--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/i18n/ru.po Mon May 30 12:20:36 2011 +0200
@@ -0,0 +1,14238 @@
+# Russian translations for Mercurial package.
+# Copyright (C) 2011 Matt Mackall <mpm@selenic.com> and others
+# This file is distributed under the same license as the Mercurial package.
+# Alexander Sauta <demosito@gmail.com>, 2011.
+msgid ""
+msgstr ""
+"Project-Id-Version: Mercurial\n"
+"Report-Msgid-Bugs-To: <mercurial-devel@selenic.com>\n"
+"POT-Creation-Date: 2011-05-29 01:27+0400\n"
+"PO-Revision-Date: 2011-05-12 23:48+0400\n"
+"Last-Translator: Alexander Sauta <demosito@gmail.com>\n"
+"Language-Team: Russian\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#, python-format
+msgid " (default: %s)"
+msgstr " (по умолчанию: %s)"
+
+msgid "Options"
+msgstr "Настройки"
+
+msgid "Commands"
+msgstr "Команды"
+
+msgid "Extensions"
+msgstr "Расширения"
+
+msgid ""
+"This section contains help for extensions that are distributed together with "
+"Mercurial. Help for other extensions is available in the help system."
+msgstr ""
+"Этот раздел содержит справку по расширениям, включенным в стандартную "
+"комплектацию Mercurial. Справка по другим расширениям может быть получена в "
+"справочной системе."
+
+msgid "Options:"
+msgstr "Параметры:"
+
+#, python-format
+msgid " aliases: %s"
+msgstr " псевдонимы: %s"
+
+msgid "hooks for controlling repository access"
+msgstr "Хуки для контроля доступа к репозиторию"
+
+msgid ""
+"This hook makes it possible to allow or deny write access to given\n"
+"branches and paths of a repository when receiving incoming changesets\n"
+"via pretxnchangegroup and pretxncommit."
+msgstr ""
+
+msgid ""
+"The authorization is matched based on the local user name on the\n"
+"system where the hook runs, and not the committer of the original\n"
+"changeset (since the latter is merely informative)."
+msgstr ""
+
+msgid ""
+"The acl hook is best used along with a restricted shell like hgsh,\n"
+"preventing authenticating users from doing anything other than pushing\n"
+"or pulling. The hook is not safe to use if users have interactive\n"
+"shell access, as they can then disable the hook. Nor is it safe if\n"
+"remote users share an account, because then there is no way to\n"
+"distinguish them."
+msgstr ""
+
+msgid "The order in which access checks are performed is:"
+msgstr ""
+
+msgid ""
+"1) Deny list for branches (section ``acl.deny.branches``)\n"
+"2) Allow list for branches (section ``acl.allow.branches``)\n"
+"3) Deny list for paths (section ``acl.deny``)\n"
+"4) Allow list for paths (section ``acl.allow``)"
+msgstr ""
+
+msgid "The allow and deny sections take key-value pairs."
+msgstr ""
+
+msgid ""
+"Branch-based Access Control\n"
+"..........................."
+msgstr ""
+
+msgid ""
+"Use the ``acl.deny.branches`` and ``acl.allow.branches`` sections to\n"
+"have branch-based access control. Keys in these sections can be\n"
+"either:"
+msgstr ""
+
+msgid ""
+"- a branch name, or\n"
+"- an asterisk, to match any branch;"
+msgstr ""
+
+msgid "The corresponding values can be either:"
+msgstr ""
+
+msgid ""
+"- a comma-separated list containing users and groups, or\n"
+"- an asterisk, to match anyone;"
+msgstr ""
+
+msgid ""
+"Path-based Access Control\n"
+"........................."
+msgstr ""
+
+msgid ""
+"Use the ``acl.deny`` and ``acl.allow`` sections to have path-based\n"
+"access control. Keys in these sections accept a subtree pattern (with\n"
+"a glob syntax by default). The corresponding values follow the same\n"
+"syntax as the other sections above."
+msgstr ""
+
+msgid ""
+"Groups\n"
+"......"
+msgstr ""
+
+msgid ""
+"Group names must be prefixed with an ``@`` symbol. Specifying a group\n"
+"name has the same effect as specifying all the users in that group."
+msgstr ""
+
+msgid ""
+"You can define group members in the ``acl.groups`` section.\n"
+"If a group name is not defined there, and Mercurial is running under\n"
+"a Unix-like system, the list of users will be taken from the OS.\n"
+"Otherwise, an exception will be raised."
+msgstr ""
+
+msgid ""
+"Example Configuration\n"
+"....................."
+msgstr ""
+
+msgid "::"
+msgstr ""
+
+msgid " [hooks]"
+msgstr ""
+
+msgid ""
+" # Use this if you want to check access restrictions at commit time\n"
+" pretxncommit.acl = python:hgext.acl.hook"
+msgstr ""
+
+msgid ""
+" # Use this if you want to check access restrictions for pull, push,\n"
+" # bundle and serve.\n"
+" pretxnchangegroup.acl = python:hgext.acl.hook"
+msgstr ""
+
+msgid ""
+" [acl]\n"
+" # Allow or deny access for incoming changes only if their source is\n"
+" # listed here, let them pass otherwise. Source is \"serve\" for all\n"
+" # remote access (http or ssh), \"push\", \"pull\" or \"bundle\" when the\n"
+" # related commands are run locally.\n"
+" # Default: serve\n"
+" sources = serve"
+msgstr ""
+
+msgid " [acl.deny.branches]"
+msgstr ""
+
+msgid ""
+" # Everyone is denied to the frozen branch:\n"
+" frozen-branch = *"
+msgstr ""
+
+msgid ""
+" # A bad user is denied on all branches:\n"
+" * = bad-user"
+msgstr ""
+
+msgid " [acl.allow.branches]"
+msgstr ""
+
+msgid ""
+" # A few users are allowed on branch-a:\n"
+" branch-a = user-1, user-2, user-3"
+msgstr ""
+
+msgid ""
+" # Only one user is allowed on branch-b:\n"
+" branch-b = user-1"
+msgstr ""
+
+msgid ""
+" # The super user is allowed on any branch:\n"
+" * = super-user"
+msgstr ""
+
+msgid ""
+" # Everyone is allowed on branch-for-tests:\n"
+" branch-for-tests = *"
+msgstr ""
+
+msgid ""
+" [acl.deny]\n"
+" # This list is checked first. If a match is found, acl.allow is not\n"
+" # checked. All users are granted access if acl.deny is not present.\n"
+" # Format for both lists: glob pattern = user, ..., @group, ..."
+msgstr ""
+
+msgid ""
+" # To match everyone, use an asterisk for the user:\n"
+" # my/glob/pattern = *"
+msgstr ""
+
+msgid ""
+" # user6 will not have write access to any file:\n"
+" ** = user6"
+msgstr ""
+
+msgid ""
+" # Group \"hg-denied\" will not have write access to any file:\n"
+" ** = @hg-denied"
+msgstr ""
+
+msgid ""
+" # Nobody will be able to change \"DONT-TOUCH-THIS.txt\", despite\n"
+" # everyone being able to change all other files. See below.\n"
+" src/main/resources/DONT-TOUCH-THIS.txt = *"
+msgstr ""
+
+msgid ""
+" [acl.allow]\n"
+" # if acl.allow is not present, all users are allowed by default\n"
+" # empty acl.allow = no users allowed"
+msgstr ""
+
+msgid ""
+" # User \"doc_writer\" has write access to any file under the \"docs\"\n"
+" # folder:\n"
+" docs/** = doc_writer"
+msgstr ""
+
+msgid ""
+" # User \"jack\" and group \"designers\" have write access to any file\n"
+" # under the \"images\" folder:\n"
+" images/** = jack, @designers"
+msgstr ""
+
+msgid ""
+" # Everyone (except for \"user6\" - see acl.deny above) will have write\n"
+" # access to any file under the \"resources\" folder (except for 1\n"
+" # file. See acl.deny):\n"
+" src/main/resources/** = *"
+msgstr ""
+
+msgid " .hgtags = release_engineer"
+msgstr ""
+
+#, python-format
+msgid "group '%s' is undefined"
+msgstr ""
+
+#, python-format
+msgid ""
+"config error - hook type \"%s\" cannot stop incoming changesets nor commits"
+msgstr ""
+
+#, python-format
+msgid "acl: user \"%s\" denied on branch \"%s\" (changeset \"%s\")"
+msgstr ""
+
+#, python-format
+msgid "acl: user \"%s\" not allowed on branch \"%s\" (changeset \"%s\")"
+msgstr ""
+
+#, python-format
+msgid "acl: access denied for changeset %s"
+msgstr ""
+
+msgid "hooks for integrating with the Bugzilla bug tracker"
+msgstr ""
+
+msgid ""
+"This hook extension adds comments on bugs in Bugzilla when changesets\n"
+"that refer to bugs by Bugzilla ID are seen. The comment is formatted using\n"
+"the Mercurial template mechanism."
+msgstr ""
+
+msgid "The hook does not change bug status."
+msgstr ""
+
+msgid "Three basic modes of access to Bugzilla are provided:"
+msgstr ""
+
+msgid ""
+"1. Access via the Bugzilla XMLRPC interface. Requires Bugzilla 3.4 or later."
+msgstr ""
+
+msgid ""
+"2. Check data via the Bugzilla XMLRPC interface and submit bug change\n"
+" via email to Bugzilla email interface. Requires Bugzilla 3.4 or later."
+msgstr ""
+
+msgid ""
+"3. Writing directly to the Bugzilla database. Only Bugzilla installations\n"
+" using MySQL are supported. Requires Python MySQLdb."
+msgstr ""
+
+msgid ""
+"Writing directly to the database is susceptible to schema changes, and\n"
+"relies on a Bugzilla contrib script to send out bug change\n"
+"notification emails. This script runs as the user running Mercurial,\n"
+"must be run on the host with the Bugzilla install, and requires\n"
+"permission to read Bugzilla configuration details and the necessary\n"
+"MySQL user and password to have full access rights to the Bugzilla\n"
+"database. For these reasons this access mode is now considered\n"
+"deprecated, and will not be updated for new Bugzilla versions going\n"
+"forward."
+msgstr ""
+
+msgid ""
+"Access via XMLRPC needs a Bugzilla username and password to be specified\n"
+"in the configuration. Comments are added under that username. Since the\n"
+"configuration must be readable by all Mercurial users, it is recommended\n"
+"that the rights of that user are restricted in Bugzilla to the minimum\n"
+"necessary to add comments."
+msgstr ""
+
+msgid ""
+"Access via XMLRPC/email uses XMLRPC to query Bugzilla, but sends\n"
+"email to the Bugzilla email interface to submit comments to bugs.\n"
+"The From: address in the email is set to the email address of the Mercurial\n"
+"user, so the comment appears to come from the Mercurial user. In the event\n"
+"that the Mercurial user email is not recognised by Bugzilla as a Bugzilla\n"
+"user, the email associated with the Bugzilla username used to log into\n"
+"Bugzilla is used instead as the source of the comment."
+msgstr ""
+
+msgid "Configuration items common to all access modes:"
+msgstr ""
+
+msgid ""
+"bugzilla.version\n"
+" This access type to use. Values recognised are:"
+msgstr ""
+
+msgid ""
+" :``xmlrpc``: Bugzilla XMLRPC interface.\n"
+" :``xmlrpc+email``: Bugzilla XMLRPC and email interfaces.\n"
+" :``3.0``: MySQL access, Bugzilla 3.0 and later.\n"
+" :``2.18``: MySQL access, Bugzilla 2.18 and up to but not\n"
+" including 3.0.\n"
+" :``2.16``: MySQL access, Bugzilla 2.16 and up to but not\n"
+" including 2.18."
+msgstr ""
+
+msgid ""
+"bugzilla.regexp\n"
+" Regular expression to match bug IDs in changeset commit message.\n"
+" Must contain one \"()\" group. The default expression matches ``Bug\n"
+" 1234``, ``Bug no. 1234``, ``Bug number 1234``, ``Bugs 1234,5678``,\n"
+" ``Bug 1234 and 5678`` and variations thereof. Matching is case\n"
+" insensitive."
+msgstr ""
+
+msgid ""
+"bugzilla.style\n"
+" The style file to use when formatting comments."
+msgstr ""
+
+msgid ""
+"bugzilla.template\n"
+" Template to use when formatting comments. Overrides style if\n"
+" specified. In addition to the usual Mercurial keywords, the\n"
+" extension specifies:"
+msgstr ""
+
+msgid ""
+" :``{bug}``: The Bugzilla bug ID.\n"
+" :``{root}``: The full pathname of the Mercurial repository.\n"
+" :``{webroot}``: Stripped pathname of the Mercurial repository.\n"
+" :``{hgweb}``: Base URL for browsing Mercurial repositories."
+msgstr ""
+
+msgid ""
+" Default ``changeset {node|short} in repo {root} refers to bug\n"
+" {bug}.\\ndetails:\\n\\t{desc|tabindent}``"
+msgstr ""
+
+msgid ""
+"bugzilla.strip\n"
+" The number of path separator characters to strip from the front of\n"
+" the Mercurial repository path (``{root}`` in templates) to produce\n"
+" ``{webroot}``. For example, a repository with ``{root}``\n"
+" ``/var/local/my-project`` with a strip of 2 gives a value for\n"
+" ``{webroot}`` of ``my-project``. Default 0."
+msgstr ""
+
+msgid ""
+"web.baseurl\n"
+" Base URL for browsing Mercurial repositories. Referenced from\n"
+" templates as ``{hgweb}``."
+msgstr ""
+
+msgid "Configuration items common to XMLRPC+email and MySQL access modes:"
+msgstr ""
+
+msgid ""
+"bugzilla.usermap\n"
+" Path of file containing Mercurial committer email to Bugzilla user email\n"
+" mappings. If specified, the file should contain one mapping per\n"
+" line::"
+msgstr ""
+
+msgid " committer = Bugzilla user"
+msgstr ""
+
+msgid " See also the ``[usermap]`` section."
+msgstr ""
+
+msgid ""
+"The ``[usermap]`` section is used to specify mappings of Mercurial\n"
+"committer email to Bugzilla user email. See also ``bugzilla.usermap``.\n"
+"Contains entries of the form ``committer = Bugzilla user``."
+msgstr ""
+
+msgid "XMLRPC access mode configuration:"
+msgstr ""
+
+msgid ""
+"bugzilla.bzurl\n"
+" The base URL for the Bugzilla installation.\n"
+" Default ``http://localhost/bugzilla``."
+msgstr ""
+
+msgid ""
+"bugzilla.user\n"
+" The username to use to log into Bugzilla via XMLRPC. Default\n"
+" ``bugs``."
+msgstr ""
+
+msgid ""
+"bugzilla.password\n"
+" The password for Bugzilla login."
+msgstr ""
+
+msgid ""
+"XMLRPC+email access mode uses the XMLRPC access mode configuration items,\n"
+"and also:"
+msgstr ""
+
+msgid ""
+"bugzilla.bzemail\n"
+" The Bugzilla email address."
+msgstr ""
+
+msgid ""
+"In addition, the Mercurial email settings must be configured. See the\n"
+"documentation in hgrc(5), sections ``[email]`` and ``[smtp]``."
+msgstr ""
+
+msgid "MySQL access mode configuration:"
+msgstr ""
+
+msgid ""
+"bugzilla.host\n"
+" Hostname of the MySQL server holding the Bugzilla database.\n"
+" Default ``localhost``."
+msgstr ""
+
+msgid ""
+"bugzilla.db\n"
+" Name of the Bugzilla database in MySQL. Default ``bugs``."
+msgstr ""
+
+msgid ""
+"bugzilla.user\n"
+" Username to use to access MySQL server. Default ``bugs``."
+msgstr ""
+
+msgid ""
+"bugzilla.password\n"
+" Password to use to access MySQL server."
+msgstr ""
+
+msgid ""
+"bugzilla.timeout\n"
+" Database connection timeout (seconds). Default 5."
+msgstr ""
+
+msgid ""
+"bugzilla.bzuser\n"
+" Fallback Bugzilla user name to record comments with, if changeset\n"
+" committer cannot be found as a Bugzilla user."
+msgstr ""
+
+msgid ""
+"bugzilla.bzdir\n"
+" Bugzilla install directory. Used by default notify. Default\n"
+" ``/var/www/html/bugzilla``."
+msgstr ""
+
+msgid ""
+"bugzilla.notify\n"
+" The command to run to get Bugzilla to send bug change notification\n"
+" emails. Substitutes from a map with 3 keys, ``bzdir``, ``id`` (bug\n"
+" id) and ``user`` (committer bugzilla email). Default depends on\n"
+" version; from 2.18 it is \"cd %(bzdir)s && perl -T\n"
+" contrib/sendbugmail.pl %(id)s %(user)s\"."
+msgstr ""
+
+msgid "Activating the extension::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" bugzilla ="
+msgstr ""
+
+msgid ""
+" [hooks]\n"
+" # run bugzilla hook on every change pulled or pushed in here\n"
+" incoming.bugzilla = python:hgext.bugzilla.hook"
+msgstr ""
+
+msgid "Example configurations:"
+msgstr ""
+
+msgid ""
+"XMLRPC example configuration. This uses the Bugzilla at\n"
+"``http://my-project.org/bugzilla``, logging in as user\n"
+"``bugmail@my-project.org`` with password ``plugh``. It is used with a\n"
+"collection of Mercurial repositories in ``/var/local/hg/repos/``,\n"
+"with a web interface at ``http://my-project.org/hg``. ::"
+msgstr ""
+
+msgid ""
+" [bugzilla]\n"
+" bzurl=http://my-project.org/bugzilla\n"
+" user=bugmail@my-project.org\n"
+" password=plugh\n"
+" version=xmlrpc\n"
+" template=Changeset {node|short} in {root|basename}.\n"
+" {hgweb}/{webroot}/rev/{node|short}\\n\n"
+" {desc}\\n\n"
+" strip=5"
+msgstr ""
+
+msgid ""
+" [web]\n"
+" baseurl=http://my-project.org/hg"
+msgstr ""
+
+msgid ""
+"XMLRPC+email example configuration. This uses the Bugzilla at\n"
+"``http://my-project.org/bugzilla``, logging in as user\n"
+"``bugmail@my-project.org`` wityh password ``plugh``. It is used with a\n"
+"collection of Mercurial repositories in ``/var/local/hg/repos/``,\n"
+"with a web interface at ``http://my-project.org/hg``. Bug comments\n"
+"are sent to the Bugzilla email address\n"
+"``bugzilla@my-project.org``. ::"
+msgstr ""
+
+msgid ""
+" [bugzilla]\n"
+" bzurl=http://my-project.org/bugzilla\n"
+" user=bugmail@my-project.org\n"
+" password=plugh\n"
+" version=xmlrpc\n"
+" bzemail=bugzilla@my-project.org\n"
+" template=Changeset {node|short} in {root|basename}.\n"
+" {hgweb}/{webroot}/rev/{node|short}\\n\n"
+" {desc}\\n\n"
+" strip=5"
+msgstr ""
+
+msgid ""
+" [usermap]\n"
+" user@emaildomain.com=user.name@bugzilladomain.com"
+msgstr ""
+
+msgid ""
+"MySQL example configuration. This has a local Bugzilla 3.2 installation\n"
+"in ``/opt/bugzilla-3.2``. The MySQL database is on ``localhost``,\n"
+"the Bugzilla database name is ``bugs`` and MySQL is\n"
+"accessed with MySQL username ``bugs`` password ``XYZZY``. It is used\n"
+"with a collection of Mercurial repositories in ``/var/local/hg/repos/``,\n"
+"with a web interface at ``http://my-project.org/hg``. ::"
+msgstr ""
+
+msgid ""
+" [bugzilla]\n"
+" host=localhost\n"
+" password=XYZZY\n"
+" version=3.0\n"
+" bzuser=unknown@domain.com\n"
+" bzdir=/opt/bugzilla-3.2\n"
+" template=Changeset {node|short} in {root|basename}.\n"
+" {hgweb}/{webroot}/rev/{node|short}\\n\n"
+" {desc}\\n\n"
+" strip=5"
+msgstr ""
+
+msgid "All the above add a comment to the Bugzilla bug record of the form::"
+msgstr ""
+
+msgid ""
+" Changeset 3b16791d6642 in repository-name.\n"
+" http://my-project.org/hg/repository-name/rev/3b16791d6642"
+msgstr ""
+
+msgid " Changeset commit comment. Bug 1234.\n"
+msgstr ""
+
+#, python-format
+msgid "python mysql support not available: %s"
+msgstr ""
+
+#, python-format
+msgid "connecting to %s:%s as %s, password %s\n"
+msgstr ""
+
+#, python-format
+msgid "query: %s %s\n"
+msgstr ""
+
+#, python-format
+msgid "failed query: %s %s\n"
+msgstr ""
+
+msgid "unknown database schema"
+msgstr ""
+
+#, python-format
+msgid "bug %d already knows about changeset %s\n"
+msgstr ""
+
+msgid "telling bugzilla to send mail:\n"
+msgstr ""
+
+#, python-format
+msgid " bug %s\n"
+msgstr ""
+
+#, python-format
+msgid "running notify command %s\n"
+msgstr ""
+
+#, python-format
+msgid "bugzilla notify command %s"
+msgstr ""
+
+msgid "done\n"
+msgstr ""
+
+#, python-format
+msgid "looking up user %s\n"
+msgstr ""
+
+#, python-format
+msgid "cannot find bugzilla user id for %s"
+msgstr ""
+
+#, python-format
+msgid "cannot find bugzilla user id for %s or %s"
+msgstr ""
+
+msgid "configuration 'bzemail' missing"
+msgstr ""
+
+#, python-format
+msgid "default bugzilla user %s email not found"
+msgstr ""
+
+#, python-format
+msgid "bugzilla version %s not supported"
+msgstr ""
+
+msgid ""
+"changeset {node|short} in repo {root} refers to bug {bug}.\n"
+"details:\n"
+"\t{desc|tabindent}"
+msgstr ""
+
+#, python-format
+msgid "hook type %s does not pass a changeset id"
+msgstr ""
+
+#, python-format
+msgid "Bugzilla error: %s"
+msgstr ""
+
+msgid "command to display child changesets"
+msgstr "Команда для отображения дочерних наборов изменений"
+
+msgid "show the children of the given or working directory revision"
+msgstr ""
+"показать дочерние ревизии для заданной текущей ревизии рабочего каталога"
+
+msgid ""
+" Print the children of the working directory's revisions. If a\n"
+" revision is given via -r/--rev, the children of that revision will\n"
+" be printed. If a file argument is given, revision in which the\n"
+" file was last changed (after the working directory revision or the\n"
+" argument to --rev if given) is printed.\n"
+" "
+msgstr ""
+
+msgid "REV"
+msgstr "РЕВИЗИЯ"
+
+msgid "show children of the specified revision"
+msgstr "показать дочерние наборы изменений для указанной ревизии"
+
+msgid "hg children [-r REV] [FILE]"
+msgstr ""
+
+msgid "command to display statistics about repository history"
+msgstr ""
+
+#, python-format
+msgid "Revision %d is a merge, ignoring...\n"
+msgstr ""
+
+msgid "analyzing"
+msgstr ""
+
+msgid "histogram of changes to the repository"
+msgstr ""
+
+msgid ""
+" This command will display a histogram representing the number\n"
+" of changed lines or revisions, grouped according to the given\n"
+" template. The default template will group changes by author.\n"
+" The --dateformat option may be used to group the results by\n"
+" date instead."
+msgstr ""
+
+msgid ""
+" Statistics are based on the number of changed lines, or\n"
+" alternatively the number of matching revisions if the\n"
+" --changesets option is specified."
+msgstr ""
+
+msgid " Examples::"
+msgstr ""
+
+msgid ""
+" # display count of changed lines for every committer\n"
+" hg churn -t '{author|email}'"
+msgstr ""
+
+msgid ""
+" # display daily activity graph\n"
+" hg churn -f '%H' -s -c"
+msgstr ""
+
+msgid ""
+" # display activity of developers by month\n"
+" hg churn -f '%Y-%m' -s -c"
+msgstr ""
+
+msgid ""
+" # display count of lines changed in every year\n"
+" hg churn -f '%Y' -s"
+msgstr ""
+
+msgid ""
+" It is possible to map alternate email addresses to a main address\n"
+" by providing a file using the following format::"
+msgstr ""
+
+msgid " <alias email> = <actual email>"
+msgstr ""
+
+msgid ""
+" Such a file may be specified with the --aliases option, otherwise\n"
+" a .hgchurn file will be looked for in the working directory root.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "skipping malformed alias: %s\n"
+msgstr ""
+
+msgid "count rate for the specified revision or range"
+msgstr ""
+
+msgid "DATE"
+msgstr "ДАТА"
+
+msgid "count rate for revisions matching date spec"
+msgstr ""
+
+msgid "TEMPLATE"
+msgstr ""
+
+msgid "template to group changesets"
+msgstr ""
+
+msgid "FORMAT"
+msgstr "ФОРМАТ"
+
+msgid "strftime-compatible format for grouping by date"
+msgstr ""
+
+msgid "count rate by number of changesets"
+msgstr ""
+
+msgid "sort by key (default: sort by count)"
+msgstr ""
+
+msgid "display added/removed lines separately"
+msgstr ""
+
+msgid "FILE"
+msgstr "ФАЙЛ"
+
+msgid "file with email aliases"
+msgstr ""
+
+msgid "hg churn [-d DATE] [-r REV] [--aliases FILE] [FILE]"
+msgstr ""
+
+msgid "colorize output from some commands"
+msgstr "Раскрашивает вывод некоторых команд"
+
+msgid ""
+"This extension modifies the status and resolve commands to add color\n"
+"to their output to reflect file status, the qseries command to add\n"
+"color to reflect patch status (applied, unapplied, missing), and to\n"
+"diff-related commands to highlight additions, removals, diff headers,\n"
+"and trailing whitespace."
+msgstr ""
+
+msgid ""
+"Other effects in addition to color, like bold and underlined text, are\n"
+"also available. By default, the terminfo database is used to find the\n"
+"terminal codes used to change color and effect. If terminfo is not\n"
+"available, then effects are rendered with the ECMA-48 SGR control\n"
+"function (aka ANSI escape codes)."
+msgstr ""
+
+msgid "Default effects may be overridden from your configuration file::"
+msgstr ""
+
+msgid ""
+" [color]\n"
+" status.modified = blue bold underline red_background\n"
+" status.added = green bold\n"
+" status.removed = red bold blue_background\n"
+" status.deleted = cyan bold underline\n"
+" status.unknown = magenta bold underline\n"
+" status.ignored = black bold"
+msgstr ""
+
+msgid ""
+" # 'none' turns off all effects\n"
+" status.clean = none\n"
+" status.copied = none"
+msgstr ""
+
+msgid ""
+" qseries.applied = blue bold underline\n"
+" qseries.unapplied = black bold\n"
+" qseries.missing = red bold"
+msgstr ""
+
+msgid ""
+" diff.diffline = bold\n"
+" diff.extended = cyan bold\n"
+" diff.file_a = red bold\n"
+" diff.file_b = green bold\n"
+" diff.hunk = magenta\n"
+" diff.deleted = red\n"
+" diff.inserted = green\n"
+" diff.changed = white\n"
+" diff.trailingwhitespace = bold red_background"
+msgstr ""
+
+msgid ""
+" resolve.unresolved = red bold\n"
+" resolve.resolved = green bold"
+msgstr ""
+
+msgid " bookmarks.current = green"
+msgstr ""
+
+msgid ""
+" branches.active = none\n"
+" branches.closed = black bold\n"
+" branches.current = green\n"
+" branches.inactive = none"
+msgstr ""
+
+msgid ""
+"The available effects in terminfo mode are 'blink', 'bold', 'dim',\n"
+"'inverse', 'invisible', 'italic', 'standout', and 'underline'; in\n"
+"ECMA-48 mode, the options are 'bold', 'inverse', 'italic', and\n"
+"'underline'. How each is rendered depends on the terminal emulator.\n"
+"Some may not be available for a given terminal type, and will be\n"
+"silently ignored."
+msgstr ""
+
+msgid ""
+"Because there are only eight standard colors, this module allows you\n"
+"to define color names for other color slots which might be available\n"
+"for your terminal type, assuming terminfo mode. For instance::"
+msgstr ""
+
+msgid ""
+" color.brightblue = 12\n"
+" color.pink = 207\n"
+" color.orange = 202"
+msgstr ""
+
+msgid ""
+"to set 'brightblue' to color slot 12 (useful for 16 color terminals\n"
+"that have brighter colors defined in the upper eight) and, 'pink' and\n"
+"'orange' to colors in 256-color xterm's default color cube. These\n"
+"defined colors may then be used as any of the pre-defined eight,\n"
+"including appending '_background' to set the background to that color."
+msgstr ""
+
+msgid ""
+"The color extension will try to detect whether to use terminfo, ANSI\n"
+"codes or Win32 console APIs, unless it is made explicit; e.g.::"
+msgstr ""
+
+msgid ""
+" [color]\n"
+" mode = ansi"
+msgstr ""
+
+msgid ""
+"Any value other than 'ansi', 'win32', 'terminfo', or 'auto' will\n"
+"disable color."
+msgstr ""
+
+msgid "no terminfo entry for setab/setaf: reverting to ECMA-48 color\n"
+msgstr ""
+
+#, python-format
+msgid "ignoring unknown color/effect %r (configured in color.%s)\n"
+msgstr ""
+
+#, python-format
+msgid "warning: failed to set color mode to %s\n"
+msgstr ""
+
+#. i18n: 'always', 'auto', and 'never' are keywords and should
+#. not be translated
+msgid "when to colorize (boolean, always, auto, or never)"
+msgstr ""
+
+msgid "TYPE"
+msgstr "ТИП"
+
+msgid "import revisions from foreign VCS repositories into Mercurial"
+msgstr ""
+"импортирует ревизии из репозиториев других систем контроля версий в Mercurial"
+
+msgid "convert a foreign SCM repository to a Mercurial one."
+msgstr "Преобразовать репозиторий другой SCM в репозиторий Mercurial"
+
+msgid " Accepted source formats [identifiers]:"
+msgstr " Возможные входные форматы [идентификаторы]:"
+
+msgid ""
+" - Mercurial [hg]\n"
+" - CVS [cvs]\n"
+" - Darcs [darcs]\n"
+" - git [git]\n"
+" - Subversion [svn]\n"
+" - Monotone [mtn]\n"
+" - GNU Arch [gnuarch]\n"
+" - Bazaar [bzr]\n"
+" - Perforce [p4]"
+msgstr ""
+
+msgid " Accepted destination formats [identifiers]:"
+msgstr " Возможные выходные форматы [идентификаторы]:"
+
+msgid ""
+" - Mercurial [hg]\n"
+" - Subversion [svn] (history on branches is not preserved)"
+msgstr ""
+" - Mercurial [hg]\n"
+" - Subversion [svn] (история на ветках не сохраняется)"
+
+msgid ""
+" If no revision is given, all revisions will be converted.\n"
+" Otherwise, convert will only import up to the named revision\n"
+" (given in a format understood by the source)."
+msgstr ""
+" Если номер ревизии не указан, преобразуются все ревизии.\n"
+" В противном случае будут преобразованы только ревизии,\n"
+" предшествующие указанной. Номер ревизии указывается в формате\n"
+" источника."
+
+# BAIK
+msgid ""
+" If no destination directory name is specified, it defaults to the\n"
+" basename of the source with ``-hg`` appended. If the destination\n"
+" repository doesn't exist, it will be created."
+msgstr ""
+" Если не указан каталог назначения, то будет использовано имя\n"
+" каталога источника с добавленным окончанием ``-hg``. Если каталог\n"
+" назначения не существует, он будет создан."
+
+msgid ""
+" By default, all sources except Mercurial will use --branchsort.\n"
+" Mercurial uses --sourcesort to preserve original revision numbers\n"
+" order. Sort modes have the following effects:"
+msgstr ""
+" По умолчанию все источники кроме Mercurial преобразуются с\n"
+" параметром --branchsort. Для репозитория Mercurial используется\n"
+" --sourcesort, чтобы сохранить исходный порядок номеров ревизий.\n"
+" Режимы сортировки имеют следующий смысл:"
+
+msgid ""
+" --branchsort convert from parent to child revision when possible,\n"
+" which means branches are usually converted one after\n"
+" the other. It generates more compact repositories."
+msgstr ""
+" --branchsort по возможности преобразует от родительской к\n"
+" дочерней ревизии, т.е. ветви обычно ковертируются\n"
+" одна за другой. Позволяет генерировать более\n"
+" компактные репозитории."
+
+msgid ""
+" --datesort sort revisions by date. Converted repositories have\n"
+" good-looking changelogs but are often an order of\n"
+" magnitude larger than the same ones generated by\n"
+" --branchsort."
+msgstr ""
+" -datesort сортирует ревизии по дате. Сконвертированные\n"
+" репозитории имеют правильно выглядящую историю,\n"
+" но часто получаются на порядок больше по сравнению\n"
+" c --branchsort."
+
+msgid ""
+" --sourcesort try to preserve source revisions order, only\n"
+" supported by Mercurial sources."
+msgstr ""
+" --sourcesort пытается сохранить исходный порядок ревизий.\n"
+" Только для исходных репозиториев Mercurial"
+
+#, fuzzy
+msgid ""
+" If ``REVMAP`` isn't given, it will be put in a default location\n"
+" (``<dest>/.hg/shamap`` by default). The ``REVMAP`` is a simple\n"
+" text file that maps each source commit ID to the destination ID\n"
+" for that revision, like so::"
+msgstr ""
+" Если файл ``REVMAP`` не задан, он будет создан по умолчанию\n"
+" как ``<dest>/.hg/shamap``. ``REVMAP`` - это простой текстовый\n"
+" файл который устанавливает соответсвие входных и выходных\n"
+" идентификаторов для каждой ревизии в формате:"
+
+msgid " <source ID> <destination ID>"
+msgstr " <входной идентификатор> <выходной идентификатор>"
+
+msgid ""
+" If the file doesn't exist, it's automatically created. It's\n"
+" updated on each commit copied, so :hg:`convert` can be interrupted\n"
+" and can be run repeatedly to copy new commits."
+msgstr ""
+" Если файл не существует, он создается автоматически. Он\n"
+" обновляется на каждом копируемом коммите, так что :hg: `convert`\n"
+" может быть прервано и повторно запущено для копирования новых\n"
+" коммитов"
+
+msgid ""
+" The authormap is a simple text file that maps each source commit\n"
+" author to a destination commit author. It is handy for source SCMs\n"
+" that use unix logins to identify authors (eg: CVS). One line per\n"
+" author mapping and the line format is::"
+msgstr ""
+" authormap - это обычный текстовый файл, который позволяет \n"
+" заменить в конечном репозитории имена авторов коммитов из \n"
+" исходного. Это удобно в случае исходной SCM, которая использует \n"
+" unix-логины в качестве имен авторов (например, CVS). Каждая \n"
+" строка соответсвует одному имени. Формат строки::"
+
+msgid " source author = destination author"
+msgstr " автор в источнике = автор на выходе"
+
+#, fuzzy
+msgid " Empty lines and lines starting with a ``#`` are ignored."
+msgstr " Пустые строки и строки, начинающиеся с ``#`` игнорируются\n"
+
+msgid ""
+" The filemap is a file that allows filtering and remapping of files\n"
+" and directories. Each line can contain one of the following\n"
+" directives::"
+msgstr ""
+" Файл filemap позволяет фильтровать и переименовывать\n"
+" файлы и каталоги. Каждая строка может содержать одну из следующих\n"
+" директив::"
+
+msgid " include path/to/file-or-dir"
+msgstr " include путь/к/файлу-или-каталогу"
+
+msgid " exclude path/to/file-or-dir"
+msgstr " exclude путь/к/файлу-или-каталогу/"
+
+msgid " rename path/to/source path/to/destination"
+msgstr " rename путь/к/источнику путь/к/назначению"
+
+msgid ""
+" Comment lines start with ``#``. A specified path matches if it\n"
+" equals the full relative name of a file or one of its parent\n"
+" directories. The ``include`` or ``exclude`` directive with the\n"
+" longest matching path applies, so line order does not matter."
+msgstr ""
+" Строки, начинающиеся с ``#`` являются комментариями. Заданный\n"
+" путь используется, если он совпадает с полным относительным путем\n"
+" к файлу или одним из его родительских каталогов. Директивы\n"
+" ``include`` и ``exclude`` применяются для самого длинного из\n"
+" указанных путей, так что порядок строк не важен."
+
+msgid ""
+" The ``include`` directive causes a file, or all files under a\n"
+" directory, to be included in the destination repository, and the\n"
+" exclusion of all other files and directories not explicitly\n"
+" included. The ``exclude`` directive causes files or directories to\n"
+" be omitted. The ``rename`` directive renames a file or directory if\n"
+" it is converted. To rename from a subdirectory into the root of\n"
+" the repository, use ``.`` as the path to rename to."
+msgstr ""
+" Директива ``include`` означает, что в выходной репозиторий\n"
+" попадет указанный файл или каталог со всеми его файлами и\n"
+" подкаталогами, а также что остальные файлы, не указанные явно,\n"
+" будут проигнорированы. Директива ``exclude`` позволяет\n"
+" игнорировать указанный файл или каталог. Директива ``rename``\n"
+" переименовывает файл или каталог при конвертации. Чтобы\n"
+" переместить файл из подкаталога в корень репозитория,\n"
+" используйте ``.`` в качестве пути назначения."
+
+msgid ""
+" The splicemap is a file that allows insertion of synthetic\n"
+" history, letting you specify the parents of a revision. This is\n"
+" useful if you want to e.g. give a Subversion merge two parents, or\n"
+" graft two disconnected series of history together. Each entry\n"
+" contains a key, followed by a space, followed by one or two\n"
+" comma-separated values::"
+msgstr ""
+" Файл slicemap позволяет добавлять искуственные части в историю,\n"
+" позволяя указать родителя для ревизии. Это полезно, например,\n"
+" если вы хотите привязать две родительские ревизии (parent)\n"
+" к результату слияния в SVN, или связать две несвязанные части\n"
+" истории. Каждая запись содержит ключ, отделенный пробелом от\n"
+" одного или двух параметров, разделяемых запятой::"
+
+msgid " key parent1, parent2"
+msgstr " ключ родитель1, родитель2"
+
+msgid ""
+" The key is the revision ID in the source\n"
+" revision control system whose parents should be modified (same\n"
+" format as a key in .hg/shamap). The values are the revision IDs\n"
+" (in either the source or destination revision control system) that\n"
+" should be used as the new parents for that node. For example, if\n"
+" you have merged \"release-1.0\" into \"trunk\", then you should\n"
+" specify the revision on \"trunk\" as the first parent and the one on\n"
+" the \"release-1.0\" branch as the second."
+msgstr ""
+" Ключ - это идентификатор ревизии в исходном репозитории, чьи\n"
+" родители должны быть изменены (тот же формат, что и в файле\n"
+" .hg/shamap). Параметры являются номерами ревизий (во входном\n"
+" или выходном репозитории), которые используются в качестве\n"
+" новых родителей для данного узла. Например, если были слиты\n"
+" ветви \"release-1.0\" и \"trunc\", то нужно указать номер\n"
+" ревизии в ветви \"trunc\" в качестве родитель1, и номер ревизии\n"
+" в ветви \"release-1.0\" в качестве родитель2."
+
+msgid ""
+" The branchmap is a file that allows you to rename a branch when it is\n"
+" being brought in from whatever external repository. When used in\n"
+" conjunction with a splicemap, it allows for a powerful combination\n"
+" to help fix even the most badly mismanaged repositories and turn them\n"
+" into nicely structured Mercurial repositories. The branchmap contains\n"
+" lines of the form::"
+msgstr ""
+" Файл branchmap позволяет переименовать ветвь из любого внешнего\n"
+" репозитория. При использовании вместе с splicemap, предоставляет\n"
+" хорошие возможности упорядочить даже самые запутанные\n"
+" репозитории и преобразовать их в хорошо структурированный\n"
+" репозиторий Mercurial. Содержит строки в формате:"
+
+msgid " original_branch_name new_branch_name"
+msgstr " исходное_имя_ветви новое_имя_ветви"
+
+msgid ""
+" where \"original_branch_name\" is the name of the branch in the\n"
+" source repository, and \"new_branch_name\" is the name of the branch\n"
+" is the destination repository. No whitespace is allowed in the\n"
+" branch names. This can be used to (for instance) move code in one\n"
+" repository from \"default\" to a named branch."
+msgstr ""
+" где \"исходное_имя_ветви\" - это имя ветви в исходном репозитории\n"
+" \"новое_имя_ветви\" - имя ветви в выходном репозитории. Пробелы\n"
+" в именах ветвей не допускаются. Этим можно пользоваться,\n"
+" например, чтобы переместить код с ветви \"default\" на именованную\n"
+" ветвь."
+
+msgid ""
+" Mercurial Source\n"
+" ''''''''''''''''"
+msgstr ""
+" Источник - Mercurial\n"
+" ''''''''''''''''''''''''''''''''"
+
+msgid ""
+" The Mercurial source recognizes the following configuration\n"
+" options, which you can set on the command line with ``--config``:"
+msgstr ""
+" При конвертации из репозитория Mercurial возможны следующие\n"
+" параметры, которые можно указать в командной строке с помощью\n"
+" ``--config``:"
+
+msgid ""
+" :convert.hg.ignoreerrors: ignore integrity errors when reading.\n"
+" Use it to fix Mercurial repositories with missing revlogs, by\n"
+" converting from and to Mercurial. Default is False."
+msgstr ""
+" :convert.hg.ignoreerrors: игнорировать ошибки целостности при\n"
+" чтении. Используется для восстановления репозиториев Mercurial\n"
+" c недостающими revlog'ами путем ковертации из репозитория\n"
+" Mercurial и обратно. По умолчанию False."
+
+msgid ""
+" :convert.hg.saverev: store original revision ID in changeset\n"
+" (forces target IDs to change). It takes and boolean argument\n"
+" and defaults to False."
+msgstr ""
+" :convert.hg.saverev: созранять исходный номер ревизии в наборе\n"
+" изменений (изменяет выходные номера ревизий).\n"
+" True или False, по умолчанию False."
+
+msgid ""
+" :convert.hg.startrev: convert start revision and its descendants.\n"
+" It takes a hg revision identifier and defaults to 0."
+msgstr ""
+" :convert.hg.startrev: конвертировать указанную ревизию и все ее\n"
+" дочерние ревизии. Принимает номер ревизии Mercurial,\n"
+" по умолчанию 0."
+
+msgid ""
+" CVS Source\n"
+" ''''''''''"
+msgstr ""
+" Источник - CVS\n"
+" ''''''''''''''''''''''''''"
+
+msgid ""
+" CVS source will use a sandbox (i.e. a checked-out copy) from CVS\n"
+" to indicate the starting point of what will be converted. Direct\n"
+" access to the repository files is not needed, unless of course the\n"
+" repository is ``:local:``. The conversion uses the top level\n"
+" directory in the sandbox to find the CVS repository, and then uses\n"
+" CVS rlog commands to find files to convert. This means that unless\n"
+" a filemap is given, all files under the starting directory will be\n"
+" converted, and that any directory reorganization in the CVS\n"
+" sandbox is ignored."
+msgstr ""
+" При конвертировании из CVS используется песочница (т.е. копия,\n"
+" полученная с помощью cvs checkout), которая нужна в качестве\n"
+" отправной точки для конвертации. Прямой доступ к файлам\n"
+" репозитория CVS не требутся, если, конечно, не используется\n"
+" метод доступа ``:local:``. Репозиторий CVS ищется по каталогу\n"
+" верхнего уровня песочницы, после чего используется команда\n"
+" CVS rlog для поиска конвертирумых файлов. Это означает, что\n"
+" если не задан файл filemap, будут конвертироваться все файлы\n"
+" из верхнего каталога, и все изменения структуры каталогов в\n"
+" песочнице будут проигнорированы."
+
+msgid " The following options can be used with ``--config``:"
+msgstr " Следующие параметры могут использоваться с ``--config``:"
+
+msgid ""
+" :convert.cvsps.cache: Set to False to disable remote log caching,\n"
+" for testing and debugging purposes. Default is True."
+msgstr ""
+" :convert.cvsps.cache: Установите в False чтобы отключить\n"
+" кеширование удаленного лога, нужно для тестирования и\n"
+" отладки. По умолчанию True."
+
+msgid ""
+" :convert.cvsps.fuzz: Specify the maximum time (in seconds) that is\n"
+" allowed between commits with identical user and log message in\n"
+" a single changeset. When very large files were checked in as\n"
+" part of a changeset then the default may not be long enough.\n"
+" The default is 60."
+msgstr ""
+" :convert.cvsps.fuzz: задает максимально допустимое время \n"
+" (в секундах) между коммитами с одинаковыми пользователем \n"
+" и журнальным сообщением в рамках одного набора изменений. "
+"Значения по умолчанию может не хватить, если очень большие файлы были\n"
+" сохранены в наборе изменений. По умолчанию 60 сек."
+
+msgid ""
+" :convert.cvsps.mergeto: Specify a regular expression to which\n"
+" commit log messages are matched. If a match occurs, then the\n"
+" conversion process will insert a dummy revision merging the\n"
+" branch on which this log message occurs to the branch\n"
+" indicated in the regex. Default is ``{{mergetobranch\n"
+" ([-\\w]+)}}``"
+msgstr ""
+" :convert.cvsps.mergeto: задает регулярное выражение, на\n"
+" совпадение с которым проверяются журнальные сообщения. При\n"
+" совпадении будет вставлена фиктивная ревизия, сливающая\n"
+" ветвь с этим сообщением с указанной в регулярном выражении\n"
+" веткой. Значение по умолчанию: ``{{mergetobranch ([-\\w]+)}}``"
+
+msgid ""
+" :convert.cvsps.mergefrom: Specify a regular expression to which\n"
+" commit log messages are matched. If a match occurs, then the\n"
+" conversion process will add the most recent revision on the\n"
+" branch indicated in the regex as the second parent of the\n"
+" changeset. Default is ``{{mergefrombranch ([-\\w]+)}}``"
+msgstr ""
+
+msgid ""
+" :hook.cvslog: Specify a Python function to be called at the end of\n"
+" gathering the CVS log. The function is passed a list with the\n"
+" log entries, and can modify the entries in-place, or add or\n"
+" delete them."
+msgstr ""
+" :hook.cvslog: задает функцию на Питоне, которая вызывается после\n"
+" получения журнала CVS. Функции передается список с журнальными\n"
+" записями, она может изменять их, удалять или добавлять новые."
+
+msgid ""
+" :hook.cvschangesets: Specify a Python function to be called after\n"
+" the changesets are calculated from the the CVS log. The\n"
+" function is passed a list with the changeset entries, and can\n"
+" modify the changesets in-place, or add or delete them."
+msgstr ""
+" :hook.cvschangesets: Задает функцию на Питоне, которая вызывается\n"
+" после того, как будут расчитаны наборы изменений из журнала\n"
+" CVS. Функции передается список с элементами набора изменений,\n"
+" она может изменять их, удалять или добавлять новые."
+
+#, fuzzy
+msgid ""
+" An additional \"debugcvsps\" Mercurial command allows the builtin\n"
+" changeset merging code to be run without doing a conversion. Its\n"
+" parameters and output are similar to that of cvsps 2.1. Please see\n"
+" the command help for more details."
+msgstr ""
+" Дополнительная команда Mercurial \"debugcvsps\" позволяет\n"
+" запустить встроенный код слияния набора изменений без проведения\n"
+" конвертации. Ее параметры и вывод похожи на cvsps 2.1. Подробней\n"
+" см. справку по cvsps."
+
+msgid ""
+" Subversion Source\n"
+" '''''''''''''''''"
+msgstr ""
+" Источник - Subversion\n"
+" '''''''''''''''''''''"
+
+msgid ""
+" Subversion source detects classical trunk/branches/tags layouts.\n"
+" By default, the supplied ``svn://repo/path/`` source URL is\n"
+" converted as a single branch. If ``svn://repo/path/trunk`` exists\n"
+" it replaces the default branch. If ``svn://repo/path/branches``\n"
+" exists, its subdirectories are listed as possible branches. If\n"
+" ``svn://repo/path/tags`` exists, it is looked for tags referencing\n"
+" converted branches. Default ``trunk``, ``branches`` and ``tags``\n"
+" values can be overridden with following options. Set them to paths\n"
+" relative to the source URL, or leave them blank to disable auto\n"
+" detection."
+msgstr ""
+" В случае Subversion анализируется классическая структура\n"
+" репозитория trunk/branches/tags. По умолчанию заданный URL\n"
+" ``svn://репозиторий/путь`` преобразуется в одну ветку. Если\n"
+" ``svn://репозиторий/путь/trunc`` существует, он заменяет ветку\n"
+" ``default``. Если ``svn://репозиторий/путь/branches`` существует,\n"
+" его подкаталоги перечисляются как возможные ветви. Если\n"
+" ``svn://репозиторий/путь/tags`` существует, в нем ищутся\n"
+" метки, ссылающиеся на конвертируемые ветви. Значения по умолчанию\n"
+" для ``trunc``, ``branches`` и ``tags`` могут быть изменены\n"
+" нижеперечисленными параметрами. Установите их в пути относительно\n"
+" URL источника или оставьте пустыми чтобы отключить автоматическое\n"
+" определение."
+
+msgid " The following options can be set with ``--config``:"
+msgstr " Следующие параметры могут быть заданы в ``--config``:"
+
+msgid ""
+" :convert.svn.branches: specify the directory containing branches.\n"
+" The default is ``branches``."
+msgstr ""
+" :convert.svn.branches: задает каталог, содержащий ветви.\n"
+" По умолчанию ``branches``."
+
+msgid ""
+" :convert.svn.tags: specify the directory containing tags. The\n"
+" default is ``tags``."
+msgstr ""
+" :convert.svn.tags: задает каталог, содержащий метки.\n"
+" По умолчанию``tags``."
+
+msgid ""
+" :convert.svn.trunk: specify the name of the trunk branch. The\n"
+" default is ``trunk``."
+msgstr ""
+" :convert.svn.trunk: задает имя главной ветви (trunc)\n"
+" По умолчанию ``trunk``."
+
+msgid ""
+" Source history can be retrieved starting at a specific revision,\n"
+" instead of being integrally converted. Only single branch\n"
+" conversions are supported."
+msgstr ""
+" История может извлекаться начиная с указанной ревизии, а не\n"
+" обязательно полностью. Поддерживается только преобразования\n"
+" для одной ветви."
+
+msgid ""
+" :convert.svn.startrev: specify start Subversion revision number.\n"
+" The default is 0."
+msgstr ""
+" :convert.svn.startrev: задает начальный номер ревизии Subversion.\n"
+" По умолчанию 0."
+
+msgid ""
+" Perforce Source\n"
+" '''''''''''''''"
+msgstr ""
+" Источник - Perforce\n"
+" '''''''''''''''''''"
+
+msgid ""
+" The Perforce (P4) importer can be given a p4 depot path or a\n"
+" client specification as source. It will convert all files in the\n"
+" source to a flat Mercurial repository, ignoring labels, branches\n"
+" and integrations. Note that when a depot path is given you then\n"
+" usually should specify a target directory, because otherwise the\n"
+" target may be named ``...-hg``."
