annotate tests/test-largefiles-misc.t @ 41163:0101a35deae2

phabricator: warn if unable to amend, instead of aborting after posting

There was a divergence in behavior here between obsolete and strip based
amending.  I first noticed the abort when testing outside of the test harness,
but then had trouble recreating it here after reverting the code changes.  It
turns out, strip based amend was successfully amending the public commit after
it was posted!  It looks like the protection is in the `commit --amend` command,
not in the underlying code that it calls.

I considered doing a preflight check and aborting.  But the locks are only
acquired at the end, if amending, and this is too large a section of code to be
wrapped in a maybe-it's-held-or-not context manager for my tastes.
Additionally, some people do post-push reviews, and amending is the default
behavior, so they shouldn't see a misleading error message.

The lack of a 'Differential Revision' entry in the commit message breaks a
{phabreview} test, so it had to be partially conditionalized.

This file contains testcases that tend to be related to special cases or less
common commands affecting largefile.

  $ hg init requirements
  $ cd requirements

# largefiles not loaded by default.

  $ hg config extensions
  [1]

# Adding largefiles to requires file will auto-load largefiles extension.

  $ echo largefiles >> .hg/requires
  $ hg config extensions
  extensions.largefiles=

# But only if there is no config entry for the extension already.

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > largefiles=!
  > EOF

  $ hg config extensions
  abort: repository requires features unknown to this Mercurial: largefiles!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > largefiles=
  > EOF

  $ hg config extensions
  extensions.largefiles=

  $ cat > .hg/hgrc << EOF
  > [extensions]
  > largefiles = missing.py
  > EOF

  $ hg config extensions
  *** failed to import extension largefiles from missing.py: [Errno 2] $ENOENT$: 'missing.py'
  abort: repository requires features unknown to this Mercurial: largefiles!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ cd ..

Each sections should be independent of each others.

  $ USERCACHE="$TESTTMP/cache"; export USERCACHE
  $ mkdir "${USERCACHE}"
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > largefiles=
  > purge=
  > rebase=
  > transplant=
  > [phases]
  > publish=False
  > [largefiles]
  > minsize=2
  > patterns=glob:**.dat
  > usercache=${USERCACHE}
  > [hooks]
  > precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
  > EOF



Test copies and moves from a directory other than root (issue3516)
=========================================================================

  $ hg init lf_cpmv
  $ cd lf_cpmv
  $ mkdir dira
  $ mkdir dira/dirb
  $ touch dira/dirb/largefile
  $ hg add --large dira/dirb/largefile
  $ hg commit -m "added"
  Invoking status precommit hook
  A dira/dirb/largefile
  $ cd dira
  $ hg cp dirb/largefile foo/largefile

TODO: Ideally, this should mention the largefile, not the standin
  $ hg log -T '{rev}\n' --stat 'set:clean()'
  0
   .hglf/dira/dirb/largefile |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  
  $ hg ci -m "deep copy"
  Invoking status precommit hook
  A dira/foo/largefile
  $ find . | sort
  .
  ./dirb
  ./dirb/largefile
  ./foo
  ./foo/largefile
  $ hg mv foo/largefile baz/largefile
  $ hg ci -m "moved"
  Invoking status precommit hook
  A dira/baz/largefile
  R dira/foo/largefile
  $ find . | sort
  .
  ./baz
  ./baz/largefile
  ./dirb
  ./dirb/largefile
  $ cd ..
  $ hg mv dira dirc
  moving .hglf/dira/baz/largefile to .hglf/dirc/baz/largefile
  moving .hglf/dira/dirb/largefile to .hglf/dirc/dirb/largefile
  $ find * | sort
  dirc
  dirc/baz
  dirc/baz/largefile
  dirc/dirb
  dirc/dirb/largefile

  $ hg clone -q . ../fetch
  $ hg --config extensions.fetch= fetch ../fetch
  abort: uncommitted changes
  [255]
  $ hg up -qC
  $ cd ..

Clone a local repository owned by another user
===================================================

#if unix-permissions

We have to simulate that here by setting $HOME and removing write permissions
  $ ORIGHOME="$HOME"
  $ mkdir alice
  $ HOME="`pwd`/alice"
  $ cd alice
  $ hg init pubrepo
  $ cd pubrepo
  $ dd if=/dev/zero bs=1k count=11k > a-large-file 2> /dev/null
  $ hg add --large a-large-file
  $ hg commit -m "Add a large file"
  Invoking status precommit hook
  A a-large-file
  $ cd ..
  $ chmod -R a-w pubrepo
  $ cd ..
  $ mkdir bob
  $ HOME="`pwd`/bob"
  $ cd bob
  $ hg clone --pull ../alice/pubrepo pubrepo
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 09a186cfa6da (1 drafts)
  updating to branch default
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..
  $ chmod -R u+w alice/pubrepo
  $ HOME="$ORIGHOME"

