Mercurial > hg-stable
changeset 47951:9c4204b7f3e4
tests: rely on dummyssh being the default
This commit is exactly the result of running this command:
sed -i -e 's! *\(-e \|--ssh \|--config ui.ssh=\)[ \"]*$PYTHON[ \"]*$\(RUN\|\)TESTDIR/dummyssh[\"]* *! !g' -e '/^[ >]*ssh *=[ "]*$PYTHON[ "]*$\(RUN\|\)TESTDIR\/dummyssh[ "]*$/d' -e 's/^\( [$] .*[^ ]\) *$/\1/' *.t *.sh
Sometimes the tests can be simplified further, but I think it's
preferable to do the simplification separately.
Differential Revision: https://phab.mercurial-scm.org/D11245
line wrap: on
line diff
--- a/tests/library-infinitepush.sh Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/library-infinitepush.sh Mon Aug 02 21:25:01 2021 -0400 @@ -15,7 +15,6 @@ [extensions] infinitepush= [ui] -ssh = "$PYTHON" "$TESTDIR/dummyssh" [infinitepush] branchpattern=re:scratch/.* EOF
--- a/tests/narrow-library.sh Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/narrow-library.sh Mon Aug 02 21:25:01 2021 -0400 @@ -2,7 +2,6 @@ [extensions] narrow= [ui] -ssh="$PYTHON" "$RUNTESTDIR/dummyssh" [experimental] changegroup3 = True EOF
--- a/tests/remotefilelog-library.sh Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/remotefilelog-library.sh Mon Aug 02 21:25:01 2021 -0400 @@ -8,7 +8,6 @@ rebase= strip= [ui] -ssh="$PYTHON" "$TESTDIR/dummyssh" [server] preferuncompressed=True [experimental]
--- a/tests/test-bookmarks-corner-case.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bookmarks-corner-case.t Mon Aug 02 21:25:01 2021 -0400 @@ -17,7 +17,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [server] > concurrent-push-mode=check-related > EOF
--- a/tests/test-bookmarks-pushpull.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bookmarks-pushpull.t Mon Aug 02 21:25:01 2021 -0400 @@ -1143,7 +1143,6 @@ > ssh=ssh://user@dummy/issue4455-dest > http=http://localhost:$HGPORT/ > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > EOF $ cat >> ../issue4455-dest/.hg/hgrc << EOF > [hooks] @@ -1270,7 +1269,6 @@ $ cat << EOF >> $HGRCPATH > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > [server] > bookmarks-pushkey-compat = yes > EOF
--- a/tests/test-bundle2-exchange.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bundle2-exchange.t Mon Aug 02 21:25:01 2021 -0400 @@ -29,7 +29,6 @@ > evolution.exchange=True > bundle2-output-capture=True > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > [command-templates] > log={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline} > [web] @@ -924,7 +923,6 @@ $ cp $TESTTMP/hgrc.orig $HGRCPATH $ cat >> $HGRCPATH <<EOF > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > EOF $ cat >> $TESTTMP/locktester.py <<EOF
--- a/tests/test-bundle2-format.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bundle2-format.t Mon Aug 02 21:25:01 2021 -0400 @@ -234,7 +234,6 @@ > [experimental] > evolution.createmarkers=True > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > [command-templates] > log={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline} > [web]
--- a/tests/test-bundle2-pushback.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bundle2-pushback.t Mon Aug 02 21:25:01 2021 -0400 @@ -37,7 +37,6 @@ $ cat >> $HGRCPATH <<EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > username = nobody <no.reply@example.com> > > [alias]
--- a/tests/test-bundle2-remote-changegroup.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-bundle2-remote-changegroup.t Mon Aug 02 21:25:01 2021 -0400 @@ -95,7 +95,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > [command-templates] > log={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline} > EOF
--- a/tests/test-clone.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-clone.t Mon Aug 02 21:25:01 2021 -0400 @@ -1125,7 +1125,7 @@ $ hg id -R remote -r 0 abort: repository remote not found [255] - $ hg --config share.pool=share -q clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" a ssh://user@dummy/remote + $ hg --config share.pool=share -q clone a ssh://user@dummy/remote $ hg -R remote id -r 0 acb14030fe0a
