rust-cpython: remove PySharedRefCell and its companion structs
authorYuya Nishihara <yuya@tcha.org>
Sat, 25 Jan 2020 17:30:24 +0900
changeset 44297 6b7aef44274b
parent 44296 bad4e7b361d2
child 44298 e1ecfc7c84be
rust-cpython: remove PySharedRefCell and its companion structs Also updates py_shared_iterator!() documentation accordingly.
rust/hg-cpython/src/ref_sharing.rs
--- a/rust/hg-cpython/src/ref_sharing.rs	Sat Jan 25 17:26:23 2020 +0900
+++ b/rust/hg-cpython/src/ref_sharing.rs	Sat Jan 25 17:30:24 2020 +0900
@@ -22,416 +22,6 @@
 
 //! Macros for use in the `hg-cpython` bridge library.
 
-use cpython::{exc, PyClone, PyErr, PyObject, PyResult, Python};
-use std::cell::{BorrowMutError, Ref, RefCell, RefMut};
-use std::ops::{Deref, DerefMut};
-use std::result;
-use std::sync::atomic::{AtomicUsize, Ordering};
-
-/// Manages the shared state between Python and Rust
-///
-/// `PySharedState` is owned by `PySharedRefCell`, and is shared across its
-/// derived references. The consistency of these references are guaranteed
-/// as follows:
-///
-/// - The immutability of `py_class!` object fields. Any mutation of
-///   `PySharedRefCell` is allowed only through its `borrow_mut()`.
-/// - The `py: Python<'_>` token, which makes sure that any data access is
-///   synchronized by the GIL.
-/// - The underlying `RefCell`, which prevents `PySharedRefCell` data from
-///   being directly borrowed or leaked while it is mutably borrowed.
-/// - The `borrow_count`, which is the number of references borrowed from
-///   `PyLeaked`. Just like `RefCell`, mutation is prohibited while `PyLeaked`
-///   is borrowed.
-/// - The `generation` counter, which increments on `borrow_mut()`. `PyLeaked`
-///   reference is valid only if the `current_generation()` equals to the
-///   `generation` at the time of `leak_immutable()`.
-#[derive(Debug, Default)]
-struct PySharedState {
-    // The counter variable could be Cell<usize> since any operation on
-    // PySharedState is synchronized by the GIL, but being "atomic" makes
-    // PySharedState inherently Sync. The ordering requirement doesn't
-    // matter thanks to the GIL.
-    borrow_count: AtomicUsize,
-    generation: AtomicUsize,
-}
-
-impl PySharedState {
-    fn current_borrow_count(&self, _py: Python) -> usize {
-        self.borrow_count.load(Ordering::Relaxed)
-    }
-
-    fn increase_borrow_count(&self, _py: Python) {
-        // Note that this wraps around if there are more than usize::MAX
-        // borrowed references, which shouldn't happen due to memory limit.
-        self.borrow_count.fetch_add(1, Ordering::Relaxed);
-    }
-
-    fn decrease_borrow_count(&self, _py: Python) {
-        let prev_count = self.borrow_count.fetch_sub(1, Ordering::Relaxed);
-        assert!(prev_count > 0);
-    }
-
-    fn current_generation(&self, _py: Python) -> usize {
-        self.generation.load(Ordering::Relaxed)
-    }
-
-    fn increment_generation(&self, py: Python) {
-        assert_eq!(self.current_borrow_count(py), 0);
-        // Note that this wraps around to the same value if mutably
-        // borrowed more than usize::MAX times, which wouldn't happen
-        // in practice.
-        self.generation.fetch_add(1, Ordering::Relaxed);
-    }
-}
-
-/// Helper to keep the borrow count updated while the shared object is
-/// immutably borrowed without using the `RefCell` interface.
-struct BorrowPyShared<'a> {
-    py: Python<'a>,
-    py_shared_state: &'a PySharedState,
-}
-
-impl<'a> BorrowPyShared<'a> {
-    fn new(
-        py: Python<'a>,
-        py_shared_state: &'a PySharedState,
-    ) -> BorrowPyShared<'a> {
-        py_shared_state.increase_borrow_count(py);
-        BorrowPyShared {
-            py,
-            py_shared_state,
-        }
-    }
-}
-
-impl Drop for BorrowPyShared<'_> {
-    fn drop(&mut self) {
-        self.py_shared_state.decrease_borrow_count(self.py);
-    }
-}
-
-/// `RefCell` wrapper to be safely used in conjunction with `PySharedState`.