#endif


Symlink to a large largefile should behave the same as a symlink to a normal file
=====================================================================================

#if symlink

  $ hg init largesymlink
  $ cd largesymlink
  $ dd if=/dev/zero bs=1k count=10k of=largefile 2>/dev/null
  $ hg add --large largefile
  $ hg commit -m "commit a large file"
  Invoking status precommit hook
  A largefile
  $ ln -s largefile largelink
  $ hg add largelink
  $ hg commit -m "commit a large symlink"
  Invoking status precommit hook
  A largelink
  $ rm -f largelink
  $ hg up >/dev/null
  $ test -f largelink
  [1]
  $ test -L largelink
  [1]
  $ rm -f largelink # make next part of the test independent of the previous
  $ hg up -C >/dev/null
  $ test -f largelink
  $ test -L largelink
  $ cd ..

#endif


test for pattern matching on 'hg status':
==============================================


to boost performance, largefiles checks whether specified patterns are
related to largefiles in working directory (NOT to STANDIN) or not.

  $ hg init statusmatch
  $ cd statusmatch

  $ mkdir -p a/b/c/d
  $ echo normal > a/b/c/d/e.normal.txt
  $ hg add a/b/c/d/e.normal.txt
  $ echo large > a/b/c/d/e.large.txt
  $ hg add --large a/b/c/d/e.large.txt
  $ mkdir -p a/b/c/x
  $ echo normal > a/b/c/x/y.normal.txt
  $ hg add a/b/c/x/y.normal.txt
  $ hg commit -m 'add files'
  Invoking status precommit hook
  A a/b/c/d/e.large.txt
  A a/b/c/d/e.normal.txt
  A a/b/c/x/y.normal.txt

(1) no pattern: no performance boost
  $ hg status -A
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt
  C a/b/c/x/y.normal.txt

(2) pattern not related to largefiles: performance boost
  $ hg status -A a/b/c/x
  C a/b/c/x/y.normal.txt

(3) pattern related to largefiles: no performance boost
  $ hg status -A a/b/c/d
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt

(4) pattern related to STANDIN (not to largefiles): performance boost
  $ hg status -A .hglf/a
  C .hglf/a/b/c/d/e.large.txt

(5) mixed case: no performance boost
  $ hg status -A a/b/c/x a/b/c/d
  C a/b/c/d/e.large.txt
  C a/b/c/d/e.normal.txt
  C a/b/c/x/y.normal.txt

verify that largefiles doesn't break filesets

  $ hg log --rev . --exclude "set:binary()"
  changeset:   0:41bd42f10efa
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add files
  
sharing a largefile repo automatically enables largefiles on the share

  $ hg share --config extensions.share= . ../shared_lfrepo
  updating working directory
  getting changed largefiles
  1 largefiles updated, 0 removed
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ grep largefiles ../shared_lfrepo/.hg/requires
  largefiles

verify that large files in subrepos handled properly
  $ hg init subrepo
  $ echo "subrepo = subrepo" > .hgsub
  $ hg add .hgsub
  $ hg ci -m "add subrepo"
  Invoking status precommit hook
  A .hgsub
  ? .hgsubstate
  $ echo "rev 1" > subrepo/large.txt
  $ hg add --large subrepo/large.txt
  $ hg sum
  parent: 1:8ee150ea2e9c tip
   add subrepo
  branch: default
  commit: 1 subrepos
  update: (current)
  phases: 2 draft
  $ hg st
  $ hg st -S
  A subrepo/large.txt
  $ hg ci -S -m "commit top repo"
  committing subrepository subrepo
  Invoking status precommit hook
  A large.txt
  Invoking status precommit hook
  M .hgsubstate
# No differences
  $ hg st -S
  $ hg sum
  parent: 2:ce4cd0c527a6 tip
   commit top repo
  branch: default
  commit: (clean)
  update: (current)
  phases: 3 draft
  $ echo "rev 2" > subrepo/large.txt
  $ hg st -S
  M subrepo/large.txt
  $ hg sum
  parent: 2:ce4cd0c527a6 tip
   commit top repo
  branch: default
  commit: 1 subrepos
  update: (current)
  phases: 3 draft
  $ hg ci -m "this commit should fail without -S"
  abort: uncommitted changes in subrepository "subrepo"
  (use --subrepos for recursive commit)
  [255]

Add a normal file to the subrepo, then test archiving

  $ echo 'normal file' > subrepo/normal.txt
  $ touch large.dat
  $ mv subrepo/large.txt subrepo/renamed-large.txt
  $ hg addremove -S --dry-run
  adding large.dat as a largefile
  removing subrepo/large.txt
  adding subrepo/normal.txt
  adding subrepo/renamed-large.txt
  $ hg status -S
  ! subrepo/large.txt
  ? large.dat
  ? subrepo/normal.txt
  ? subrepo/renamed-large.txt

  $ hg addremove --dry-run subrepo
  removing subrepo/large.txt
  adding subrepo/normal.txt
  adding subrepo/renamed-large.txt
  $ hg status -S
  ! subrepo/large.txt
  ? large.dat
  ? subrepo/normal.txt
  ? subrepo/renamed-large.txt
  $ cd ..