+msgstr ""
+" При импорте из Perforce (P4) в качестве источника можно задать путь к "
+"хранилищу или спецификацию клиента. Все файлы источика\n"
+" будут преобразованы в простой репозиторий Mercurial, метки,\n"
+" ветви и точки интеграции игнорируются. Обратите внимание, что при\n"
+" задании пути к хранилищу обычно надо указать также каталог \n"
+" назначения, потому что иначе он может быть назван ``...-hg``."
+
+msgid ""
+" It is possible to limit the amount of source history to be\n"
+" converted by specifying an initial Perforce revision:"
+msgstr ""
+" Можно ограничить количество конвертируемых записей, указав\n"
+" начальную ревизию Perforce:"
+
+msgid ""
+" :convert.p4.startrev: specify initial Perforce revision (a\n"
+" Perforce changelist number)."
+msgstr ""
+" :convert.p4.startrev: задает начальную ревизию Perforce\n"
+" (номер списка изменений Perforce)."
+
+msgid ""
+" Mercurial Destination\n"
+" '''''''''''''''''''''"
+msgstr ""
+" Выходной репозиторий Mercurial\n"
+" ''''''''''''''''''''''''''''''"
+
+msgid " The following options are supported:"
+msgstr " Поддерживаются следующие параметры:"
+
+#, fuzzy
+msgid ""
+" :convert.hg.clonebranches: dispatch source branches in separate\n"
+" clones. The default is False."
+msgstr ""
+" :convert.hg.clonebranches: создавать отдельные репозитории на\n"
+" каждую ветвь источника. По умолчанию False."
+
+#, fuzzy
+msgid ""
+" :convert.hg.tagsbranch: branch name for tag revisions, defaults to\n"
+" ``default``."
+msgstr ""
+" :convert.hg.tagsbranch: имя ветви для помеченных ревизий,\n"
+" по умолчанию ``default``\n"
+
+msgid ""
+" :convert.hg.usebranchnames: preserve branch names. The default is\n"
+" True.\n"
+" "
+msgstr ""
+" :convert.hg.usebranchnames: сохранять имена ветвей. По умолчанию\n"
+" True.\n"
+" "
+
+msgid "create changeset information from CVS"
+msgstr "получить информацию о наборе изменений из CVS"
+
+msgid ""
+" This command is intended as a debugging tool for the CVS to\n"
+" Mercurial converter, and can be used as a direct replacement for\n"
+" cvsps."
+msgstr ""
+" Эта команда используется в качестве отладочного инструмента для \n"
+" конвертера CVS->Mercurial и может быть использована в качестве \n"
+" замены для cvsps"
+
+msgid ""
+" Hg debugcvsps reads the CVS rlog for current directory (or any\n"
+" named directory) in the CVS repository, and converts the log to a\n"
+" series of changesets based on matching commit log entries and\n"
+" dates."
+msgstr ""
+" Команда Mercurial debugcvsps читает журнал CVS через rlog для\n"
+" текущего каталога (или другого указанного каталога) в репозитории\n"
+" CVS и преобразует ее журнал в поледовательность наборов изменений\n"
+" основанных на соответсвующих журнальных записях и датах."
+
+msgid "username mapping filename (DEPRECATED, use --authormap instead)"
+msgstr ""
+"файл переназначения имен пользователей (УСТАРЕЛО, используйте --authormap)"
+
+msgid "source repository type"
+msgstr "тип репозитория источника"
+
+msgid "destination repository type"
+msgstr "тип репозитория назначения"
+
+msgid "import up to target revision REV"
+msgstr "импортировать до ревизии РЕВИЗИЯ"
+
+msgid "remap usernames using this file"
+msgstr "переназначить имена пользователей используя этот файл"
+
+msgid "remap file names using contents of file"
+msgstr "переназначить имена файлов согласно файлу"
+
+msgid "splice synthesized history into place"
+msgstr ""
+
+msgid "change branch names while converting"
+msgstr "изменить имена ветвей при конвертации"
+
+msgid "try to sort changesets by branches"
+msgstr "попытаться отсортировать наборы изменений по ветвям"
+
+msgid "try to sort changesets by date"
+msgstr "попытаться отсортировать наборы изменений по дате"
+
+msgid "preserve source changesets order"
+msgstr "сохранять порядок ревизий источника"
+
+msgid "hg convert [OPTION]... SOURCE [DEST [REVMAP]]"
+msgstr "hg convert [ПАРАМЕТР]... ИСТОЧНИК [НАЗН [REVMAP]]"
+
+msgid "only return changes on specified branches"
+msgstr "возвращать только изменения на указанных ветвях"
+
+msgid "prefix to remove from file names"
+msgstr "удалить этот префикс из имен файлов"
+
+msgid "only return changes after or between specified tags"
+msgstr "возвращать только изменения после или между указанными метками"
+
+msgid "update cvs log cache"
+msgstr "обновить кэш жирнала cvs"
+
+msgid "create new cvs log cache"
+msgstr "создать новый кэш лога cvs"
+
+msgid "set commit time fuzz in seconds"
+msgstr ""
+
+msgid "specify cvsroot"
+msgstr "задать cvsroot"
+
+msgid "show parent changesets"
+msgstr "указать родительские ревизии"
+
+msgid "show current changeset in ancestor branches"
+msgstr "показывать текущий набор изменений на родительских ветвях"
+
+msgid "ignored for compatibility"
+msgstr "игнорировать для совместимости"
+
+msgid "hg debugcvsps [OPTION]... [PATH]..."
+msgstr "hg debugcvsps [ПАРАМЕТР]... [ПУТЬ]..."
+
+msgid ":svnrev: String. Converted subversion revision number."
+msgstr ""
+
+msgid ":svnpath: String. Converted subversion revision project path."
+msgstr ""
+
+msgid ":svnuuid: String. Converted subversion revision repository identifier."
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a Bazaar repository"
+msgstr ""
+
+msgid "Bazaar modules could not be loaded"
+msgstr ""
+
+msgid ""
+"warning: lightweight checkouts may cause conversion failures, try with a "
+"regular branch instead.\n"
+msgstr ""
+
+msgid "bzr source type could not be determined\n"
+msgstr ""
+
+#, python-format
+msgid "%s is not a valid revision in current branch"
+msgstr ""
+
+#, python-format
+msgid "%s is not available in %s anymore"
+msgstr ""
+
+#, python-format
+msgid "%s.%s symlink has no target"
+msgstr ""
+
+#, python-format
+msgid "cannot find required \"%s\" tool"
+msgstr ""
+
+#, python-format
+msgid "%s error:\n"
+msgstr ""
+
+#, python-format
+msgid "syntax error in %s(%d): key/value pair expected"
+msgstr ""
+
+#, python-format
+msgid "could not open map file %r: %s"
+msgstr ""
+
+#, python-format
+msgid "%s: invalid source repository type"
+msgstr ""
+
+#, python-format
+msgid "%s: missing or unsupported repository"
+msgstr ""
+
+#, python-format
+msgid "%s: invalid destination repository type"
+msgstr ""
+
+#, python-format
+msgid "convert: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s: unknown repository type"
+msgstr ""
+
+msgid "getting files"
+msgstr ""
+
+msgid "revisions"
+msgstr ""
+
+msgid "scanning"
+msgstr ""
+
+#, python-format
+msgid "unknown sort mode: %s"
+msgstr ""
+
+#, python-format
+msgid "cycle detected between %s and %s"
+msgstr ""
+
+msgid "not all revisions were sorted"
+msgstr ""
+
+#, python-format
+msgid "Writing author map file %s\n"
+msgstr ""
+
+#, python-format
+msgid "Ignoring bad line in author map file %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "mapping author %s to %s\n"
+msgstr ""
+
+#, python-format
+msgid "overriding mapping for author %s, was %s, will be %s\n"
+msgstr ""
+
+#, python-format
+msgid "spliced in %s as parents of %s\n"
+msgstr ""
+
+msgid "scanning source...\n"
+msgstr ""
+
+msgid "sorting...\n"
+msgstr ""
+
+msgid "converting...\n"
+msgstr ""
+
+#, python-format
+msgid "source: %s\n"
+msgstr ""
+
+msgid "converting"
+msgstr ""
+
+#, python-format
+msgid "assuming destination %s\n"
+msgstr ""
+
+msgid "more than one sort mode specified"
+msgstr ""
+
+msgid "--sourcesort is not supported by this data source"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a CVS checkout"
+msgstr ""
+
+#, python-format
+msgid "revision %s is not a patchset number"
+msgstr ""
+
+#, python-format
+msgid "connecting to %s\n"
+msgstr ""
+
+msgid "CVS pserver authentication failed"
+msgstr ""
+
+#, python-format
+msgid ""
+"unexpected response from CVS server (expected \"Valid-requests\", but got %r)"
+msgstr ""
+
+#, python-format
+msgid "%d bytes missing from remote file"
+msgstr ""
+
+msgid "malformed response from CVS"
+msgstr ""
+
+#, python-format
+msgid "cvs server: %s\n"
+msgstr ""
+
+#, python-format
+msgid "unknown CVS response: %s"
+msgstr ""
+
+msgid "collecting CVS rlog\n"
+msgstr ""
+
+msgid "not a CVS sandbox"
+msgstr ""
+
+#, python-format
+msgid "reading cvs log cache %s\n"
+msgstr ""
+
+#, python-format
+msgid "cache has %d log entries\n"
+msgstr ""
+
+#, python-format
+msgid "error reading cache: %r\n"
+msgstr ""
+
+#, python-format
+msgid "running %s\n"
+msgstr ""
+
+msgid "RCS file must be followed by working file"
+msgstr ""
+
+msgid "must have at least some revisions"
+msgstr ""
+
+msgid "expected revision number"
+msgstr ""
+
+msgid "revision must be followed by date line"
+msgstr ""
+
+msgid "log cache overlaps with new log entries, re-run without cache."
+msgstr ""
+
+#, python-format
+msgid "writing cvs log cache %s\n"
+msgstr ""
+
+#, python-format
+msgid "%d log entries\n"
+msgstr ""
+
+msgid "creating changesets\n"
+msgstr ""
+
+msgid "synthetic changeset cannot have multiple parents"
+msgstr ""
+
+#, python-format
+msgid ""
+"warning: CVS commit message references non-existent branch %r:\n"
+"%s\n"
+msgstr ""
+
+#, python-format
+msgid "%d changeset entries\n"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a darcs repository"
+msgstr ""
+
+#, python-format
+msgid "darcs version 2.1 or newer needed (found %r)"
+msgstr ""
+
+msgid "Python ElementTree module is not available"
+msgstr ""
+
+#, python-format
+msgid "%s repository format is unsupported, please upgrade"
+msgstr ""
+
+msgid "failed to detect repository format!"
+msgstr ""
+
+msgid "internal calling inconsistency"
+msgstr ""
+
+msgid "errors in filemap"
+msgstr ""
+
+#, python-format
+msgid "%s:%d: path to %s is missing\n"
+msgstr ""
+
+#, python-format
+msgid "%s:%d: %r already in %s list\n"
+msgstr ""
+
+#, python-format
+msgid "%s:%d: superfluous / in %s %r\n"
+msgstr ""
+
+#, python-format
+msgid "%s:%d: unknown directive %r\n"
+msgstr ""
+
+msgid "source repository doesn't support --filemap"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a Git repository"
+msgstr ""
+
+msgid "cannot retrieve git heads"
+msgstr ""
+
+#, python-format
+msgid "cannot read %r object at %s"
+msgstr ""
+
+#, python-format
+msgid "cannot read changes in %s"
+msgstr ""
+
+#, python-format
+msgid "cannot read tags from %s"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a GNU Arch repository"
+msgstr ""
+
+msgid "cannot find a GNU Arch tool"
+msgstr ""
+
+#, python-format
+msgid "analyzing tree version %s...\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"tree analysis stopped because it points to an unregistered archive %s...\n"
+msgstr ""
+
+#, python-format
+msgid "could not parse cat-log of %s"
+msgstr ""
+
+#, python-format
+msgid "%s is not a local Mercurial repository"
+msgstr ""
+
+#, python-format
+msgid "initializing destination %s repository\n"
+msgstr ""
+
+#, python-format
+msgid "could not create hg repository %s as sink"
+msgstr ""
+
+#, python-format
+msgid "pulling from %s into %s\n"
+msgstr ""
+
+msgid "filtering out empty revision\n"
+msgstr ""
+
+msgid "updating tags\n"
+msgstr ""
+
+msgid "updating bookmarks\n"
+msgstr ""
+
+#, python-format
+msgid "%s is not a valid start revision"
+msgstr ""
+
+#, python-format
+msgid "ignoring: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a monotone repository"
+msgstr ""
+
+msgid "bad mtn packet - no end of commandnbr"
+msgstr ""
+
+#, python-format
+msgid "bad mtn packet - bad stream type %s"
+msgstr ""
+
+msgid "bad mtn packet - no divider before size"
+msgstr ""
+
+msgid "bad mtn packet - no end of packet size"
+msgstr ""
+
+#, python-format
+msgid "bad mtn packet - bad packet size %s"
+msgstr ""
+
+#, python-format
+msgid "bad mtn packet - unable to read full packet read %s of %s"
+msgstr ""
+
+#, python-format
+msgid "mtn command '%s' returned %s"
+msgstr ""
+
+#, python-format
+msgid "copying file in renamed directory from '%s' to '%s'"
+msgstr ""
+
+msgid "unable to determine mtn automate interface version"
+msgstr ""
+
+#, python-format
+msgid "mtn automate stdio header unexpected: %s"
+msgstr ""
+
+msgid "failed to reach end of mtn automate stdio headers"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a P4 repository"
+msgstr ""
+
+msgid "reading p4 views\n"
+msgstr ""
+
+msgid "collecting p4 changelists\n"
+msgstr ""
+
+msgid "Mercurial failed to run itself, check hg executable is in PATH"
+msgstr ""
+
+msgid ""
+"svn: cannot probe remote repository, assume it could be a subversion "
+"repository. Use --source-type if you know better.\n"
+msgstr ""
+
+#, python-format
+msgid "%s does not look like a Subversion repository"
+msgstr ""
+
+msgid "Could not load Subversion python bindings"
+msgstr ""
+
+#, python-format
+msgid "Subversion python bindings %d.%d found, 1.4 or later required"
+msgstr ""
+
+msgid "Subversion python bindings are too old, 1.4 or later required"
+msgstr ""
+
+#, python-format
+msgid "svn: revision %s is not an integer"
+msgstr ""
+
+#, python-format
+msgid "svn: start revision %s is not an integer"
+msgstr ""
+
+#, python-format
+msgid "no revision found in module %s"
+msgstr ""
+
+#, python-format
+msgid "expected %s to be at %r, but not found"
+msgstr ""
+
+#, python-format
+msgid "found %s at %r\n"
+msgstr ""
+
+#, python-format
+msgid "ignoring empty branch %s\n"
+msgstr ""
+
+#, python-format
+msgid "found branch %s at %d\n"
+msgstr ""
+
+msgid "svn: start revision is not supported with more than one branch"
+msgstr ""
+
+#, python-format
+msgid "svn: no revision found after start revision %d"
+msgstr ""
+
+#, python-format
+msgid "%s not found up to revision %d"
+msgstr ""
+
+msgid "scanning paths"
+msgstr ""
+
+#, python-format
+msgid "found parent of branch %s at %d: %s\n"
+msgstr ""
+
+#, python-format
+msgid "fetching revision log for \"%s\" from %d to %d\n"
+msgstr ""
+
+#, python-format
+msgid "svn: branch has no revision %s"
+msgstr ""
+
+#, python-format
+msgid "initializing svn repository %r\n"
+msgstr ""
+
+#, python-format
+msgid "initializing svn working copy %r\n"
+msgstr ""
+
+msgid "unexpected svn output:\n"
+msgstr ""
+
+msgid "unable to cope with svn output"
+msgstr ""
+
+msgid "writing Subversion tags is not yet implemented\n"
+msgstr ""
+
+msgid "automatically manage newlines in repository files"
+msgstr ""
+
+msgid ""
+"This extension allows you to manage the type of line endings (CRLF or\n"
+"LF) that are used in the repository and in the local working\n"
+"directory. That way you can get CRLF line endings on Windows and LF on\n"
+"Unix/Mac, thereby letting everybody use their OS native line endings."
+msgstr ""
+
+msgid ""
+"The extension reads its configuration from a versioned ``.hgeol``\n"
+"configuration file found in the root of the working copy. The\n"
+"``.hgeol`` file use the same syntax as all other Mercurial\n"
+"configuration files. It uses two sections, ``[patterns]`` and\n"
+"``[repository]``."
+msgstr ""
+
+msgid ""
+"The ``[patterns]`` section specifies how line endings should be\n"
+"converted between the working copy and the repository. The format is\n"
+"specified by a file pattern. The first match is used, so put more\n"
+"specific patterns first. The available line endings are ``LF``,\n"
+"``CRLF``, and ``BIN``."
+msgstr ""
+
+msgid ""
+"Files with the declared format of ``CRLF`` or ``LF`` are always\n"
+"checked out and stored in the repository in that format and files\n"
+"declared to be binary (``BIN``) are left unchanged. Additionally,\n"
+"``native`` is an alias for checking out in the platform's default line\n"
+"ending: ``LF`` on Unix (including Mac OS X) and ``CRLF`` on\n"
+"Windows. Note that ``BIN`` (do nothing to line endings) is Mercurial's\n"
+"default behaviour; it is only needed if you need to override a later,\n"
+"more general pattern."
+msgstr ""
+
+msgid ""
+"The optional ``[repository]`` section specifies the line endings to\n"
+"use for files stored in the repository. It has a single setting,\n"
+"``native``, which determines the storage line endings for files\n"
+"declared as ``native`` in the ``[patterns]`` section. It can be set to\n"
+"``LF`` or ``CRLF``. The default is ``LF``. For example, this means\n"
+"that on Windows, files configured as ``native`` (``CRLF`` by default)\n"
+"will be converted to ``LF`` when stored in the repository. Files\n"
+"declared as ``LF``, ``CRLF``, or ``BIN`` in the ``[patterns]`` section\n"
+"are always stored as-is in the repository."
+msgstr ""
+
+msgid "Example versioned ``.hgeol`` file::"
+msgstr ""
+
+msgid ""
+" [patterns]\n"
+" **.py = native\n"
+" **.vcproj = CRLF\n"
+" **.txt = native\n"
+" Makefile = LF\n"
+" **.jpg = BIN"
+msgstr ""
+
+msgid ""
+" [repository]\n"
+" native = LF"
+msgstr ""
+
+msgid ""
+".. note::\n"
+" The rules will first apply when files are touched in the working\n"
+" copy, e.g. by updating to null and back to tip to touch all files."
+msgstr ""
+
+msgid ""
+"The extension uses an optional ``[eol]`` section in your hgrc file\n"
+"(not the ``.hgeol`` file) for settings that control the overall\n"
+"behavior. There are two settings:"
+msgstr ""
+
+msgid ""
+"- ``eol.native`` (default ``os.linesep``) can be set to ``LF`` or\n"
+" ``CRLF`` to override the default interpretation of ``native`` for\n"
+" checkout. This can be used with :hg:`archive` on Unix, say, to\n"
+" generate an archive where files have line endings for Windows."
+msgstr ""
+
+msgid ""
+"- ``eol.only-consistent`` (default True) can be set to False to make\n"
+" the extension convert files with inconsistent EOLs. Inconsistent\n"
+" means that there is both ``CRLF`` and ``LF`` present in the file.\n"
+" Such files are normally not touched under the assumption that they\n"
+" have mixed EOLs on purpose."
+msgstr ""
+
+msgid ""
+"The extension provides ``cleverencode:`` and ``cleverdecode:`` filters\n"
+"like the deprecated win32text extension does. This means that you can\n"
+"disable win32text and enable eol and your filters will still work. You\n"
+"only need to these filters until you have prepared a ``.hgeol`` file."
+msgstr ""
+
+msgid ""
+"The ``win32text.forbid*`` hooks provided by the win32text extension\n"
+"have been unified into a single hook named ``eol.checkheadshook``. The\n"
+"hook will lookup the expected line endings from the ``.hgeol`` file,\n"
+"which means you must migrate to a ``.hgeol`` file first before using\n"
+"the hook. ``eol.checkheadshook`` only checks heads, intermediate\n"
+"invalid revisions will be pushed. To forbid them completely, use the\n"
+"``eol.checkallhook`` hook. These hooks are best used as\n"
+"``pretxnchangegroup`` hooks."
+msgstr ""
+
+msgid ""
+"See :hg:`help patterns` for more information about the glob patterns\n"
+"used.\n"
+msgstr ""
+
+#, python-format
+msgid "ignoring unknown EOL style '%s' from %s\n"
+msgstr ""
+
+#, python-format
+msgid "warning: ignoring .hgeol file due to parse error at %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid " %s in %s should not have %s line endings"
+msgstr ""
+
+msgid "end-of-line check failed:\n"
+msgstr ""
+
+msgid "the eol extension is incompatible with the win32text extension\n"
+msgstr ""
+
+#, python-format
+msgid "inconsistent newline style in %s\n"
+msgstr ""
+
+msgid "command to allow external programs to compare revisions"
+msgstr ""
+
+msgid ""
+"The extdiff Mercurial extension allows you to use external programs\n"
+"to compare revisions, or revision with working directory. The external\n"
+"diff programs are called with a configurable set of options and two\n"
+"non-option arguments: paths to directories containing snapshots of\n"
+"files to compare."
+msgstr ""
+
+msgid ""
+"The extdiff extension also allows you to configure new diff commands, so\n"
+"you do not need to type :hg:`extdiff -p kdiff3` always. ::"
+msgstr ""
+
+msgid ""
+" [extdiff]\n"
+" # add new command that runs GNU diff(1) in 'context diff' mode\n"
+" cdiff = gdiff -Nprc5\n"
+" ## or the old way:\n"
+" #cmd.cdiff = gdiff\n"
+" #opts.cdiff = -Nprc5"
+msgstr ""
+
+msgid ""
+" # add new command called vdiff, runs kdiff3\n"
+" vdiff = kdiff3"
+msgstr ""
+
+msgid ""
+" # add new command called meld, runs meld (no need to name twice)\n"
+" meld ="
+msgstr ""
+
+msgid ""
+" # add new command called vimdiff, runs gvimdiff with DirDiff plugin\n"
+" # (see http://www.vim.org/scripts/script.php?script_id=102) Non\n"
+" # English user, be sure to put \"let g:DirDiffDynamicDiffText = 1\" in\n"
+" # your .vimrc\n"
+" vimdiff = gvim -f '+next' '+execute \"DirDiff\" argv(0) argv(1)'"
+msgstr ""
+
+msgid "Tool arguments can include variables that are expanded at runtime::"
+msgstr ""
+
+msgid ""
+" $parent1, $plabel1 - filename, descriptive label of first parent\n"
+" $child, $clabel - filename, descriptive label of child revision\n"
+" $parent2, $plabel2 - filename, descriptive label of second parent\n"
+" $root - repository root\n"
+" $parent is an alias for $parent1."
+msgstr ""
+
+msgid ""
+"The extdiff extension will look in your [diff-tools] and [merge-tools]\n"
+"sections for diff tool arguments, when none are specified in [extdiff]."
+msgstr ""
+
+msgid ""
+" [extdiff]\n"
+" kdiff3 ="
+msgstr ""
+
+msgid ""
+" [diff-tools]\n"
+" kdiff3.diffargs=--L1 '$plabel1' --L2 '$clabel' $parent $child"
+msgstr ""
+
+msgid ""
+"You can use -I/-X and list of file or directory names like normal\n"
+":hg:`diff` command. The extdiff extension makes snapshots of only\n"
+"needed files, so running the external diff program will actually be\n"
+"pretty fast (at least faster than having to compare the entire tree).\n"
+msgstr ""
+
+#, python-format
+msgid "making snapshot of %d files from rev %s\n"
+msgstr "создается снимок %d файлов для ревизии %s\n"
+
+#, python-format
+msgid "making snapshot of %d files from working directory\n"
+msgstr ""
+
+msgid "cannot specify --rev and --change at the same time"
+msgstr ""
+
+msgid "cleaning up temp directory\n"
+msgstr "очистка временного каталога\n"
+
+msgid "use external program to diff repository (or selected files)"
+msgstr "Использовать внешнюю программу поиска отличий между ревизиями"
+
+msgid ""
+" Show differences between revisions for the specified files, using\n"
+" an external program. The default program used is diff, with\n"
+" default options \"-Npru\"."
+msgstr ""
+" Показывает различия между ревизиями для указанных файлов, используя\n"
+" внешнюю программу. По умолчанию используется diff с параметрами\n"
+" \"-Npru\"."
+
+msgid ""
+" To select a different program, use the -p/--program option. The\n"
+" program will be passed the names of two directories to compare. To\n"
+" pass additional options to the program, use -o/--option. These\n"
+" will be passed before the names of the directories to compare."
+msgstr ""
+" Чтобы выбрать другую программу, используйте параметр -p/--program.\n"
+" Программе будут переданы имена двух директорий для сравнения.\n"
+" Чтобы передать дополнительные параметры, используйте -o/--option.\n"
+" Они будут переданы перед именами сравниваемых директорий."
+
+msgid ""
+" When two revision arguments are given, then changes are shown\n"
+" between those revisions. If only one revision is specified then\n"
+" that revision is compared to the working directory, and, when no\n"
+" revisions are specified, the working directory files are compared\n"
+" to its parent."
+msgstr ""
+" Если указаны две ревизии, показываются отличия между этими\n"
+" ревизиями. Если указана только одна ревизия, то эта ревизия\n"
+" сравнивается с рабочей копией, а если не указано ни одной\n"
+" ревизии, рабочая копия сравнивается с родительской ревизией\n"
+" репозитория."
+
+msgid "CMD"
+msgstr "КОМАНДА"
+
+msgid "comparison program to run"
+msgstr ""
+
+msgid "OPT"
+msgstr "ОПЦИЯ"
+
+msgid "pass option to comparison program"
+msgstr "передать ОПЦИЮ программе сравнения"
+
+msgid "revision"
+msgstr "ревизия"
+
+msgid "change made by revision"
+msgstr "изменения, сделанные в ревизии"
+
+msgid "hg extdiff [OPT]... [FILE]..."
+msgstr "hg extdiff [ПАРАМЕТР]... [ФАЙЛ]..."
+
+#, python-format
+msgid "use %(path)s to diff repository (or selected files)"
+msgstr "использовать %(path)s для сравнения репозитория (или выбранных файлов)"
+
+#, python-format
+msgid ""
+" Show differences between revisions for the specified files, using\n"
+" the %(path)s program."
+msgstr ""
+" Показать различия между ревизиями для указанных файлов, используя\n"
+" программу %(path)s."
+
+#, python-format
+msgid "hg %s [OPTION]... [FILE]..."
+msgstr "hg %s [ПАРАМЕТР]... [ФАЙЛ]..."
+
+msgid "pull, update and merge in one command"
+msgstr ""
+
+msgid "pull changes from a remote repository, merge new changes if needed."
+msgstr ""
+
+msgid ""
+" This finds all changes from the repository at the specified path\n"
+" or URL and adds them to the local repository."
+msgstr ""
+
+msgid ""
+" If the pulled changes add a new branch head, the head is\n"
+" automatically merged, and the result of the merge is committed.\n"
+" Otherwise, the working directory is updated to include the new\n"
+" changes."
+msgstr ""
+
+msgid ""
+" When a merge occurs, the newly pulled changes are assumed to be\n"
+" \"authoritative\". The head of the new changes is used as the first\n"
+" parent, with local changes as the second. To switch the merge\n"
+" order, use --switch-parent."
+msgstr ""
+
+msgid " See :hg:`help dates` for a list of formats valid for -d/--date."
+msgstr " Список возможных форматов для --d/--dates см. :hg:`help dates`"
+
+msgid ""
+" Returns 0 on success.\n"
+" "
+msgstr ""
+" В случае успеха возвращает 0.\n"
+" "
+
+msgid ""
+"working dir not at branch tip (use \"hg update\" to check out branch tip)"
+msgstr ""
+
+msgid "outstanding uncommitted merge"
+msgstr ""
+
+msgid "outstanding uncommitted changes"
+msgstr ""
+
+msgid "working directory is missing some files"
+msgstr ""
+
+msgid ""
+"multiple heads in this branch (use \"hg heads .\" and \"hg merge\" to merge)"
+msgstr ""
+
+#, python-format
+msgid "pulling from %s\n"
+msgstr ""
+
+msgid ""
+"Other repository doesn't support revision lookup, so a rev cannot be "
+"specified."
+msgstr ""
+
+#, python-format
+msgid ""
+"not merging with %d other new branch heads (use \"hg heads .\" and \"hg merge"
+"\" to merge them)\n"
+msgstr ""
+
+#, python-format
+msgid "updating to %d:%s\n"
+msgstr ""
+
+#, python-format
+msgid "merging with %d:%s\n"
+msgstr ""
+
+#, python-format
+msgid "new changeset %d:%s merges remote changes with local\n"
+msgstr ""
+
+msgid "a specific revision you would like to pull"
+msgstr ""
+
+msgid "edit commit message"
+msgstr ""
+
+msgid "edit commit message (DEPRECATED)"
+msgstr ""
+
+msgid "switch parents when merging"
+msgstr ""
+
+msgid "hg fetch [SOURCE]"
+msgstr ""
+
+msgid "commands to sign and verify changesets"
+msgstr ""
+
+msgid "error while verifying signature"
+msgstr ""
+
+#, python-format
+msgid "%s Bad signature from \"%s\"\n"
+msgstr ""
+
+#, python-format
+msgid "%s Note: Signature has expired (signed by: \"%s\")\n"
+msgstr ""
+
+#, python-format
+msgid "%s Note: This key has expired (signed by: \"%s\")\n"
+msgstr ""
+
+msgid "hg sigs"
+msgstr ""
+
+msgid "list signed changesets"
+msgstr ""
+
+#, python-format
+msgid "%s:%d node does not exist\n"
+msgstr ""
+
+msgid "hg sigcheck REVISION"
+msgstr ""
+
+msgid "verify all the signatures there may be for a particular revision"
+msgstr ""
+
+#, python-format
+msgid "No valid signature for %s\n"
+msgstr ""
+
+msgid "make the signature local"
+msgstr ""
+
+msgid "sign even if the sigfile is modified"
+msgstr ""
+
+msgid "do not commit the sigfile after signing"
+msgstr ""
+
+msgid "ID"
+msgstr "ID"
+
+msgid "the key id to sign with"
+msgstr ""
+
+msgid "TEXT"
+msgstr "ТЕКСТ"
+
+msgid "commit message"
+msgstr ""
+
+msgid "hg sign [OPTION]... [REVISION]..."
+msgstr ""
+
+msgid "add a signature for the current or given revision"
+msgstr ""
+
+msgid ""
+" If no revision is given, the parent of the working directory is used,\n"
+" or tip if no revision is checked out."
+msgstr ""
+
+msgid ""
+" See :hg:`help dates` for a list of formats valid for -d/--date.\n"
+" "
+msgstr ""
+
+msgid "uncommitted merge - please provide a specific revision"
+msgstr ""
+
+#, python-format
+msgid "Signing %d:%s\n"
+msgstr ""
+
+msgid "error while signing"
+msgstr ""
+
+msgid ""
+"working copy of .hgsigs is changed (please commit .hgsigs manually or use --"
+"force)"
+msgstr ""
+
+msgid "unknown signature version"
+msgstr ""
+
+msgid "command to view revision graphs from a shell"
+msgstr ""
+
+msgid ""
+"This extension adds a --graph option to the incoming, outgoing and log\n"
+"commands. When this options is given, an ASCII representation of the\n"
+"revision graph is also shown.\n"
+msgstr ""
+
+#, python-format
+msgid "-G/--graph option is incompatible with --%s"
+msgstr ""
+
+msgid "-G/--graph option is incompatible with --follow with file argument"
+msgstr ""
+
+msgid "NUM"
+msgstr ""
+
+msgid "limit number of changes displayed"
+msgstr "ограничивать количество отображаемых изменений"
+
+msgid "show patch"
+msgstr ""
+
+msgid "show the specified revision or range"
+msgstr ""
+
+msgid "hg glog [OPTION]... [FILE]"
+msgstr ""
+
+msgid "show revision history alongside an ASCII revision graph"
+msgstr ""
+
+msgid ""
+" Print a revision history alongside a revision graph drawn with\n"
+" ASCII characters."
+msgstr ""
+
+msgid ""
+" Nodes printed as an @ character are parents of the working\n"
+" directory.\n"
+" "
+msgstr ""
+
+msgid "show the revision DAG"
+msgstr ""
+
+msgid "hooks for integrating with the CIA.vc notification service"
+msgstr ""
+
+msgid ""
+"This is meant to be run as a changegroup or incoming hook. To\n"
+"configure it, set the following options in your hgrc::"
+msgstr ""
+
+msgid ""
+" [cia]\n"
+" # your registered CIA user name\n"
+" user = foo\n"
+" # the name of the project in CIA\n"
+" project = foo\n"
+" # the module (subproject) (optional)\n"
+" #module = foo\n"
+" # Append a diffstat to the log message (optional)\n"
+" #diffstat = False\n"
+" # Template to use for log messages (optional)\n"
+" #template = {desc}\\n{baseurl}{webroot}/rev/{node}-- {diffstat}\n"
+" # Style to use (optional)\n"
+" #style = foo\n"
+" # The URL of the CIA notification service (optional)\n"
+" # You can use mailto: URLs to send by email, eg\n"
+" # mailto:cia@cia.vc\n"
+" # Make sure to set email.from if you do this.\n"
+" #url = http://cia.vc/\n"
+" # print message instead of sending it (optional)\n"
+" #test = False\n"
+" # number of slashes to strip for url paths\n"
+" #strip = 0"
+msgstr ""
+
+msgid ""
+" [hooks]\n"
+" # one of these:\n"
+" changegroup.cia = python:hgcia.hook\n"
+" #incoming.cia = python:hgcia.hook"
+msgstr ""
+
+msgid ""
+" [web]\n"
+" # If you want hyperlinks (optional)\n"
+" baseurl = http://server/path/to/repo\n"
+msgstr ""
+
+#, python-format
+msgid "%s returned an error: %s"
+msgstr ""
+
+#, python-format
+msgid "hgcia: sending update to %s\n"
+msgstr ""
+
+msgid "email.from must be defined when sending by email"
+msgstr ""
+
+msgid "browse the repository in a graphical way"
+msgstr ""
+
+msgid ""
+"The hgk extension allows browsing the history of a repository in a\n"
+"graphical way. It requires Tcl/Tk version 8.4 or later. (Tcl/Tk is not\n"
+"distributed with Mercurial.)"
+msgstr ""
+
+msgid ""
+"hgk consists of two parts: a Tcl script that does the displaying and\n"
+"querying of information, and an extension to Mercurial named hgk.py,\n"
+"which provides hooks for hgk to get information. hgk can be found in\n"
+"the contrib directory, and the extension is shipped in the hgext\n"
+"repository, and needs to be enabled."
+msgstr ""
+
+msgid ""
+"The :hg:`view` command will launch the hgk Tcl script. For this command\n"
+"to work, hgk must be in your search path. Alternately, you can specify\n"
+"the path to hgk in your configuration file::"
+msgstr ""
+
+msgid ""
+" [hgk]\n"
+" path=/location/of/hgk"
+msgstr ""
+
+msgid ""
+"hgk can make use of the extdiff extension to visualize revisions.\n"
+"Assuming you had already configured extdiff vdiff command, just add::"
+msgstr ""
+
+msgid ""
+" [hgk]\n"
+" vdiff=vdiff"
+msgstr ""
+
+msgid ""
+"Revisions context menu will now display additional entries to fire\n"
+"vdiff on hovered and selected revisions.\n"
+msgstr ""
+
+msgid "diff trees from two commits"
+msgstr ""
+
+msgid "output common ancestor information"
+msgstr ""
+
+msgid "cat a specific revision"
+msgstr ""
+
+msgid "cat-file: type or revision not supplied\n"
+msgstr ""
+
+msgid "aborting hg cat-file only understands commits\n"
+msgstr ""
+
+msgid "parse given revisions"
+msgstr ""
+
+msgid "print revisions"
+msgstr ""
+
+msgid "print extension options"
+msgstr ""
+
+msgid "start interactive history viewer"
+msgstr ""
+
+msgid "hg view [-l LIMIT] [REVRANGE]"
+msgstr ""
+
+msgid "generate patch"
+msgstr ""
+
+msgid "recursive"
+msgstr ""
+
+msgid "pretty"
+msgstr ""
+
+msgid "stdin"
+msgstr ""
+
+msgid "detect copies"
+msgstr ""
+
+msgid "search"
+msgstr ""
+
+msgid "hg git-diff-tree [OPTION]... NODE1 NODE2 [FILE]..."
+msgstr ""
+
+msgid "hg debug-cat-file [OPTION]... TYPE FILE"
+msgstr ""
+
+msgid "hg debug-config"
+msgstr ""
+
+msgid "hg debug-merge-base REV REV"
+msgstr ""
+
+msgid "ignored"
+msgstr "игнорируемые"
+
+msgid "hg debug-rev-parse REV"
+msgstr ""
+
+msgid "header"
+msgstr ""
+
+msgid "topo-order"
+msgstr ""
+
+msgid "parents"
+msgstr ""
+
+msgid "max-count"
+msgstr ""
+
+msgid "hg debug-rev-list [OPTION]... REV..."
+msgstr ""
+
+msgid "syntax highlighting for hgweb (requires Pygments)"
+msgstr ""
+
+msgid ""
+"It depends on the Pygments syntax highlighting library:\n"
+"http://pygments.org/"
+msgstr ""
+
+msgid "There is a single configuration option::"
+msgstr ""
+
+msgid ""
+" [web]\n"
+" pygments_style = <style>"
+msgstr ""
+
+msgid "The default is 'colorful'.\n"
+msgstr ""
+
+msgid "accelerate status report using Linux's inotify service"
+msgstr ""
+
+msgid "start an inotify server for this repository"
+msgstr ""
+
+msgid "debugging information for inotify extension"
+msgstr ""
+
+msgid ""
+" Prints the list of directories being watched by the inotify server.\n"
+" "
+msgstr ""
+
+msgid "directories being watched:\n"
+msgstr ""
+
+msgid "run server in background"
+msgstr "запустить сервер в фоновом режиме"
+
+msgid "used internally by daemon mode"
+msgstr "внутренне используется в режиме сервиса"
+
+msgid "minutes to sit idle before exiting"
+msgstr ""
+
+msgid "name of file to write process ID to"
+msgstr "имя файла для записи ID процесса"
+
+msgid "hg inserve [OPTION]..."
+msgstr ""
+
+msgid "inotify-client: found dead inotify server socket; removing it\n"
+msgstr ""
+
+#, python-format
+msgid "inotify-client: could not start inotify server: %s\n"
+msgstr ""
+
+#, python-format
+msgid "inotify-client: could not talk to new inotify server: %s\n"
+msgstr ""
+
+#, python-format
+msgid "inotify-client: failed to contact inotify server: %s\n"
+msgstr ""
+
+msgid "inotify-client: received empty answer from inotify server"
+msgstr ""
+
+#, python-format
+msgid "(inotify: received response from incompatible server version %d)\n"
+msgstr ""
+
+#, python-format
+msgid "(inotify: received '%s' response when expecting '%s')\n"
+msgstr ""
+
+msgid "this system does not seem to support inotify"
+msgstr ""
+
+#, python-format
+msgid "*** the current per-user limit on the number of inotify watches is %s\n"
+msgstr ""
+
+msgid "*** this limit is too low to watch every directory in this repository\n"
+msgstr ""
+
+msgid "*** counting directories: "
+msgstr ""
+
+#, python-format
+msgid "found %d\n"
+msgstr ""
+
+#, python-format
+msgid "*** to raise the limit from %d to %d (run as root):\n"
+msgstr ""
+
+#, python-format
+msgid "*** echo %d > %s\n"
+msgstr ""
+
+#, python-format
+msgid "cannot watch %s until inotify watch limit is raised"
+msgstr ""
+
+#, python-format
+msgid "inotify service not available: %s"
+msgstr ""
+
+#, python-format
+msgid "watching %r\n"
+msgstr ""
+
+#, python-format
+msgid "watching directories under %r\n"
+msgstr ""
+
+#, python-format
+msgid "%s event: created %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s event: deleted %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s event: modified %s\n"
+msgstr ""
+
+#, python-format
+msgid "filesystem containing %s was unmounted\n"
+msgstr ""
+
+#, python-format
+msgid "%s readable: %d bytes\n"
+msgstr ""
+
+#, python-format
+msgid "%s below threshold - unhooking\n"
+msgstr ""
+
+#, python-format
+msgid "%s reading %d events\n"
+msgstr ""
+
+#, python-format
+msgid "%s hooking back up with %d bytes readable\n"
+msgstr ""
+
+msgid "finished setup\n"
+msgstr ""
+
+#, python-format
+msgid "status: %r %s -> %s\n"
+msgstr ""
+
+msgid "rescanning due to .hgignore change\n"
+msgstr ""
+
+msgid "cannot start: socket is already bound"
+msgstr ""
+
+msgid ""
+"cannot start: tried linking .hg/inotify.sock to a temporary socket but .hg/"
+"inotify.sock already exists"
+msgstr ""
+
+#, python-format
+msgid "answering query for %r\n"
+msgstr ""
+
+#, python-format
+msgid "received query from incompatible client version %d\n"
+msgstr ""
+
+#, python-format
+msgid "unrecognized query type: %s\n"
+msgstr ""
+
+msgid "expand expressions into changelog and summaries"
+msgstr ""
+
+msgid ""
+"This extension allows the use of a special syntax in summaries, which\n"
+"will be automatically expanded into links or any other arbitrary\n"
+"expression, much like InterWiki does."
+msgstr ""
+
+msgid ""
+"A few example patterns (link to bug tracking, etc.) that may be used\n"
+"in your hgrc::"
+msgstr ""
+
+msgid ""
+" [interhg]\n"
+" issues = s!issue(\\d+)!<a href=\"http://bts/issue\\1\">issue\\1</a>!\n"
+" bugzilla = s!((?:bug|b=|(?=#?\\d{4,}))(?:\\s*#?)(\\d+))!<a..=\\2\">\\1</a>!"
+"i\n"
+" boldify = s!(^|\\s)#(\\d+)\\b! <b>#\\2</b>!\n"
+msgstr ""
+
+#, python-format
+msgid "interhg: invalid pattern for %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "interhg: invalid regexp for %s: %s\n"
+msgstr ""
+
+msgid "expand keywords in tracked files"
+msgstr ""
+
+msgid ""
+"This extension expands RCS/CVS-like or self-customized $Keywords$ in\n"
+"tracked text files selected by your configuration."
+msgstr ""
+
+msgid ""
+"Keywords are only expanded in local repositories and not stored in the\n"
+"change history. The mechanism can be regarded as a convenience for the\n"
+"current user or for archive distribution."
+msgstr ""
+
+msgid ""
+"Keywords expand to the changeset data pertaining to the latest change\n"
+"relative to the working directory parent of each file."
+msgstr ""
+
+msgid ""
+"Configuration is done in the [keyword], [keywordset] and [keywordmaps]\n"
+"sections of hgrc files."
+msgstr ""
+
+msgid "Example::"
+msgstr ""
+
+msgid ""
+" [keyword]\n"
+" # expand keywords in every python file except those matching \"x*\"\n"
+" **.py =\n"
+" x* = ignore"
+msgstr ""
+
+msgid ""
+" [keywordset]\n"
+" # prefer svn- over cvs-like default keywordmaps\n"
+" svn = True"
+msgstr ""
+
+msgid ""
+".. note::\n"
+" The more specific you are in your filename patterns the less you\n"
+" lose speed in huge repositories."
+msgstr ""
+
+msgid ""
+"For [keywordmaps] template mapping and expansion demonstration and\n"
+"control run :hg:`kwdemo`. See :hg:`help templates` for a list of\n"
+"available templates and filters."
+msgstr ""
+
+msgid "Three additional date template filters are provided:"
+msgstr ""
+
+msgid ""
+":``utcdate``: \"2006/09/18 15:13:13\"\n"
+":``svnutcdate``: \"2006-09-18 15:13:13Z\"\n"
+":``svnisodate``: \"2006-09-18 08:13:13 -700 (Mon, 18 Sep 2006)\""
+msgstr ""
+
+msgid ""
+"The default template mappings (view with :hg:`kwdemo -d`) can be\n"
+"replaced with customized keywords and templates. Again, run\n"
+":hg:`kwdemo` to control the results of your configuration changes."
+msgstr ""
+
+msgid ""
+"Before changing/disabling active keywords, you must run :hg:`kwshrink`\n"
+"to avoid storing expanded keywords in the change history."
+msgstr ""
+
+msgid ""
+"To force expansion after enabling it, or a configuration change, run\n"
+":hg:`kwexpand`."
+msgstr ""
+
+msgid ""
+"Expansions spanning more than one line and incremental expansions,\n"
+"like CVS' $Log$, are not supported. A keyword template map \"Log =\n"
+"{desc}\" expands to the first line of the changeset description.\n"
+msgstr ""
+
+#, python-format
+msgid "overwriting %s expanding keywords\n"
+msgstr ""
+
+#, python-format
+msgid "overwriting %s shrinking keywords\n"
+msgstr ""
+
+msgid "[keyword] patterns cannot match"
+msgstr ""
+
+msgid "no [keyword] patterns configured"
+msgstr ""
+
+msgid "show default keyword template maps"
+msgstr ""
+
+msgid "read maps from rcfile"
+msgstr ""
+
+msgid "hg kwdemo [-d] [-f RCFILE] [TEMPLATEMAP]..."
+msgstr ""
+
+msgid "print [keywordmaps] configuration and an expansion example"
+msgstr ""
+
+msgid ""
+" Show current, custom, or default keyword template maps and their\n"
+" expansions."
+msgstr ""
+
+msgid ""
+" Extend the current configuration by specifying maps as arguments\n"
+" and using -f/--rcfile to source an external hgrc file."
+msgstr ""
+
+msgid " Use -d/--default to disable current configuration."
+msgstr ""
+
+msgid ""
+" See :hg:`help templates` for information on templates and filters.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "creating temporary repository at %s\n"
+msgstr ""
+
+msgid ""
+"\n"
+"\tconfiguration using custom keyword template maps\n"
+msgstr ""
+
+msgid "\textending current template maps\n"
+msgstr ""
+
+msgid "\toverriding default svn keywordset\n"
+msgstr ""
+
+msgid "\toverriding default cvs keywordset\n"
+msgstr ""
+
+msgid ""
+"\n"
+"\tconfiguration using default svn keywordset\n"
+msgstr ""
+
+msgid ""
+"\n"
+"\tconfiguration using default cvs keywordset\n"
+msgstr ""
+
+msgid "\tdisabling current template maps\n"
+msgstr ""
+
+msgid ""
+"\n"
+"\tconfiguration using current keyword template maps\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"\n"
+"keywords written to %s:\n"
+msgstr ""
+
+msgid "hg keyword configuration and expansion example"
+msgstr ""
+
+msgid ""
+"\n"
+"\tkeywords expanded\n"
+msgstr ""
+
+msgid "hg kwexpand [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "expand keywords in the working directory"
+msgstr ""
+
+msgid " Run after (re)enabling keyword expansion."
+msgstr ""
+
+msgid ""
+" kwexpand refuses to run if given files contain local changes.\n"
+" "
+msgstr ""
+
+msgid "show keyword status flags of all files"
+msgstr ""
+
+msgid "show files excluded from expansion"
+msgstr ""
+
+msgid "only show unknown (not tracked) files"
+msgstr ""
+
+msgid "hg kwfiles [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "show files configured for keyword expansion"
+msgstr ""
+
+msgid ""
+" List which files in the working directory are matched by the\n"
+" [keyword] configuration patterns."
+msgstr ""
+
+msgid ""
+" Useful to prevent inadvertent keyword expansion and to speed up\n"
+" execution by including only files that are actual candidates for\n"
+" expansion."
+msgstr ""
+
+msgid ""
+" See :hg:`help keyword` on how to construct patterns both for\n"
+" inclusion and exclusion of files."
+msgstr ""
+
+msgid ""
+" With -A/--all and -v/--verbose the codes used to show the status\n"
+" of files are::"
+msgstr ""
+
+msgid ""
+" K = keyword expansion candidate\n"
+" k = keyword expansion candidate (not tracked)\n"
+" I = ignored\n"
+" i = ignored (not tracked)\n"
+" "
+msgstr ""
+
+msgid "hg kwshrink [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "revert expanded keywords in the working directory"
+msgstr ""
+
+msgid " Must be run before changing/disabling active keywords."
+msgstr ""
+
+msgid ""
+" kwshrink refuses to run if given files contain local changes.\n"
+" "
+msgstr ""
+
+msgid "manage a stack of patches"
+msgstr ""
+
+msgid ""
+"This extension lets you work with a stack of patches in a Mercurial\n"
+"repository. It manages two stacks of patches - all known patches, and\n"
+"applied patches (subset of known patches)."
+msgstr ""
+
+msgid ""
+"Known patches are represented as patch files in the .hg/patches\n"
+"directory. Applied patches are both patch files and changesets."
+msgstr ""
+
+msgid "Common tasks (use :hg:`help command` for more details)::"
+msgstr ""
+
+msgid ""
+" create new patch qnew\n"
+" import existing patch qimport"
+msgstr ""
+
+msgid ""
+" print patch series qseries\n"
+" print applied patches qapplied"
+msgstr ""
+
+msgid ""
+" add known patch to applied stack qpush\n"
+" remove patch from applied stack qpop\n"
+" refresh contents of top applied patch qrefresh"
+msgstr ""
+
+msgid ""
+"By default, mq will automatically use git patches when required to\n"
+"avoid losing file mode changes, copy records, binary files or empty\n"
+"files creations or deletions. This behaviour can be configured with::"
+msgstr ""
+
+msgid ""
+" [mq]\n"
+" git = auto/keep/yes/no"
+msgstr ""
+
+msgid ""
+"If set to 'keep', mq will obey the [diff] section configuration while\n"
+"preserving existing git patches upon qrefresh. If set to 'yes' or\n"
+"'no', mq will override the [diff] section and always generate git or\n"
+"regular patches, possibly losing data in the second case."