--- a/tests/test-clonebundles.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-clonebundles.t Mon Aug 02 21:25:01 2021 -0400 @@ -208,7 +208,7 @@ Feature works over SSH - $ hg clone -U -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/server ssh-full-clone + $ hg clone -U ssh://user@dummy/server ssh-full-clone applying clone bundle from http://localhost:$HGPORT1/full.hg adding changesets adding manifests
--- a/tests/test-debugcommands.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-debugcommands.t Mon Aug 02 21:25:01 2021 -0400 @@ -644,12 +644,12 @@ Test debugpeer - $ hg --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" debugpeer ssh://user@dummy/debugrevlog + $ hg debugpeer ssh://user@dummy/debugrevlog url: ssh://user@dummy/debugrevlog local: no pushable: yes - $ hg --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" --debug debugpeer ssh://user@dummy/debugrevlog + $ hg --debug debugpeer ssh://user@dummy/debugrevlog running "*" "*/tests/dummyssh" 'user@dummy' 'hg -R debugrevlog serve --stdio' (glob) (no-windows !) running "*" "*\tests/dummyssh" "user@dummy" "hg -R debugrevlog serve --stdio" (glob) (windows !) devel-peer-request: hello+between
--- a/tests/test-fastannotate-protocol.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-fastannotate-protocol.t Mon Aug 02 21:25:01 2021 -0400 @@ -1,6 +1,5 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [extensions] > fastannotate= > [fastannotate]
--- a/tests/test-infinitepush-ci.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-infinitepush-ci.t Mon Aug 02 21:25:01 2021 -0400 @@ -10,7 +10,6 @@ $ . "$TESTDIR/library-infinitepush.sh" $ cat >> $HGRCPATH <<EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [alias] > glog = log -GT "{rev}:{node|short} {desc}\n{phase}" > EOF
--- a/tests/test-init.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-init.t Mon Aug 02 21:25:01 2021 -0400 @@ -123,7 +123,7 @@ init+push to remote2 - $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2 + $ hg init ssh://user@dummy/remote2 $ hg incoming -R remote2 local comparing with local changeset: 0:08b9e9f63b32 @@ -133,7 +133,7 @@ summary: init - $ hg push -R local -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2 + $ hg push -R local ssh://user@dummy/remote2 pushing to ssh://user@dummy/remote2 searching for changes remote: adding changesets @@ -143,7 +143,7 @@ clone to remote1 - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1 + $ hg clone local ssh://user@dummy/remote1 searching for changes remote: adding changesets remote: adding manifests @@ -151,7 +151,7 @@ remote: added 1 changesets with 1 changes to 1 files The largefiles extension doesn't crash - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles= + $ hg clone local ssh://user@dummy/remotelf --config extensions.largefiles= The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !) The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !) searching for changes @@ -162,14 +162,14 @@ init to existing repo - $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1 + $ hg init ssh://user@dummy/remote1 abort: repository remote1 already exists abort: could not create remote repo [255] clone to existing repo - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1 + $ hg clone local ssh://user@dummy/remote1 abort: repository remote1 already exists abort: could not create remote repo [255] @@ -283,7 +283,7 @@ $ hg -R local bookmark test $ hg -R local bookmarks * test 0:08b9e9f63b32 - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks + $ hg clone local ssh://user@dummy/remote-bookmarks searching for changes remote: adding changesets remote: adding manifests
