diffstat: make --git work properly on renames (issue6025) `$ hg diff --stat --git` shows only the new filename on renames. I added the old filename also to the output to make it identical with the output of `$ git diff --stat`. Differential Revision: https://phab.mercurial-scm.org/D5628

cmdutil: drop obsolete comment about updating to '.' Obsolete since cf68e2649e0a (status: advertise --abort instead of 'update -C .' to abort a merge, 2018-08-09) and 5b04b6204931 (status: advertise --abort instead of 'update -C .' to abort graft, 2018-08-09). Differential Revision: https://phab.mercurial-scm.org/D5694

mq: slightly simplify check for patched working copy Differential Revision: https://phab.mercurial-scm.org/D5693

localrepo: slightly simplify check for removed parents in _rollback() Differential Revision: https://phab.mercurial-scm.org/D5692

transplant: use bailifchanged() instead of reimplementing it Differential Revision: https://phab.mercurial-scm.org/D5691

revpair: clarify check for empty revset Differential Revision: https://phab.mercurial-scm.org/D5688

revpair: simplify revpair by always relying on smartset.first/last I thinkt the code was written the way it was because it comes from 97b2f26dfc43 (revpair: smartset compatibility, 2014-03-20) and the first/last methods came only later, in 228b0aafb1ce (smartset: add first and last methods, 2014-10-06). Differential Revision: https://phab.mercurial-scm.org/D5687

grep: use set instead of dict with dummy value Differential Revision: https://phab.mercurial-scm.org/D5633

grep: don't look up copy info unless --follow is given If no --follow was given, then the "copy" variable will become None. In that case we would still look up the copy information from the filelog and then ignore it. Let's avoid even looking it up. Differential Revision: https://phab.mercurial-scm.org/D5620

hghave: let OSError with ENOENT through like any other Before this patch, if we get an OSError with ENOENT, we would not re-raise it and would instead run into an undefined variable ("p") soon thereafter. Differential Revision: https://phab.mercurial-scm.org/D5631

cleanup: delete lots of unused local variables These were found by IntelliJ. There are many more, but these seemed pretty safe. Differential Revision: https://phab.mercurial-scm.org/D5629

localrepo: use context manager for lock and transaction in commitctx() Differential Revision: https://phab.mercurial-scm.org/D5624

localrepo: use context manager for locks in commit() Differential Revision: https://phab.mercurial-scm.org/D5623

localrepo: use context manager for transaction in commit() A side-effect is that the transaction is released a little earlier, so the "commit message saved in ..." messages now comes after the "rollback completed" message. That seems slightly better to me. Differential Revision: https://phab.mercurial-scm.org/D5622

commit: print "commit message saved in" message also if bookmark update fails The bookmark update is done within the same transaction, so if fails, the commit will also be rolled back. I just happened to notice this while messing with this code; we have not had reports of crashing bookmark updates from our users. The same applies to the clearing of the merge state, although I don't think that's currently tied into the transaction. Differential Revision: https://phab.mercurial-scm.org/D5621

remotefilelog: remove pointless return statement from constructor Differential Revision: https://phab.mercurial-scm.org/D5630

revset: support ranges in #generations relation

tests: fix module-import warnings in test-update-atomic.t These were caught by test-check-module-imports.t on Python 3. This should also make python3-buildbot green again. Differential Revision: https://phab.mercurial-scm.org/D5674

py3: use dict.items() instead of dict.iteritems() in tests/test-lfs-server.t dict.iteritems() is not present on Python 3. Differential Revision: https://phab.mercurial-scm.org/D5673

py3: add b'' prefixes in tests/test-lfs-serve.t # skip-blame because just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5672

py3: add b'' prefixes in doc/check-seclevel.py # skip-blame because just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5670

tests: remove some over-globbing in test-dispatch.t Hilariously, this was exposed by Python 3 work. Differential Revision: https://phab.mercurial-scm.org/D5689

py3: port test-parseindex.t to Python 3 Differential Revision: https://phab.mercurial-scm.org/D5686