-///
-/// This object can be stored in a `py_class!` object as a data field. Any
-/// operation is allowed through the `PySharedRef` interface.
-#[derive(Debug)]
-pub struct PySharedRefCell<T> {
-    inner: RefCell<T>,
-    py_shared_state: PySharedState,
-}
-
-impl<T> PySharedRefCell<T> {
-    pub fn new(value: T) -> PySharedRefCell<T> {
-        Self {
-            inner: RefCell::new(value),
-            py_shared_state: PySharedState::default(),
-        }
-    }
-
-    fn borrow<'a>(&'a self, _py: Python<'a>) -> Ref<'a, T> {
-        // py_shared_state isn't involved since
-        // - inner.borrow() would fail if self is mutably borrowed,
-        // - and inner.try_borrow_mut() would fail while self is borrowed.
-        self.inner.borrow()
-    }
-
-    fn try_borrow_mut<'a>(
-        &'a self,
-        py: Python<'a>,
-    ) -> result::Result<RefMut<'a, T>, BorrowMutError> {
-        if self.py_shared_state.current_borrow_count(py) > 0 {
-            // propagate borrow-by-leaked state to inner to get BorrowMutError
-            let _dummy = self.inner.borrow();
-            self.inner.try_borrow_mut()?;
-            unreachable!("BorrowMutError must be returned");
-        }
-        let inner_ref = self.inner.try_borrow_mut()?;
-        self.py_shared_state.increment_generation(py);
-        Ok(inner_ref)
-    }
-}
-
-/// Sharable data member of type `T` borrowed from the `PyObject`.
-pub struct PySharedRef<'a, T> {
-    py: Python<'a>,
-    owner: &'a PyObject,
-    data: &'a PySharedRefCell<T>,
-}
-
-impl<'a, T> PySharedRef<'a, T> {
-    /// # Safety
-    ///
-    /// The `data` must be owned by the `owner`. Otherwise, the leak count
-    /// would get wrong.
-    pub unsafe fn new(
-        py: Python<'a>,
-        owner: &'a PyObject,
-        data: &'a PySharedRefCell<T>,
-    ) -> Self {
-        Self { py, owner, data }
-    }
-
-    pub fn borrow(&self) -> Ref<'a, T> {
-        self.data.borrow(self.py)
-    }
-
-    /// Mutably borrows the wrapped value.
-    ///
-    /// # Panics
-    ///
-    /// Panics if the value is currently borrowed through `PySharedRef`
-    /// or `PyLeaked`.
-    pub fn borrow_mut(&self) -> RefMut<'a, T> {
-        self.try_borrow_mut().expect("already borrowed")
-    }
-
-    /// Mutably borrows the wrapped value, returning an error if the value
-    /// is currently borrowed.
-    pub fn try_borrow_mut(
-        &self,
-    ) -> result::Result<RefMut<'a, T>, BorrowMutError> {
-        self.data.try_borrow_mut(self.py)
-    }
-
-    /// Returns a leaked reference.
-    ///
-    /// # Panics
-    ///
-    /// Panics if this is mutably borrowed.
-    pub fn leak_immutable(&self) -> PyLeaked<&'static T> {
-        let state = &self.data.py_shared_state;
-        // make sure self.data isn't mutably borrowed; otherwise the
-        // generation number can't be trusted.
-        let data_ref = self.borrow();
-
-        // &'static cast is safe because data_ptr and state_ptr are owned
-        // by self.owner, and we do have the GIL for thread safety.
-        let data_ptr: *const T = &*data_ref;
-        let state_ptr: *const PySharedState = state;
-        PyLeaked::<&'static T> {
-            inner: self.owner.clone_ref(self.py),
-            data: unsafe { &*data_ptr },
-            py_shared_state: unsafe { &*state_ptr },
-            generation: state.current_generation(self.py),
-        }
-    }
-}
-
-/// Allows a `py_class!` generated struct to share references to one of its
-/// data members with Python.
-///
-/// # Parameters
-///
-/// * `$name` is the same identifier used in for `py_class!` macro call.
-/// * `$inner_struct` is the identifier of the underlying Rust struct
-/// * `$data_member` is the identifier of the data member of `$inner_struct`
-/// that will be shared.
-/// * `$shared_accessor` is the function name to be generated, which allows
-/// safe access to the data member.
