work in the name of getting a good feature to users. Right now it's just three config settings that I think are generally uncontroversial, but I expect to add more soon. That will likely include adding new config knobs for the express purpose of adding them to tweakdefaults.
Thu, 15 Jun 2017 15:13:18 -0700 localrepo: remove unused addchangegroup() (API)
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 15:13:18 -0700] rev 32889
localrepo: remove unused addchangegroup() (API) This completes the cleanup started in d3775db748a0 (localrepo: move the addchangegroup method in changegroup module, 2014-04-01).
Thu, 15 Jun 2017 13:47:54 -0700 changegroup: rename "dh" to the clearer "deltaheads"
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 13:47:54 -0700] rev 32888
changegroup: rename "dh" to the clearer "deltaheads" We have a lot of frequently used abbreviations, but this is not one of them.
Thu, 15 Jun 2017 13:42:41 -0700 changegroup: rename "srccontent" to "cgnodes"
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 13:42:41 -0700] rev 32887
changegroup: rename "srccontent" to "cgnodes" It's the list of nodes in the incoming changegroup, so "cgnodes" made more sense to me.
Thu, 15 Jun 2017 13:42:35 -0700 revlog: rename list of nodes from "content" to "nodes"
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 13:42:35 -0700] rev 32886
revlog: rename list of nodes from "content" to "nodes" It seems like the reason for "content" is that the variable contains the nodes that the changegroup "contains", see e234eda20984 (revlog: make addgroup returns a list of node contained in the added source, 2012-01-13), but "nodes" seems much clearer.
Thu, 15 Jun 2017 13:25:41 -0700 revlog: delete obsolete comment
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 13:25:41 -0700] rev 32885
revlog: delete obsolete comment The comment seems to refer to code that was deleted in 557988c691d1 (revlog.addgroup(): always use _addrevision() to add new revlog entries, 2010-10-08).
Thu, 15 Jun 2017 13:23:21 -0700 revlog: delete dead assignment in addgroup()
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 13:23:21 -0700] rev 32884
revlog: delete dead assignment in addgroup()
Fri, 16 Jun 2017 03:01:22 +0530 pycompat: move the queue related definitions below queue import
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 03:01:22 +0530] rev 32883
pycompat: move the queue related definitions below queue import This helps in understanding why empty and queue are there.
Fri, 16 Jun 2017 02:48:17 +0530 pycompat: move multiline comments above a function to function doc
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 02:48:17 +0530] rev 32882
pycompat: move multiline comments above a function to function doc pycompat.py is unorganized and looks ugly. Next few patches will try to make it look more cleaner so that adding more code is easy and reading code also. This patch moves the multiline comments above functions to function docs. While moving, I improved the comments and make them better suitable for func doc. While I was here I drop a unrequired and misplaced comment.
Fri, 16 Jun 2017 01:46:47 +0530 py3: replace dict.iterkeys() with iter(dict)
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 01:46:47 +0530] rev 32881
py3: replace dict.iterkeys() with iter(dict) dict.iterkeys() does not exists on Python 3.
Fri, 16 Jun 2017 01:28:23 +0530 py3: explicitly convert dict.values() to a list on py3
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 01:28:23 +0530] rev 32880
py3: explicitly convert dict.values() to a list on py3 dict.values() returns a dict_values() object, so we need to pass it into list() explicitly to get one.
Fri, 16 Jun 2017 01:24:31 +0530 py3: alias long to int and xrange to range in test-ancestor.py on Python 3
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 01:24:31 +0530] rev 32879
py3: alias long to int and xrange to range in test-ancestor.py on Python 3
Fri, 16 Jun 2017 00:36:17 +0530 py3: add a new bytesurl() to convert a str url into bytes
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 00:36:17 +0530] rev 32878
py3: add a new bytesurl() to convert a str url into bytes
Fri, 16 Jun 2017 00:32:52 +0530 py3: add a new strurl() which will convert a bytes url to str
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Jun 2017 00:32:52 +0530] rev 32877
py3: add a new strurl() which will convert a bytes url to str
Thu, 15 Jun 2017 21:59:42 -0400 killdaemons: fix WaitForSingleObject() error handling logic on Windows
Matt Harbison <matt_harbison@yahoo.com> [Thu, 15 Jun 2017 21:59:42 -0400] rev 32876
killdaemons: fix WaitForSingleObject() error handling logic on Windows The error return is not 0 for this method, so _check() was doing nothing when an error occurred. This forces the error path, much like the check for OpenProcess(). The only unhandled return is now WAIT_ABANDONED, but I don't see how that could happen in this case.
