Mercurial > hg-stable
changeset 8730:01f0ddb90342
hgrc.5: wrap lines at 70 chars (whitespace cleanup)
| author | Martin Geisler <mg@lazybytes.net> |
|---|---|
| date | Mon, 08 Jun 2009 00:14:24 +0200 |
| parents | f67e5aac4e9e |
| children | f037187a6f68 |
| files | doc/hgrc.5.txt |
| diffstat | 1 files changed, 227 insertions(+), 227 deletions(-) [+] |
line wrap: on
line diff
--- a/doc/hgrc.5.txt Mon Jun 08 00:13:58 2009 +0200 +++ b/doc/hgrc.5.txt Mon Jun 08 00:14:24 2009 +0200 @@ -17,27 +17,25 @@ Mercurial reads configuration data from several files, if they exist. The names of these files depend on the system on which Mercurial is -installed. *.rc files from a single directory are read in -alphabetical order, later ones overriding earlier ones. Where -multiple paths are given below, settings from later paths override -earlier ones. +installed. *.rc files from a single directory are read in alphabetical +order, later ones overriding earlier ones. Where multiple paths are +given below, settings from later paths override earlier ones. (Unix) <install-root>/etc/mercurial/hgrc.d/*.rc:: (Unix) <install-root>/etc/mercurial/hgrc:: Per-installation configuration files, searched for in the directory where Mercurial is installed. <install-root> is the - parent directory of the hg executable (or symlink) being run. - For example, if installed in /shared/tools/bin/hg, Mercurial will - look in /shared/tools/etc/mercurial/hgrc. Options in these files - apply to all Mercurial commands executed by any user in any - directory. + parent directory of the hg executable (or symlink) being run. For + example, if installed in /shared/tools/bin/hg, Mercurial will look + in /shared/tools/etc/mercurial/hgrc. Options in these files apply + to all Mercurial commands executed by any user in any directory. (Unix) /etc/mercurial/hgrc.d/*.rc:: (Unix) /etc/mercurial/hgrc:: Per-system configuration files, for the system on which Mercurial - is running. Options in these files apply to all Mercurial - commands executed by any user in any directory. Options in these - files override per-installation options. + is running. Options in these files apply to all Mercurial commands + executed by any user in any directory. Options in these files + override per-installation options. (Windows) <install-dir>\Mercurial.ini:: or else:: @@ -46,30 +44,30 @@ (Windows) C:\Mercurial\Mercurial.ini:: Per-installation/system configuration files, for the system on which Mercurial is running. Options in these files apply to all - Mercurial commands executed by any user in any directory. - Registry keys contain PATH-like strings, every part of which must - reference a Mercurial.ini file or be a directory where *.rc files - will be read. + Mercurial commands executed by any user in any directory. Registry + keys contain PATH-like strings, every part of which must reference + a Mercurial.ini file or be a directory where *.rc files will be + read. (Unix) $HOME/.hgrc:: (Windows) %HOME%\Mercurial.ini:: (Windows) %HOME%\.hgrc:: (Windows) %USERPROFILE%\Mercurial.ini:: (Windows) %USERPROFILE%\.hgrc:: - Per-user configuration file(s), for the user running Mercurial. - On Windows 9x, %HOME% is replaced by %APPDATA%. - Options in these files apply to all Mercurial commands executed - by this user in any directory. Options in thes files override + Per-user configuration file(s), for the user running Mercurial. On + Windows 9x, %HOME% is replaced by %APPDATA%. + Options in these files apply to all Mercurial commands executed by + this user in any directory. Options in thes files override per-installation and per-system options. (Unix, Windows) <repo>/.hg/hgrc:: Per-repository configuration options that only apply in a particular repository. This file is not version-controlled, and will not get transferred during a "clone" operation. Options in - this file override options in all other configuration files. - On Unix, most of this file will be ignored if it doesn't belong - to a trusted user or to a trusted group. See the documentation - for the trusted section below for more details. + this file override options in all other configuration files. On + Unix, most of this file will be ignored if it doesn't belong to a + trusted user or to a trusted group. See the documentation for the + trusted section below for more details. SYNTAX ------ @@ -97,8 +95,8 @@ -------- This section describes the different sections that may appear in a -Mercurial "hgrc" file, the purpose of each section, its possible -keys, and their possible values. +Mercurial "hgrc" file, the purpose of each section, its possible keys, +and their possible values. [[alias]] alias:: @@ -120,18 +118,17 @@ stable5 = latest -b stable + *Note*: It is possible to create aliases with the same names as -existing commands, which will then override the original -definitions. This is almost always a bad idea! +existing commands, which will then override the original definitions. +This is almost always a bad idea! [[auth]] auth:: - Authentication credentials for HTTP authentication. - Each line has the following format: + Authentication credentials for HTTP authentication. Each line has + the following format: <name>.