-///
-/// # Safety
-///
-/// `$data_member` must persist while the `$name` object is alive. In other
-/// words, it must be an accessor to a data field of the Python object.
-///
-/// # Example
-///
-/// ```
-/// struct MyStruct {
-///     inner: Vec<u32>;
-/// }
-///
-/// py_class!(pub class MyType |py| {
-///     data inner: PySharedRefCell<MyStruct>;
-/// });
-///
-/// py_shared_ref!(MyType, MyStruct, inner, inner_shared);
-/// ```
-macro_rules! py_shared_ref {
-    (
-        $name: ident,
-        $inner_struct: ident,
-        $data_member: ident,
-        $shared_accessor: ident
-    ) => {
-        impl $name {
-            /// Returns a safe reference to the shared `$data_member`.
-            ///
-            /// This function guarantees that `PySharedRef` is created with
-            /// the valid `self` and `self.$data_member(py)` pair.
-            fn $shared_accessor<'a>(
-                &'a self,
-                py: Python<'a>,
-            ) -> $crate::ref_sharing::PySharedRef<'a, $inner_struct> {
-                use cpython::PythonObject;
-                use $crate::ref_sharing::PySharedRef;
-                let owner = self.as_object();
-                let data = self.$data_member(py);
-                unsafe { PySharedRef::new(py, owner, data) }
-            }
-        }
-    };
-}
-
-/// Manage immutable references to `PyObject` leaked into Python iterators.
-///
-/// This reference will be invalidated once the original value is mutably
-/// borrowed.
-pub struct PyLeaked<T> {
-    inner: PyObject,
-    data: T,
-    py_shared_state: &'static PySharedState,
-    /// Generation counter of data `T` captured when PyLeaked is created.
-    generation: usize,
-}
-
-// DO NOT implement Deref for PyLeaked<T>! Dereferencing PyLeaked
-// without taking Python GIL wouldn't be safe. Also, the underling reference
-// is invalid if generation != py_shared_state.generation.
-
-impl<T> PyLeaked<T> {
-    /// Immutably borrows the wrapped value.
-    ///
-    /// Borrowing fails if the underlying reference has been invalidated.
-    ///
-    /// # Safety
-    ///
-    /// The lifetime of the innermost object is cheated. Do not obtain and
-    /// copy it out of the borrow scope. See the example of `try_borrow_mut()`
-    /// for details.
-    pub unsafe fn try_borrow<'a>(
-        &'a self,
-        py: Python<'a>,
-    ) -> PyResult<PyLeakedRef<'a, T>> {
-        self.validate_generation(py)?;
-        Ok(PyLeakedRef {
-            _borrow: BorrowPyShared::new(py, self.py_shared_state),
-            data: &self.data,
-        })
-    }
-
-    /// Mutably borrows the wrapped value.
-    ///
-    /// Borrowing fails if the underlying reference has been invalidated.
-    ///
-    /// Typically `T` is an iterator. If `T` is an immutable reference,
-    /// `get_mut()` is useless since the inner value can't be mutated.
-    ///
-    /// # Safety
-    ///
-    /// The lifetime of the innermost object is cheated. Do not obtain and
-    /// copy it out of the borrow scope. For example, the following code
-    /// is unsafe:
-    ///
-    /// ```compile_fail
-    /// let slice;
-    /// {
-    ///     let iter = leaked.try_borrow_mut(py);
-    ///     // slice can outlive since the iterator is of Iter<'static, T>
-    ///     // type, but it shouldn't.
-    ///     slice = iter.as_slice();
-    /// }
-    /// println!("{:?}", slice);
-    /// ```
-    pub unsafe fn try_borrow_mut<'a>(
-        &'a mut self,
-        py: Python<'a>,
-    ) -> PyResult<PyLeakedRefMut<'a, T>> {
-        self.validate_generation(py)?;
-        Ok(PyLeakedRefMut {
-            _borrow: BorrowPyShared::new(py, self.py_shared_state),
-            data: &mut self.data,
-        })
-    }
-
-    /// Converts the inner value by the given function.
-    ///
-    /// Typically `T` is a static reference to a container, and `U` is an
-    /// iterator of that container.
-    ///
-    /// # Panics
-    ///
-    /// Panics if the underlying reference has been invalidated.
-    ///
-    /// This is typically called immediately after the `PyLeaked` is obtained.