--- a/tests/test-largefiles-wireproto.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-largefiles-wireproto.t Mon Aug 02 21:25:01 2021 -0400 @@ -124,7 +124,7 @@ #endif vanilla clients locked out from largefiles ssh repos - $ hg --config extensions.largefiles=! clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5 + $ hg --config extensions.largefiles=! clone ssh://user@dummy/r4 r5 remote: remote: This repository uses the largefiles extension. remote:
--- a/tests/test-log.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-log.t Mon Aug 02 21:25:01 2021 -0400 @@ -2516,10 +2516,10 @@ is global. So we shouldn't expect the namespace always exists. Using ssh:// makes sure a bundle repository is created from scratch. (issue6301) - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" \ + $ hg clone \ > -qr0 "ssh://user@dummy/`pwd`/a" a-clone $ hg incoming --config extensions.names=names.py -R a-clone \ - > -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" -T '{bars}\n' -l1 + > -T '{bars}\n' -l1 comparing with ssh://user@dummy/$TESTTMP/a searching for changes
--- a/tests/test-logexchange.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-logexchange.t Mon Aug 02 21:25:01 2021 -0400 @@ -3,7 +3,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [alias] > glog = log -G -T '{rev}:{node|short} {desc}' > [extensions]
--- a/tests/test-missing-capability.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-missing-capability.t Mon Aug 02 21:25:01 2021 -0400 @@ -26,7 +26,6 @@ > EOF $ cat >> .hg/hgrc <<EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > EOF $ hg pull ssh://user@dummy/repo1 -r tip -B a
--- a/tests/test-persistent-nodemap.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-persistent-nodemap.t Mon Aug 02 21:25:01 2021 -0400 @@ -868,7 +868,7 @@ No race condition - $ hg clone -U --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/test-repo stream-clone --debug | egrep '00(changelog|manifest)' + $ hg clone -U --stream ssh://user@dummy/test-repo stream-clone --debug | egrep '00(changelog|manifest)' adding [s] 00manifest.n (62 bytes) adding [s] 00manifest-*.nd (118 KB) (glob) adding [s] 00changelog.n (62 bytes) @@ -933,7 +933,7 @@ Do a mix of clone and commit at the same time so that the file listed on disk differ at actual transfer time. - $ (hg clone -U --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/test-repo stream-clone-race-1 --debug 2>> clone-output | egrep '00(changelog|manifest)' >> clone-output; touch $HG_TEST_STREAM_WALKED_FILE_3) & + $ (hg clone -U --stream ssh://user@dummy/test-repo stream-clone-race-1 --debug 2>> clone-output | egrep '00(changelog|manifest)' >> clone-output; touch $HG_TEST_STREAM_WALKED_FILE_3) & $ $RUNTESTDIR/testlib/wait-on-file 10 $HG_TEST_STREAM_WALKED_FILE_1 $ hg -R test-repo/ commit -m foo $ touch $HG_TEST_STREAM_WALKED_FILE_2 @@ -1030,7 +1030,7 @@ Performe the mix of clone and full refresh of the nodemap, so that the files (and filenames) are different between listing time and actual transfer time. - $ (hg clone -U --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/test-repo stream-clone-race-2 --debug 2>> clone-output-2 | egrep '00(changelog|manifest)' >> clone-output-2; touch $HG_TEST_STREAM_WALKED_FILE_3) & + $ (hg clone -U --stream ssh://user@dummy/test-repo stream-clone-race-2 --debug 2>> clone-output-2 | egrep '00(changelog|manifest)' >> clone-output-2; touch $HG_TEST_STREAM_WALKED_FILE_3) & $ $RUNTESTDIR/testlib/wait-on-file 10 $HG_TEST_STREAM_WALKED_FILE_1 $ rm test-repo/.hg/store/00changelog.n $ rm test-repo/.hg/store/00changelog-*.nd
--- a/tests/test-push-race.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-push-race.t Mon Aug 02 21:25:01 2021 -0400 @@ -102,7 +102,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > # simplify output > logtemplate = {node|short} {desc} ({branch}) > [phases]
--- a/tests/test-share.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-share.t Mon Aug 02 21:25:01 2021 -0400 @@ -160,7 +160,7 @@ Cloning a shared repo via bundle2 results in a non-shared clone $ cd .. - $ hg clone -q --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/repo2 cloned-via-bundle2 + $ hg clone -q --stream ssh://user@dummy/`pwd`/repo2 cloned-via-bundle2 $ cat ./cloned-via-bundle2/.hg/requires | grep "shared" [1] $ hg id --cwd cloned-via-bundle2 -r tip