<argument> = <value> - where <name> is used to group arguments into authentication - entries. + where <name> is used to group arguments into authentication entries. Example: foo.prefix = hg.intevation.org/mercurial @@ -145,23 +142,23 @@ Either '*' or a URI prefix with or without the scheme part. The authentication entry with the longest matching prefix is used (where '*' matches everything and counts as a match of length 1). - If the prefix doesn't include a scheme, the match is performed against - the URI with its scheme stripped as well, and the schemes argument, - q.v., is then subsequently consulted. + If the prefix doesn't include a scheme, the match is performed + against the URI with its scheme stripped as well, and the schemes + argument, q.v., is then subsequently consulted. username;; Username to authenticate with. password;; - Optional. Password to authenticate with. If not given the user will be - prompted for it. + Optional. Password to authenticate with. If not given the user + will be prompted for it. schemes;; - Optional. Space separated list of URI schemes to use this authentication - entry with. Only used if the prefix doesn't include a scheme. Supported - schemes are http and https. They will match static-http and static-https - respectively, as well. + Optional. Space separated list of URI schemes to use this + authentication entry with. Only used if the prefix doesn't include + a scheme. Supported schemes are http and https. They will match + static-http and static-https respectively, as well. Default: https. - If no suitable authentication entry is found, the user is - prompted for credentials as usual if required by the remote. + If no suitable authentication entry is found, the user is prompted + for credentials as usual if required by the remote. [[decode]] decode/encode:: @@ -170,14 +167,13 @@ localization/canonicalization of files. Filters consist of a filter pattern followed by a filter command. - Filter patterns are globs by default, rooted at the repository - root. For example, to match any file ending in ".txt" in the root - directory only, use the pattern "*.txt". To match any file ending - in ".c" anywhere in the repository, use the pattern "**.c". + Filter patterns are globs by default, rooted at the repository root. + For example, to match any file ending in ".txt" in the root + directory only, use the pattern "*.txt". To match any file ending in + ".c" anywhere in the repository, use the pattern "**.c". The filter command can start with a specifier, either "pipe:" or - "tempfile:". If no specifier is given, "pipe:" is used by - default. + "tempfile:". If no specifier is given, "pipe:" is used by default. A "pipe:" command must accept data on stdin and return the transformed data on stdout. @@ -194,19 +190,18 @@ # can safely omit "pipe:", because it's the default) *.gz = gzip - A "tempfile:" command is a template. The string INFILE is - replaced with the name of a temporary file that contains the data - to be filtered by the command. The string OUTFILE is replaced - with the name of an empty temporary file, where the filtered data - must be written by the command. + A "tempfile:" command is a template. The string INFILE is replaced + with the name of a temporary file that contains the data to be + filtered by the command. The string OUTFILE is replaced with the + name of an empty temporary file, where the filtered data must be + written by the command. NOTE: the tempfile mechanism is recommended for Windows systems, where the standard shell I/O redirection operators often have strange effects and may corrupt the contents of your files. - The most common usage is for LF <-> CRLF translation on Windows. - For this, use the "smart" convertors which check for binary - files: + The most common usage is for LF <-> CRLF translation on Windows. For + this, use the "smart" convertors which check for binary files: [extensions] hgext.win32text = @@ -229,16 +224,16 @@ Use the [defaults] section to define command defaults, i.e. the default options/arguments to pass to the specified commands. - The following example makes 'hg log' run in verbose mode, and - 'hg status' show only the modified files, by default. + The following example makes 'hg log' run in verbose mode, and 'hg + status' show only the modified files, by default. [defaults] log = -v status = -m The actual commands, instead of their aliases, must be used when - defining command defaults. The command defaults will also be - applied to the aliases of the commands defined. + defining command defaults. The command defaults will also be applied + to the aliases of the commands defined. [[diff]] diff:: @@ -269,24 +264,22 @@ Optional. Comma-separated list of carbon copy recipients' email addresses. bcc;; - Optional. Comma-separated list of blind carbon copy - recipients' email addresses. Cannot be set interactively. + Optional. Comma-separated list of blind carbon