+msgstr ""
+
+msgid ""
+"You will by default be managing a patch queue named \"patches\". You can\n"
+"create other, independent patch queues with the :hg:`qqueue` command.\n"
+msgstr ""
+
+msgid "print first line of patch header"
+msgstr ""
+
+#, python-format
+msgid "malformated mq status line: %s\n"
+msgstr ""
+
+#, python-format
+msgid "mq.git option can be auto/keep/yes/no got %s"
+msgstr ""
+
+#, python-format
+msgid "%s appears more than once in %s"
+msgstr ""
+
+msgid "guard cannot be an empty string"
+msgstr ""
+
+#, python-format
+msgid "guard %r starts with invalid character: %r"
+msgstr ""
+
+#, python-format
+msgid "invalid character in guard %r: %r"
+msgstr ""
+
+#, python-format
+msgid "guard %r too short"
+msgstr ""
+
+#, python-format
+msgid "guard %r starts with invalid char"
+msgstr ""
+
+#, python-format
+msgid "allowing %s - no guards in effect\n"
+msgstr ""
+
+#, python-format
+msgid "allowing %s - no matching negative guards\n"
+msgstr ""
+
+#, python-format
+msgid "allowing %s - guarded by %r\n"
+msgstr ""
+
+#, python-format
+msgid "skipping %s - guarded by %r\n"
+msgstr ""
+
+#, python-format
+msgid "skipping %s - no matching guards\n"
+msgstr ""
+
+#, python-format
+msgid "error removing undo: %s\n"
+msgstr ""
+
+#, python-format
+msgid "apply failed for patch %s"
+msgstr ""
+
+#, python-format
+msgid "patch didn't work out, merging %s\n"
+msgstr ""
+
+#, python-format
+msgid "update returned %d"
+msgstr ""
+
+msgid "repo commit failed"
+msgstr ""
+
+#, python-format
+msgid "unable to read %s"
+msgstr ""
+
+#, python-format
+msgid "patch %s does not exist\n"
+msgstr ""
+
+#, python-format
+msgid "patch %s is not applied\n"
+msgstr ""
+
+msgid "patch failed, unable to continue (try -v)\n"
+msgstr ""
+
+#, python-format
+msgid "applying %s\n"
+msgstr ""
+
+#, python-format
+msgid "unable to read %s\n"
+msgstr ""
+
+#, python-format
+msgid "patch %s is empty\n"
+msgstr ""
+
+msgid "repository commit failed"
+msgstr ""
+
+msgid "patch failed, rejects left in working dir\n"
+msgstr ""
+
+msgid "fuzz found when applying patch, stopping\n"
+msgstr ""
+
+#, python-format
+msgid "revision %s refers to unknown patches: %s\n"
+msgstr ""
+
+#, python-format
+msgid "unknown patches: %s\n"
+msgstr ""
+
+#, python-format
+msgid "revision %d is not managed"
+msgstr ""
+
+#, python-format
+msgid "cannot delete revision %d above applied patches"
+msgstr ""
+
+#, python-format
+msgid "patch %s finalized without changeset message\n"
+msgstr ""
+
+msgid "qdelete requires at least one revision or patch name"
+msgstr ""
+
+#, python-format
+msgid "cannot delete applied patch %s"
+msgstr ""
+
+#, python-format
+msgid "patch %s not in series file"
+msgstr ""
+
+msgid "no patches applied"
+msgstr ""
+
+msgid "working directory revision is not qtip"
+msgstr ""
+
+#, python-format
+msgid "uncommitted changes in subrepository %s"
+msgstr ""
+
+msgid "local changes found, refresh first"
+msgstr ""
+
+msgid "local changes found"
+msgstr ""
+
+#, python-format
+msgid "\"%s\" cannot be used as the name of a patch"
+msgstr ""
+
+#, python-format
+msgid "patch name cannot begin with \"%s\""
+msgstr ""
+
+#, python-format
+msgid "\"%s\" cannot be used in the name of a patch"
+msgstr ""
+
+#, python-format
+msgid "\"%s\" already exists as a directory"
+msgstr ""
+
+#, python-format
+msgid "patch \"%s\" already exists"
+msgstr ""
+
+msgid "cannot manage merge changesets"
+msgstr ""
+
+#, python-format
+msgid "cannot write patch \"%s\": %s"
+msgstr ""
+
+#, python-format
+msgid "error unlinking %s\n"
+msgstr ""
+
+#, python-format
+msgid "patch name \"%s\" is ambiguous:\n"
+msgstr ""
+
+#, python-format
+msgid "patch %s not in series"
+msgstr ""
+
+msgid "(working directory not at a head)\n"
+msgstr ""
+
+msgid "no patches in series\n"
+msgstr ""
+
+#, python-format
+msgid "qpush: %s is already at the top\n"
+msgstr ""
+
+#, python-format
+msgid "cannot push to a previous patch: %s"
+msgstr ""
+
+#, python-format
+msgid "guarded by %r"
+msgstr ""
+
+msgid "no matching guards"
+msgstr ""
+
+#, python-format
+msgid "cannot push '%s' - %s\n"
+msgstr ""
+
+msgid "all patches are currently applied\n"
+msgstr ""
+
+msgid "patch series already fully applied\n"
+msgstr ""
+
+msgid "cannot use --exact and --move together"
+msgstr ""
+
+msgid "cannot push --exact with applied patches"
+msgstr ""
+
+#, python-format
+msgid "%s does not have a parent recorded"
+msgstr ""
+
+msgid "please specify the patch to move"
+msgstr ""
+
+msgid "cleaning up working directory..."
+msgstr ""
+
+#, python-format
+msgid "errors during apply, please fix and refresh %s\n"
+msgstr ""
+
+#, python-format
+msgid "now at: %s\n"
+msgstr ""
+
+#, python-format
+msgid "patch %s is not applied"
+msgstr ""
+
+msgid "no patches applied\n"
+msgstr ""
+
+#, python-format
+msgid "qpop: %s is already at the top\n"
+msgstr ""
+
+msgid "qpop: forcing dirstate update\n"
+msgstr ""
+
+#, python-format
+msgid "trying to pop unknown node %s"
+msgstr ""
+
+msgid "popping would remove a revision not managed by this patch queue"
+msgstr ""
+
+msgid "deletions found between repo revs"
+msgstr ""
+
+#, python-format
+msgid "popping %s\n"
+msgstr ""
+
+msgid "patch queue now empty\n"
+msgstr ""
+
+msgid "cannot refresh a revision with children"
+msgstr ""
+
+msgid ""
+"refresh interrupted while patch was popped! (revert --all, qpush to "
+"recover)\n"
+msgstr ""
+
+msgid "patch queue directory already exists"
+msgstr ""
+
+#, python-format
+msgid "patch %s is not in series file"
+msgstr ""
+
+msgid "No saved patch data found\n"
+msgstr ""
+
+#, python-format
+msgid "restoring status: %s\n"
+msgstr ""
+
+msgid "save entry has children, leaving it alone\n"
+msgstr ""
+
+#, python-format
+msgid "removing save entry %s\n"
+msgstr ""
+
+#, python-format
+msgid "saved queue repository parents: %s %s\n"
+msgstr ""
+
+msgid "updating queue directory\n"
+msgstr ""
+
+msgid "Unable to load queue repository\n"
+msgstr ""
+
+msgid "save: no patches applied, exiting\n"
+msgstr ""
+
+msgid "status is already saved\n"
+msgstr ""
+
+msgid "hg patches saved state"
+msgstr ""
+
+msgid "repo commit failed\n"
+msgstr ""
+
+#, python-format
+msgid "patch %s is already in the series file"
+msgstr ""
+
+msgid "option \"-r\" not valid when importing files"
+msgstr ""
+
+msgid "option \"-n\" not valid when importing multiple patches"
+msgstr ""
+
+#, python-format
+msgid "revision %d is the root of more than one branch"
+msgstr ""
+
+#, python-format
+msgid "revision %d is already managed"
+msgstr ""
+
+#, python-format
+msgid "revision %d is not the parent of the queue"
+msgstr ""
+
+#, python-format
+msgid "revision %d has unmanaged children"
+msgstr ""
+
+#, python-format
+msgid "cannot import merge revision %d"
+msgstr ""
+
+#, python-format
+msgid "revision %d is not the parent of %d"
+msgstr ""
+
+msgid "-e is incompatible with import from -"
+msgstr ""
+
+#, python-format
+msgid "patch %s does not exist"
+msgstr ""
+
+#, python-format
+msgid "renaming %s to %s\n"
+msgstr ""
+
+msgid "need --name to import a patch from -"
+msgstr ""
+
+#, python-format
+msgid "unable to read file %s"
+msgstr ""
+
+#, python-format
+msgid "adding %s to series file\n"
+msgstr ""
+
+msgid "keep patch file"
+msgstr ""
+
+msgid "stop managing a revision (DEPRECATED)"
+msgstr ""
+
+msgid "hg qdelete [-k] [PATCH]..."
+msgstr ""
+
+msgid "remove patches from queue"
+msgstr ""
+
+msgid ""
+" The patches must not be applied, and at least one patch is required. "
+"With\n"
+" -k/--keep, the patch files are preserved in the patch directory."
+msgstr ""
+
+msgid ""
+" To stop managing a patch and move it into permanent history,\n"
+" use the :hg:`qfinish` command."
+msgstr ""
+
+msgid "show only the last patch"
+msgstr ""
+
+msgid "hg qapplied [-1] [-s] [PATCH]"
+msgstr ""
+
+msgid "print the patches already applied"
+msgstr ""
+
+msgid " Returns 0 on success."
+msgstr ""
+
+msgid "only one patch applied\n"
+msgstr ""
+
+msgid "show only the first patch"
+msgstr ""
+
+msgid "hg qunapplied [-1] [-s] [PATCH]"
+msgstr ""
+
+msgid "print the patches not yet applied"
+msgstr ""
+
+msgid "all patches applied\n"
+msgstr ""
+
+msgid "import file in patch directory"
+msgstr ""
+
+msgid "NAME"
+msgstr ""
+
+msgid "name of patch file"
+msgstr ""
+
+msgid "overwrite existing files"
+msgstr ""
+
+msgid "place existing revisions under mq control"
+msgstr ""
+
+msgid "use git extended diff format"
+msgstr "использовать расширенный формат git для diff'ов"
+
+msgid "qpush after importing"
+msgstr ""
+
+msgid "hg qimport [-e] [-n NAME] [-f] [-g] [-P] [-r REV]... FILE..."
+msgstr ""
+
+msgid "import a patch"
+msgstr ""
+
+msgid ""
+" The patch is inserted into the series after the last applied\n"
+" patch. If no patches have been applied, qimport prepends the patch\n"
+" to the series."
+msgstr ""
+
+msgid ""
+" The patch will have the same name as its source file unless you\n"
+" give it a new one with -n/--name."
+msgstr ""
+
+msgid ""
+" You can register an existing patch inside the patch directory with\n"
+" the -e/--existing flag."
+msgstr ""
+
+msgid ""
+" With -f/--force, an existing patch of the same name will be\n"
+" overwritten."
+msgstr ""
+
+msgid ""
+" An existing changeset may be placed under mq control with -r/--rev\n"
+" (e.g. qimport --rev tip -n patch will place tip under mq control).\n"
+" With -g/--git, patches imported with --rev will use the git diff\n"
+" format. See the diffs help topic for information on why this is\n"
+" important for preserving rename/copy information and permission\n"
+" changes. Use :hg:`qfinish` to remove changesets from mq control."
+msgstr ""
+
+msgid ""
+" To import a patch from standard input, pass - as the patch file.\n"
+" When importing from standard input, a patch name must be specified\n"
+" using the --name flag."
+msgstr ""
+
+msgid " To import an existing patch while renaming it::"
+msgstr ""
+
+msgid " hg qimport -e existing-patch -n new-name"
+msgstr ""
+
+msgid ""
+" Returns 0 if import succeeded.\n"
+" "
+msgstr ""
+
+msgid "create queue repository"
+msgstr ""
+
+msgid "hg qinit [-c]"
+msgstr ""
+
+msgid "init a new queue repository (DEPRECATED)"
+msgstr ""
+
+msgid ""
+" The queue repository is unversioned by default. If\n"
+" -c/--create-repo is specified, qinit will create a separate nested\n"
+" repository for patches (qinit -c may also be run later to convert\n"
+" an unversioned patch repository into a versioned one). You can use\n"
+" qcommit to commit changes to this queue repository."
+msgstr ""
+
+msgid ""
+" This command is deprecated. Without -c, it's implied by other relevant\n"
+" commands. With -c, use :hg:`init --mq` instead."
+msgstr ""
+
+msgid "use pull protocol to copy metadata"
+msgstr "использовать протокол затягивания для копирования метаданных"
+
+msgid "do not update the new working directories"
+msgstr ""
+
+msgid "use uncompressed transfer (fast over LAN)"
+msgstr "не использовать сжатие при передачи (быстрее в локальной сети)"
+
+msgid "REPO"
+msgstr ""
+
+msgid "location of source patch repository"
+msgstr ""
+
+msgid "hg qclone [OPTION]... SOURCE [DEST]"
+msgstr ""
+
+msgid "clone main and patch repository at same time"
+msgstr ""
+
+msgid ""
+" If source is local, destination will have no patches applied. If\n"
+" source is remote, this command can not check if patches are\n"
+" applied in source, so cannot guarantee that patches are not\n"
+" applied in destination. If you clone remote repository, be sure\n"
+" before that it has no patches applied."
+msgstr ""
+
+msgid ""
+" Source patch repository is looked for in <src>/.hg/patches by\n"
+" default. Use -p <url> to change."
+msgstr ""
+
+msgid ""
+" The patch directory must be a nested Mercurial repository, as\n"
+" would be created by :hg:`init --mq`."
+msgstr ""
+
+msgid ""
+" Return 0 on success.\n"
+" "
+msgstr ""
+
+msgid "versioned patch repository not found (see init --mq)"
+msgstr ""
+
+msgid "cloning main repository\n"
+msgstr ""
+
+msgid "cloning patch repository\n"
+msgstr ""
+
+msgid "stripping applied patches from destination repository\n"
+msgstr ""
+
+msgid "updating destination repository\n"
+msgstr ""
+
+msgid "hg qcommit [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "commit changes in the queue repository (DEPRECATED)"
+msgstr ""
+
+msgid " This command is deprecated; use :hg:`commit --mq` instead."
+msgstr ""
+
+msgid "print patches not in series"
+msgstr ""
+
+msgid "hg qseries [-ms]"
+msgstr ""
+
+msgid "print the entire series file"
+msgstr ""
+
+msgid "hg qtop [-s]"
+msgstr ""
+
+msgid "print the name of the current patch"
+msgstr ""
+
+msgid "hg qnext [-s]"
+msgstr ""
+
+msgid "print the name of the next patch"
+msgstr ""
+
+msgid "hg qprev [-s]"
+msgstr ""
+
+msgid "print the name of the previous patch"
+msgstr ""
+
+msgid "import uncommitted changes (DEPRECATED)"
+msgstr ""
+
+msgid "add \"From: <current user>\" to patch"
+msgstr ""
+
+msgid "USER"
+msgstr "ПОЛЬЗОВАТЕЛЬ"
+
+msgid "add \"From: <USER>\" to patch"
+msgstr ""
+
+msgid "add \"Date: <current date>\" to patch"
+msgstr ""
+
+msgid "add \"Date: <DATE>\" to patch"
+msgstr ""
+
+msgid "hg qnew [-e] [-m TEXT] [-l FILE] PATCH [FILE]..."
+msgstr ""
+
+msgid "create a new patch"
+msgstr ""
+
+msgid ""
+" qnew creates a new patch on top of the currently-applied patch (if\n"
+" any). The patch will be initialized with any outstanding changes\n"
+" in the working directory. You may also use -I/--include,\n"
+" -X/--exclude, and/or a list of files after the patch name to add\n"
+" only changes to matching files to the new patch, leaving the rest\n"
+" as uncommitted modifications."
+msgstr ""
+
+msgid ""
+" -u/--user and -d/--date can be used to set the (given) user and\n"
+" date, respectively. -U/--currentuser and -D/--currentdate set user\n"
+" to current user and date to current date."
+msgstr ""
+
+msgid ""
+" -e/--edit, -m/--message or -l/--logfile set the patch header as\n"
+" well as the commit message. If none is specified, the header is\n"
+" empty and the commit message is '[mq]: PATCH'."
+msgstr ""
+
+msgid ""
+" Use the -g/--git option to keep the patch in the git extended diff\n"
+" format. Read the diffs help topic for more information on why this\n"
+" is important for preserving permission changes and copy/rename\n"
+" information."
+msgstr ""
+
+msgid ""
+" Returns 0 on successful creation of a new patch.\n"
+" "
+msgstr ""
+
+msgid "refresh only files already in the patch and specified files"
+msgstr ""
+
+msgid "add/update author field in patch with current user"
+msgstr ""
+
+msgid "add/update author field in patch with given user"
+msgstr ""
+
+msgid "add/update date field in patch with current date"
+msgstr ""
+
+msgid "add/update date field in patch with given date"
+msgstr ""
+
+msgid "hg qrefresh [-I] [-X] [-e] [-m TEXT] [-l FILE] [-s] [FILE]..."
+msgstr ""
+
+msgid "update the current patch"
+msgstr ""
+
+msgid ""
+" If any file patterns are provided, the refreshed patch will\n"
+" contain only the modifications that match those patterns; the\n"
+" remaining modifications will remain in the working directory."
+msgstr ""
+
+msgid ""
+" If -s/--short is specified, files currently included in the patch\n"
+" will be refreshed just like matched files and remain in the patch."
+msgstr ""
+
+msgid ""
+" If -e/--edit is specified, Mercurial will start your configured editor "
+"for\n"
+" you to enter a message. In case qrefresh fails, you will find a backup "
+"of\n"
+" your message in ``.hg/last-message.txt``."
+msgstr ""
+
+msgid ""
+" hg add/remove/copy/rename work as usual, though you might want to\n"
+" use git-style patches (-g/--git or [diff] git=1) to track copies\n"
+" and renames. See the diffs help topic for more information on the\n"
+" git diff format."
+msgstr ""
+
+msgid "option \"-e\" incompatible with \"-m\" or \"-l\""
+msgstr ""
+
+msgid "hg qdiff [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "diff of the current patch and subsequent modifications"
+msgstr ""
+
+msgid ""
+" Shows a diff which includes the current patch as well as any\n"
+" changes which have been made in the working directory since the\n"
+" last refresh (thus showing what the current patch would become\n"
+" after a qrefresh)."
+msgstr ""
+
+msgid ""
+" Use :hg:`diff` if you only want to see the changes made since the\n"
+" last qrefresh, or :hg:`export qtip` if you want to see changes\n"
+" made by the current patch without including changes made since the\n"
+" qrefresh."
+msgstr ""
+
+msgid "edit patch header"
+msgstr ""
+
+msgid "keep folded patch files"
+msgstr ""
+
+msgid "hg qfold [-e] [-k] [-m TEXT] [-l FILE] PATCH..."
+msgstr ""
+
+msgid "fold the named patches into the current patch"
+msgstr ""
+
+msgid ""
+" Patches must not yet be applied. Each patch will be successively\n"
+" applied to the current patch in the order given. If all the\n"
+" patches apply successfully, the current patch will be refreshed\n"
+" with the new cumulative patch, and the folded patches will be\n"
+" deleted. With -k/--keep, the folded patch files will not be\n"
+" removed afterwards."
+msgstr ""
+
+msgid ""
+" The header for each folded patch will be concatenated with the\n"
+" current patch header, separated by a line of ``* * *``."
+msgstr ""
+
+msgid "qfold requires at least one patch name"
+msgstr ""
+
+#, python-format
+msgid "Skipping already folded patch %s\n"
+msgstr ""
+
+#, python-format
+msgid "qfold cannot fold already applied patch %s"
+msgstr ""
+
+#, python-format
+msgid "error folding patch %s"
+msgstr ""
+
+msgid "overwrite any local changes"
+msgstr ""
+
+msgid "hg qgoto [OPTION]... PATCH"
+msgstr ""
+
+msgid "push or pop patches until named patch is at top of stack"
+msgstr ""
+
+msgid "list all patches and guards"
+msgstr ""
+
+msgid "drop all guards"
+msgstr ""
+
+msgid "hg qguard [-l] [-n] [PATCH] [-- [+GUARD]... [-GUARD]...]"
+msgstr ""
+
+msgid "set or print guards for a patch"
+msgstr ""
+
+msgid ""
+" Guards control whether a patch can be pushed. A patch with no\n"
+" guards is always pushed. A patch with a positive guard (\"+foo\") is\n"
+" pushed only if the :hg:`qselect` command has activated it. A patch with\n"
+" a negative guard (\"-foo\") is never pushed if the :hg:`qselect` "
+"command\n"
+" has activated it."
+msgstr ""
+
+msgid ""
+" With no arguments, print the currently active guards.\n"
+" With arguments, set guards for the named patch."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" Specifying negative guards now requires '--'."
+msgstr ""
+
+msgid " To set guards on another patch::"
+msgstr ""
+
+msgid " hg qguard other.patch -- +2.6.17 -stable"
+msgstr ""
+
+msgid "cannot mix -l/--list with options or arguments"
+msgstr ""
+
+msgid "no patch to work with"
+msgstr ""
+
+#, python-format
+msgid "no patch named %s"
+msgstr ""
+
+msgid "hg qheader [PATCH]"
+msgstr ""
+
+msgid "print the header of the topmost or specified patch"
+msgstr ""
+
+msgid "apply on top of local changes"
+msgstr ""
+
+msgid "apply the target patch to its recorded parent"
+msgstr ""
+
+msgid "list patch name in commit text"
+msgstr ""
+
+msgid "apply all patches"
+msgstr ""
+
+msgid "merge from another queue (DEPRECATED)"
+msgstr ""
+
+msgid "merge queue name (DEPRECATED)"
+msgstr ""
+
+msgid "reorder patch series and apply only the patch"
+msgstr ""
+
+msgid "hg qpush [-f] [-l] [-a] [--move] [PATCH | INDEX]"
+msgstr ""
+
+msgid "push the next patch onto the stack"
+msgstr ""
+
+msgid ""
+" When -f/--force is applied, all local changes in patched files\n"
+" will be lost."
+msgstr ""
+
+msgid "no saved queues found, please use -n\n"
+msgstr ""
+
+#, python-format
+msgid "merging with queue at: %s\n"
+msgstr ""
+
+msgid "pop all patches"
+msgstr ""
+
+msgid "queue name to pop (DEPRECATED)"
+msgstr ""
+
+msgid "forget any local changes to patched files"
+msgstr ""
+
+msgid "hg qpop [-a] [-f] [PATCH | INDEX]"
+msgstr ""
+
+msgid "pop the current patch off the stack"
+msgstr ""
+
+msgid ""
+" By default, pops off the top of the patch stack. If given a patch\n"
+" name, keeps popping off patches until the named patch is at the\n"
+" top of the stack."
+msgstr ""
+
+#, python-format
+msgid "using patch queue: %s\n"
+msgstr ""
+
+msgid "hg qrename PATCH1 [PATCH2]"
+msgstr ""
+
+msgid "rename a patch"
+msgstr ""
+
+msgid ""
+" With one argument, renames the current patch to PATCH1.\n"
+" With two arguments, renames PATCH1 to PATCH2."
+msgstr ""
+
+#, python-format
+msgid "%s already exists"
+msgstr ""
+
+#, python-format
+msgid "A patch named %s already exists in the series file"
+msgstr ""
+
+msgid "delete save entry"
+msgstr ""
+
+msgid "update queue working directory"
+msgstr ""
+
+msgid "hg qrestore [-d] [-u] REV"
+msgstr ""
+
+msgid "restore the queue state saved by a revision (DEPRECATED)"
+msgstr ""
+
+msgid " This command is deprecated, use :hg:`rebase` instead."
+msgstr ""
+
+msgid "copy patch directory"
+msgstr ""
+
+msgid "copy directory name"
+msgstr ""
+
+msgid "clear queue status file"
+msgstr ""
+
+msgid "force copy"
+msgstr ""
+
+msgid "hg qsave [-m TEXT] [-l FILE] [-c] [-n NAME] [-e] [-f]"
+msgstr ""
+
+msgid "save current queue state (DEPRECATED)"
+msgstr ""
+
+#, python-format
+msgid "destination %s exists and is not a directory"
+msgstr ""
+
+#, python-format
+msgid "destination %s exists, use -f to force"
+msgstr ""
+
+#, python-format
+msgid "copy %s to %s\n"
+msgstr ""
+
+msgid "force removal of changesets, discard uncommitted changes (no backup)"
+msgstr ""
+
+msgid ""
+"bundle only changesets with local revision number greater than REV which are "
+"not descendants of REV (DEPRECATED)"
+msgstr ""
+
+msgid "no backups"
+msgstr ""
+
+msgid "no backups (DEPRECATED)"
+msgstr ""
+
+msgid "do not modify working copy during strip"
+msgstr ""
+
+msgid "hg strip [-k] [-f] [-n] REV..."
+msgstr ""
+
+msgid "strip changesets and all their descendants from the repository"
+msgstr ""
+
+msgid ""
+" The strip command removes the specified changesets and all their\n"
+" descendants. If the working directory has uncommitted changes, the\n"
+" operation is aborted unless the --force flag is supplied, in which\n"
+" case changes will be discarded."
+msgstr ""
+
+msgid ""
+" If a parent of the working directory is stripped, then the working\n"
+" directory will automatically be updated to the most recent\n"
+" available ancestor of the stripped parent after the operation\n"
+" completes."
+msgstr ""
+
+msgid ""
+" Any stripped changesets are stored in ``.hg/strip-backup`` as a\n"
+" bundle (see :hg:`help bundle` and :hg:`help unbundle`). They can\n"
+" be restored by running :hg:`unbundle .hg/strip-backup/BUNDLE`,\n"
+" where BUNDLE is the bundle file created by the strip. Note that\n"
+" the local revision numbers will in general be different after the\n"
+" restore."
+msgstr ""
+
+msgid ""
+" Use the --no-backup option to discard the backup bundle once the\n"
+" operation completes."
+msgstr ""
+
+msgid "empty revision set"
+msgstr ""
+
+msgid "disable all guards"
+msgstr ""
+
+msgid "list all guards in series file"
+msgstr ""
+
+msgid "pop to before first guarded applied patch"
+msgstr ""
+
+msgid "pop, then reapply patches"
+msgstr ""
+
+msgid "hg qselect [OPTION]... [GUARD]..."
+msgstr ""
+
+msgid "set or print guarded patches to push"
+msgstr ""
+
+msgid ""
+" Use the :hg:`qguard` command to set or print guards on patch, then use\n"
+" qselect to tell mq which guards to use. A patch will be pushed if\n"
+" it has no guards or any positive guards match the currently\n"
+" selected guard, but will not be pushed if any negative guards\n"
+" match the current guard. For example::"
+msgstr ""
+
+msgid ""
+" qguard foo.patch -- -stable (negative guard)\n"
+" qguard bar.patch +stable (positive guard)\n"
+" qselect stable"
+msgstr ""
+
+msgid ""
+" This activates the \"stable\" guard. mq will skip foo.patch (because\n"
+" it has a negative match) but push bar.patch (because it has a\n"
+" positive match)."
+msgstr ""
+
+msgid ""
+" With no arguments, prints the currently active guards.\n"
+" With one argument, sets the active guard."
+msgstr ""
+
+msgid ""
+" Use -n/--none to deactivate guards (no other arguments needed).\n"
+" When no guards are active, patches with positive guards are\n"
+" skipped and patches with negative guards are pushed."
+msgstr ""
+
+msgid ""
+" qselect can change the guards on applied patches. It does not pop\n"
+" guarded patches by default. Use --pop to pop back to the last\n"
+" applied patch that is not guarded. Use --reapply (which implies\n"
+" --pop) to push back to the current patch afterwards, but skip\n"
+" guarded patches."
+msgstr ""
+
+msgid ""
+" Use -s/--series to print a list of all guards in the series file\n"
+" (no other arguments needed). Use -v for more information."
+msgstr ""
+
+msgid "guards deactivated\n"
+msgstr ""
+
+#, python-format
+msgid "number of unguarded, unapplied patches has changed from %d to %d\n"
+msgstr ""
+
+#, python-format
+msgid "number of guarded, applied patches has changed from %d to %d\n"
+msgstr ""
+
+msgid "guards in series file:\n"
+msgstr ""
+
+msgid "no guards in series file\n"
+msgstr ""
+
+msgid "active guards:\n"
+msgstr ""
+
+msgid "no active guards\n"
+msgstr ""
+
+msgid "popping guarded patches\n"
+msgstr ""
+
+msgid "reapplying unguarded patches\n"
+msgstr ""
+
+msgid "finish all applied changesets"
+msgstr ""
+
+msgid "hg qfinish [-a] [REV]..."
+msgstr ""
+
+msgid "move applied patches into repository history"
+msgstr ""
+
+msgid ""
+" Finishes the specified revisions (corresponding to applied\n"
+" patches) by moving them out of mq control into regular repository\n"
+" history."
+msgstr ""
+
+msgid ""
+" Accepts a revision range or the -a/--applied option. If --applied\n"
+" is specified, all applied mq revisions are removed from mq\n"
+" control. Otherwise, the given revisions must be at the base of the\n"
+" stack of applied patches."
+msgstr ""
+
+msgid ""
+" This can be especially useful if your changes have been applied to\n"
+" an upstream repository, or if you are about to push your changes\n"
+" to upstream."
+msgstr ""
+
+msgid "no revisions specified"
+msgstr ""
+
+msgid "list all available queues"
+msgstr ""
+
+msgid "create new queue"
+msgstr ""
+
+msgid "rename active queue"
+msgstr ""
+
+msgid "delete reference to queue"
+msgstr ""
+
+msgid "delete queue, and remove patch dir"
+msgstr ""
+
+msgid "[OPTION] [QUEUE]"
+msgstr ""
+
+msgid "manage multiple patch queues"
+msgstr ""
+
+msgid ""
+" Supports switching between different patch queues, as well as creating\n"
+" new patch queues and deleting existing ones."
+msgstr ""
+
+msgid ""
+" Omitting a queue name or specifying -l/--list will show you the "
+"registered\n"
+" queues - by default the \"normal\" patches queue is registered. The "
+"currently\n"
+" active queue will be marked with \"(active)\"."
+msgstr ""
+
+msgid ""
+" To create a new queue, use -c/--create. The queue is automatically made\n"
+" active, except in the case where there are applied patches from the\n"
+" currently active queue in the repository. Then the queue will only be\n"
+" created and switching will fail."
+msgstr ""
+
+msgid ""
+" To delete an existing queue, use --delete. You cannot delete the "
+"currently\n"
+" active queue."
+msgstr ""
+
+msgid "patches applied - cannot set new queue active"
+msgstr ""
+
+msgid "cannot delete queue that does not exist"
+msgstr ""
+
+msgid "cannot delete currently active queue"
+msgstr ""
+
+msgid " (active)\n"
+msgstr ""
+
+msgid "invalid queue name, may not contain the characters \":\\/.\""
+msgstr ""
+
+#, python-format
+msgid "queue \"%s\" already exists"
+msgstr ""
+
+#, python-format
+msgid "can't rename \"%s\" to its current name"
+msgstr ""
+
+#, python-format
+msgid "non-queue directory \"%s\" already exists"
+msgstr ""
+
+msgid "use --create to create a new queue"
+msgstr ""
+
+msgid "cannot commit over an applied mq patch"
+msgstr ""
+
+msgid "source has mq patches applied"
+msgstr ""
+
+#, python-format
+msgid "mq status file refers to unknown node %s\n"
+msgstr ""
+
+#, python-format
+msgid "Tag %s overrides mq patch of the same name\n"
+msgstr ""
+
+msgid "cannot import over an applied patch"
+msgstr ""
+
+msgid "only a local queue repository may be initialized"
+msgstr ""
+
+msgid "there is no Mercurial repository here (.hg not found)"
+msgstr ""
+
+msgid "no queue repository"
+msgstr ""
+
+#, python-format
+msgid "%d applied"
+msgstr ""
+
+#, python-format
+msgid "%d unapplied"
+msgstr ""
+
+msgid "mq: (empty queue)\n"
+msgstr ""
+
+msgid ""
+"``mq()``\n"
+" Changesets managed by MQ."
+msgstr ""
+
+#, fuzzy
+msgid "mq takes no arguments"
+msgstr "несовместимые аргументы"
+
+msgid "operate on patch repository"
+msgstr "работать с репозиторием патчей mq"
+
+msgid "hooks for sending email notifications at commit/push time"
+msgstr ""
+
+msgid ""
+"Subscriptions can be managed through a hgrc file. Default mode is to\n"
+"print messages to stdout, for testing and configuring."
+msgstr ""
+
+msgid ""
+"To use, configure the notify extension and enable it in hgrc like\n"
+"this::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" notify ="
+msgstr ""
+
+msgid ""
+" [hooks]\n"
+" # one email for each incoming changeset\n"
+" incoming.notify = python:hgext.notify.hook\n"
+" # batch emails when many changesets incoming at one time\n"
+" changegroup.notify = python:hgext.notify.hook"
+msgstr ""
+
+msgid ""
+" [notify]\n"
+" # config items go here"
+msgstr ""
+
+msgid "Required configuration items::"
+msgstr ""
+
+msgid " config = /path/to/file # file containing subscriptions"
+msgstr ""
+
+msgid "Optional configuration items::"
+msgstr ""
+
+msgid ""
+" test = True # print messages to stdout for testing\n"
+" strip = 3 # number of slashes to strip for url paths\n"
+" domain = example.com # domain to use if committer missing domain\n"
+" style = ... # style file to use when formatting email\n"
+" template = ... # template to use when formatting email\n"
+" incoming = ... # template to use when run as incoming hook\n"
+" changegroup = ... # template when run as changegroup hook\n"
+" maxdiff = 300 # max lines of diffs to include (0=none, -1=all)\n"
+" maxsubject = 67 # truncate subject line longer than this\n"
+" diffstat = True # add a diffstat before the diff content\n"
+" sources = serve # notify if source of incoming changes in this "
+"list\n"
+" # (serve == ssh or http, push, pull, bundle)\n"
+" merge = False # send notification for merges (default True)\n"
+" [email]\n"
+" from = user@host.com # email address to send as if none given\n"
+" [web]\n"
+" baseurl = http://hgserver/... # root of hg web site for browsing commits"
+msgstr ""
+
+msgid ""
+"The notify config file has same format as a regular hgrc file. It has\n"
+"two sections so you can express subscriptions in whatever way is\n"
+"handier for you."
+msgstr ""
+
+msgid ""
+" [usersubs]\n"
+" # key is subscriber email, value is \",\"-separated list of glob patterns\n"
+" user@host = pattern"
+msgstr ""
+
+msgid ""
+" [reposubs]\n"
+" # key is glob pattern, value is \",\"-separated list of subscriber emails\n"
+" pattern = user@host"
+msgstr ""
+
+msgid "Glob patterns are matched against path to repository root."
+msgstr ""
+
+msgid ""
+"If you like, you can put notify config file in repository that users\n"
+"can push changes to, they can manage their own subscriptions.\n"
+msgstr ""
+
+#, python-format
+msgid "%s: %d new changesets"
+msgstr ""
+
+#, python-format
+msgid "notify: sending %d subscribers %d changes\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"\n"
+"diffs (truncated from %d to %d lines):"
+msgstr ""
+
+#, python-format
+msgid ""
+"\n"
+"diffs (%d lines):"
+msgstr ""
+
+#, python-format
+msgid "notify: suppressing notification for merge %d:%s\n"
+msgstr ""
+
+msgid "browse command output with an external pager"
+msgstr ""
+
+msgid "To set the pager that should be used, set the application variable::"
+msgstr ""
+
+msgid ""
+" [pager]\n"
+" pager = less -FRSX"
+msgstr ""
+
+msgid ""
+"If no pager is set, the pager extensions uses the environment variable\n"
+"$PAGER. If neither pager.pager, nor $PAGER is set, no pager is used."
+msgstr ""
+
+msgid ""
+"If you notice \"BROKEN PIPE\" error messages, you can disable them by\n"
+"setting::"
+msgstr ""
+
+msgid ""
+" [pager]\n"
+" quiet = True"
+msgstr ""
+
+msgid ""
+"You can disable the pager for certain commands by adding them to the\n"
+"pager.ignore list::"
+msgstr ""
+
+msgid ""
+" [pager]\n"
+" ignore = version, help, update"
+msgstr ""
+
+msgid ""
+"You can also enable the pager only for certain commands using\n"
+"pager.attend. Below is the default list of commands to be paged::"
+msgstr ""
+
+msgid ""
+" [pager]\n"
+" attend = annotate, cat, diff, export, glog, log, qdiff"
+msgstr ""
+
+msgid ""
+"Setting pager.attend to an empty value will cause all commands to be\n"
+"paged."
+msgstr ""
+
+msgid "If pager.attend is present, pager.ignore will be ignored."
+msgstr ""
+
+msgid ""
+"To ignore global commands like :hg:`version` or :hg:`help`, you have\n"
+"to specify them in your user configuration file."
+msgstr ""
+
+msgid ""
+"The --pager=... option can also be used to control when the pager is\n"
+"used. Use a boolean value like yes, no, on, off, or use auto for\n"
+"normal behavior.\n"
+msgstr ""
+
+msgid "when to paginate (boolean, always, auto, or never)"
+msgstr ""
+
+msgid "command to send changesets as (a series of) patch emails"
+msgstr ""
+
+msgid ""
+"The series is started off with a \"[PATCH 0 of N]\" introduction, which\n"
+"describes the series as a whole."
+msgstr ""
+
+msgid ""
+"Each patch email has a Subject line of \"[PATCH M of N] ...\", using the\n"
+"first line of the changeset description as the subject text. The\n"
+"message contains two or three body parts:"
+msgstr ""
+
+msgid ""
+"- The changeset description.\n"
+"- [Optional] The result of running diffstat on the patch.\n"
+"- The patch itself, as generated by :hg:`export`."
+msgstr ""
+
+msgid ""
+"Each message refers to the first in the series using the In-Reply-To\n"
+"and References headers, so they will show up as a sequence in threaded\n"
+"mail and news readers, and in mail archives."
+msgstr ""
+
+msgid ""
+"To configure other defaults, add a section like this to your\n"
+"configuration file::"
+msgstr ""
+
+msgid ""
+" [email]\n"
+" from = My Name <my@email>\n"
+" to = recipient1, recipient2, ...\n"
+" cc = cc1, cc2, ...\n"
+" bcc = bcc1, bcc2, ...\n"
+" reply-to = address1, address2, ..."
+msgstr ""
+
+msgid ""
+"Use ``[patchbomb]`` as configuration section name if you need to\n"
+"override global ``[email]`` address settings."
+msgstr ""
+
+msgid ""
+"Then you can use the :hg:`email` command to mail a series of\n"
+"changesets as a patchbomb."
+msgstr ""
+
+msgid ""
+"You can also either configure the method option in the email section\n"
+"to be a sendmail compatible mailer or fill out the [smtp] section so\n"
+"that the patchbomb extension can automatically send patchbombs\n"
+"directly from the commandline. See the [email] and [smtp] sections in\n"
+"hgrc(5) for details.\n"
+msgstr ""
+
+#, python-format
+msgid "%s Please enter a valid value"
+msgstr ""
+
+msgid "Please enter a valid value.\n"
+msgstr ""
+
+msgid "send patches as attachments"
+msgstr "отправить патчи как вложения"
+
+msgid "send patches as inline attachments"
+msgstr "отправить патчи как вложения в тексте"
+
+msgid "email addresses of blind carbon copy recipients"
+msgstr ""
+
+msgid "email addresses of copy recipients"
+msgstr ""
+
+msgid "ask for confirmation before sending"
+msgstr ""
+
+msgid "add diffstat output to messages"
+msgstr "добавить статистику различий к сообщениям"
+
+msgid "use the given date as the sending date"
+msgstr ""
+
+msgid "use the given file as the series description"
+msgstr ""
+
+msgid "email address of sender"
+msgstr ""
+
+msgid "print messages that would be sent"
+msgstr ""
+
+msgid "write messages to mbox file instead of sending them"
+msgstr ""
+
+msgid "email addresses replies should be sent to"
+msgstr ""
+
+msgid "subject of first message (intro or single patch)"
+msgstr ""
+
+msgid "message identifier to reply to"
+msgstr ""
+
+msgid "flags to add in subject prefixes"
+msgstr ""
+
+msgid "email addresses of recipients"
+msgstr ""
+
+msgid "omit hg patch header"
+msgstr ""
+
+msgid "send changes not found in the target repository"
+msgstr ""
+
+msgid "send changes not in target as a binary bundle"
+msgstr ""
+
+msgid "name of the bundle attachment file"
+msgstr ""
+
+msgid "a revision to send"
+msgstr ""
+
+msgid "run even when remote repository is unrelated (with -b/--bundle)"
+msgstr ""
+
+msgid "a base changeset to specify instead of a destination (with -b/--bundle)"
+msgstr ""
+
+msgid "send an introduction email for a single patch"
+msgstr ""
+
+msgid "hg email [OPTION]... [DEST]..."
+msgstr ""
+
+msgid "send changesets by email"
+msgstr ""
+
+msgid ""
+" By default, diffs are sent in the format generated by\n"
+" :hg:`export`, one per message. The series starts with a \"[PATCH 0\n"
+" of N]\" introduction, which describes the series as a whole."
+msgstr ""
+
+msgid ""
+" Each patch email has a Subject line of \"[PATCH M of N] ...\", using\n"
+" the first line of the changeset description as the subject text.\n"
+" The message contains two or three parts. First, the changeset\n"
+" description."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat option, if the diffstat program is\n"
+" installed, the result of running diffstat on the patch is inserted."
+msgstr ""
+
+msgid " Finally, the patch itself, as generated by :hg:`export`."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat or -c/--confirm options, you will be presented\n"
+" with a final summary of all messages and asked for confirmation before\n"
+" the messages are sent."
+msgstr ""
+
+msgid ""
+" By default the patch is included as text in the email body for\n"
+" easy reviewing. Using the -a/--attach option will instead create\n"
+" an attachment for the patch. With -i/--inline an inline attachment\n"
+" will be created."
+msgstr ""
+
+msgid ""
+" With -o/--outgoing, emails will be generated for patches not found\n"
+" in the destination repository (or only those which are ancestors\n"
+" of the specified revisions if any are provided)"
+msgstr ""
+
+msgid ""
+" With -b/--bundle, changesets are selected as for --outgoing, but a\n"
+" single email containing a binary Mercurial bundle as an attachment\n"
+" will be sent."
+msgstr ""
+
+msgid ""
+" With -m/--mbox, instead of previewing each patchbomb message in a\n"
+" pager or sending the messages directly, it will create a UNIX\n"
+" mailbox file with the patch emails. This mailbox file can be\n"
+" previewed with any mail user agent which supports UNIX mbox\n"
+" files."
+msgstr ""
+
+msgid ""
+" With -n/--test, all steps will run, but mail will not be sent.\n"
+" You will be prompted for an email recipient address, a subject and\n"
+" an introductory message describing the patches of your patchbomb.\n"
+" Then when all is done, patchbomb messages are displayed. If the\n"
+" PAGER environment variable is set, your pager will be fired up once\n"
+" for each patchbomb message, so you can verify everything is alright."
+msgstr ""
+
+msgid ""
+" In case email sending fails, you will find a backup of your series\n"
+" introductory message in ``.hg/last-email.txt``."
+msgstr ""
+
+msgid ""
+" hg email -r 3000 # send patch 3000 only\n"
+" hg email -r 3000 -r 3001 # send patches 3000 and 3001\n"
+" hg email -r 3000:3005 # send patches 3000 through 3005\n"
+" hg email 3000 # send patch 3000 (deprecated)"
+msgstr ""
+
+msgid ""
+" hg email -o # send all patches not in default\n"
+" hg email -o DEST # send all patches not in DEST\n"
+" hg email -o -r 3000 # send all ancestors of 3000 not in default\n"
+" hg email -o -r 3000 DEST # send all ancestors of 3000 not in DEST"
+msgstr ""
+
+msgid ""
+" hg email -b # send bundle of all patches not in default\n"
+" hg email -b DEST # send bundle of all patches not in DEST\n"
+" hg email -b -r 3000 # bundle of all ancestors of 3000 not in "
+"default\n"
+" hg email -b -r 3000 DEST # bundle of all ancestors of 3000 not in DEST"
+msgstr ""
+
+msgid ""
+" hg email -o -m mbox && # generate an mbox file...\n"
+" mutt -R -f mbox # ... and view it with mutt\n"
+" hg email -o -m mbox && # generate an mbox file ...\n"
+" formail -s sendmail \\ # ... and use formail to send from the "
+"mbox\n"
+" -bm -t < mbox # ... using sendmail"
+msgstr ""
+
+msgid ""
+" Before using this command, you will need to enable email in your\n"
+" hgrc. See the [email] section in hgrc(5) for details.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "comparing with %s\n"
+msgstr ""
+
+msgid "no changes found\n"
+msgstr ""
+
+msgid "specify at least one changeset with -r or -o"
+msgstr ""
+
+msgid "--outgoing mode always on with --bundle; do not re-specify --outgoing"
+msgstr ""
+
+msgid "too many destinations"
+msgstr ""
+
+msgid "use only one form to specify the revision"
+msgstr ""
+
+msgid ""
+"\n"
+"Write the introductory message for the patch series."
+msgstr ""
+
+#, python-format
+msgid "This patch series consists of %d patches."
+msgstr ""
+
+msgid ""
+"\n"
+"Final summary:"
+msgstr ""
+
+msgid "are you sure you want to send (yn)?"
+msgstr ""
+
+msgid "&No"
+msgstr "&Нет"
+
+msgid "&Yes"
+msgstr "&Да"
+
+msgid "patchbomb canceled"
+msgstr ""
+
+msgid "Displaying "
+msgstr ""
+
+msgid "Writing "
+msgstr ""
+
+msgid "writing"
+msgstr ""
+
+msgid "Sending "
+msgstr ""
+
+msgid "sending"
+msgstr ""
+
+msgid "show progress bars for some actions"
+msgstr ""
+
+msgid ""
+"This extension uses the progress information logged by hg commands\n"
+"to draw progress bars that are as informative as possible. Some progress\n"
+"bars only offer indeterminate information, while others have a definite\n"
+"end point."
+msgstr ""
+
+msgid "The following settings are available::"
+msgstr ""
+
+msgid ""
+" [progress]\n"
+" delay = 3 # number of seconds (float) before showing the progress bar\n"
+" refresh = 0.1 # time in seconds between refreshes of the progress bar\n"
+" format = topic bar number estimate # format of the progress bar\n"
+" width = <none> # if set, the maximum width of the progress information\n"
+" # (that is, min(width, term width) will be used)\n"
+" clear-complete = True # clear the progress bar after it's done\n"
+" disable = False # if true, don't show a progress bar\n"
+" assume-tty = False # if true, ALWAYS show a progress bar, unless\n"
+" # disable is given"
+msgstr ""
+
+msgid ""
+"Valid entries for the format field are topic, bar, number, unit,\n"
+"estimate, speed, and item. item defaults to the last 20 characters of\n"
+"the item, but this can be changed by adding either ``-<num>`` which\n"
+"would take the last num characters, or ``+<num>`` for the first num\n"
+"characters.\n"
+msgstr ""
+
+#. i18n: format XX seconds as "XXs"
+#, python-format
+msgid "%02ds"
+msgstr ""
+
+#. i18n: format X minutes and YY seconds as "XmYYs"
+#, python-format
+msgid "%dm%02ds"
+msgstr ""
+
+#. i18n: format X hours and YY minutes as "XhYYm"
+#, python-format
+msgid "%dh%02dm"
+msgstr ""
+
+#. i18n: format X days and YY hours as "XdYYh"
+#, python-format
+msgid "%dd%02dh"
+msgstr ""
+
+#. i18n: format X weeks and YY days as "XwYYd"
+#, python-format
+msgid "%dw%02dd"
+msgstr ""
+
+#. i18n: format X years and YY weeks as "XyYYw"
+#, python-format
+msgid "%dy%02dw"
+msgstr ""
+
+#, python-format
+msgid "%d %s/sec"
+msgstr ""
+
+msgid "command to delete untracked files from the working directory"
+msgstr ""
+
+msgid "abort if an error occurs"
+msgstr ""
+
+msgid "purge ignored files too"
+msgstr ""
+
+msgid "print filenames instead of deleting them"
+msgstr ""
+
+msgid "end filenames with NUL, for use with xargs (implies -p/--print)"
+msgstr ""
+
+msgid "hg purge [OPTION]... [DIR]..."
+msgstr ""
+
+msgid "removes files not tracked by Mercurial"
+msgstr ""
+
+msgid ""
+" Delete files not known to Mercurial. This is useful to test local\n"
+" and uncommitted changes in an otherwise-clean source tree."
+msgstr ""
+
+msgid " This means that purge will delete:"
+msgstr ""
+
+msgid ""
+" - Unknown files: files marked with \"?\" by :hg:`status`\n"
+" - Empty directories: in fact Mercurial ignores directories unless\n"
+" they contain files under source control management"
+msgstr ""
+
+msgid " But it will leave untouched:"
+msgstr ""
+
+msgid ""
+" - Modified and unmodified tracked files\n"
+" - Ignored files (unless --all is specified)\n"
+" - New files added to the repository (with :hg:`add`)"
+msgstr ""
+
+msgid ""
+" If directories are given on the command line, only files in these\n"
+" directories are considered."
+msgstr ""
+
+msgid ""
+" Be careful with purge, as you could irreversibly delete some files\n"
+" you forgot to add to the repository. If you only want to print the\n"
+" list of files that this program would delete, use the --print\n"
+" option.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "%s cannot be removed"
+msgstr ""
+
+#, python-format
+msgid "warning: %s\n"
+msgstr ""
+
+#, python-format
+msgid "Removing file %s\n"
+msgstr ""
+
+#, python-format
+msgid "Removing directory %s\n"
+msgstr ""
+
+msgid "command to move sets of revisions to a different ancestor"
+msgstr ""
+
+msgid ""
+"This extension lets you rebase changesets in an existing Mercurial\n"
+"repository."
+msgstr ""
+
+msgid ""
+"For more information:\n"
+"http://mercurial.selenic.com/wiki/RebaseExtension\n"
+msgstr ""
+
+msgid "rebase from the specified changeset"
+msgstr ""
+
+msgid ""
+"rebase from the base of the specified changeset (up to greatest common "
+"ancestor of base and dest)"
+msgstr ""
+
+msgid "rebase onto the specified changeset"
+msgstr ""
+
+msgid "collapse the rebased changesets"
+msgstr ""
+
+msgid "use text as collapse commit message"
+msgstr ""
+
+msgid "read collapse commit message from file"
+msgstr ""
+
+msgid "keep original changesets"
+msgstr ""
+
+msgid "keep original branch names"
+msgstr ""
+
+msgid "force detaching of source from its original branch"
+msgstr ""
+
+msgid "specify merge tool"
+msgstr ""
+
+msgid "continue an interrupted rebase"
+msgstr ""
+
+msgid "abort an interrupted rebase"
+msgstr ""
+
+msgid ""
+"hg rebase [-s REV | -b REV] [-d REV] [options]\n"
+"hg rebase {-a|-c}"
+msgstr ""
+
+msgid "move changeset (and descendants) to a different branch"
+msgstr ""
+
+msgid ""
+" Rebase uses repeated merging to graft changesets from one part of\n"
+" history (the source) onto another (the destination). This can be\n"
+" useful for linearizing *local* changes relative to a master\n"
+" development tree."
+msgstr ""
+
+msgid ""
+" You should not rebase changesets that have already been shared\n"
+" with others. Doing so will force everybody else to perform the\n"
+" same rebase or they will end up with duplicated changesets after\n"
+" pulling in your rebased changesets."
+msgstr ""
+
+msgid ""
+" If you don't specify a destination changeset (``-d/--dest``),\n"
+" rebase uses the tipmost head of the current named branch as the\n"
+" destination. (The destination changeset is not modified by\n"
+" rebasing, but new changesets are added as its descendants.)"