Tue, 06 Jun 2017 20:18:06 -0400 killdaemons: explicitly set the ctypes signatures
Matt Harbison <matt_harbison@yahoo.com> [Tue, 06 Jun 2017 20:18:06 -0400] rev 32875
killdaemons: explicitly set the ctypes signatures When I tried importing util.posixfile to work around removing a file opened by another process on Windows, it brought along the declarations in win32.py, which broke the error handling[1]. It doesn't seem worth hacking killdaemons[2] just to isolate these declarations in win32.py, so just declare them here to prevent any future issues. (win32.py mentions the declarations are required by pypy.) [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-May/097905.html [2] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-May/097907.html
Sun, 07 May 2017 14:58:40 -0400 hghave: enable 'serve' on Windows
Matt Harbison <matt_harbison@yahoo.com> [Sun, 07 May 2017 14:58:40 -0400] rev 32874
hghave: enable 'serve' on Windows I've been using a local hghaveaddon.py to enable this for a couple of months with reasonable success, and 'killdaemons' is already enabled on Windows. There's one failure[1] in test-http-proxy.t that this adds, which I can't figure out. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-April/096987.html
Thu, 15 Jun 2017 11:00:29 -0400 contrib: add a ratchet for tests in Python 3
Augie Fackler <augie@google.com> [Thu, 15 Jun 2017 11:00:29 -0400] rev 32873
contrib: add a ratchet for tests in Python 3 This gives us an easy way to automatically update passing tests in Python 3.
Thu, 15 Jun 2017 10:59:48 -0400 contrib: check in a whitelist of passing tests in Python 3
Augie Fackler <augie@google.com> [Thu, 15 Jun 2017 10:59:48 -0400] rev 32872
contrib: check in a whitelist of passing tests in Python 3
Thu, 15 Jun 2017 13:13:36 -0400 tests: try and fail more gracefully with broken unicode escapes
Augie Fackler <augie@google.com> [Thu, 15 Jun 2017 13:13:36 -0400] rev 32871
tests: try and fail more gracefully with broken unicode escapes
Thu, 15 Jun 2017 12:49:13 -0400 md5sum: adapt for python 3 support
Augie Fackler <augie@google.com> [Thu, 15 Jun 2017 12:49:13 -0400] rev 32870
md5sum: adapt for python 3 support
Thu, 15 Jun 2017 11:10:51 -0700 profiling: allow configuring minimum display threshold for hotpath
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 11:10:51 -0700] rev 32869
profiling: allow configuring minimum display threshold for hotpath statprof.display_hotpath() accepts a "limit" function to choose the minimum threshold for samples to display. The default is 0.05, which means you don't need individual items contributing less than 5%. I had a need to adjust this threshold. We already have a config option for it. So let's reuse it. check-config.py doesn't like having multiple defaults for the ui.configwith() calls. The behavior is obviously correct. I'm not sure if it is worth teaching check-config.py how to ignore this. So I've just accepted the new output.
Thu, 15 Jun 2017 11:04:46 -0700 config: document profiling.show{min,max}
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 11:04:46 -0700] rev 32868
config: document profiling.show{min,max}
Thu, 15 Jun 2017 10:58:36 -0700 check-config: look for ui.configwith
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 10:58:36 -0700] rev 32867
check-config: look for ui.configwith We previously weren't looking for this config helper. And, surprise, profiling.py references config options without docs. If I tried hard enough, I could have combined the regexps using a positive lookbehind assertion or something. But I didn't want to make my brain explode. At some point, we should probably do this linting at the tokenizer or ast layer. I'm not willing to open that can of worms right now.
Thu, 15 Jun 2017 10:38:19 -0700 check-config: use named groups in regexp
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 10:38:19 -0700] rev 32866
check-config: use named groups in regexp In preparation for making this regexp a bit more complicated.