  $ hg -R statusmatch addremove --dry-run statusmatch/subrepo
  removing statusmatch/subrepo/large.txt
  adding statusmatch/subrepo/normal.txt
  adding statusmatch/subrepo/renamed-large.txt
  $ hg -R statusmatch status -S
  ! subrepo/large.txt
  ? large.dat
  ? subrepo/normal.txt
  ? subrepo/renamed-large.txt

  $ hg -R statusmatch addremove --dry-run -S
  adding large.dat as a largefile
  removing subrepo/large.txt
  adding subrepo/normal.txt
  adding subrepo/renamed-large.txt
  $ cd statusmatch

  $ mv subrepo/renamed-large.txt subrepo/large.txt
  $ hg addremove subrepo
  adding subrepo/normal.txt
  $ hg forget subrepo/normal.txt

  $ hg addremove -S
  adding large.dat as a largefile
  adding subrepo/normal.txt
  $ rm large.dat

  $ hg addremove subrepo
  $ hg addremove -S
  removing large.dat

Lock in subrepo, otherwise the change isn't archived

  $ hg ci -S -m "add normal file to top level"
  committing subrepository subrepo
  Invoking status precommit hook
  M large.txt
  A normal.txt
  Invoking status precommit hook
  M .hgsubstate
  $ hg archive -S ../lf_subrepo_archive
  $ find ../lf_subrepo_archive | sort
  ../lf_subrepo_archive
  ../lf_subrepo_archive/.hg_archival.txt
  ../lf_subrepo_archive/.hgsub
  ../lf_subrepo_archive/.hgsubstate
  ../lf_subrepo_archive/a
  ../lf_subrepo_archive/a/b
  ../lf_subrepo_archive/a/b/c
  ../lf_subrepo_archive/a/b/c/d
  ../lf_subrepo_archive/a/b/c/d/e.large.txt
  ../lf_subrepo_archive/a/b/c/d/e.normal.txt
  ../lf_subrepo_archive/a/b/c/x
  ../lf_subrepo_archive/a/b/c/x/y.normal.txt
  ../lf_subrepo_archive/subrepo
  ../lf_subrepo_archive/subrepo/large.txt
  ../lf_subrepo_archive/subrepo/normal.txt
  $ cat ../lf_subrepo_archive/.hg_archival.txt
  repo: 41bd42f10efa43698cc02052ea0977771cba506d
  node: d56a95e6522858bc08a724c4fe2bdee066d1c30b
  branch: default
  latesttag: null
  latesttagdistance: 4
  changessincelatesttag: 4

Test update with subrepos.

  $ hg update 0
  getting changed largefiles
  0 largefiles updated, 1 removed
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg status -S
  $ hg update tip
  getting changed largefiles
  1 largefiles updated, 0 removed
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status -S
# modify a large file
  $ echo "modified" > subrepo/large.txt
  $ hg st -S
  M subrepo/large.txt
# update -C should revert the change.
  $ hg update -C
  getting changed largefiles
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg status -S

Forget doesn't change the content of the file
  $ echo 'pre-forget content' > subrepo/large.txt
  $ hg forget -v subrepo/large.txt
  removing subrepo/large.txt
  $ cat subrepo/large.txt
  pre-forget content

Test reverting a forgotten file
  $ hg revert -R subrepo subrepo/large.txt
  $ hg status -SA subrepo/large.txt
  C subrepo/large.txt

  $ hg rm -v subrepo/large.txt
  removing subrepo/large.txt
  $ hg revert -R subrepo subrepo/large.txt
  $ rm subrepo/large.txt
  $ hg addremove -S
  removing subrepo/large.txt
  $ hg st -S
  R subrepo/large.txt

Test archiving a revision that references a subrepo that is not yet
cloned (see test-subrepo-recursion.t):

  $ hg clone -U . ../empty
  $ cd ../empty
  $ hg archive --subrepos -r tip ../archive.tar.gz
  cloning subrepo subrepo from $TESTTMP/statusmatch/subrepo
  $ cd ..