+msgstr ""
+
+msgid ""
+" You can specify which changesets to rebase in two ways: as a\n"
+" \"source\" changeset or as a \"base\" changeset. Both are shorthand\n"
+" for a topologically related set of changesets (the \"source\n"
+" branch\"). If you specify source (``-s/--source``), rebase will\n"
+" rebase that changeset and all of its descendants onto dest. If you\n"
+" specify base (``-b/--base``), rebase will select ancestors of base\n"
+" back to but not including the common ancestor with dest. Thus,\n"
+" ``-b`` is less precise but more convenient than ``-s``: you can\n"
+" specify any changeset in the source branch, and rebase will select\n"
+" the whole branch. If you specify neither ``-s`` nor ``-b``, rebase\n"
+" uses the parent of the working directory as the base."
+msgstr ""
+
+msgid ""
+" By default, rebase recreates the changesets in the source branch\n"
+" as descendants of dest and then destroys the originals. Use\n"
+" ``--keep`` to preserve the original source changesets. Some\n"
+" changesets in the source branch (e.g. merges from the destination\n"
+" branch) may be dropped if they no longer contribute any change."
+msgstr ""
+
+msgid ""
+" One result of the rules for selecting the destination changeset\n"
+" and source branch is that, unlike ``merge``, rebase will do\n"
+" nothing if you are at the latest (tipmost) head of a named branch\n"
+" with two heads. You need to explicitly specify source and/or\n"
+" destination (or ``update`` to the other head, if it's the head of\n"
+" the intended source branch)."
+msgstr ""
+
+msgid ""
+" If a rebase is interrupted to manually resolve a merge, it can be\n"
+" continued with --continue/-c or aborted with --abort/-a."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if nothing to rebase.\n"
+" "
+msgstr ""
+
+msgid "message can only be specified with collapse"
+msgstr ""
+
+msgid "cannot use both abort and continue"
+msgstr ""
+
+msgid "cannot use collapse with continue or abort"
+msgstr ""
+
+msgid "cannot use detach with continue or abort"
+msgstr ""
+
+msgid "abort and continue do not allow specifying revisions"
+msgstr ""
+
+msgid "tool option will be ignored\n"
+msgstr ""
+
+msgid "cannot specify both a revision and a base"
+msgstr ""
+
+msgid "detach requires a revision to be specified"
+msgstr ""
+
+msgid "cannot specify a base with detach"
+msgstr ""
+
+msgid "nothing to rebase\n"
+msgstr ""
+
+msgid "rebasing"
+msgstr ""
+
+msgid "changesets"
+msgstr ""
+
+msgid "unresolved conflicts (see hg resolve, then hg rebase --continue)"
+msgstr ""
+
+#, python-format
+msgid "no changes, revision %d skipped\n"
+msgstr ""
+
+msgid "rebase merging completed\n"
+msgstr ""
+
+msgid "warning: new changesets detected on source branch, not stripping\n"
+msgstr ""
+
+msgid "rebase completed\n"
+msgstr ""
+
+#, python-format
+msgid "%d revisions have been skipped\n"
+msgstr ""
+
+msgid "unable to collapse, there is more than one external parent"
+msgstr ""
+
+#, python-format
+msgid "cannot use revision %d as base, result would have 3 parents"
+msgstr ""
+
+msgid "no rebase in progress"
+msgstr ""
+
+msgid "warning: new changesets detected on target branch, can't abort\n"
+msgstr ""
+
+msgid "rebase aborted\n"
+msgstr ""
+
+msgid "cannot rebase onto an applied mq patch"
+msgstr ""
+
+msgid "source is ancestor of destination"
+msgstr ""
+
+msgid "source is descendant of destination"
+msgstr ""
+
+msgid "rebase working directory to branch head"
+msgstr ""
+
+msgid "commands to interactively select changes for commit/qrefresh"
+msgstr ""
+
+msgid "this modifies a binary file (all or nothing)\n"
+msgstr "это изменяет двоичный файл (всё или ничего)\n"
+
+msgid "this is a binary file\n"
+msgstr "это двоичный файл\n"
+
+#, python-format
+msgid "%d hunks, %d lines changed\n"
+msgstr "изменено полос: %d, строк: %d\n"
+
+msgid "[Ynsfdaq?]"
+msgstr ""
+
+msgid "&Yes, record this change"
+msgstr ""
+
+msgid "&No, skip this change"
+msgstr ""
+
+msgid "&Skip remaining changes to this file"
+msgstr ""
+
+msgid "Record remaining changes to this &file"
+msgstr ""
+
+msgid "&Done, skip remaining changes and files"
+msgstr ""
+
+msgid "Record &all changes to all remaining files"
+msgstr ""
+
+msgid "&Quit, recording no changes"
+msgstr ""
+
+msgid "&?"
+msgstr ""
+
+msgid "user quit"
+msgstr "пользовательский выход"
+
+#, python-format
+msgid "examine changes to %s?"
+msgstr ""
+
+msgid " and "
+msgstr " и "
+
+#, python-format
+msgid "record this change to %r?"
+msgstr ""
+
+#, python-format
+msgid "record change %d/%d to %r?"
+msgstr ""
+
+msgid "interactively select changes to commit"
+msgstr ""
+
+msgid ""
+" If a list of files is omitted, all changes reported by :hg:`status`\n"
+" will be candidates for recording."
+msgstr ""
+
+msgid ""
+" You will be prompted for whether to record changes to each\n"
+" modified file, and for files with multiple changes, for each\n"
+" change to use. For each query, the following responses are\n"
+" possible::"
+msgstr ""
+
+msgid ""
+" y - record this change\n"
+" n - skip this change"
+msgstr ""
+
+msgid ""
+" s - skip remaining changes to this file\n"
+" f - record remaining changes to this file"
+msgstr ""
+
+msgid ""
+" d - done, skip remaining changes and files\n"
+" a - record all changes to all remaining files\n"
+" q - quit, recording no changes"
+msgstr ""
+
+msgid " ? - display help"
+msgstr ""
+
+msgid " This command is not available when committing a merge."
+msgstr ""
+
+msgid "interactively record a new patch"
+msgstr ""
+
+msgid ""
+" See :hg:`help qnew` & :hg:`help record` for more information and\n"
+" usage.\n"
+" "
+msgstr ""
+
+msgid "'mq' extension not loaded"
+msgstr ""
+
+msgid "running non-interactively, use commit instead"
+msgstr ""
+
+msgid "cannot partially commit a merge (use \"hg commit\" instead)"
+msgstr ""
+
+msgid "no changes to record\n"
+msgstr ""
+
+msgid "hg record [OPTION]... [FILE]..."
+msgstr ""
+
+msgid "hg qrecord [OPTION]... PATCH [FILE]..."
+msgstr ""
+
+msgid "recreates hardlinks between repository clones"
+msgstr ""
+
+msgid "recreate hardlinks between two repositories"
+msgstr ""
+
+msgid ""
+" When repositories are cloned locally, their data files will be\n"
+" hardlinked so that they only use the space of a single repository."
+msgstr ""
+
+msgid ""
+" Unfortunately, subsequent pulls into either repository will break\n"
+" hardlinks for any files touched by the new changesets, even if\n"
+" both repositories end up pulling the same changes."
+msgstr ""
+
+msgid ""
+" Similarly, passing --rev to \"hg clone\" will fail to use any\n"
+" hardlinks, falling back to a complete copy of the source\n"
+" repository."
+msgstr ""
+
+msgid ""
+" This command lets you recreate those hardlinks and reclaim that\n"
+" wasted space."
+msgstr ""
+
+msgid ""
+" This repository will be relinked to share space with ORIGIN, which\n"
+" must be on the same local disk. If ORIGIN is omitted, looks for\n"
+" \"default-relink\", then \"default\", in [paths]."
+msgstr ""
+
+msgid ""
+" Do not attempt any read operations on this repository while the\n"
+" command is running. (Both repositories will be locked against\n"
+" writes.)\n"
+" "
+msgstr ""
+
+msgid "hardlinks are not supported on this system"
+msgstr ""
+
+msgid "must specify local origin repository"
+msgstr ""
+
+#, python-format
+msgid "relinking %s to %s\n"
+msgstr ""
+
+msgid "there is nothing to relink\n"
+msgstr ""
+
+#, python-format
+msgid "tip has %d files, estimated total number of files: %s\n"
+msgstr ""
+
+msgid "collecting"
+msgstr ""
+
+msgid "files"
+msgstr ""
+
+#, python-format
+msgid "collected %d candidate storage files\n"
+msgstr ""
+
+msgid "source and destination are on different devices"
+msgstr ""
+
+#, python-format
+msgid "not linkable: %s\n"
+msgstr ""
+
+msgid "pruning"
+msgstr ""
+
+#, python-format
+msgid "pruned down to %d probably relinkable files\n"
+msgstr ""
+
+msgid "relinking"
+msgstr ""
+
+#, python-format
+msgid "relinked %d files (%s reclaimed)\n"
+msgstr ""
+
+msgid "[ORIGIN]"
+msgstr ""
+
+msgid "extend schemes with shortcuts to repository swarms"
+msgstr ""
+
+msgid ""
+"This extension allows you to specify shortcuts for parent URLs with a\n"
+"lot of repositories to act like a scheme, for example::"
+msgstr ""
+
+msgid ""
+" [schemes]\n"
+" py = http://code.python.org/hg/"
+msgstr ""
+
+msgid "After that you can use it like::"
+msgstr ""
+
+msgid " hg clone py://trunk/"
+msgstr ""
+
+msgid ""
+"Additionally there is support for some more complex schemas, for\n"
+"example used by Google Code::"
+msgstr ""
+
+msgid ""
+" [schemes]\n"
+" gcode = http://{1}.googlecode.com/hg/"
+msgstr ""
+
+msgid ""
+"The syntax is taken from Mercurial templates, and you have unlimited\n"
+"number of variables, starting with ``{1}`` and continuing with\n"
+"``{2}``, ``{3}`` and so on. This variables will receive parts of URL\n"
+"supplied, split by ``/``. Anything not specified as ``{part}`` will be\n"
+"just appended to an URL."
+msgstr ""
+
+msgid "For convenience, the extension adds these schemes by default::"
+msgstr ""
+
+msgid ""
+" [schemes]\n"
+" py = http://hg.python.org/\n"
+" bb = https://bitbucket.org/\n"
+" bb+ssh = ssh://hg@bitbucket.org/\n"
+" gcode = https://{1}.googlecode.com/hg/\n"
+" kiln = https://{1}.kilnhg.com/Repo/"
+msgstr ""
+
+msgid ""
+"You can override a predefined scheme by defining a new scheme with the\n"
+"same name.\n"
+msgstr ""
+
+#, python-format
+msgid "custom scheme %s:// conflicts with drive letter %s:\\\n"
+msgstr ""
+
+msgid "share a common history between several working directories"
+msgstr ""
+
+msgid "create a new shared repository"
+msgstr ""
+
+msgid ""
+" Initialize a new repository and working directory that shares its\n"
+" history with another repository."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" using rollback or extensions that destroy/modify history (mq,\n"
+" rebase, etc.) can cause considerable confusion with shared\n"
+" clones. In particular, if two shared clones are both updated to\n"
+" the same changeset, and one of them destroys that changeset\n"
+" with rollback, the other clone will suddenly stop working: all\n"
+" operations will fail with \"abort: working directory has unknown\n"
+" parent\". The only known workaround is to use debugsetparents on\n"
+" the broken clone to reset it to a changeset that still exists\n"
+" (e.g. tip).\n"
+" "
+msgstr ""
+
+msgid "do not create a working copy"
+msgstr ""
+
+msgid "[-U] SOURCE [DEST]"
+msgstr ""
+
+msgid "command to transplant changesets from another branch"
+msgstr ""
+
+msgid "This extension allows you to transplant patches from another branch."
+msgstr ""
+
+msgid ""
+"Transplanted patches are recorded in .hg/transplant/transplants, as a\n"
+"map from a changeset hash to its hash in the source repository.\n"
+msgstr ""
+
+#, python-format
+msgid "skipping already applied revision %s\n"
+msgstr ""
+
+#, python-format
+msgid "skipping merge changeset %s:%s\n"
+msgstr ""
+
+#, python-format
+msgid "%s merged at %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s transplanted to %s\n"
+msgstr ""
+
+#, python-format
+msgid "filtering %s\n"
+msgstr ""
+
+msgid "filter failed"
+msgstr ""
+
+msgid "can only omit patchfile if merging"
+msgstr ""
+
+#, python-format
+msgid "%s: empty changeset"
+msgstr ""
+
+msgid "fix up the merge and run hg transplant --continue"
+msgstr ""
+
+#, python-format
+msgid "%s transplanted as %s\n"
+msgstr ""
+
+msgid "transplant log file is corrupt"
+msgstr ""
+
+#, python-format
+msgid "working dir not at transplant parent %s"
+msgstr ""
+
+msgid "commit failed"
+msgstr ""
+
+msgid "filter corrupted changeset (no user or date)"
+msgstr ""
+
+msgid ""
+"y: transplant this changeset\n"
+"n: skip this changeset\n"
+"m: merge at this changeset\n"
+"p: show patch\n"
+"c: commit selected changesets\n"
+"q: cancel transplant\n"
+"?: show this help\n"
+msgstr ""
+
+msgid "apply changeset? [ynmpcq?]:"
+msgstr ""
+
+msgid "no such option\n"
+msgstr ""
+
+msgid "pull patches from REPO"
+msgstr ""
+
+msgid "BRANCH"
+msgstr "ВЕТВЬ"
+
+msgid "pull patches from branch BRANCH"
+msgstr ""
+
+msgid "pull all changesets up to BRANCH"
+msgstr ""
+
+msgid "skip over REV"
+msgstr ""
+
+msgid "merge at REV"
+msgstr ""
+
+msgid "append transplant info to log message"
+msgstr ""
+
+msgid "continue last transplant session after repair"
+msgstr ""
+
+msgid "filter changesets through command"
+msgstr ""
+
+msgid "hg transplant [-s REPO] [-b BRANCH [-a]] [-p REV] [-m REV] [REV]..."
+msgstr ""
+
+msgid "transplant changesets from another branch"
+msgstr ""
+
+msgid ""
+" Selected changesets will be applied on top of the current working\n"
+" directory with the log of the original changeset. The changesets\n"
+" are copied and will thus appear twice in the history. Use the\n"
+" rebase extension instead if you want to move a whole branch of\n"
+" unpublished changesets."
+msgstr ""
+
+msgid ""
+" If --log is specified, log messages will have a comment appended\n"
+" of the form::"
+msgstr ""
+
+msgid " (transplanted from CHANGESETHASH)"
+msgstr ""
+
+msgid ""
+" You can rewrite the changelog message with the --filter option.\n"
+" Its argument will be invoked with the current changelog message as\n"
+" $1 and the patch as $2."
+msgstr ""
+
+msgid ""
+" If --source/-s is specified, selects changesets from the named\n"
+" repository. If --branch/-b is specified, selects changesets from\n"
+" the branch holding the named revision, up to that revision. If\n"
+" --all/-a is specified, all changesets on the branch will be\n"
+" transplanted, otherwise you will be prompted to select the\n"
+" changesets you want."
+msgstr ""
+
+msgid ""
+" :hg:`transplant --branch REVISION --all` will transplant the\n"
+" selected branch (up to the named revision) onto your current\n"
+" working directory."
+msgstr ""
+
+msgid ""
+" You can optionally mark selected transplanted changesets as merge\n"
+" changesets. You will not be prompted to transplant any ancestors\n"
+" of a merged transplant, and you can merge descendants of them\n"
+" normally instead of transplanting them."
+msgstr ""
+
+msgid ""
+" If no merges or revisions are provided, :hg:`transplant` will\n"
+" start an interactive changeset browser."
+msgstr ""
+
+msgid ""
+" If a changeset application fails, you can fix the merge by hand\n"
+" and then resume where you left off by calling :hg:`transplant\n"
+" --continue/-c`.\n"
+" "
+msgstr ""
+
+msgid "--continue is incompatible with branch, all or merge"
+msgstr ""
+
+msgid "no source URL, branch tag or revision list provided"
+msgstr ""
+
+msgid "--all requires a branch revision"
+msgstr ""
+
+msgid "--all is incompatible with a revision list"
+msgstr ""
+
+msgid "no revision checked out"
+msgstr ""
+
+msgid "outstanding uncommitted merges"
+msgstr ""
+
+msgid "outstanding local changes"
+msgstr ""
+
+msgid ""
+"``transplanted([set])``\n"
+" Transplanted changesets in set, or all transplanted changesets."
+msgstr ""
+
+msgid ""
+":transplanted: String. The node identifier of the transplanted\n"
+" changeset if any."
+msgstr ""
+
+msgid "allow the use of MBCS paths with problematic encodings"
+msgstr ""
+
+msgid ""
+"Some MBCS encodings are not good for some path operations (i.e.\n"
+"splitting path, case conversion, etc.) with its encoded bytes. We call\n"
+"such a encoding (i.e. shift_jis and big5) as \"problematic encoding\".\n"
+"This extension can be used to fix the issue with those encodings by\n"
+"wrapping some functions to convert to Unicode string before path\n"
+"operation."
+msgstr ""
+
+msgid "This extension is useful for:"
+msgstr ""
+
+msgid ""
+"- Japanese Windows users using shift_jis encoding.\n"
+"- Chinese Windows users using big5 encoding.\n"
+"- All users who use a repository with one of problematic encodings on\n"
+" case-insensitive file system."
+msgstr ""
+
+msgid "This extension is not needed for:"
+msgstr ""
+
+msgid ""
+"- Any user who use only ASCII chars in path.\n"
+"- Any user who do not use any of problematic encodings."
+msgstr ""
+
+msgid "Note that there are some limitations on using this extension:"
+msgstr ""
+
+msgid ""
+"- You should use single encoding in one repository.\n"
+"- If the repository path ends with 0x5c, .hg/hgrc cannot be read.\n"
+"- win32mbcs is not compatible with fixutf8 extension."
+msgstr ""
+
+msgid ""
+"By default, win32mbcs uses encoding.encoding decided by Mercurial.\n"
+"You can specify the encoding by config option::"
+msgstr ""
+
+msgid ""
+" [win32mbcs]\n"
+" encoding = sjis"
+msgstr ""
+
+msgid "It is useful for the users who want to commit with UTF-8 log message.\n"
+msgstr ""
+
+#, python-format
+msgid "[win32mbcs] filename conversion failed with %s encoding\n"
+msgstr ""
+
+msgid "[win32mbcs] cannot activate on this platform.\n"
+msgstr ""
+
+msgid "perform automatic newline conversion"
+msgstr ""
+
+msgid ""
+" Deprecation: The win32text extension requires each user to configure\n"
+" the extension again and again for each clone since the configuration\n"
+" is not copied when cloning."
+msgstr ""
+
+msgid ""
+" We have therefore made the ``eol`` as an alternative. The ``eol``\n"
+" uses a version controlled file for its configuration and each clone\n"
+" will therefore use the right settings from the start."
+msgstr ""
+
+msgid "To perform automatic newline conversion, use::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" win32text =\n"
+" [encode]\n"
+" ** = cleverencode:\n"
+" # or ** = macencode:"
+msgstr ""
+
+msgid ""
+" [decode]\n"
+" ** = cleverdecode:\n"
+" # or ** = macdecode:"
+msgstr ""
+
+msgid ""
+"If not doing conversion, to make sure you do not commit CRLF/CR by accident::"
+msgstr ""
+
+msgid ""
+" [hooks]\n"
+" pretxncommit.crlf = python:hgext.win32text.forbidcrlf\n"
+" # or pretxncommit.cr = python:hgext.win32text.forbidcr"
+msgstr ""
+
+msgid ""
+"To do the same check on a server to prevent CRLF/CR from being\n"
+"pushed or pulled::"
+msgstr ""
+
+msgid ""
+" [hooks]\n"
+" pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf\n"
+" # or pretxnchangegroup.cr = python:hgext.win32text.forbidcr\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"WARNING: %s already has %s line endings\n"
+"and does not need EOL conversion by the win32text plugin.\n"
+"Before your next commit, please reconsider your encode/decode settings in \n"
+"Mercurial.ini or %s.\n"
+msgstr ""
+
+#, python-format
+msgid "Attempt to commit or push text file(s) using %s line endings\n"
+msgstr ""
+
+#, python-format
+msgid "in %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"\n"
+"To prevent this mistake in your local repository,\n"
+"add to Mercurial.ini or .hg/hgrc:"
+msgstr ""
+
+#, python-format
+msgid ""
+"[hooks]\n"
+"pretxncommit.%s = python:hgext.win32text.forbid%s"
+msgstr ""
+
+#, python-format
+msgid "and also consider adding:"
+msgstr ""
+
+#, python-format
+msgid ""
+"[extensions]\n"
+"win32text =\n"
+"[encode]\n"
+"** = %sencode:\n"
+"[decode]\n"
+"** = %sdecode:\n"
+msgstr ""
+
+msgid ""
+"win32text is deprecated: http://mercurial.selenic.com/wiki/"
+"Win32TextExtension\n"
+msgstr ""
+
+msgid "discover and advertise repositories on the local network"
+msgstr ""
+
+msgid ""
+"Zeroconf-enabled repositories will be announced in a network without\n"
+"the need to configure a server or a service. They can be discovered\n"
+"without knowing their actual IP address."
+msgstr ""
+
+msgid ""
+"To allow other people to discover your repository using run\n"
+":hg:`serve` in your repository::"
+msgstr ""
+
+msgid ""
+" $ cd test\n"
+" $ hg serve"
+msgstr ""
+
+msgid ""
+"You can discover Zeroconf-enabled repositories by running\n"
+":hg:`paths`::"
+msgstr ""
+
+msgid ""
+" $ hg paths\n"
+" zc-test = http://example.com:8000/test\n"
+msgstr ""
+
+msgid "archive prefix contains illegal components"
+msgstr ""
+
+msgid "cannot give prefix when archiving to files"
+msgstr ""
+
+#, python-format
+msgid "unknown archive type '%s'"
+msgstr ""
+
+msgid "archiving"
+msgstr ""
+
+#, python-format
+msgid "bookmark '%s' contains illegal character"
+msgstr ""
+
+#, python-format
+msgid "branch %s not found"
+msgstr ""
+
+#, python-format
+msgid "updating bookmark %s\n"
+msgstr ""
+
+#, python-format
+msgid "not updating divergent bookmark %s\n"
+msgstr ""
+
+msgid "searching for changed bookmarks\n"
+msgstr ""
+
+msgid "no changed bookmarks found\n"
+msgstr ""
+
+msgid "unknown parent"
+msgstr ""
+
+#, python-format
+msgid "integrity check failed on %s:%d"
+msgstr ""
+
+msgid "cannot create new bundle repository"
+msgstr ""
+
+#, python-format
+msgid "stream ended unexpectedly (got %d bytes, expected %d)"
+msgstr ""
+
+#, python-format
+msgid "invalid chunk length %d"
+msgstr ""
+
+#, python-format
+msgid "%s: not a Mercurial bundle"
+msgstr ""
+
+#, python-format
+msgid "%s: unknown bundle version %s"
+msgstr ""
+
+msgid "empty username"
+msgstr ""
+
+#, python-format
+msgid "username %s contains a newline"
+msgstr ""
+
+#, python-format
+msgid "the name '%s' is reserved"
+msgstr ""
+
+msgid "options --message and --logfile are mutually exclusive"
+msgstr ""
+
+#, python-format
+msgid "can't read commit message '%s': %s"
+msgstr ""
+
+msgid "limit must be a positive integer"
+msgstr ""
+
+msgid "limit must be positive"
+msgstr ""
+
+#, python-format
+msgid "invalid format spec '%%%s' in output filename"
+msgstr ""
+
+msgid "cannot specify --changelog and --manifest at the same time"
+msgstr ""
+
+msgid "cannot specify filename with --changelog or --manifest"
+msgstr ""
+
+msgid "cannot specify --changelog or --manifest without a repository"
+msgstr ""
+
+msgid "invalid arguments"
+msgstr "неверные параметры"
+
+#, fuzzy, python-format
+msgid "revlog '%s' not found"
+msgstr "репозиторий %s не найден"
+
+#, python-format
+msgid "%s: not copying - file is not managed\n"
+msgstr ""
+
+#, python-format
+msgid "%s: not copying - file has been marked for remove\n"
+msgstr ""
+
+#, python-format
+msgid "%s: not overwriting - %s collides with %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s: not overwriting - file exists\n"
+msgstr ""
+
+#, python-format
+msgid "%s: not recording move - %s does not exist\n"
+msgstr ""
+
+#, python-format
+msgid "%s: not recording copy - %s does not exist\n"
+msgstr ""
+
+#, python-format
+msgid "%s: deleted in working copy\n"
+msgstr ""
+
+#, python-format
+msgid "%s: cannot copy - %s\n"
+msgstr ""
+
+#, python-format
+msgid "moving %s to %s\n"
+msgstr ""
+
+#, python-format
+msgid "copying %s to %s\n"
+msgstr ""
+
+msgid "no source or destination specified"
+msgstr ""
+
+msgid "no destination specified"
+msgstr ""
+
+msgid "with multiple sources, destination must be an existing directory"
+msgstr ""
+
+#, python-format
+msgid "destination %s is not a directory"
+msgstr ""
+
+msgid "no files to copy"
+msgstr ""
+
+msgid "(consider using --after)\n"
+msgstr ""
+
+msgid "child process failed to start"
+msgstr ""
+
+#, python-format
+msgid "changeset: %d:%s\n"
+msgstr ""
+
+#, python-format
+msgid "branch: %s\n"
+msgstr ""
+
+#, python-format
+msgid "bookmark: %s\n"
+msgstr ""
+
+#, python-format
+msgid "tag: %s\n"
+msgstr ""
+
+#, python-format
+msgid "parent: %d:%s\n"
+msgstr ""
+
+#, python-format
+msgid "manifest: %d:%s\n"
+msgstr ""
+
+#, python-format
+msgid "user: %s\n"
+msgstr ""
+
+#, python-format
+msgid "date: %s\n"
+msgstr ""
+
+msgid "files+:"
+msgstr ""
+
+msgid "files-:"
+msgstr ""
+
+msgid "files:"
+msgstr ""
+
+#, python-format
+msgid "files: %s\n"
+msgstr ""
+
+#, python-format
+msgid "copies: %s\n"
+msgstr ""
+
+#, python-format
+msgid "extra: %s=%s\n"
+msgstr ""
+
+msgid "description:\n"
+msgstr ""
+
+#, python-format
+msgid "summary: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s: no key named '%s'"
+msgstr ""
+
+#, python-format
+msgid "Found revision %s from %s\n"
+msgstr ""
+
+msgid "revision matching date not found"
+msgstr ""
+
+#, python-format
+msgid "cannot follow nonexistent file: \"%s\""
+msgstr ""
+
+msgid "can only follow copies/renames for explicit filenames"
+msgstr ""
+
+#, python-format
+msgid "adding %s\n"
+msgstr ""
+
+#, python-format
+msgid "skipping missing subrepository: %s\n"
+msgstr ""
+
+msgid "HG: Enter commit message. Lines beginning with 'HG:' are removed."
+msgstr ""
+
+msgid "HG: Leave message empty to abort commit."
+msgstr ""
+
+#, python-format
+msgid "HG: user: %s"
+msgstr ""
+
+msgid "HG: branch merge"
+msgstr ""
+
+#, python-format
+msgid "HG: branch '%s'"
+msgstr ""
+
+#, python-format
+msgid "HG: subrepo %s"
+msgstr ""
+
+#, python-format
+msgid "HG: added %s"
+msgstr ""
+
+#, python-format
+msgid "HG: changed %s"
+msgstr ""
+
+#, python-format
+msgid "HG: removed %s"
+msgstr ""
+
+msgid "HG: no files changed"
+msgstr ""
+
+msgid "empty commit message"
+msgstr ""
+
+msgid "repository root directory or name of overlay bundle file"
+msgstr ""
+
+msgid "DIR"
+msgstr ""
+
+msgid "change working directory"
+msgstr ""
+
+msgid "do not prompt, assume 'yes' for any required answers"
+msgstr ""
+
+msgid "suppress output"
+msgstr "с подавлением вывода"
+
+msgid "enable additional output"
+msgstr "включить дополнительный вывод"
+
+msgid "set/override config option (use 'section.name=value')"
+msgstr ""
+
+msgid "CONFIG"
+msgstr ""
+
+msgid "enable debugging output"
+msgstr ""
+
+msgid "start debugger"
+msgstr "запустить отладчик"
+
+msgid "set the charset encoding"
+msgstr ""
+
+msgid "ENCODE"
+msgstr ""
+
+msgid "MODE"
+msgstr ""
+
+msgid "set the charset encoding mode"
+msgstr ""
+
+msgid "always print a traceback on exception"
+msgstr ""
+
+msgid "time how long the command takes"
+msgstr ""
+
+msgid "print command execution profile"
+msgstr "вывести профиль запуска команды"
+
+msgid "output version information and exit"
+msgstr "напечатать информацию о версии и выйти"
+
+msgid "display help and exit"
+msgstr "показать справку и выйти"
+
+msgid "do not perform actions, just print output"
+msgstr "ничего реально не делать, просто напечатать вывод"
+
+msgid "specify ssh command to use"
+msgstr "используемая команда для ssh"
+
+msgid "specify hg command to run on the remote side"
+msgstr "комадна Mercurial, которая будет запущена на удаленном компьютере"
+
+msgid "do not verify server certificate (ignoring web.cacerts config)"
+msgstr "не проверять сертификат сервера (игнорируя настройку web.cacerts)"
+
+msgid "PATTERN"
+msgstr "ШАБЛОН"
+
+msgid "include names matching the given patterns"
+msgstr "включить файлы, имена которых соответствуют данным шаблонам"
+
+msgid "exclude names matching the given patterns"
+msgstr "исключить файлы, имена которых соответствуют данным шаблонам"
+
+msgid "use text as commit message"
+msgstr "текст комментария к коммиту"
+
+msgid "read commit message from file"
+msgstr "читать журнальные сообщения из файла"
+
+msgid "record the specified date as commit date"
+msgstr "использовать эту дату в качестве даты коммита"
+
+msgid "record the specified user as committer"
+msgstr "использовать этого пользователя как автора коммита"
+
+msgid "STYLE"
+msgstr "СТИЛЬ"
+
+msgid "display using template map file"
+msgstr "отображать с использование файла-карты шаблонов"
+
+msgid "display with template"
+msgstr "отображать с помощью шаблона"
+
+msgid "do not show merges"
+msgstr "не показывать слияния"
+
+msgid "output diffstat-style summary of changes"
+msgstr "отображать сводку изменений в стиле diffstat"
+
+msgid "treat all files as text"
+msgstr "обрабатывать все файлы как текстовые"
+
+msgid "omit dates from diff headers"
+msgstr "опускать даты в заголовках diff'ов"
+
+msgid "show which function each change is in"
+msgstr "для каждого изменения показать, в какой оно сделано функции"
+
+msgid "produce a diff that undoes the changes"
+msgstr "сгенерировать патч, который отменяет изменения"
+
+msgid "ignore white space when comparing lines"
+msgstr "игнорировать пробельные символы при сравнении строк"
+
+msgid "ignore changes in the amount of white space"
+msgstr "игнорировать изменения в количестве пробельных символов"
+
+msgid "ignore changes whose lines are all blank"
+msgstr "игнорировать пустые строки"
+
+msgid "number of lines of context to show"
+msgstr "показываемое количество строк контекста"
+
+msgid "SIMILARITY"
+msgstr "ПОХОЖЕСТЬ"
+
+msgid "guess renamed files by similarity (0<=s<=100)"
+msgstr ""
+"считать файлы переименованными исходя из степени их похожести (от 0 до 100)"
+
+msgid "recurse into subrepositories"
+msgstr "рекурсивно обрабатывать субрепозитории"
+
+msgid "[OPTION]... [FILE]..."
+msgstr "[ПАРАМЕТР]... [ФАЙЛ]..."
+
+msgid "add the specified files on the next commit"
+msgstr "добавить указанный файл при следующем коммите"
+
+msgid ""
+" Schedule files to be version controlled and added to the\n"
+" repository."
+msgstr ""
+" Планирует помещение файлов под контроль версий и\n"
+" добавление их в репозиторий."
+
+msgid ""
+" The files will be added to the repository at the next commit. To\n"
+" undo an add before that, see :hg:`forget`."
+msgstr ""
+" Файлы будут добавлены в репозиторий при следующем коммите. Чтобы\n"
+" отменить добавление до коммита, см. :hg:`forget`."
+
+msgid " If no names are given, add all files to the repository."
+msgstr " Если имена файлов не заданы, в будут добавлены все файлы."
+
+msgid " .. container:: verbose"
+msgstr ""
+
+msgid ""
+" An example showing how new (unknown) files are added\n"
+" automatically by :hg:`add`::"
+msgstr ""
+" Пример, демонстрирующий автоматическое добавление новых\n"
+" (неизвестных) файлов с помощью :hg:`add`::"
+
+msgid ""
+" $ ls\n"
+" foo.c\n"
+" $ hg status\n"
+" ? foo.c\n"
+" $ hg add\n"
+" adding foo.c\n"
+" $ hg status\n"
+" A foo.c"
+msgstr ""
+" $ ls\n"
+" foo.c\n"
+" $ hg status\n"
+" ? foo.c\n"
+" $ hg add\n"
+" adding foo.c\n"
+" $ hg status\n"
+" A foo.c"
+
+msgid ""
+" Returns 0 if all files are successfully added.\n"
+" "
+msgstr ""
+" Возвращает 0, если все файлы были успешно добавлены.\n"
+" "
+
+msgid "add all new files, delete all missing files"
+msgstr "добавить все новые, удалить все отсутвующие файлы"
+
+msgid ""
+" Add all new files and remove all missing files from the\n"
+" repository."
+msgstr ""
+" Добавляет все новые и удаляет все отсутсвующие файлы из\n"
+" репозитория."
+
+msgid ""
+" New files are ignored if they match any of the patterns in\n"
+" ``.hgignore``. As with add, these changes take effect at the next\n"
+" commit."
+msgstr ""
+" Новые файлы игнорируются, если они подходят под любой шаблон\n"
+" в ``.hgignore``. Аналогично команде ``add``, изменения фиксируются\n"
+" при следующем коммите."
+
+msgid ""
+" Use the -s/--similarity option to detect renamed files. With a\n"
+" parameter greater than 0, this compares every removed file with\n"
+" every added file and records those similar enough as renames. This\n"
+" option takes a percentage between 0 (disabled) and 100 (files must\n"
+" be identical) as its parameter. Detecting renamed files this way\n"
+" can be expensive. After using this option, :hg:`status -C` can be\n"
+" used to check which files were identified as moved or renamed."
+msgstr ""
+" Используйте параметр -s/--similarity чтобы найти переименованные\n"
+" файлы. Если этот параметр больше 0, то производится сравнение\n"
+" каждого удаленного файла с каждым добавленным, и если они достаточно\n"
+" похожи, то это фиксируется как переименование. Этот параметр принимает\n"
+" в качестве параметра \"процент похожести\" от 0 (отключено) до 100\n"
+" (файлы дожны быть одинаковыми). Этот способ нахождения\n"
+" переименованных файлов может оказать дорогим. После использования\n"
+" этого параметра можно использовать :hg:`status -C` чтобы проверить,\n"
+" какие файлы были идентифицированы как перемещенные или\n"
+" переименованные."
+
+msgid "similarity must be a number"
+msgstr "параметр \"similarity\" должен быть числом"
+
+msgid "similarity must be between 0 and 100"
+msgstr "параметр similarity должен быть от 0 до 100"
+
+msgid "annotate the specified revision"
+msgstr "аннотировать указанную ревизию"
+
+msgid "follow copies/renames and list the filename (DEPRECATED)"
+msgstr "отслеживать копирования/переименования и писать имя файла (УСТАРЕЛО)"
+
+msgid "don't follow copies and renames"
+msgstr "не отслеживать копирования и перемещения"
+
+msgid "list the author (long with -v)"
+msgstr "писать имя автора (длинный формат с -v)"
+
+msgid "list the filename"
+msgstr "писать имя файла"
+
+msgid "list the date (short with -q)"
+msgstr "писать дату (короткий формат с -q"
+
+msgid "list the revision number (default)"
+msgstr "писать номер ревизии (по умолчанию)"
+
+msgid "list the changeset"
+msgstr "писать набор изменений"
+
+msgid "show line number at the first appearance"
+msgstr "указывать номер строки при первом появлении"
+
+msgid "[-r REV] [-f] [-a] [-u] [-d] [-n] [-c] [-l] FILE..."
+msgstr ""
+
+msgid "show changeset information by line for each file"
+msgstr "информация о наборе изменений построчно для каждого файла"
+
+msgid ""
+" List changes in files, showing the revision id responsible for\n"
+" each line"
+msgstr ""
+" Для каждой строки файла показывает номер ревизии, из которой\n"
+" эта строка взялась"
+
+msgid ""
+" This command is useful for discovering when a change was made and\n"
+" by whom."
+msgstr ""
+" Эта комадна полезна для того чтобы узнать, когда и кем было внесено\n"
+" изменение."
+
+msgid ""
+" Without the -a/--text option, annotate will avoid processing files\n"
+" it detects as binary. With -a, annotate will annotate the file\n"
+" anyway, although the results will probably be neither useful\n"
+" nor desirable."
+msgstr ""
+" Без параметра -a/--test, annotate не будет обрабатывать файлы,\n"
+" которые она считает бинарными. С параметром -a, бинарные файлы\n"
+" также будут аннотированы, хотя как правило это нежелательно и\n"
+" бесполезно."
+
+msgid "at least one filename or pattern is required"
+msgstr "требуется указать как минимум одно имя файла или шаблон"
+
+msgid "at least one of -n/-c is required for -l"
+msgstr "с -l требуется указать хотя бы одно из -n/-c"
+
+#, python-format
+msgid "%s: binary file\n"
+msgstr "%s: бинарный файл\n"
+
+msgid "do not pass files through decoders"
+msgstr "не обрабатывать файлы декодерами"
+
+msgid "directory prefix for files in archive"
+msgstr "префикс каталога для файлов в архиве"
+
+msgid "PREFIX"
+msgstr "ПРЕФИКС"
+
+msgid "revision to distribute"
+msgstr "ревизия для архивирования"
+
+msgid "type of distribution to create"
+msgstr "тип создаваемого архива"
+
+#, fuzzy
+msgid "[OPTION]... DEST"
+msgstr "[ПАРАМЕТР]... [-r] РЕВИЗИЯ"
+
+msgid "create an unversioned archive of a repository revision"
+msgstr "создать неверсированную архивную копию ревизии из репозитория"
+
+msgid ""
+" By default, the revision used is the parent of the working\n"
+" directory; use -r/--rev to specify a different revision."
+msgstr ""
+" По умолчанию используется ревизия, являющаяся родителем рабочего\n"
+" каталога; используйте -r/--rev чтобы указать другую ревизию."
+
+msgid ""
+" The archive type is automatically detected based on file\n"
+" extension (or override using -t/--type)."
+msgstr ""
+" Тип архива выбирается автоматически на основе расширения файла\n"
+" (можно переопределить с помощью -t/--type)."
+
+msgid " Valid types are:"
+msgstr " Допустимые типы:"
+
+msgid ""
+" :``files``: a directory full of files (default)\n"
+" :``tar``: tar archive, uncompressed\n"
+" :``tbz2``: tar archive, compressed using bzip2\n"
+" :``tgz``: tar archive, compressed using gzip\n"
+" :``uzip``: zip archive, uncompressed\n"
+" :``zip``: zip archive, compressed using deflate"
+msgstr ""
+" :``files``: каталог с файлами (по умолчанию)\n"
+" :``tar``: tar-архив, без сжатия\n"
+" :``tbz2``: tar-архив, сжатый bzip2\n"
+" :``tgz``: tar-архив, сжатый gzip\n"
+" :``uzip``: zip-архив, без сжатия\n"
+" :``zip``: zip-архив, сжатый"
+
+msgid ""
+" The exact name of the destination archive or directory is given\n"
+" using a format string; see :hg:`help export` for details."
+msgstr ""
+" Точное имя архива или каталога задается с помощью форматирующей\n"
+" строки; см. :hg:`help export`."
+
+msgid ""
+" Each member added to an archive file has a directory prefix\n"
+" prepended. Use -p/--prefix to specify a format string for the\n"
+" prefix. The default is the basename of the archive, with suffixes\n"
+" removed."
+msgstr ""
+" К каждому элементу архива добавляется префикс в виде имени\n"
+" каталога. Префикс может быть задан в виде форматирующей строки\n"
+" с помощью -p/--prefix. По умолчанию это имя архива с удаленным\n"
+" расширением."
+
+msgid "no working directory: please specify a revision"
+msgstr "нет рабочего каталога: пожалуйста, укажите ревизию"
+
+msgid "repository root cannot be destination"
+msgstr "корень репозитория не может быть назначением"
+
+msgid "cannot archive plain files to stdout"
+msgstr "не могу архивировать обычный каталог в stdout"
+
+#, fuzzy
+msgid "merge with old dirstate parent after backout"
+msgstr "слить со старым родителем после отмены"
+
+msgid "parent to choose when backing out merge"
+msgstr "выбираемая родительская ревизия при отмене слияния"
+
+msgid "revision to backout"
+msgstr "ревизия для отмены"
+
+msgid "[OPTION]... [-r] REV"
+msgstr "[ПАРАМЕТР]... [-r] РЕВИЗИЯ"
+
+msgid "reverse effect of earlier changeset"
+msgstr "отменить эффект более раннего набора изменений"
+
+msgid ""
+" Prepare a new changeset with the effect of REV undone in the\n"
+" current working directory."
+msgstr ""
+" Создает в текущем рабочем каталоге новый набор изменений, который\n"
+" имеет эффект отмены изменений РЕВИЗИИ."
+
+msgid ""
+" If REV is the parent of the working directory, then this new changeset\n"
+" is committed automatically. Otherwise, hg needs to merge the\n"
+" changes and the merged result is left uncommitted."
+msgstr ""
+" Если РЕВИЗИЯ - родитель рабочего каталога, то созданный набор\n"
+" изменений коммитится автоматически. В противном случае Mercurial\n"
+" проводит слияние изменений, результат слияния остается\n"
+" незакоммиченным."
+
+msgid ""
+" By default, the pending changeset will have one parent,\n"
+" maintaining a linear history. With --merge, the pending changeset\n"
+" will instead have two parents: the old parent of the working\n"
+" directory and a new child of REV that simply undoes REV."
+msgstr ""
+" По умолчанию, созданный набор изменений будет иметь одного\n"
+" родителя, что сохраняет линейую история. Если указан --merge,\n"
+" он будет иметь двух родителей: предыдущего родителя рабочего\n"
+" каталога и новую дочернюю ревизию РЕВИЗИИ, которая просто\n"
+" отменяет ее действие."
+
+msgid ""
+" Before version 1.7, the behavior without --merge was equivalent to\n"
+" specifying --merge followed by :hg:`update --clean .` to cancel\n"
+" the merge and leave the child of REV as a head to be merged\n"
+" separately."
+msgstr ""
+" До версии 1.7 поведение без --merge было эквивалентно поведению\n"
+" с --merge с последующим :hg:`update --clean .` с целью отменить\n"
+" слияние и оставить дочернюю ревизию РЕВИЗИИ как голову для\n"
+" для дальнейшего слияния"
+
+msgid "please specify just one revision"
+msgstr "пожалуйста, укажите ровно одну ревизию"
+
+msgid "please specify a revision to backout"
+msgstr "пожалуйста, укажите ревизию для отмены"
+
+msgid "cannot backout change on a different branch"
+msgstr "не могу отменить ревизию на другой ветке"
+
+msgid "cannot backout a change with no parents"
+msgstr "не могу отменить ревизию без родителей"
+
+msgid "cannot backout a merge changeset without --parent"
+msgstr "немогу отменить ревизию слияния без --parent"
+
+#, python-format
+msgid "%s is not a parent of %s"
+msgstr "%s не родитель %s"
+
+msgid "cannot use --parent on non-merge changeset"
+msgstr ""
+"нельзя использовать --parent для ревизии, не являющейся результатом слияния"
+
+#, python-format
+msgid "changeset %s backs out changeset %s\n"
+msgstr "ревизия %s отменяет ревизию %s\n"
+
+#, python-format
+msgid "merging with changeset %s\n"
+msgstr "слияние с ревизией %s\n"
+
+msgid "reset bisect state"
+msgstr "сбросить поиск"
+
+msgid "mark changeset good"
+msgstr "пометить ревизию как хорошую"
+
+msgid "mark changeset bad"
+msgstr "пометить ревизию как плохую"
+
+msgid "skip testing changeset"
+msgstr "пропустить тестирование набора изменений"
+
+msgid "extend the bisect range"
+msgstr "расширить диапазон поиска"
+
+msgid "use command to check changeset state"
+msgstr "использовать команду для проверки состояния набора изменений"
+
+msgid "do not update to target"
+msgstr "не обновляться до целевой ревизии"
+
+msgid "[-gbsr] [-U] [-c CMD] [REV]"
+msgstr "[-gbsr] [-U] [-c КОМАНДА] [РЕВИЗИЯ]"
+
+msgid "subdivision search of changesets"
+msgstr "поиск ревизии методом деления пополам"
+
+msgid ""
+" This command helps to find changesets which introduce problems. To\n"
+" use, mark the earliest changeset you know exhibits the problem as\n"
+" bad, then mark the latest changeset which is free from the problem\n"
+" as good. Bisect will update your working directory to a revision\n"
+" for testing (unless the -U/--noupdate option is specified). Once\n"
+" you have performed tests, mark the working directory as good or\n"
+" bad, and bisect will either update to another candidate changeset\n"
+" or announce that it has found the bad revision."
+msgstr ""
+" Эта команда полезна при поиске ревизии, в которой была внесена\n"
+" ошибка. Для этого самая ранняя ревизия, про которую известно, что\n"
+" она содержит ошибку, помечается как плохая, после чего самая\n"
+" поздняя ревизия, не содержащая эту ошибку, помечается как хорошая.\n"
+" Bisect обновит рабочий каталог до ревизии для тестирования (если\n"
+" не указан -U/--update). После того, как тесты проведены, ревизия\n"
+" помечается как хорошая или плохая в зависимости от результата, и\n"
+" bisect либо обновит каталог до новой ревизии-кандидата, либо\n"
+" объявит, что нашел плохую ревизию."
+
+msgid ""
+" As a shortcut, you can also use the revision argument to mark a\n"
+" revision as good or bad without checking it out first."
+msgstr ""
+" Для краткости можно также использовать номер ревизии в качестве\n"
+" параметра, чтобы пометить ревизию как плохую или хорошую, не\n"
+" обновляя до нее предварительно рабочий каталог."
+
+msgid ""
+" If you supply a command, it will be used for automatic bisection.\n"
+" Its exit status will be used to mark revisions as good or bad:\n"
+" status 0 means good, 125 means to skip the revision, 127\n"
+" (command not found) will abort the bisection, and any other\n"
+" non-zero exit status means the revision is bad."
+msgstr ""
+" Если вы укажите команду, она будет использована для автоматического\n"
+" поиска. Ее код возврата будет использован чтобы пометить ревизию\n"
+" как плохую или хорошую: код 0 - хорошая, код 125 означает пропустить\n"
+" ревизию, 127 (команда не найдена) отменяет поиск, любой другой\n"
+" код возврата означает плохую ревизию."
+
+msgid "The first good revision is:\n"
+msgstr "Первая хорошая ревизия:\n"
+
+msgid "The first bad revision is:\n"
+msgstr "Первая плохая ревизия:\n"
+
+#, python-format
+msgid ""
+"Not all ancestors of this changeset have been checked.\n"
+"Use bisect --extend to continue the bisection from\n"
+"the common ancestor, %s.\n"
+msgstr ""
+"Не все предки этого набора изменений были проверены.\n"
+"Используйте bisect --extend чтобы продолжить поиск\n"
+"от общей родительской ревизии %s.\n"
+
+msgid "Due to skipped revisions, the first good revision could be any of:\n"
+msgstr "Из-за пропущенных ревизий, первой хорошей может быть любая из:\n"
+
+msgid "Due to skipped revisions, the first bad revision could be any of:\n"
+msgstr "Из-за пропущенных ревизий, первой плохой может быть любая из:\n"
+
+msgid "cannot bisect (no known good revisions)"
+msgstr "не могу поделить пополам (нет известных хороших ревизий)"
+
+msgid "cannot bisect (no known bad revisions)"
+msgstr "не могу поделить пополам (нет известных плохих ревизий)"
+
+msgid "(use of 'hg bisect <cmd>' is deprecated)\n"
+msgstr "(использование 'hg bisect <cmd>' устарело)\n"
+
+msgid "incompatible arguments"
+msgstr "несовместимые аргументы"
+
+#, python-format
+msgid "failed to execute %s"
+msgstr "не удалось выполнить %s"
+
+#, python-format
+msgid "%s killed"
+msgstr "%s завершен (killed)"
+
+#, python-format
+msgid "Changeset %d:%s: %s\n"
+msgstr "Набор изменений %d:%s: %s\n"
+
+#, python-format
+msgid "Extending search to changeset %d:%s\n"
+msgstr "Расширяем поиск до ревизии %d:%s\n"
+
+msgid "nothing to extend"
+msgstr "некуда расширять поиск"
+
+#, python-format
+msgid "Testing changeset %d:%s (%d changesets remaining, ~%d tests)\n"
+msgstr "Тестирование ревизии %d:%s (%d ревизий осталось, ~%d тестов)\n"
+
+msgid "force"
+msgstr "принудительно"
+
+msgid "delete a given bookmark"
+msgstr "удалить указанную закладку"
+
+msgid "rename a given bookmark"
+msgstr "переимновать указанную закладку"
+
+msgid "do not mark a new bookmark active"
+msgstr "не помечать новую закладку как активную"
+
+msgid "hg bookmarks [-f] [-d] [-i] [-m NAME] [-r REV] [NAME]"
+msgstr "hg bookmarks [-f] [-d] [-i] [-m ИМЯ] [-r РЕВИЗИЯ] [ИМЯ]"
+
+msgid "track a line of development with movable markers"
+msgstr "отслеживать ветвь разработки с помощью передвигаемых меток"
+
+msgid ""
+" Bookmarks are pointers to certain commits that move when\n"
+" committing. Bookmarks are local. They can be renamed, copied and\n"
+" deleted. It is possible to use bookmark names in :hg:`merge` and\n"
+" :hg:`update` to merge and update respectively to a given bookmark."
+msgstr ""
+" Закладки (bookmarks) - это указатели на некторый коммит, которые\n"
+" перемещаются при коммите. Закладки локальны. Их можно переименовывать\n"
+" копировать и удалять. Можно использовать имя закладки в :hg:`merge`\n"
+" и :hg:`update` для слияния или обновления до заданной закладки\n"
+" соответвенно."
+
+msgid ""
+" You can use :hg:`bookmark NAME` to set a bookmark on the working\n"
+" directory's parent revision with the given name. If you specify\n"
+" a revision using -r REV (where REV may be an existing bookmark),\n"
+" the bookmark is assigned to that revision."
+msgstr ""
+" Используйте :hg:`bookmark ИМЯ` чтобы создать закладку с заданным\n"
+" именем на родительскую ревизию рабочего каталога. Если указывается\n"
+" -r РЕВИЗИЯ (где РЕВИЗИЯ может также быть существующей закладкой),\n"
+" закладка будет указывать на эту ревизию."