-    /// In which case, the reference must be valid and no panic would occur.
-    ///
-    /// # Safety
-    ///
-    /// The lifetime of the object passed in to the function `f` is cheated.
-    /// It's typically a static reference, but is valid only while the
-    /// corresponding `PyLeaked` is alive. Do not copy it out of the
-    /// function call.
-    pub unsafe fn map<U>(
-        self,
-        py: Python,
-        f: impl FnOnce(T) -> U,
-    ) -> PyLeaked<U> {
-        // Needs to test the generation value to make sure self.data reference
-        // is still intact.
-        self.validate_generation(py)
-            .expect("map() over invalidated leaked reference");
-
-        // f() could make the self.data outlive. That's why map() is unsafe.
-        // In order to make this function safe, maybe we'll need a way to
-        // temporarily restrict the lifetime of self.data and translate the
-        // returned object back to Something<'static>.
-        let new_data = f(self.data);
-        PyLeaked {
-            inner: self.inner,
-            data: new_data,
-            py_shared_state: self.py_shared_state,
-            generation: self.generation,
-        }
-    }
-
-    fn validate_generation(&self, py: Python) -> PyResult<()> {
-        if self.py_shared_state.current_generation(py) == self.generation {
-            Ok(())
-        } else {
-            Err(PyErr::new::<exc::RuntimeError, _>(
-                py,
-                "Cannot access to leaked reference after mutation",
-            ))
-        }
-    }
-}
-
-/// Immutably borrowed reference to a leaked value.
-pub struct PyLeakedRef<'a, T> {
-    _borrow: BorrowPyShared<'a>,
-    data: &'a T,
-}
-
-impl<T> Deref for PyLeakedRef<'_, T> {
-    type Target = T;
-
-    fn deref(&self) -> &T {
-        self.data
-    }
-}
-
-/// Mutably borrowed reference to a leaked value.
-pub struct PyLeakedRefMut<'a, T> {
-    _borrow: BorrowPyShared<'a>,
-    data: &'a mut T,
-}
-
-impl<T> Deref for PyLeakedRefMut<'_, T> {
-    type Target = T;
-
-    fn deref(&self) -> &T {
-        self.data
-    }
-}
-
-impl<T> DerefMut for PyLeakedRefMut<'_, T> {
-    fn deref_mut(&mut self) -> &mut T {
-        self.data
-    }
-}
-
 /// Defines a `py_class!` that acts as a Python iterator over a Rust iterator.
 ///
 /// TODO: this is a bit awkward to use, and a better (more complicated)
@@ -440,7 +30,8 @@
 /// # Parameters
 ///
 /// * `$name` is the identifier to give to the resulting Rust struct.
-/// * `$leaked` corresponds to `$leaked` in the matching `py_shared_ref!` call.
+/// * `$leaked` corresponds to `UnsafePyLeaked` in the matching `@shared data`
+/// declaration.
 /// * `$iterator_type` is the type of the Rust iterator.
 /// * `$success_func` is a function for processing the Rust `(key, value)`
 /// tuple on iteration success, turning it into something Python understands.