Test addremove, forget and others
==============================================

Test that addremove picks up largefiles prior to the initial commit (issue3541)

  $ hg init addrm2
  $ cd addrm2
  $ touch large.dat
  $ touch large2.dat
  $ touch normal
  $ hg add --large large.dat
  $ hg addremove -v
  adding large2.dat as a largefile
  adding normal

Test that forgetting all largefiles reverts to islfilesrepo() == False
(addremove will add *.dat as normal files now)
  $ hg forget large.dat
  $ hg forget large2.dat
  $ hg addremove -v
  adding large.dat
  adding large2.dat

Test commit's addremove option prior to the first commit
  $ hg forget large.dat
  $ hg forget large2.dat
  $ hg add --large large.dat
  $ hg ci -Am "commit"
  adding large2.dat as a largefile
  Invoking status precommit hook
  A large.dat
  A large2.dat
  A normal
  $ find .hglf | sort
  .hglf
  .hglf/large.dat
  .hglf/large2.dat

Test actions on largefiles using relative paths from subdir

  $ mkdir sub
  $ cd sub
  $ echo anotherlarge > anotherlarge
  $ hg add --large anotherlarge
  $ hg st
  A sub/anotherlarge
  $ hg st anotherlarge
  A anotherlarge
  $ hg commit -m anotherlarge anotherlarge
  Invoking status precommit hook
  A sub/anotherlarge
  $ hg log anotherlarge
  changeset:   1:9627a577c5e9
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     anotherlarge
  
  $ hg --debug log -T '{rev}: {desc}\n' ../sub/anotherlarge
  updated patterns: ../.hglf/sub/../sub/anotherlarge, ../sub/anotherlarge
  1: anotherlarge

  $ hg log -G anotherlarge
  @  changeset:   1:9627a577c5e9
  |  tag:         tip
  ~  user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     anotherlarge
  

  $ hg log glob:another*
  changeset:   1:9627a577c5e9
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     anotherlarge
  
  $ hg --debug log -T '{rev}: {desc}\n' -G glob:another*
  updated patterns: glob:../.hglf/sub/another*, glob:another*
  @  1: anotherlarge
  |
  ~

#if no-msys
  $ hg --debug log -T '{rev}: {desc}\n' 'glob:../.hglf/sub/another*' # no-msys
  updated patterns: glob:../.hglf/sub/another*
  1: anotherlarge

  $ hg --debug log -G -T '{rev}: {desc}\n' 'glob:../.hglf/sub/another*' # no-msys
  updated patterns: glob:../.hglf/sub/another*
  @  1: anotherlarge
  |
  ~
#endif

  $ echo more >> anotherlarge
  $ hg st .
  M anotherlarge
  $ hg cat anotherlarge
  anotherlarge
  $ hg revert anotherlarge
  $ hg st
  ? sub/anotherlarge.orig

Test orig files go where we want them
  $ echo moremore >> anotherlarge
  $ hg revert anotherlarge -v --config 'ui.origbackuppath=.hg/origbackups'
  creating directory: $TESTTMP/addrm2/.hg/origbackups/.hglf/sub
  saving current version of ../.hglf/sub/anotherlarge as $TESTTMP/addrm2/.hg/origbackups/.hglf/sub/anotherlarge
  reverting ../.hglf/sub/anotherlarge
  creating directory: $TESTTMP/addrm2/.hg/origbackups/sub
  found 90c622cf65cebe75c5842f9136c459333faf392e in store
  found 90c622cf65cebe75c5842f9136c459333faf392e in store
  $ ls ../.hg/origbackups/sub
  anotherlarge
  $ cd ..

Test glob logging from the root dir
  $ hg log glob:**another*
  changeset:   1:9627a577c5e9
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     anotherlarge
  
  $ hg log -G glob:**another*
  @  changeset:   1:9627a577c5e9
  |  tag:         tip
  ~  user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     anotherlarge
  

  $ cd ..

Log from outer space
  $ hg --debug log -R addrm2 -T '{rev}: {desc}\n' 'addrm2/sub/anotherlarge'
  updated patterns: addrm2/.hglf/sub/anotherlarge, addrm2/sub/anotherlarge
  1: anotherlarge
  $ hg --debug log -R addrm2 -T '{rev}: {desc}\n' 'addrm2/.hglf/sub/anotherlarge'
  updated patterns: addrm2/.hglf/sub/anotherlarge
  1: anotherlarge


Check error message while exchange
=========================================================

issue3651: summary/outgoing with largefiles shows "no remote repo"
unexpectedly

  $ mkdir issue3651
  $ cd issue3651

  $ hg init src
  $ echo a > src/a
  $ hg -R src add --large src/a
  $ hg -R src commit -m '#0'
  Invoking status precommit hook
  A a

check messages when no remote repository is specified:
"no remote repo" route for "hg outgoing --large" is not tested here,
because it can't be reproduced easily.