+
+msgid ""
+" Bookmarks can be pushed and pulled between repositories (see :hg:`help\n"
+" push` and :hg:`help pull`). This requires both the local and remote\n"
+" repositories to support bookmarks. For versions prior to 1.8, this "
+"means\n"
+" the bookmarks extension must be enabled.\n"
+" "
+msgstr ""
+" Закладки могут передаваться между репозиториями с помощью команд\n"
+" push и pull (см. :hg:`help push` и :hg:`help pull). Для этого\n"
+" необходимо, чтобы удаленный и локальный репозиторий поддерживали\n"
+" закладки. Для Mercurial версий меньше 1.8 это означает, что\n"
+" должно быть включено расширение bookmarks.\n"
+" "
+
+#, python-format
+msgid "bookmark '%s' does not exist"
+msgstr "закладки '%s' не существует"
+
+#, python-format
+msgid "bookmark '%s' already exists (use -f to force)"
+msgstr "закладка '%s' уже существует (-f - принудительно) "
+
+msgid "new bookmark name required"
+msgstr "укажите новое имя закладки"
+
+msgid "bookmark name required"
+msgstr "укажите имя закладки"
+
+msgid "bookmark name cannot contain newlines"
+msgstr "имя закладки не может содержать символ перевода строки"
+
+msgid "bookmark names cannot consist entirely of whitespace"
+msgstr "имя закладки не может состоять из одних пробелов"
+
+msgid "a bookmark cannot have the name of an existing branch"
+msgstr "закладка не может назыаться так же, как существующая ветвь"
+
+msgid "no bookmarks set\n"
+msgstr "нет ни одной закладки\n"
+
+msgid "set branch name even if it shadows an existing branch"
+msgstr "использовать имя ветви, даже если оно скрывает уже существующую ветвь"
+
+msgid "reset branch name to parent branch name"
+msgstr "сбросить имя ветви в имя ветви родителя"
+
+msgid "[-fC] [NAME]"
+msgstr "[-fC] [ИМЯ]"
+
+msgid "set or show the current branch name"
+msgstr "задать или показать имя текущей ветви"
+
+msgid ""
+" With no argument, show the current branch name. With one argument,\n"
+" set the working directory branch name (the branch will not exist\n"
+" in the repository until the next commit). Standard practice\n"
+" recommends that primary development take place on the 'default'\n"
+" branch."
+msgstr ""
+" Без аргументов показывает имя текущей ветви. С одним аргументом\n"
+" задает имя ветви для рабочего каталога (ветвь не будет создана\n"
+" в репозитории до следующего коммита). Рекомендуется вести основную\n"
+" разработку в ветви 'default'."
+
+msgid ""
+" Unless -f/--force is specified, branch will not let you set a\n"
+" branch name that already exists, even if it's inactive."
+msgstr ""
+" Если не указан -f/--force, branch не даст вам задать имя\n"
+" существующей ветви, даже если она не активна."
+
+msgid ""
+" Use -C/--clean to reset the working directory branch to that of\n"
+" the parent of the working directory, negating a previous branch\n"
+" change."
+msgstr ""
+
+msgid ""
+" Use the command :hg:`update` to switch to an existing branch. Use\n"
+" :hg:`commit --close-branch` to mark this branch as closed."
+msgstr ""
+" Используйте команду :hg:`update` чтобы переключиться на существующую\n"
+" ветвь. Используйте :hg:`commit --close-branch` чтобы пометить эту\n"
+" ветвь как закрытую."
+
+#, python-format
+msgid "reset working directory to branch %s\n"
+msgstr "рабочий каталог сброшен на ветвь %s\n"
+
+msgid "a branch of the same name already exists"
+msgstr "ветвь с таким именем уже существует"
+
+#. i18n: "it" refers to an existing branch
+msgid "use 'hg update' to switch to it"
+msgstr "используйте 'hg update' чтобы переключиться на нее"
+
+#, python-format
+msgid "marked working directory as branch %s\n"
+msgstr "рабочий каталог помечен как ветвь %s\n"
+
+msgid "show only branches that have unmerged heads"
+msgstr "показывать только ветви, на которых есть неслитые головы"
+
+msgid "show normal and closed branches"
+msgstr "показывать обычные и закрытые ветви"
+
+msgid "[-ac]"
+msgstr "[-ac]"
+
+msgid "list repository named branches"
+msgstr "перечислить именованные ветки в репозитории"
+
+msgid ""
+" List the repository's named branches, indicating which ones are\n"
+" inactive. If -c/--closed is specified, also list branches which have\n"
+" been marked closed (see :hg:`commit --close-branch`)."
+msgstr ""
+" Перечисляет именованные ветви в репозитории, выделяя активные.\n"
+" Если указан -c/--close, печатает также ветви, помеченные как\n"
+" закрытые (см. :hg:`commit --close-branch`)."
+
+msgid ""
+" If -a/--active is specified, only show active branches. A branch\n"
+" is considered active if it contains repository heads."
+msgstr ""
+" Если укзан -a/--active, показывает только активные ветви. Ветвь\n"
+" считается активной, если она содержит головные ревизии."
+
+msgid " Use the command :hg:`update` to switch to an existing branch."
+msgstr ""
+" Используйте :hg:`update` чтобы переключиться на существующую ветвь."
+
+msgid ""
+" Returns 0.\n"
+" "
+msgstr ""
+" Возвращает 0.\n"
+" "
+
+msgid " (closed)"
+msgstr " (закрыта)"
+
+msgid " (inactive)"
+msgstr " (неактивна)"
+
+msgid "run even when the destination is unrelated"
+msgstr "работать даже если репозиторий не связан с репозиторием назначения"
+
+msgid "a changeset intended to be added to the destination"
+msgstr "набор изменений для добавления в репозиторий назначения"
+
+msgid "a specific branch you would like to bundle"
+msgstr "ветвь для упаковки"
+
+msgid "a base changeset assumed to be available at the destination"
+msgstr ""
+"базовый набор изменений, который предполагается доступным в репозитории "
+"назначения"
+
+msgid "bundle all changesets in the repository"
+msgstr "упаковать все ревизии в репозитории"
+
+msgid "bundle compression type to use"
+msgstr "тип сжатия"
+
+msgid "[-f] [-t TYPE] [-a] [-r REV]... [--base REV]... FILE [DEST]"
+msgstr "[-f] [-t ТИП] [-a] [-r РЕВИЗИЯ]... [--base РЕВИЗИЯ]... ФАЙЛ [НАЗН]"
+
+msgid "create a changegroup file"
+msgstr "создать файл с группой наборов изменений"
+
+msgid ""
+" Generate a compressed changegroup file collecting changesets not\n"
+" known to be in another repository."
+msgstr ""
+" Создает сжатый файл, содержащий группу наборов изменений, которые\n"
+" отсутсвуют в другом репозитории."
+
+msgid ""
+" If you omit the destination repository, then hg assumes the\n"
+" destination will have all the nodes you specify with --base\n"
+" parameters. To create a bundle containing all changesets, use\n"
+" -a/--all (or --base null)."
+msgstr ""
+" Если репозиторий назначения опущен, то Mercurial предполагает,\n"
+" что там имеются все ревизии, до указанной в --base. Чтобы создать\n"
+" файл, содержащий все наборы изменений, используйте -a/--all\n"
+" (или --base null)."
+
+msgid ""
+" You can change compression method with the -t/--type option.\n"
+" The available compression methods are: none, bzip2, and\n"
+" gzip (by default, bundles are compressed using bzip2)."
+msgstr ""
+" Способ сжатия можно задать с помощью параметра -t/--type.\n"
+" Доступные методы сжатия: без сжатия (none), bzip2, gzip\n"
+" (по умолчанию используется bzip2)."
+
+msgid ""
+" The bundle file can then be transferred using conventional means\n"
+" and applied to another repository with the unbundle or pull\n"
+" command. This is useful when direct push and pull are not\n"
+" available or when exporting an entire repository is undesirable."
+msgstr ""
+" Файл с группой изменений (bundle) может быть передан обычными\n"
+" средствами, или применен в другом репозитории с помощью команд\n"
+" unbundle или pull. Это полезно когда команды push и pull напрямую\n"
+" недоступны или когда пулбликация всего репозитория нежелательна."
+
+msgid ""
+" Applying bundles preserves all changeset contents including\n"
+" permissions, copy/rename information, and revision history."
+msgstr ""
+" Применение групп изменений сохраняет все аттрибуты наборов\n"
+" изменений, включая права доступа, информацию о копировании/\n"
+" переименовании и историю ревизий."
+
+msgid ""
+" Returns 0 on success, 1 if no changes found.\n"
+" "
+msgstr ""
+" Возвращает 0 в случае успеха, 1 если изменения не найдены\n"
+" "
+
+msgid "--base is incompatible with specifying a destination"
+msgstr "нельзя одновременно указывать --base и репозиторий назначения"
+
+msgid "unknown bundle type specified with --type"
+msgstr "неизвестный способ задан в --type"
+
+msgid "print output to file with formatted name"
+msgstr "печатать в файл с именем согласно ФОРМАТУ"
+
+msgid "print the given revision"
+msgstr "напечатать заданную ревизию"
+
+msgid "apply any matching decode filter"
+msgstr "декодировать любым подходящим фильтром"
+
+msgid "[OPTION]... FILE..."
+msgstr "[ПАРАМЕТР]... ФАЙЛ..."
+
+msgid "output the current or given revision of files"
+msgstr "напечатать текущую или заданную ревизию файлов"
+
+msgid ""
+" Print the specified files as they were at the given revision. If\n"
+" no revision is given, the parent of the working directory is used,\n"
+" or tip if no revision is checked out."
+msgstr ""
+" Печатает содержимое указанных файлов, каким оно бало на момент\n"
+" указанной ревизии. Если невизия не указана, используется\n"
+" родительская ревизия рабочего каталога или вершина (tip), если\n"
+" работий каталог пуст."
+
+msgid ""
+" Output may be to a file, in which case the name of the file is\n"
+" given using a format string. The formatting rules are the same as\n"
+" for the export command, with the following additions:"
+msgstr ""
+" Можно печатать в файл, в этом случае его имя задается в виде\n"
+" форматирущей строки. Формат строки такой же, как в команде export,\n"
+" со следующими дополнениями:"
+
+msgid ""
+" :``%s``: basename of file being printed\n"
+" :``%d``: dirname of file being printed, or '.' if in repository root\n"
+" :``%p``: root-relative path name of file being printed"
+msgstr ""
+" :``%s``: базовое имя печатаемого файла\n"
+" :``%d``: имя каталога печатаемого файла или '.', если файл в корне\n"
+" :``%p``: путь к печатаемому файлу относительно корня репозитория"
+
+msgid "the clone will include an empty working copy (only a repository)"
+msgstr "клон будет включать пустой рабочий каталог (только репозиторий)"
+
+msgid "revision, tag or branch to check out"
+msgstr "ревизия, метка или ветвь на которую обновиться"
+
+msgid "include the specified changeset"
+msgstr "включить указанный набор изменений"
+
+msgid "clone only the specified branch"
+msgstr "клонировать только указанную ветвь"
+
+msgid "[OPTION]... SOURCE [DEST]"
+msgstr "[ПАРАМЕТР]... ИСТОЧНИК [НАЗН]"
+
+msgid "make a copy of an existing repository"
+msgstr "создать копию существующего репозитория"
+
+msgid " Create a copy of an existing repository in a new directory."
+msgstr " Создает копию существующего репозитория в новом каталоге."
+
+msgid ""
+" If no destination directory name is specified, it defaults to the\n"
+" basename of the source."
+msgstr ""
+" Если директорий назначения не задан, используется имя базового\n"
+" каталога источника."
+
+msgid ""
+" The location of the source is added to the new repository's\n"
+" ``.hg/hgrc`` file, as the default to be used for future pulls."
+msgstr ""
+" Адрес источника добавляется в файл ``.hg/hgrc`` нового репозитория,\n"
+" и используется по умолчанию для последующих pull'ов и push'ей."
+
+msgid " See :hg:`help urls` for valid source format details."
+msgstr " См. :hg:`help urls` о форматах адреса источника."
+
+msgid ""
+" It is possible to specify an ``ssh://`` URL as the destination, but no\n"
+" ``.hg/hgrc`` and working directory will be created on the remote side.\n"
+" Please see :hg:`help urls` for important details about ``ssh://`` URLs."
+msgstr ""
+" Можно указать ``ssh://...`` в качестве адреса назначения, но файл\n"
+" ``.hg/hgrc`` и рабочая копия не будут созданы на удаленном компьютере.\n"
+" См. :hg:`help urls` для важной информации об адресах вида ``ssh://...``."
+
+msgid ""
+" A set of changesets (tags, or branch names) to pull may be specified\n"
+" by listing each changeset (tag, or branch name) with -r/--rev.\n"
+" If -r/--rev is used, the cloned repository will contain only a subset\n"
+" of the changesets of the source repository. Only the set of changesets\n"
+" defined by all -r/--rev options (including all their ancestors)\n"
+" will be pulled into the destination repository.\n"
+" No subsequent changesets (including subsequent tags) will be present\n"
+" in the destination."
+msgstr ""
+" Копируемые наборы изменений (changesets) (как метки или имена ветвей)\n"
+" могут быть заданы указанием каждого набора изменений (метки или имени\n"
+" ветви) с помощью -r/--rev. При использовании -r/--rev, клонированный\n"
+" репозиторий будет содержать только подмножество наборов изменений\n"
+" источника."
+
+msgid ""
+" Using -r/--rev (or 'clone src#rev dest') implies --pull, even for\n"
+" local source repositories."
+msgstr ""
+" Использование -r/--rev (или 'clone источник#ревизия назн')\n"
+" предполагает --pull, даже если источник локален."
+
+msgid ""
+" For efficiency, hardlinks are used for cloning whenever the source\n"
+" and destination are on the same filesystem (note this applies only\n"
+" to the repository data, not to the working directory). Some\n"
+" filesystems, such as AFS, implement hardlinking incorrectly, but\n"
+" do not report errors. In these cases, use the --pull option to\n"
+" avoid hardlinking."
+msgstr ""
+" Для эффективности, при клонировании источника на одной файловой\n"
+" системе с целевым репозиторием, используются жесткие ссылки (это\n"
+" относится только к данным репозитория, не рабочему каталогу).\n"
+" Некоторые файловые системы, например, AFS, некорректно реализуют\n"
+" жесткие ссылки, но не сообщают об ошибках. В этом случае используйте\n"
+" --pull чтобы избежать жестких ссылок."
+
+msgid ""
+" In some cases, you can clone repositories and the working directory\n"
+" using full hardlinks with ::"
+msgstr ""
+" В некоторых случаях можно клонировать репозитории и рабочие\n"
+" каталоги целиком жесткими ссылками ::"
+
+msgid " $ cp -al REPO REPOCLONE"
+msgstr " $ cp -al РЕПОЗИТОРИЙ КЛОН"
+
+msgid ""
+" This is the fastest way to clone, but it is not always safe. The\n"
+" operation is not atomic (making sure REPO is not modified during\n"
+" the operation is up to you) and you have to make sure your editor\n"
+" breaks hardlinks (Emacs and most Linux Kernel tools do so). Also,\n"
+" this is not compatible with certain extensions that place their\n"
+" metadata under the .hg directory, such as mq."
+msgstr ""
+" Это самый быстрый способ клонирования, но он не всегда безопасен.\n"
+" Эта операция не атомарна (вам надо следить за тем, что РЕПОЗИТОРИЙ\n"
+" не изменяется в процессе копирования), и вам надо убедиться, что\n"
+" ваш редактор умеет разрывать жесткие ссылки (Emacs и большинство\n"
+" инструментов разработчика ядра Linux умеют). Этот способ также\n"
+" не совместим с некоторыми расширениями, которые хранят свои\n"
+" метаданные в каталоге .hg, как mq."
+
+msgid ""
+" Mercurial will update the working directory to the first applicable\n"
+" revision from this list:"
+msgstr ""
+" Mercurial обновит рабочий каталог до первой подходящей ревизии по\n"
+" списку:"
+
+msgid ""
+" a) null if -U or the source repository has no changesets\n"
+" b) if -u . and the source repository is local, the first parent of\n"
+" the source repository's working directory\n"
+" c) the changeset specified with -u (if a branch name, this means the\n"
+" latest head of that branch)\n"
+" d) the changeset specified with -r\n"
+" e) the tipmost head specified with -b\n"
+" f) the tipmost head specified with the url#branch source syntax\n"
+" g) the tipmost head of the default branch\n"
+" h) tip"
+msgstr ""
+" а) пустой каталог, если в источнике нет наборов изменений или указан -U\n"
+" б) если указан -u . и источник локален, до первого родителя рабочей "
+"копии\n"
+" источника\n"
+" в) ревизия, указанная в -u (если это имя ветви, то до головной ревизии\n"
+" этой ветви)\n"
+" г) до ревизии, укзанной с помощью -r\n"
+" д) до последней ревизии указанной в -b\n"
+" е) до последней ревизии указанной как url#ветвь\n"
+" ж) до последней ревизии ветви default\n"
+" з) до последней ревизии"
+
+msgid "cannot specify both --noupdate and --updaterev"
+msgstr "нельзя указывать --noupdate и --updaterev одновременно"
+
+msgid "mark new/missing files as added/removed before committing"
+msgstr ""
+"пометить новые/недостающие файлы как добавленные/удаленные перед коммитом"
+
+msgid "mark a branch as closed, hiding it from the branch list"
+msgstr "пометить ветвь как закрытую, скрыть ее из списка ветвей"
+
+msgid "commit the specified files or all outstanding changes"
+msgstr "зафиксировать указанные файлы или все изменения в репозитории"
+
+msgid ""
+" Commit changes to the given files into the repository. Unlike a\n"
+" centralized SCM, this operation is a local operation. See\n"
+" :hg:`push` for a way to actively distribute your changes."
+msgstr ""
+" Зафиксировать (закоммитить) указанные файлы в репозитории. В\n"
+" отличие от централизованных SCM, это локальная операция. См.\n"
+" :hg:`push` чтобы узнать, как опубликовать свои изменения."
+
+msgid ""
+" If a list of files is omitted, all changes reported by :hg:`status`\n"
+" will be committed."
+msgstr ""
+" Если список файлов опущен, будут закоммичены все изменения, которые\n"
+" показывает :hg:`status`."
+
+msgid ""
+" If you are committing the result of a merge, do not provide any\n"
+" filenames or -I/-X filters."
+msgstr ""
+" Если вы коммитите результат слияния, не указывайте никаких\n"
+" файлов или фильтров в -I/-X."
+
+msgid ""
+" If no commit message is specified, Mercurial starts your\n"
+" configured editor where you can enter a message. In case your\n"
+" commit fails, you will find a backup of your message in\n"
+" ``.hg/last-message.txt``."
+msgstr ""
+" Если не указан комментарий к коммиту, Mercurial запустит ваш\n"
+" настроенный редактор, где можно ввести комментарий. Если при\n"
+" коммите случается сбой, копию сообщения можно найти в \n"
+" ``.hg/last-message.txt``."
+
+msgid ""
+" Returns 0 on success, 1 if nothing changed.\n"
+" "
+msgstr ""
+" Возвращает 0 при успехе, 1 если изменения не зафиксированы.\n"
+" "
+
+msgid "can only close branch heads"
+msgstr "можно закрыть только головную ревизию ветви"
+
+#, python-format
+msgid "nothing changed (%d missing files, see 'hg status')\n"
+msgstr "нет изменений (%d файлов отсутсвует, см. 'hg status')\n"
+
+msgid "nothing changed\n"
+msgstr "нет изменений\n"
+
+msgid "created new head\n"
+msgstr "создана новая голова\n"
+
+#, python-format
+msgid "reopening closed branch head %d\n"
+msgstr "повторно открываю головную ревизию %d закрытой ветви\n"
+
+#, python-format
+msgid "committed changeset %d:%s\n"
+msgstr "зафиксирован набор изменений %d:%s\n"
+
+msgid "record a copy that has already occurred"
+msgstr "записать копирование, которое было проведено ранее"
+
+msgid "forcibly copy over an existing managed file"
+msgstr "перезаписывать существующие контролируемые файлы"
+
+msgid "[OPTION]... [SOURCE]... DEST"
+msgstr "[ПАРАМЕТР]... [ИСТОЧНИК]... НАЗН"
+
+msgid "mark files as copied for the next commit"
+msgstr "пометить файл как скопированный при следующем коммите"
+
+msgid ""
+" Mark dest as having copies of source files. If dest is a\n"
+" directory, copies are put in that directory. If dest is a file,\n"
+" the source must be a single file."
+msgstr ""
+" Помечает НАЗН как копию источника. Если НАЗН - директория,\n"
+" копии помещаются туда. Если НАЗН - файл, источник должен\n"
+" быть одним файлом."
+
+msgid ""
+" By default, this command copies the contents of files as they\n"
+" exist in the working directory. If invoked with -A/--after, the\n"
+" operation is recorded, but no copying is performed."
+msgstr ""
+" По умолчанию эта команда копирует содержимое файлов в том виде,\n"
+" как они существуют в рабочем каталоге. Если указан -A/--after,\n"
+" операция регистрируется, но копирования не производится."
+
+msgid ""
+" This command takes effect with the next commit. To undo a copy\n"
+" before that, see :hg:`revert`."
+msgstr ""
+" Эффект этой команды фиксируется при следующем коммите. Чтобы\n"
+" отменить копирование, см. :hg:`revert`."
+
+msgid ""
+" Returns 0 on success, 1 if errors are encountered.\n"
+" "
+msgstr ""
+" Возвращает 0 при успехе, 1 при ошибке.\n"
+" "
+
+msgid "[INDEX] REV1 REV2"
+msgstr "[СПИСОК] РЕВИЗИЯ1 РЕВИЗИЯ2"
+
+msgid "find the ancestor revision of two revisions in a given index"
+msgstr "найти родительскую ревизию двух ревизий в указанном списке"
+
+msgid "either two or three arguments required"
+msgstr "требуются два или три аргумента"
+
+msgid "add single file mergeable changes"
+msgstr ""
+
+msgid "add single file all revs overwrite"
+msgstr ""
+
+msgid "add new file at each rev"
+msgstr ""
+
+msgid "[OPTION]... [TEXT]"
+msgstr "[ПАРАМЕТР]... [ТЕКСТ]..."
+
+msgid "builds a repo with a given DAG from scratch in the current empty repo"
+msgstr ""
+
+msgid ""
+" The description of the DAG is read from stdin if not given on the\n"
+" command line."
+msgstr ""
+
+msgid " Elements:"
+msgstr ""
+
+msgid ""
+" - \"+n\" is a linear run of n nodes based on the current default "
+"parent\n"
+" - \".\" is a single node based on the current default parent\n"
+" - \"$\" resets the default parent to null (implied at the start);\n"
+" otherwise the default parent is always the last node created\n"
+" - \"<p\" sets the default parent to the backref p\n"
+" - \"*p\" is a fork at parent p, which is a backref\n"
+" - \"*p1/p2\" is a merge of parents p1 and p2, which are backrefs\n"
+" - \"/p2\" is a merge of the preceding node and p2\n"
+" - \":tag\" defines a local tag for the preceding node\n"
+" - \"@branch\" sets the named branch for subsequent nodes\n"
+" - \"#...\\n\" is a comment up to the end of the line"
+msgstr ""
+
+msgid " Whitespace between the above elements is ignored."
+msgstr ""
+
+msgid " A backref is either"
+msgstr ""
+
+msgid ""
+" - a number n, which references the node curr-n, where curr is the "
+"current\n"
+" node, or\n"
+" - the name of a local tag you placed earlier using \":tag\", or\n"
+" - empty to denote the default parent."
+msgstr ""
+
+msgid ""
+" All string valued-elements are either strictly alphanumeric, or must\n"
+" be enclosed in double quotes (\"...\"), with \"\\\" as escape "
+"character.\n"
+" "
+msgstr ""
+
+msgid "reading DAG from stdin\n"
+msgstr ""
+
+msgid "repository is not empty"
+msgstr ""
+
+msgid "building"
+msgstr ""
+
+msgid "show all details"
+msgstr ""
+
+msgid "lists the contents of a bundle"
+msgstr ""
+
+msgid "validate the correctness of the current dirstate"
+msgstr ""
+
+#, python-format
+msgid "%s in state %s, but not in manifest1\n"
+msgstr ""
+
+#, python-format
+msgid "%s in state %s, but also in manifest1\n"
+msgstr ""
+
+#, python-format
+msgid "%s in state %s, but not in either manifest\n"
+msgstr ""
+
+#, python-format
+msgid "%s in manifest1, but listed as state %s"
+msgstr ""
+
+msgid ".hg/dirstate inconsistent with current parent's manifest"
+msgstr ""
+
+msgid "[COMMAND]"
+msgstr ""
+
+msgid "list all available commands and options"
+msgstr ""
+
+msgid "show the command options"
+msgstr "показать параметры команды"
+
+msgid "[-o] CMD"
+msgstr "[-o] КОМАНДА"
+
+msgid "returns the completion list associated with the given command"
+msgstr ""
+
+msgid "use tags as labels"
+msgstr ""
+
+msgid "annotate with branch names"
+msgstr ""
+
+msgid "use dots for runs"
+msgstr ""
+
+msgid "separate elements by spaces"
+msgstr ""
+
+msgid "[OPTION]... [FILE [REV]...]"
+msgstr ""
+
+msgid "format the changelog or an index DAG as a concise textual description"
+msgstr ""
+
+msgid ""
+" If you pass a revlog index, the revlog's DAG is emitted. If you list\n"
+" revision numbers, they get labelled in the output as rN."
+msgstr ""
+
+msgid ""
+" Otherwise, the changelog DAG of the current repo is emitted.\n"
+" "
+msgstr ""
+
+msgid "need repo for changelog dag"
+msgstr ""
+
+#, fuzzy
+msgid "open changelog"
+msgstr "открыть журнал изменений"
+
+msgid "open manifest"
+msgstr ""
+
+msgid "-c|-m|FILE REV"
+msgstr ""
+
+msgid "dump the contents of a data file revision"
+msgstr ""
+
+#, python-format
+msgid "invalid revision identifier %s"
+msgstr ""
+
+msgid "try extended date formats"
+msgstr ""
+
+msgid "[-e] DATE [RANGE]"
+msgstr ""
+
+msgid "parse and display a date"
+msgstr ""
+
+msgid "use old-style discovery"
+msgstr ""
+
+msgid "use old-style discovery with non-heads included"
+msgstr ""
+
+msgid "[-l REV] [-r REV] [-b BRANCH]... [OTHER]"
+msgstr ""
+
+msgid "runs the changeset discovery protocol in isolation"
+msgstr ""
+
+msgid "[PATH]"
+msgstr ""
+
+msgid "show information detected about current filesystem"
+msgstr ""
+
+msgid "id of head node"
+msgstr ""
+
+msgid "id of common node"
+msgstr ""
+
+msgid "REPO FILE [-H|-C ID]..."
+msgstr ""
+
+msgid "retrieves a bundle from a repo"
+msgstr ""
+
+msgid ""
+" Every ID must be a full-length hex node id string. Saves the bundle to "
+"the\n"
+" given file.\n"
+" "
+msgstr ""
+
+msgid "display the combined ignore pattern"
+msgstr ""
+
+msgid "no ignore patterns found"
+msgstr ""
+
+msgid "revlog format"
+msgstr ""
+
+msgid "[-f FORMAT] -c|-m|FILE"
+msgstr ""
+
+msgid "dump the contents of an index file"
+msgstr ""
+
+#, python-format
+msgid "unknown format %d"
+msgstr ""
+
+msgid "dump an index DAG as a graphviz dot file"
+msgstr ""
+
+msgid "test Mercurial installation"
+msgstr ""
+
+#, python-format
+msgid "Checking encoding (%s)...\n"
+msgstr ""
+
+msgid " (check that your locale is properly set)\n"
+msgstr ""
+
+#, python-format
+msgid "Checking installed modules (%s)...\n"
+msgstr ""
+
+msgid " One or more extensions could not be found"
+msgstr ""
+
+msgid " (check that you compiled the extensions)\n"
+msgstr ""
+
+msgid "Checking templates...\n"
+msgstr ""
+
+msgid " (templates seem to have been installed incorrectly)\n"
+msgstr ""
+
+msgid "Checking commit editor...\n"
+msgstr ""
+
+msgid " No commit editor set and can't find vi in PATH\n"
+msgstr ""
+
+msgid " (specify a commit editor in your configuration file)\n"
+msgstr ""
+
+#, python-format
+msgid " Can't find editor '%s' in PATH\n"
+msgstr ""
+
+msgid "Checking username...\n"
+msgstr ""
+
+msgid " (specify a username in your configuration file)\n"
+msgstr ""
+
+msgid "No problems detected\n"
+msgstr ""
+
+#, python-format
+msgid "%s problems detected, please check your install!\n"
+msgstr ""
+
+msgid "REPO ID..."
+msgstr ""
+
+msgid "test whether node ids are known to a repo"
+msgstr ""
+
+msgid ""
+" Every ID must be a full-length hex node id string. Returns a list of 0s "
+"and 1s\n"
+" indicating unknown/known.\n"
+" "
+msgstr ""
+
+msgid "REPO NAMESPACE [KEY OLD NEW]"
+msgstr ""
+
+msgid "access the pushkey key/value protocol"
+msgstr ""
+
+msgid " With two args, list the keys in the given namespace."
+msgstr ""
+
+msgid ""
+" With five args, set a key to new if it currently is set to old.\n"
+" Reports success or failure.\n"
+" "
+msgstr ""
+
+msgid "revision to rebuild to"
+msgstr ""
+
+msgid "[-r REV] [REV]"
+msgstr ""
+
+msgid "rebuild the dirstate as it would look like for the given revision"
+msgstr ""
+
+msgid "revision to debug"
+msgstr ""
+
+msgid "[-r REV] FILE"
+msgstr ""
+
+msgid "dump rename information"
+msgstr ""
+
+#, python-format
+msgid "%s renamed from %s:%s\n"
+msgstr ""
+
+#, python-format
+msgid "%s not renamed\n"
+msgstr ""
+
+msgid "dump index data"
+msgstr ""
+
+msgid "-c|-m|FILE"
+msgstr ""
+
+msgid "show data and statistics about a revlog"
+msgstr ""
+
+msgid "parse and apply a revision specification"
+msgstr ""
+
+msgid "REV1 [REV2]"
+msgstr ""
+
+msgid "manually set the parents of the current working directory"
+msgstr ""
+
+msgid ""
+" This is useful for writing repository conversion tools, but should\n"
+" be used with care."
+msgstr ""
+
+msgid "do not display the saved mtime"
+msgstr ""
+
+msgid "sort by saved mtime"
+msgstr ""
+
+msgid "[OPTION]..."
+msgstr ""
+
+msgid "show the contents of the current dirstate"
+msgstr ""
+
+#, python-format
+msgid "copy: %s -> %s\n"
+msgstr ""
+
+msgid "revision to check"
+msgstr ""
+
+msgid "show how files match on given patterns"
+msgstr ""
+
+msgid "REPO [OPTIONS]... [ONE [TWO]]"
+msgstr ""
+
+msgid "[OPTION]... ([-c REV] | [-r REV1 [-r REV2]]) [FILE]..."
+msgstr "[ПАРАМЕТР]... ([-c РЕВИЗИЯ] | [-r РЕВИЗИЯ1 [-r РЕВИЗИЯ2]]) [ФАЙЛ]..."
+
+msgid "diff repository (or selected files)"
+msgstr "показать изменения в репозитории (или выбранных файлах)"
+
+msgid " Show differences between revisions for the specified files."
+msgstr " Показывает отличия между ревизиями указанных файлов."
+
+msgid " Differences between files are shown using the unified diff format."
+msgstr " Различия показываются в унифицировнном формате diff."
+
+msgid ""
+" .. note::\n"
+" diff may generate unexpected results for merges, as it will\n"
+" default to comparing against the working directory's first\n"
+" parent changeset if no revisions are specified."
+msgstr ""
+" .. note::\n"
+" diff может генерировать неожиданные результаты для слияний,\n"
+" поскольку по умолчанию сравнивнение производится с первым\n"
+" родителем рабочего каталога, если не указаны другие ревизии."
+
+msgid ""
+" Alternatively you can specify -c/--change with a revision to see\n"
+" the changes in that changeset relative to its first parent."
+msgstr ""
+" Можно также указать -c/--change чтобы посмотреть изменения\n"
+" в этой ревизии относительно ее первой родительской ревизии."
+
+msgid ""
+" Without the -a/--text option, diff will avoid generating diffs of\n"
+" files it detects as binary. With -a, diff will generate a diff\n"
+" anyway, probably with undesirable results."
+msgstr ""
+" Без -a/--text, diff не будет генерировать отличия для файлов,\n"
+" которые посчитает бинарными. С -а, будет генерировать для всех\n"
+" файлов, возможно с нежелательными результатами."
+
+msgid ""
+" Use the -g/--git option to generate diffs in the git extended diff\n"
+" format. For more information, read :hg:`help diffs`."
+msgstr ""
+" Исполльзуйте -g/--git чтобы генерировать отличися в расширенном\n"
+" формате git. Подробнее см. :hg:`help diffs`."
+
+msgid "diff against the second parent"
+msgstr "отличия от второй родительской ревизии"
+
+msgid "revisions to export"
+msgstr "ревизии для экспортирования"
+
+msgid "[OPTION]... [-o OUTFILESPEC] REV..."
+msgstr "[ПАРАМЕТР]... [-o OUTFILESPEC] РЕВИЗИЯ..."
+
+#, fuzzy
+msgid "dump the header and diffs for one or more changesets"
+msgstr "сохранить заголовки и отличия для одного или более набора изменений"
+
+msgid " Print the changeset header and diffs for one or more revisions."
+msgstr ""
+" Печатает заголовок набора изменений и отличия для одной или\n"
+" более ревизии."
+
+msgid ""
+" The information shown in the changeset header is: author, date,\n"
+" branch name (if non-default), changeset hash, parent(s) and commit\n"
+" comment."
+msgstr ""
+" В заголовке набора изменений содержится следующая информация:\n"
+" автор, дата, имя ветви (если не default), хэш набора изменений,\n"
+" родитель (родители) и комментарий к коммиту."
+
+msgid ""
+" .. note::\n"
+" export may generate unexpected diff output for merge\n"
+" changesets, as it will compare the merge changeset against its\n"
+" first parent only."
+msgstr ""
+" .. note::\n"
+" export может генерировать неожиданный вывод diff для ревизий\n"
+" слияния, потому что сравнение такой ревизии проводится только\n"
+" с ее первой родительской ревизией."
+
+msgid ""
+" Output may be to a file, in which case the name of the file is\n"
+" given using a format string. The formatting rules are as follows:"
+msgstr ""
+" Можно осуществлять вывод в файл, при этом имя файла задается\n"
+" в виде форматирующей строки. Правила форматирования:"
+
+msgid ""
+" :``%%``: literal \"%\" character\n"
+" :``%H``: changeset hash (40 hexadecimal digits)\n"
+" :``%N``: number of patches being generated\n"
+" :``%R``: changeset revision number\n"
+" :``%b``: basename of the exporting repository\n"
+" :``%h``: short-form changeset hash (12 hexadecimal digits)\n"
+" :``%n``: zero-padded sequence number, starting at 1\n"
+" :``%r``: zero-padded changeset revision number"
+msgstr ""
+" :``%%``: символ \"%\"\n"
+" :``%H``: хэш набора изменений (40 шестнадцатеричных цифр)\n"
+" :``%N``: количество сгенерированных патчей\n"
+" :``%R``: номер ревизии набора изменений\n"
+" :``%b``: базовое имя экспортируемого репозитория\n"
+" :``%h``: короткий хэш набора изменений (12 шестнадцатеричных цифр)\n"
+" :``%n``: выровненный нулями последовательный номер, начиная с 1\n"
+" :``%r``: выровненный нулями номер ревизии"
+
+msgid ""
+" Without the -a/--text option, export will avoid generating diffs\n"
+" of files it detects as binary. With -a, export will generate a\n"
+" diff anyway, probably with undesirable results."
+msgstr ""
+" Без -a/--text, export не будет генерировать diff'ы для файлов,\n"
+" которые он считает бинарными. С -а diff'ы будут сгенерированы\n"
+" для всех файлов, часто с нежелательными результатами."
+
+msgid ""
+" Use the -g/--git option to generate diffs in the git extended diff\n"
+" format. See :hg:`help diffs` for more information."
+msgstr ""
+" Используйте -g/--git чтобы сгенерировать diff'ы в расширенном\n"
+" формате git. Подробнее см. :hg:`help diffs`."
+
+msgid ""
+" With the --switch-parent option, the diff will be against the\n"
+" second parent. It can be useful to review a merge."
+msgstr ""
+" Если указан --switch-parent, будут генерироваться отличия от\n"
+" второго родителя. Это может быть полезно при анализе слияния."
+
+msgid "export requires at least one changeset"
+msgstr "для экспорта требуется хотя бы один набор изменений"
+
+msgid "exporting patches:\n"
+msgstr "экспортируемые патчи:\n"
+
+msgid "exporting patch:\n"
+msgstr "экспортируемый патч:\n"
+
+msgid "forget the specified files on the next commit"
+msgstr "забыть указанные файлы при следующем коммите"
+
+msgid ""
+" Mark the specified files so they will no longer be tracked\n"
+" after the next commit."
+msgstr ""
+" Помечает указанные файлы, чтобы перестать их отслеживать\n"
+" при следующем коммите."
+
+msgid ""
+" This only removes files from the current branch, not from the\n"
+" entire project history, and it does not delete them from the\n"
+" working directory."
+msgstr ""
+" Это удаляет файлы только из текущей ветви, а не из всего\n"
+" репозитория, и не удаляет их из рабочего каталога."
+
+msgid " To undo a forget before the next commit, see :hg:`add`."
+msgstr ""
+" Чтобы отменить действие forget до следующего коммита\n"
+" см. :hg:`add`."
+
+msgid "no files specified"
+msgstr "не задано ни одного файла"
+
+#, python-format
+msgid "not removing %s: file is already untracked\n"
+msgstr "%s не удален, он и так не отслеживается\n"
+
+#, python-format
+msgid "removing %s\n"
+msgstr "удаляю %s\n"
+
+msgid "end fields with NUL"
+msgstr "заканчивать поля символом NUL"
+
+msgid "print all revisions that match"
+msgstr "печатать все подходящие ревизии"
+
+msgid "follow changeset history, or file history across copies and renames"
+msgstr ""
+"следовать истории набора изменений или истории файла при копированиях/"
+"переименованиях"
+
+msgid "ignore case when matching"
+msgstr "игнорировать регистр букв"
+
+msgid "print only filenames and revisions that match"
+msgstr "печатать только имена совпадающих файлов и ревизий"
+
+msgid "print matching line numbers"
+msgstr "печатать номера строк"
+
+msgid "only search files changed within revision range"
+msgstr "искать только файлы, измененные в указанном диапазоне ревизий"
+
+msgid "[OPTION]... PATTERN [FILE]..."
+msgstr "[ПАРАМЕТР]... ШАБЛОН [ФАЙЛ]..."
+
+msgid "search for a pattern in specified files and revisions"
+msgstr "искать шаблон в указанных файлах и ревизиях"
+
+msgid " Search revisions of files for a regular expression."
+msgstr " Ищет регулярное выражение в указанных ревизиях файлов."
+
+msgid ""
+" This command behaves differently than Unix grep. It only accepts\n"
+" Python/Perl regexps. It searches repository history, not the\n"
+" working directory. It always prints the revision number in which a\n"
+" match appears."
+msgstr ""
+" Команда ведет себя не так, как grep в Unix. Она принимает\n"
+" регулярные выражения Python/Perl. Ищет в истории репозитория,\n"
+" а не в рабочем каталоге. Она всегда печатает номер ревизии,\n"
+" в ктором находит совпадение."
+
+msgid ""
+" By default, grep only prints output for the first revision of a\n"
+" file in which it finds a match. To get it to print every revision\n"
+" that contains a change in match status (\"-\" for a match that\n"
+" becomes a non-match, or \"+\" for a non-match that becomes a match),\n"
+" use the --all flag."
+msgstr ""
+" По умолчанию печатается только вывод для первой ревизии файла,\n"
+" в которой найдено совпадение. Чтобы напечатать все ревизии, в которых\n"
+" меняется статус совпадения (\"-\", если совпадение перестало\n"
+" быть совпадением, или \"+\", если совпадение возникло там, где раньше\n"
+" его не было), используйте флаг --all."
+
+msgid ""
+" Returns 0 if a match is found, 1 otherwise.\n"
+" "
+msgstr ""
+" Возвращает 0, если совпадение найдено, 1 в противном случае.\n"
+" "
+
+#, python-format
+msgid "grep: invalid match pattern: %s\n"
+msgstr "grep: наверный шаблон: %s\n"
+
+msgid "STARTREV"
+msgstr "НАЧРЕВИЗИЯ"
+
+msgid "show only heads which are descendants of STARTREV"
+msgstr "показать только головные ревизии-потомки НАЧРЕВИЗИИ"
+
+msgid "show topological heads only"
+msgstr "показать только топологические головные ревизии"
+
+msgid "show active branchheads only (DEPRECATED)"
+msgstr "показать только активные головы ветвей (УСТАРЕЛО)"
+
+msgid "show normal and closed branch heads"
+msgstr "показать обычные и закрытые головы ветвей"
+
+msgid "[-ac] [-r STARTREV] [REV]..."
+msgstr "[-ac] [-r НАЧРЕВИЗИЯ] [РЕВИЗИЯ]..."
+
+msgid "show current repository heads or show branch heads"
+msgstr "показать головы текущего репозитория или головы ветвей"
+
+msgid " With no arguments, show all repository branch heads."
+msgstr " Без аргуметов показывает все головы ветвей репозитория."
+
+msgid ""
+" Repository \"heads\" are changesets with no child changesets. They are\n"
+" where development generally takes place and are the usual targets\n"
+" for update and merge operations. Branch heads are changesets that have\n"
+" no child changeset on the same branch."
+msgstr ""
+" \"Головы\" репозитория - это наборы изменений, у которых нет дочерних\n"
+" наборов. Именно в них происходит разработка и они как правило являются\n"
+" объектами для операций update или merge. Головы ветвей - это наборы\n"
+" изменений, у которых нет дочерних наборов на той же ветви."
+
+msgid ""
+" If one or more REVs are given, only branch heads on the branches\n"
+" associated with the specified changesets are shown."
+msgstr ""
+" Если указана одна или более РЕВИЗИЯ, показываются только головы\n"
+" на ветвях, ассоциированных с указанными ревизиями."
+
+msgid ""
+" If -c/--closed is specified, also show branch heads marked closed\n"
+" (see :hg:`commit --close-branch`)."
+msgstr ""
+" Если указан -c/--closed, показываются также головы на закрытых\n"
+" ветвях (см. :hg:`commit --close-branch`)"
+
+msgid ""
+" If STARTREV is specified, only those heads that are descendants of\n"
+" STARTREV will be displayed."
+msgstr ""
+" Если задана НАЧАЛЬНАЯРЕВИЗИЯ, показываются только головы,\n"
+" являющиеся ее потомками."
+
+msgid ""
+" If -t/--topo is specified, named branch mechanics will be ignored and "
+"only\n"
+" changesets without children will be shown."
+msgstr ""
+" Если указан -t/--topo, механизм именованных ветвей игнорируется, и "
+"будут\n"
+" показаны только наборы изменений без дочерних наборов."
+
+msgid ""
+" Returns 0 if matching heads are found, 1 if not.\n"
+" "
+msgstr ""
+" Возвращает 0, если головы найдены, 1 в противном случае.\n"
+" "
+
+#, python-format
+msgid "no open branch heads found on branches %s"
+msgstr "не найдено голов открытых ветвей на ветвях %s"
+
+#, python-format
+msgid " (started at %s)"
+msgstr " (начиная с %s)"
+
+msgid "show only help for extensions"
+msgstr "показать только справку по расширениям"
+
+msgid "show only help for commands"
+msgstr "показать справку для команд"
+
+msgid "[-ec] [TOPIC]"
+msgstr "[-ec] [ТЕМА]"
+
+msgid "show help for a given topic or a help overview"
+msgstr "показать справку по выбранной теме или обзор справочной информации"
+
+msgid ""
+" With no arguments, print a list of commands with short help messages."
+msgstr " Без аргументов печатает списко команд с кратким описанием."
+
+msgid ""
+" Given a topic, extension, or command name, print help for that\n"
+" topic."
+msgstr ""
+" Если указана тема, расширение или имя команды, показывает справку\n"
+" по этой теме."
+
+msgid ""
+" Returns 0 if successful.\n"
+" "
+msgstr ""
+" Возвращает 0 при успешном выполнении.\n"
+" "
+
+msgid "global options:"
+msgstr "глобальные параметры:"
+
+msgid "use \"hg help\" for the full list of commands"
+msgstr "используйте \"hg help\" чтобы посмотреть полный список команд"
+
+msgid "use \"hg help\" for the full list of commands or \"hg -v\" for details"
+msgstr ""
+"используйте \"hg help\" чтобы посмотреть полный список команд,\"hg -v\" для "
+"подробной информации"
+
+#, python-format
+msgid "use \"hg help %s\" to show the full help text"
+msgstr "используйте \"hg help %s\" чтобы получить полную справку"
+
+#, python-format
+msgid "use \"hg -v help%s\" to show builtin aliases and global options"
+msgstr ""
+"используйте \"hg -v help%s\" чтобы посмотреть встроенные псевдонимы и "
+"глобальные параметры"
+
+#, python-format
+msgid "use \"hg -v help %s\" to show global options"
+msgstr "используйте \"hg -v help %s\" для просмотра глобальных параметров"
+
+msgid "list of commands:"
+msgstr "список команд:"
+
+#, python-format
+msgid ""
+"\n"
+"aliases: %s\n"
+msgstr ""
+"\n"
+"псевдонимы: %s\n"
+
+msgid "(no help text available)"
+msgstr "(справка недоступна)"
+
+#, python-format
+msgid "shell alias for::"
+msgstr "псевдоним оболочки для::"
+
+#, python-format
+msgid " %s"
+msgstr " %s"
+
+#, python-format
+msgid "alias for: hg %s"
+msgstr "псевдоним для: hg %s"
+
+#, python-format
+msgid "%s"
+msgstr "%s"
+
+#, python-format
+msgid ""
+"\n"
+"use \"hg -v help %s\" to show verbose help\n"
+msgstr ""
+"\n"
+"используйте \"hg -v help %s\" чтобы посмотреть подробную справку\n"
+
+msgid "options:\n"
+msgstr "параметры:\n"
+
+#, python-format
+msgid "use \"hg help -e %s\" to show help for the %s extension"
+msgstr "используйте \"hg help -e %s\" для просмотра справки по расширению %s"
+
+msgid "no commands defined\n"
+msgstr "команды не определены\n"
+
+#, python-format
+msgid ""
+"\n"
+"use \"hg help -c %s\" to see help for the %s command\n"
+msgstr ""
+"\n"
+"используйте \"hg help -c %s\" для справки по команде %s\n"
+
+msgid "no help text available"
+msgstr "справка недоступна"
+
+#, python-format
+msgid "%s extension - %s"
+msgstr "%s расширение - %s"
+
+msgid "use \"hg help extensions\" for information on enabling extensions\n"
+msgstr "наберите \"hg help extensions\" для справки по включению расширений\n"
+
+#, python-format
+msgid "'%s' is provided by the following extension:"
+msgstr "'%s' предоставляется следующим расширением:"
+
+msgid "Mercurial Distributed SCM\n"
+msgstr "Распределенная SCM Mercurial\n"
+
+msgid "basic commands:"
+msgstr "Основные команды:"
+
+msgid "enabled extensions:"
+msgstr "Включенные расширения:"
+
+msgid "VALUE"
+msgstr "ЗНАЧЕНИЕ"
+
+msgid "DEPRECATED"
+msgstr "УСТАРЕЛО"
+
+msgid ""
+"\n"
+"[+] marked option can be specified multiple times"
+msgstr ""
+"\n"
+"параметры, помеченные [+], могут указываться многократно"
+
+msgid ""
+"\n"
+"additional help topics:"
+msgstr ""
+"\n"
+"дополнительные разделы справки:"
+
+msgid "identify the specified revision"
+msgstr ""
+
+msgid "show local revision number"
+msgstr "показать локальный номер ревизии"
+
+msgid "show global revision id"
+msgstr "показать глобальный идентификатор ревизии"
+
+msgid "show branch"
+msgstr "показать ветку"
+
+msgid "show tags"
+msgstr "показать метки"
+
+msgid "show bookmarks"
+msgstr "показать закладка"
+
+msgid "[-nibtB] [-r REV] [SOURCE]"
+msgstr "[-nibtB] [-r РЕВИЗИЯ] [ИСТОЧНИК]"
+
+msgid "identify the working copy or specified revision"
+msgstr "описать рабочую копию или указанную ревизию"
+
+msgid ""
+" Print a summary identifying the repository state at REV using one or\n"
+" two parent hash identifiers, followed by a \"+\" if the working\n"
+" directory has uncommitted changes, the branch name (if not default),\n"
+" a list of tags, and a list of bookmarks."
+msgstr ""
+" Печатает сводку, описывающую состояние репозитория на момент РЕВИЗИЯ,\n"
+" в виде одного или двух хеш-идентификаторов родителя, за которым\n"
+" следует \"+\", если рабочая копия содержит незакоммиченные\n"
+" изменения, имени ветви (если отлично от default), списка ветвей,\n"
+" списка меток и списка закладок."
+
+msgid ""
+" When REV is not given, print a summary of the current state of the\n"
+" repository."
+msgstr ""
+" Если РЕВИЗИЯ не указан, печатает сводку по текущему состоянию\n"
+" репозитория."
+
+msgid ""
+" Specifying a path to a repository root or Mercurial bundle will\n"
+" cause lookup to operate on that repository/bundle."
+msgstr ""
+" Если задан путь к репозиторию или бандлу Mercurial, будет\n"
+" работать с этим репозиторием/бандлом."
+
+msgid "can't query remote revision number, branch, or tags"
+msgstr "не могу запросить номер удаленной ревизии, ветви или метки"
+
+msgid ""
+"directory strip option for patch. This has the same meaning as the "
+"corresponding patch option"
+msgstr ""
+"настройка strip для директории при применении патча. Значит то же,что и в "
+"команде patch"
+
+msgid "PATH"
+msgstr "ПУТЬ"
+
+msgid "base path"
+msgstr "базовый путь"
+
+msgid "skip check for outstanding uncommitted changes"
+msgstr "не проверять "
+
+msgid "don't commit, just update the working directory"
+msgstr "не коммитить, просто обновить рабочий каталог"
+
+msgid "apply patch to the nodes from which it was generated"
+msgstr "применить патч к узлам, для которых он был сгенерирован"
+
+msgid "use any branch information in patch (implied by --exact)"
+msgstr "использовать любую информацию о ветвях из патча (включается --exact)"
+
+msgid "[ПАРАМЕТР]... ПАТЧ..."