copy recipients' + email addresses. Cannot be set interactively. method;; - Optional. Method to use to send email messages. If value is - "smtp" (default), use SMTP (see section "[smtp]" for - configuration). Otherwise, use as name of program to run that - acts like sendmail (takes "-f" option for sender, list of - recipients on command line, message on stdin). Normally, setting - this to "sendmail" or "/usr/sbin/sendmail" is enough to use - sendmail to send messages. + Optional. Method to use to send email messages. If value is "smtp" + (default), use SMTP (see section "[smtp]" for configuration). + Otherwise, use as name of program to run that acts like sendmail + (takes "-f" option for sender, list of recipients on command line, + message on stdin). Normally, setting this to "sendmail" or + "/usr/sbin/sendmail" is enough to use sendmail to send messages. charsets;; - Optional. Comma-separated list of charsets considered - convenient for recipients. Addresses, headers, and parts not - containing patches of outgoing messages will be encoded in - the first charset to which conversion from local encoding - ($HGENCODING, ui.fallbackencoding) succeeds. If correct - conversion fails, the text in question is sent as is. - Defaults to empty (explicit) list. + Optional. Comma-separated list of charsets considered convenient + for recipients. Addresses, headers, and parts not containing + patches of outgoing messages will be encoded in the first charset + to which conversion from local encoding ($HGENCODING, + ui.fallbackencoding) succeeds. If correct conversion fails, the + text in question is sent as is. Defaults to empty (explicit) list. Order of outgoing email charsets: @@ -310,13 +303,13 @@ Mercurial has an extension mechanism for adding new features. To enable an extension, create an entry for it in this section. - If you know that the extension is already in Python's search - path, you can give the name of the module, followed by "=", with - nothing after the "=". + If you know that the extension is already in Python's search path, + you can give the name of the module, followed by "=", with nothing + after the "=". - Otherwise, give a name that you choose, followed by "=", followed - by the path to the ".py" file (including the file name extension) - that defines the extension. + Otherwise, give a name that you choose, followed by "=", followed by + the path to the ".py" file (including the file name extension) that + defines the extension. To explicitly disable an extension that is enabled in an hgrc of broader scope, prepend its path with '!', as in @@ -345,16 +338,17 @@ usefncache;; Enable or disable the "fncache" repository format which enhances the "store" repository format (which has to be enabled to use - fncache) to allow longer filenames and avoids using Windows reserved - names, e.g. "nul". Enabled by default. Disabling this option ensures - that the on-disk format of newly created repositories will be - compatible with Mercurial before version 1.1. + fncache) to allow longer filenames and avoids using Windows + reserved names, e.g. "nul". Enabled by default. Disabling this + option ensures that the on-disk format of newly created + repositories will be compatible with Mercurial before version 1.1. [[merge-patterns]] merge-patterns:: This section specifies merge tools to associate with particular file patterns. Tools matched here will take precedence over the default - merge tool. Patterns are globs by default, rooted at the repository root. + merge tool. Patterns are globs by default, rooted at the repository + root. Example: @@ -391,9 +385,9 @@ Either just the name of the executable or its pathname. Default: the tool name. args;; - The arguments to pass to the tool executable. You can refer to the files - being merged as well as the output file through these variables: $base, - $local, $other, $output. + The arguments to pass to the tool executable. You can refer to the + files being merged as well as the output file through these + variables: $base, $local, $other, $output. Default: $local $base $other premerge;; Attempt to run internal non-interactive 3-way merge tool before @@ -419,15 +413,17 @@ gui;; This tool requires a graphical interface to run. Default: False regkey;; - Windows registry key which describes install location of this tool. - Mercurial will search for this key first under HKEY_CURRENT_USER and - then under HKEY_LOCAL_MACHINE. Default: None + Windows registry key which describes install location of this + tool. Mercurial will search for this key first under + HKEY_CURRENT_USER and then under HKEY_LOCAL_MACHINE. + Default: None regname;; Name of value to read from specified registry key. Defaults to the unnamed (default) value. regappend;; - String to append to the value read from the registry, typically the - executable name of the tool. Default: None + String to append to the value read from the registry, typically + the executable name of the tool. + Default: None [[hooks]] hooks:: @@ -450,13 +446,13 @@ variables it is passed are listed