--- a/tests/test-sparse-clone.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-sparse-clone.t Mon Aug 02 21:25:01 2021 -0400 @@ -2,7 +2,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$RUNTESTDIR/dummyssh" > username = nobody <no.reply@fb.com> > [extensions] > sparse=
--- a/tests/test-ssh-batch.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-ssh-batch.t Mon Aug 02 21:25:01 2021 -0400 @@ -9,7 +9,7 @@ fails (thus causing the sshpeer to be stopped), the errors from the further lookups don't result in tracebacks. - $ hg pull -r b0 -r nosuchbookmark $(for i in $($TESTDIR/seq.py 1 20); do echo -r b$i; done) -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/$(pwd)/../a + $ hg pull -r b0 -r nosuchbookmark $(for i in $($TESTDIR/seq.py 1 20); do echo -r b$i; done) ssh://user@dummy/$(pwd)/../a pulling from ssh://user@dummy/$TESTTMP/b/../a abort: unknown revision 'nosuchbookmark' [255]
--- a/tests/test-ssh-bundle1.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-ssh-bundle1.t Mon Aug 02 21:25:01 2021 -0400 @@ -52,7 +52,7 @@ repo not found error - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local + $ hg clone ssh://user@dummy/nonexistent local remote: abort: repository nonexistent not found abort: no suitable response from remote hg [255] @@ -60,7 +60,7 @@ non-existent absolute path #if no-msys - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy//`pwd`/nonexistent local + $ hg clone ssh://user@dummy//`pwd`/nonexistent local remote: abort: repository /$TESTTMP/nonexistent not found abort: no suitable response from remote hg [255] @@ -70,7 +70,7 @@ #if no-reposimplestore - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/remote local-stream + $ hg clone --stream ssh://user@dummy/remote local-stream streaming all changes 4 files to transfer, 602 bytes of data (no-zstd !) transferred 602 bytes in * seconds (*) (glob) (no-zstd !) @@ -94,7 +94,7 @@ clone bookmarks via stream $ hg -R local-stream book mybook - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/local-stream stream2 + $ hg clone --stream ssh://user@dummy/local-stream stream2 streaming all changes 4 files to transfer, 602 bytes of data (no-zstd !) transferred 602 bytes in * seconds (*) (glob) (no-zstd !) @@ -114,7 +114,7 @@ clone remote via pull - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local + $ hg clone ssh://user@dummy/remote local requesting all changes adding changesets adding manifests @@ -142,14 +142,14 @@ $ hg paths default = ssh://user@dummy/remote - $ hg pull -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" + $ hg pull pulling from ssh://user@dummy/remote searching for changes no changes found pull from wrong ssh URL - $ hg pull -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist + $ hg pull ssh://user@dummy/doesnotexist pulling from ssh://user@dummy/doesnotexist remote: abort: repository doesnotexist not found abort: no suitable response from remote hg @@ -181,7 +181,7 @@ find incoming on the remote side - $ hg incoming -R ../remote -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/local + $ hg incoming -R ../remote ssh://user@dummy/local comparing with ssh://user@dummy/local searching for changes changeset: 3:a28a9d1a809c @@ -194,7 +194,7 @@ find incoming on the remote side (using absolute path) - $ hg incoming -R ../remote -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`" + $ hg incoming -R ../remote "ssh://user@dummy/`pwd`" comparing with ssh://user@dummy/$TESTTMP/local searching for changes changeset: 3:a28a9d1a809c @@ -241,7 +241,7 @@ test pushkeys and bookmarks $ cd $TESTTMP/local - $ hg debugpushkey --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces + $ hg debugpushkey ssh://user@dummy/remote namespaces bookmarks