+msgstr ""
+
+msgid "import an ordered set of patches"
+msgstr "импортировать упорядоченный набор патчей"
+
+msgid ""
+" Import a list of patches and commit them individually (unless\n"
+" --no-commit is specified)."
+msgstr ""
+" Импортирует список патчей и коммитит их по отдельности (если не\n"
+" задан параметр --no-commit)"
+
+msgid ""
+" If there are outstanding changes in the working directory, import\n"
+" will abort unless given the -f/--force flag."
+msgstr ""
+" Если в рабочем каталоге есть незакоммиченные изменения, импорт\n"
+" отменяется, если не указан флаг -f/--force."
+
+msgid ""
+" You can import a patch straight from a mail message. Even patches\n"
+" as attachments work (to use the body part, it must have type\n"
+" text/plain or text/x-patch). From and Subject headers of email\n"
+" message are used as default committer and commit message. All\n"
+" text/plain body parts before first diff are added to commit\n"
+" message."
+msgstr ""
+" Можно импортировать патчи прямо из емейла. Работает даже для\n"
+" патчей в приложениях (чтобы использовать патч из тела письма,\n"
+" оно должно иметь тип text/plain или text/x-patch).Заголовки\n"
+" электронного письма From и Subject используются по умолчанию\n"
+" в качестве автора коммита и комментария к коммиту. Все части\n"
+" тела письма типа text/plain до первого diff'а добавляются\n"
+" к комментарию к коммиту."
+
+msgid ""
+" If the imported patch was generated by :hg:`export`, user and\n"
+" description from patch override values from message headers and\n"
+" body. Values given on command line with -m/--message and -u/--user\n"
+" override these."
+msgstr ""
+" Если импортируемый патч был сгенерирован с помощью :hg:`export`,\n"
+" пользователь и описание из патча используются вместо заголовков\n"
+" и тела электронного письма. С помощью параметров -m/--message и\n"
+" -u/--user можно задать эти значения явно."
+
+msgid ""
+" If --exact is specified, import will set the working directory to\n"
+" the parent of each patch before applying it, and will abort if the\n"
+" resulting changeset has a different ID than the one recorded in\n"
+" the patch. This may happen due to character set problems or other\n"
+" deficiencies in the text patch format."
+msgstr ""
+" Если указан --exact, рабочий каталог будет обновляться до родителя\n"
+" каждого патча перед его применением, и импорт будет отменен, если\n"
+" получившийся набор изменений будет иметь другой хэш, чем записанный\n"
+" в патче. Это может случиться, например, из-за проблем с кодировкой\n"
+" или других дефектах в формате патча."
+
+msgid ""
+" With -s/--similarity, hg will attempt to discover renames and\n"
+" copies in the patch in the same way as 'addremove'."
+msgstr ""
+" Если указан -s/--similatity, Mercurial попытается обнаружить\n"
+" копирования и переименования в патче так же, как в 'addremove'."
+
+msgid ""
+" To read a patch from standard input, use \"-\" as the patch name. If\n"
+" a URL is specified, the patch will be downloaded from it.\n"
+" See :hg:`help dates` for a list of formats valid for -d/--date."
+msgstr ""
+" Используйте \"-\" вместо имени патча, чтобы прочитать патч со\n"
+" стандартного ввода. Если указан URL, патч будет загружен оттуда.\n"
+" См. :hg:`help dates` о допустимых форматах дат для -d/--date."
+
+msgid "to working directory"
+msgstr "в рабочий каталог"
+
+msgid "not a Mercurial patch"
+msgstr "не патч Mercurial"
+
+msgid "patch is damaged or loses information"
+msgstr "патч поврежден или в нем недостает данных"
+
+msgid "applying patch from stdin\n"
+msgstr "применяю патч со стандартного вводар\n"
+
+#, python-format
+msgid "applied %s\n"
+msgstr "применен %s\n"
+
+msgid "no diffs found"
+msgstr "отличий не найдено"
+
+msgid "run even if remote repository is unrelated"
+msgstr ""
+
+msgid "show newest record first"
+msgstr ""
+
+msgid "file to store the bundles into"
+msgstr ""
+
+msgid "a remote changeset intended to be added"
+msgstr ""
+
+msgid "compare bookmarks"
+msgstr ""
+
+msgid "a specific branch you would like to pull"
+msgstr ""
+
+msgid "[-p] [-n] [-M] [-f] [-r REV]... [--bundle FILENAME] [SOURCE]"
+msgstr ""
+
+msgid "show new changesets found in source"
+msgstr ""
+
+msgid ""
+" Show new changesets found in the specified path/URL or the default\n"
+" pull location. These are the changesets that would have been pulled\n"
+" if a pull at the time you issued this command."
+msgstr ""
+
+msgid ""
+" For remote repository, using --bundle avoids downloading the\n"
+" changesets twice if the incoming is followed by a pull."
+msgstr ""
+
+msgid " See pull for valid source format details."
+msgstr ""
+
+msgid ""
+" Returns 0 if there are incoming changes, 1 otherwise.\n"
+" "
+msgstr ""
+
+msgid "cannot combine --bundle and --subrepos"
+msgstr ""
+
+msgid "remote doesn't support bookmarks\n"
+msgstr "удаленный репозиторий не поддерживает закладки\n"
+
+msgid "[-e CMD] [--remotecmd CMD] [DEST]"
+msgstr "[-e КОМАНДА] [--remotecmd КОМАНДА] [НАЗН]"
+
+msgid "create a new repository in the given directory"
+msgstr ""
+
+msgid ""
+" Initialize a new repository in the given directory. If the given\n"
+" directory does not exist, it will be created."
+msgstr ""
+
+msgid " If no directory is given, the current directory is used."
+msgstr ""
+
+msgid ""
+" It is possible to specify an ``ssh://`` URL as the destination.\n"
+" See :hg:`help urls` for more information."
+msgstr ""
+
+msgid "search the repository as it is in REV"
+msgstr ""
+
+msgid "end filenames with NUL, for use with xargs"
+msgstr ""
+
+msgid "print complete paths from the filesystem root"
+msgstr ""
+
+msgid "[OPTION]... [PATTERN]..."
+msgstr ""
+
+msgid "locate files matching specific patterns"
+msgstr ""
+
+msgid ""
+" Print files under Mercurial control in the working directory whose\n"
+" names match the given patterns."
+msgstr ""
+
+msgid ""
+" By default, this command searches all directories in the working\n"
+" directory. To search just the current directory and its\n"
+" subdirectories, use \"--include .\"."
+msgstr ""
+
+msgid ""
+" If no patterns are given to match, this command prints the names\n"
+" of all files under Mercurial control in the working directory."
+msgstr ""
+
+msgid ""
+" If you want to feed the output of this command into the \"xargs\"\n"
+" command, use the -0 option to both this command and \"xargs\". This\n"
+" will avoid the problem of \"xargs\" treating single filenames that\n"
+" contain whitespace as multiple filenames."
+msgstr ""
+
+msgid "only follow the first parent of merge changesets"
+msgstr ""
+
+msgid "show revisions matching date spec"
+msgstr ""
+
+msgid "show copied files"
+msgstr ""
+
+msgid "do case-insensitive search for a given text"
+msgstr ""
+
+msgid "include revisions where files were removed"
+msgstr ""
+
+msgid "show only merges"
+msgstr ""
+
+msgid "revisions committed by user"
+msgstr ""
+
+msgid "show only changesets within the given named branch (DEPRECATED)"
+msgstr ""
+
+msgid "show changesets within the given named branch"
+msgstr ""
+
+msgid "do not display revision or any of its ancestors"
+msgstr ""
+
+msgid "[OPTION]... [FILE]"
+msgstr ""
+
+msgid "show revision history of entire repository or files"
+msgstr ""
+
+msgid ""
+" Print the revision history of the specified files or the entire\n"
+" project."
+msgstr ""
+
+msgid ""
+" File history is shown without following rename or copy history of\n"
+" files. Use -f/--follow with a filename to follow history across\n"
+" renames and copies. --follow without a filename will only show\n"
+" ancestors or descendants of the starting revision. --follow-first\n"
+" only follows the first parent of merge revisions."
+msgstr ""
+
+msgid ""
+" If no revision range is specified, the default is ``tip:0`` unless\n"
+" --follow is set, in which case the working directory parent is\n"
+" used as the starting revision. You can specify a revision set for\n"
+" log, see :hg:`help revsets` for more information."
+msgstr ""
+
+msgid ""
+" By default this command prints revision number and changeset id,\n"
+" tags, non-trivial parents, user, date and time, and a summary for\n"
+" each commit. When the -v/--verbose switch is used, the list of\n"
+" changed files and full commit message are shown."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" log -p/--patch may generate unexpected diff output for merge\n"
+" changesets, as it will only compare the merge changeset against\n"
+" its first parent. Also, only files different from BOTH parents\n"
+" will appear in files:."
+msgstr ""
+
+msgid "revision to display"
+msgstr ""
+
+msgid "[-r REV]"
+msgstr ""
+
+msgid "output the current or given revision of the project manifest"
+msgstr ""
+
+msgid ""
+" Print a list of version controlled files for the given revision.\n"
+" If no revision is given, the first parent of the working directory\n"
+" is used, or the null revision if no revision is checked out."
+msgstr ""
+
+msgid ""
+" With -v, print file permissions, symlink and executable bits.\n"
+" With --debug, print file revision hashes."
+msgstr ""
+
+msgid "force a merge with outstanding changes"
+msgstr ""
+
+msgid "revision to merge"
+msgstr ""
+
+msgid "review revisions to merge (no merge is performed)"
+msgstr ""
+
+msgid "[-P] [-f] [[-r] REV]"
+msgstr ""
+
+msgid "merge working directory with another revision"
+msgstr ""
+
+msgid ""
+" The current working directory is updated with all changes made in\n"
+" the requested revision since the last common predecessor revision."
+msgstr ""
+
+msgid ""
+" Files that changed between either parent are marked as changed for\n"
+" the next commit and a commit must be performed before any further\n"
+" updates to the repository are allowed. The next commit will have\n"
+" two parents."
+msgstr ""
+
+msgid ""
+" ``--tool`` can be used to specify the merge tool used for file\n"
+" merges. It overrides the HGMERGE environment variable and your\n"
+" configuration files. See :hg:`help merge-tools` for options."
+msgstr ""
+
+msgid ""
+" If no revision is specified, the working directory's parent is a\n"
+" head revision, and the current branch contains exactly one other\n"
+" head, the other head is merged with by default. Otherwise, an\n"
+" explicit revision with which to merge with must be provided."
+msgstr ""
+
+msgid " :hg:`resolve` must be used to resolve unresolved files."
+msgstr ""
+
+msgid ""
+" To undo an uncommitted merge, use :hg:`update --clean .` which\n"
+" will check out a clean copy of the original merge parent, losing\n"
+" all changes."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if there are unresolved files.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "branch '%s' has %d heads - please merge with an explicit rev"
+msgstr ""
+
+msgid "run 'hg heads .' to see heads"
+msgstr ""
+
+#, python-format
+msgid "branch '%s' has one head - please merge with an explicit rev"
+msgstr ""
+
+msgid "run 'hg heads' to see all heads"
+msgstr ""
+
+msgid "there is nothing to merge"
+msgstr ""
+
+#, python-format
+msgid "%s - use \"hg update\" instead"
+msgstr ""
+
+msgid "working directory not at a head revision"
+msgstr ""
+
+msgid "use 'hg update' or merge with an explicit revision"
+msgstr ""
+
+msgid "a changeset intended to be included in the destination"
+msgstr ""
+
+msgid "a specific branch you would like to push"
+msgstr ""
+
+msgid "[-M] [-p] [-n] [-f] [-r REV]... [DEST]"
+msgstr ""
+
+msgid "show changesets not found in the destination"
+msgstr ""
+
+msgid ""
+" Show changesets not found in the specified destination repository\n"
+" or the default push location. These are the changesets that would\n"
+" be pushed if a push was requested."
+msgstr ""
+
+msgid " See pull for details of valid destination formats."
+msgstr ""
+
+msgid ""
+" Returns 0 if there are outgoing changes, 1 otherwise.\n"
+" "
+msgstr ""
+
+msgid "show parents of the specified revision"
+msgstr ""
+
+msgid "[-r REV] [FILE]"
+msgstr ""
+
+msgid "show the parents of the working directory or revision"
+msgstr ""
+
+msgid ""
+" Print the working directory's parent revisions. If a revision is\n"
+" given via -r/--rev, the parent of that revision will be printed.\n"
+" If a file argument is given, the revision in which the file was\n"
+" last changed (before the working directory revision or the\n"
+" argument to --rev if given) is printed."
+msgstr ""
+
+msgid "can only specify an explicit filename"
+msgstr ""
+
+#, python-format
+msgid "'%s' not found in manifest!"
+msgstr ""
+
+msgid "[NAME]"
+msgstr ""
+
+msgid "show aliases for remote repositories"
+msgstr ""
+
+msgid ""
+" Show definition of symbolic path name NAME. If no name is given,\n"
+" show definition of all available names."
+msgstr ""
+
+msgid ""
+" Option -q/--quiet suppresses all output when searching for NAME\n"
+" and shows only the path names when listing all definitions."
+msgstr ""
+
+msgid ""
+" Path names are defined in the [paths] section of your\n"
+" configuration file and in ``/etc/mercurial/hgrc``. If run inside a\n"
+" repository, ``.hg/hgrc`` is used, too."
+msgstr ""
+
+msgid ""
+" The path names ``default`` and ``default-push`` have a special\n"
+" meaning. When performing a push or pull operation, they are used\n"
+" as fallbacks if no location is specified on the command-line.\n"
+" When ``default-push`` is set, it will be used for push and\n"
+" ``default`` will be used for pull; otherwise ``default`` is used\n"
+" as the fallback for both. When cloning a repository, the clone\n"
+" source is written as ``default`` in ``.hg/hgrc``. Note that\n"
+" ``default`` and ``default-push`` apply to all inbound (e.g.\n"
+" :hg:`incoming`) and outbound (e.g. :hg:`outgoing`, :hg:`email` and\n"
+" :hg:`bundle`) operations."
+msgstr ""
+
+msgid " See :hg:`help urls` for more information."
+msgstr ""
+
+msgid "not found!\n"
+msgstr ""
+
+msgid "not updating, since new heads added\n"
+msgstr ""
+
+msgid "(run 'hg heads' to see heads, 'hg merge' to merge)\n"
+msgstr ""
+
+msgid "(run 'hg heads .' to see heads, 'hg merge' to merge)\n"
+msgstr ""
+
+msgid "(run 'hg heads' to see heads)\n"
+msgstr ""
+
+msgid "(run 'hg update' to get a working copy)\n"
+msgstr ""
+
+msgid "update to new branch head if changesets were pulled"
+msgstr ""
+
+msgid "run even when remote repository is unrelated"
+msgstr ""
+
+msgid "BOOKMARK"
+msgstr ""
+
+msgid "bookmark to pull"
+msgstr ""
+
+msgid "[-u] [-f] [-r REV]... [-e CMD] [--remotecmd CMD] [SOURCE]"
+msgstr ""
+
+msgid "pull changes from the specified source"
+msgstr ""
+
+msgid " Pull changes from a remote repository to a local one."
+msgstr ""
+
+msgid ""
+" This finds all changes from the repository at the specified path\n"
+" or URL and adds them to a local repository (the current one unless\n"
+" -R is specified). By default, this does not update the copy of the\n"
+" project in the working directory."
+msgstr ""
+
+msgid ""
+" Use :hg:`incoming` if you want to see what would have been added\n"
+" by a pull at the time you issued this command. If you then decide\n"
+" to add those changes to the repository, you should use :hg:`pull\n"
+" -r X` where ``X`` is the last changeset listed by :hg:`incoming`."
+msgstr ""
+
+msgid ""
+" If SOURCE is omitted, the 'default' path will be used.\n"
+" See :hg:`help urls` for more information."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if an update had unresolved files.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "remote bookmark %s not found!"
+msgstr ""
+
+msgid ""
+"other repository doesn't support revision lookup, so a rev cannot be "
+"specified."
+msgstr ""
+
+#, python-format
+msgid "importing bookmark %s\n"
+msgstr ""
+
+msgid "force push"
+msgstr ""
+
+msgid "bookmark to push"
+msgstr ""
+
+msgid "allow pushing a new branch"
+msgstr ""
+
+msgid "[-f] [-r REV]... [-e CMD] [--remotecmd CMD] [DEST]"
+msgstr ""
+
+msgid "push changes to the specified destination"
+msgstr ""
+
+msgid ""
+" Push changesets from the local repository to the specified\n"
+" destination."
+msgstr ""
+
+msgid ""
+" This operation is symmetrical to pull: it is identical to a pull\n"
+" in the destination repository from the current one."
+msgstr ""
+
+msgid ""
+" By default, push will not allow creation of new heads at the\n"
+" destination, since multiple heads would make it unclear which head\n"
+" to use. In this situation, it is recommended to pull and merge\n"
+" before pushing."
+msgstr ""
+
+msgid ""
+" Use --new-branch if you want to allow push to create a new named\n"
+" branch that is not present at the destination. This allows you to\n"
+" only create a new branch without forcing other changes."
+msgstr ""
+
+msgid ""
+" Use -f/--force to override the default behavior and push all\n"
+" changesets on all branches."
+msgstr ""
+
+msgid ""
+" If -r/--rev is used, the specified revision and all its ancestors\n"
+" will be pushed to the remote repository."
+msgstr ""
+
+msgid ""
+" Please see :hg:`help urls` for important details about ``ssh://``\n"
+" URLs. If DESTINATION is omitted, a default path will be used."
+msgstr ""
+
+msgid ""
+" Returns 0 if push was successful, 1 if nothing to push.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "pushing to %s\n"
+msgstr ""
+
+#, python-format
+msgid "exporting bookmark %s\n"
+msgstr ""
+
+#, python-format
+msgid "deleting remote bookmark %s\n"
+msgstr ""
+
+#, python-format
+msgid "bookmark %s does not exist on the local or remote repository!\n"
+msgstr ""
+
+#, python-format
+msgid "updating bookmark %s failed!\n"
+msgstr ""
+
+msgid "roll back an interrupted transaction"
+msgstr ""
+
+msgid " Recover from an interrupted commit or pull."
+msgstr ""
+
+msgid ""
+" This command tries to fix the repository status after an\n"
+" interrupted operation. It should only be necessary when Mercurial\n"
+" suggests it."
+msgstr ""
+
+msgid ""
+" Returns 0 if successful, 1 if nothing to recover or verify fails.\n"
+" "
+msgstr ""
+
+msgid "record delete for missing files"
+msgstr ""
+
+msgid "remove (and delete) file even if added or modified"
+msgstr ""
+
+msgid "remove the specified files on the next commit"
+msgstr ""
+
+msgid " Schedule the indicated files for removal from the repository."
+msgstr ""
+
+msgid ""
+" This only removes files from the current branch, not from the\n"
+" entire project history. -A/--after can be used to remove only\n"
+" files that have already been deleted, -f/--force can be used to\n"
+" force deletion, and -Af can be used to remove files from the next\n"
+" revision without deleting them from the working directory."
+msgstr ""
+
+msgid ""
+" The following table details the behavior of remove for different\n"
+" file states (columns) and option combinations (rows). The file\n"
+" states are Added [A], Clean [C], Modified [M] and Missing [!] (as\n"
+" reported by :hg:`status`). The actions are Warn, Remove (from\n"
+" branch) and Delete (from disk)::"
+msgstr ""
+
+msgid ""
+" A C M !\n"
+" none W RD W R\n"
+" -f R RD RD R\n"
+" -A W W W R\n"
+" -Af R R R R"
+msgstr ""
+
+msgid ""
+" This command schedules the files to be removed at the next commit.\n"
+" To undo a remove before that, see :hg:`revert`."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if any warnings encountered.\n"
+" "
+msgstr ""
+
+#, python-format
+msgid "not removing %s: file is untracked\n"
+msgstr ""
+
+#, python-format
+msgid "not removing %s: file still exists (use -f to force removal)\n"
+msgstr ""
+
+#, python-format
+msgid "not removing %s: file is modified (use -f to force removal)\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"not removing %s: file has been marked for add (use -f to force removal)\n"
+msgstr ""
+
+msgid "record a rename that has already occurred"
+msgstr ""
+
+msgid "[OPTION]... SOURCE... DEST"
+msgstr ""
+
+msgid "rename files; equivalent of copy + remove"
+msgstr ""
+
+msgid ""
+" Mark dest as copies of sources; mark sources for deletion. If dest\n"
+" is a directory, copies are put in that directory. If dest is a\n"
+" file, there can only be one source."
+msgstr ""
+
+msgid ""
+" This command takes effect at the next commit. To undo a rename\n"
+" before that, see :hg:`revert`."
+msgstr ""
+
+msgid "select all unresolved files"
+msgstr ""
+
+msgid "list state of files needing merge"
+msgstr ""
+
+msgid "mark files as resolved"
+msgstr ""
+
+msgid "mark files as unresolved"
+msgstr ""
+
+msgid "hide status prefix"
+msgstr ""
+
+msgid "redo merges or set/view the merge status of files"
+msgstr ""
+
+msgid ""
+" Merges with unresolved conflicts are often the result of\n"
+" non-interactive merging using the ``internal:merge`` configuration\n"
+" setting, or a command-line merge tool like ``diff3``. The resolve\n"
+" command is used to manage the files involved in a merge, after\n"
+" :hg:`merge` has been run, and before :hg:`commit` is run (i.e. the\n"
+" working directory must have two parents)."
+msgstr ""
+
+msgid " The resolve command can be used in the following ways:"
+msgstr ""
+
+msgid ""
+" - :hg:`resolve [--tool TOOL] FILE...`: attempt to re-merge the "
+"specified\n"
+" files, discarding any previous merge attempts. Re-merging is not\n"
+" performed for files already marked as resolved. Use ``--all/-a``\n"
+" to selects all unresolved files. ``--tool`` can be used to specify\n"
+" the merge tool used for the given files. It overrides the HGMERGE\n"
+" environment variable and your configuration files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -m [FILE]`: mark a file as having been resolved\n"
+" (e.g. after having manually fixed-up the files). The default is\n"
+" to mark all unresolved files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -u [FILE]...`: mark a file as unresolved. The\n"
+" default is to mark all resolved files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -l`: list files which had or still have conflicts.\n"
+" In the printed list, ``U`` = unresolved and ``R`` = resolved."
+msgstr ""
+
+msgid ""
+" Note that Mercurial will not let you commit files with unresolved\n"
+" merge conflicts. You must use :hg:`resolve -m ...` before you can\n"
+" commit after a conflicting merge."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if any files fail a resolve attempt.\n"
+" "
+msgstr ""
+
+msgid "too many options specified"
+msgstr ""
+
+msgid "can't specify --all and patterns"
+msgstr ""
+
+msgid "no files or directories specified; use --all to remerge all files"
+msgstr ""
+
+msgid "revert all changes when no arguments given"
+msgstr ""
+
+msgid "tipmost revision matching date"
+msgstr ""
+
+msgid "revert to the specified revision"
+msgstr ""
+
+msgid "do not save backup copies of files"
+msgstr ""
+
+msgid "[OPTION]... [-r REV] [NAME]..."
+msgstr ""
+
+msgid "restore individual files or directories to an earlier state"
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" This command is most likely not what you are looking for.\n"
+" Revert will partially overwrite content in the working\n"
+" directory without changing the working directory parents. Use\n"
+" :hg:`update -r rev` to check out earlier revisions, or\n"
+" :hg:`update --clean .` to undo a merge which has added another\n"
+" parent."
+msgstr ""
+
+msgid ""
+" With no revision specified, revert the named files or directories\n"
+" to the contents they had in the parent of the working directory.\n"
+" This restores the contents of the affected files to an unmodified\n"
+" state and unschedules adds, removes, copies, and renames. If the\n"
+" working directory has two parents, you must explicitly specify a\n"
+" revision."
+msgstr ""
+
+msgid ""
+" Using the -r/--rev option, revert the given files or directories\n"
+" to their contents as of a specific revision. This can be helpful\n"
+" to \"roll back\" some or all of an earlier change. See :hg:`help\n"
+" dates` for a list of formats valid for -d/--date."
+msgstr ""
+
+msgid ""
+" Revert modifies the working directory. It does not commit any\n"
+" changes, or change the parent of the working directory. If you\n"
+" revert to a revision other than the parent of the working\n"
+" directory, the reverted files will thus appear modified\n"
+" afterwards."
+msgstr ""
+
+msgid ""
+" If a file has been deleted, it is restored. Files scheduled for\n"
+" addition are just unscheduled and left as they are. If the\n"
+" executable mode of a file was changed, it is reset."
+msgstr ""
+
+msgid ""
+" If names are given, all files matching the names are reverted.\n"
+" If no arguments are given, no files are reverted."
+msgstr ""
+
+msgid ""
+" Modified files are saved with a .orig suffix before reverting.\n"
+" To disable these backups, use --no-backup."
+msgstr ""
+
+msgid "you can't specify a revision and a date"
+msgstr ""
+
+msgid "uncommitted merge - use \"hg update\", see \"hg help revert\""
+msgstr ""
+
+msgid "no files or directories specified; use --all to revert the whole repo"
+msgstr ""
+
+#, python-format
+msgid "forgetting %s\n"
+msgstr ""
+
+#, python-format
+msgid "reverting %s\n"
+msgstr ""
+
+#, python-format
+msgid "undeleting %s\n"
+msgstr ""
+
+#, python-format
+msgid "saving current version of %s as %s\n"
+msgstr ""
+
+#, python-format
+msgid "file not managed: %s\n"
+msgstr ""
+
+#, python-format
+msgid "no changes needed to %s\n"
+msgstr ""
+
+msgid "roll back the last transaction (dangerous)"
+msgstr ""
+
+msgid ""
+" This command should be used with care. There is only one level of\n"
+" rollback, and there is no way to undo a rollback. It will also\n"
+" restore the dirstate at the time of the last transaction, losing\n"
+" any dirstate changes since that time. This command does not alter\n"
+" the working directory."
+msgstr ""
+
+msgid ""
+" Transactions are used to encapsulate the effects of all commands\n"
+" that create new changesets or propagate existing changesets into a\n"
+" repository. For example, the following commands are transactional,\n"
+" and their effects can be rolled back:"
+msgstr ""
+
+msgid ""
+" - commit\n"
+" - import\n"
+" - pull\n"
+" - push (with this repository as the destination)\n"
+" - unbundle"
+msgstr ""
+
+msgid ""
+" This command is not intended for use on public repositories. Once\n"
+" changes are visible for pull by other users, rolling a transaction\n"
+" back locally is ineffective (someone else may already have pulled\n"
+" the changes). Furthermore, a race is possible with readers of the\n"
+" repository; for example an in-progress pull from the repository\n"
+" may fail if a rollback is performed."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if no rollback data is available.\n"
+" "
+msgstr ""
+
+msgid "print the root (top) of the current working directory"
+msgstr ""
+
+msgid " Print the root directory of the current repository."
+msgstr ""
+
+msgid "name of access log file to write to"
+msgstr "имя файла для записи журнала доступа"
+
+msgid "name of error log file to write to"
+msgstr "имя файла для записи журнала ошибок"
+
+msgid "PORT"
+msgstr ""
+
+msgid "port to listen on (default: 8000)"
+msgstr ""
+
+msgid "address to listen on (default: all interfaces)"
+msgstr ""
+
+msgid "ADDR"
+msgstr ""
+
+msgid "prefix path to serve from (default: server root)"
+msgstr ""
+"префикс пути для предоставления доступа (по умолчанию: в корне сервера)"
+
+msgid "name to show in web pages (default: working directory)"
+msgstr ""
+
+msgid "name of the hgweb config file (see \"hg help hgweb\")"
+msgstr ""
+
+msgid "name of the hgweb config file (DEPRECATED)"
+msgstr "имя конфигурационного файла hgweb (УСТАРЕЛО)"
+
+msgid "for remote clients"
+msgstr "для удалённых клиентов"
+
+msgid "web templates to use"
+msgstr "используемые веб-шаблоны"
+
+msgid "template style to use"
+msgstr "используемый стиль шаблона"
+
+msgid "use IPv6 in addition to IPv4"
+msgstr "использовать IPv6 вместе с IPv4"
+
+msgid "SSL certificate file"
+msgstr "Файл сертификата SSL"
+
+msgid "start stand-alone webserver"
+msgstr ""
+
+msgid ""
+" Start a local HTTP repository browser and pull server. You can use\n"
+" this for ad-hoc sharing and browsing of repositories. It is\n"
+" recommended to use a real web server to serve a repository for\n"
+" longer periods of time."
+msgstr ""
+
+msgid ""
+" Please note that the server does not implement access control.\n"
+" This means that, by default, anybody can read from the server and\n"
+" nobody can write to it by default. Set the ``web.allow_push``\n"
+" option to ``*`` to allow everybody to push to the server. You\n"
+" should use a real web server if you need to authenticate users."
+msgstr ""
+
+msgid ""
+" By default, the server logs accesses to stdout and errors to\n"
+" stderr. Use the -A/--accesslog and -E/--errorlog options to log to\n"
+" files."
+msgstr ""
+
+msgid ""
+" To have the server choose a free port number to listen on, specify\n"
+" a port number of 0; in this case, the server will print the port\n"
+" number it uses."
+msgstr ""
+
+msgid "There is no Mercurial repository here (.hg not found)"
+msgstr "Здесь нет репозитория Mercurial (.hg не обнаружен)"
+
+#, python-format
+msgid "listening at http://%s%s/%s (bound to %s:%d)\n"
+msgstr ""
+
+msgid "show untrusted configuration options"
+msgstr ""
+
+msgid "[-u] [NAME]..."
+msgstr ""
+
+msgid "show combined config settings from all hgrc files"
+msgstr ""
+
+msgid " With no arguments, print names and values of all config items."
+msgstr ""
+
+msgid ""
+" With one argument of the form section.name, print just the value\n"
+" of that config item."
+msgstr ""
+
+msgid ""
+" With multiple arguments, print names and values of all config\n"
+" items with matching section names."
+msgstr ""
+
+msgid ""
+" With --debug, the source (filename and line number) is printed\n"
+" for each config item."
+msgstr ""
+
+#, python-format
+msgid "read config from: %s\n"
+msgstr ""
+
+msgid "only one config item permitted"
+msgstr ""
+
+msgid "show status of all files"
+msgstr ""
+
+msgid "show only modified files"
+msgstr ""
+
+msgid "show only added files"
+msgstr ""
+
+msgid "show only removed files"
+msgstr ""
+
+msgid "show only deleted (but tracked) files"
+msgstr ""
+
+msgid "show only files without changes"
+msgstr ""
+
+msgid "show only unknown (not tracked) files"
+msgstr ""
+
+msgid "show only ignored files"
+msgstr ""
+
+msgid "show source of copied files"
+msgstr ""
+
+msgid "show difference from revision"
+msgstr ""
+
+msgid "list the changed files of a revision"
+msgstr ""
+
+msgid "show changed files in the working directory"
+msgstr ""
+
+msgid ""
+" Show status of files in the repository. If names are given, only\n"
+" files that match are shown. Files that are clean or ignored or\n"
+" the source of a copy/move operation, are not listed unless\n"
+" -c/--clean, -i/--ignored, -C/--copies or -A/--all are given.\n"
+" Unless options described with \"show only ...\" are given, the\n"
+" options -mardu are used."
+msgstr ""
+
+msgid ""
+" Option -q/--quiet hides untracked (unknown and ignored) files\n"
+" unless explicitly requested with -u/--unknown or -i/--ignored."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" status may appear to disagree with diff if permissions have\n"
+" changed or a merge has occurred. The standard diff format does\n"
+" not report permission changes and diff only reports changes\n"
+" relative to one merge parent."
+msgstr ""
+
+msgid ""
+" If one revision is given, it is used as the base revision.\n"
+" If two revisions are given, the differences between them are\n"
+" shown. The --change option can also be used as a shortcut to list\n"
+" the changed files of a revision from its first parent."
+msgstr ""
+
+msgid " The codes used to show the status of files are::"
+msgstr ""
+
+msgid ""
+" M = modified\n"
+" A = added\n"
+" R = removed\n"
+" C = clean\n"
+" ! = missing (deleted by non-hg command, but still tracked)\n"
+" ? = not tracked\n"
+" I = ignored\n"
+" = origin of the previous file listed as A (added)"
+msgstr ""
+
+msgid "check for push and pull"
+msgstr ""
+
+msgid "summarize working directory state"
+msgstr ""
+
+msgid ""
+" This generates a brief summary of the working directory state,\n"
+" including parents, branch, commit status, and available updates."
+msgstr ""
+
+msgid ""
+" With the --remote option, this will check the default paths for\n"
+" incoming and outgoing changes. This can be time-consuming."
+msgstr ""
+
+#, python-format
+msgid "parent: %d:%s "
+msgstr ""
+
+msgid " (empty repository)"
+msgstr ""
+
+msgid " (no revision checked out)"
+msgstr ""
+
+#, python-format
+msgid "branch: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%d modified"
+msgstr ""
+
+#, python-format
+msgid "%d added"
+msgstr ""
+
+#, python-format
+msgid "%d removed"
+msgstr ""
+
+#, python-format
+msgid "%d renamed"
+msgstr ""
+
+#, python-format
+msgid "%d copied"
+msgstr ""
+
+#, python-format
+msgid "%d deleted"
+msgstr ""
+
+#, python-format
+msgid "%d unknown"
+msgstr ""
+
+#, python-format
+msgid "%d ignored"
+msgstr ""
+
+#, python-format
+msgid "%d unresolved"
+msgstr ""
+
+#, python-format
+msgid "%d subrepos"
+msgstr ""
+
+msgid " (merge)"
+msgstr ""
+
+msgid " (new branch)"
+msgstr ""
+
+msgid " (head closed)"
+msgstr ""
+
+msgid " (clean)"
+msgstr ""
+
+msgid " (new branch head)"
+msgstr ""
+
+#, python-format
+msgid "commit: %s\n"
+msgstr ""
+
+msgid "update: (current)\n"
+msgstr ""
+
+#, python-format
+msgid "update: %d new changesets (update)\n"
+msgstr ""
+
+#, python-format
+msgid "update: %d new changesets, %d branch heads (merge)\n"
+msgstr ""
+
+msgid "1 or more incoming"
+msgstr ""
+
+#, python-format
+msgid "%d outgoing"
+msgstr ""
+
+#, python-format
+msgid "%d incoming bookmarks"
+msgstr ""
+
+#, python-format
+msgid "%d outgoing bookmarks"
+msgstr ""
+
+#, python-format
+msgid "remote: %s\n"
+msgstr ""
+
+msgid "remote: (synced)\n"
+msgstr ""
+
+msgid "force tag"
+msgstr ""
+
+msgid "make the tag local"
+msgstr ""
+
+msgid "revision to tag"
+msgstr ""
+
+msgid "remove a tag"
+msgstr ""
+
+msgid "use <text> as commit message"
+msgstr ""
+
+msgid "[-f] [-l] [-m TEXT] [-d DATE] [-u USER] [-r REV] NAME..."
+msgstr ""
+
+msgid "add one or more tags for the current or given revision"
+msgstr ""
+
+msgid " Name a particular revision using <name>."
+msgstr ""
+
+msgid ""
+" Tags are used to name particular revisions of the repository and are\n"
+" very useful to compare different revisions, to go back to significant\n"
+" earlier versions or to mark branch points as releases, etc. Changing\n"
+" an existing tag is normally disallowed; use -f/--force to override."
+msgstr ""
+
+msgid ""
+" If no revision is given, the parent of the working directory is\n"
+" used, or tip if no revision is checked out."
+msgstr ""
+
+msgid ""
+" To facilitate version control, distribution, and merging of tags,\n"
+" they are stored as a file named \".hgtags\" which is managed similarly\n"
+" to other project files and can be hand-edited if necessary. This\n"
+" also means that tagging creates a new commit. The file\n"
+" \".hg/localtags\" is used for local tags (not shared among\n"
+" repositories)."
+msgstr ""
+
+msgid ""
+" Tag commits are usually made at the head of a branch. If the parent\n"
+" of the working directory is not a branch head, :hg:`tag` aborts; use\n"
+" -f/--force to force the tag commit to be based on a non-head\n"
+" changeset."
+msgstr ""
+
+msgid ""
+" Since tag names have priority over branch names during revision\n"
+" lookup, using an existing branch name as a tag name is discouraged."
+msgstr ""
+
+msgid "tag names must be unique"
+msgstr ""
+
+msgid "tag names cannot consist entirely of whitespace"
+msgstr ""
+
+msgid "--rev and --remove are incompatible"
+msgstr ""
+
+#, python-format
+msgid "tag '%s' does not exist"
+msgstr "метка '%s' не существует"
+
+#, python-format
+msgid "tag '%s' is not a global tag"
+msgstr "метка '%s' не является глобальной"
+
+#, python-format
+msgid "tag '%s' is not a local tag"
+msgstr "метка '%s' не является локальной"
+
+#, python-format
+msgid "tag '%s' already exists (use -f to force)"
+msgstr ""
+
+msgid "uncommitted merge"
+msgstr ""
+
+msgid "not at a branch head (use -f to force)"
+msgstr ""
+
+msgid "list repository tags"
+msgstr ""
+
+msgid ""
+" This lists both regular and local tags. When the -v/--verbose\n"
+" switch is used, a third column \"local\" is printed for local tags."
+msgstr ""
+
+msgid "[-p] [-g]"
+msgstr ""
+
+msgid "show the tip revision"
+msgstr ""
+
+msgid ""
+" The tip revision (usually just called the tip) is the changeset\n"
+" most recently added to the repository (and therefore the most\n"
+" recently changed head)."
+msgstr ""
+
+msgid ""
+" If you have just made a commit, that commit will be the tip. If\n"
+" you have just pulled changes from another repository, the tip of\n"
+" that repository becomes the current tip. The \"tip\" tag is special\n"
+" and cannot be renamed or assigned to a different changeset."
+msgstr ""
+
+msgid "update to new branch head if changesets were unbundled"
+msgstr ""
+
+msgid "[-u] FILE..."
+msgstr ""
+
+msgid "apply one or more changegroup files"
+msgstr ""
+
+msgid ""
+" Apply one or more compressed changegroup files generated by the\n"
+" bundle command."
+msgstr ""
+
+msgid ""
+" Returns 0 on success, 1 if an update has unresolved files.\n"
+" "
+msgstr ""
+
+msgid "discard uncommitted changes (no backup)"
+msgstr ""
+
+msgid "update across branches if no uncommitted changes"
+msgstr ""
+
+msgid "[-c] [-C] [-d DATE] [[-r] REV]"
+msgstr ""
+
+msgid "update working directory (or switch revisions)"
+msgstr ""
+
+msgid ""
+" Update the repository's working directory to the specified\n"
+" changeset. If no changeset is specified, update to the tip of the\n"
+" current named branch."
+msgstr ""
+
+msgid ""
+" If the changeset is not a descendant of the working directory's\n"
+" parent, the update is aborted. With the -c/--check option, the\n"
+" working directory is checked for uncommitted changes; if none are\n"
+" found, the working directory is updated to the specified\n"
+" changeset."
+msgstr ""
+
+msgid ""
+" The following rules apply when the working directory contains\n"
+" uncommitted changes:"
+msgstr ""
+
+msgid ""
+" 1. If neither -c/--check nor -C/--clean is specified, and if\n"
+" the requested changeset is an ancestor or descendant of\n"
+" the working directory's parent, the uncommitted changes\n"
+" are merged into the requested changeset and the merged\n"
+" result is left uncommitted. If the requested changeset is\n"
+" not an ancestor or descendant (that is, it is on another\n"
+" branch), the update is aborted and the uncommitted changes\n"
+" are preserved."
+msgstr ""
+
+msgid ""
+" 2. With the -c/--check option, the update is aborted and the\n"
+" uncommitted changes are preserved."
+msgstr ""
+
+msgid ""
+" 3. With the -C/--clean option, uncommitted changes are discarded and\n"
+" the working directory is updated to the requested changeset."
+msgstr ""
+
+msgid ""
+" Use null as the changeset to remove the working directory (like\n"
+" :hg:`clone -U`)."
+msgstr ""
+
+msgid ""
+" If you want to update just one file to an older changeset, use\n"
+" :hg:`revert`."
+msgstr ""
+
+msgid "cannot specify both -c/--check and -C/--clean"
+msgstr ""
+
+msgid "uncommitted local changes"
+msgstr ""
+
+msgid "verify the integrity of the repository"
+msgstr ""
+
+msgid " Verify the integrity of the current repository."
+msgstr ""
+
+msgid ""
+" This will perform an extensive check of the repository's\n"
+" integrity, validating the hashes and checksums of each entry in\n"
+" the changelog, manifest, and tracked files, as well as the\n"
+" integrity of their crosslinks and indices."
+msgstr ""
+
+msgid "output version and copyright information"
+msgstr ""
+
+#, python-format
+msgid "Mercurial Distributed SCM (version %s)\n"
+msgstr ""
+
+msgid "(see http://mercurial.selenic.com for more information)"
+msgstr ""
+
+msgid ""
+"Copyright (C) 2005-2011 Matt Mackall and others\n"
+"This is free software; see the source for copying conditions. There is NO\n"
+"warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
+msgstr ""
+
+#, python-format
+msgid "cannot include %s (%s)"
+msgstr ""
+
+msgid "not found in manifest"
+msgstr ""
+
+#, python-format
+msgid "no such file in rev %s"
+msgstr ""
+
+msgid "branch name not in UTF-8!"
+msgstr ""
+
+#, python-format
+msgid "%s does not exist!\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"%s: up to %d MB of RAM may be required to manage this file\n"
+"(use 'hg revert %s' to cancel the pending addition)\n"
+msgstr ""
+
+#, python-format
+msgid "%s not added: only files and symlinks supported currently\n"
+msgstr ""
+
+#, python-format
+msgid "%s already tracked!\n"
+msgstr ""
+
+#, python-format
+msgid "%s not added!\n"
+msgstr ""
+
+#, python-format
+msgid "%s still exists!\n"
+msgstr ""
+
+#, python-format
+msgid "%s not tracked!\n"
+msgstr ""
+
+#, python-format
+msgid "%s not removed!\n"
+msgstr ""
+
+#, python-format
+msgid "copy failed: %s is not a file or a symbolic link\n"
+msgstr ""
+
+#, python-format
+msgid "invalid character in dag description: %s..."
+msgstr ""
+
+#, python-format
+msgid "expected id %i, got %i"
+msgstr ""
+
+#, python-format
+msgid "parent id %i is larger than current id %i"
+msgstr ""
+
+#, python-format
+msgid "invalid event type in dag: %s"
+msgstr ""
+
+msgid "nullid"
+msgstr ""
+
+msgid "working directory state appears damaged!"
+msgstr ""
+
+#, python-format
+msgid "directory %r already in dirstate"
+msgstr ""
+
+#, python-format
+msgid "file %r in dirstate clashes with %r"
+msgstr ""
+
+#, python-format
+msgid "setting %r to other parent only allowed in merges"
+msgstr ""
+
+#, python-format
+msgid "not in dirstate: %s\n"
+msgstr ""
+
+msgid "unknown"
+msgstr "неизвесно"
+
+msgid "character device"
+msgstr ""
+
+msgid "block device"
+msgstr ""
+
+msgid "fifo"
+msgstr ""
+
+msgid "socket"
+msgstr ""
+
+msgid "directory"
+msgstr ""
+
+#, python-format
+msgid "unsupported file type (type is %s)"
+msgstr ""
+
+#, python-format
+msgid "push creates new remote branches: %s!"
+msgstr ""
+
+msgid "use 'hg push --new-branch' to create new remote branches"
+msgstr ""
+
+#, python-format
+msgid "push creates new remote heads on branch '%s'!"
+msgstr ""
+
+msgid "push creates new remote heads!"
+msgstr ""
+
+msgid "you should pull and merge or use push -f to force"
+msgstr ""
+
+msgid "did you forget to merge? use push -f to force"
+msgstr ""
+
+msgid "note: unsynced remote changes!\n"
+msgstr ""
+
+#, python-format
+msgid "abort: %s\n"
+msgstr ""
+
+#, python-format
+msgid "(%s)\n"
+msgstr ""
+
+#, python-format
+msgid "hg: parse error at %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "hg: parse error: %s\n"
+msgstr ""
+
+msgid "entering debugger - type c to continue starting hg or h for help\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"hg: command '%s' is ambiguous:\n"
+" %s\n"
+msgstr ""
+
+#, python-format
+msgid "timed out waiting for lock held by %s"
+msgstr ""
+
+#, python-format
+msgid "lock held by %s"
+msgstr ""
+
+#, python-format
+msgid "abort: %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "abort: could not lock %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "hg %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "hg: %s\n"
+msgstr ""
+
+#, python-format
+msgid "abort: %s!\n"
+msgstr "прервано: %s!\n"
+
+#, python-format
+msgid "abort: %s"
+msgstr ""
+
+msgid " empty string\n"
+msgstr ""
+
+msgid "killed!\n"
+msgstr ""
+
+#, python-format
+msgid "hg: unknown command '%s'\n"
+msgstr ""
+
+msgid "(did you forget to compile extensions?)\n"
+msgstr ""
+
+msgid "(is your Python install correct?)\n"
+msgstr ""
+
+#, python-format
+msgid "abort: error: %s\n"
+msgstr ""
+
+msgid "broken pipe\n"
+msgstr ""
+
+msgid "interrupted!\n"
+msgstr ""
+
+msgid ""
+"\n"
+"broken pipe\n"
+msgstr ""
+
+msgid "abort: out of memory\n"
+msgstr ""
+
+msgid "** unknown exception encountered, please report by visiting\n"
+msgstr ""
+
+msgid "** http://mercurial.selenic.com/wiki/BugTracker\n"
+msgstr ""
+
+#, python-format
+msgid "** Python %s\n"
+msgstr ""
+
+#, python-format
+msgid "** Mercurial Distributed SCM (version %s)\n"
+msgstr ""
+
+#, python-format
+msgid "** Extensions loaded: %s\n"
+msgstr ""
+
+#, python-format
+msgid "no definition for alias '%s'\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"No argument found for substitution of %i variable in alias '%s' definition."
+msgstr ""
+
+#, python-format
+msgid ""
+"error in definition for alias '%s': %s may only be given on the command "
+"line\n"
+msgstr ""
+
+#, python-format
+msgid "alias '%s' resolves to unknown command '%s'\n"
+msgstr ""
+
+#, python-format
+msgid "alias '%s' resolves to ambiguous command '%s'\n"
+msgstr ""
+
+#, python-format
+msgid "malformed --config option: %r (use --config section.name=value)"
+msgstr ""
+
+#, python-format
+msgid "error getting current working directory: %s"
+msgstr ""
+
+#, python-format
+msgid "extension '%s' overrides commands: %s\n"
+msgstr "расширение '%s' переопределяет команды: %s\n"
+
+msgid "option --config may not be abbreviated!"
+msgstr ""
+
+msgid "option --cwd may not be abbreviated!"
+msgstr ""
+
+msgid ""
+"Option -R has to be separated from other options (e.g. not -qR) and --"
+"repository may only be abbreviated as --repo!"
+msgstr ""
+
+#, python-format
+msgid "Time: real %.3f secs (user %.3f+%.3f sys %.3f+%.3f)\n"
+msgstr ""
+
+#, python-format
+msgid "repository '%s' is not local"
+msgstr "репозиторий '%s' не локальный"
+
+#, python-format
+msgid "no repository found in %r (.hg not found)"
+msgstr ""
+
+msgid "warning: --repository ignored\n"
+msgstr ""
+
+#, python-format
+msgid "unrecognized profiling format '%s' - Ignored\n"
+msgstr "неопознаный формат профилирования '%s' - Игнорирован\n"
+
+msgid ""
+"lsprof not available - install from http://codespeak.net/svn/user/arigo/hack/"
+"misc/lsprof/"
+msgstr ""
+"lsprof не доступен - установите с http://codespeak.net/svn/user/arigo/hack/"
+"misc/lsprof/"
+
+#, python-format
+msgid "*** failed to import extension %s from %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "*** failed to import extension %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "warning: error finding commands in %s\n"
+msgstr ""
+
+#, python-format
+msgid "couldn't find merge tool %s\n"
+msgstr ""
+
+#, python-format
+msgid "tool %s can't handle symlinks\n"
+msgstr ""
+
+#, python-format
+msgid "tool %s can't handle binary\n"
+msgstr ""
+
+#, python-format
+msgid "tool %s requires a GUI\n"
+msgstr ""
+
+#, python-format
+msgid ""
+" no tool found to merge %s\n"
+"keep (l)ocal or take (o)ther?"
+msgstr ""
+
+msgid "&Local"
+msgstr "&Локальные"
+
+msgid "&Other"
+msgstr "&Другие"
+
+#, python-format
+msgid "merging %s and %s to %s\n"
+msgstr ""
+
+#, python-format
+msgid "merging %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s.premerge not valid ('%s' is neither boolean nor %s)"
+msgstr ""
+
+#, python-format
+msgid "was merge of '%s' successful (yn)?"
+msgstr ""
+
+#, python-format
+msgid ""
+" output file %s appears unchanged\n"
+"was merge successful (yn)?"
+msgstr ""
+
+#, python-format
+msgid "merging %s failed!\n"
+msgstr ""
+
+msgid "starting revisions are not directly related"
+msgstr ""
+
+#, python-format
+msgid "inconsistent state, %s:%s is good and bad"
+msgstr ""
+
+#, python-format
+msgid "unknown bisect kind %s"
+msgstr ""
+
+msgid "disabled extensions:"
+msgstr ""
+
+msgid "Configuration Files"
+msgstr ""
+
+msgid "Date Formats"
+msgstr ""
+
+msgid "File Name Patterns"
+msgstr ""
+
+msgid "Environment Variables"
+msgstr ""
+
+msgid "Specifying Single Revisions"
+msgstr ""
+
+msgid "Specifying Multiple Revisions"
+msgstr ""
+
+msgid "Specifying Revision Sets"
+msgstr ""
+
+msgid "Diff Formats"
+msgstr ""
+
+msgid "Merge Tools"
+msgstr ""
+
+msgid "Template Usage"
+msgstr ""
+
+msgid "URL Paths"
+msgstr ""
+
+msgid "Using additional features"
+msgstr ""
+
+msgid "Subrepositories"
+msgstr ""
+
+msgid "Configuring hgweb"
+msgstr ""
+
+msgid "Glossary"
+msgstr ""
+
+msgid "syntax for Mercurial ignore files"
+msgstr ""
+
+msgid ""
+"Mercurial reads configuration data from several files, if they exist.\n"
+"Below we list the most specific file first."
+msgstr ""
+
+msgid "On Windows, these configuration files are read:"
+msgstr ""
+
+msgid ""
+"- ``<repo>\\.hg\\hgrc``\n"
+"- ``%USERPROFILE%\\.hgrc``\n"
+"- ``%USERPROFILE%\\mercurial.ini``\n"
+"- ``%HOME%\\.hgrc``\n"
+"- ``%HOME%\\mercurial.ini``\n"
+"- ``C:\\mercurial\\mercurial.ini`` (unless regkey or hgrc.d\\ or mercurial."
+"ini found)\n"
+"- ``HKEY_LOCAL_MACHINE\\SOFTWARE\\Mercurial`` (unless hgrc.d\\ or mercurial."