py3: almost fix test-trusted.py The test now only fails due to output format changes on the repr of mercurial.error.ParseError. I'm not really sure how to approach that for now. Differential Revision: https://phab.mercurial-scm.org/D5685

merge with stable

py3: fix test-update-atomic.t The .replace('o', '') hack on oct() return value is required because: % python -c 'print(oct(10))' 012 % python3 -c 'print(oct(10))' 0o12 Differential Revision: https://phab.mercurial-scm.org/D5684

py3: fix test-newcgi.t Differential Revision: https://phab.mercurial-scm.org/D5683

py3: fix up test-encoding-align.t for python3 I'm not super thrilled with how this reads, but the original didn't thrill me either. Differential Revision: https://phab.mercurial-scm.org/D5682

py3: these two casefolding tests pass for me on my Mac I assume the buildbot didn't catch them because it's on a case-sensitive filesystem. Differential Revision: https://phab.mercurial-scm.org/D5681

py3: port test-bugzilla.t to Python 3 Some assorted fixes required in the extension itself, all around bytes/str issues. Differential Revision: https://phab.mercurial-scm.org/D5680

uncommit: set dirstateparents from within _fixdirstate() It's now done in the same way for uncommit and unamend, so we can share the code. Differential Revision: https://phab.mercurial-scm.org/D5662

unamend: fix unamending of renamed rename Before this patch, we were passing in the result of a status call for a different set of commits than what we calculated copies for, which seemed suspicous to me. The rewritten version gets status and copy information from the same sets of commits. Differential Revision: https://phab.mercurial-scm.org/D5661

uncommit: mark old node obsolete after updating dirstate The next patch will start doing more things with the context object for the old node and that ran into problems without this change. Regardless of that, I think it seems better to first update to the new node and then mark the old node obsolete. Differential Revision: https://phab.mercurial-scm.org/D5660

unamend: import "copies" module as "copiesmod" to avoid shadowing Differential Revision: https://phab.mercurial-scm.org/D5659

tests: add more tests of uncommit/unamend with copies The unamend tests show suboptimal behavior. Differential Revision: https://phab.mercurial-scm.org/D5658

tests: clean up after each test in test-unamend.t Differential Revision: https://phab.mercurial-scm.org/D5657

cleanup: use clang-tidy to add missing {} around one-line statements I find this easier to read. Cleanup performed like this: hg files 'set:(**.c or **.cc or **.h) and not "listfile:contrib/clang-format-ignorelist"' | while read f ; do clang-tidy -fix -checks=readability-braces-around-statements $f -- $(python-config --cflags) -Imercurial/cext -Imercurial done make format-c I had to revert chg/chg.c as it's got a construct that seems to confuse clang-tidy, so I'll work on that file later if this change is acceptable. I only tackle files that are under clang-format's authority because otherwise I'd have to do a bunch of manual formatting. A few files didn't get edited because clang-tidy couldn't find some headers. Again, I'll figure that out later assuming this change is accepted. No check-code rule added for now because writing the regex sounds hard. In a perfect world I guess we could write a test that uses clang-tidy on these files, but I think clang-tidy is pretty rarely installed. :/ Differential Revision: https://phab.mercurial-scm.org/D5675

py3: port test-batching.py to python3 I used byteify-strings.py on this file, then manually added the various pycompat and bprint bits as needed. Differential Revision: https://phab.mercurial-scm.org/D5678

py3: fix missing b prefixes in test-arbitraryfilectx.t Test passes on Python 3. # skip-blame b prefixes Differential Revision: https://phab.mercurial-scm.org/D5679

py3: add missing b prefixes in test-acl.t There's one failure left in the test, which looks like a real problem around executing hooks. I have not investigated further. # skip-blame as just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5677

py3: buildbot found more passing tests, thanks to indygreg for most of them Differential Revision: https://phab.mercurial-scm.org/D5676

tests: drop a duplicate definition of a constant Differential Revision: https://phab.mercurial-scm.org/D5663