  $ hg init clone1
  $ hg -R clone1 -q pull src
  $ hg -R clone1 -q update
  $ hg -R clone1 paths | grep default
  [1]

  $ hg -R clone1 summary --large
  parent: 0:fc0bd45326d3 tip
   #0
  branch: default
  commit: (clean)
  update: (current)
  phases: 1 draft
  largefiles: (no remote repo)

check messages when there is no files to upload:

  $ hg -q clone src clone2
  $ hg -R clone2 paths | grep default
  default = $TESTTMP/issue3651/src

  $ hg -R clone2 summary --large
  parent: 0:fc0bd45326d3 tip
   #0
  branch: default
  commit: (clean)
  update: (current)
  phases: 1 draft
  largefiles: (no files to upload)
  $ hg -R clone2 outgoing --large
  comparing with $TESTTMP/issue3651/src
  searching for changes
  no changes found
  largefiles: no files to upload
  [1]

  $ hg -R clone2 outgoing --large --graph --template "{rev}"
  comparing with $TESTTMP/issue3651/src
  searching for changes
  no changes found
  largefiles: no files to upload

check messages when there are files to upload:

  $ echo b > clone2/b
  $ hg -R clone2 add --large clone2/b
  $ hg -R clone2 commit -m '#1'
  Invoking status precommit hook
  A b
  $ hg -R clone2 summary --large
  parent: 1:1acbe71ce432 tip
   #1
  branch: default
  commit: (clean)
  update: (current)
  phases: 2 draft
  largefiles: 1 entities for 1 files to upload
  $ hg -R clone2 outgoing --large
  comparing with $TESTTMP/issue3651/src
  searching for changes
  changeset:   1:1acbe71ce432
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     #1
  
  largefiles to upload (1 entities):
  b
  
  $ hg -R clone2 outgoing --large --graph --template "{rev}"
  comparing with $TESTTMP/issue3651/src
  searching for changes
  @  1
  
  largefiles to upload (1 entities):
  b
  

  $ cp clone2/b clone2/b1
  $ cp clone2/b clone2/b2
  $ hg -R clone2 add --large clone2/b1 clone2/b2
  $ hg -R clone2 commit -m '#2: add largefiles referring same entity'
  Invoking status precommit hook
  A b1
  A b2
  $ hg -R clone2 summary --large
  parent: 2:6095d0695d70 tip
   #2: add largefiles referring same entity
  branch: default
  commit: (clean)
  update: (current)
  phases: 3 draft
  largefiles: 1 entities for 3 files to upload
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
  comparing with $TESTTMP/issue3651/src
  searching for changes
  1:1acbe71ce432
  2:6095d0695d70
  largefiles to upload (1 entities):
  b
  b1
  b2
  
  $ hg -R clone2 cat -r 1 clone2/.hglf/b
  89e6c98d92887913cadf06b2adb97f26cde4849b
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug --config progress.debug=true
  comparing with $TESTTMP/issue3651/src
  query 1; heads
  searching for changes
  all remote heads known locally
  1:1acbe71ce432
  2:6095d0695d70
  finding outgoing largefiles: 0/2 revisions (0.00%)
  finding outgoing largefiles: 1/2 revisions (50.00%)
  largefiles to upload (1 entities):
  b
      89e6c98d92887913cadf06b2adb97f26cde4849b
  b1
      89e6c98d92887913cadf06b2adb97f26cde4849b
  b2
      89e6c98d92887913cadf06b2adb97f26cde4849b
  

  $ echo bbb > clone2/b
  $ hg -R clone2 commit -m '#3: add new largefile entity as existing file'
  Invoking status precommit hook
  M b
  $ echo bbbb > clone2/b
  $ hg -R clone2 commit -m '#4: add new largefile entity as existing file'
  Invoking status precommit hook
  M b
  $ cp clone2/b1 clone2/b
  $ hg -R clone2 commit -m '#5: refer existing largefile entity again'
  Invoking status precommit hook
  M b
  $ hg -R clone2 summary --large
  parent: 5:036794ea641c tip
   #5: refer existing largefile entity again
  branch: default
  commit: (clean)
  update: (current)
  phases: 6 draft
  largefiles: 3 entities for 3 files to upload
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
  comparing with $TESTTMP/issue3651/src
  searching for changes
  1:1acbe71ce432
  2:6095d0695d70
  3:7983dce246cc
  4:233f12ada4ae
  5:036794ea641c
  largefiles to upload (3 entities):
  b
  b1
  b2
  
  $ hg -R clone2 cat -r 3 clone2/.hglf/b
  c801c9cfe94400963fcb683246217d5db77f9a9a
  $ hg -R clone2 cat -r 4 clone2/.hglf/b
  13f9ed0898e315bf59dc2973fec52037b6f441a2
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug --config progress.debug=true
  comparing with $TESTTMP/issue3651/src
  query 1; heads
  searching for changes
  all remote heads known locally
  1:1acbe71ce432
  2:6095d0695d70
  3:7983dce246cc
  4:233f12ada4ae
  5:036794ea641c
  finding outgoing largefiles: 0/5 revisions (0.00%)
  finding outgoing largefiles: 1/5 revisions (20.00%)
  finding outgoing largefiles: 2/5 revisions (40.00%)
  finding outgoing largefiles: 3/5 revisions (60.00%)
  finding outgoing largefiles: 4/5 revisions (80.00%)
  largefiles to upload (3 entities):
  b
      13f9ed0898e315bf59dc2973fec52037b6f441a2
      89e6c98d92887913cadf06b2adb97f26cde4849b
      c801c9cfe94400963fcb683246217d5db77f9a9a
  b1
      89e6c98d92887913cadf06b2adb97f26cde4849b
  b2
      89e6c98d92887913cadf06b2adb97f26cde4849b
  

Pushing revision #1 causes uploading entity 89e6c98d9288, which is
shared also by largefiles b1, b2 in revision #2 and b in revision #5.