+"ini found)\n"
+"- ``<hg.exe-dir>\\hgrc.d\\*.rc`` (unless mercurial.ini found)\n"
+"- ``<hg.exe-dir>\\mercurial.ini``"
+msgstr ""
+
+msgid "On Unix, these files are read:"
+msgstr ""
+
+msgid ""
+"- ``<repo>/.hg/hgrc``\n"
+"- ``$HOME/.hgrc``\n"
+"- ``/etc/mercurial/hgrc``\n"
+"- ``/etc/mercurial/hgrc.d/*.rc``\n"
+"- ``<install-root>/etc/mercurial/hgrc``\n"
+"- ``<install-root>/etc/mercurial/hgrc.d/*.rc``"
+msgstr ""
+
+msgid ""
+"These files do not exist by default and you will have to create the\n"
+"appropriate configuration files yourself: global configuration like\n"
+"the username setting is typically put into\n"
+"``%USERPROFILE%\\mercurial.ini`` or ``$HOME/.hgrc`` and local\n"
+"configuration is put into the per-repository ``<repo>/.hg/hgrc`` file."
+msgstr ""
+
+msgid ""
+"If there is a per-repository configuration file which is not owned by\n"
+"the active user, Mercurial will warn you that the file is skipped::"
+msgstr ""
+
+msgid ""
+" not trusting file <repo>/.hg/hgrc from untrusted user USER, group GROUP"
+msgstr ""
+
+msgid ""
+"If this bothers you, the warning can be silenced (the file would still\n"
+"be ignored) or trust can be established. Use one of the following\n"
+"settings, the syntax is explained below:"
+msgstr ""
+
+msgid ""
+"- ``ui.report_untrusted = False``\n"
+"- ``trusted.users = USER``\n"
+"- ``trusted.groups = GROUP``"
+msgstr ""
+
+msgid ""
+"The configuration files for Mercurial use a simple ini-file format. A\n"
+"configuration file consists of sections, led by a ``[section]`` header\n"
+"and followed by ``name = value`` entries::"
+msgstr ""
+
+msgid ""
+" [ui]\n"
+" username = Firstname Lastname <firstname.lastname@example.net>\n"
+" verbose = True"
+msgstr ""
+
+msgid ""
+"The above entries will be referred to as ``ui.username`` and\n"
+"``ui.verbose``, respectively. Please see the hgrc man page for a full\n"
+"description of the possible configuration values:"
+msgstr ""
+
+msgid ""
+"- on Unix-like systems: ``man hgrc``\n"
+"- online: http://www.selenic.com/mercurial/hgrc.5.html\n"
+msgstr ""
+
+msgid "Some commands allow the user to specify a date, e.g.:"
+msgstr ""
+
+msgid ""
+"- backout, commit, import, tag: Specify the commit date.\n"
+"- log, revert, update: Select revision(s) by date."
+msgstr ""
+
+msgid "Many date formats are valid. Here are some examples:"
+msgstr ""
+
+msgid ""
+"- ``Wed Dec 6 13:18:29 2006`` (local timezone assumed)\n"
+"- ``Dec 6 13:18 -0600`` (year assumed, time offset provided)\n"
+"- ``Dec 6 13:18 UTC`` (UTC and GMT are aliases for +0000)\n"
+"- ``Dec 6`` (midnight)\n"
+"- ``13:18`` (today assumed)\n"
+"- ``3:39`` (3:39AM assumed)\n"
+"- ``3:39pm`` (15:39)\n"
+"- ``2006-12-06 13:18:29`` (ISO 8601 format)\n"
+"- ``2006-12-6 13:18``\n"
+"- ``2006-12-6``\n"
+"- ``12-6``\n"
+"- ``12/6``\n"
+"- ``12/6/6`` (Dec 6 2006)"
+msgstr ""
+
+msgid "Lastly, there is Mercurial's internal format:"
+msgstr ""
+
+msgid "- ``1165432709 0`` (Wed Dec 6 13:18:29 2006 UTC)"
+msgstr ""
+
+msgid ""
+"This is the internal representation format for dates. The first number\n"
+"is the number of seconds since the epoch (1970-01-01 00:00 UTC). The\n"
+"second is the offset of the local timezone, in seconds west of UTC\n"
+"(negative if the timezone is east of UTC)."
+msgstr ""
+
+msgid "The log command also accepts date ranges:"
+msgstr ""
+
+msgid ""
+"- ``<DATE`` - at or before a given date/time\n"
+"- ``>DATE`` - on or after a given date/time\n"
+"- ``DATE to DATE`` - a date range, inclusive\n"
+"- ``-DAYS`` - within a given number of days of today\n"
+msgstr ""
+
+msgid ""
+"Mercurial's default format for showing changes between two versions of\n"
+"a file is compatible with the unified format of GNU diff, which can be\n"
+"used by GNU patch and many other standard tools."
+msgstr ""
+
+msgid ""
+"While this standard format is often enough, it does not encode the\n"
+"following information:"
+msgstr ""
+
+msgid ""
+"- executable status and other permission bits\n"
+"- copy or rename information\n"
+"- changes in binary files\n"
+"- creation or deletion of empty files"
+msgstr ""
+
+msgid ""
+"Mercurial also supports the extended diff format from the git VCS\n"
+"which addresses these limitations. The git diff format is not produced\n"
+"by default because a few widespread tools still do not understand this\n"
+"format."
+msgstr ""
+
+msgid ""
+"This means that when generating diffs from a Mercurial repository\n"
+"(e.g. with :hg:`export`), you should be careful about things like file\n"
+"copies and renames or other things mentioned above, because when\n"
+"applying a standard diff to a different repository, this extra\n"
+"information is lost. Mercurial's internal operations (like push and\n"
+"pull) are not affected by this, because they use an internal binary\n"
+"format for communicating changes."
+msgstr ""
+
+msgid ""
+"To make Mercurial produce the git extended diff format, use the --git\n"
+"option available for many commands, or set 'git = True' in the [diff]\n"
+"section of your configuration file. You do not need to set this option\n"
+"when importing diffs in this format or using them in the mq extension.\n"
+msgstr ""
+
+msgid ""
+"HG\n"
+" Path to the 'hg' executable, automatically passed when running\n"
+" hooks, extensions or external tools. If unset or empty, this is\n"
+" the hg executable's name if it's frozen, or an executable named\n"
+" 'hg' (with %PATHEXT% [defaulting to COM/EXE/BAT/CMD] extensions on\n"
+" Windows) is searched."
+msgstr ""
+
+msgid ""
+"HGEDITOR\n"
+" This is the name of the editor to run when committing. See EDITOR."
+msgstr ""
+
+msgid " (deprecated, use configuration file)"
+msgstr ""
+
+msgid ""
+"HGENCODING\n"
+" This overrides the default locale setting detected by Mercurial.\n"
+" This setting is used to convert data including usernames,\n"
+" changeset descriptions, tag names, and branches. This setting can\n"
+" be overridden with the --encoding command-line option."
+msgstr ""
+
+msgid ""
+"HGENCODINGMODE\n"
+" This sets Mercurial's behavior for handling unknown characters\n"
+" while transcoding user input. The default is \"strict\", which\n"
+" causes Mercurial to abort if it can't map a character. Other\n"
+" settings include \"replace\", which replaces unknown characters, and\n"
+" \"ignore\", which drops them. This setting can be overridden with\n"
+" the --encodingmode command-line option."
+msgstr ""
+
+msgid ""
+"HGENCODINGAMBIGUOUS\n"
+" This sets Mercurial's behavior for handling characters with\n"
+" \"ambiguous\" widths like accented Latin characters with East Asian\n"
+" fonts. By default, Mercurial assumes ambiguous characters are\n"
+" narrow, set this variable to \"wide\" if such characters cause\n"
+" formatting problems."
+msgstr ""
+
+msgid ""
+"HGMERGE\n"
+" An executable to use for resolving merge conflicts. The program\n"
+" will be executed with three arguments: local file, remote file,\n"
+" ancestor file."
+msgstr ""
+
+msgid ""
+"HGRCPATH\n"
+" A list of files or directories to search for configuration\n"
+" files. Item separator is \":\" on Unix, \";\" on Windows. If HGRCPATH\n"
+" is not set, platform default search path is used. If empty, only\n"
+" the .hg/hgrc from the current repository is read."
+msgstr ""
+
+msgid " For each element in HGRCPATH:"
+msgstr ""
+
+msgid ""
+" - if it's a directory, all files ending with .rc are added\n"
+" - otherwise, the file itself will be added"
+msgstr ""
+
+msgid ""
+"HGPLAIN\n"
+" When set, this disables any configuration settings that might\n"
+" change Mercurial's default output. This includes encoding,\n"
+" defaults, verbose mode, debug mode, quiet mode, tracebacks, and\n"
+" localization. This can be useful when scripting against Mercurial\n"
+" in the face of existing user configuration."
+msgstr ""
+
+msgid ""
+" Equivalent options set via command line flags or environment\n"
+" variables are not overridden."
+msgstr ""
+
+msgid ""
+"HGPLAINEXCEPT\n"
+" This is a comma-separated list of features to preserve when\n"
+" HGPLAIN is enabled. Currently the only value supported is \"i18n\",\n"
+" which preserves internationalization in plain mode."
+msgstr ""
+
+msgid ""
+" Setting HGPLAINEXCEPT to anything (even an empty string) will\n"
+" enable plain mode."
+msgstr ""
+
+msgid ""
+"HGUSER\n"
+" This is the string used as the author of a commit. If not set,\n"
+" available values will be considered in this order:"
+msgstr ""
+
+msgid ""
+" - HGUSER (deprecated)\n"
+" - configuration files from the HGRCPATH\n"
+" - EMAIL\n"
+" - interactive prompt\n"
+" - LOGNAME (with ``@hostname`` appended)"
+msgstr ""
+
+msgid ""
+"EMAIL\n"
+" May be used as the author of a commit; see HGUSER."
+msgstr ""
+
+msgid ""
+"LOGNAME\n"
+" May be used as the author of a commit; see HGUSER."
+msgstr ""
+
+msgid ""
+"VISUAL\n"
+" This is the name of the editor to use when committing. See EDITOR."
+msgstr ""
+
+msgid ""
+"EDITOR\n"
+" Sometimes Mercurial needs to open a text file in an editor for a\n"
+" user to modify, for example when writing commit messages. The\n"
+" editor it uses is determined by looking at the environment\n"
+" variables HGEDITOR, VISUAL and EDITOR, in that order. The first\n"
+" non-empty one is chosen. If all of them are empty, the editor\n"
+" defaults to 'vi'."
+msgstr ""
+
+msgid ""
+"PYTHONPATH\n"
+" This is used by Python to find imported modules and may need to be\n"
+" set appropriately if this Mercurial is not installed system-wide.\n"
+msgstr ""
+
+msgid ""
+"Mercurial has the ability to add new features through the use of\n"
+"extensions. Extensions may add new commands, add options to\n"
+"existing commands, change the default behavior of commands, or\n"
+"implement hooks."
+msgstr ""
+
+msgid ""
+"Extensions are not loaded by default for a variety of reasons:\n"
+"they can increase startup overhead; they may be meant for advanced\n"
+"usage only; they may provide potentially dangerous abilities (such\n"
+"as letting you destroy or modify history); they might not be ready\n"
+"for prime time; or they may alter some usual behaviors of stock\n"
+"Mercurial. It is thus up to the user to activate extensions as\n"
+"needed."
+msgstr ""
+
+msgid ""
+"To enable the \"foo\" extension, either shipped with Mercurial or in the\n"
+"Python search path, create an entry for it in your configuration file,\n"
+"like this::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" foo ="
+msgstr ""
+
+msgid "You may also specify the full path to an extension::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" myfeature = ~/.hgext/myfeature.py"
+msgstr ""
+
+msgid ""
+"To explicitly disable an extension enabled in a configuration file of\n"
+"broader scope, prepend its path with !::"
+msgstr ""
+
+msgid ""
+" [extensions]\n"
+" # disabling extension bar residing in /path/to/extension/bar.py\n"
+" bar = !/path/to/extension/bar.py\n"
+" # ditto, but no path was supplied for extension baz\n"
+" baz = !\n"
+msgstr ""
+
+msgid ""
+"Ancestor\n"
+" Any changeset that can be reached by an unbroken chain of parent\n"
+" changesets from a given changeset. More precisely, the ancestors\n"
+" of a changeset can be defined by two properties: a parent of a\n"
+" changeset is an ancestor, and a parent of an ancestor is an\n"
+" ancestor. See also: 'Descendant'."
+msgstr ""
+
+msgid ""
+"Branch\n"
+" (Noun) A child changeset that has been created from a parent that\n"
+" is not a head. These are known as topological branches, see\n"
+" 'Branch, topological'. If a topological branch is named, it becomes\n"
+" a named branch. If a topological branch is not named, it becomes\n"
+" an anonymous branch. See 'Branch, anonymous' and 'Branch, named'."
+msgstr ""
+
+msgid ""
+" Branches may be created when changes are pulled from or pushed to\n"
+" a remote repository, since new heads may be created by these\n"
+" operations. Note that the term branch can also be used informally\n"
+" to describe a development process in which certain development is\n"
+" done independently of other development. This is sometimes done\n"
+" explicitly with a named branch, but it can also be done locally,\n"
+" using bookmarks or clones and anonymous branches."
+msgstr ""
+
+msgid " Example: \"The experimental branch\"."
+msgstr ""
+
+msgid ""
+" (Verb) The action of creating a child changeset which results in\n"
+" its parent having more than one child."
+msgstr ""
+
+msgid " Example: \"I'm going to branch at X\"."
+msgstr ""
+
+msgid ""
+"Branch, anonymous\n"
+" Every time a new child changeset is created from a parent that is not\n"
+" a head and the name of the branch is not changed, a new anonymous\n"
+" branch is created."
+msgstr ""
+
+msgid ""
+"Branch, closed\n"
+" A named branch whose branch heads have all been closed."
+msgstr ""
+
+msgid ""
+"Branch, default\n"
+" The branch assigned to a changeset when no name has previously been\n"
+" assigned."
+msgstr ""
+
+msgid ""
+"Branch head\n"
+" See 'Head, branch'."
+msgstr ""
+
+msgid ""
+"Branch, inactive\n"
+" If a named branch has no topological heads, it is considered to be\n"
+" inactive. As an example, a feature branch becomes inactive when it\n"
+" is merged into the default branch. The :hg:`branches` command\n"
+" shows inactive branches by default, though they can be hidden with\n"
+" :hg:`branches --active`."
+msgstr ""
+
+msgid ""
+" NOTE: this concept is deprecated because it is too implicit.\n"
+" Branches should now be explicitly closed using :hg:`commit\n"
+" --close-branch` when they are no longer needed."
+msgstr ""
+
+msgid ""
+"Branch, named\n"
+" A collection of changesets which have the same branch name. By\n"
+" default, children of a changeset in a named branch belong to the\n"
+" same named branch. A child can be explicitly assigned to a\n"
+" different branch. See :hg:`help branch`, :hg:`help branches` and\n"
+" :hg:`commit --close-branch` for more information on managing\n"
+" branches."
+msgstr ""
+
+msgid ""
+" Named branches can be thought of as a kind of namespace, dividing\n"
+" the collection of changesets that comprise the repository into a\n"
+" collection of disjoint subsets. A named branch is not necessarily\n"
+" a topological branch. If a new named branch is created from the\n"
+" head of another named branch, or the default branch, but no\n"
+" further changesets are added to that previous branch, then that\n"
+" previous branch will be a branch in name only."
+msgstr ""
+
+msgid ""
+"Branch tip\n"
+" See 'Tip, branch'."
+msgstr ""
+
+msgid ""
+"Branch, topological\n"
+" Every time a new child changeset is created from a parent that is\n"
+" not a head, a new topological branch is created. If a topological\n"
+" branch is named, it becomes a named branch. If a topological\n"
+" branch is not named, it becomes an anonymous branch of the\n"
+" current, possibly default, branch."
+msgstr ""
+
+msgid ""
+"Changelog\n"
+" A record of the changesets in the order in which they were added\n"
+" to the repository. This includes details such as changeset id,\n"
+" author, commit message, date, and list of changed files."
+msgstr ""
+
+msgid ""
+"Changeset\n"
+" A snapshot of the state of the repository used to record a change."
+msgstr ""
+
+msgid ""
+"Changeset, child\n"
+" The converse of parent changeset: if P is a parent of C, then C is\n"
+" a child of P. There is no limit to the number of children that a\n"
+" changeset may have."
+msgstr ""
+
+msgid ""
+"Changeset id\n"
+" A SHA-1 hash that uniquely identifies a changeset. It may be\n"
+" represented as either a \"long\" 40 hexadecimal digit string, or a\n"
+" \"short\" 12 hexadecimal digit string."
+msgstr ""
+
+msgid ""
+"Changeset, merge\n"
+" A changeset with two parents. This occurs when a merge is\n"
+" committed."
+msgstr ""
+
+msgid ""
+"Changeset, parent\n"
+" A revision upon which a child changeset is based. Specifically, a\n"
+" parent changeset of a changeset C is a changeset whose node\n"
+" immediately precedes C in the DAG. Changesets have at most two\n"
+" parents."
+msgstr ""
+
+msgid ""
+"Checkout\n"
+" (Noun) The working directory being updated to a specific\n"
+" revision. This use should probably be avoided where possible, as\n"
+" changeset is much more appropriate than checkout in this context."
+msgstr ""
+
+msgid " Example: \"I'm using checkout X.\""
+msgstr ""
+
+msgid ""
+" (Verb) Updating the working directory to a specific changeset. See\n"
+" :hg:`help update`."
+msgstr ""
+
+msgid " Example: \"I'm going to check out changeset X.\""
+msgstr ""
+
+msgid ""
+"Child changeset\n"
+" See 'Changeset, child'."
+msgstr ""
+
+msgid ""
+"Close changeset\n"
+" See 'Changeset, close'."
+msgstr ""
+
+msgid ""
+"Closed branch\n"
+" See 'Branch, closed'."
+msgstr ""
+
+msgid ""
+"Clone\n"
+" (Noun) An entire or partial copy of a repository. The partial\n"
+" clone must be in the form of a revision and its ancestors."
+msgstr ""
+
+msgid " Example: \"Is your clone up to date?\"."
+msgstr ""
+
+msgid " (Verb) The process of creating a clone, using :hg:`clone`."
+msgstr ""
+
+msgid " Example: \"I'm going to clone the repository\"."
+msgstr ""
+
+msgid ""
+"Closed branch head\n"
+" See 'Head, closed branch'."
+msgstr ""
+
+msgid ""
+"Commit\n"
+" (Noun) A synonym for changeset."
+msgstr ""
+
+msgid " Example: \"Is the bug fixed in your recent commit?\""
+msgstr ""
+
+msgid ""
+" (Verb) The act of recording changes to a repository. When files\n"
+" are committed in a working directory, Mercurial finds the\n"
+" differences between the committed files and their parent\n"
+" changeset, creating a new changeset in the repository."
+msgstr ""
+
+msgid " Example: \"You should commit those changes now.\""
+msgstr ""
+
+msgid ""
+"Cset\n"
+" A common abbreviation of the term changeset."
+msgstr ""
+
+msgid ""
+"DAG\n"
+" The repository of changesets of a distributed version control\n"
+" system (DVCS) can be described as a directed acyclic graph (DAG),\n"
+" consisting of nodes and edges, where nodes correspond to\n"
+" changesets and edges imply a parent -> child relation. This graph\n"
+" can be visualized by graphical tools such as :hg:`glog`\n"
+" (graphlog). In Mercurial, the DAG is limited by the requirement\n"
+" for children to have at most two parents."
+msgstr ""
+
+msgid ""
+"Default branch\n"
+" See 'Branch, default'."
+msgstr ""
+
+msgid ""
+"Descendant\n"
+" Any changeset that can be reached by a chain of child changesets\n"
+" from a given changeset. More precisely, the descendants of a\n"
+" changeset can be defined by two properties: the child of a\n"
+" changeset is a descendant, and the child of a descendant is a\n"
+" descendant. See also: 'Ancestor'."
+msgstr ""
+
+msgid ""
+"Diff\n"
+" (Noun) The difference between the contents and attributes of files\n"
+" in two changesets or a changeset and the current working\n"
+" directory. The difference is usually represented in a standard\n"
+" form called a \"diff\" or \"patch\". The \"git diff\" format is used\n"
+" when the changes include copies, renames, or changes to file\n"
+" attributes, none of which can be represented/handled by classic\n"
+" \"diff\" and \"patch\"."
+msgstr ""
+
+msgid " Example: \"Did you see my correction in the diff?\""
+msgstr ""
+
+msgid ""
+" (Verb) Diffing two changesets is the action of creating a diff or\n"
+" patch."
+msgstr ""
+
+msgid ""
+" Example: \"If you diff with changeset X, you will see what I mean.\""
+msgstr ""
+
+msgid ""
+"Directory, working\n"
+" The working directory represents the state of the files tracked by\n"
+" Mercurial, that will be recorded in the next commit. The working\n"
+" directory initially corresponds to the snapshot at an existing\n"
+" changeset, known as the parent of the working directory. See\n"
+" 'Parent, working directory'. The state may be modified by changes\n"
+" to the files introduced manually or by a merge. The repository\n"
+" metadata exists in the .hg directory inside the working directory."
+msgstr ""
+
+msgid ""
+"Graph\n"
+" See DAG and :hg:`help graphlog`."
+msgstr ""
+
+msgid ""
+"Head\n"
+" The term 'head' may be used to refer to both a branch head or a\n"
+" repository head, depending on the context. See 'Head, branch' and\n"
+" 'Head, repository' for specific definitions."
+msgstr ""
+
+msgid ""
+" Heads are where development generally takes place and are the\n"
+" usual targets for update and merge operations."
+msgstr ""
+
+msgid ""
+"Head, branch\n"
+" A changeset with no descendants on the same named branch."
+msgstr ""
+
+msgid ""
+"Head, closed branch\n"
+" A changeset that marks a head as no longer interesting. The closed\n"
+" head is no longer listed by :hg:`heads`. A branch is considered\n"
+" closed when all its heads are closed and consequently is not\n"
+" listed by :hg:`branches`."
+msgstr ""
+
+msgid ""
+"Head, repository\n"
+" A topological head which has not been closed."
+msgstr ""
+
+msgid ""
+"Head, topological\n"
+" A changeset with no children in the repository."
+msgstr ""
+
+msgid ""
+"History, immutable\n"
+" Once committed, changesets cannot be altered. Extensions which\n"
+" appear to change history actually create new changesets that\n"
+" replace existing ones, and then destroy the old changesets. Doing\n"
+" so in public repositories can result in old changesets being\n"
+" reintroduced to the repository."
+msgstr ""
+
+msgid ""
+"History, rewriting\n"
+" The changesets in a repository are immutable. However, extensions\n"
+" to Mercurial can be used to alter the repository, usually in such\n"
+" a way as to preserve changeset contents."
+msgstr ""
+
+msgid ""
+"Immutable history\n"
+" See 'History, immutable'."
+msgstr ""
+
+msgid ""
+"Merge changeset\n"
+" See 'Changeset, merge'."
+msgstr ""
+
+msgid ""
+"Manifest\n"
+" Each changeset has a manifest, which is the list of files that are\n"
+" tracked by the changeset."
+msgstr ""
+
+msgid ""
+"Merge\n"
+" Used to bring together divergent branches of work. When you update\n"
+" to a changeset and then merge another changeset, you bring the\n"
+" history of the latter changeset into your working directory. Once\n"
+" conflicts are resolved (and marked), this merge may be committed\n"
+" as a merge changeset, bringing two branches together in the DAG."
+msgstr ""
+
+msgid ""
+"Named branch\n"
+" See 'Branch, named'."
+msgstr ""
+
+msgid ""
+"Null changeset\n"
+" The empty changeset. It is the parent state of newly-initialized\n"
+" repositories and repositories with no checked out revision. It is\n"
+" thus the parent of root changesets and the effective ancestor when\n"
+" merging unrelated changesets. Can be specified by the alias 'null'\n"
+" or by the changeset ID '000000000000'."
+msgstr ""
+
+msgid ""
+"Parent\n"
+" See 'Changeset, parent'."
+msgstr ""
+
+msgid ""
+"Parent changeset\n"
+" See 'Changeset, parent'."
+msgstr ""
+
+msgid ""
+"Parent, working directory\n"
+" The working directory parent reflects a virtual revision which is\n"
+" the child of the changeset (or two changesets with an uncommitted\n"
+" merge) shown by :hg:`parents`. This is changed with\n"
+" :hg:`update`. Other commands to see the working directory parent\n"
+" are :hg:`summary` and :hg:`id`. Can be specified by the alias \".\"."
+msgstr ""
+
+msgid ""
+"Patch\n"
+" (Noun) The product of a diff operation."
+msgstr ""
+
+msgid " Example: \"I've sent you my patch.\""
+msgstr ""
+
+msgid ""
+" (Verb) The process of using a patch file to transform one\n"
+" changeset into another."
+msgstr ""
+
+msgid " Example: \"You will need to patch that revision.\""
+msgstr ""
+
+msgid ""
+"Pull\n"
+" An operation in which changesets in a remote repository which are\n"
+" not in the local repository are brought into the local\n"
+" repository. Note that this operation without special arguments\n"
+" only updates the repository, it does not update the files in the\n"
+" working directory. See :hg:`help pull`."
+msgstr ""
+
+msgid ""
+"Push\n"
+" An operation in which changesets in a local repository which are\n"
+" not in a remote repository are sent to the remote repository. Note\n"
+" that this operation only adds changesets which have been committed\n"
+" locally to the remote repository. Uncommitted changes are not\n"
+" sent. See :hg:`help push`."
+msgstr ""
+
+msgid ""
+"Repository\n"
+" The metadata describing all recorded states of a collection of\n"
+" files. Each recorded state is represented by a changeset. A\n"
+" repository is usually (but not always) found in the ``.hg``\n"
+" subdirectory of a working directory. Any recorded state can be\n"
+" recreated by \"updating\" a working directory to a specific\n"
+" changeset."
+msgstr ""
+
+msgid ""
+"Repository head\n"
+" See 'Head, repository'."
+msgstr ""
+
+msgid ""
+"Revision\n"
+" A state of the repository at some point in time. Earlier revisions\n"
+" can be updated to by using :hg:`update`. See also 'Revision\n"
+" number'; See also 'Changeset'."
+msgstr ""
+
+msgid ""
+"Revision number\n"
+" This integer uniquely identifies a changeset in a specific\n"
+" repository. It represents the order in which changesets were added\n"
+" to a repository, starting with revision number 0. Note that the\n"
+" revision number may be different in each clone of a repository. To\n"
+" identify changesets uniquely between different clones, see\n"
+" 'Changeset id'."
+msgstr ""
+
+msgid ""
+"Revlog\n"
+" History storage mechanism used by Mercurial. It is a form of delta\n"
+" encoding, with occasional full revision of data followed by delta\n"
+" of each successive revision. It includes data and an index\n"
+" pointing to the data."
+msgstr ""
+
+msgid ""
+"Rewriting history\n"
+" See 'History, rewriting'."
+msgstr ""
+
+msgid ""
+"Root\n"
+" A changeset that has only the null changeset as its parent. Most\n"
+" repositories have only a single root changeset."
+msgstr ""
+
+msgid ""
+"Tip\n"
+" The changeset with the highest revision number. It is the changeset\n"
+" most recently added in a repository."
+msgstr ""
+
+msgid ""
+"Tip, branch\n"
+" The head of a given branch with the highest revision number. When\n"
+" a branch name is used as a revision identifier, it refers to the\n"
+" branch tip. See also 'Branch, head'. Note that because revision\n"
+" numbers may be different in different repository clones, the\n"
+" branch tip may be different in different cloned repositories."
+msgstr ""
+
+msgid ""
+"Update\n"
+" (Noun) Another synonym of changeset."
+msgstr ""
+
+msgid " Example: \"I've pushed an update\"."
+msgstr ""
+
+msgid ""
+" (Verb) This term is usually used to describe updating the state of\n"
+" the working directory to that of a specific changeset. See\n"
+" :hg:`help update`."
+msgstr ""
+
+msgid " Example: \"You should update\"."
+msgstr ""
+
+msgid ""
+"Working directory\n"
+" See 'Directory, working'."
+msgstr ""
+
+msgid ""
+"Working directory parent\n"
+" See 'Parent, working directory'.\n"
+msgstr ""
+
+msgid ""
+"Synopsis\n"
+"--------"
+msgstr ""
+
+msgid ""
+"The Mercurial system uses a file called ``.hgignore`` in the root\n"
+"directory of a repository to control its behavior when it searches\n"
+"for files that it is not currently tracking."
+msgstr ""
+
+msgid ""
+"Description\n"
+"-----------"
+msgstr ""
+
+msgid ""
+"The working directory of a Mercurial repository will often contain\n"
+"files that should not be tracked by Mercurial. These include backup\n"
+"files created by editors and build products created by compilers.\n"
+"These files can be ignored by listing them in a ``.hgignore`` file in\n"
+"the root of the working directory. The ``.hgignore`` file must be\n"
+"created manually. It is typically put under version control, so that\n"
+"the settings will propagate to other repositories with push and pull."
+msgstr ""
+
+msgid ""
+"An untracked file is ignored if its path relative to the repository\n"
+"root directory, or any prefix path of that path, is matched against\n"
+"any pattern in ``.hgignore``."
+msgstr ""
+
+msgid ""
+"For example, say we have an untracked file, ``file.c``, at\n"
+"``a/b/file.c`` inside our repository. Mercurial will ignore ``file.c``\n"
+"if any pattern in ``.hgignore`` matches ``a/b/file.c``, ``a/b`` or ``a``."
+msgstr ""
+
+msgid ""
+"In addition, a Mercurial configuration file can reference a set of\n"
+"per-user or global ignore files. See the\n"
+"``http://www.selenic.com/mercurial/hgrc.5.html`` man page for details\n"
+"of how to configure these files. Look for the \"ignore\" entry in the\n"
+"\"ui\" section."
+msgstr ""
+
+msgid ""
+"To control Mercurial's handling of files that it manages, see the\n"
+"``http://www.selenic.com/mercurial/hg.1.html`` man page. Look for\n"
+"the ``-I`` and ``-X`` options."
+msgstr ""
+
+msgid ""
+"Syntax\n"
+"------"
+msgstr ""
+
+msgid ""
+"An ignore file is a plain text file consisting of a list of patterns,\n"
+"with one pattern per line. Empty lines are skipped. The ``#``\n"
+"character is treated as a comment character, and the ``\\`` character\n"
+"is treated as an escape character."
+msgstr ""
+
+msgid ""
+"Mercurial supports several pattern syntaxes. The default syntax used\n"
+"is Python/Perl-style regular expressions."
+msgstr ""
+
+msgid "To change the syntax used, use a line of the following form::"
+msgstr ""
+
+msgid " syntax: NAME"
+msgstr ""
+
+msgid "where ``NAME`` is one of the following:"
+msgstr ""
+
+msgid ""
+"``regexp``\n"
+" Regular expression, Python/Perl syntax.\n"
+"``glob``\n"
+" Shell-style glob."
+msgstr ""
+
+msgid ""
+"The chosen syntax stays in effect when parsing all patterns that\n"
+"follow, until another syntax is selected."
+msgstr ""
+
+msgid ""
+"Neither glob nor regexp patterns are rooted. A glob-syntax pattern of\n"
+"the form ``*.c`` will match a file ending in ``.c`` in any directory,\n"
+"and a regexp pattern of the form ``\\.c$`` will do the same. To root a\n"
+"regexp pattern, start it with ``^``."
+msgstr ""
+
+msgid ""
+"Example\n"
+"-------"
+msgstr ""
+
+msgid "Here is an example ignore file. ::"
+msgstr ""
+
+msgid ""
+" # use glob syntax.\n"
+" syntax: glob"
+msgstr ""
+
+msgid ""
+" *.elc\n"
+" *.pyc\n"
+" *~"
+msgstr ""
+
+msgid ""
+" # switch to regexp syntax.\n"
+" syntax: regexp\n"
+" ^\\.pc/\n"
+msgstr ""
+
+msgid ""
+"Mercurial's internal web server, hgweb, can serve either a single\n"
+"repository, or a collection of them. In the latter case, a special\n"
+"configuration file can be used to specify the repository paths to use\n"
+"and global web configuration options."
+msgstr ""
+
+msgid ""
+"This file uses the same syntax as other Mercurial configuration files,\n"
+"but only the following sections are recognized:"
+msgstr ""
+
+msgid ""
+" - web\n"
+" - paths\n"
+" - collections"
+msgstr ""
+
+msgid ""
+"The ``web`` section can specify all the settings described in the web\n"
+"section of the hgrc(5) documentation. See :hg:`help config` for\n"
+"information on where to find the manual page."
+msgstr ""
+
+msgid ""
+"The ``paths`` section provides mappings of physical repository\n"
+"paths to virtual ones. For instance::"
+msgstr ""
+
+msgid ""
+" [paths]\n"
+" projects/a = /foo/bar\n"
+" projects/b = /baz/quux\n"
+" web/root = /real/root/*\n"
+" / = /real/root2/*\n"
+" virtual/root2 = /real/root2/**"
+msgstr ""
+
+msgid ""
+"- The first two entries make two repositories in different directories\n"
+" appear under the same directory in the web interface\n"
+"- The third entry maps every Mercurial repository found in '/real/root'\n"
+" into 'web/root'. This format is preferred over the [collections] one,\n"
+" since using absolute paths as configuration keys is not supported on "
+"every\n"
+" platform (especially on Windows).\n"
+"- The fourth entry is a special case mapping all repositories in\n"
+" '/real/root2' in the root of the virtual directory.\n"
+"- The fifth entry recursively finds all repositories under the real\n"
+" root, and maps their relative paths under the virtual root."
+msgstr ""
+
+msgid ""
+"The ``collections`` section provides mappings of trees of physical\n"
+"repositories paths to virtual ones, though the paths syntax is generally\n"
+"preferred. For instance::"
+msgstr ""
+
+msgid ""
+" [collections]\n"
+" /foo = /foo"
+msgstr ""
+
+msgid ""
+"Here, the left side will be stripped off all repositories found in the\n"
+"right side. Thus ``/foo/bar`` and ``foo/quux/baz`` will be listed as\n"
+"``bar`` and ``quux/baz`` respectively.\n"
+msgstr ""
+
+msgid "To merge files Mercurial uses merge tools."
+msgstr ""
+
+msgid ""
+"A merge tool combines two different versions of a file into a merged\n"
+"file. Merge tools are given the two files and the greatest common\n"
+"ancestor of the two file versions, so they can determine the changes\n"
+"made on both branches."
+msgstr ""
+
+msgid ""
+"Merge tools are used both for :hg:`resolve`, :hg:`merge`, :hg:`update`,\n"
+":hg:`backout` and in several extensions."
+msgstr ""
+
+msgid ""
+"Usually, the merge tool tries to automatically reconcile the files by\n"
+"combining all non-overlapping changes that occurred separately in\n"
+"the two different evolutions of the same initial base file. Furthermore, "
+"some\n"
+"interactive merge programs make it easier to manually resolve\n"
+"conflicting merges, either in a graphical way, or by inserting some\n"
+"conflict markers. Mercurial does not include any interactive merge\n"
+"programs but relies on external tools for that."
+msgstr ""
+
+msgid ""
+"Available merge tools\n"
+"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\""
+msgstr ""
+
+msgid ""
+"External merge tools and their properties are configured in the\n"
+"merge-tools configuration section - see hgrc(5) - but they can often just\n"
+"be named by their executable."
+msgstr ""
+
+msgid ""
+"A merge tool is generally usable if its executable can be found on the\n"
+"system and if it can handle the merge. The executable is found if it\n"
+"is an absolute or relative executable path or the name of an\n"
+"application in the executable search path. The tool is assumed to be\n"
+"able to handle the merge if it can handle symlinks if the file is a\n"
+"symlink, if it can handle binary files if the file is binary, and if a\n"
+"GUI is available if the tool requires a GUI."
+msgstr ""
+
+msgid ""
+"There are some internal merge tools which can be used. The internal\n"
+"merge tools are:"
+msgstr ""
+
+msgid ""
+"``internal:merge``\n"
+" Uses the internal non-interactive simple merge algorithm for merging\n"
+" files. It will fail if there are any conflicts and leave markers in\n"
+" the partially merged file."
+msgstr ""
+
+msgid ""
+"``internal:fail``\n"
+" Rather than attempting to merge files that were modified on both\n"
+" branches, it marks them as unresolved. The resolve command must be\n"
+" used to resolve these conflicts."
+msgstr ""
+
+msgid ""
+"``internal:local``\n"
+" Uses the local version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:other``\n"
+" Uses the other version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:prompt``\n"
+" Asks the user which of the local or the other version to keep as\n"
+" the merged version."
+msgstr ""
+
+msgid ""
+"``internal:dump``\n"
+" Creates three versions of the files to merge, containing the\n"
+" contents of local, other and base. These files can then be used to\n"
+" perform a merge manually. If the file to be merged is named\n"
+" ``a.txt``, these files will accordingly be named ``a.txt.local``,\n"
+" ``a.txt.other`` and ``a.txt.base`` and they will be placed in the\n"
+" same directory as ``a.txt``."
+msgstr ""
+
+msgid ""
+"Internal tools are always available and do not require a GUI but will by "
+"default\n"
+"not handle symlinks or binary files."
+msgstr ""
+
+msgid ""
+"Choosing a merge tool\n"
+"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\""
+msgstr ""
+
+msgid "Mercurial uses these rules when deciding which merge tool to use:"
+msgstr ""
+
+msgid ""
+"1. If a tool has been specified with the --tool option to merge or resolve, "
+"it\n"
+" is used. If it is the name of a tool in the merge-tools configuration, "
+"its\n"
+" configuration is used. Otherwise the specified tool must be executable "
+"by\n"
+" the shell."
+msgstr ""
+
+msgid ""
+"2. If the ``HGMERGE`` environment variable is present, its value is used "
+"and\n"
+" must be executable by the shell."
+msgstr ""
+
+msgid ""
+"3. If the filename of the file to be merged matches any of the patterns in "
+"the\n"
+" merge-patterns configuration section, the first usable merge tool\n"
+" corresponding to a matching pattern is used. Here, binary capabilities of "
+"the\n"
+" merge tool are not considered."
+msgstr ""
+
+msgid ""
+"4. If ui.merge is set it will be considered next. If the value is not the "
+"name\n"
+" of a configured tool, the specified value is used and must be executable "
+"by\n"
+" the shell. Otherwise the named tool is used if it is usable."
+msgstr ""
+
+msgid ""
+"5. If any usable merge tools are present in the merge-tools configuration\n"
+" section, the one with the highest priority is used."
+msgstr ""
+
+msgid ""
+"6. If a program named ``hgmerge`` can be found on the system, it is used - "
+"but\n"
+" it will by default not be used for symlinks and binary files."
+msgstr ""
+
+msgid ""
+"7. If the file to be merged is not binary and is not a symlink, then\n"
+" ``internal:merge`` is used."
+msgstr ""
+
+msgid "8. The merge of the file fails and must be resolved before commit."
+msgstr ""
+
+msgid ""
+".. note::\n"
+" After selecting a merge program, Mercurial will by default attempt\n"
+" to merge the files using a simple merge algorithm first. Only if it "
+"doesn't\n"
+" succeed because of conflicting changes Mercurial will actually execute "
+"the\n"
+" merge program. Whether to use the simple merge algorithm first can be\n"
+" controlled by the premerge setting of the merge tool. Premerge is enabled "
+"by\n"
+" default unless the file is binary or a symlink."
+msgstr ""
+
+msgid ""
+"See the merge-tools and ui sections of hgrc(5) for details on the\n"
+"configuration of merge tools.\n"
+msgstr ""
+
+msgid ""
+"When Mercurial accepts more than one revision, they may be specified\n"
+"individually, or provided as a topologically continuous range,\n"
+"separated by the \":\" character."
+msgstr ""
+
+msgid ""
+"The syntax of range notation is [BEGIN]:[END], where BEGIN and END are\n"
+"revision identifiers. Both BEGIN and END are optional. If BEGIN is not\n"
+"specified, it defaults to revision number 0. If END is not specified,\n"
+"it defaults to the tip. The range \":\" thus means \"all revisions\"."
+msgstr ""
+
+msgid "If BEGIN is greater than END, revisions are treated in reverse order."
+msgstr ""
+
+msgid ""
+"A range acts as a closed interval. This means that a range of 3:5\n"
+"gives 3, 4 and 5. Similarly, a range of 9:6 gives 9, 8, 7, and 6.\n"
+msgstr ""
+
+msgid ""
+"Mercurial accepts several notations for identifying one or more files\n"
+"at a time."
+msgstr ""
+
+msgid ""
+"By default, Mercurial treats filenames as shell-style extended glob\n"
+"patterns."
+msgstr ""
+
+msgid "Alternate pattern notations must be specified explicitly."
+msgstr ""
+
+msgid ""
+"To use a plain path name without any pattern matching, start it with\n"
+"``path:``. These path names must completely match starting at the\n"
+"current repository root."
+msgstr ""
+
+msgid ""
+"To use an extended glob, start a name with ``glob:``. Globs are rooted\n"
+"at the current directory; a glob such as ``*.c`` will only match files\n"
+"in the current directory ending with ``.c``."
+msgstr ""
+
+msgid ""
+"The supported glob syntax extensions are ``**`` to match any string\n"
+"across path separators and ``{a,b}`` to mean \"a or b\"."
+msgstr ""
+
+msgid ""
+"To use a Perl/Python regular expression, start a name with ``re:``.\n"
+"Regexp pattern matching is anchored at the root of the repository."
+msgstr ""
+
+msgid ""
+"To read name patterns from a file, use ``listfile:`` or ``listfile0:``.\n"
+"The latter expects null delimited patterns while the former expects line\n"
+"feeds. Each string read from the file is itself treated as a file\n"
+"pattern."
+msgstr ""
+
+msgid "Plain examples::"
+msgstr ""
+
+msgid ""
+" path:foo/bar a name bar in a directory named foo in the root\n"
+" of the repository\n"
+" path:path:name a file or directory named \"path:name\""
+msgstr ""
+
+msgid "Glob examples::"
+msgstr ""
+
+msgid ""
+" glob:*.c any name ending in \".c\" in the current directory\n"
+" *.c any name ending in \".c\" in the current directory\n"
+" **.c any name ending in \".c\" in any subdirectory of the\n"
+" current directory including itself.\n"
+" foo/*.c any name ending in \".c\" in the directory foo\n"
+" foo/**.c any name ending in \".c\" in any subdirectory of foo\n"
+" including itself."
+msgstr ""
+
+msgid "Regexp examples::"
+msgstr ""
+
+msgid " re:.*\\.c$ any name ending in \".c\", anywhere in the repository"
+msgstr ""
+
+msgid "File examples::"
+msgstr ""
+
+msgid ""
+" listfile:list.txt read list from list.txt with one file pattern per line\n"
+" listfile0:list.txt read list from list.txt with null byte delimiters\n"
+msgstr ""
+
+msgid "Mercurial supports several ways to specify individual revisions."
+msgstr ""
+
+msgid ""
+"A plain integer is treated as a revision number. Negative integers are\n"
+"treated as sequential offsets from the tip, with -1 denoting the tip,\n"
+"-2 denoting the revision prior to the tip, and so forth."
+msgstr ""
+
+msgid ""
+"A 40-digit hexadecimal string is treated as a unique revision\n"
+"identifier."
+msgstr ""
+
+msgid ""
+"A hexadecimal string less than 40 characters long is treated as a\n"
+"unique revision identifier and is referred to as a short-form\n"
+"identifier. A short-form identifier is only valid if it is the prefix\n"
+"of exactly one full-length identifier."
+msgstr ""
+
+msgid ""
+"Any other string is treated as a tag or branch name. A tag name is a\n"
+"symbolic name associated with a revision identifier. A branch name\n"
+"denotes the tipmost revision of that branch. Tag and branch names must\n"
+"not contain the \":\" character."
+msgstr ""
+
+msgid ""
+"The reserved name \"tip\" is a special tag that always identifies the\n"
+"most recent revision."
+msgstr ""
+
+msgid ""
+"The reserved name \"null\" indicates the null revision. This is the\n"
+"revision of an empty repository, and the parent of revision 0."
+msgstr ""
+
+msgid ""
+"The reserved name \".\" indicates the working directory parent. If no\n"
+"working directory is checked out, it is equivalent to null. If an\n"
+"uncommitted merge is in progress, \".\" is the revision of the first\n"
+"parent.\n"
+msgstr ""
+
+msgid ""
+"Mercurial supports a functional language for selecting a set of\n"
+"revisions."
+msgstr ""
+
+msgid ""
+"The language supports a number of predicates which are joined by infix\n"
+"operators. Parenthesis can be used for grouping."
+msgstr ""
+
+msgid ""
+"Identifiers such as branch names must be quoted with single or double\n"
+"quotes if they contain characters outside of\n"
+"``[._a-zA-Z0-9\\x80-\\xff]`` or if they match one of the predefined\n"
+"predicates."
+msgstr ""
+
+msgid ""
+"Special characters can be used in quoted identifiers by escaping them,\n"
+"e.g., ``\\n`` is interpreted as a newline. To prevent them from being\n"
+"interpreted, strings can be prefixed with ``r``, e.g. ``r'...'``."
+msgstr ""
+
+msgid "There is a single prefix operator:"
+msgstr ""
+
+msgid ""
+"``not x``\n"
+" Changesets not in x. Short form is ``! x``."
+msgstr ""
+
+msgid "These are the supported infix operators:"
+msgstr ""
+
+msgid ""
+"``x::y``\n"
+" A DAG range, meaning all changesets that are descendants of x and\n"
+" ancestors of y, including x and y themselves. If the first endpoint\n"
+" is left out, this is equivalent to ``ancestors(y)``, if the second\n"
+" is left out it is equivalent to ``descendants(x)``."
+msgstr ""
+
+msgid " An alternative syntax is ``x..y``."
+msgstr ""
+
+msgid ""
+"``x:y``\n"
+" All changesets with revision numbers between x and y, both\n"
+" inclusive. Either endpoint can be left out, they default to 0 and\n"
+" tip."
+msgstr ""
+
+msgid ""
+"``x and y``\n"
+" The intersection of changesets in x and y. Short form is ``x & y``."
+msgstr ""
+
+msgid ""
+"``x or y``\n"
+" The union of changesets in x and y. There are two alternative short\n"
+" forms: ``x | y`` and ``x + y``."
+msgstr ""
+
+msgid ""
+"``x - y``\n"
+" Changesets in x but not in y.\n"
+" \n"
+"``x^n``\n"
+" The nth parent of x, n == 0, 1, or 2.\n"
+" For n == 0, x; for n == 1, the first parent of each changeset in x;\n"
+" for n == 2, the second parent of changeset in x."
+msgstr ""
+
+msgid ""
+"``x~n``\n"
+" The nth first ancestor of x; ``x~0`` is x; ``x~3`` is ``x^^^``."
+msgstr ""
+
+msgid "There is a single postfix operator:"
+msgstr ""
+
+msgid ""
+"``x^``\n"
+" Equivalent to ``x^1``, the first parent of each changeset in x."
+msgstr ""
+
+msgid ""
+"\n"
+"The following predicates are supported:"
+msgstr ""
+
+msgid ".. predicatesmarker"
+msgstr ""
+
+msgid ""
+"New predicates (known as \"aliases\") can be defined, using any combination "
+"of\n"
+"existing predicates or other aliases. An alias definition looks like::"
+msgstr ""
+
+msgid " <alias> = <definition>"
+msgstr ""
+
+msgid ""
+"in the ``revsetalias`` section of ``.hgrc``. Arguments of the form `$1`, `"
+"$2`,\n"
+"etc. are substituted from the alias into the definition."
+msgstr ""
+
+msgid "For example,"
+msgstr ""
+
+msgid ""
+" [revsetalias]\n"
+" h = heads()\n"
+" d($1) = sort($1, date)\n"
+" rs($1, $2) = reverse(sort($1, $2))"
+msgstr ""
+
+msgid ""
+"defines three aliases, ``h``, ``d``, and ``rs``. ``rs(0:tip, author)`` is\n"
+"exactly equivalent to ``reverse(sort(0:tip, author))``."
+msgstr ""
+
+msgid "Command line equivalents for :hg:`log`::"
+msgstr ""
+
+msgid ""
+" -f -> ::.\n"
+" -d x -> date(x)\n"
+" -k x -> keyword(x)\n"
+" -m -> merge()\n"
+" -u x -> user(x)\n"
+" -b x -> branch(x)\n"
+" -P x -> !::x\n"
+" -l x -> limit(expr, x)"
+msgstr ""
+
+msgid "Some sample queries:"
+msgstr ""
+
+msgid "- Changesets on the default branch::"
+msgstr ""
+
+msgid " hg log -r \"branch(default)\""
+msgstr ""
+
+msgid "- Changesets on the default branch since tag 1.5 (excluding merges)::"
+msgstr ""
+
+msgid " hg log -r \"branch(default) and 1.5:: and not merge()\""
+msgstr ""
+
+msgid "- Open branch heads::"
+msgstr ""
+
+msgid " hg log -r \"head() and not closed()\""
+msgstr ""
+
+msgid ""
+"- Changesets between tags 1.3 and 1.5 mentioning \"bug\" that affect\n"
+" ``hgext/*``::"
+msgstr ""
+
+msgid " hg log -r \"1.3::1.5 and keyword(bug) and file('hgext/*')\""
+msgstr ""
+
+msgid "- Changesets committed in May 2008, sorted by user::"
+msgstr ""
+
+msgid " hg log -r \"sort(date('May 2008'), user)\""
+msgstr ""
+
+msgid ""
+"- Changesets mentioning \"bug\" or \"issue\" that are not in a tagged\n"
+" release::"
+msgstr ""
+
+msgid ""
+" hg log -r \"(keyword(bug) or keyword(issue)) and not ancestors(tagged())"
+"\"\n"
+msgstr ""
+
+msgid ""
+"Subrepositories let you nest external repositories or projects into a\n"
+"parent Mercurial repository, and make commands operate on them as a\n"
+"group. External Mercurial and Subversion projects are currently\n"
+"supported."
+msgstr ""
+
+msgid "Subrepositories are made of three components:"
+msgstr ""
+
+msgid ""
+"1. Nested repository checkouts. They can appear anywhere in the\n"
+" parent working directory, and are Mercurial clones or Subversion\n"
+" checkouts."
+msgstr ""
+
+msgid ""
+"2. Nested repository references. They are defined in ``.hgsub`` and\n"
+" tell where the subrepository checkouts come from. Mercurial\n"
+" subrepositories are referenced like:"
+msgstr ""
+
+msgid " path/to/nested = https://example.com/nested/repo/path"
+msgstr ""
+
+msgid ""
+" where ``path/to/nested`` is the checkout location relatively to the\n"
+" parent Mercurial root, and ``https://example.com/nested/repo/path``\n"
+" is the source repository path. The source can also reference a\n"
+" filesystem path. Subversion repositories are defined with:"
+msgstr ""
+
+msgid " path/to/nested = [svn]https://example.com/nested/trunk/path"
+msgstr ""
+
+msgid ""
+" Note that ``.hgsub`` does not exist by default in Mercurial\n"
+" repositories, you have to create and add it to the parent\n"
+" repository before using subrepositories."