tests: support URL quoting on Python 3 We could use mercurial.urllibcompat, but meh. This makes things easier to read. The test still fails on Python 3 for some reason. But at least we no longer have an exception. Differential Revision: https://phab.mercurial-scm.org/D5669

tests: write directly to stdout to avoid b'' prefixes This enables the test to pass on Python 3. Differential Revision: https://phab.mercurial-scm.org/D5668

tests: handle string escaping/encoding on Python 3 This code was failing on Python 3 for a few reasons: 1) sys.argv is str and str doesn't have a .decode() 2) the "string_escape" encoding was renamed to "unicode_escape" It is wonky casting to bytes to str to bytes. But this is test code, so meh. I don't believe we exercise any code paths in these tests where the arguments aren't ascii. Differential Revision: https://phab.mercurial-scm.org/D5667

convert: use raw strings for XML strings Due to the source transformer, we were passing bytes into the XML APIs. This results in not finding elements and doing compares against mismatched types. Use raw string literals so we use str everywhere. Differential Revision: https://phab.mercurial-scm.org/D5664

tests: normalize XML values to bytes This fixes some type mismatches. The encoding shouldn't matter for what this script is used for. UTF-8 seems reasonable, especially since I'm pretty sure SVN will emit UTF-8 encoded XML. Differential Revision: https://phab.mercurial-scm.org/D5665

hgweb: ensure template mapping keys are bytes Before, str keys were being added in Python 3 because named arguments to dict() use native str for keys. This caused the templater to fail to find the keys since it was looking for bytes versions. This makes a handful of tests pass on Python 3. We may want to consider having the templater validate that keys in mapping dicts are bytes. But I'm unsure whether this is appropriate and won't be doing this. Differential Revision: https://phab.mercurial-scm.org/D5666

remotefilelog: use %d to format an int Differential Revision: https://phab.mercurial-scm.org/D5656

tests: use bytes for file I/O Otherwise we get various type mismatches. Differential Revision: https://phab.mercurial-scm.org/D5655

tests: make filenames bytes for Python 3 I also snuck a %s -> %d in there to appease Python 3. Differential Revision: https://phab.mercurial-scm.org/D5654

tests: use assertEqual() This avoids a deprecation warning under at least Python 3.7. Differential Revision: https://phab.mercurial-scm.org/D5653

tests: add setsockopt() output on Python 3 Python 3 appears to call setsockopt() where Python 2 did not. Differential Revision: https://phab.mercurial-scm.org/D5652

hgweb: don't use raw string for session vars This r'' is leaking into the templating layer and causing an assertion failure. The r'' was added in d1fccbd50fcd (October 2017). Similar code in hgweb_mod.py was also changed in that changeset. hgweb_mod.py was updated in ec46415ed826 (March 2018) to use webutil.sessionvars(), which doesn't use raw strings. Differential Revision: https://phab.mercurial-scm.org/D5651

tests: normalize to bytes in test-install.t directory() was returning str and hgdirectory() was returning bytes. This made the set compare fail. Let's normalize the types on Python 3 so the test passes. Differential Revision: https://phab.mercurial-scm.org/D5650

config: reject str sections and keys on Python 3 Otherwise we could end up with a dict having both the str and bytes versions of a particular config item. This may cause some tests to regress. I haven't checked. But it is better behavior to fail fast. We could just as easily change this to normalize the values. But I like catching all non-compliant call sites first. Differential Revision: https://phab.mercurial-scm.org/D5649

tests: add size and hash for Python 3 test-archive.t now passes on Python 3.7.1. Differential Revision: https://phab.mercurial-scm.org/D5648

httppeer: use %s for formatting This prevents a b'' from appearing in Python 3 output. We keep the single quotes for backwards compatibility. Differential Revision: https://phab.mercurial-scm.org/D5647

tests: add b'' to notcapable This fixes some exceptions in a few tests. # skip-blame just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5646

tests: add b'' to test-missing-capability.t The test now passes on Python 3. # skip-blame just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5645