Thu, 15 Jun 2017 10:36:23 -0700 check-config: use compiled regexp
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 10:36:23 -0700] rev 32865
check-config: use compiled regexp And split the regexp across multiple lines to make it easier to read.
Thu, 15 Jun 2017 10:46:39 -0700 tests: add test coverage for check-config
Gregory Szorc <gregory.szorc@gmail.com> [Thu, 15 Jun 2017 10:46:39 -0700] rev 32864
tests: add test coverage for check-config We didn't have explicit test coverage before. I broke check-config.py as part of writing patches and was lucky I realized it.
Thu, 15 Jun 2017 22:57:20 -0700 exchange: use context manager for bundle1 unbundling
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 22:57:20 -0700] rev 32863
exchange: use context manager for bundle1 unbundling The lazy locking is not used for bundle1, so using a regular context manager is clearer.
Thu, 15 Jun 2017 14:47:18 -0700 unbundle: use context manager for transaction
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 14:47:18 -0700] rev 32862
unbundle: use context manager for transaction
Thu, 15 Jun 2017 17:00:32 -0700 clonebundle: use context managers for lock and transaction
Martin von Zweigbergk <martinvonz@google.com> [Thu, 15 Jun 2017 17:00:32 -0700] rev 32861
clonebundle: use context managers for lock and transaction
Tue, 11 Apr 2017 21:38:24 +0900 changeset_templater: render template specified by templatespec tuple
Yuya Nishihara <yuya@tcha.org> [Tue, 11 Apr 2017 21:38:24 +0900] rev 32860
changeset_templater: render template specified by templatespec tuple
Sat, 22 Apr 2017 19:29:41 +0900 formatter: render template specified by templatespec tuple
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 19:29:41 +0900] rev 32859
formatter: render template specified by templatespec tuple
Sat, 22 Apr 2017 19:07:00 +0900 formatter: put topic in templatespec tuple
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 19:07:00 +0900] rev 32858
formatter: put topic in templatespec tuple This will allow us to change the initial template reference depending on how the template is looked up. For example, -Tdefault => (ref='changeset', tmpl=None, mapfile='map-cmdline.default') -T'{rev}' => (ref='', tmpl='{rev}', mapfile=None) A literal template given by -T option will be stored as an unnamed template, which will free up the template namespace so that we can load named templates from [templates] section of user config.
Sat, 22 Apr 2017 19:02:47 +0900 cmdutil: pass templatespec tuple directly to changeset_templater (API)
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 19:02:47 +0900] rev 32857
cmdutil: pass templatespec tuple directly to changeset_templater (API) A fewer number of arguments should be better.
Sat, 22 Apr 2017 18:48:38 +0900 formatter: wrap (tmpl, mapfile) by named tuple
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 18:48:38 +0900] rev 32856
formatter: wrap (tmpl, mapfile) by named tuple I'm going to add more options to the templatespec tuple. cmdutil.logtemplatespec() is just an alias now, but it will be changed to a factory function later.
Sat, 22 Apr 2017 18:42:03 +0900 cmdutil: factor out helper to create changeset_templater with literal template
Yuya Nishihara <yuya@tcha.org> [Sat, 22 Apr 2017 18:42:03 +0900] rev 32855
cmdutil: factor out helper to create changeset_templater with literal template changeset_templater has lots of arguments, but most callers only need to specify a literal template 'tmpl'. "hg debugtemplate" has no diff option, which means 'opts' were effectively {}, so dropped opts.
Wed, 14 Jun 2017 23:56:58 -0400 test-dirstate-race: stabilize for Windows
Matt Harbison <matt_harbison@yahoo.com> [Wed, 14 Jun 2017 23:56:58 -0400] rev 32854
test-dirstate-race: stabilize for Windows Without quoting, the output after "custom merge tool" in the next test is an abort trying to open "C:UsersMattAppData..."
Sat, 06 May 2017 16:24:21 +0900 formatter: document lookuptemplate()
Yuya Nishihara <yuya@tcha.org> [Sat, 06 May 2017 16:24:21 +0900] rev 32853
formatter: document lookuptemplate()
(0) -30000 -10000 -3000 -1000 -300 -100 -60 +60 +100 +300 +1000 +3000 +10000 tip