Then, entity 89e6c98d9288 is not treated as "outgoing entity" at "hg
summary" and "hg outgoing", even though files in outgoing revision #2
and #5 refer it.

  $ hg -R clone2 push -r 1 -q
  $ hg -R clone2 summary --large
  parent: 5:036794ea641c tip
   #5: refer existing largefile entity again
  branch: default
  commit: (clean)
  update: (current)
  phases: 6 draft
  largefiles: 2 entities for 1 files to upload
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n"
  comparing with $TESTTMP/issue3651/src
  searching for changes
  2:6095d0695d70
  3:7983dce246cc
  4:233f12ada4ae
  5:036794ea641c
  largefiles to upload (2 entities):
  b
  
  $ hg -R clone2 outgoing --large -T "{rev}:{node|short}\n" --debug --config progress.debug=true
  comparing with $TESTTMP/issue3651/src
  query 1; heads
  searching for changes
  all remote heads known locally
  2:6095d0695d70
  3:7983dce246cc
  4:233f12ada4ae
  5:036794ea641c
  finding outgoing largefiles: 0/4 revisions (0.00%)
  finding outgoing largefiles: 1/4 revisions (25.00%)
  finding outgoing largefiles: 2/4 revisions (50.00%)
  finding outgoing largefiles: 3/4 revisions (75.00%)
  largefiles to upload (2 entities):
  b
      13f9ed0898e315bf59dc2973fec52037b6f441a2
      c801c9cfe94400963fcb683246217d5db77f9a9a
  

  $ cd ..

merge action 'd' for 'local renamed directory to d2/g' which has no filename
==================================================================================

  $ hg init merge-action
  $ cd merge-action
  $ touch l
  $ hg add --large l
  $ mkdir d1
  $ touch d1/f
  $ hg ci -Aqm0
  Invoking status precommit hook
  A d1/f
  A l
  $ echo > d1/f
  $ touch d1/g
  $ hg ci -Aqm1
  Invoking status precommit hook
  M d1/f
  A d1/g
  $ hg up -qr0
  $ hg mv d1 d2
  moving d1/f to d2/f
  $ hg ci -qm2
  Invoking status precommit hook
  A d2/f
  R d1/f
  $ hg merge
  merging d2/f and d1/f to d2/f
  1 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cd ..


Merge conflicts:
=====================

  $ hg init merge
  $ cd merge
  $ echo 0 > f-different
  $ echo 0 > f-same
  $ echo 0 > f-unchanged-1
  $ echo 0 > f-unchanged-2
  $ hg add --large *
  $ hg ci -m0
  Invoking status precommit hook
  A f-different
  A f-same
  A f-unchanged-1
  A f-unchanged-2
  $ echo tmp1 > f-unchanged-1
  $ echo tmp1 > f-unchanged-2
  $ echo tmp1 > f-same
  $ hg ci -m1
  Invoking status precommit hook
  M f-same
  M f-unchanged-1
  M f-unchanged-2
  $ echo 2 > f-different
  $ echo 0 > f-unchanged-1
  $ echo 1 > f-unchanged-2
  $ echo 1 > f-same
  $ hg ci -m2
  Invoking status precommit hook
  M f-different
  M f-same
  M f-unchanged-1
  M f-unchanged-2
  $ hg up -qr0
  $ echo tmp2 > f-unchanged-1
  $ echo tmp2 > f-unchanged-2
  $ echo tmp2 > f-same
  $ hg ci -m3
  Invoking status precommit hook
  M f-same
  M f-unchanged-1
  M f-unchanged-2
  created new head
  $ echo 1 > f-different
  $ echo 1 > f-unchanged-1
  $ echo 0 > f-unchanged-2
  $ echo 1 > f-same
  $ hg ci -m4
  Invoking status precommit hook
  M f-different
  M f-same
  M f-unchanged-1
  M f-unchanged-2
  $ hg merge
  largefile f-different has a merge conflict
  ancestor was 09d2af8dd22201dd8d48e5dcfcaed281ff9422c7
  keep (l)ocal e5fa44f2b31c1fb553b6021e7360d07d5d91ff5e or
  take (o)ther 7448d8798a4380162d4b56f9b452e2f6f9e24e7a? l
  getting changed largefiles
  1 largefiles updated, 0 removed
  0 files updated, 4 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat f-different
  1
  $ cat f-same
  1
  $ cat f-unchanged-1
  1
  $ cat f-unchanged-2
  1
  $ cd ..