with names of the form "$HG_foo". changegroup;; - Run after a changegroup has been added via push, pull or - unbundle. ID of the first new changeset is in $HG_NODE. URL from - which changes came is in $HG_URL. + Run after a changegroup has been added via push, pull or unbundle. + ID of the first new changeset is in $HG_NODE. URL from which + changes came is in $HG_URL. commit;; - Run after a changeset has been created in the local repository. - ID of the newly created changeset is in $HG_NODE. Parent - changeset IDs are in $HG_PARENT1 and $HG_PARENT2. + Run after a changeset has been created in the local repository. ID + of the newly created changeset is in $HG_NODE. Parent changeset + IDs are in $HG_PARENT1 and $HG_PARENT2. incoming;; Run after a changeset has been pulled, pushed, or unbundled into the local repository. The ID of the newly arrived changeset is in @@ -472,39 +468,40 @@ pre-<command>;; Run before executing the associated command. The contents of the command line are passed as $HG_ARGS. If the hook returns failure, - the command doesn't execute and Mercurial returns the failure code. + the command doesn't execute and Mercurial returns the failure + code. prechangegroup;; - Run before a changegroup is added via push, pull or unbundle. - Exit status 0 allows the changegroup to proceed. Non-zero status - will cause the push, pull or unbundle to fail. URL from which - changes will come is in $HG_URL. + Run before a changegroup is added via push, pull or unbundle. Exit + status 0 allows the changegroup to proceed. Non-zero status will + cause the push, pull or unbundle to fail. URL from which changes + will come is in $HG_URL. precommit;; Run before starting a local commit. Exit status 0 allows the commit to proceed. Non-zero status will cause the commit to fail. Parent changeset IDs are in $HG_PARENT1 and $HG_PARENT2. preoutgoing;; Run before collecting changes to send from the local repository to - another. Non-zero status will cause failure. This lets you - prevent pull over http or ssh. Also prevents against local pull, - push (outbound) or bundle commands, but not effective, since you - can just copy files instead then. Source of operation is in - $HG_SOURCE. If "serve", operation is happening on behalf of - remote ssh or http repository. If "push", "pull" or "bundle", - operation is happening on behalf of repository on same system. + another. Non-zero status will cause failure. This lets you prevent + pull over http or ssh. Also prevents against local pull, push + (outbound) or bundle commands, but not effective, since you can + just copy files instead then. Source of operation is in + $HG_SOURCE. If "serve", operation is happening on behalf of remote + ssh or http repository. If "push", "pull" or "bundle", operation + is happening on behalf of repository on same system. pretag;; Run before creating a tag. Exit status 0 allows the tag to be created. Non-zero status will cause the tag to fail. ID of - changeset to tag is in $HG_NODE. Name of tag is in $HG_TAG. Tag - is local if $HG_LOCAL=1, in repo if $HG_LOCAL=0. + changeset to tag is in $HG_NODE. Name of tag is in $HG_TAG. Tag is + local if $HG_LOCAL=1, in repo if $HG_LOCAL=0. pretxnchangegroup;; Run after a changegroup has been added via push, pull or unbundle, but before the transaction has been committed. Changegroup is visible to hook program. This lets you validate incoming changes - before accepting them. Passed the ID of the first new changeset - in $HG_NODE. Exit status 0 allows the transaction to commit. - Non-zero status will cause the transaction to be rolled back and - the push, pull or unbundle will fail. URL that was source of - changes is in $HG_URL. + before accepting them. Passed the ID of the first new changeset in + $HG_NODE. Exit status 0 allows the transaction to commit. Non-zero + status will cause the transaction to be rolled back and the push, + pull or unbundle will fail. URL that was source of changes is in + $HG_URL. pretxncommit;; Run after a changeset has been created but the transaction not yet committed. Changeset is visible to hook program. This lets you @@ -518,43 +515,40 @@ Changeset ID of first new parent is in $HG_PARENT1. If merge, ID of second new parent is in $HG_PARENT2. tag;; - Run after a tag is created. ID of tagged changeset is in - $HG_NODE. Name of tag is in $HG_TAG. Tag is local if - $HG_LOCAL=1, in repo if $HG_LOCAL=0. + Run after a tag is created. ID of tagged changeset is in $HG_NODE. + Name of tag is in $HG_TAG. Tag is local if $HG_LOCAL=1, in repo if + $HG_LOCAL=0. update;; Run after updating the working directory. Changeset ID of first - new parent is in $HG_PARENT1. If merge, ID of second new parent - is in $HG_PARENT2. If the update succeeded, $HG_ERROR=0. If the + new parent is in $HG_PARENT1. If merge, ID of second new parent is + in $HG_PARENT2. If the update succeeded, $HG_ERROR=0. If the update failed (e.g. because conflicts not resolved), $HG_ERROR=1. - Note: it is generally better to use standard hooks rather - than the generic pre- and post- command