@@ -459,7 +50,7 @@
 /// }
 ///
 /// py_class!(pub class MyType |py| {
-///     data inner: PySharedRefCell<MyStruct>;
+///     @shared data inner: MyStruct;
 ///
 ///     def __iter__(&self) -> PyResult<MyTypeItemsIterator> {
 ///         let leaked_ref = self.inner_shared(py).leak_immutable();
@@ -483,11 +74,9 @@
 ///     }
 /// }
 ///
-/// py_shared_ref!(MyType, MyStruct, inner, MyTypeLeakedRef);
-///
 /// py_shared_iterator!(
 ///     MyTypeItemsIterator,
-///     PyLeaked<HashMap<'static, Vec<u8>, Vec<u8>>>,
+///     UnsafePyLeaked<HashMap<'static, Vec<u8>, Vec<u8>>>,
 ///     MyType::translate_key_value,
 ///     Option<(PyBytes, PyBytes)>
 /// );
@@ -530,135 +119,3 @@
         }
     };
 }
-
-#[cfg(test)]
-#[cfg(any(feature = "python27-bin", feature = "python3-bin"))]
-mod test {
-    use super::*;
-    use cpython::{GILGuard, Python};
-
-    py_class!(class Owner |py| {
-        data string: PySharedRefCell<String>;
-    });
-    py_shared_ref!(Owner, String, string, string_shared);
-
-    fn prepare_env() -> (GILGuard, Owner) {
-        let gil = Python::acquire_gil();
-        let py = gil.python();
-        let owner =
-            Owner::create_instance(py, PySharedRefCell::new("new".to_owned()))
-                .unwrap();
-        (gil, owner)
-    }
-
-    #[test]
-    fn test_leaked_borrow() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let leaked = owner.string_shared(py).leak_immutable();
-        let leaked_ref = unsafe { leaked.try_borrow(py) }.unwrap();
-        assert_eq!(*leaked_ref, "new");
-    }
-
-    #[test]
-    fn test_leaked_borrow_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let leaked = owner.string_shared(py).leak_immutable();
-        let mut leaked_iter = unsafe { leaked.map(py, |s| s.chars()) };
-        let mut leaked_ref =
-            unsafe { leaked_iter.try_borrow_mut(py) }.unwrap();
-        assert_eq!(leaked_ref.next(), Some('n'));
-        assert_eq!(leaked_ref.next(), Some('e'));
-        assert_eq!(leaked_ref.next(), Some('w'));
-        assert_eq!(leaked_ref.next(), None);
-    }
-
-    #[test]
-    fn test_leaked_borrow_after_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let leaked = owner.string_shared(py).leak_immutable();
-        owner.string_shared(py).borrow_mut().clear();
-        assert!(unsafe { leaked.try_borrow(py) }.is_err());
-    }
-
-    #[test]
-    fn test_leaked_borrow_mut_after_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let leaked = owner.string_shared(py).leak_immutable();
-        let mut leaked_iter = unsafe { leaked.map(py, |s| s.chars()) };
-        owner.string_shared(py).borrow_mut().clear();
-        assert!(unsafe { leaked_iter.try_borrow_mut(py) }.is_err());
-    }
-
-    #[test]
-    #[should_panic(expected = "map() over invalidated leaked reference")]
-    fn test_leaked_map_after_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let leaked = owner.string_shared(py).leak_immutable();
-        owner.string_shared(py).borrow_mut().clear();
-        let _leaked_iter = unsafe { leaked.map(py, |s| s.chars()) };
-    }
-
-    #[test]
-    fn test_try_borrow_mut_while_leaked_ref() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        assert!(owner.string_shared(py).try_borrow_mut().is_ok());
-        let leaked = owner.string_shared(py).leak_immutable();
-        {
-            let _leaked_ref = unsafe { leaked.try_borrow(py) }.unwrap();
-            assert!(owner.string_shared(py).try_borrow_mut().is_err());
-            {
-                let _leaked_ref2 = unsafe { leaked.try_borrow(py) }.unwrap();
-                assert!(owner.string_shared(py).try_borrow_mut().is_err());
-            }
-            assert!(owner.string_shared(py).try_borrow_mut().is_err());
-        }
-        assert!(owner.string_shared(py).try_borrow_mut().is_ok());
-    }
-
-    #[test]
-    fn test_try_borrow_mut_while_leaked_ref_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        assert!(owner.string_shared(py).try_borrow_mut().is_ok());
-        let leaked = owner.string_shared(py).leak_immutable();
-        let mut leaked_iter = unsafe { leaked.map(py, |s| s.chars()) };
-        {
-            let _leaked_ref =
-                unsafe { leaked_iter.try_borrow_mut(py) }.unwrap();
-            assert!(owner.string_shared(py).try_borrow_mut().is_err());
-        }
-        assert!(owner.string_shared(py).try_borrow_mut().is_ok());
-    }
-
-    #[test]
-    #[should_panic(expected = "mutably borrowed")]
-    fn test_leak_while_borrow_mut() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let _mut_ref = owner.string_shared(py).borrow_mut();
-        owner.string_shared(py).leak_immutable();
-    }
-
-    #[test]
-    fn test_try_borrow_mut_while_borrow() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let _ref = owner.string_shared(py).borrow();
-        assert!(owner.string_shared(py).try_borrow_mut().is_err());
-    }
-
-    #[test]
-    #[should_panic(expected = "already borrowed")]
-    fn test_borrow_mut_while_borrow() {
-        let (gil, owner) = prepare_env();
-        let py = gil.python();
-        let _ref = owner.string_shared(py).borrow();
-        owner.string_shared(py).borrow_mut();
-    }
-}