Test largefile insulation (do not enabled a side effect
========================================================

Check whether "largefiles" feature is supported only in repositories
enabling largefiles extension.

  $ mkdir individualenabling
  $ cd individualenabling

  $ hg init enabledlocally
  $ echo large > enabledlocally/large
  $ hg -R enabledlocally add --large enabledlocally/large
  $ hg -R enabledlocally commit -m '#0'
  Invoking status precommit hook
  A large

  $ hg init notenabledlocally
  $ echo large > notenabledlocally/large
  $ hg -R notenabledlocally add --large notenabledlocally/large
  $ hg -R notenabledlocally commit -m '#0'
  Invoking status precommit hook
  A large

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > # disable globally
  > largefiles=!
  > EOF
  $ cat >> enabledlocally/.hg/hgrc <<EOF
  > [extensions]
  > # enable locally
  > largefiles=
  > EOF
  $ hg -R enabledlocally root
  $TESTTMP/individualenabling/enabledlocally
  $ hg -R notenabledlocally root
  abort: repository requires features unknown to this Mercurial: largefiles!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]

  $ hg init push-dst
  $ hg -R enabledlocally push push-dst
  pushing to push-dst
  abort: required features are not supported in the destination: largefiles
  [255]

  $ hg init pull-src
  $ hg -R pull-src pull enabledlocally
  pulling from enabledlocally
  abort: required features are not supported in the destination: largefiles
  [255]

  $ hg clone enabledlocally clone-dst
  abort: repository requires features unknown to this Mercurial: largefiles!
  (see https://mercurial-scm.org/wiki/MissingRequirement for more information)
  [255]
  $ test -d clone-dst
  [1]
  $ hg clone --pull enabledlocally clone-pull-dst
  abort: required features are not supported in the destination: largefiles
  [255]
  $ test -d clone-pull-dst
  [1]

#if serve

Test largefiles specific peer setup, when largefiles is enabled
locally (issue4109)

  $ hg showconfig extensions | grep largefiles
  extensions.largefiles=!
  $ mkdir -p $TESTTMP/individualenabling/usercache

  $ hg serve -R enabledlocally -d -p $HGPORT --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg init pull-dst
  $ cat > pull-dst/.hg/hgrc <<EOF
  > [extensions]
  > # enable locally
  > largefiles=
  > [largefiles]
  > # ignore system cache to force largefiles specific wire proto access
  > usercache=$TESTTMP/individualenabling/usercache
  > EOF
  $ hg -R pull-dst -q pull -u http://localhost:$HGPORT

  $ killdaemons.py
#endif

Test overridden functions work correctly even for repos disabling
largefiles (issue4547)

  $ hg showconfig extensions | grep largefiles
  extensions.largefiles=!

(test updating implied by clone)

  $ hg init enabled-but-no-largefiles
  $ echo normal1 > enabled-but-no-largefiles/normal1
  $ hg -R enabled-but-no-largefiles add enabled-but-no-largefiles/normal1
  $ hg -R enabled-but-no-largefiles commit -m '#0@enabled-but-no-largefiles'
  Invoking status precommit hook
  A normal1
  $ cat >> enabled-but-no-largefiles/.hg/hgrc <<EOF
  > [extensions]
  > # enable locally
  > largefiles=
  > EOF
  $ hg clone -q enabled-but-no-largefiles no-largefiles

  $ echo normal2 > enabled-but-no-largefiles/normal2
  $ hg -R enabled-but-no-largefiles add enabled-but-no-largefiles/normal2
  $ hg -R enabled-but-no-largefiles commit -m '#1@enabled-but-no-largefiles'
  Invoking status precommit hook
  A normal2

  $ echo normal3 > no-largefiles/normal3
  $ hg -R no-largefiles add no-largefiles/normal3
  $ hg -R no-largefiles commit -m '#1@no-largefiles'
  Invoking status precommit hook
  A normal3

  $ hg -R no-largefiles -q pull --rebase
  Invoking status precommit hook
  A normal3

(test reverting)

  $ hg init subrepo-root
  $ cat >> subrepo-root/.hg/hgrc <<EOF
  > [extensions]
  > # enable locally
  > largefiles=
  > EOF
  $ echo large > subrepo-root/large
  $ mkdir -p subrepo-root/dir/subdir
  $ echo large2 > subrepo-root/dir/subdir/large.bin
  $ hg -R subrepo-root add --large subrepo-root/large subrepo-root/dir/subdir/large.bin
  $ hg clone -q no-largefiles subrepo-root/no-largefiles
  $ cat > subrepo-root/.hgsub <<EOF
  > no-largefiles = no-largefiles
  > EOF
  $ hg -R subrepo-root add subrepo-root/.hgsub
  $ hg -R subrepo-root commit -m '#0'
  Invoking status precommit hook
  A .hgsub
  A dir/subdir/large.bin
  A large
  ? .hgsubstate
  $ echo dirty >> subrepo-root/large
  $ echo dirty >> subrepo-root/no-largefiles/normal1
  $ hg -R subrepo-root status -S
  M large
  M no-largefiles/normal1
  $ hg -R subrepo-root extdiff -p echo -S --config extensions.extdiff=
  "*\\no-largefiles\\normal1" "*\\no-largefiles\\normal1" (glob) (windows !)
  */no-largefiles/normal1 */no-largefiles/normal1 (glob) (no-windows !)
  [1]
  $ hg -R subrepo-root revert --all
  reverting subrepo-root/.hglf/large
  reverting subrepo no-largefiles
  reverting subrepo-root/no-largefiles/normal1

Move (and then undo) a directory move with only largefiles.