namespaces phases @@ -256,7 +256,7 @@ no changes found exporting bookmark foo [1] - $ hg debugpushkey --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks + $ hg debugpushkey ssh://user@dummy/remote bookmarks foo 1160648e36cec0054048a7edc4110c6f84fde594 $ hg book -f foo $ hg push --traceback @@ -328,7 +328,7 @@ $ hg -R ../remote bookmark test $ hg -R ../remote bookmarks * test 4:6c0482d977a3 - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks + $ hg clone ssh://user@dummy/remote local-bookmarks requesting all changes adding changesets adding manifests @@ -356,21 +356,21 @@ Test remote paths with spaces (issue2983): - $ hg init --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg init "ssh://user@dummy/a repo" $ touch "$TESTTMP/a repo/test" $ hg -R 'a repo' commit -A -m "test" adding test $ hg -R 'a repo' tag tag - $ hg id --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg id "ssh://user@dummy/a repo" 73649e48688a - $ hg id --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO" + $ hg id "ssh://user@dummy/a repo#noNoNO" abort: unknown revision 'noNoNO' [255] Test (non-)escaping of remote paths with spaces when cloning (issue3145): - $ hg clone --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg clone "ssh://user@dummy/a repo" destination directory: a repo abort: destination 'a repo' is not empty [10] @@ -463,7 +463,6 @@ > [paths] > default-push = ssh://user@dummy/remote > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [extensions] > localwrite = localwrite.py > EOF @@ -583,11 +582,11 @@ $ echo "pretxnchangegroup.fail = python:$TESTTMP/failhook:hook" >> remote/.hg/hgrc - $ hg -q --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" clone ssh://user@dummy/remote hookout + $ hg -q clone ssh://user@dummy/remote hookout $ cd hookout $ touch hookfailure $ hg -q commit -A -m 'remote hook failure' - $ hg --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" push + $ hg push pushing to ssh://user@dummy/remote searching for changes remote: adding changesets @@ -607,7 +606,7 @@ > [extensions] > crash = ${TESTDIR}/crashgetbundler.py > EOF - $ hg --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" pull + $ hg pull pulling from ssh://user@dummy/remote searching for changes adding changesets
--- a/tests/test-ssh-proto.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-ssh-proto.t Mon Aug 02 21:25:01 2021 -0400 @@ -29,7 +29,6 @@ $ cat >> $HGRCPATH << EOF > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [devel] > debug.peer-request = true > [extensions]
--- a/tests/test-ssh-repoerror.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-ssh-repoerror.t Mon Aug 02 21:25:01 2021 -0400 @@ -8,7 +8,6 @@ $ cat << EOF >> $HGRCPATH > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > EOF repository itself is non-readable
--- a/tests/test-ssh.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-ssh.t Mon Aug 02 21:25:01 2021 -0400 @@ -42,18 +42,18 @@ repo not found error - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local + $ hg clone ssh://user@dummy/nonexistent local remote: abort: repository nonexistent not found abort: no suitable response from remote hg [255] - $ hg clone -q -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local + $ hg clone -q ssh://user@dummy/nonexistent local remote: abort: repository nonexistent not found abort: no suitable response from remote hg [255] non-existent absolute path - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/nonexistent local + $ hg clone ssh://user@dummy/`pwd`/nonexistent local remote: abort: repository $TESTTMP/nonexistent not found abort: no suitable response from remote hg [255] @@ -62,7 +62,7 @@ #if no-reposimplestore - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/remote local-stream + $ hg clone --stream ssh://user@dummy/remote local-stream streaming all changes 8 files to transfer, 827 bytes of data (no-zstd !) transferred 827 bytes in * seconds (*) (glob) (no-zstd !) @@ -84,7 +84,7 @@ clone bookmarks via stream $ hg -R local-stream book mybook - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/local-stream stream2 + $ hg clone --stream ssh://user@dummy/local-stream stream2 streaming all changes 15 files to transfer, * of data (glob) transferred * in * seconds (*) (glob) @@ -100,7 +100,7 @@ clone remote via pull - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local + $ hg clone ssh://user@dummy/remote local requesting all changes adding changesets adding manifests @@ -128,14 +128,14 @@ $ hg paths default = ssh://user@dummy/remote - $ hg pull -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" + $ hg pull pulling from ssh://user@dummy/remote searching for changes no changes found pull from wrong ssh URL - $ hg pull -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist + $ hg pull ssh://user@dummy/doesnotexist pulling from ssh://user@dummy/doesnotexist remote: abort: repository doesnotexist not found abort: no suitable response from remote hg @@ -167,7 +167,7 @@ find incoming on the remote side - $ hg incoming -R ../remote -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/local + $ hg incoming -R ../remote ssh://user@dummy/local comparing with ssh://user@dummy/local searching for changes changeset: 3:a28a9d1a809c @@ -180,7 +180,7 @@ find incoming on the remote side (using absolute path) - $ hg incoming -R ../remote -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`" + $ hg incoming -R ../remote "ssh://user@dummy/`pwd`" comparing with ssh://user@dummy/$TESTTMP/local searching for changes changeset: 3:a28a9d1a809c @@ -227,7 +227,7 @@ test pushkeys and bookmarks $ cd $TESTTMP/local - $ hg debugpushkey --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces + $ hg debugpushkey ssh://user@dummy/remote namespaces bookmarks namespaces phases @@ -242,7 +242,7 @@ no changes found exporting bookmark foo [1] - $ hg debugpushkey --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks + $ hg debugpushkey ssh://user@dummy/remote bookmarks foo 1160648e36cec0054048a7edc4110c6f84fde594 $ hg book -f foo $ hg push --traceback @@ -347,7 +347,7 @@ $ hg -R ../remote bookmark test $ hg -R ../remote bookmarks * test 4:6c0482d977a3 - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks + $ hg clone ssh://user@dummy/remote local-bookmarks requesting all changes adding changesets adding manifests @@ -375,21 +375,21 @@ Test remote paths with spaces (issue2983): - $ hg init --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg init "ssh://user@dummy/a repo" $ touch "$TESTTMP/a repo/test" $ hg -R 'a repo' commit -A -m "test" adding test $ hg -R 'a repo' tag tag - $ hg id --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg id "ssh://user@dummy/a repo" 73649e48688a - $ hg id --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO" + $ hg id "ssh://user@dummy/a repo#noNoNO" abort: unknown revision 'noNoNO' [255] Test (non-)escaping of remote paths with spaces when cloning (issue3145): - $ hg clone --ssh "\"$PYTHON\" \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo" + $ hg clone "ssh://user@dummy/a repo" destination directory: a repo abort: destination 'a repo' is not empty [10] @@ -516,7 +516,6 @@ > [paths] > default-push = ssh://user@dummy/remote > [ui] - > ssh = "$PYTHON" "$TESTDIR/dummyssh" > [extensions] > localwrite = localwrite.py > EOF @@ -670,11 +669,11 @@ $ echo "pretxnchangegroup.fail = python:$TESTTMP/failhook:hook" >> remote/.hg/hgrc - $ hg -q --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" clone ssh://user@dummy/remote hookout + $ hg -q clone ssh://user@dummy/remote hookout $ cd hookout $ touch hookfailure $ hg -q commit -A -m 'remote hook failure' - $ hg --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" push + $ hg push pushing to ssh://user@dummy/remote searching for changes remote: adding changesets @@ -695,7 +694,7 @@ > [extensions] > crash = ${TESTDIR}/crashgetbundler.py > EOF - $ hg --config ui.ssh="\"$PYTHON\" $TESTDIR/dummyssh" pull + $ hg pull pulling from ssh://user@dummy/remote searching for changes remote: abort: this is an exercise @@ -704,14 +703,14 @@ abort with no error hint when there is a ssh problem when pulling - $ hg pull ssh://brokenrepository -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" + $ hg pull ssh://brokenrepository pulling from ssh://brokenrepository/ abort: no suitable response from remote hg [255] abort with configured error hint when there is a ssh problem when pulling - $ hg pull ssh://brokenrepository -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" \ + $ hg pull ssh://brokenrepository \ > --config ui.ssherrorhint="Please see http://company/internalwiki/ssh.html" pulling from ssh://brokenrepository/ abort: no suitable response from remote hg
--- a/tests/test-stream-bundle-v2.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-stream-bundle-v2.t Mon Aug 02 21:25:01 2021 -0400 @@ -14,7 +14,6 @@ > evolution.exchange=True > bundle2-output-capture=True > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > logtemplate={rev}:{node|short} {phase} {author} {bookmarks} {desc|firstline} > [web] > push_ssl = false
--- a/tests/test-subrepo-relative-path.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-subrepo-relative-path.t Mon Aug 02 21:25:01 2021 -0400 @@ -186,7 +186,7 @@ subrepo paths with ssh urls - $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/cloned sshclone + $ hg clone ssh://user@dummy/cloned sshclone requesting all changes adding changesets adding manifests @@ -203,7 +203,7 @@ new changesets 863c1745b441 3 files updated, 0 files merged, 0 files removed, 0 files unresolved - $ hg -R sshclone push -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/cloned + $ hg -R sshclone push ssh://user@dummy/`pwd`/cloned pushing to ssh://user@dummy/$TESTTMP/cloned pushing subrepo sub to ssh://user@dummy/$TESTTMP/sub searching for changes
--- a/tests/test-transaction-rollback-on-sigpipe.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-transaction-rollback-on-sigpipe.t Mon Aug 02 21:25:01 2021 -0400 @@ -2,7 +2,7 @@ the remote hg is able to successfully roll back the transaction. $ hg init -q remote - $ hg clone -e "\"$PYTHON\" \"$RUNTESTDIR/dummyssh\"" -q ssh://user@dummy/`pwd`/remote local + $ hg clone -q ssh://user@dummy/`pwd`/remote local $ SIGPIPE_REMOTE_DEBUG_FILE="$TESTTMP/DEBUGFILE" $ SYNCFILE1="$TESTTMP/SYNCFILE1" $ SYNCFILE2="$TESTTMP/SYNCFILE2" @@ -36,7 +36,7 @@ (use quiet to avoid flacky output from the server) - $ hg push --quiet -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --remotecmd "$remotecmd" + $ hg push --quiet --remotecmd "$remotecmd" abort: stream ended unexpectedly (got 0 bytes, expected 4) [255] $ cat $SIGPIPE_REMOTE_DEBUG_FILE
--- a/tests/test-treemanifest.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-treemanifest.t Mon Aug 02 21:25:01 2021 -0400 @@ -1,6 +1,5 @@ $ cat << EOF >> $HGRCPATH > [ui] - > ssh="$PYTHON" "$TESTDIR/dummyssh" > EOF Set up repo
--- a/tests/test-wireproto.t Mon Aug 02 21:10:42 2021 -0400 +++ b/tests/test-wireproto.t Mon Aug 02 21:25:01 2021 -0400 @@ -142,13 +142,13 @@ SSH (try to exercise the ssh functionality with a dummy script): - $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo uno due tre quattro + $ hg debugwireargs ssh://user@dummy/repo uno due tre quattro uno due tre quattro None - $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --four vier + $ hg debugwireargs ssh://user@dummy/repo eins zwei --four vier eins zwei None vier None - $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei + $ hg debugwireargs ssh://user@dummy/repo eins zwei eins zwei None None None - $ hg debugwireargs --ssh "\"$PYTHON\" $TESTDIR/dummyssh" ssh://user@dummy/repo eins zwei --five fuenf + $ hg debugwireargs ssh://user@dummy/repo eins zwei --five fuenf eins zwei None None None Explicitly kill daemons to let the test exit on Windows