+msgstr ""
+
+msgid ""
+"3. Nested repository states. They are defined in ``.hgsubstate`` and\n"
+" capture whatever information is required to restore the\n"
+" subrepositories to the state they were committed in a parent\n"
+" repository changeset. Mercurial automatically record the nested\n"
+" repositories states when committing in the parent repository."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" The ``.hgsubstate`` file should not be edited manually."
+msgstr ""
+
+msgid ""
+"\n"
+"Adding a Subrepository\n"
+"----------------------"
+msgstr ""
+
+msgid ""
+"If ``.hgsub`` does not exist, create it and add it to the parent\n"
+"repository. Clone or checkout the external projects where you want it\n"
+"to live in the parent repository. Edit ``.hgsub`` and add the\n"
+"subrepository entry as described above. At this point, the\n"
+"subrepository is tracked and the next commit will record its state in\n"
+"``.hgsubstate`` and bind it to the committed changeset."
+msgstr ""
+
+msgid ""
+"Synchronizing a Subrepository\n"
+"-----------------------------"
+msgstr ""
+
+msgid ""
+"Subrepos do not automatically track the latest changeset of their\n"
+"sources. Instead, they are updated to the changeset that corresponds\n"
+"with the changeset checked out in the top-level changeset. This is so\n"
+"developers always get a consistent set of compatible code and\n"
+"libraries when they update."
+msgstr ""
+
+msgid ""
+"Thus, updating subrepos is a manual process. Simply check out target\n"
+"subrepo at the desired revision, test in the top-level repo, then\n"
+"commit in the parent repository to record the new combination."
+msgstr ""
+
+msgid ""
+"Deleting a Subrepository\n"
+"------------------------"
+msgstr ""
+
+msgid ""
+"To remove a subrepository from the parent repository, delete its\n"
+"reference from ``.hgsub``, then remove its files."
+msgstr ""
+
+msgid ""
+"Interaction with Mercurial Commands\n"
+"-----------------------------------"
+msgstr ""
+
+msgid ""
+":add: add does not recurse in subrepos unless -S/--subrepos is\n"
+" specified. Subversion subrepositories are currently silently\n"
+" ignored."
+msgstr ""
+
+msgid ""
+":archive: archive does not recurse in subrepositories unless\n"
+" -S/--subrepos is specified."
+msgstr ""
+
+msgid ""
+":commit: commit creates a consistent snapshot of the state of the\n"
+" entire project and its subrepositories. It does this by first\n"
+" attempting to commit all modified subrepositories, then recording\n"
+" their state and finally committing it in the parent\n"
+" repository. Mercurial can be made to abort if any subrepository\n"
+" content is modified by setting \"ui.commitsubrepos=no\" in a\n"
+" configuration file (see :hg:`help config`)."
+msgstr ""
+
+msgid ""
+":diff: diff does not recurse in subrepos unless -S/--subrepos is\n"
+" specified. Changes are displayed as usual, on the subrepositories\n"
+" elements. Subversion subrepositories are currently silently\n"
+" ignored."
+msgstr ""
+
+msgid ""
+":incoming: incoming does not recurse in subrepos unless -S/--subrepos\n"
+" is specified. Subversion subrepositories are currently silently\n"
+" ignored."
+msgstr ""
+
+msgid ""
+":outgoing: outgoing does not recurse in subrepos unless -S/--subrepos\n"
+" is specified. Subversion subrepositories are currently silently\n"
+" ignored."
+msgstr ""
+
+msgid ""
+":pull: pull is not recursive since it is not clear what to pull prior\n"
+" to running :hg:`update`. Listing and retrieving all\n"
+" subrepositories changes referenced by the parent repository pulled\n"
+" changesets is expensive at best, impossible in the Subversion\n"
+" case."
+msgstr ""
+
+msgid ""
+":push: Mercurial will automatically push all subrepositories first\n"
+" when the parent repository is being pushed. This ensures new\n"
+" subrepository changes are available when referenced by top-level\n"
+" repositories."
+msgstr ""
+
+msgid ""
+":status: status does not recurse into subrepositories unless\n"
+" -S/--subrepos is specified. Subrepository changes are displayed as\n"
+" regular Mercurial changes on the subrepository\n"
+" elements. Subversion subrepositories are currently silently\n"
+" ignored."
+msgstr ""
+
+msgid ""
+":update: update restores the subrepos in the state they were\n"
+" originally committed in target changeset. If the recorded\n"
+" changeset is not available in the current subrepository, Mercurial\n"
+" will pull it in first before updating. This means that updating\n"
+" can require network access when using subrepositories."
+msgstr ""
+
+msgid ""
+"Remapping Subrepositories Sources\n"
+"---------------------------------"
+msgstr ""
+
+msgid ""
+"A subrepository source location may change during a project life,\n"
+"invalidating references stored in the parent repository history. To\n"
+"fix this, rewriting rules can be defined in parent repository ``hgrc``\n"
+"file or in Mercurial configuration. See the ``[subpaths]`` section in\n"
+"hgrc(5) for more details."
+msgstr ""
+
+msgid ""
+"Mercurial allows you to customize output of commands through\n"
+"templates. You can either pass in a template from the command\n"
+"line, via the --template option, or select an existing\n"
+"template-style (--style)."
+msgstr ""
+
+msgid ""
+"You can customize output for any \"log-like\" command: log,\n"
+"outgoing, incoming, tip, parents, heads and glog."
+msgstr ""
+
+msgid ""
+"Four styles are packaged with Mercurial: default (the style used\n"
+"when no explicit preference is passed), compact, changelog,\n"
+"and xml.\n"
+"Usage::"
+msgstr ""
+
+msgid " $ hg log -r1 --style changelog"
+msgstr ""
+
+msgid ""
+"A template is a piece of text, with markup to invoke variable\n"
+"expansion::"
+msgstr ""
+
+msgid ""
+" $ hg log -r1 --template \"{node}\\n\"\n"
+" b56ce7b07c52de7d5fd79fb89701ea538af65746"
+msgstr ""
+
+msgid ""
+"Strings in curly braces are called keywords. The availability of\n"
+"keywords depends on the exact context of the templater. These\n"
+"keywords are usually available for templating a log-like command:"
+msgstr ""
+
+msgid ".. keywordsmarker"
+msgstr ""
+
+msgid ""
+"The \"date\" keyword does not produce human-readable output. If you\n"
+"want to use a date in your output, you can use a filter to process\n"
+"it. Filters are functions which return a string based on the input\n"
+"variable. Be sure to use the stringify filter first when you're\n"
+"applying a string-input filter to a list-like input variable.\n"
+"You can also use a chain of filters to get the desired output::"
+msgstr ""
+
+msgid ""
+" $ hg tip --template \"{date|isodate}\\n\"\n"
+" 2008-08-21 18:22 +0000"
+msgstr ""
+
+msgid "List of filters:"
+msgstr ""
+
+msgid ".. filtersmarker\n"
+msgstr ""
+
+msgid "Valid URLs are of the form::"
+msgstr ""
+
+msgid ""
+" local/filesystem/path[#revision]\n"
+" file://local/filesystem/path[#revision]\n"
+" http://[user[:pass]@]host[:port]/[path][#revision]\n"
+" https://[user[:pass]@]host[:port]/[path][#revision]\n"
+" ssh://[user@]host[:port]/[path][#revision]"
+msgstr ""
+
+msgid ""
+"Paths in the local filesystem can either point to Mercurial\n"
+"repositories or to bundle files (as created by :hg:`bundle` or :hg:`\n"
+"incoming --bundle`). See also :hg:`help paths`."
+msgstr ""
+
+msgid ""
+"An optional identifier after # indicates a particular branch, tag, or\n"
+"changeset to use from the remote repository. See also :hg:`help\n"
+"revisions`."
+msgstr ""
+
+msgid ""
+"Some features, such as pushing to http:// and https:// URLs are only\n"
+"possible if the feature is explicitly enabled on the remote Mercurial\n"
+"server."
+msgstr ""
+
+msgid ""
+"Note that the security of HTTPS URLs depends on proper configuration of\n"
+"web.cacerts."
+msgstr ""
+
+msgid "Some notes about using SSH with Mercurial:"
+msgstr ""
+
+msgid ""
+"- SSH requires an accessible shell account on the destination machine\n"
+" and a copy of hg in the remote path or specified with as remotecmd.\n"
+"- path is relative to the remote user's home directory by default. Use\n"
+" an extra slash at the start of a path to specify an absolute path::"
+msgstr ""
+
+msgid " ssh://example.com//tmp/repository"
+msgstr ""
+
+msgid ""
+"- Mercurial doesn't use its own compression via SSH; the right thing\n"
+" to do is to configure it in your ~/.ssh/config, e.g.::"
+msgstr ""
+
+msgid ""
+" Host *.mylocalnetwork.example.com\n"
+" Compression no\n"
+" Host *\n"
+" Compression yes"
+msgstr ""
+
+msgid ""
+" Alternatively specify \"ssh -C\" as your ssh command in your\n"
+" configuration file or with the --ssh command line option."
+msgstr ""
+
+msgid ""
+"These URLs can all be stored in your configuration file with path\n"
+"aliases under the [paths] section like so::"
+msgstr ""
+
+msgid ""
+" [paths]\n"
+" alias1 = URL1\n"
+" alias2 = URL2\n"
+" ..."
+msgstr ""
+
+msgid ""
+"You can then use the alias for any command that uses a URL (for\n"
+"example :hg:`pull alias1` will be treated as :hg:`pull URL1`)."
+msgstr ""
+
+msgid ""
+"Two path aliases are special because they are used as defaults when\n"
+"you do not provide the URL to a command:"
+msgstr ""
+
+msgid ""
+"default:\n"
+" When you create a repository with hg clone, the clone command saves\n"
+" the location of the source repository as the new repository's\n"
+" 'default' path. This is then used when you omit path from push- and\n"
+" pull-like commands (including incoming and outgoing)."
+msgstr ""
+
+msgid ""
+"default-push:\n"
+" The push command will look for a path named 'default-push', and\n"
+" prefer it over 'default' if both are defined.\n"
+msgstr ""
+
+msgid "remote branch lookup not supported"
+msgstr ""
+
+msgid "dirstate branch not accessible"
+msgstr ""
+
+#, python-format
+msgid "unknown branch '%s'"
+msgstr ""
+
+msgid "can only share local repositories"
+msgstr ""
+
+msgid "destination already exists"
+msgstr ""
+
+msgid "updating working directory\n"
+msgstr ""
+
+#, python-format
+msgid "destination directory: %s\n"
+msgstr ""
+
+#, python-format
+msgid "destination '%s' already exists"
+msgstr ""
+
+#, python-format
+msgid "destination '%s' is not empty"
+msgstr ""
+
+msgid ""
+"src repository does not support revision lookup and so doesn't support clone "
+"by revision"
+msgstr ""
+
+msgid "clone from remote to remote not supported"
+msgstr ""
+
+#, python-format
+msgid "updating to branch %s\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"%d files updated, %d files merged, %d files removed, %d files unresolved\n"
+msgstr ""
+
+msgid "use 'hg resolve' to retry unresolved file merges\n"
+msgstr ""
+
+msgid ""
+"use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to "
+"abandon\n"
+msgstr ""
+
+msgid "(branch merge, don't forget to commit)\n"
+msgstr ""
+
+#, python-format
+msgid "config file %s not found!"
+msgstr ""
+
+#, python-format
+msgid "error reading %s/.hg/hgrc: %s\n"
+msgstr ""
+
+#, python-format
+msgid "error accessing repository at %s\n"
+msgstr ""
+
+msgid "SSL support is unavailable"
+msgstr ""
+
+msgid "IPv6 is not available on this system"
+msgstr ""
+
+#, python-format
+msgid "cannot start server at '%s:%d': %s"
+msgstr ""
+
+#, python-format
+msgid "calling hook %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s hook is invalid (\"%s\" not in a module)"
+msgstr ""
+
+msgid "exception from first failed import attempt:\n"
+msgstr ""
+
+msgid "exception from second failed import attempt:\n"
+msgstr ""
+
+#, python-format
+msgid "%s hook is invalid (import of \"%s\" failed)"
+msgstr ""
+
+#, python-format
+msgid "%s hook is invalid (\"%s\" is not defined)"
+msgstr ""
+
+#, python-format
+msgid "%s hook is invalid (\"%s\" is not callable)"
+msgstr ""
+
+#, python-format
+msgid "error: %s hook failed: %s\n"
+msgstr ""
+
+#, python-format
+msgid "error: %s hook raised an exception: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s hook failed"
+msgstr ""
+
+#, python-format
+msgid "warning: %s hook failed\n"
+msgstr ""
+
+#, python-format
+msgid "running hook %s: %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s hook %s"
+msgstr ""
+
+#, python-format
+msgid "warning: %s hook %s\n"
+msgstr ""
+
+msgid "kb"
+msgstr ""
+
+#, python-format
+msgid "ignoring invalid [auth] key '%s'\n"
+msgstr ""
+
+msgid "connection ended unexpectedly"
+msgstr ""
+
+#, python-format
+msgid "unsupported URL component: \"%s\""
+msgstr ""
+
+msgid "operation not supported over http"
+msgstr ""
+
+msgid "authorization failed"
+msgstr ""
+
+msgid "http error, possibly caused by proxy setting"
+msgstr ""
+
+#, python-format
+msgid "real URL is %s\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"'%s' does not appear to be an hg repository:\n"
+"---%%<--- (%s)\n"
+"%s\n"
+"---%%<---\n"
+msgstr ""
+
+#, python-format
+msgid "'%s' sent a broken Content-Type header (%s)"
+msgstr ""
+
+#, python-format
+msgid "'%s' uses newer protocol %s"
+msgstr ""
+
+#, python-format
+msgid "push failed: %s"
+msgstr ""
+
+msgid "Python support for SSL and HTTPS is not installed"
+msgstr ""
+
+msgid "cannot create new http repository"
+msgstr ""
+
+#, python-format
+msgid "ignoring invalid syntax '%s'"
+msgstr ""
+
+#, python-format
+msgid "skipping unreadable ignore file '%s': %s\n"
+msgstr ""
+
+#, python-format
+msgid "repository %s not found"
+msgstr "репозиторий %s не найден"
+
+#, python-format
+msgid "repository %s already exists"
+msgstr ""
+
+#, python-format
+msgid "requirement '%s' not supported"
+msgstr ""
+
+#, python-format
+msgid ".hg/sharedpath points to nonexistent directory %s"
+msgstr ""
+
+#, python-format
+msgid "warning: ignoring unknown working parent %s!\n"
+msgstr ""
+
+#, python-format
+msgid "%r cannot be used in a tag name"
+msgstr ""
+
+#, python-format
+msgid "warning: tag %s conflicts with existing branch name\n"
+msgstr ""
+
+msgid "working copy of .hgtags is changed (please commit .hgtags manually)"
+msgstr ""
+
+#, python-format
+msgid "working directory has unknown parent '%s'!"
+msgstr ""
+
+#, python-format
+msgid "unknown revision '%s'"
+msgstr ""
+
+msgid "abandoned transaction found - run hg recover"
+msgstr ""
+
+msgid "rolling back interrupted transaction\n"
+msgstr ""
+
+msgid "no interrupted transaction available\n"
+msgstr ""
+
+#, python-format
+msgid "repository tip rolled back to revision %s (undo %s: %s)\n"
+msgstr ""
+
+#, python-format
+msgid "repository tip rolled back to revision %s (undo %s)\n"
+msgstr ""
+
+msgid "rolling back unknown transaction\n"
+msgstr ""
+
+#, python-format
+msgid "named branch could not be reset, current branch is still: %s\n"
+msgstr ""
+
+#, python-format
+msgid "working directory now based on revisions %d and %d\n"
+msgstr ""
+
+#, python-format
+msgid "working directory now based on revision %d\n"
+msgstr ""
+
+msgid "no rollback information available\n"
+msgstr ""
+
+#, python-format
+msgid "waiting for lock on %s held by %r\n"
+msgstr ""
+
+#, python-format
+msgid "repository %s"
+msgstr ""
+
+#, python-format
+msgid "working directory of %s"
+msgstr ""
+
+#, python-format
+msgid "warning: can't find ancestor for '%s' copied from '%s'!\n"
+msgstr ""
+
+msgid "cannot partially commit a merge (do not specify files or patterns)"
+msgstr ""
+
+msgid "can't commit subrepos without .hgsub"
+msgstr ""
+
+#, python-format
+msgid "uncommitted changes in subrepo %s"
+msgstr ""
+
+msgid "file not found!"
+msgstr ""
+
+msgid "no match under directory!"
+msgstr ""
+
+msgid "file not tracked!"
+msgstr ""
+
+msgid "unresolved merge conflicts (see hg help resolve)"
+msgstr ""
+
+#, python-format
+msgid "committing subrepository %s\n"
+msgstr ""
+
+#, python-format
+msgid "note: commit message saved in %s\n"
+msgstr ""
+
+#, python-format
+msgid "trouble committing %s!\n"
+msgstr ""
+
+msgid "requesting all changes\n"
+msgstr ""
+
+msgid ""
+"partial pull cannot be done because other repository doesn't support "
+"changegroupsubset."
+msgstr ""
+
+#, python-format
+msgid "%d changesets found\n"
+msgstr ""
+
+msgid "bundling"
+msgstr ""
+
+msgid "manifests"
+msgstr ""
+
+#, python-format
+msgid "empty or missing revlog for %s"
+msgstr ""
+
+msgid "adding changesets\n"
+msgstr ""
+
+msgid "chunks"
+msgstr ""
+
+msgid "received changelog group is empty"
+msgstr ""
+
+msgid "adding manifests\n"
+msgstr ""
+
+msgid "adding file changes\n"
+msgstr ""
+
+msgid "received file revlog group is empty"
+msgstr ""
+
+#, python-format
+msgid "missing file data for %s:%s - run hg verify"
+msgstr ""
+
+#, python-format
+msgid " (%+d heads)"
+msgstr ""
+
+#, python-format
+msgid "added %d changesets with %d changes to %d files%s\n"
+msgstr ""
+
+msgid "Unexpected response from remote server:"
+msgstr ""
+
+msgid "operation forbidden by server"
+msgstr ""
+
+msgid "locking the remote repository failed"
+msgstr ""
+
+msgid "the server sent an unknown error code"
+msgstr ""
+
+msgid "streaming all changes\n"
+msgstr ""
+
+#, python-format
+msgid "%d files to transfer, %s of data\n"
+msgstr ""
+
+#, python-format
+msgid "transferred %s in %.1f seconds (%s/sec)\n"
+msgstr ""
+
+msgid "can't use TLS: Python SSL support not installed"
+msgstr ""
+
+msgid "(using smtps)\n"
+msgstr ""
+
+msgid "smtp.host not configured - cannot send mail"
+msgstr ""
+
+#, python-format
+msgid "sending mail: smtp host %s, port %s\n"
+msgstr ""
+
+msgid "(using starttls)\n"
+msgstr ""
+
+#, python-format
+msgid "(authenticating to mail server as %s)\n"
+msgstr ""
+
+#, python-format
+msgid "sending mail: %s\n"
+msgstr ""
+
+msgid "smtp specified as email transport, but no smtp host configured"
+msgstr ""
+
+#, python-format
+msgid "%r specified as email transport, but not in PATH"
+msgstr ""
+
+#, python-format
+msgid "ignoring invalid sendcharset: %s\n"
+msgstr ""
+
+#, python-format
+msgid "invalid email address: %s"
+msgstr ""
+
+#, python-format
+msgid "invalid local address: %s"
+msgstr ""
+
+#, python-format
+msgid "'\\n' and '\\r' disallowed in filenames: %r"
+msgstr ""
+
+#, python-format
+msgid "failed to remove %s from manifest"
+msgstr ""
+
+#, python-format
+msgid "invalid pattern (%s): %s"
+msgstr ""
+
+msgid "invalid pattern"
+msgstr ""
+
+#, python-format
+msgid "unable to read file list (%s)"
+msgstr ""
+
+#, python-format
+msgid "diff context lines count must be an integer, not %r"
+msgstr ""
+
+#, python-format
+msgid ""
+"untracked file in working directory differs from file in requested revision: "
+"'%s'"
+msgstr ""
+
+#, python-format
+msgid "case-folding collision between %s and %s"
+msgstr ""
+
+#, python-format
+msgid ""
+" conflicting flags for %s\n"
+"(n)one, e(x)ec or sym(l)ink?"
+msgstr ""
+
+msgid "&None"
+msgstr ""
+
+msgid "E&xec"
+msgstr ""
+
+msgid "Sym&link"
+msgstr ""
+
+msgid "resolving manifests\n"
+msgstr ""
+
+#, python-format
+msgid ""
+" local changed %s which remote deleted\n"
+"use (c)hanged version or (d)elete?"
+msgstr ""
+
+msgid "&Changed"
+msgstr ""
+
+msgid "&Delete"
+msgstr ""
+
+#, python-format
+msgid ""
+"remote changed %s which local deleted\n"
+"use (c)hanged version or leave (d)eleted?"
+msgstr ""
+
+msgid "&Deleted"
+msgstr ""
+
+msgid "updating"
+msgstr ""
+
+#, python-format
+msgid "update failed to remove %s: %s!\n"
+msgstr ""
+
+#, python-format
+msgid "getting %s\n"
+msgstr ""
+
+#, python-format
+msgid "getting %s to %s\n"
+msgstr ""
+
+#, python-format
+msgid "note: possible conflict - %s was renamed multiple times to:\n"
+msgstr ""
+
+msgid "merging with a working directory ancestor has no effect"
+msgstr ""
+
+msgid "nothing to merge (use 'hg update' or check 'hg heads')"
+msgstr ""
+
+msgid "outstanding uncommitted changes (use 'hg status' to list changes)"
+msgstr ""
+
+#, python-format
+msgid "outstanding uncommitted changes in subrepository '%s'"
+msgstr ""
+
+msgid "crosses branches (merge branches or use --clean to discard changes)"
+msgstr ""
+
+msgid "crosses branches (merge branches or use --check to force update)"
+msgstr ""
+
+msgid "Attention:"
+msgstr ""
+
+msgid "Caution:"
+msgstr ""
+
+msgid "!Danger!"
+msgstr ""
+
+msgid "Error:"
+msgstr ""
+
+msgid "Hint:"
+msgstr ""
+
+msgid "Important:"
+msgstr ""
+
+msgid "Note:"
+msgstr "Примечание:"
+
+msgid "Tip:"
+msgstr ""
+
+msgid "Warning!"
+msgstr ""
+
+#, python-format
+msgid "%d out of %d hunks FAILED -- saving rejects to file %s\n"
+msgstr ""
+
+#, python-format
+msgid "cannot create %s: destination already exists"
+msgstr ""
+
+#, python-format
+msgid "cannot create %s: unable to create destination directory"
+msgstr ""
+
+#, python-format
+msgid "unable to find '%s' for patching\n"
+msgstr ""
+
+#, python-format
+msgid "patching file %s\n"
+msgstr "применяется патч к файлу %s\n"
+
+#, python-format
+msgid "bad hunk #%d %s (%d %d %d %d)"
+msgstr "плохая полоса #%d %s (%d %d %d %d)"
+
+#, python-format
+msgid "file %s already exists\n"
+msgstr "файл %s уже существует\n"
+
+#, python-format
+msgid "Hunk #%d succeeded at %d with fuzz %d (offset %d lines).\n"
+msgstr ""
+"Полоса #%d была успешной для %d с погрешностью %d (смещение %d строк).\n"
+
+#, python-format
+msgid "Hunk #%d succeeded at %d (offset %d lines).\n"
+msgstr "Полоса #%d была успешной для %d (смещение %d строк).\n"
+
+#, python-format
+msgid "Hunk #%d FAILED at %d\n"
+msgstr "Полоса #%d НЕУДАЧНА для %d\n"
+
+#, python-format
+msgid "bad hunk #%d"
+msgstr "плохая полоса #%d"
+
+#, python-format
+msgid "bad hunk #%d old text line %d"
+msgstr "плохая полоса #%d старая строка текста %d"
+
+msgid "could not extract binary patch"
+msgstr "невозможно извлечь двоичную заплатку"
+
+#, python-format
+msgid "binary patch is %d bytes, not %d"
+msgstr "двоичный патч иммеет размер %d байтов, а не %d"
+
+#, python-format
+msgid "unable to strip away %d of %d dirs from %s"
+msgstr ""
+
+msgid "undefined source and destination files"
+msgstr ""
+
+#, python-format
+msgid "unsupported parser state: %s"
+msgstr ""
+
+#, python-format
+msgid "patch command failed: %s"
+msgstr ""
+
+#, python-format
+msgid "unsupported line endings type: %s"
+msgstr ""
+
+msgid "patch failed to apply"
+msgstr ""
+
+#, python-format
+msgid " %d files changed, %d insertions(+), %d deletions(-)\n"
+msgstr ""
+
+#, python-format
+msgid "exited with status %d"
+msgstr ""
+
+#, python-format
+msgid "killed by signal %d"
+msgstr ""
+
+#, python-format
+msgid "saved backup bundle to %s\n"
+msgstr ""
+
+msgid "adding branch\n"
+msgstr ""
+
+#, python-format
+msgid "strip failed, full bundle stored in '%s'\n"
+msgstr ""
+
+#, python-format
+msgid "strip failed, partial bundle stored in '%s'\n"
+msgstr ""
+
+#, python-format
+msgid "cannot %s; remote repository does not support the %r capability"
+msgstr ""
+
+#, python-format
+msgid "unknown compression type %r"
+msgstr ""
+
+msgid "index entry flags need RevlogNG"
+msgstr ""
+
+#, python-format
+msgid "index %s unknown flags %#04x for format v0"
+msgstr ""
+
+#, python-format
+msgid "index %s unknown flags %#04x for revlogng"
+msgstr ""
+
+#, python-format
+msgid "index %s unknown format %d"
+msgstr ""
+
+#, python-format
+msgid "index %s is corrupted"
+msgstr ""
+
+msgid "no node"
+msgstr ""
+
+msgid "ambiguous identifier"
+msgstr ""
+
+msgid "no match found"
+msgstr ""
+
+#, python-format
+msgid "incompatible revision flag %x"
+msgstr ""
+
+#, python-format
+msgid "%s not found in the transaction"
+msgstr ""
+
+msgid "consistency error in delta"
+msgstr ""
+
+msgid "unknown delta base"
+msgstr ""
+
+msgid "unterminated string"
+msgstr ""
+
+msgid "syntax error"
+msgstr ""
+
+msgid "missing argument"
+msgstr ""
+
+#, python-format
+msgid "can't use %s here"
+msgstr ""
+
+msgid "can't use a list in this context"
+msgstr ""
+
+#, python-format
+msgid "not a function: %s"
+msgstr ""
+
+msgid ""
+"``adds(pattern)``\n"
+" Changesets that add a file matching pattern."
+msgstr ""
+
+#. i18n: "adds" is a keyword
+msgid "adds requires a pattern"
+msgstr ""
+
+msgid ""
+"``ancestor(single, single)``\n"
+" Greatest common ancestor of the two changesets."
+msgstr ""
+
+#. i18n: "ancestor" is a keyword
+msgid "ancestor requires two arguments"
+msgstr ""
+
+#. i18n: "ancestor" is a keyword
+msgid "ancestor arguments must be single revisions"
+msgstr ""
+
+msgid ""
+"``ancestors(set)``\n"
+" Changesets that are ancestors of a changeset in set."
+msgstr ""
+
+msgid "~ expects a number"
+msgstr ""
+
+msgid ""
+"``author(string)``\n"
+" Alias for ``user(string)``."
+msgstr ""
+
+#. i18n: "author" is a keyword
+msgid "author requires a string"
+msgstr ""
+
+msgid ""
+"``bisected(string)``\n"
+" Changesets marked in the specified bisect state (good, bad, skip)."
+msgstr ""
+
+msgid "bisect requires a string"
+msgstr ""
+
+msgid "invalid bisect state"
+msgstr ""
+
+msgid ""
+"``bookmark([name])``\n"
+" The named bookmark or all bookmarks."
+msgstr ""
+
+#. i18n: "bookmark" is a keyword
+msgid "bookmark takes one or no arguments"
+msgstr ""
+
+#. i18n: "bookmark" is a keyword
+msgid "the argument to bookmark must be a string"
+msgstr ""
+
+msgid ""
+"``branch(string or set)``\n"
+" All changesets belonging to the given branch or the branches of the "
+"given\n"
+" changesets."
+msgstr ""
+
+msgid ""
+"``children(set)``\n"
+" Child changesets of changesets in set."
+msgstr ""
+
+msgid ""
+"``closed()``\n"
+" Changeset is closed."
+msgstr ""
+
+#. i18n: "closed" is a keyword
+msgid "closed takes no arguments"
+msgstr ""
+
+msgid ""
+"``contains(pattern)``\n"
+" Revision contains a file matching pattern. See :hg:`help patterns`\n"
+" for information about file patterns."
+msgstr ""
+
+#. i18n: "contains" is a keyword
+msgid "contains requires a pattern"
+msgstr ""
+
+msgid ""
+"``date(interval)``\n"
+" Changesets within the interval, see :hg:`help dates`."
+msgstr ""
+
+#. i18n: "date" is a keyword
+msgid "date requires a string"
+msgstr ""
+
+msgid ""
+"``descendants(set)``\n"
+" Changesets which are descendants of changesets in set."
+msgstr ""
+
+msgid ""
+"``filelog(pattern)``\n"
+" Changesets connected to the specified filelog."
+msgstr ""
+
+msgid "filelog requires a pattern"
+msgstr ""
+
+msgid ""
+"``follow([file])``\n"
+" An alias for ``::.`` (ancestors of the working copy's first parent).\n"
+" If a filename is specified, the history of the given file is followed,\n"
+" including copies."
+msgstr ""
+
+#. i18n: "follow" is a keyword
+msgid "follow takes no arguments or a filename"
+msgstr ""
+
+#. i18n: "follow" is a keyword
+msgid "follow takes no arguments"
+msgstr ""
+
+msgid ""
+"``all()``\n"
+" All changesets, the same as ``0:tip``."
+msgstr ""
+
+#. i18n: "all" is a keyword
+msgid "all takes no arguments"
+msgstr ""
+
+msgid ""
+"``grep(regex)``\n"
+" Like ``keyword(string)`` but accepts a regex. Use ``grep(r'...')``\n"
+" to ensure special escape characters are handled correctly. Unlike\n"
+" ``keyword(string)``, the match is case-sensitive."
+msgstr ""
+
+#. i18n: "grep" is a keyword
+msgid "grep requires a string"
+msgstr ""
+
+#, python-format
+msgid "invalid match pattern: %s"
+msgstr ""
+
+msgid ""
+"``file(pattern)``\n"
+" Changesets affecting files matched by pattern."
+msgstr ""
+
+#. i18n: "file" is a keyword
+msgid "file requires a pattern"
+msgstr ""
+
+msgid ""
+"``head()``\n"
+" Changeset is a named branch head."
+msgstr ""
+
+#. i18n: "head" is a keyword
+msgid "head takes no arguments"
+msgstr ""
+
+msgid ""
+"``heads(set)``\n"
+" Members of set with no children in set."
+msgstr ""
+
+msgid ""
+"``keyword(string)``\n"
+" Search commit message, user name, and names of changed files for\n"
+" string. The match is case-insensitive."
+msgstr ""
+
+#. i18n: "keyword" is a keyword
+msgid "keyword requires a string"
+msgstr ""
+
+msgid ""
+"``limit(set, n)``\n"
+" First n members of set."
+msgstr ""
+
+#. i18n: "limit" is a keyword
+msgid "limit requires two arguments"
+msgstr ""
+
+#. i18n: "limit" is a keyword
+msgid "limit requires a number"
+msgstr ""
+
+#. i18n: "limit" is a keyword
+msgid "limit expects a number"
+msgstr ""
+
+msgid ""
+"``last(set, n)``\n"
+" Last n members of set."
+msgstr ""
+
+#. i18n: "last" is a keyword
+msgid "last requires two arguments"
+msgstr ""
+
+#. i18n: "last" is a keyword
+msgid "last requires a number"
+msgstr ""
+
+#. i18n: "last" is a keyword
+msgid "last expects a number"
+msgstr ""
+
+msgid ""
+"``max(set)``\n"
+" Changeset with highest revision number in set."
+msgstr ""
+
+msgid ""
+"``merge()``\n"
+" Changeset is a merge changeset."
+msgstr ""
+
+#. i18n: "merge" is a keyword
+msgid "merge takes no arguments"
+msgstr ""
+
+msgid ""
+"``min(set)``\n"
+" Changeset with lowest revision number in set."
+msgstr ""
+
+msgid ""
+"``modifies(pattern)``\n"
+" Changesets modifying files matched by pattern."
+msgstr ""
+
+#. i18n: "modifies" is a keyword
+msgid "modifies requires a pattern"
+msgstr ""
+
+msgid ""
+"``id(string)``\n"
+" Revision non-ambiguously specified by the given hex string prefix."
+msgstr ""
+
+#. i18n: "id" is a keyword
+msgid "id requires one argument"
+msgstr ""
+
+#. i18n: "id" is a keyword
+msgid "id requires a string"
+msgstr ""
+
+msgid ""
+"``outgoing([path])``\n"
+" Changesets not found in the specified destination repository, or the\n"
+" default push location."
+msgstr ""
+
+#. i18n: "outgoing" is a keyword
+msgid "outgoing requires a repository path"
+msgstr ""
+
+msgid ""
+"``p1([set])``\n"
+" First parent of changesets in set, or the working directory."
+msgstr ""
+
+msgid ""
+"``p2([set])``\n"
+" Second parent of changesets in set, or the working directory."
+msgstr ""
+
+msgid ""
+"``parents([set])``\n"
+" The set of all parents for all changesets in set, or the working "
+"directory."
+msgstr ""
+
+msgid "^ expects a number 0, 1, or 2"
+msgstr ""
+
+msgid ""
+"``present(set)``\n"
+" An empty set, if any revision in set isn't found; otherwise,\n"
+" all revisions in set."
+msgstr ""
+
+msgid ""
+"``removes(pattern)``\n"
+" Changesets which remove files matching pattern."
+msgstr ""
+
+#. i18n: "removes" is a keyword
+msgid "removes requires a pattern"
+msgstr ""
+
+msgid ""
+"``rev(number)``\n"
+" Revision with the given numeric identifier."
+msgstr ""
+
+#. i18n: "rev" is a keyword
+msgid "rev requires one argument"
+msgstr ""
+
+#. i18n: "rev" is a keyword
+msgid "rev requires a number"
+msgstr ""
+
+#. i18n: "rev" is a keyword
+msgid "rev expects a number"
+msgstr ""
+
+msgid ""
+"``reverse(set)``\n"
+" Reverse order of set."
+msgstr ""
+
+msgid ""
+"``roots(set)``\n"
+" Changesets with no parent changeset in set."
+msgstr ""
+
+msgid ""
+"``sort(set[, [-]key...])``\n"
+" Sort set by keys. The default sort order is ascending, specify a key\n"
+" as ``-key`` to sort in descending order."
+msgstr ""
+
+msgid " The keys can be:"
+msgstr ""
+
+msgid ""
+" - ``rev`` for the revision number,\n"
+" - ``branch`` for the branch name,\n"
+" - ``desc`` for the commit message (description),\n"
+" - ``user`` for user name (``author`` can be used as an alias),\n"
+" - ``date`` for the commit date"
+msgstr ""
+
+#. i18n: "sort" is a keyword
+msgid "sort requires one or two arguments"
+msgstr ""
+
+msgid "sort spec must be a string"
+msgstr ""
+
+#, python-format
+msgid "unknown sort key %r"
+msgstr ""
+
+msgid ""
+"``tag([name])``\n"
+" The specified tag by name, or all tagged revisions if no name is given."
+msgstr ""
+
+#. i18n: "tag" is a keyword
+msgid "tag takes one or no arguments"
+msgstr ""
+
+#. i18n: "tag" is a keyword
+msgid "the argument to tag must be a string"
+msgstr ""
+
+msgid ""
+"``user(string)``\n"
+" User name contains string. The match is case-insensitive."
+msgstr ""
+
+msgid "can't negate that"
+msgstr ""
+
+msgid "not a symbol"
+msgstr ""
+
+msgid "empty query"
+msgstr ""
+
+#, python-format
+msgid "ui.portablefilenames value is invalid ('%s')"
+msgstr ""
+
+#, python-format
+msgid "possible case-folding collision for %s"
+msgstr ""
+
+#, python-format
+msgid "path ends in directory separator: %s"
+msgstr ""
+
+#, python-format
+msgid "path contains illegal component: %s"
+msgstr ""
+
+#, python-format
+msgid "path %r is inside nested repo %r"
+msgstr ""
+
+#, python-format
+msgid "path %r traverses symbolic link %r"
+msgstr ""
+
+#, python-format
+msgid "could not symlink to %r: %s"
+msgstr ""
+
+#, python-format
+msgid "recording removal of %s as rename to %s (%d%% similar)\n"
+msgstr ""
+
+#, python-format
+msgid "%s has not been committed yet, so no copy data will be stored for %s.\n"
+msgstr ""
+
+msgid "searching for changes\n"
+msgstr ""
+
+msgid "queries"
+msgstr ""
+
+msgid "searching"
+msgstr ""
+
+msgid "repository is unrelated"
+msgstr ""
+
+msgid "warning: repository is unrelated\n"
+msgstr ""
+
+msgid "searching for exact renames"
+msgstr ""
+
+msgid "searching for similar files"
+msgstr ""
+
+#, python-format
+msgid "%s looks like a binary file."
+msgstr ""
+
+msgid "can only specify two labels."
+msgstr ""
+
+msgid "warning: conflicts during merge.\n"
+msgstr ""
+
+#, python-format
+msgid "couldn't parse location %s"
+msgstr ""
+
+msgid "password in URL not supported"
+msgstr ""
+
+msgid "could not create remote repo"
+msgstr ""
+
+msgid "no suitable response from remote hg"
+msgstr ""
+
+msgid "remote: "
+msgstr ""
+
+msgid "unexpected response:"
+msgstr ""
+
+#, python-format
+msgid "push refused: %s"
+msgstr ""
+
+msgid "certificate checking requires Python 2.6"
+msgstr ""
+
+msgid "no certificate received"
+msgstr ""
+
+#, python-format
+msgid "certificate is for %s"
+msgstr ""
+
+msgid "IDN in certificate not supported"
+msgstr ""
+
+msgid "no commonName or subjectAltName found in certificate"
+msgstr ""
+
+#, python-format
+msgid "could not find web.cacerts: %s"
+msgstr ""
+
+#, python-format
+msgid "%s certificate error: %s (use --insecure to connect insecurely)"
+msgstr ""
+
+#, python-format
+msgid "invalid certificate for %s with fingerprint %s"
+msgstr ""
+
+#, python-format
+msgid ""
+"warning: %s certificate with fingerprint %s not verified (check "
+"hostfingerprints or web.cacerts config setting)\n"
+msgstr ""
+
+#, python-format
+msgid "no certificate for %s with configured hostfingerprint"
+msgstr ""
+
+#, python-format
+msgid ""
+"warning: %s certificate not verified (check web.cacerts config setting)\n"
+msgstr ""
+
+#, python-format
+msgid "'%s' does not appear to be an hg repository"
+msgstr ""
+
+msgid "cannot lock static-http repository"
+msgstr ""
+
+msgid "cannot create new static-http repository"
+msgstr ""
+
+#, python-format
+msgid "invalid entry in fncache, line %s"
+msgstr ""
+
+#, python-format
+msgid "warning: subrepo spec file %s not found\n"
+msgstr ""
+
+#, python-format
+msgid "subrepo spec file %s not found"
+msgstr ""
+
+msgid "missing ] in subrepo source"
+msgstr ""
+
+#, python-format
+msgid "bad subrepository pattern in %s: %s"
+msgstr ""
+
+#, python-format
+msgid ""
+" subrepository sources for %s differ\n"
+"use (l)ocal source (%s) or (r)emote source (%s)?"
+msgstr ""
+
+msgid "&Remote"
+msgstr ""
+
+#, python-format
+msgid ""
+" local changed subrepository %s which remote removed\n"
+"use (c)hanged version or (d)elete?"
+msgstr ""
+
+#, python-format
+msgid ""
+" remote changed subrepository %s which local removed\n"
+"use (c)hanged version or (d)elete?"
+msgstr ""
+
+#, python-format
+msgid ""
+" subrepository sources for %s differ\n"
+"use (l)ocal source (%s) or (r)emote source (%s)?\n"
+msgstr ""
+
+#, python-format
+msgid ""
+" subrepository sources for %s differ (in checked out version)\n"
+"use (l)ocal source (%s) or (r)emote source (%s)?\n"
+msgstr ""
+
+#, python-format
+msgid "default path for subrepository %s not found"
+msgstr ""
+
+#, python-format
+msgid "unknown subrepo type %s"
+msgstr ""
+
+#, python-format
+msgid "archiving (%s)"
+msgstr ""
+
+#, python-format
+msgid "warning: error \"%s\" in subrepository \"%s\"\n"
+msgstr ""
+
+#, python-format
+msgid "removing subrepo %s\n"
+msgstr ""
+
+#, python-format
+msgid "cloning subrepo %s from %s\n"
+msgstr ""
+
+#, python-format
+msgid "pulling subrepo %s from %s\n"
+msgstr ""
+
+#, python-format
+msgid "pushing subrepo %s to %s\n"
+msgstr ""
+
+msgid "cannot retrieve svn tool version"
+msgstr ""
+
+msgid "cannot commit svn externals"
+msgstr ""
+
+#, python-format
+msgid "not removing repo %s because it has changes.\n"
+msgstr ""
+
+#, python-format
+msgid "revision %s does not exist in subrepo %s\n"
+msgstr ""
+
+#, python-format
+msgid "checking out detached HEAD in subrepo %s\n"
+msgstr ""
+
+msgid "check out a git branch if you intend to make changes\n"
+msgstr ""
+
+#, python-format
+msgid "subrepo %s is missing"
+msgstr ""
+
+#, python-format
+msgid "unrelated git branch checked out in subrepo %s\n"
+msgstr ""
+
+#, python-format
+msgid "pushing branch %s of subrepo %s\n"
+msgstr ""
+
+#, python-format
+msgid ""
+"no branch checked out in subrepo %s\n"
+"cannot push revision %s"
+msgstr ""
+
+#, python-format
+msgid "%s, line %s: %s\n"
+msgstr ""
+
+msgid "cannot parse entry"
+msgstr ""
+
+#, python-format
+msgid "node '%s' is not well formed"
+msgstr ""
+
+msgid ".hg/cache/tags is corrupt, rebuilding it\n"
+msgstr ""
+
+#, python-format
+msgid "unknown method '%s'"
+msgstr ""
+
+msgid "expected a symbol"
+msgstr ""
+
+#, python-format
+msgid "unknown function '%s'"
+msgstr ""
+
+msgid "expected template specifier"
+msgstr ""
+
+#, python-format
+msgid "filter %s expects one argument"
+msgstr ""
+
+msgid "unmatched quotes"
+msgstr ""
+
+#, python-format
+msgid "style not found: %s"
+msgstr ""
+
+#, python-format
+msgid "\"%s\" not in template map"
+msgstr ""
+
+#, python-format
+msgid "template file %s: %s"
+msgstr ""
+
+msgid "cannot use transaction when it is already committed/aborted"
+msgstr ""
+
+#, python-format
+msgid "failed to truncate %s\n"
+msgstr ""
+
+msgid "transaction abort!\n"
+msgstr ""
+
+msgid "rollback completed\n"
+msgstr ""
+
+msgid "rollback failed - please run hg recover\n"
+msgstr ""
+
+msgid "already have changeset "
+msgstr ""
+
+#, python-format
+msgid "Not trusting file %s from untrusted user %s, group %s\n"
+msgstr ""
+
+#, python-format
+msgid "Ignored: %s\n"
+msgstr ""
+
+#, python-format
+msgid "(deprecated '%%' in path %s=%s from %s)\n"
+msgstr ""
+
+#, python-format
+msgid "ignoring untrusted configuration option %s.%s = %s\n"
+msgstr ""
+
+#, python-format
+msgid "%s.%s is not a boolean ('%s')"
+msgstr ""
+
+#, python-format
+msgid "%s.%s is not an integer ('%s')"
+msgstr ""
+
+msgid "enter a commit username:"
+msgstr ""
+
+#, python-format
+msgid "No username found, using '%s' instead\n"
+msgstr ""
+
+msgid "no username supplied (see \"hg help config\")"
+msgstr ""
+
+#, python-format
+msgid "username %s contains a newline\n"
+msgstr ""
+
+msgid "response expected"
+msgstr "ожидается ответ"
+
+msgid "unrecognized response\n"
+msgstr "не распознанный ответ\n"
+
+msgid "password: "
+msgstr "пароль: "
+
+msgid "edit failed"
+msgstr "неудача при редактировании"
+
+msgid "http authorization required"
+msgstr ""
+
+msgid "http authorization required\n"
+msgstr ""
+
+#, python-format
+msgid "realm: %s\n"
+msgstr ""
+
+#, python-format
+msgid "user: %s\n"
+msgstr ""
+
+msgid "user:"
+msgstr "пользователь:"
+
+#, python-format
+msgid "http auth: user %s, password %s\n"
+msgstr ""
+
+#, python-format
+msgid "command '%s' failed: %s"
+msgstr ""
+
+#, python-format
+msgid "filename contains '%s', which is reserved on Windows"
+msgstr ""
+
+#, python-format
+msgid "filename contains %r, which is invalid on Windows"
+msgstr ""
+
+#, python-format
+msgid "filename ends with '%s', which is not allowed on Windows"
+msgstr ""
+
+msgid "check your clock"
+msgstr ""
+
+#, python-format
+msgid "negative timestamp: %d"
+msgstr ""
+
+#, python-format
+msgid "invalid date: %r"
+msgstr ""
+
+#, python-format
+msgid "date exceeds 32 bits: %d"
+msgstr ""
+
+#, python-format
+msgid "negative date value: %d"
+msgstr ""
+
+#, python-format
+msgid "impossible time zone offset: %d"
+msgstr ""
+
+msgid "dates cannot consist entirely of whitespace"
+msgstr ""
+
+msgid "invalid day spec, use '<DATE'"
+msgstr ""
+
+msgid "invalid day spec, use '>DATE'"
+msgstr ""
+
+#, python-format
+msgid "invalid day spec: %s"
+msgstr ""
+
+#, python-format
+msgid "%s must be nonnegative (see 'hg help dates')"
+msgstr ""
+
+#, python-format
+msgid "%.0f GB"
+msgstr ""
+
+#, python-format
+msgid "%.1f GB"
+msgstr ""
+
+#, python-format
+msgid "%.2f GB"
+msgstr ""
+
+#, python-format
+msgid "%.0f MB"
+msgstr ""
+
+#, python-format
+msgid "%.1f MB"
+msgstr ""
+
+#, python-format
+msgid "%.2f MB"
+msgstr ""
+
+#, python-format
+msgid "%.0f KB"
+msgstr ""
+
+#, python-format
+msgid "%.1f KB"
+msgstr ""
+
+#, python-format
+msgid "%.2f KB"
+msgstr ""
+
+#, python-format
+msgid "%.0f bytes"
+msgstr ""
+
+#, python-format
+msgid "no port number associated with service '%s'"
+msgstr ""
+
+msgid "file:// URLs can only refer to localhost"
+msgstr ""
+
+msgid "cannot verify bundle or remote repos"
+msgstr ""
+
+msgid "interrupted"
+msgstr ""
+
+#, python-format
+msgid "empty or missing %s"
+msgstr ""
+
+#, python-format
+msgid "data length off by %d bytes"
+msgstr ""
+
+#, python-format
+msgid "index contains %d extra bytes"
+msgstr ""
+
+#, python-format
+msgid "warning: `%s' uses revlog format 1"
+msgstr ""
+
+#, python-format
+msgid "warning: `%s' uses revlog format 0"
+msgstr ""
+
+#, python-format
+msgid "rev %d points to nonexistent changeset %d"
+msgstr ""
+
+#, python-format
+msgid "rev %d points to unexpected changeset %d"
+msgstr ""
+
+#, python-format
+msgid " (expected %s)"
+msgstr ""
+
+#, python-format
+msgid "unknown parent 1 %s of %s"
+msgstr ""
+
+#, python-format
+msgid "unknown parent 2 %s of %s"
+msgstr ""
+
+#, python-format
+msgid "checking parents of %s"
+msgstr ""
+
+#, python-format
+msgid "duplicate revision %d (%d)"
+msgstr ""
+
+msgid "abandoned transaction found - run hg recover\n"
+msgstr ""
+
+#, python-format
+msgid "repository uses revlog format %d\n"
+msgstr ""
+
+msgid "checking changesets\n"
+msgstr ""
+
+msgid "checking"
+msgstr ""
+
+#, python-format
+msgid "unpacking changeset %s"
+msgstr ""
+
+msgid "checking manifests\n"
+msgstr ""
+
+#, python-format
+msgid "%s not in changesets"
+msgstr ""
+
+msgid "file without name in manifest"
+msgstr ""
+
+#, python-format
+msgid "reading manifest delta %s"
+msgstr ""
+
+msgid "crosschecking files in changesets and manifests\n"
+msgstr ""
+
+msgid "crosschecking"
+msgstr ""
+
+#, python-format
+msgid "changeset refers to unknown manifest %s"
+msgstr ""
+
+msgid "in changeset but not in manifest"
+msgstr ""
+
+msgid "in manifest but not in changeset"
+msgstr ""
+
+msgid "checking files\n"
+msgstr ""
+
+#, python-format
+msgid "cannot decode filename '%s'"
+msgstr ""
+
+#, python-format
+msgid "broken revlog! (%s)"
+msgstr ""
+
+msgid "missing revlog!"
+msgstr ""
+
+#, python-format
+msgid "%s not in manifests"
+msgstr ""
+
+#, python-format
+msgid "unpacked size is %s, %s expected"
+msgstr ""
+
+#, python-format
+msgid "unpacking %s"
+msgstr ""
+
+#, python-format
+msgid "warning: copy source of '%s' not in parents of %s"
+msgstr ""
+
+#, python-format
+msgid "empty or missing copy source revlog %s:%s"
+msgstr ""
+
+#, python-format
+msgid "warning: %s@%s: copy source revision is nullid %s:%s\n"
+msgstr ""
+
+#, python-format
+msgid "checking rename of %s"
+msgstr ""
+
+#, python-format
+msgid "%s in manifests not found"
+msgstr ""
+
+#, python-format
+msgid "warning: orphan revlog '%s'"
+msgstr ""
+
+#, python-format
+msgid "%d files, %d changesets, %d total revisions\n"
+msgstr ""
+
+#, python-format
+msgid "%d warnings encountered!\n"
+msgstr ""
+
+#, python-format
+msgid "%d integrity errors encountered!\n"
+msgstr ""
+
+#, python-format
+msgid "(first damaged changeset appears to be %d)\n"
+msgstr ""
+
+msgid "look up remote revision"
+msgstr ""
+
+msgid "push failed (unexpected response):"
+msgstr ""
+
+msgid "look up remote changes"
+msgstr ""
+
+msgid "push failed:"
+msgstr ""