  $ cd subrepo-root
  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir/
  .hglf/dir/subdir/
  .hglf/dir/subdir/large.bin
  .hglf/large
  dir/
  dir/subdir/
  dir/subdir/large.bin
  large
  large.orig

  $ hg mv dir/subdir dir/subdir2
  moving .hglf/dir/subdir/large.bin to .hglf/dir/subdir2/large.bin

  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir/
  .hglf/dir/subdir2/
  .hglf/dir/subdir2/large.bin
  .hglf/large
  dir/
  dir/subdir2/
  dir/subdir2/large.bin
  large
  large.orig
  $ hg status -C
  A dir/subdir2/large.bin
    dir/subdir/large.bin
  R dir/subdir/large.bin
  ? large.orig

  $ echo 'modified' > dir/subdir2/large.bin
  $ hg status -C
  A dir/subdir2/large.bin
    dir/subdir/large.bin
  R dir/subdir/large.bin
  ? large.orig

  $ hg revert --all
  forgetting .hglf/dir/subdir2/large.bin
  undeleting .hglf/dir/subdir/large.bin
  reverting subrepo no-largefiles

  $ hg status -C
  ? dir/subdir2/large.bin
  ? large.orig

The content of the forgotten file shouldn't be clobbered

  $ cat dir/subdir2/large.bin
  modified

The standin for subdir2 should be deleted, not just dropped

  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir/
  .hglf/dir/subdir/
  .hglf/dir/subdir/large.bin
  .hglf/large
  dir/
  dir/subdir/
  dir/subdir/large.bin
  dir/subdir2/
  dir/subdir2/large.bin
  large
  large.orig

  $ rm -r dir/subdir2

'subdir' should not be in the destination.  It would be if the subdir2 directory
existed under .hglf/.
  $ hg mv dir/subdir dir/subdir2
  moving .hglf/dir/subdir/large.bin to .hglf/dir/subdir2/large.bin

  $ hg status -C
  A dir/subdir2/large.bin
    dir/subdir/large.bin
  R dir/subdir/large.bin
  ? large.orig

  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir/
  .hglf/dir/subdir2/
  .hglf/dir/subdir2/large.bin
  .hglf/large
  dir/
  dir/subdir2/
  dir/subdir2/large.bin
  large
  large.orig

Start from scratch, and rename something other than the final path component.

  $ hg up -qC .
  $ hg --config extensions.purge= purge

  $ hg mv dir/subdir dir2/subdir
  moving .hglf/dir/subdir/large.bin to .hglf/dir2/subdir/large.bin

  $ hg status -C
  A dir2/subdir/large.bin
    dir/subdir/large.bin
  R dir/subdir/large.bin

  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir2/
  .hglf/dir2/subdir/
  .hglf/dir2/subdir/large.bin
  .hglf/large
  dir2/
  dir2/subdir/
  dir2/subdir/large.bin
  large

  $ hg revert --all
  forgetting .hglf/dir2/subdir/large.bin
  undeleting .hglf/dir/subdir/large.bin
  reverting subrepo no-largefiles

  $ hg status -C
  ? dir2/subdir/large.bin

  $ "$PYTHON" $TESTDIR/list-tree.py .hglf dir* large*
  .hglf/
  .hglf/dir/
  .hglf/dir/subdir/
  .hglf/dir/subdir/large.bin
  .hglf/large
  dir/
  dir/subdir/
  dir/subdir/large.bin
  dir2/
  dir2/subdir/
  dir2/subdir/large.bin
  large

  $ cd ../..

Test "pull --rebase" when rebase is enabled before largefiles (issue3861)
=========================================================================

  $ hg showconfig extensions | grep largefiles
  extensions.largefiles=!

  $ mkdir issue3861
  $ cd issue3861
  $ hg init src
  $ hg clone -q src dst
  $ echo a > src/a
  $ hg -R src commit -Aqm "#0"
  Invoking status precommit hook
  A a

  $ cat >> dst/.hg/hgrc <<EOF
  > [extensions]
  > largefiles=
  > EOF
  $ hg -R dst pull --rebase
  pulling from $TESTTMP/issue3861/src
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets bf5e395ced2c (1 drafts)
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ..