tests/test-fileset.t

run-tests: collect aggregate code coverage

Before this patch, every Python process during a code coverage run was
writing coverage data to the same file. I'm not sure if the coverage
package even tries to obtain a lock on the file. But what I do know is
there was some last write wins leading to loss of code coverage data, at
least with -j > 1.

This patch changes the code coverage mechanism to be multiple process
safe. The mechanism for initializing code coverage via sitecustomize.py
has been tweaked so each Python process will produce a separate coverage
data file on disk. Unless two processes generate the same random value,
there are no race conditions writing to the same file. At the end of the
test run, we combine all written files into an aggregate report.

On my machine, running the full test suite produces a little over
20,000 coverage files consuming ~350 MB. As you can imagine, it takes
several seconds to load and merge these coverage files. But when it is
done, you have an accurate picture of the aggregate code coverage for the
entire test suite, which is ~60% line coverage.

  $ fileset() {
  >   hg debugfileset "$@"
  > }

  $ hg init repo
  $ cd repo
  $ echo a > a1
  $ echo a > a2
  $ echo b > b1
  $ echo b > b2
  $ hg ci -Am addfiles
  adding a1
  adding a2
  adding b1
  adding b2

Test operators and basic patterns

  $ fileset a1
  a1
  $ fileset 'a*'
  a1
  a2
  $ fileset '"re:a\d"'
  a1
  a2
  $ fileset 'a1 or a2'
  a1
  a2
  $ fileset 'a1 | a2'
  a1
  a2
  $ fileset 'a* and "*1"'
  a1
  $ fileset 'a* & "*1"'
  a1
  $ fileset 'not (r"a*")'
  b1
  b2
  $ fileset '! ("a*")'
  b1
  b2
  $ fileset 'a* - a1'
  a2
  $ fileset 'a_b'

Test files status

  $ rm a1
  $ hg rm a2
  $ echo b >> b2
  $ hg cp b1 c1
  $ echo c > c2
  $ echo c > c3
  $ cat > .hgignore <<EOF
  > \.hgignore
  > 2$
  > EOF
  $ fileset 'modified()'
  b2
  $ fileset 'added()'
  c1
  $ fileset 'removed()'
  a2
  $ fileset 'deleted()'
  a1
  $ fileset 'unknown()'
  c3
  $ fileset 'ignored()'
  .hgignore
  c2
  $ fileset 'hgignore()'
  a2
  b2
  $ fileset 'clean()'
  b1
  $ fileset 'copied()'
  c1

Test files properties

  >>> file('bin', 'wb').write('\0a')
  $ fileset 'binary()'
  $ fileset 'binary() and unknown()'
  bin
  $ echo '^bin$' >> .hgignore
  $ fileset 'binary() and ignored()'
  bin
  $ hg add bin
  $ fileset 'binary()'
  bin

  $ fileset 'grep("b{1}")'
  b2
  c1
  b1
  $ fileset 'grep("missingparens(")'
  hg: parse error: invalid match pattern: unbalanced parenthesis
  [255]

#if execbit
  $ chmod +x b2
  $ fileset 'exec()'
  b2
#endif

#if symlink
  $ ln -s b2 b2link
  $ fileset 'symlink() and unknown()'
  b2link
  $ hg add b2link
#endif

#if no-windows
  $ echo foo > con.xml
  $ fileset 'not portable()'
  con.xml
  $ hg --config ui.portablefilenames=ignore add con.xml
#endif

  >>> file('1k', 'wb').write(' '*1024)
  >>> file('2k', 'wb').write(' '*2048)
  $ hg add 1k 2k
  $ fileset 'size("bar")'
  hg: parse error: couldn't parse size: bar
  [255]
  $ fileset 'size(1k)'
  1k
  $ fileset '(1k or 2k) and size("< 2k")'
  1k
  $ fileset '(1k or 2k) and size("<=2k")'
  1k
  2k
  $ fileset '(1k or 2k) and size("> 1k")'
  2k
  $ fileset '(1k or 2k) and size(">=1K")'
  1k
  2k
  $ fileset '(1k or 2k) and size(".5KB - 1.5kB")'
  1k

Test merge states

  $ hg ci -m manychanges
  $ hg up -C 0
  * files updated, 0 files merged, * files removed, 0 files unresolved (glob)
  $ echo c >> b2
  $ hg ci -m diverging b2
  created new head
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  $ hg merge
  merging b2
  warning: conflicts during merge.
  merging b2 incomplete! (edit conflicts, then use 'hg resolve --mark')
  * files updated, 0 files merged, * files removed, 1 files unresolved (glob)
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ fileset 'resolved()'
  $ fileset 'unresolved()'
  b2
  $ echo e > b2
  $ hg resolve -m b2
  (no more unresolved files)
  $ fileset 'resolved()'
  b2
  $ fileset 'unresolved()'
  $ hg ci -m merge

Test subrepo predicate

  $ hg init sub
  $ echo a > sub/suba
  $ hg -R sub add sub/suba
  $ hg -R sub ci -m sub
  $ echo 'sub = sub' > .hgsub
  $ fileset 'subrepo()'
  $ hg add .hgsub
  $ fileset 'subrepo()'
  sub
  $ fileset 'subrepo("sub")'
  sub
  $ fileset 'subrepo("glob:*")'
  sub
  $ hg ci -m subrepo

Test with a revision

  $ hg log -G --template '{rev} {desc}\n'
  @  4 subrepo
  |
  o    3 merge
  |\
  | o  2 diverging
  | |
  o |  1 manychanges
  |/
  o  0 addfiles
  
  $ echo unknown > unknown
  $ fileset -r1 'modified()'
  b2
  $ fileset -r1 'added() and c1'
  c1
  $ fileset -r1 'removed()'
  a2
  $ fileset -r1 'deleted()'
  $ fileset -r1 'unknown()'
  $ fileset -r1 'ignored()'
  $ fileset -r1 'hgignore()'
  b2
  bin
  $ fileset -r1 'binary()'
  bin
  $ fileset -r1 'size(1k)'
  1k
  $ fileset -r3 'resolved()'
  $ fileset -r3 'unresolved()'

#if execbit
  $ fileset -r1 'exec()'
  b2
#endif

#if symlink
  $ fileset -r1 'symlink()'
  b2link
#endif

#if no-windows
  $ fileset -r1 'not portable()'
  con.xml
  $ hg forget 'con.xml'
#endif

  $ fileset -r4 'subrepo("re:su.*")'
  sub
  $ fileset -r4 'subrepo("sub")'
  sub
  $ fileset -r4 'b2 or c1'
  b2
  c1

  >>> open('dos', 'wb').write("dos\r\n")
  >>> open('mixed', 'wb').write("dos\r\nunix\n")
  >>> open('mac', 'wb').write("mac\r")
  $ hg add dos mixed mac

  $ fileset 'eol(dos)'
  dos
  mixed
  $ fileset 'eol(unix)'
  .hgsub
  .hgsubstate
  a1
  b1
  b2
  c1
  mixed
  $ fileset 'eol(mac)'
  mac