hooks as they are - guaranteed to be called in the appropriate contexts for - influencing transactions. Also, hooks like "commit" will be - called in all contexts that generate a commit (e.g. tag) and - not just the commit command. + Note: it is generally better to use standard hooks rather than the + generic pre- and post- command hooks as they are guaranteed to be + called in the appropriate contexts for influencing transactions. + Also, hooks like "commit" will be called in all contexts that + generate a commit (e.g. tag) and not just the commit command. - Note2: Environment variables with empty values may not be - passed to hooks on platforms such as Windows. As an - example, $HG_PARENT2 will have an empty value under - Unix-like platforms for non-merge changesets, while it - will not be available at all under Windows. + Note2: Environment variables with empty values may not be passed to + hooks on platforms such as Windows. As an example, $HG_PARENT2 will + have an empty value under Unix-like platforms for non-merge + changesets, while it will not be available at all under Windows. The syntax for Python hooks is as follows: hookname = python:modulename.submodule.callable hookname = python:/path/to/python/module.py:callable - Python hooks are run within the Mercurial process. Each hook - is called with at least three keyword arguments: a ui object - (keyword "ui"), a repository object (keyword "repo"), and a - "hooktype" keyword that tells what kind of hook is used. - Arguments listed as environment variables above are passed as - keyword arguments, with no "HG_" prefix, and names in lower - case. + Python hooks are run within the Mercurial process. Each hook is + called with at least three keyword arguments: a ui object (keyword + "ui"), a repository object (keyword "repo"), and a "hooktype" + keyword that tells what kind of hook is used. Arguments listed as + environment variables above are passed as keyword arguments, with no + "HG_" prefix, and names in lower case. - If a Python hook returns a "true" value or raises an - exception, this is treated as a failure. + If a Python hook returns a "true" value or raises an exception, this + is treated as a failure. [[http_proxy]] http_proxy:: @@ -582,53 +576,53 @@ Optional. Whether to connect to mail server using TLS. True or False. Default: False. username;; - Optional. User name to authenticate to SMTP server with. - If username is specified, password must also be specified. + Optional. User name to authenticate to SMTP server with. If + username is specified, password must also be specified. Default: none. password;; - Optional. Password to authenticate to SMTP server with. - If username is specified, password must also be specified. + Optional. Password to authenticate to SMTP server with. If + username is specified, password must also be specified. Default: none. local_hostname;; - Optional. It's the hostname that the sender can use to identify itself - to the MTA. + Optional. It's the hostname that the sender can use to identify + itself to the MTA. [[paths]] paths:: Assigns symbolic names to repositories. The left side is the symbolic name, and the right gives the directory or URL that is the - location of the repository. Default paths can be declared by - setting the following entries. + location of the repository. Default paths can be declared by setting + the following entries. default;; Directory or URL to use when pulling if no source is specified. - Default is set to repository from which the current repository - was cloned. + Default is set to repository from which the current repository was + cloned. default-push;; Optional. Directory or URL to use when pushing if no destination is specified. [[profiling]] profiling:: - Specifies profiling format and file output. - In this section description, 'profiling data' stands for the raw data - collected during profiling, while 'profiling report' stands for a - statistical text report generated from the profiling data. - The profiling is done using lsprof. + Specifies profiling format and file output. In this section + description, 'profiling data' stands for the raw data collected + during profiling, while 'profiling report' stands for a statistical + text report generated from the profiling data. The profiling is done + using lsprof. format;; Profiling format. Default: text. text;; - Generate a profiling report. - When saving to a file, it should be noted that only the report is saved, - and the profiling data is not kept. + Generate a profiling report. When saving to a file, it should be + noted that only the report is saved, and the profiling data is + not kept. kcachegrind;; - Format profiling data for kcachegrind use: - when saving to a file, the generated file can directly be loaded - into kcachegrind. + Format profiling data for kcachegrind use: when saving to a + file, the generated file can directly be loaded into + kcachegrind. output;; - File path where profiling data or report should be saved. - If the file exists, it is replaced. - Default: None, data is printed on stderr + File path where profiling data or report should be saved. If the + file exists, it is replaced. Default: None, data is printed on + stderr [[server]] server:: @@ -645,15 +639,15 @@ [[trusted]] trusted:: - For security reasons, Mercurial will not use the settings in - the .hg/hgrc file from a repository if it doesn't belong to a - trusted user or to a trusted group. The main exception is the - web interface, which automatically uses some safe settings, since - it's common to serve repositories from different users. + For security reasons, Mercurial will not use the settings in the + .hg/hgrc file from a repository if it doesn't belong to a trusted + user or to a trusted group. The main exception is the web interface, + which automatically uses some safe settings, since it's common to + serve repositories from different users. This section specifies what users and groups are trusted. The - current user is always trusted. To trust everybody, list a user - or a group with name "*". + current user is always trusted. To trust everybody, list a user or a + group with name "*". users;; Comma-separated list of trusted users. @@ -665,13 +659,13 @@ User interface controls. archivemeta;; Whether to include the .hg_archival.txt file containing metadata - (hashes for the repository base and for tip) in archives created by - the hg archive command or downloaded via hgweb. + (hashes for the repository base and for tip) in archives created + by the hg archive command or downloaded via hgweb. Default is true. askusername;; Whether to prompt for a username when committing. If True, and neither $HGUSER nor $EMAIL has been specified, then the user will - be prompted to enter a username. If no username is entered, the + be prompted to enter a username. If no username is entered, the default USER@HOST is used instead. Default is False. debug;; @@ -682,10 +676,10 @@ Encoding to try if it's not possible to decode the changelog using UTF-8. Default is ISO-8859-1. ignore;; - A file to read per-user ignore patterns from. This file should be in - the same format as a repository-wide .hgignore file. This option - supports hook syntax, so if you want to specify multiple ignore - files, you can do so by setting something like + A file to read per-user ignore patterns from. This file should be + in the same format as a repository-wide .hgignore file. This + option supports hook syntax, so if you want to specify multiple + ignore files, you can do so by setting something like "ignore.other = ~/.hgignore2". For details of the ignore file format, see the hgignore(5) man page. interactive;; @@ -709,8 +703,8 @@ merge-tools section. patch;; - command to use to apply patches. Look for 'gpatch' or 'patch' in PATH if - unset. + command to use to apply patches. Look for 'gpatch' or 'patch' in + PATH if unset. quiet;; Reduce the amount of output printed. True or False. Default is False. remotecmd;; @@ -720,8 +714,9 @@ trusted user or group. True or False. Default is True. slash;; Display paths using a slash ("/") as the path separator. This only - makes a difference on systems where the default path separator is not - the slash character (e.g. Windows uses the backslash character ("\")). + makes a difference on systems where the default path separator is + not the slash character (e.g. Windows uses the backslash character + ("\")). Default is False. ssh;; command to use for SSH connections. Default is 'ssh'. @@ -736,10 +731,10 @@ username;; The committer of a changeset created when running "commit". Typically a person's name and email address, e.g. "Fred Widget - <fred@example.com>". Default is $EMAIL or username@hostname. - If the username in hgrc is empty, it has to be specified manually or - in a different hgrc file (e.g. $HOME/.hgrc, if the admin set "username =" - in the system hgrc). + <fred@example.com>". Default is $EMAIL or username@hostname. If + the username in hgrc is empty, it has to be specified manually or + in a different hgrc file (e.g. $HOME/.hgrc, if the admin set + "username =" in the system hgrc). verbose;; Increase the amount of output printed. True or False. Default is False. @@ -764,51 +759,55 @@ Whether to allow pulling from the repository. Default is true. allow_push;; Whether to allow pushing to the repository. If empty or not set, - push is not allowed. If the special value "*", any remote user - can push, including unauthenticated users. Otherwise, the remote - user must have been authenticated, and the authenticated user name - must be present in this list (separated by whitespace or ","). - The contents of the allow_push list are examined after the - deny_push list. + push is not allowed. If the special value "*", any remote user can + push, including unauthenticated users. Otherwise, the remote user + must have been authenticated, and the authenticated user name must + be present in this list (separated by whitespace or ","). The + contents of the allow_push list are examined after the deny_push + list. allow_read;; - If the user has not already been denied repository access due to the - contents of deny_read, this list determines whether to grant repository - access to the user. If this list is not empty, and the user is - unauthenticated or not present in the list (separated by whitespace or ","), - then access is denied for the user. If the list is empty or not set, then - access is permitted to all users by default. Setting allow_read to the - special value "*" is equivalent to it not being set (i.e. access is - permitted to all users). The contents of the allow_read list are examined - after the deny_read list. + If the user has not already been denied repository access due to + the contents of deny_read, this list determines whether to grant + repository access to the user. If this list is not empty, and the + user is unauthenticated or not present in the list (separated by + whitespace or ","), then access is denied for the user. If the + list is empty or not set, then access is permitted to all users by + default. Setting allow_read to the special value "*" is equivalent + to it not being set (i.e. access is permitted to all users). The + contents of the allow_read list are examined after the deny_read + list. allowzip;; (DEPRECATED) Whether to allow .zip downloading of repo revisions. Default is false. This feature creates temporary files. baseurl;; Base URL to use when publishing URLs in other locations, so - third-party tools like email notification hooks can construct URLs. - Example: "http://hgserver/repos/" + third-party tools like email notification hooks can construct + URLs. Example: "http://hgserver/repos/" contact;; Name or email address of the person in charge of the repository. Defaults to ui.username or $EMAIL or "unknown" if unset or empty. deny_push;; Whether to deny pushing to the repository. If empty or not set, - push is not denied. If the special value "*", all remote users - are denied push. Otherwise, unauthenticated users are all denied, - and any authenticated user name present in this list (separated by + push is not denied. If the special value "*", all remote users are + denied push. Otherwise, unauthenticated users are all denied, and + any authenticated user name present in this list (separated by whitespace or ",") is also denied. The contents of the deny_push list are examined before the allow_push list. deny_read;; - Whether to deny reading/viewing of the repository. If this list is not - empty, unauthenticated users are all denied, and any authenticated user name - present in this list (separated by whitespace or ",") is also denied access - to the repository. If set to the special value "*", all remote users are - denied access (rarely needed ;). If deny_read is empty or not set, the - determination of repository access depends on the presence and content of - the allow_read list (see description). If both deny_read and allow_read are - empty or not set, then access is permitted to all users by default. If the - repository is being served via hgwebdir, denied users will not be able to - see it in the list of repositories. The contents of the deny_read list have - priority over (are examined before) the contents of the allow_read list. + Whether to deny reading/viewing of the repository. If this list is + not empty, unauthenticated users are all denied, and any + authenticated user name present in this list (separated by + whitespace or ",") is also denied access to the repository. If set + to the special value "*", all remote users are denied access + (rarely needed ;). If deny_read is empty or not set, the + determination of repository access depends on the presence and + content of the allow_read list (see description). If both + deny_read and allow_read are empty or not set, then access is + permitted to all users by default. If the repository is being + served via hgwebdir, denied users will not be able to see it in + the list of repositories. The contents of the deny_read list have + priority over (are examined before) the contents of the allow_read + list. description;; Textual description of the repository's purpose or contents. Default is "unknown". @@ -818,7 +817,8 @@ errorlog;; Where to output the error log. Default is stderr. hidden;; - Whether to hide the repository in the hgwebdir index. Default is false. + Whether to hide the repository in the hgwebdir index. + Default is false. ipv6;; Whether to use IPv6. Default is false. name;; @@ -836,9 +836,9 @@ Whether to require that inbound pushes be transported over SSL to prevent password sniffing. Default is true. staticurl;; - Base URL to use for static files. If unset, static files (e.g. - the hgicon.png favicon) will be served by the CGI script itself. - Use this setting to serve them directly with the HTTP server. + Base URL to use for static files. If unset, static files (e.g. the + hgicon.png favicon) will be served by the CGI script itself. Use + this setting to serve them directly with the HTTP server. Example: "http://hgserver/static/" stripes;; How many lines a "zebra stripe" should span in multiline output.